-
-#, fuzzy
-#~ msgid "%s: temporary directory not found"
-#~ msgstr "%s: ਆਰਜੀ ਡਾਇਰੈਕਟਰੀ ਨਹੀਂ ਬਣਾ ਸਕਿਆ"
-
-#~ msgid "unexpected end of file when reading from daemon"
-#~ msgstr "ਡੈਮਨ ਤੋਂ ਪੜਨ ਸਮੇਂ ਅਚਾਨਕ ਫਾਇਲ ਅੰਤ"
-
-#~ msgid "virt-edit: no image, VM names or filenames to edit given"
-#~ msgstr "virt-edit: ਕੋਈ ਈਮੇਜ਼ ਨਹੀਂ, ਸੋਧ ਕਰਨ ਲਈ VM ਨਾਂ ਜਾਂ ਫਾਇਲ-ਨਾਂ ਦਿੱਤੇ ਹਨ"
-
-#~ msgid "File not changed.\n"
-#~ msgstr "ਫਾਇਲ ਤਬਦੀਲ ਨਹੀਂ ਹੋਈ।\n"
-
-#~ msgid "libguestfs-test-tool: failed to mkdir /iso\n"
-#~ msgstr "libguestfs-test-tool: failed to mkdir /iso\n"
-
-#~ msgid "libguestfs-test-tool: failed to mount /dev/sdb on /iso\n"
-#~ msgstr "libguestfs-test-tool: failed to mount /dev/sdb on /iso\n"
-
-#~ msgid ""
-#~ "libguestfs-test-tool: could not run helper program, or helper failed\n"
-#~ msgstr ""
-#~ "libguestfs-test-tool: could not run helper program, or helper failed\n"
-
-#~ msgid ""
-#~ "Test tool helper program 'libguestfs-test-tool-helper' is not\n"
-#~ "available. Expected to find it in '%s'\n"
-#~ "\n"
-#~ "Use the --helper option to specify the location of this program.\n"
-#~ msgstr ""
-#~ "Test tool helper program 'libguestfs-test-tool-helper' is not\n"
-#~ "available. Expected to find it in '%s'\n"
-#~ "\n"
-#~ "Use the --helper option to specify the location of this program.\n"
-
-#~ msgid "command failed: %s"
-#~ msgstr "ਕਮਾਂਡ ਫੇਲ ਹੋਈ: %s"
-
-#~ msgid ""
-#~ "Test tool helper program %s\n"
-#~ "is not statically linked. This is a build error when this test tool\n"
-#~ "was built.\n"
-#~ msgstr ""
-#~ "ਜਾਂਚ ਜੰਤਰ ਸਹਾਇਕ ਪਰੋਗਰਾਮ %s\n"
-#~ "ਸਥਿਰ ਤੌਰ ਤੇ ਸੰਬੰਧਿਤ ਨਹੀਂ। ਇਹ ਬਿਲਡ ਗਲਤੀ ਹੈ ਜਦੋਂ ਇਹ ਜਾਂਚ ਜੰਤਰ\n"
-#~ "ਬਣਾਇਆ ਸੀ।\n"
-
-#~ msgid "mkisofs command failed: %s\n"
-#~ msgstr "mkisofs ਕਮਾਂਡ ਫੇਲ ਹੋਈ: %s\n"
-
-#~ msgid "virt-resize: sorry this program does not work on a 32 bit host\n"
-#~ msgstr "virt-resize: ਮਾਫ ਕਰਨਾ ਇਹ ਪਰੋਗਰਾਮ 32 ਬਿੱਟ ਹੋਸਟਾਂ ਤੇ ਕੰਮ ਨਹੀਂ ਕਰਦਾ\n"
-
-#~ msgid "virt-resize: {file}: does not exist or is not readable\n"
