(* This script generates a large amount of code and documentation for
* all the daemon actions.
- *
+ *
* To add a new action there are only two files you need to change,
* this one to describe the interface (see the big table of
* 'daemon_functions' below), and daemon/<somefile>.c to write the
* implementation.
- *
+ *
* After editing this file, run it (./src/generator.ml) to regenerate
* all the output files. 'make' will rerun this automatically when
* necessary. Note that if you are using a separate build directory
* you must run generator.ml from the _source_ directory.
- *
+ *
* IMPORTANT: This script should NOT print any warnings. If it prints
* warnings, you should treat them as errors.
*
#load "unix.cma";;
#load "str.cma";;
#directory "+xml-light";;
+#directory "+../pkg-lib/xml-light";; (* for GODI users *)
#load "xml-light.cma";;
open Unix
(* As for 'If' but the test runs _unless_ the code returns true. *)
| Unless of string
+ (* Run the test only if 'string' is available in the daemon. *)
+ | IfAvailable of string
+
(* Some initial scenarios for testing. *)
and test_init =
(* Do nothing, block devices could contain random stuff including
This is equivalent to the qemu parameter
C<-drive file=filename,cache=off,if=...>.
+
C<cache=off> is omitted in cases where it is not supported by
the underlying filesystem.
+C<if=...> is set at compile time by the configuration option
+C<./configure --with-drive-if=...>. In the rare case where you
+might need to change this at run time, use C<guestfs_add_drive_with_if>
+or C<guestfs_add_drive_ro_with_if>.
+
Note that this call checks for the existence of C<filename>. This
stops you from specifying other types of drive which are supported
by qemu such as C<nbd:> and C<http:> URLs. To specify those, use
This is equivalent to the qemu parameter C<-cdrom filename>.
-Note that this call checks for the existence of C<filename>. This
+Notes:
+
+=over 4
+
+=item *
+
+This call checks for the existence of C<filename>. This
stops you from specifying other types of drive which are supported
by qemu such as C<nbd:> and C<http:> URLs. To specify those, use
-the general C<guestfs_config> call instead.");
+the general C<guestfs_config> call instead.
+
+=item *
+
+If you just want to add an ISO file (often you use this as an
+efficient way to transfer large files into the guest), then you
+should probably use C<guestfs_add_drive_ro> instead.
+
+=back");
("add_drive_ro", (RErr, [String "filename"]), -1, [FishAlias "add-ro"],
[],
changes to be committed, although qemu can support this.
This is equivalent to the qemu parameter
-C<-drive file=filename,snapshot=on,if=...>.
+C<-drive file=filename,snapshot=on,readonly=on,if=...>.
+
+C<if=...> is set at compile time by the configuration option
+C<./configure --with-drive-if=...>. In the rare case where you
+might need to change this at run time, use C<guestfs_add_drive_with_if>
+or C<guestfs_add_drive_ro_with_if>.
+
+C<readonly=on> is only added where qemu supports this option.
Note that this call checks for the existence of C<filename>. This
stops you from specifying other types of drive which are supported
C<value> can be NULL.");
- ("set_qemu", (RErr, [String "qemu"]), -1, [FishAlias "qemu"],
+ ("set_qemu", (RErr, [OptString "qemu"]), -1, [FishAlias "qemu"],
[],
"set the qemu binary",
"\
You can also override this by setting the C<LIBGUESTFS_QEMU>
environment variable.
-Setting C<qemu> to C<NULL> restores the default qemu binary.");
+Setting C<qemu> to C<NULL> restores the default qemu binary.
+
+Note that you should call this function as early as possible
+after creating the handle. This is because some pre-launch
+operations depend on testing qemu features (by running C<qemu -help>).
+If the qemu binary changes, we don't retest features, and
+so you might see inconsistent results. Using the environment
+variable C<LIBGUESTFS_QEMU> is safest of all since that picks
+the qemu binary at the same time as the handle is created.");
("get_qemu", (RConstString "qemu", []), -1, [],
[InitNone, Always, TestRun (
This is always non-NULL. If it wasn't set already, then this will
return the default qemu binary name.");
- ("set_path", (RErr, [String "searchpath"]), -1, [FishAlias "path"],
+ ("set_path", (RErr, [OptString "searchpath"]), -1, [FishAlias "path"],
[],
"set the search path",
"\
This call was added in version C<1.0.58>. In previous
versions of libguestfs there was no way to get the version
-number. From C code you can use ELF weak linking tricks to find out if
-this symbol exists (if it doesn't, then it's an earlier version).
+number. From C code you can use dynamic linker functions
+to find out if this symbol exists (if it doesn't, then
+it's an earlier version).
The call returns a structure with four elements. The first
three (C<major>, C<minor> and C<release>) are numbers and
To construct the original version string:
C<$major.$minor.$release$extra>
+See also: L<guestfs(3)/LIBGUESTFS VERSION NUMBERS>.
+
I<Note:> Don't use this call to test for availability
-of features. Distro backports makes this unreliable. Use
-C<guestfs_available> instead.");
+of features. In enterprise distributions we backport
+features from later versions into earlier versions,
+making this an unreliable way to test for features.
+Use C<guestfs_available> instead.");
("set_selinux", (RErr, [Bool "selinux"]), -1, [FishAlias "selinux"],
[InitNone, Always, TestOutputTrue (
"\
Return the recovery process enabled flag.");
+ ("add_drive_with_if", (RErr, [String "filename"; String "iface"]), -1, [],
+ [],
+ "add a drive specifying the QEMU block emulation to use",
+ "\
+This is the same as C<guestfs_add_drive> but it allows you
+to specify the QEMU interface emulation to use at run time.");
+
+ ("add_drive_ro_with_if", (RErr, [String "filename"; String "iface"]), -1, [],
+ [],
+ "add a drive read-only specifying the QEMU block emulation to use",
+ "\
+This is the same as C<guestfs_add_drive_ro> but it allows you
+to specify the QEMU interface emulation to use at run time.");
+
]
(* daemon_functions are any functions which cause some action
The mounted filesystem is writable, if we have sufficient permissions
on the underlying device.
-The filesystem options C<sync> and C<noatime> are set with this
-call, in order to improve reliability.");
+B<Important note:>
+When you use this call, the filesystem options C<sync> and C<noatime>
+are set implicitly. This was originally done because we thought it
+would improve reliability, but it turns out that I<-o sync> has a
+very large negative performance impact and negligible effect on
+reliability. Therefore we recommend that you avoid using
+C<guestfs_mount> in any code that needs performance, and instead
+use C<guestfs_mount_options> (use an empty string for the first
+parameter if you don't want any options).");
("sync", (RErr, []), 2, [],
[ InitEmpty, Always, TestRun [["sync"]]],
I<Note>: When using this command from guestfish, C<mode>
by default would be decimal, unless you prefix it with
-C<0> to get octal, ie. use C<0700> not C<700>.");
+C<0> to get octal, ie. use C<0700> not C<700>.
