+ ("part_del", (RErr, [Device "device"; Int "partnum"]), 233, [],
+ [InitEmpty, Always, TestRun (
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "primary"; "1"; "-1"];
+ ["part_del"; "/dev/sda"; "1"]])],
+ "delete a partition",
+ "\
+This command deletes the partition numbered C<partnum> on C<device>.
+
+Note that in the case of MBR partitioning, deleting an
+extended partition also deletes any logical partitions
+it contains.");
+
+ ("part_get_bootable", (RBool "bootable", [Device "device"; Int "partnum"]), 234, [],
+ [InitEmpty, Always, TestOutputTrue (
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "primary"; "1"; "-1"];
+ ["part_set_bootable"; "/dev/sda"; "1"; "true"];
+ ["part_get_bootable"; "/dev/sda"; "1"]])],
+ "return true if a partition is bootable",
+ "\
+This command returns true if the partition C<partnum> on
+C<device> has the bootable flag set.
+
+See also C<guestfs_part_set_bootable>.");
+
+ ("part_get_mbr_id", (RInt "idbyte", [Device "device"; Int "partnum"]), 235, [FishOutput FishOutputHexadecimal],
+ [InitEmpty, Always, TestOutputInt (
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "primary"; "1"; "-1"];
+ ["part_set_mbr_id"; "/dev/sda"; "1"; "0x7f"];
+ ["part_get_mbr_id"; "/dev/sda"; "1"]], 0x7f)],
+ "get the MBR type byte (ID byte) from a partition",
+ "\
+Returns the MBR type byte (also known as the ID byte) from
+the numbered partition C<partnum>.
+
+Note that only MBR (old DOS-style) partitions have type bytes.
+You will get undefined results for other partition table
+types (see C<guestfs_part_get_parttype>).");
+
+ ("part_set_mbr_id", (RErr, [Device "device"; Int "partnum"; Int "idbyte"]), 236, [],
+ [], (* tested by part_get_mbr_id *)
+ "set the MBR type byte (ID byte) of a partition",
+ "\
+Sets the MBR type byte (also known as the ID byte) of
+the numbered partition C<partnum> to C<idbyte>. Note
+that the type bytes quoted in most documentation are
+in fact hexadecimal numbers, but usually documented
+without any leading \"0x\" which might be confusing.
+
+Note that only MBR (old DOS-style) partitions have type bytes.
+You will get undefined results for other partition table
+types (see C<guestfs_part_get_parttype>).");
+
+ ("checksum_device", (RString "checksum", [String "csumtype"; Device "device"]), 237, [],
+ [InitISOFS, Always, TestOutput (
+ [["checksum_device"; "md5"; "/dev/sdd"]],
+ (Digest.to_hex (Digest.file "images/test.iso")))],
+ "compute MD5, SHAx or CRC checksum of the contents of a device",
+ "\
+This call computes the MD5, SHAx or CRC checksum of the
+contents of the device named C<device>. For the types of
+checksums supported see the C<guestfs_checksum> command.");
+
+ ("lvresize_free", (RErr, [Device "lv"; Int "percent"]), 238, [Optional "lvm2"],
+ [InitNone, Always, TestRun (
+ [["part_disk"; "/dev/sda"; "mbr"];
+ ["pvcreate"; "/dev/sda1"];
+ ["vgcreate"; "VG"; "/dev/sda1"];
+ ["lvcreate"; "LV"; "VG"; "10"];
+ ["lvresize_free"; "/dev/VG/LV"; "100"]])],
+ "expand an LV to fill free space",
+ "\
+This expands an existing logical volume C<lv> so that it fills
+C<pc>% of the remaining free space in the volume group. Commonly
+you would call this with pc = 100 which expands the logical volume
+as much as possible, using all remaining free space in the volume
+group.");
+
+ ("aug_clear", (RErr, [String "augpath"]), 239, [Optional "augeas"],
+ [], (* XXX Augeas code needs tests. *)
+ "clear Augeas path",
+ "\
+Set the value associated with C<path> to C<NULL>. This
+is the same as the L<augtool(1)> C<clear> command.");
+
+ ("get_umask", (RInt "mask", []), 240, [FishOutput FishOutputOctal],
+ [InitEmpty, Always, TestOutputInt (
+ [["get_umask"]], 0o22)],
+ "get the current umask",
+ "\
+Return the current umask. By default the umask is C<022>
+unless it has been set by calling C<guestfs_umask>.");
+
+ ("debug_upload", (RErr, [FileIn "filename"; String "tmpname"; Int "mode"]), 241, [],
+ [],
+ "upload a file to the appliance (internal use only)",
+ "\
+The C<guestfs_debug_upload> command uploads a file to
+the libguestfs appliance.