-#~ msgstr "virt-resize: {file}: ਮੌਜੂਦ ਨਹੀਂ ਜਾਂ ਪੜ੍ਹਨਯੋਗ ਨਹੀਂ ਹੈ\n"
-
-#~ msgid ""
-#~ "virt-resize: {file}: does not exist or is not writable\n"
-#~ "You have to create the destination disk before running this program.\n"
-#~ "Please read the virt-resize(1) manpage for more information.\n"
-#~ msgstr ""
-#~ "virt-resize: {file}: ਮੌਜੂਦ ਨਹੀਂ ਹੈ ਜਾਂ ਲਿਖਣਯੋਗ ਨਹੀਂ ਹੈ\n"
-#~ "ਤੁਹਾਨੂੰ ਇਹ ਪਰੋਗਰਾਮ ਚਲਾਉਣ ਤੋਂ ਪਹਿਲਾਂ ਨੀਯਤ ਡਿਸਕ ਬਣਾਉਣੀ ਪਵੇਗੀ।\n"
-#~ "ਵਧੇਰੇ ਜਾਣਕਾਰੀ ਲਈ ਕਿਰਪਾ ਕਰਕੇ virt-resize(1) manpage ਵੇਖੋ।\n"
-
-#~ msgid ""
-#~ "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n"
-#~ msgstr "virt-resize: {file}: ਡਿਸਕ ਈਮੇਜ਼ ਬਣਨ ਲਈ ਫਾਇਲ ਬਹੁਤ ਛੋਟੀ ਹੈ ({sz} bytes)\n"
-
-#~ msgid "virt-resize: short read"
-#~ msgstr "virt-resize: ਸ਼ੌਰਟ ਰੀਡ"
-
-#~ msgid "virt-resize: no logical volume called {n}\n"
-#~ msgstr "virt-resize: {n} ਨਾਂ ਵਾਲਾ ਕੋਈ ਲਾਜੀਕਲ ਵਾਲੀਅਮ ਨਹੀਂ ਹੈ\n"
-
-#~ msgid ""
-#~ "{p}: partition not found in the source disk image, when using the '{opt}' "
-#~ "command line option\n"
-#~ msgstr ""
-#~ "{p}: ਭਾਗ ਸਰੋਤ ਡਿਸਕ ਈਮੇਜ਼ ਉੱਪਰ ਨਹੀਂ ਲੱਭਿਆ, ਜਦੋਂ '{opt}' ਕਮਾਂਡ ਲਾਈਨ ਚੋਣ ਵਰਤੀ ਜਾਂਦੀ ਹੈ\n"
-
-#~ msgid ""
-#~ "{p}: partition ignored, you cannot use it in another command line "
-#~ "argument\n"
-#~ msgstr ""
-#~ "{p}: ਭਾਗ ਰੱਦ ਕੀਤਾ ਗਿਆ ਸੀ, ਤੁਸੀਂ ਇਸਨੂੰ ਹੋਰ ਕਮਾਂਡ ਲਾਈਨ ਆਰਗੂਮੈਂਟ ਵਿੱਚ ਨਹੀਂ ਵਰਤ ਸਕਦੇ\n"
-
-#~ msgid ""
-#~ "{p}: partition deleted, you cannot use it in another command line "
-#~ "argument\n"
-#~ msgstr "{p}: ਭਾਗ ਹਟਾਇਆ ਗਿਆ ਹੈ, ਤੁਸੀਂ ਇਸਨੂੰ ਹੋਰ ਕਮਾਂਡ ਲਾਈਨ ਆਰਗੂਮੈਂਟ ਵਿੱਚ ਨਹੀਂ ਵਰਤ ਸਕਦੇ\n"
-
-#~ msgid "{p}: this partition has already been marked for resizing\n"
-#~ msgstr "{p}: ਇਹ ਭਾਗ ਪਹਿਲਾਂ ਹੀ ਮੁੜ-ਅਕਾਰ ਲਈ ਮਾਰਕ ਕੀਤਾ ਹੋਇਆ ਹੈ\n"
-
-#~ msgid "{p}: missing size field in {o} option\n"
-#~ msgstr "{p}: {o} ਚੋਣ ਵਿੱਚ ਅਕਾਰ ਖੇਤਰ ਗੌਰ-ਮੌਜੂਦ ਹੈ\n"
-
-#~ msgid "{p}: {f}: cannot parse size field\n"
-#~ msgstr "{p}: {f}: ਅਕਾਰ ਖੇਤਰ ਨੂੰ ਪਾਰਸ ਨਹੀਂ ਕਰ ਸਕਦਾ\n"
-
-#~ msgid "{p}: new size is zero or negative\n"