+
+The mode actually set is affected by the umask.");
("chown", (RErr, [Int "owner"; Int "group"; Pathname "path"]), 35, [],
[], (* XXX Need stat command to test *)
["lvs"]],
["/dev/VG1/LV1"; "/dev/VG1/LV2";
"/dev/VG2/LV3"; "/dev/VG2/LV4"; "/dev/VG2/LV5"])],
- "create an LVM volume group",
+ "create an LVM logical volume",
"\
-This creates an LVM volume group called C<logvol>
+This creates an LVM logical volume called C<logvol>
on the volume group C<volgroup>, with C<size> megabytes.");
("mkfs", (RErr, [String "fstype"; Device "device"]), 42, [],
[InitEmpty, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["write_file"; "/new"; "new file contents"; "0"];
["cat"; "/new"]], "new file contents")],
"make a filesystem",
["cat"; "/new"]], "\n\n\n");
InitBasicFS, Always, TestOutput (
[["write_file"; "/new"; "\n"; "0"];
- ["cat"; "/new"]], "\n")],
+ ["cat"; "/new"]], "\n");
+ (* Regression test for RHBZ#597135. *)
+ InitBasicFS, Always, TestLastFail
+ [["write_file"; "/new"; "abc"; "10000"]]],
"create a file",
"\
This call creates a file called C<path>. The contents of the
[InitEmpty, Always, TestOutputListOfDevices (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["mounts"]], ["/dev/sda1"]);
InitEmpty, Always, TestOutputList (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["umount"; "/"];
["mounts"]], [])],
"unmount a filesystem",
["mkfs"; "ext2"; "/dev/sda1"];
["mkfs"; "ext2"; "/dev/sda2"];
["mkfs"; "ext2"; "/dev/sda3"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["mkdir"; "/mp1"];
- ["mount"; "/dev/sda2"; "/mp1"];
+ ["mount_options"; ""; "/dev/sda2"; "/mp1"];
["mkdir"; "/mp1/mp2"];
- ["mount"; "/dev/sda3"; "/mp1/mp2"];
+ ["mount_options"; ""; "/dev/sda3"; "/mp1/mp2"];
["mkdir"; "/mp1/mp2/mp3"];
["umount_all"];
["mounts"]], [])],
"\
This is the same as the C<guestfs_mount> command, but it
allows you to set the mount options as for the
-L<mount(8)> I<-o> flag.");
+L<mount(8)> I<-o> flag.
+
+If the C<options> parameter is an empty string, then
+no options are passed (all options default to whatever
+the filesystem uses).");
("mount_vfs", (RErr, [String "options"; String "vfstype"; Device "device"; String "mountpoint"]), 75, [],
[],
"install GRUB",
"\
This command installs GRUB (the Grand Unified Bootloader) on
-C<device>, with the root directory being C<root>.");
+C<device>, with the root directory being C<root>.
+
+Note: If grub-install reports the error
+\"No suitable drive was found in the generated device map.\"
+it may be that you need to create a C</boot/grub/device.map>
+file first that contains the mapping between grub device names
+and Linux device names. It is usually sufficient to create
+a file containing:
+
+ (hd0) /dev/vda
+
+replacing C</dev/vda> with the name of the installation device.");
("cp", (RErr, [Pathname "src"; Pathname "dest"]), 87, [],
[InitBasicFS, Always, TestOutput (
"print the printable strings in a file",
"\
This is like the C<guestfs_strings> command, but allows you to
-specify the encoding.
+specify the encoding of strings that are looked for in
+the source file C<path>.
+
+Allowed encodings are:
+
+=over 4
+
+=item s
-See the L<strings(1)> manpage for the full list of encodings.
+Single 7-bit-byte characters like ASCII and the ASCII-compatible
+parts of ISO-8859-X (this is what C<guestfs_strings> uses).
-Commonly useful encodings are C<l> (lower case L) which will
-show strings inside Windows/x86 files.
+=item S
+
+Single 8-bit-byte characters.
+
+=item b
+
+16-bit big endian strings such as those encoded in
+UTF-16BE or UCS-2BE.
+
+=item l (lower case letter L)
+
+16-bit little endian such as UTF-16LE and UCS-2LE.
+This is useful for examining binaries in Windows guests.
+
+=item B
+
+32-bit big endian such as UCS-4BE.
+
+=item L
+
+32-bit little endian such as UCS-4LE.
+
+=back
The returned strings are transcoded to UTF-8.");
[InitNone, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext3"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["write_file"; "/new"; "test file"; "0"];
["umount"; "/dev/sda1"];
["zerofree"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["cat"; "/new"]], "test file")],
"zero unused inodes and disk blocks on ext2/3 filesystem",
"\
["vgcreate"; "VG"; "/dev/sda1"];
["lvcreate"; "LV"; "VG"; "10"];
["mkfs"; "ext2"; "/dev/VG/LV"];
- ["mount"; "/dev/VG/LV"; "/"];
+ ["mount_options"; ""; "/dev/VG/LV"; "/"];
["write_file"; "/new"; "test content"; "0"];
["umount"; "/"];
["lvresize"; "/dev/VG/LV"; "20"];
["e2fsck_f"; "/dev/VG/LV"];
["resize2fs"; "/dev/VG/LV"];
- ["mount"; "/dev/VG/LV"; "/"];
- ["cat"; "/new"]], "test content")],
+ ["mount_options"; ""; "/dev/VG/LV"; "/"];
+ ["cat"; "/new"]], "test content");
+ InitNone, Always, TestRun (
+ (* Make an LV smaller to test RHBZ#587484. *)
+ [["part_disk"; "/dev/sda"; "mbr"];
+ ["pvcreate"; "/dev/sda1"];
+ ["vgcreate"; "VG"; "/dev/sda1"];
+ ["lvcreate"; "LV"; "VG"; "20"];
+ ["lvresize"; "/dev/VG/LV"; "10"]])],
"resize an LVM logical volume",
"\
This resizes (expands or shrinks) an existing LVM logical
("resize2fs", (RErr, [Device "device"]), 106, [],
[], (* lvresize tests this *)
- "resize an ext2/ext3 filesystem",
+ "resize an ext2, ext3 or ext4 filesystem",
"\
-This resizes an ext2 or ext3 filesystem to match the size of
+This resizes an ext2, ext3 or ext4 filesystem to match the size of
the underlying device.
