+ ("ntfs_3g_probe", (RInt "status", [Bool "rw"; String "device"]), 110, [],
+ [InitNone, Always, TestOutputInt (
+ [["sfdisk"; "/dev/sda"; "0"; "0"; "0"; ","];
+ ["mkfs"; "ntfs"; "/dev/sda1"];
+ ["ntfs_3g_probe"; "true"; "/dev/sda1"]], 0);
+ InitNone, Always, TestOutputInt (
+ [["sfdisk"; "/dev/sda"; "0"; "0"; "0"; ","];
+ ["mkfs"; "ext2"; "/dev/sda1"];
+ ["ntfs_3g_probe"; "true"; "/dev/sda1"]], 12)],
+ "probe NTFS volume",
+ "\
+This command runs the L<ntfs-3g.probe(8)> command which probes
+an NTFS C<device> for mountability. (Not all NTFS volumes can
+be mounted read-write, and some cannot be mounted at all).
+
+C<rw> is a boolean flag. Set it to true if you want to test
+if the volume can be mounted read-write. Set it to false if
+you want to test if the volume can be mounted read-only.
+
+The return value is an integer which C<0> if the operation
+would succeed, or some non-zero value documented in the
+L<ntfs-3g.probe(8)> manual page.");
+
+ ("sh", (RString "output", [String "command"]), 111, [],
+ [], (* XXX needs tests *)
+ "run a command via the shell",
+ "\
+This call runs a command from the guest filesystem via the
+guest's C</bin/sh>.
+
+This is like C<guestfs_command>, but passes the command to:
+
+ /bin/sh -c \"command\"
+
+Depending on the guest's shell, this usually results in
+wildcards being expanded, shell expressions being interpolated
+and so on.
+
+All the provisos about C<guestfs_command> apply to this call.");
+
+ ("sh_lines", (RStringList "lines", [String "command"]), 112, [],
+ [], (* XXX needs tests *)
+ "run a command via the shell returning lines",
+ "\
+This is the same as C<guestfs_sh>, but splits the result
+into a list of lines.
+
+See also: C<guestfs_command_lines>");
+
+ ("glob_expand", (RStringList "paths", [String "pattern"]), 113, [],
+ [InitBasicFS, Always, TestOutputList (
+ [["mkdir_p"; "/a/b/c"];
+ ["touch"; "/a/b/c/d"];
+ ["touch"; "/a/b/c/e"];
+ ["glob_expand"; "/a/b/c/*"]], ["/a/b/c/d"; "/a/b/c/e"]);
+ InitBasicFS, Always, TestOutputList (
+ [["mkdir_p"; "/a/b/c"];
+ ["touch"; "/a/b/c/d"];
+ ["touch"; "/a/b/c/e"];
+ ["glob_expand"; "/a/*/c/*"]], ["/a/b/c/d"; "/a/b/c/e"]);
+ InitBasicFS, Always, TestOutputList (
+ [["mkdir_p"; "/a/b/c"];
+ ["touch"; "/a/b/c/d"];
+ ["touch"; "/a/b/c/e"];
+ ["glob_expand"; "/a/*/x/*"]], [])],
+ "expand a wildcard path",
+ "\
+This command searches for all the pathnames matching
+C<pattern> according to the wildcard expansion rules
+used by the shell.
+
+If no paths match, then this returns an empty list
+(note: not an error).
+
+It is just a wrapper around the C L<glob(3)> function
+with flags C<GLOB_MARK|GLOB_BRACE>.
+See that manual page for more details.");
+
+ ("scrub_device", (RErr, [String "device"]), 114, [DangerWillRobinson],
+ [InitNone, Always, TestRun ( (* use /dev/sdc because it's smaller *)
+ [["scrub_device"; "/dev/sdc"]])],
+ "scrub (securely wipe) a device",
+ "\
+This command writes patterns over C<device> to make data retrieval
+more difficult.
+
+It is an interface to the L<scrub(1)> program. See that
+manual page for more details.");
+
+ ("scrub_file", (RErr, [String "file"]), 115, [],
+ [InitBasicFS, Always, TestRun (
+ [["write_file"; "/file"; "content"; "0"];
+ ["scrub_file"; "/file"]])],
+ "scrub (securely wipe) a file",
+ "\
+This command writes patterns over a file to make data retrieval
+more difficult.
+
+The file is I<removed> after scrubbing.
+
+It is an interface to the L<scrub(1)> program. See that
+manual page for more details.");
+
+ ("scrub_freespace", (RErr, [String "dir"]), 116, [],
+ [], (* XXX needs testing *)
+ "scrub (securely wipe) free space",
+ "\
+This command creates the directory C<dir> and then fills it
+with files until the filesystem is full, and scrubs the files
+as for C<guestfs_scrub_file>, and deletes them.
+The intention is to scrub any free space on the partition
+containing C<dir>.
+
+It is an interface to the L<scrub(1)> program. See that
+manual page for more details.");
+
+ ("mkdtemp", (RString "dir", [String "template"]), 117, [],
+ [InitBasicFS, Always, TestRun (
+ [["mkdir"; "/tmp"];
+ ["mkdtemp"; "/tmp/tmpXXXXXX"]])],
+ "create a temporary directory",
+ "\
+This command creates a temporary directory. The
+C<template> parameter should be a full pathname for the
+temporary directory name with the final six characters being
+\"XXXXXX\".
+
+For example: \"/tmp/myprogXXXXXX\" or \"/Temp/myprogXXXXXX\",
+the second one being suitable for Windows filesystems.
+
+The name of the temporary directory that was created
+is returned.
+
+The temporary directory is created with mode 0700
+and is owned by root.
+
+The caller is responsible for deleting the temporary
+directory and its contents after use.
+
+See also: L<mkdtemp(3)>");
+
git.annexia.org / libguestfs.git / blobdiff