+=head1 EXTENDING LIBGUESTFS
+
+=head2 ADDING A NEW API ACTION
+
+Large amounts of boilerplate code in libguestfs (RPC, bindings,
+documentation) are generated, and this makes it easy to extend the
+libguestfs API.
+
+To add a new API action there are two changes:
+
+=over 4
+
+=item 1.
+
+You need to add a description of the call (name, parameters, return
+type, tests, documentation) to C<generator/generator_actions.ml>.
+
+There are two sorts of API action, depending on whether the call goes
+through to the daemon in the appliance, or is serviced entirely by the
+library (see L</ARCHITECTURE> above). L</guestfs_sync> is an example
+of the former, since the sync is done in the appliance.
+L</guestfs_set_trace> is an example of the latter, since a trace flag
+is maintained in the handle and all tracing is done on the library
+side.
+
+Most new actions are of the first type, and get added to the
+C<daemon_functions> list. Each function has a unique procedure number
+used in the RPC protocol which is assigned to that action when we
+publish libguestfs and cannot be reused. Take the latest procedure
+number and increment it.
+
+For library-only actions of the second type, add to the
+C<non_daemon_functions> list. Since these functions are serviced by
+the library and do not travel over the RPC mechanism to the daemon,
+these functions do not need a procedure number, and so the procedure
+number is set to C<-1>.
+
+=item 2.
+
+Implement the action (in C):
+
+For daemon actions, implement the function C<do_E<lt>nameE<gt>> in the
+C<daemon/> directory.
+
+For library actions, implement the function C<guestfs__E<lt>nameE<gt>>
+(note: double underscore) in the C<src/> directory.
+
+In either case, use another function as an example of what to do.
+
+=back
+
+After making these changes, use C<make> to compile.
+
+Note that you don't need to implement the RPC, language bindings,
+manual pages or anything else. It's all automatically generated from
+the OCaml description.
+
+=head2 ADDING TESTS FOR AN API ACTION
+
+You can supply zero or as many tests as you want per API call. The
+tests can either be added as part of the API description
+(C<generator/generator_actions.ml>), or in some rarer cases you may
+want to drop a script into C<regressions/>. Note that adding a script
+to C<regressions/> is slower, so if possible use the first method.
+
+The following describes the test environment used when you add an API
+test in C<generator_actions.ml>.
+
+The test environment has 4 block devices:
+
+=over 4
+
+=item C</dev/sda> 500MB
+
+General block device for testing.
+
+=item C</dev/sdb> 50MB
+
+C</dev/sdb1> is an ext2 filesystem used for testing
+filesystem write operations.
+
+=item C</dev/sdc> 10MB
+
+Used in a few tests where two block devices are needed.
+
+=item C</dev/sdd>
+
+ISO with fixed content (see C<images/test.iso>).
+
+=back
+
+To be able to run the tests in a reasonable amount of time, the
+libguestfs appliance and block devices are reused between tests. So
+don't try testing L</guestfs_kill_subprocess> :-x
+
+Each test starts with an initial scenario, selected using one of the
+C<Init*> expressions, described in C<generator/generator_types.ml>.
+These initialize the disks mentioned above in a particular way as
+documented in C<generator_types.ml>. You should not assume anything
+about the previous contents of other disks that are not initialized.
+
+You can add a prerequisite clause to any individual test. This is a
+run-time check, which, if it fails, causes the test to be skipped.
+Useful if testing a command which might not work on all variations of
+libguestfs builds. A test that has prerequisite of C<Always> means to
+run unconditionally.
+
+In addition, packagers can skip individual tests by setting
+environment variables before running C<make check>.
+
+ SKIP_TEST_<CMD>_<NUM>=1
+
+eg: C<SKIP_TEST_COMMAND_3=1> skips test #3 of L</guestfs_command>.
+
+or:
+
+ SKIP_TEST_<CMD>=1
+
+eg: C<SKIP_TEST_ZEROFREE=1> skips all L</guestfs_zerofree> tests.
+
+Packagers can run only certain tests by setting for example:
+
+ TEST_ONLY="vfs_type zerofree"
+
+See C<capitests/tests.c> for more details of how these environment
+variables work.
+
+=head2 DEBUGGING NEW API ACTIONS
+
+Test new actions work before submitting them.
+
+You can use guestfish to try out new commands.
+
+Debugging the daemon is a problem because it runs inside a minimal
+environment. However you can fprintf messages in the daemon to
+stderr, and they will show up if you use C<guestfish -v>.
+
+=head2 FORMATTING CODE AND OTHER CONVENTIONS
+
+Our C source code generally adheres to some basic code-formatting
+conventions. The existing code base is not totally consistent on this
+front, but we do prefer that contributed code be formatted similarly.