I<Note:> It is sometimes required that you run C<guestfs_e2fsck_f>
The C<mode> parameter should be the mode, using the standard
constants. C<devmajor> and C<devminor> are the
device major and minor numbers, only used when creating block
-and character special devices.");
+and character special devices.
+
+Note that, just like L<mknod(2)>, the mode must be bitwise
+OR'd with S_IFBLK, S_IFCHR, S_IFIFO or S_IFSOCK (otherwise this call
+just creates a regular file). These constants are
+available in the standard Linux header files, or you can use
+C<guestfs_mknod_b>, C<guestfs_mknod_c> or C<guestfs_mkfifo>
+which are wrappers around this command which bitwise OR
+in the appropriate constant for you.
+
+The mode actually set is affected by the umask.");
("mkfifo", (RErr, [Int "mode"; Pathname "path"]), 134, [Optional "mknod"],
[InitBasicFS, Always, TestOutputStruct (
"\
This call creates a FIFO (named pipe) called C<path> with
mode C<mode>. It is just a convenient wrapper around
-C<guestfs_mknod>.");
+C<guestfs_mknod>.
+
+The mode actually set is affected by the umask.");
("mknod_b", (RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"]), 135, [Optional "mknod"],
[InitBasicFS, Always, TestOutputStruct (
"\
This call creates a block device node called C<path> with
mode C<mode> and device major/minor C<devmajor> and C<devminor>.
-It is just a convenient wrapper around C<guestfs_mknod>.");
+It is just a convenient wrapper around C<guestfs_mknod>.
+
+The mode actually set is affected by the umask.");
("mknod_c", (RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"]), 136, [Optional "mknod"],
[InitBasicFS, Always, TestOutputStruct (
"\
This call creates a char device node called C<path> with
mode C<mode> and device major/minor C<devmajor> and C<devminor>.
-It is just a convenient wrapper around C<guestfs_mknod>.");
+It is just a convenient wrapper around C<guestfs_mknod>.
+
+The mode actually set is affected by the umask.");
("umask", (RInt "oldmask", [Int "mask"]), 137, [],
- [], (* XXX umask is one of those stateful things that we should
- * reset between each test.
- *)
+ [InitEmpty, Always, TestOutputInt (
+ [["umask"; "0o22"]], 0o22)],
"set file mode creation mask (umask)",
"\
This function sets the mask used for creating new files and
=item '?'
-The L<readdir(3)> returned a C<d_type> field with an
+The L<readdir(3)> call returned a C<d_type> field with an
unexpected value
=back
("read_file", (RBufferOut "content", [Pathname "path"]), 150, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputBuffer (
- [["read_file"; "/known-4"]], "abc\ndef\nghi")],
+ [["read_file"; "/known-4"]], "abc\ndef\nghi");
+ (* Test various near large, large and too large files (RHBZ#589039). *)
+ InitBasicFS, Always, TestLastFail (
+ [["touch"; "/a"];
+ ["truncate_size"; "/a"; "4194303"]; (* GUESTFS_MESSAGE_MAX - 1 *)
+ ["read_file"; "/a"]]);
+ InitBasicFS, Always, TestLastFail (
+ [["touch"; "/a"];
+ ["truncate_size"; "/a"; "4194304"]; (* GUESTFS_MESSAGE_MAX *)
+ ["read_file"; "/a"]]);
+ InitBasicFS, Always, TestLastFail (
+ [["touch"; "/a"];
+ ["truncate_size"; "/a"; "41943040"]; (* GUESTFS_MESSAGE_MAX * 10 *)
+ ["read_file"; "/a"]])],
"read a file",
"\
This calls returns the contents of the file C<path> as a
[InitEmpty, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs_b"; "ext2"; "4096"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["write_file"; "/new"; "new file contents"; "0"];
["cat"; "/new"]], "new file contents")],
"make a filesystem with block size",
[["sfdiskM"; "/dev/sda"; ",100 ,"];
["mke2journal"; "4096"; "/dev/sda1"];
["mke2fs_J"; "ext2"; "4096"; "/dev/sda2"; "/dev/sda1"];
- ["mount"; "/dev/sda2"; "/"];
+ ["mount_options"; ""; "/dev/sda2"; "/"];
["write_file"; "/new"; "new file contents"; "0"];
["cat"; "/new"]], "new file contents")],
"make ext2/3/4 external journal",
[["sfdiskM"; "/dev/sda"; ",100 ,"];
["mke2journal_L"; "4096"; "JOURNAL"; "/dev/sda1"];
["mke2fs_JL"; "ext2"; "4096"; "/dev/sda2"; "JOURNAL"];
- ["mount"; "/dev/sda2"; "/"];
+ ["mount_options"; ""; "/dev/sda2"; "/"];
["write_file"; "/new"; "new file contents"; "0"];
["cat"; "/new"]], "new file contents")],
"make ext2/3/4 external journal with label",
[["sfdiskM"; "/dev/sda"; ",100 ,"];
["mke2journal_U"; "4096"; uuid; "/dev/sda1"];
["mke2fs_JU"; "ext2"; "4096"; "/dev/sda2"; uuid];
- ["mount"; "/dev/sda2"; "/"];
+ ["mount_options"; ""; "/dev/sda2"; "/"];
["write_file"; "/new"; "new file contents"; "0"];
["cat"; "/new"]], "new file contents")]),
"make ext2/3/4 external journal with UUID",
)],
"echo arguments back to the client",
"\
-This command concatenate the list of C<words> passed with single spaces between
-them and returns the resulting string.
+This command concatenates the list of C<words> passed with single spaces
+between them and returns the resulting string.
You can use this command to test the connection through to the daemon.
[["vfs_type"; "/dev/sda1"]], "ext2")],
"get the Linux VFS type corresponding to a mounted device",
"\
-This command gets the block device type corresponding to
-a mounted device called C<device>.
+This command gets the filesystem type corresponding to
+the filesystem on C<device>.
-Usually the result is the name of the Linux VFS module that
-is used to mount this device (probably determined automatically
-if you used the C<guestfs_mount> call).");
+For most filesystems, the result is the name of the Linux
+VFS module which would be used to mount this filesystem
+if you mounted it without specifying the filesystem type.
+For example a string such as C<ext3> or C<ntfs>.");
("truncate", (RErr, [Pathname "path"]), 199, [],
[InitBasicFS, Always, TestOutputStruct (
"truncate a file to a particular size",
"\
This command truncates C<path> to size C<size> bytes. The file
-must exist already. If the file is smaller than C<size> then
-the file is extended to the required size with null bytes.");
+must exist already.