-#~ msgstr "{p}: ਨਵਾਂ ਅਕਾਰ ਸਿਫਰ ਜਾਂ ਰਿਣਾਤਮਕ ਹੈ\n"
-
-#~ msgid ""
-#~ "{p}: cannot make this partition smaller because it contains a\n"
-#~ "filesystem, physical volume or other content that is larger than the new "
-#~ "size.\n"
-#~ "You have to resize the content first, see virt-resize(1).\n"
-#~ msgstr ""
-#~ "{p}: ਇਸ ਭਾਗ ਨੂੰ ਛੋਟਾ ਨਹੀਂ ਬਣਾ ਸਕਦਾ ਕਿਉਂਕਿ ਇਸ ਉੱਪਰ ਫਾਇਲਸਿਸਟਮ, ਭੌਤਿਕ ਵਾਲੀਅਮ ਜਾਂ ਹੋਰ "
-#~ "ਸੰਖੇਪ ਹਨ ਜੋ ਨਵੇਂ ਅਕਾਰ ਤੋਂ ਵੱਡੇ ਹਨ।\n"
-#~ "ਪਹਿਲਾਂ ਤੁਹਾਨੂੰ ਸੰਖੇਪਾਂ ਨੂੰ ਮੁੜ-ਅਕਾਰ ਦੇਣਾ ਪਵੇਗਾ, virt-resize(1) ਵੇਖੋ।\n"
-
-#~ msgid "virt-resize: you cannot use options --expand and --shrink together\n"
-#~ msgstr "virt-resize: ਤੁਸੀਂ ਇਹ ਚੋਣਾਂ ਵਰਤ ਸਕਦੇ ਹੋ --expand and --shrink together\n"
-
-#~ msgid ""
-#~ "virt-resize: error: cannot use --expand when there is no surplus space "
-#~ "to\n"
-#~ "expand into. You need to make the target disk larger by at least {h}.\n"
-#~ msgstr ""
-#~ "virt-resize: ਗਲਤੀ: --expand ਨੂੰ ਵਰਤ ਨਹੀਂ ਸਕਦੇ ਜਦੋਂ ਫੈਲਾਉਣ ਲਈ ਕੋਈ ਵਾਧੂ ਮੈਮੋਰੀ ਨਾ ਹੋਵੇ। "
-#~ "ਤੁਹਾਨੂੰ ਟਾਰਗਿਟ ਡਿਸਕ ਬਣਾਉਣਈ ਚਾਹੀਦੀ ਹੈ ਜਿਸ ਦਾ ਘੱਟੋ-ਘੱਟ ਅਕਾਰ ਹੋਵੇ {h}।\n"
-
-#~ msgid ""
-#~ "virt-resize: error: cannot use --shrink because there is no deficit\n"
-#~ "(see 'deficit' in the virt-resize(1) man page)\n"
-#~ msgstr ""
-#~ "virt-resize: error: cannot use --shrink because there is no deficit\n"
-#~ "(see 'deficit' in the virt-resize(1) man page)\n"
-
-#~ msgid "Summary of changes:\n"
-#~ msgstr "ਤਬਦੀਲੀਆਂ ਦੀ ਜਾਣਕਾਰੀ:\n"
-
-#~ msgid "{p}: partition will be ignored\n"
-#~ msgstr "{p}: ਭਾਗ ਅਣਡਿੱਠਾ ਕੀਤਾ ਜਾਵੇਗਾ\n"
-
-#~ msgid "{p}: partition will be deleted\n"
-#~ msgstr "{p}: ਭਾਗ ਹਟਾਇਆ ਜਾਵੇਗਾ\n"
-
-#~ msgid "{p}: partition will be resized from {oldsize} to {newsize}\n"
-#~ msgstr "{p}: ਭਾਗ {oldsize} ਤੋਂ {newsize} ਨਾਲ ਮੁੜ-ਅਕਾਰ ਕੀਤਾ ਗਿਆ ਹੈ\n"
-
-#~ msgid "{p}: content will be expanded using the '{meth}' method\n"
-#~ msgstr "{p}: ਸੰਖੇਪਾਂ ਨੂੰ'{meth}' ਢੰਗ ਵਰਤ ਕੇ ਫੈਲਾਇਆ ਜਾਵੇਗਾ\n"
-
-#~ msgid "{p}: partition will be left alone\n"
-#~ msgstr "{p}: ਭਾਗ ਇਕੱਲਾ ਛੱਡਿਆ ਜਾਵੇਗਾ\n"