+
+There is no comprehensive help for this command. You have
+to look at the file C<daemon/debug.c> in the libguestfs source
+to find out what it is for.");
+
+ ("base64_in", (RErr, [FileIn "base64file"; Pathname "filename"]), 242, [],
+ [InitBasicFS, Always, TestOutput (
+ [["base64_in"; "../images/hello.b64"; "/hello"];
+ ["cat"; "/hello"]], "hello\n")],
+ "upload base64-encoded data to file",
+ "\
+This command uploads base64-encoded data from C<base64file>
+to C<filename>.");
+
+ ("base64_out", (RErr, [Pathname "filename"; FileOut "base64file"]), 243, [],
+ [],
+ "download file and encode as base64",
+ "\
+This command downloads the contents of C<filename>, writing
+it out to local file C<base64file> encoded as base64.");
+
+ ("checksums_out", (RErr, [String "csumtype"; Pathname "directory"; FileOut "sumsfile"]), 244, [],
+ [],
+ "compute MD5, SHAx or CRC checksum of files in a directory",
+ "\
+This command computes the checksums of all regular files in
+C<directory> and then emits a list of those checksums to
+the local output file C<sumsfile>.
+
+This can be used for verifying the integrity of a virtual
+machine. However to be properly secure you should pay
+attention to the output of the checksum command (it uses
+the ones from GNU coreutils). In particular when the
+filename is not printable, coreutils uses a special
+backslash syntax. For more information, see the GNU
+coreutils info file.");
+
+ ("fill_pattern", (RErr, [String "pattern"; Int "len"; Pathname "path"]), 245, [],
+ [InitBasicFS, Always, TestOutputBuffer (
+ [["fill_pattern"; "abcdefghijklmnopqrstuvwxyz"; "28"; "/test"];
+ ["read_file"; "/test"]], "abcdefghijklmnopqrstuvwxyzab")],
+ "fill a file with a repeating pattern of bytes",
+ "\
+This function is like C<guestfs_fill> except that it creates
+a new file of length C<len> containing the repeating pattern
+of bytes in C<pattern>. The pattern is truncated if necessary
+to ensure the length of the file is exactly C<len> bytes.");
+
+ ("write", (RErr, [Pathname "path"; BufferIn "content"]), 246, [ProtocolLimitWarning],
+ [InitBasicFS, Always, TestOutput (
+ [["write"; "/new"; "new file contents"];
+ ["cat"; "/new"]], "new file contents");
+ InitBasicFS, Always, TestOutput (
+ [["write"; "/new"; "\nnew file contents\n"];
+ ["cat"; "/new"]], "\nnew file contents\n");
+ InitBasicFS, Always, TestOutput (
+ [["write"; "/new"; "\n\n"];
+ ["cat"; "/new"]], "\n\n");
+ InitBasicFS, Always, TestOutput (
+ [["write"; "/new"; ""];
+ ["cat"; "/new"]], "");
+ InitBasicFS, Always, TestOutput (
+ [["write"; "/new"; "\n\n\n"];
+ ["cat"; "/new"]], "\n\n\n");
+ InitBasicFS, Always, TestOutput (
+ [["write"; "/new"; "\n"];
+ ["cat"; "/new"]], "\n")],
+ "create a new file",
+ "\
+This call creates a file called C<path>. The content of the
+file is the string C<content> (which can contain any 8 bit data).");
+
+ ("pwrite", (RInt "nbytes", [Pathname "path"; BufferIn "content"; Int64 "offset"]), 247, [ProtocolLimitWarning],
+ [InitBasicFS, Always, TestOutput (
+ [["write"; "/new"; "new file contents"];
+ ["pwrite"; "/new"; "data"; "4"];
+ ["cat"; "/new"]], "new data contents");
+ InitBasicFS, Always, TestOutput (
+ [["write"; "/new"; "new file contents"];
+ ["pwrite"; "/new"; "is extended"; "9"];
+ ["cat"; "/new"]], "new file is extended");
+ InitBasicFS, Always, TestOutput (
+ [["write"; "/new"; "new file contents"];
+ ["pwrite"; "/new"; ""; "4"];
+ ["cat"; "/new"]], "new file contents")],
+ "write to part of a file",
+ "\
+This command writes to part of a file. It writes the data
+buffer C<content> to the file C<path> starting at offset C<offset>.