+
+If the current file size is less than C<size> then
+the file is extended to the required size with zero bytes.
+This creates a sparse file (ie. disk blocks are not allocated
+for the file until you write to it). To create a non-sparse
+file of zeroes, use C<guestfs_fallocate64> instead.");
("utimens", (RErr, [Pathname "path"; Int64 "atsecs"; Int64 "atnsecs"; Int64 "mtsecs"; Int64 "mtnsecs"]), 201, [],
[InitBasicFS, Always, TestOutputStruct (
"create a directory with a particular mode",
"\
This command creates a directory, setting the initial permissions
-of the directory to C<mode>. See also C<guestfs_mkdir>.");
+of the directory to C<mode>.
+
+For common Linux filesystems, the actual mode which is set will
+be C<mode & ~umask & 01777>. Non-native-Linux filesystems may
+interpret the mode in other ways.
+
+See also C<guestfs_mkdir>, C<guestfs_umask>");
("lchown", (RErr, [Int "owner"; Int "group"; Pathname "path"]), 203, [],
[], (* XXX *)
On return you get a list of strings, with a one-to-one
correspondence to the C<names> list. Each string is the
-value of the symbol link.
+value of the symbolic link.
If the C<readlink(2)> operation fails on any name, then
the corresponding result string is the empty string C<\"\">.
This sets the bootable flag on partition numbered C<partnum> on
device C<device>. Note that partitions are numbered from 1.
-The bootable flag is used by some PC BIOSes to determine which
-partition to boot from. It is by no means universally recognized,
-and in any case if your operating system installed a boot
-sector on the device itself, then that takes precedence.");
+The bootable flag is used by some operating systems (notably
+Windows) to determine which partition to boot from. It is by
+no means universally recognized.");
("part_set_name", (RErr, [Device "device"; Int "partnum"; String "name"]), 212, [],
[InitEmpty, Always, TestRun (
If the destination is a device, it must be as large or larger
than the source file or device, otherwise the copy will fail.
-This command cannot do partial copies.");
+This command cannot do partial copies (see C<guestfs_copy_size>).");
("filesize", (RInt64 "size", [Pathname "file"]), 218, [],
[InitBasicFS, Always, TestOutputInt (
C<guestfs_is_dir>, C<guestfs_is_file> etc.
To get the size of block devices, use C<guestfs_blockdev_getsize64>.");
+ ("lvrename", (RErr, [String "logvol"; String "newlogvol"]), 219, [],
+ [InitBasicFSonLVM, Always, TestOutputList (
+ [["lvrename"; "/dev/VG/LV"; "/dev/VG/LV2"];
+ ["lvs"]], ["/dev/VG/LV2"])],
+ "rename an LVM logical volume",
+ "\
+Rename a logical volume C<logvol> with the new name C<newlogvol>.");
+
+ ("vgrename", (RErr, [String "volgroup"; String "newvolgroup"]), 220, [],
+ [InitBasicFSonLVM, Always, TestOutputList (
+ [["umount"; "/"];
+ ["vg_activate"; "false"; "VG"];
+ ["vgrename"; "VG"; "VG2"];
+ ["vg_activate"; "true"; "VG2"];
+ ["mount_options"; ""; "/dev/VG2/LV"; "/"];
+ ["vgs"]], ["VG2"])],
+ "rename an LVM volume group",
+ "\
+Rename a volume group C<volgroup> with the new name C<newvolgroup>.");
+
+ ("initrd_cat", (RBufferOut "content", [Pathname "initrdpath"; String "filename"]), 221, [ProtocolLimitWarning],
+ [InitISOFS, Always, TestOutputBuffer (
+ [["initrd_cat"; "/initrd"; "known-4"]], "abc\ndef\nghi")],
+ "list the contents of a single file in an initrd",
+ "\
+This command unpacks the file C<filename> from the initrd file
+called C<initrdpath>. The filename must be given I<without> the
+initial C</> character.
+
+For example, in guestfish you could use the following command
+to examine the boot script (usually called C</init>)
+contained in a Linux initrd or initramfs image:
+
+ initrd-cat /boot/initrd-<version>.img init
+
+See also C<guestfs_initrd_list>.");
+
+ ("pvuuid", (RString "uuid", [Device "device"]), 222, [],
+ [],
+ "get the UUID of a physical volume",
+ "\
+This command returns the UUID of the LVM PV C<device>.");
+
+ ("vguuid", (RString "uuid", [String "vgname"]), 223, [],
+ [],
+ "get the UUID of a volume group",
+ "\
+This command returns the UUID of the LVM VG named C<vgname>.");
+
+ ("lvuuid", (RString "uuid", [Device "device"]), 224, [],
+ [],
+ "get the UUID of a logical volume",
+ "\
+This command returns the UUID of the LVM LV C<device>.");
+
+ ("vgpvuuids", (RStringList "uuids", [String "vgname"]), 225, [],
+ [],
+ "get the PV UUIDs containing the volume group",
+ "\
+Given a VG called C<vgname>, this returns the UUIDs of all
+the physical volumes that this volume group resides on.
+
+You can use this along with C<guestfs_pvs> and C<guestfs_pvuuid>
+calls to associate physical volumes and volume groups.
+
+See also C<guestfs_vglvuuids>.");
+
+ ("vglvuuids", (RStringList "uuids", [String "vgname"]), 226, [],
+ [],
+ "get the LV UUIDs of all LVs in the volume group",
+ "\
+Given a VG called C<vgname>, this returns the UUIDs of all
+the logical volumes created in this volume group.
+
+You can use this along with C<guestfs_lvs> and C<guestfs_lvuuid>
+calls to associate logical volumes and volume groups.
+
+See also C<guestfs_vgpvuuids>.");
+
+ ("copy_size", (RErr, [Dev_or_Path "src"; Dev_or_Path "dest"; Int64 "size"]), 227, [],
+ [InitBasicFS, Always, TestOutputBuffer (
+ [["write_file"; "/src"; "hello, world"; "0"];
+ ["copy_size"; "/src"; "/dest"; "5"];
+ ["read_file"; "/dest"]], "hello")],
+ "copy size bytes from source to destination using dd",
+ "\
+This command copies exactly C<size> bytes from one source device
+or file C<src> to another destination device or file C<dest>.
+
+Note this will fail if the source is too short or if the destination
+is not large enough.");
+
+ ("part_del", (RErr, [Device "device"; Int "partnum"]), 233, [],
+ [InitEmpty, Always, TestRun (
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "primary"; "1"; "-1"];
+ ["part_del"; "/dev/sda"; "1"]])],
+ "delete a partition",
+ "\
+This command deletes the partition numbered C<partnum> on C<device>.