+In short, use spaces-not-TABs for indentation, use 2 spaces for each
+indentation level, and other than that, follow the K&R style.
+
+If you use Emacs, add the following to one of one of your start-up files
+(e.g., ~/.emacs), to help ensure that you get indentation right:
+
+ ;;; In libguestfs, indent with spaces everywhere (not TABs).
+ ;;; Exceptions: Makefile and ChangeLog modes.
+ (add-hook 'find-file-hook
+ '(lambda () (if (and buffer-file-name
+ (string-match "/libguestfs\\>"
+ (buffer-file-name))
+ (not (string-equal mode-name "Change Log"))
+ (not (string-equal mode-name "Makefile")))
+ (setq indent-tabs-mode nil))))
+
+ ;;; When editing C sources in libguestfs, use this style.
+ (defun libguestfs-c-mode ()
+ "C mode with adjusted defaults for use with libguestfs."
+ (interactive)
+ (c-set-style "K&R")
+ (setq c-indent-level 2)
+ (setq c-basic-offset 2))
+ (add-hook 'c-mode-hook
+ '(lambda () (if (string-match "/libguestfs\\>"
+ (buffer-file-name))
+ (libguestfs-c-mode))))
+
+Enable warnings when compiling (and fix any problems this
+finds):
+
+ ./configure --enable-gcc-warnings
+
+Useful targets are:
+
+ make syntax-check # checks the syntax of the C code
+ make check # runs the test suite
+
+=head2 DAEMON CUSTOM PRINTF FORMATTERS
+
+In the daemon code we have created custom printf formatters C<%Q> and
+C<%R>, which are used to do shell quoting.
+
+=over 4
+
+=item %Q
+
+Simple shell quoted string. Any spaces or other shell characters are
+escaped for you.
+
+=item %R
+
+Same as C<%Q> except the string is treated as a path which is prefixed
+by the sysroot.
+
+=back
+
+For example:
+
+ asprintf (&cmd, "cat %R", path);
+
+would produce C<cat /sysroot/some\ path\ with\ spaces>
+
+I<Note:> Do I<not> use these when you are passing parameters to the
+C<command{,r,v,rv}()> functions. These parameters do NOT need to be
+quoted because they are not passed via the shell (instead, straight to
+exec). You probably want to use the C<sysroot_path()> function
+however.
+
+=head2 SUBMITTING YOUR NEW API ACTIONS
+
+Submit patches to the mailing list:
+L<http://www.redhat.com/mailman/listinfo/libguestfs>
+and CC to L<rjones@redhat.com>.
+
+=head2 INTERNATIONALIZATION (I18N) SUPPORT
+
+We support i18n (gettext anyhow) in the library.
+
+However many messages come from the daemon, and we don't translate
+those at the moment. One reason is that the appliance generally has
+all locale files removed from it, because they take up a lot of space.
+So we'd have to readd some of those, as well as copying our PO files
+into the appliance.
+
+Debugging messages are never translated, since they are intended for
+the programmers.
+
+=head2 SOURCE CODE SUBDIRECTORIES
+
+=over 4
+
+=item C<appliance>
+
+The libguestfs appliance, build scripts and so on.
+
+=item C<capitests>
+
+Automated tests of the C API.
+
+=item C<cat>
+
+The L<virt-cat(1)>, L<virt-filesystems(1)> and L<virt-ls(1)> commands
+and documentation.
+
+=item C<contrib>
+
+Outside contributions, experimental parts.
+
+=item C<daemon>
+
+The daemon that runs inside the libguestfs appliance and carries out
+actions.
+
+=item C<df>
+
+L<virt-df(1)> command and documentation.
+
+=item C<edit>
+
+L<virt-edit(1)> command and documentation.
+
+=item C<examples>
+
+C API example code.
+
+=item C<fish>
+
+L<guestfish(1)>, the command-line shell, and various shell scripts
+built on top such as L<virt-copy-in(1)>, L<virt-copy-out(1)>,
+L<virt-tar-in(1)>, L<virt-tar-out(1)>.
+
+=item C<fuse>
+
+L<guestmount(1)>, FUSE (userspace filesystem) built on top of libguestfs.
+
+=item C<generator>
+
+The crucially important generator, used to automatically generate
+large amounts of boilerplate C code for things like RPC and bindings.
+
+=item C<images>
+
+Files used by the test suite.
+
+Some "phony" guest images which we test against.
+
+=item C<inspector>
+
+L<virt-inspector(1)>, the virtual machine image inspector.
+
+=item C<logo>
+
+Logo used on the website. The fish is called Arthur by the way.
+
+=item C<m4>
+
+M4 macros used by autoconf.
+
+=item C<po>
+
+Translations of simple gettext strings.
+
+=item C<po-docs>
+
+The build infrastructure and PO files for translations of manpages and
+POD files. Eventually this will be combined with the C<po> directory,
+but that is rather complicated.