-
-#~ msgid "{n}: LV will be expanded to maximum size\n"
-#~ msgstr "{n}: LV ਨੂੰ ਅਧਿਕਤਮ ਅਕਾਰ ਤੱਕ ਫੈਲਾਇਆ ਜਾਵੇਗਾ\n"
-
-#~ msgid "{n}: content will be expanded using the '{meth}' method\n"
-#~ msgstr "{n}: ਸੰਖੇਪਾਂ ਨੂੰ '{meth}' ਢੰਗ ਵਰਤ ਕੇ ਫੈਲਾਇਆ ਜਾਏਗਾ\n"
-
-#~ msgid "There is a surplus of {spl} bytes ({h}).\n"
-#~ msgstr "{spl} ਬਾਈਟਾਂ ਦੀ ਬਚਤ ਹੈ ({h})।\n"
-
-#~ msgid "An extra partition will be created for the surplus.\n"
-#~ msgstr "ਇੱਕ ਵਾਧੂ ਭਾਗ ਬਚਤ ਲਈ ਬਣਾਇਆ ਜਾਵੇਗਾ।\n"
-
-#~ msgid ""
-#~ "The surplus space is not large enough for an extra partition to be "
-#~ "created\n"
-#~ "and so it will just be ignored.\n"
-#~ msgstr ""
-#~ "ਬਾਕੀ ਸਪੇਸ ਵਾਧੂ ਭਾਗ ਬਣਾਉਣ ਲਈ ਲੋੜੀਂਦੀ ਨਹੀਂ ਹੈ\n"
-#~ "ਅਤੇ ਇਸ ਲਈ ਇਹ ਅਣਡਿੱਠੀ ਕੀਤੀ ਜਾਵੇਗੀ।\n"
-
-#~ msgid ""
-#~ "The surplus space will be ignored. Run a partitioning program in the "
-#~ "guest\n"
-#~ "to partition this extra space if you want.\n"
-#~ msgstr ""
-#~ "ਬਚਤ ਸਪੇਸ ਅਣਡਿੱਠੀ ਕੀਤੀ ਜਾਵੇਗੀ। ਗਿਸਟ ਵਿੱਚ ਵਿਭਾਗੀਕਰਨ ਪਰੋਗਰਾਮ ਚਲਾਓ\n"
-#~ "ਤਾਂ ਜੋ ਇਸ ਵਾਧੂ ਸਪੇਸ ਤੇ ਭਾਗ ਬਣਾਏ ਜਾਣ ਜੇ ਤੁਸੀਂ ਚਾਹੁੰਦੇ ਹੋ।\n"
-
-#~ msgid ""
-#~ "virt-resize: error: there is a deficit of {def} bytes ({h}).\n"
-#~ "You need to make the target disk larger by at least this amount,\n"
-#~ "or adjust your resizing requests.\n"
-#~ msgstr ""
-#~ "virt-resize: error: there is a deficit of {def} bytes ({h}).\n"
-#~ "You need to make the target disk larger by at least this amount,\n"
-#~ "or adjust your resizing requests.\n"
-
-#~ msgid "virt-resize: source disk does not have a first partition\n"
-#~ msgstr "virt-resize: ਸਰੋਤ ਡਿਸਕ ਉੱਪਰ ਪਹਿਲਾਂ ਭਾਗ ਨਹੀਂ ਹੈ\n"
-
-#~ msgid "Copying {p} ...\n"
-#~ msgstr "{p} ਨੂੰ ਕਾਪੀ ਕਰ ਰਿਹਾ ਹੈ ...\n"
-
-#~ msgid "Expanding {p} using the '{meth}' method\n"
-#~ msgstr "{p} ਨੂੰ '{meth}' ਢੱਗ ਵਰਤ ਕੇ ਫੈਲ ਰਿਹਾ ਹੈ\n"
-
-#~ msgid ""
-#~ "error: domain is a live virtual machine.\n"
-#~ "You must use readonly access because write access to a running virtual "
-#~ "machine\n"
-#~ "can cause disk corruption."