+
+Note that in the case of MBR partitioning, deleting an
+extended partition also deletes any logical partitions
+it contains.");
+
+ ("part_get_bootable", (RBool "bootable", [Device "device"; Int "partnum"]), 234, [],
+ [InitEmpty, Always, TestOutputTrue (
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "primary"; "1"; "-1"];
+ ["part_set_bootable"; "/dev/sda"; "1"; "true"];
+ ["part_get_bootable"; "/dev/sda"; "1"]])],
+ "return true if a partition is bootable",
+ "\
+This command returns true if the partition C<partnum> on
+C<device> has the bootable flag set.
+
+See also C<guestfs_part_set_bootable>.");
+
+ ("part_get_mbr_id", (RInt "idbyte", [Device "device"; Int "partnum"]), 235, [],
+ [InitEmpty, Always, TestOutputInt (
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "primary"; "1"; "-1"];
+ ["part_set_mbr_id"; "/dev/sda"; "1"; "0x7f"];
+ ["part_get_mbr_id"; "/dev/sda"; "1"]], 0x7f)],
+ "get the MBR type byte (ID byte) from a partition",
+ "\
+Returns the MBR type byte (also known as the ID byte) from
+the numbered partition C<partnum>.
+
+Note that only MBR (old DOS-style) partitions have type bytes.
+You will get undefined results for other partition table
+types (see C<guestfs_part_get_parttype>).");
+
+ ("part_set_mbr_id", (RErr, [Device "device"; Int "partnum"; Int "idbyte"]), 236, [],
+ [], (* tested by part_get_mbr_id *)
+ "set the MBR type byte (ID byte) of a partition",
+ "\
+Sets the MBR type byte (also known as the ID byte) of
+the numbered partition C<partnum> to C<idbyte>. Note
+that the type bytes quoted in most documentation are
+in fact hexadecimal numbers, but usually documented
+without any leading \"0x\" which might be confusing.
+
+Note that only MBR (old DOS-style) partitions have type bytes.
+You will get undefined results for other partition table
+types (see C<guestfs_part_get_parttype>).");
+
]
let all_functions = non_daemon_functions @ daemon_functions
(* Handling for function flags. *)
let protocol_limit_warning =
"Because of the message protocol, there is a transfer limit
-of somewhere between 2MB and 4MB. To transfer large files you should use
-FTP."
+of somewhere between 2MB and 4MB. See L<guestfs(3)/PROTOCOL LIMITS>."
let danger_will_robinson =
"B<This command is dangerous. Without careful use you
"for"; "forall"; "foreign"; "fun"; "function"; "functor"; "goto";
"hiding"; "if"; "import"; "in"; "include"; "infix"; "infixl";
"infixr"; "inherit"; "initializer"; "inline"; "instance"; "int";
+ "interface";
"land"; "lazy"; "let"; "long"; "lor"; "lsl"; "lsr"; "lxor";
"match"; "mdo"; "method"; "mod"; "module"; "mutable"; "new";
"newtype"; "object"; "of"; "open"; "or"; "private"; "qualified";
failwithf "short description of %s should not end with . or \\n." name
) all_functions;
- (* Check long dscriptions. *)
+ (* Check long descriptions. *)
List.iter (
fun (name, _, _, _, _, _, longdesc) ->
if longdesc.[String.length longdesc-1] = '\n' then
let name = "guestfs_" ^ shortname in
pr "=head2 %s\n\n" name;
pr " ";
- generate_prototype ~extern:false ~handle:"handle" name style;
+ generate_prototype ~extern:false ~handle:"g" name style;
pr "\n\n";
pr "%s\n\n" longdesc;
(match fst style with
(* Having to choose a maximum message size is annoying for several
* reasons (it limits what we can do in the API), but it (a) makes
* the protocol a lot simpler, and (b) provides a bound on the size
- * of the daemon which operates in limited memory space. For large
- * file transfers you should use FTP.
+ * of the daemon which operates in limited memory space.
*)
pr "const GUESTFS_MESSAGE_MAX = %d;\n" (4 * 1024 * 1024);
pr "\n";
List.iter (
fun (shortname, style, _, _, _, _, _) ->
let name = "guestfs_" ^ shortname in
- generate_prototype ~single_line:true ~newline:true ~handle:"handle"
+ generate_prototype ~single_line:true ~newline:true ~handle:"g"
name style
) all_functions
List.iter (
fun (shortname, style, _, _, _, _, _) ->
let name = "guestfs__" ^ shortname in
- generate_prototype ~single_line:true ~newline:true ~handle:"handle"
+ generate_prototype ~single_line:true ~newline:true ~handle:"g"
name style
) non_daemon_functions
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
+#include <string.h>
#include <inttypes.h>
#include \"guestfs.h\"
*)
"guestfs_safe_calloc";
"guestfs_safe_malloc";
+ "guestfs_safe_strdup";
+ "guestfs_safe_memdup";
] in
let functions =
List.map (fun (name, _, _, _, _, _, _) -> "guestfs_" ^ name)
pr " memset (&args, 0, sizeof args);\n";
pr "\n";
pr " if (!xdr_guestfs_%s_args (xdr_in, &args)) {\n" name;
- pr " reply_with_error (\"%%s: daemon failed to decode procedure arguments\", \"%s\");\n" name;
+ pr " reply_with_error (\"daemon failed to decode procedure arguments\");\n";
pr " return;\n";
pr " }\n";
let pr_args n =
| DeviceList n ->
pr_list_handling_code n;
pr " /* Ensure that each is a device,\n";
- pr " * and perform device name translation. */\n";
- pr " { int pvi; for (pvi = 0; physvols[pvi] != NULL; ++pvi)\n";
- pr " RESOLVE_DEVICE (physvols[pvi], goto done);\n";
+ pr " * and perform device name translation.\n";
+ pr " */\n";
+ pr " {\n";
+ pr " int i;\n";