+
+This command implements the L<pwrite(2)> system call, and like
+that system call it may not write the full data requested. The
+return value is the number of bytes that were actually written
+to the file. This could even be 0, although short writes are
+unlikely for regular files in ordinary circumstances.
+
+See also C<guestfs_pread>.");
+
+ ("resize2fs_size", (RErr, [Device "device"; Int64 "size"]), 248, [],
+ [],
+ "resize an ext2, ext3 or ext4 filesystem (with size)",
+ "\
+This command is the same as C<guestfs_resize2fs> except that it
+allows you to specify the new size (in bytes) explicitly.");
+
+ ("pvresize_size", (RErr, [Device "device"; Int64 "size"]), 249, [Optional "lvm2"],
+ [],
+ "resize an LVM physical volume (with size)",
+ "\
+This command is the same as C<guestfs_pvresize> except that it
+allows you to specify the new size (in bytes) explicitly.");
+
+ ("ntfsresize_size", (RErr, [Device "device"; Int64 "size"]), 250, [Optional "ntfsprogs"],
+ [],
+ "resize an NTFS filesystem (with size)",
+ "\
+This command is the same as C<guestfs_ntfsresize> except that it
+allows you to specify the new size (in bytes) explicitly.");
+
+ ("available_all_groups", (RStringList "groups", []), 251, [],
+ [InitNone, Always, TestRun [["available_all_groups"]]],
+ "return a list of all optional groups",
+ "\
+This command returns a list of all optional groups that this
+daemon knows about. Note this returns both supported and unsupported
+groups. To find out which ones the daemon can actually support
+you have to call C<guestfs_available> on each member of the
+returned list.
+
+See also C<guestfs_available> and L<guestfs(3)/AVAILABILITY>.");
+
+ ("fallocate64", (RErr, [Pathname "path"; Int64 "len"]), 252, [],
+ [InitBasicFS, Always, TestOutputStruct (
+ [["fallocate64"; "/a"; "1000000"];
+ ["stat"; "/a"]], [CompareWithInt ("size", 1_000_000)])],
+ "preallocate a file in the guest filesystem",
+ "\
+This command preallocates a file (containing zero bytes) named
+C<path> of size C<len> bytes. If the file exists already, it
+is overwritten.
+
+Note that this call allocates disk blocks for the file.
+To create a sparse file use C<guestfs_truncate_size> instead.
+
+The deprecated call C<guestfs_fallocate> does the same,
+but owing to an oversight it only allowed 30 bit lengths
+to be specified, effectively limiting the maximum size
+of files created through that call to 1GB.
+
+Do not confuse this with the guestfish-specific
+C<alloc> and C<sparse> commands which create
+a file in the host and attach it as a device.");
+
+ ("vfs_label", (RString "label", [Device "device"]), 253, [],
+ [InitBasicFS, Always, TestOutput (
+ [["set_e2label"; "/dev/sda1"; "LTEST"];
+ ["vfs_label"; "/dev/sda1"]], "LTEST")],
+ "get the filesystem label",
+ "\
+This returns the filesystem label of the filesystem on
+C<device>.
+
+If the filesystem is unlabeled, this returns the empty string.");
+
+ ("vfs_uuid", (RString "uuid", [Device "device"]), 254, [],
+ (let uuid = uuidgen () in
+ [InitBasicFS, Always, TestOutput (
+ [["set_e2uuid"; "/dev/sda1"; uuid];
+ ["vfs_uuid"; "/dev/sda1"]], uuid)]),
+ "get the filesystem UUID",
+ "\
+This returns the filesystem UUID of the filesystem on
+C<device>.
+
+If the filesystem does not have a UUID, this returns the empty string.");
+
+ ("lvm_set_filter", (RErr, [DeviceList "devices"]), 255, [Optional "lvm2"],
+ (* Can't be tested with the current framework because
+ * the VG is being used by the mounted filesystem, so
+ * the vgchange -an command we do first will fail.
+ *)
+ [],
+ "set LVM device filter",
+ "\
+This sets the LVM device filter so that LVM will only be
+able to \"see\" the block devices in the list C<devices>,
+and will ignore all other attached block devices.
+
+Where disk image(s) contain duplicate PVs or VGs, this
+command is useful to get LVM to ignore the duplicates, otherwise
+LVM can get confused. Note also there are two types
+of duplication possible: either cloned PVs/VGs which have
+identical UUIDs; or VGs that are not cloned but just happen
+to have the same name. In normal operation you cannot
+create this situation, but you can do it outside LVM, eg.