-#~ msgstr ""
-#~ "error: domain is a live virtual machine।\n"
-#~ "You must use readonly access because write access to a running virtual "
-#~ "machine\n"
-#~ "can cause disk corruption।"
-
-#, fuzzy
-#~ msgid "failed to create temporary cache directory: %m"
-#~ msgstr "ਆਰਜੀ ਡਾਇਰੈਕਟਰੀ ਬਣਾਓ"
-
-#, fuzzy
-#~ msgid "error renaming temporary cache directory: %m"
-#~ msgstr "ਆਰਜੀ ਡਾਇਰੈਕਟਰੀ ਬਣਾਓ"
-
-#, fuzzy
-#~ msgid "virt-df: cannot use -h and --csv options together\n"
-#~ msgstr "%s: cannot use --listen and --file options at the same time\n"
-
-#, fuzzy
-#~ msgid " Mountpoints:\n"
-#~ msgstr "ਮਾਊਂਟ ਪੁਆਂਇਟ ਵੇਖਾਓ"
-
-#, fuzzy
-#~ msgid " Filesystems:\n"
-#~ msgstr "ਇੱਕ ਫਾਇਲ-ਸਿਸਟਮ ਬਣਾਓ"
-
-#~ msgid "edit a file in the image"
-#~ msgstr "ਈਮੇਜ਼ ਵਿੱਚ ਫਾਇਲ ਸੋਧ ਕਰੋ"
-
-#~ msgid "view a file in the pager"
-#~ msgstr "ਪੇਜਰ ਵਿੱਚ ਫਾਇਲ ਵੇਖੋ"
-
-#~ msgid ""
-#~ "echo - display a line of text\n"
-#~ " echo [<params> ...]\n"
-#~ "\n"
-#~ " This echos the parameters to the terminal.\n"
-#~ msgstr ""
-#~ "echo - display a line of text\n"
-#~ " echo [<params> ...]\n"
-#~ "\n"
-#~ " This echos the parameters to the terminal.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "edit - edit a file in the image\n"
-#~ " edit <filename>\n"
-#~ "\n"
-#~ " This is used to edit a file.\n"
-#~ "\n"
-#~ " It is the equivalent of (and is implemented by)\n"
-#~ " running \"cat\", editing locally, and then \"write\".\n"
-#~ "\n"
-#~ " Normally it uses $EDITOR, but if you use the aliases\n"
-#~ " \"vi\" or \"emacs\" you will get those editors.\n"
-#~ "\n"
-#~ " NOTE: This will not work reliably for large files\n"
-#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
-#~ msgstr ""
-#~ "edit - edit a file in the image\n"
-#~ " edit <filename>\n"
-#~ "\n"
-#~ " This is used to edit a file.\n"
-#~ "\n"
-#~ " It is the equivalent of (and is implemented by)\n"
-#~ " running \"cat\", editing locally, and then \"write-file\".\n"
-#~ "\n"
-#~ " Normally it uses $EDITOR, but if you use the aliases\n"
-#~ " \"vi\" or \"emacs\" you will get those editors.\n"
-#~ "\n"
-#~ " NOTE: This will not work reliably for large files\n"
-#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
-
-#~ msgid ""
-#~ "lcd - local change directory\n"
-#~ " lcd <directory>\n"
-#~ "\n"
-#~ " Change guestfish's current directory. This command is\n"
-#~ " useful if you want to download files to a particular\n"
-#~ " place.\n"
-#~ msgstr ""
-#~ "lcd - local change directory\n"
-#~ " lcd <directory>\n"
-#~ "\n"
-#~ " Change guestfish's current directory. This command is\n"
-#~ " useful if you want to download files to a particular\n"
-#~ " place.\n"
-
-#~ msgid ""
-#~ "glob - expand wildcards in command\n"
-#~ " glob <command> [<args> ...]\n"
-#~ "\n"
-#~ " Glob runs <command> with wildcards expanded in any\n"
-#~ " command args. Note that the command is run repeatedly\n"
-#~ " once for each expanded argument.\n"
-#~ msgstr ""
-#~ "glob - expand wildcards in command\n"
-#~ " glob <command> [<args> ...]\n"
-#~ "\n"
-#~ " Glob runs <command> with wildcards expanded in any\n"
-#~ " command args. Note that the command is run repeatedly\n"
-#~ " once for each expanded argument.\n"