+ pr " for (i = 0; %s[i] != NULL; ++i)\n" n;
+ pr " RESOLVE_DEVICE (%s[i], goto done);\n" n;
pr " }\n";
| Bool n -> pr " %s = args.%s;\n" n n
| Int n -> pr " %s = args.%s;\n" n n
pr " ret->guestfs_int_lvm_%s_list_val = NULL;\n" typ;
pr "\n";
pr " r = command (&out, &err,\n";
- pr " \"/sbin/lvm\", \"%ss\",\n" typ;
+ pr " \"lvm\", \"%ss\",\n" typ;
pr " \"-o\", lvm_%s_cols, \"--unbuffered\", \"--noheadings\",\n" typ;
pr " \"--nosuffix\", \"--separator\", \",\", \"--units\", \"b\", NULL);\n";
pr " if (r == -1) {\n";
}
*/
+static int
+is_available (const char *group)
+{
+ const char *groups[] = { group, NULL };
+ int r;
+
+ suppress_error = 1;
+ r = guestfs_available (g, (char **) groups);
+ suppress_error = 0;
+
+ return r == 0;
+}
+
";
(* Generate a list of commands which are not tested anywhere. *)
fun (_, _, _, _, tests, _, _) ->
let tests = filter_map (
function
- | (_, (Always|If _|Unless _), test) -> Some test
+ | (_, (Always|If _|Unless _|IfAvailable _), test) -> Some test
| (_, Disabled, _) -> None
) tests in
let seq = List.concat (List.map seq_of_test tests) in
exit (EXIT_FAILURE);
}
+ /* Set a timeout in case qemu hangs during launch (RHBZ#505329). */
+ alarm (600);
+
if (guestfs_launch (g) == -1) {
printf (\"guestfs_launch FAILED\\n\");
exit (EXIT_FAILURE);
}
- /* Set a timeout in case qemu hangs during launch (RHBZ#505329). */
- alarm (600);
-
/* Cancel previous alarm. */
alarm (0);
iteri (
fun i test_name ->
pr " test_num++;\n";
+ pr " if (guestfs_get_verbose (g))\n";
+ pr " printf (\"-------------------------------------------------------------------------------\\n\");\n";
pr " printf (\"%%3d/%%3d %s\\n\", test_num, nr_tests);\n" test_name;
pr " if (%s () == -1) {\n" test_name;
pr " printf (\"%s FAILED\\n\");\n" test_name;
" test_name name (String.uppercase test_name) (String.uppercase name);
(match prereq with
- | Disabled | Always -> ()
+ | Disabled | Always | IfAvailable _ -> ()
| If code | Unless code ->
pr "static int %s_prereq (void)\n" test_name;
pr "{\n";
List.iter (
function
| Optional group ->
- pr " {\n";
- pr " const char *groups[] = { \"%s\", NULL };\n" group;
- pr " int r;\n";
- pr " suppress_error = 1;\n";
- pr " r = guestfs_available (g, (char **) groups);\n";
- pr " suppress_error = 0;\n";
- pr " if (r == -1) {\n";
- pr " printf (\" %%s skipped (reason: group %%s not available in daemon)\\n\", \"%s\", groups[0]);\n" test_name;
- pr " return 0;\n";
- pr " }\n";
+ pr " if (!is_available (\"%s\")) {\n" group;
+ pr " printf (\" %%s skipped (reason: group %%s not available in daemon)\\n\", \"%s\", \"%s\");\n" test_name group;
+ pr " return 0;\n";
pr " }\n";
| _ -> ()
) flags;
pr " }\n";
pr "\n";
generate_one_test_body name i test_name init test;
+ | IfAvailable group ->
+ pr " if (!is_available (\"%s\")) {\n" group;
+ pr " printf (\" %%s skipped (reason: %%s not available)\\n\", \"%s\", \"%s\");\n" test_name group;
+ pr " return 0;\n";
+ pr " }\n";
+ pr "\n";
+ generate_one_test_body name i test_name init test;
| Always ->
generate_one_test_body name i test_name init test
);
["lvm_remove_all"];
["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"]]
+ ["mount_options"; ""; "/dev/sda1"; "/"]]
| InitBasicFSonLVM ->
pr " /* InitBasicFSonLVM for %s: create ext2 on /dev/VG/LV */\n"
test_name;
["vgcreate"; "VG"; "/dev/sda1"];
["lvcreate"; "LV"; "VG"; "8"];
["mkfs"; "ext2"; "/dev/VG/LV"];
- ["mount"; "/dev/VG/LV"; "/"]]
+ ["mount_options"; ""; "/dev/VG/LV"; "/"]]
| InitISOFS ->
pr " /* InitISOFS for %s */\n" test_name;
List.iter (generate_test_command_call test_name)
| Bool _, _
| FileIn _, _ | FileOut _, _ -> ()
| StringList n, "" | DeviceList n, "" ->
- pr " const char *const %s[1] = { NULL };\n" n
+ pr " const char *const %s[1] = { NULL };\n" n
| StringList n, arg | DeviceList n, arg ->
let strs = string_split " " arg in
iteri (
pr "\n";
(* display_command function, which implements guestfish -h cmd *)
- pr "void display_command (const char *cmd)\n";
+ pr "int display_command (const char *cmd)\n";
pr "{\n";
List.iter (
fun (name, style, _, flags, _, shortdesc, longdesc) ->
pr " || STRCASEEQ (cmd, \"%s\")" name2;
if name <> alias then
pr " || STRCASEEQ (cmd, \"%s\")" alias;
- pr ")\n";
+ pr ") {\n";
pr " pod2text (\"%s\", _(\"%s\"), %S);\n"
name2 shortdesc
("=head1 SYNOPSIS\n\n " ^ synopsis ^ "\n\n" ^
"=head1 DESCRIPTION\n\n" ^
longdesc ^ warnings ^ describe_alias);
+ pr " return 0;\n";
+ pr " }\n";
pr " else\n"
) all_functions;
- pr " display_builtin_command (cmd);\n";
+ pr " return display_builtin_command (cmd);\n";
pr "}\n";
pr "\n";
and comment =
"The Int type in the generator is a signed 31 bit int." in
Some (min, max, comment) in
- parse_integer "xstrtol" "long" "int" range name i
+ parse_integer "xstrtoll" "long long" "int" range name i
| Int64 name ->
parse_integer "xstrtoll" "long long" "int64_t" None name i
) (snd style);
) all_functions;
pr " {\n";
pr " fprintf (stderr, _(\"%%s: unknown command\\n\"), cmd);\n";
+ pr " if (command_num == 1)\n";
+ pr " extended_help_message ();\n";
pr " return -1;\n";
pr " }\n";
pr " return 0;\n";
#endif /* HAVE_LIBREADLINE */
-char **do_completion (const char *text, int start, int end)