+by cloning disk images or by bit twiddling inside the LVM
+metadata.
+
+This command also clears the LVM cache and performs a volume
+group scan.
+
+You can filter whole block devices or individual partitions.
+
+You cannot use this if any VG is currently in use (eg.
+contains a mounted filesystem), even if you are not
+filtering out that VG.");
+
+ ("lvm_clear_filter", (RErr, []), 256, [],
+ [], (* see note on lvm_set_filter *)
+ "clear LVM device filter",
+ "\
+This undoes the effect of C<guestfs_lvm_set_filter>. LVM
+will be able to see every block device.
+
+This command also clears the LVM cache and performs a volume
+group scan.");
+
+ ("luks_open", (RErr, [Device "device"; Key "key"; String "mapname"]), 257, [Optional "luks"],
+ [],
+ "open a LUKS-encrypted block device",
+ "\
+This command opens a block device which has been encrypted
+according to the Linux Unified Key Setup (LUKS) standard.
+
+C<device> is the encrypted block device or partition.
+
+The caller must supply one of the keys associated with the
+LUKS block device, in the C<key> parameter.
+
+This creates a new block device called C</dev/mapper/mapname>.
+Reads and writes to this block device are decrypted from and
+encrypted to the underlying C<device> respectively.
+
+If this block device contains LVM volume groups, then
+calling C<guestfs_vgscan> followed by C<guestfs_vg_activate_all>
+will make them visible.");
+
+ ("luks_open_ro", (RErr, [Device "device"; Key "key"; String "mapname"]), 258, [Optional "luks"],
+ [],
+ "open a LUKS-encrypted block device read-only",
+ "\
+This is the same as C<guestfs_luks_open> except that a read-only
+mapping is created.");
+
+ ("luks_close", (RErr, [Device "device"]), 259, [Optional "luks"],
+ [],
+ "close a LUKS device",
+ "\
+This closes a LUKS device that was created earlier by
+C<guestfs_luks_open> or C<guestfs_luks_open_ro>. The
+C<device> parameter must be the name of the LUKS mapping
+device (ie. C</dev/mapper/mapname>) and I<not> the name
+of the underlying block device.");
+
+ ("luks_format", (RErr, [Device "device"; Key "key"; Int "keyslot"]), 260, [Optional "luks"; DangerWillRobinson],
+ [],
+ "format a block device as a LUKS encrypted device",
+ "\
+This command erases existing data on C<device> and formats
+the device as a LUKS encrypted device. C<key> is the
+initial key, which is added to key slot C<slot>. (LUKS
+supports 8 key slots, numbered 0-7).");
+
+ ("luks_format_cipher", (RErr, [Device "device"; Key "key"; Int "keyslot"; String "cipher"]), 261, [Optional "luks"; DangerWillRobinson],
+ [],
+ "format a block device as a LUKS encrypted device",
+ "\
+This command is the same as C<guestfs_luks_format> but
+it also allows you to set the C<cipher> used.");
+
+ ("luks_add_key", (RErr, [Device "device"; Key "key"; Key "newkey"; Int "keyslot"]), 262, [Optional "luks"],
+ [],
+ "add a key on a LUKS encrypted device",
+ "\
+This command adds a new key on LUKS device C<device>.
+C<key> is any existing key, and is used to access the device.
+C<newkey> is the new key to add. C<keyslot> is the key slot
+that will be replaced.
+
+Note that if C<keyslot> already contains a key, then this
+command will fail. You have to use C<guestfs_luks_kill_slot>
+first to remove that key.");
+
+ ("luks_kill_slot", (RErr, [Device "device"; Key "key"; Int "keyslot"]), 263, [Optional "luks"],
+ [],
+ "remove a key from a LUKS encrypted device",
+ "\
+This command deletes the key in key slot C<keyslot> from the
+encrypted LUKS device C<device>. C<key> must be one of the
+I<other> keys.");
+
+ ("is_lv", (RBool "lvflag", [Device "device"]), 264, [Optional "lvm2"],
+ [InitBasicFSonLVM, IfAvailable "lvm2", TestOutputTrue (
+ [["is_lv"; "/dev/VG/LV"]]);
+ InitBasicFSonLVM, IfAvailable "lvm2", TestOutputFalse (
+ [["is_lv"; "/dev/sda1"]])],
+ "test if device is a logical volume",
+ "\
+This command tests whether C<device> is a logical volume, and
+returns true iff this is the case.");
+
git.annexia.org / libguestfs.git / blobdiff