-
-#~ msgid ""
-#~ "more - view a file in the pager\n"
-#~ " more <filename>\n"
-#~ "\n"
-#~ " This is used to view a file in the pager.\n"
-#~ "\n"
-#~ " It is the equivalent of (and is implemented by)\n"
-#~ " running \"cat\" and using the pager.\n"
-#~ "\n"
-#~ " Normally it uses $PAGER, but if you use the alias\n"
-#~ " \"less\" then it always uses \"less\".\n"
-#~ "\n"
-#~ " NOTE: This will not work reliably for large files\n"
-#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
-#~ msgstr ""
-#~ "more - view a file in the pager\n"
-#~ " more <filename>\n"
-#~ "\n"
-#~ " This is used to view a file in the pager.\n"
-#~ "\n"
-#~ " It is the equivalent of (and is implemented by)\n"
-#~ " running \"cat\" and using the pager.\n"
-#~ "\n"
-#~ " Normally it uses $PAGER, but if you use the alias\n"
-#~ " \"less\" then it always uses \"less\".\n"
-#~ "\n"
-#~ " NOTE: This will not work reliably for large files\n"
-#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
-
-#~ msgid ""
-#~ "reopen - close and reopen the libguestfs handle\n"
-#~ " reopen\n"
-#~ "\n"
-#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
-#~ "this normally, because the handle is closed properly when guestfish\n"
-#~ "exits. However this is occasionally useful for testing.\n"
-#~ msgstr ""
-#~ "reopen - close and reopen the libguestfs handle\n"
-#~ " reopen\n"
-#~ "\n"
-#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
-#~ "this normally, because the handle is closed properly when guestfish\n"
-#~ "exits. However this is occasionally useful for testing.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "sparse - allocate a sparse image file\n"
-#~ " sparse <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty sparse file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " In all respects it works the same as the 'alloc'\n"
-#~ " command, except that the image file is allocated\n"
-#~ " sparsely, which means that disk blocks are not assigned\n"
-#~ " to the file until they are needed. Sparse disk files\n"
-#~ " only use space when written to, but they are slower\n"
-#~ " and there is a danger you could run out of real disk\n"
-#~ " space during a write operation.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
-#~ msgstr ""
-#~ "sparse - allocate a sparse image file\n"
-#~ " sparse <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty sparse file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " In all respects it works the same as the 'alloc'\n"
-#~ " command, except that the image file is allocated\n"
-#~ " sparsely, which means that disk blocks are not assigned\n"
-#~ " to the file until they are needed. Sparse disk files\n"
-#~ " only use space when written to, but they are slower\n"
-#~ " and there is a danger you could run out of real disk\n"
-#~ " space during a write operation.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified (where <nn> means a number):\n"
-#~ " <nn> number of kilobytes\n"
-#~ " eg: 1440 standard 3.5\" floppy\n"
-#~ " <nn>K or <nn>KB number of kilobytes\n"
-#~ " <nn>M or <nn>MB number of megabytes\n"
-#~ " <nn>G or <nn>GB number of gigabytes\n"