+#ifdef HAVE_RL_COMPLETION_MATCHES
+#define RL_COMPLETION_MATCHES rl_completion_matches
+#else
+#ifdef HAVE_COMPLETION_MATCHES
+#define RL_COMPLETION_MATCHES completion_matches
+#endif
+#endif /* else just fail if we don't have either symbol */
+
+char **
+do_completion (const char *text, int start, int end)
{
char **matches = NULL;
rl_completion_append_character = ' ';
if (start == 0)
- matches = rl_completion_matches (text, generator);
+ matches = RL_COMPLETION_MATCHES (text, generator);
else if (complete_dest_paths)
- matches = rl_completion_matches (text, complete_dest_paths_generator);
+ matches = RL_COMPLETION_MATCHES (text, complete_dest_paths_generator);
#endif
return matches;
#include <caml/mlvalues.h>
#include <caml/signals.h>
-#include <guestfs.h>
+#include \"guestfs.h\"
#include \"guestfs_c.h\"
| String n
| FileIn n
| FileOut n ->
- pr " const char *%s = String_val (%sv);\n" n n
+ (* Copy strings in case the GC moves them: RHBZ#604691 *)
+ pr " char *%s = guestfs_safe_strdup (g, String_val (%sv));\n" n n
| OptString n ->
- pr " const char *%s =\n" n;
- pr " %sv != Val_int (0) ? String_val (Field (%sv, 0)) : NULL;\n"
- n n
+ pr " char *%s =\n" n;
+ pr " %sv != Val_int (0) ?" n;
+ pr " guestfs_safe_strdup (g, String_val (Field (%sv, 0))) : NULL;\n" n
| StringList n | DeviceList n ->
pr " char **%s = ocaml_guestfs_strings_val (g, %sv);\n" n n
| Bool n ->
pr ";\n";
pr " caml_leave_blocking_section ();\n";
+ (* Free strings if we copied them above. *)
List.iter (
function
+ | Pathname n | Device n | Dev_or_Path n | String n | OptString n
+ | FileIn n | FileOut n ->
+ pr " free (%s);\n" n
| StringList n | DeviceList n ->
pr " ocaml_guestfs_free_strings (%s);\n" n;
- | Pathname _ | Device _ | Dev_or_Path _ | String _ | OptString _
- | Bool _ | Int _ | Int64 _
- | FileIn _ | FileOut _ -> ()
+ | Bool _ | Int _ | Int64 _ -> ()
) (snd style);
pr " if (r == %s)\n" error_code;
pr ";\n";
do_cleanups ();
pr " if (r == -1)\n";
- pr " croak (\"%s: %%s\", guestfs_last_error (g));\n" name;
+ pr " croak (\"%%s\", guestfs_last_error (g));\n";
| RInt n
| RBool n ->
pr "PREINIT:\n";
pr ";\n";
do_cleanups ();
pr " if (%s == -1)\n" n;
- pr " croak (\"%s: %%s\", guestfs_last_error (g));\n" name;
+ pr " croak (\"%%s\", guestfs_last_error (g));\n";
pr " RETVAL = newSViv (%s);\n" n;
pr " OUTPUT:\n";
pr " RETVAL\n"
pr ";\n";
do_cleanups ();
pr " if (%s == -1)\n" n;
- pr " croak (\"%s: %%s\", guestfs_last_error (g));\n" name;
+ pr " croak (\"%%s\", guestfs_last_error (g));\n";
pr " RETVAL = my_newSVll (%s);\n" n;
pr " OUTPUT:\n";
pr " RETVAL\n"
pr ";\n";
do_cleanups ();
pr " if (%s == NULL)\n" n;
- pr " croak (\"%s: %%s\", guestfs_last_error (g));\n" name;
+ pr " croak (\"%%s\", guestfs_last_error (g));\n";
pr " RETVAL = newSVpv (%s, 0);\n" n;
pr " OUTPUT:\n";
pr " RETVAL\n"
pr ";\n";
do_cleanups ();
pr " if (%s == NULL)\n" n;
- pr " croak (\"%s: %%s\", guestfs_last_error (g));\n" name;
+ pr " croak (\"%%s\", guestfs_last_error (g));\n";
pr " RETVAL = newSVpv (%s, 0);\n" n;
pr " free (%s);\n" n;
pr " OUTPUT:\n";
pr ";\n";
do_cleanups ();
pr " if (%s == NULL)\n" n;
- pr " croak (\"%s: %%s\", guestfs_last_error (g));\n" name;
+ pr " croak (\"%%s\", guestfs_last_error (g));\n";
pr " for (n = 0; %s[n] != NULL; ++n) /**/;\n" n;
pr " EXTEND (SP, n);\n";
pr " for (i = 0; i < n; ++i) {\n";
pr ";\n";
do_cleanups ();
pr " if (%s == NULL)\n" n;
- pr " croak (\"%s: %%s\", guestfs_last_error (g));\n" name;
- pr " RETVAL = newSVpv (%s, size);\n" n;
+ pr " croak (\"%%s\", guestfs_last_error (g));\n";
+ pr " RETVAL = newSVpvn (%s, size);\n" n;
pr " free (%s);\n" n;
pr " OUTPUT:\n";
pr " RETVAL\n"
pr ";\n";
do_cleanups ();
pr " if (%s == NULL)\n" n;
- pr " croak (\"%s: %%s\", guestfs_last_error (g));\n" name;
+ pr " croak (\"%%s\", guestfs_last_error (g));\n";
pr " EXTEND (SP, %s->len);\n" n;
pr " for (i = 0; i < %s->len; ++i) {\n" n;
pr " hv = newHV ();\n";
pr " (void) hv_store (hv, \"%s\", %d, newSVpv (%s->val[i].%s, 32), 0);\n"
name (String.length name) n name
| name, FBuffer ->
- pr " (void) hv_store (hv, \"%s\", %d, newSVpv (%s->val[i].%s, %s->val[i].%s_len), 0);\n"
+ pr " (void) hv_store (hv, \"%s\", %d, newSVpvn (%s->val[i].%s, %s->val[i].%s_len), 0);\n"
name (String.length name) n name n name
| name, (FBytes|FUInt64) ->
pr " (void) hv_store (hv, \"%s\", %d, my_newSVull (%s->val[i].%s), 0);\n"
pr ";\n";
do_cleanups ();
pr " if (%s == NULL)\n" n;
- pr " croak (\"%s: %%s\", guestfs_last_error (g));\n" name;
+ pr " croak (\"%%s\", guestfs_last_error (g));\n";
pr " EXTEND (SP, 2 * %d);\n" (List.length cols);
List.iter (
fun ((name, _) as col) ->
pr " PUSHs (sv_2mortal (newSVpv (%s->%s, 0)));\n"
n name
| name, FBuffer ->
- pr " PUSHs (sv_2mortal (newSVpv (%s->%s, %s->%s_len)));\n"
+ pr " PUSHs (sv_2mortal (newSVpvn (%s->%s, %s->%s_len)));\n"
n name n name
| name, FUUID ->
pr " PUSHs (sv_2mortal (newSVpv (%s->%s, 32)));\n"
Libguestfs provides ways to enumerate guest storage (eg. partitions,
LVs, what filesystem is in each LV, etc.). It can also run commands
-in the context of the guest. Also you can access filesystems over FTP.
