-#~ "glob - expand wildcards in command\n"
-#~ " glob <command> [<args> ...]\n"
-#~ "\n"
-#~ " Glob runs <command> with wildcards expanded in any\n"
-#~ " command args. Note that the command is run repeatedly\n"
-#~ " once for each expanded argument.\n"
-#~ msgstr ""
-#~ "glob - expand wildcards in command\n"
-#~ " glob <command> [<args> ...]\n"
-#~ "\n"
-#~ " Glob runs <command> with wildcards expanded in any\n"
-#~ " command args. Note that the command is run repeatedly\n"
-#~ " once for each expanded argument.\n"
-
-#~ msgid ""
-#~ "more - view a file in the pager\n"
-#~ " more <filename>\n"
-#~ "\n"
-#~ " This is used to view a file in the pager.\n"
-#~ "\n"
-#~ " It is the equivalent of (and is implemented by)\n"
-#~ " running \"cat\" and using the pager.\n"
-#~ "\n"
-#~ " Normally it uses $PAGER, but if you use the alias\n"
-#~ " \"less\" then it always uses \"less\".\n"
-#~ "\n"
-#~ " NOTE: This will not work reliably for large files\n"
-#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
-#~ msgstr ""
-#~ "more - view a file in the pager\n"
-#~ " more <filename>\n"
-#~ "\n"
-#~ " This is used to view a file in the pager.\n"
-#~ "\n"
-#~ " It is the equivalent of (and is implemented by)\n"
-#~ " running \"cat\" and using the pager.\n"
-#~ "\n"
-#~ " Normally it uses $PAGER, but if you use the alias\n"
-#~ " \"less\" then it always uses \"less\".\n"
-#~ "\n"
-#~ " NOTE: This will not work reliably for large files\n"
-#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
-
-#~ msgid ""
-#~ "reopen - close and reopen the libguestfs handle\n"
-#~ " reopen\n"
-#~ "\n"
-#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
-#~ "this normally, because the handle is closed properly when guestfish\n"
-#~ "exits. However this is occasionally useful for testing.\n"
-#~ msgstr ""
-#~ "reopen - close and reopen the libguestfs handle\n"
-#~ " reopen\n"
-#~ "\n"
-#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
-#~ "this normally, because the handle is closed properly when guestfish\n"
-#~ "exits. However this is occasionally useful for testing.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "sparse - allocate a sparse image file\n"
-#~ " sparse <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty sparse file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " In all respects it works the same as the 'alloc'\n"
-#~ " command, except that the image file is allocated\n"
-#~ " sparsely, which means that disk blocks are not assigned\n"
-#~ " to the file until they are needed. Sparse disk files\n"
-#~ " only use space when written to, but they are slower\n"
-#~ " and there is a danger you could run out of real disk\n"
-#~ " space during a write operation.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
-#~ msgstr ""
-#~ "sparse - allocate a sparse image file\n"
-#~ " sparse <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty sparse file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " In all respects it works the same as the 'alloc'\n"
-#~ " command, except that the image file is allocated\n"
-#~ " sparsely, which means that disk blocks are not assigned\n"
-#~ " to the file until they are needed. Sparse disk files\n"
-#~ " only use space when written to, but they are slower\n"
-#~ " and there is a danger you could run out of real disk\n"
-#~ " space during a write operation.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified (where <nn> means a number):\n"