-#~ " <nn>T or <nn>TB number of terabytes\n"
-#~ " <nn>P or <nn>PB number of petabytes\n"
-#~ " <nn>E or <nn>EB number of exabytes\n"
-#~ " <nn>sects number of 512 byte sectors\n"
-
-#~ msgid ""
-#~ "time - measure time taken to run command\n"
-#~ " time <command> [<args> ...]\n"
-#~ "\n"
-#~ " This runs <command> as usual, and prints the elapsed\n"
-#~ " time afterwards.\n"
-#~ msgstr ""
-#~ "time - measure time taken to run command\n"
-#~ " time <command> [<args> ...]\n"
-#~ "\n"
-#~ " This runs <command> as usual, and prints the elapsed\n"
-#~ " time afterwards.\n"
-
-#~ msgid "external command failed: %s"
-#~ msgstr "ਬਾਹਰੀ ਕਮਾਂਡ ਫੇਲ ਹੋਈ: %s"
-
-#~ msgid "test if file exists"
-#~ msgstr "ਵੇਖੋ ਕੀ ਫਾਇਲ ਮੌਜੂਦ ਹੈ"
-
-#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
-#~ msgstr "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
-
-#~ msgid "failed to connect to vmchannel socket"
-#~ msgstr "vmchannel ਸਾਕਟ ਨਾਲ ਜੁੜਨ ਤੋਂ ਫੇਲ ਹੋਇਆ"
-
-#, fuzzy
-#~ msgid ""
-#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
-#~ "selinux\n"
-#~ msgstr ""
-#~ "%s: cannot use -i option with -a, -m, --listen, --remote or --selinux\n"
-
-#, fuzzy
-#~ msgid "cpio command failed: {error}"
-#~ msgstr "ਕਮਾਂਡ ਫੇਲ ਹੋਈ: %s"
-
-#~ msgid ""
-#~ "alloc - allocate an image\n"
-#~ " alloc <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty (zeroed) file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified (where <nn> means a number):\n"
-#~ " <nn> number of kilobytes\n"
-#~ " eg: 1440 standard 3.5\" floppy\n"
-#~ " <nn>K or <nn>KB number of kilobytes\n"
-#~ " <nn>M or <nn>MB number of megabytes\n"
-#~ " <nn>G or <nn>GB number of gigabytes\n"
-#~ " <nn>T or <nn>TB number of terabytes\n"
-#~ " <nn>P or <nn>PB number of petabytes\n"
-#~ " <nn>E or <nn>EB number of exabytes\n"
-#~ " <nn>sects number of 512 byte sectors\n"
-#~ msgstr ""
-#~ "alloc - allocate an image\n"
-#~ " alloc <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty (zeroed) file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified (where <nn> means a number):\n"
-#~ " <nn> number of kilobytes\n"
-#~ " eg: 1440 standard 3.5\" floppy\n"
-#~ " <nn>K or <nn>KB number of kilobytes\n"
-#~ " <nn>M or <nn>MB number of megabytes\n"
-#~ " <nn>G or <nn>GB number of gigabytes\n"
-#~ " <nn>T or <nn>TB number of terabytes\n"
-#~ " <nn>P or <nn>PB number of petabytes\n"
-#~ " <nn>E or <nn>EB number of exabytes\n"
-#~ " <nn>sects number of 512 byte sectors\n"
-
-#~ msgid "%s: virt-inspector command too long for fixed-size buffer\n"
-#~ msgstr "%s: virt-inspector command too long for fixed-size buffer\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "\n"
-#~ "Welcome to hivexsh, the hivex interactive shell for examining\n"
-#~ "Windows Registry binary hive files.\n"
-#~ "\n"
-#~ "Type: 'help' for help summary\n"
-#~ " 'quit' to quit the shell\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\n"
-#~ "guestfish ਵੱਲੋਂ ਜੀ ਆਇਆ ਨੂੰ, ਵਰਚੁਅਲ ਮਸ਼ੀਨ ਫਾਇਲ-ਸਿਸਟਮ ਨੂੰ ਸੋਧਣ ਲਈ\n"
-#~ "libguestfs ਫਾਇਲ-ਸਿਸਟਮ ਸ਼ੈੱਲ।\n"
-#~ "\n"
-#~ "Type: 'help' for help with commands\n"
-#~ " 'quit' to quit the shell\n"
-#~ "\n"
git.annexia.org / libguestfs.git / blobdiff