+
+=item C<regressions>
+
+Regression tests.
+
+=item C<rescue>
+
+L<virt-rescue(1)> command and documentation.
+
+=item C<src>
+
+Source code to the C library.
+
+=item C<tools>
+
+Command line tools written in Perl (L<virt-resize(1)> and many others).
+
+=item C<test-tool>
+
+Test tool for end users to test if their qemu/kernel combination
+will work with libguestfs.
+
+=item C<csharp>
+
+=item C<haskell>
+
+=item C<java>
+
+=item C<ocaml>
+
+=item C<php>
+
+=item C<perl>
+
+=item C<python>
+
+=item C<ruby>
+
+Language bindings.
+
+=back
+
+=head1 LIMITS
+
+=head2 PROTOCOL LIMITS
+
+Internally libguestfs uses a message-based protocol to pass API calls
+and their responses to and from a small "appliance" (see L</INTERNALS>
+for plenty more detail about this). The maximum message size used by
+the protocol is slightly less than 4 MB. For some API calls you may
+need to be aware of this limit. The API calls which may be affected
+are individually documented, with a link back to this section of the
+documentation.
+
+A simple call such as L</guestfs_cat> returns its result (the file
+data) in a simple string. Because this string is at some point
+internally encoded as a message, the maximum size that it can return
+is slightly under 4 MB. If the requested file is larger than this
+then you will get an error.
+
+In order to transfer large files into and out of the guest filesystem,
+you need to use particular calls that support this. The sections
+L</UPLOADING> and L</DOWNLOADING> document how to do this.
+
+You might also consider mounting the disk image using our FUSE
+filesystem support (L<guestmount(1)>).
+
+=head2 MAXIMUM NUMBER OF DISKS
+
+When using virtio disks (the default) the current limit is B<25>
+disks.
+
+Virtio itself consumes 1 virtual PCI slot per disk, and PCI is limited
+to 31 slots. However febootstrap only understands disks with names
+C</dev/vda> through C</dev/vdz> (26 letters) and it reserves one disk
+for its own purposes.
+
+We are working to substantially raise this limit in future versions
+but it requires complex changes to qemu.
+
+In future versions of libguestfs it should also be possible to "hot
+plug" disks (add and remove disks after calling L</guestfs_launch>).
+This also requires changes to qemu.
+
+=head2 MAXIMUM NUMBER OF PARTITIONS PER DISK
+
+Virtio limits the maximum number of partitions per disk to B<15>.
+
+This is because it reserves 4 bits for the minor device number (thus
+C</dev/vda>, and C</dev/vda1> through C</dev/vda15>).
+
+If you attach a disk with more than 15 partitions, the extra
+partitions are ignored by libguestfs.
+
+=head2 MAXIMUM SIZE OF A DISK
+
+Probably the limit is between 2**63-1 and 2**64-1 bytes.
+
+We have tested block devices up to 1 exabyte (2**60 or
+1,152,921,504,606,846,976 bytes) using sparse files backed by an XFS
+host filesystem.
+
+Although libguestfs probably does not impose any limit, the underlying
+host storage will. If you store disk images on a host ext4
+filesystem, then the maximum size will be limited by the maximum ext4
+file size (currently 16 TB). If you store disk images as host logical
+volumes then you are limited by the maximum size of an LV.
+
+For the hugest disk image files, we recommend using XFS on the host
+for storage.
+
+=head2 MAXIMUM SIZE OF A PARTITION
+
+The MBR (ie. classic MS-DOS) partitioning scheme uses 32 bit sector
+numbers. Assuming a 512 byte sector size, this means that MBR cannot
+address a partition located beyond 2 TB on the disk.
+
+It is recommended that you use GPT partitions on disks which are
+larger than this size. GPT uses 64 bit sector numbers and so can
+address partitions which are theoretically larger than the largest
+disk we could support.
+
+=head2 MAXIMUM SIZE OF A FILESYSTEM, FILES, DIRECTORIES
+
+This depends on the filesystem type. libguestfs itself does not
+impose any known limit. Consult Wikipedia or the filesystem
+documentation to find out what these limits are.
+
+=head2 MAXIMUM UPLOAD AND DOWNLOAD
+
+The API functions L</guestfs_upload>, L</guestfs_download>,
+L</guestfs_tar_in>, L</guestfs_tar_out> and the like allow unlimited
+sized uploads and downloads.
+
+=head2 INSPECTION LIMITS
+
+The inspection code has several arbitrary limits on things like the
+size of Windows Registry hive it will read, and the length of product
+name. These are intended to stop a malicious guest from consuming
+arbitrary amounts of memory and disk space on the host, and should not
+be reached in practice. See the source code for more information.
+
git.annexia.org / libguestfs.git / blobdiff