-#~ " <nn> number of kilobytes\n"
-#~ " eg: 1440 standard 3.5\" floppy\n"
-#~ " <nn>K or <nn>KB number of kilobytes\n"
-#~ " <nn>M or <nn>MB number of megabytes\n"
-#~ " <nn>G or <nn>GB number of gigabytes\n"
-#~ " <nn>T or <nn>TB number of terabytes\n"
-#~ " <nn>P or <nn>PB number of petabytes\n"
-#~ " <nn>E or <nn>EB number of exabytes\n"
-#~ " <nn>sects number of 512 byte sectors\n"
-
-#~ msgid ""
-#~ "time - measure time taken to run command\n"
-#~ " time <command> [<args> ...]\n"
-#~ "\n"
-#~ " This runs <command> as usual, and prints the elapsed\n"
-#~ " time afterwards.\n"
-#~ msgstr ""
-#~ "time - measure time taken to run command\n"
-#~ " time <command> [<args> ...]\n"
-#~ "\n"
-#~ " This runs <command> as usual, and prints the elapsed\n"
-#~ " time afterwards.\n"
-
-#~ msgid "external command failed: %s"
-#~ msgstr "ਬਾਹਰੀ ਕਮਾਂਡ ਫੇਲ ਹੋਈ: %s"
-
-#~ msgid "test if file exists"
-#~ msgstr "ਵੇਖੋ ਕੀ ਫਾਇਲ ਮੌਜੂਦ ਹੈ"
-
-#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
-#~ msgstr "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
-
-#~ msgid "failed to connect to vmchannel socket"
-#~ msgstr "vmchannel ਸਾਕਟ ਨਾਲ ਜੁੜਨ ਤੋਂ ਫੇਲ ਹੋਇਆ"
-
-#, fuzzy
-#~ msgid ""
-#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
-#~ "selinux\n"
-#~ msgstr ""
-#~ "%s: cannot use -i option with -a, -m, --listen, --remote or --selinux\n"
-
-#, fuzzy
-#~ msgid "cpio command failed: {error}"
-#~ msgstr "ਕਮਾਂਡ ਫੇਲ ਹੋਈ: %s"
-
-#~ msgid ""
-#~ "alloc - allocate an image\n"
-#~ " alloc <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty (zeroed) file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified (where <nn> means a number):\n"
-#~ " <nn> number of kilobytes\n"
-#~ " eg: 1440 standard 3.5\" floppy\n"
-#~ " <nn>K or <nn>KB number of kilobytes\n"
-#~ " <nn>M or <nn>MB number of megabytes\n"
-#~ " <nn>G or <nn>GB number of gigabytes\n"
-#~ " <nn>T or <nn>TB number of terabytes\n"
-#~ " <nn>P or <nn>PB number of petabytes\n"
-#~ " <nn>E or <nn>EB number of exabytes\n"
-#~ " <nn>sects number of 512 byte sectors\n"
-#~ msgstr ""
-#~ "alloc - allocate an image\n"
-#~ " alloc <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty (zeroed) file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified (where <nn> means a number):\n"
-#~ " <nn> number of kilobytes\n"
-#~ " eg: 1440 standard 3.5\" floppy\n"
-#~ " <nn>K or <nn>KB number of kilobytes\n"
-#~ " <nn>M or <nn>MB number of megabytes\n"
-#~ " <nn>G or <nn>GB number of gigabytes\n"
-#~ " <nn>T or <nn>TB number of terabytes\n"
-#~ " <nn>P or <nn>PB number of petabytes\n"
-#~ " <nn>E or <nn>EB number of exabytes\n"
-#~ " <nn>sects number of 512 byte sectors\n"
-
-#~ msgid "%s: virt-inspector command too long for fixed-size buffer\n"
-#~ msgstr "%s: virt-inspector command too long for fixed-size buffer\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "\n"
-#~ "Welcome to hivexsh, the hivex interactive shell for examining\n"
-#~ "Windows Registry binary hive files.\n"
-#~ "\n"
-#~ "Type: 'help' for help summary\n"
-#~ " 'quit' to quit the shell\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\n"
-#~ "guestfish ਵੱਲੋਂ ਜੀ ਆਇਆ ਨੂੰ, ਵਰਚੁਅਲ ਮਸ਼ੀਨ ਫਾਇਲ-ਸਿਸਟਮ ਨੂੰ ਸੋਧਣ ਲਈ\n"
-#~ "libguestfs ਫਾਇਲ-ਸਿਸਟਮ ਸ਼ੈੱਲ।\n"
-#~ "\n"
-#~ "Type: 'help' for help with commands\n"
-#~ " 'quit' to quit the shell\n"
-#~ "\n"
git.annexia.org / libguestfs.git / blobdiff