+in the context of the guest. Also you can access filesystems over
+FUSE.
See also L<Sys::Guestfs::Lib(3)> for a set of useful library
functions for using libguestfs from Perl, including integration
Libguestfs provides ways to enumerate guest storage (eg. partitions,
LVs, what filesystem is in each LV, etc.). It can also run commands
-in the context of the guest. Also you can access filesystems over FTP.
+in the context of the guest. Also you can access filesystems over
+FUSE.
Errors which happen while using the API are turned into Python
RuntimeError exceptions.
List.iter (
fun (name, style, _, _, _, shortdesc, _) ->
let rec csharp_return_type () =
- match fst style with
- | RErr -> "void"
- | RBool n -> "bool"
- | RInt n -> "int"
- | RInt64 n -> "long"
- | RConstString n
- | RConstOptString n
- | RString n
- | RBufferOut n -> "string"
- | RStruct (_,n) -> "_" ^ n
- | RHashtable n -> "Hashtable"
- | RStringList n -> "string[]"
- | RStructList (_,n) -> sprintf "_%s[]" n
+ match fst style with
+ | RErr -> "void"
+ | RBool n -> "bool"
+ | RInt n -> "int"
+ | RInt64 n -> "long"
+ | RConstString n
+ | RConstOptString n
+ | RString n
+ | RBufferOut n -> "string"
+ | RStruct (_,n) -> "_" ^ n
+ | RHashtable n -> "Hashtable"
+ | RStringList n -> "string[]"
+ | RStructList (_,n) -> sprintf "_%s[]" n
and c_return_type () =
- match fst style with
- | RErr
- | RBool _
- | RInt _ -> "int"
- | RInt64 _ -> "long"
- | RConstString _
- | RConstOptString _
- | RString _
- | RBufferOut _ -> "string"
- | RStruct (_,n) -> "_" ^ n
- | RHashtable _
- | RStringList _ -> "string[]"
- | RStructList (_,n) -> sprintf "_%s[]" n
-
+ match fst style with
+ | RErr
+ | RBool _
+ | RInt _ -> "int"
+ | RInt64 _ -> "long"
+ | RConstString _
+ | RConstOptString _
+ | RString _
+ | RBufferOut _ -> "string"
+ | RStruct (_,n) -> "_" ^ n
+ | RHashtable _
+ | RStringList _ -> "string[]"
+ | RStructList (_,n) -> sprintf "_%s[]" n
+
and c_error_comparison () =
- match fst style with
- | RErr
- | RBool _
- | RInt _
- | RInt64 _ -> "== -1"
- | RConstString _
- | RConstOptString _
- | RString _
- | RBufferOut _
- | RStruct (_,_)
- | RHashtable _
- | RStringList _
- | RStructList (_,_) -> "== null"
-
+ match fst style with
+ | RErr
+ | RBool _
+ | RInt _
+ | RInt64 _ -> "== -1"
+ | RConstString _
+ | RConstOptString _
+ | RString _
+ | RBufferOut _
+ | RStruct (_,_)
+ | RHashtable _
+ | RStringList _
+ | RStructList (_,_) -> "== null"
+
and generate_extern_prototype () =
- pr " static extern %s guestfs_%s (IntPtr h"
- (c_return_type ()) name;
- List.iter (
- function
- | Pathname n | Device n | Dev_or_Path n | String n | OptString n
- | FileIn n | FileOut n ->
+ pr " static extern %s guestfs_%s (IntPtr h"
+ (c_return_type ()) name;
+ List.iter (
+ function
+ | Pathname n | Device n | Dev_or_Path n | String n | OptString n
+ | FileIn n | FileOut n ->
pr ", [In] string %s" n
- | StringList n | DeviceList n ->
+ | StringList n | DeviceList n ->
pr ", [In] string[] %s" n
- | Bool n ->
- pr ", bool %s" n
- | Int n ->
- pr ", int %s" n
- | Int64 n ->
- pr ", long %s" n
- ) (snd style);
- pr ");\n"
+ | Bool n ->
+ pr ", bool %s" n
+ | Int n ->
+ pr ", int %s" n
+ | Int64 n ->
+ pr ", long %s" n
+ ) (snd style);
+ pr ");\n"
and generate_public_prototype () =
- pr " public %s %s (" (csharp_return_type ()) name;
- let comma = ref false in
- let next () =
- if !comma then pr ", ";
- comma := true
- in
- List.iter (
- function
- | Pathname n | Device n | Dev_or_Path n | String n | OptString n
- | FileIn n | FileOut n ->
+ pr " public %s %s (" (csharp_return_type ()) name;
+ let comma = ref false in
+ let next () =
+ if !comma then pr ", ";
+ comma := true
+ in
+ List.iter (
+ function
+ | Pathname n | Device n | Dev_or_Path n | String n | OptString n
+ | FileIn n | FileOut n ->
next (); pr "string %s" n
- | StringList n | DeviceList n ->
+ | StringList n | DeviceList n ->
next (); pr "string[] %s" n
- | Bool n ->
- next (); pr "bool %s" n
- | Int n ->
- next (); pr "int %s" n
- | Int64 n ->
- next (); pr "long %s" n
- ) (snd style);
- pr ")\n"
+ | Bool n ->
+ next (); pr "bool %s" n
+ | Int n ->
+ next (); pr "int %s" n
+ | Int64 n ->
+ next (); pr "long %s" n
+ ) (snd style);
+ pr ")\n"
and generate_call () =
- pr "guestfs_%s (_handle" name;
- List.iter (fun arg -> pr ", %s" (name_of_argt arg)) (snd style);
- pr ");\n";
+ pr "guestfs_%s (_handle" name;
+ List.iter (fun arg -> pr ", %s" (name_of_argt arg)) (snd style);
+ pr ");\n";
in
pr " [DllImport (\"%s\")]\n" library;
pr " r = ";
generate_call ();
pr " if (r %s)\n" (c_error_comparison ());
- pr " throw new Error (\"%s: \" + guestfs_last_error (_handle));\n"
- name;
+ pr " throw new Error (guestfs_last_error (_handle));\n";
(match fst style with
| RErr -> ()
| RBool _ ->
git.annexia.org / libguestfs.git / blobdiff