+#, fuzzy
+#~ msgid " Mountpoints:\n"
+#~ msgstr "മൌണ്ട് പോയിന്റുകള്‍ കാണിക്കുക"
+
+#, fuzzy
+#~ msgid " Filesystems:\n"
+#~ msgstr "ഒരു ഫയല്‍സിസ്റ്റം ഉണ്ടാക്കുക"
+
+#~ msgid "allocate an image"
+#~ msgstr "ഒരു ചിത്രം അനുവദിക്കുക"
+
+#~ msgid "edit a file in the image"
+#~ msgstr "ചിത്രത്തില്‍ ഒരു ഫയലില്‍ മാറ്റം വരുത്തുക"
+
+#~ msgid "view a file in the pager"
+#~ msgstr "പേജറില്‍ ഒരു ഫയല്‍ കാണുക"
+
+#~ msgid ""
+#~ "echo - display a line of text\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " This echos the parameters to the terminal.\n"
+#~ msgstr ""
+#~ "echo - display a line of text\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " പരാമീറ്ററുകള്‍ ടെര്‍മിനലിലേക്കു് എക്കോ ചെയ്യുന്നു.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "edit - edit a file in the image\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " This is used to edit a file.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\", editing locally, and then \"write\".\n"
+#~ "\n"
+#~ " Normally it uses $EDITOR, but if you use the aliases\n"
+#~ " \"vi\" or \"emacs\" you will get those editors.\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "edit - edit a file in the image\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " This is used to edit a file.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\", editing locally, and then \"write-file\".\n"
+#~ "\n"
+#~ " Normally it uses $EDITOR, but if you use the aliases\n"
+#~ " \"vi\" or \"emacs\" you will get those editors.\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+
+#~ msgid ""
+#~ "lcd - local change directory\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " Change guestfish's current directory. This command is\n"
+#~ " useful if you want to download files to a particular\n"
+#~ " place.\n"
+#~ msgstr ""
+#~ "lcd - local change directory\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " guestfish-ന്റെ ഇപ്പോഴുള്ള ഡയറക്ടറി മാറ്റുക. ഒരു പ്രത്യേക സ്ഥലത്തേക്കു്\n"
+#~ " ഫയലുകള്‍ ഡൌണ്‍ലോഡ് ചെയ്യുന്നതിനായി ഈ കമാന്‍ഡ്\n"
+#~ " ഉപയോഗപ്പെടുന്നു.\n"
+
+#~ msgid ""
+#~ "glob - expand wildcards in command\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob runs <command> with wildcards expanded in any\n"
+#~ " command args. Note that the command is run repeatedly\n"
+#~ " once for each expanded argument.\n"
+#~ msgstr ""
+#~ "glob - expand wildcards in command\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " എത്ര കമാന്‍ഡ് ആര്‍ഗ്യുമെന്റുകളിലും വികസിപ്പിച്ച വൈള്‍ഡ്കാര്‍ഡിനൊപ്പം\n"
+#~ " Glob <command> പ്രവര്‍ത്തിപ്പിക്കുന്നു. ഓരോ വികസിച്ച ആര്‍ഗ്യുമെന്റിനും\n"
+#~ " കമാന്‍ഡ് ഓരോ തവണ ആവര്‍ത്തിക്കുന്നു.\n"
+
+#~ msgid ""
+#~ "more - view a file in the pager\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " This is used to view a file in the pager.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\" and using the pager.\n"
+#~ "\n"
+#~ " Normally it uses $PAGER, but if you use the alias\n"
+#~ " \"less\" then it always uses \"less\".\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "more - view a file in the pager\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " This is used to view a file in the pager.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\" and using the pager.\n"
+#~ "\n"
+#~ " Normally it uses $PAGER, but if you use the alias\n"
+#~ " \"less\" then it always uses \"less\".\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+
+#~ msgid ""
+#~ "reopen - close and reopen the libguestfs handle\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
+#~ "this normally, because the handle is closed properly when guestfish\n"
+#~ "exits. However this is occasionally useful for testing.\n"
+#~ msgstr ""
+#~ "reopen - close and reopen the libguestfs handle\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "libguestfs ഹാന്‍ഡില്‍ അടച്ചു് വീണ്ടും തുറക്കുക. ഇതു് സാധാരണയായി ഉപയോഗിക്കേണ്ടതില്ല,\n"
+#~ "കാരണം guestfish പുറത്തുകടക്കുമ്പോള്‍ ഹാന്‍ഡില്‍ ശരിയായി അടയ്ക്കപ്പെടുന്നു.\n"
+#~ "എന്നിരുന്നാലും , ചില പരീക്ഷണങ്ങള്‍ക്കായി ഇതു് ഉപയോഗപ്പെടുന്നു.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "sparse - allocate a sparse image file\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty sparse file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " In all respects it works the same as the 'alloc'\n"
+#~ " command, except that the image file is allocated\n"
+#~ " sparsely, which means that disk blocks are not assigned\n"
+#~ " to the file until they are needed. Sparse disk files\n"
+#~ " only use space when written to, but they are slower\n"
+#~ " and there is a danger you could run out of real disk\n"
+#~ " space during a write operation.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
+#~ msgstr ""
+#~ "sparse - allocate a sparse image file\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty sparse file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " In all respects it works the same as the 'alloc'\n"
+#~ " command, except that the image file is allocated\n"
+#~ " sparsely, which means that disk blocks are not assigned\n"
+#~ " to the file until they are needed. Sparse disk files\n"
+#~ " only use space when written to, but they are slower\n"
+#~ " and there is a danger you could run out of real disk\n"
+#~ " space during a write operation.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified (where <nn> means a number):\n"
+#~ " <nn> number of kilobytes\n"
+#~ " eg: 1440 standard 3.5\" floppy\n"
+#~ " <nn>K or <nn>KB number of kilobytes\n"
+#~ " <nn>M or <nn>MB number of megabytes\n"
+#~ " <nn>G or <nn>GB number of gigabytes\n"
+#~ " <nn>T or <nn>TB number of terabytes\n"
+#~ " <nn>P or <nn>PB number of petabytes\n"
+#~ " <nn>E or <nn>EB number of exabytes\n"
+#~ " <nn>sects number of 512 byte sectors\n"
+
+#~ msgid ""
+#~ "time - measure time taken to run command\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " This runs <command> as usual, and prints the elapsed\n"
+#~ " time afterwards.\n"
+#~ msgstr ""
+#~ "time - ഒരു കമാന്‍ഡ് പ്രവര്‍ത്തിപ്പിക്കുന്നതിനുള്ള സമയം അളക്കുന്നു\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " പതിവു് പോലെ ഇതു് <command> പ്രവര്‍ത്തിപ്പിക്കുന്നു, കൂടാതെ അതിനുശേഷമുള്ള\n"
+#~ " സമയം പ്രിന്റ് ചെയ്യുന്നു.\n"
+
+#~ msgid "external command failed: %s"
+#~ msgstr "എക്സ്റ്റേണല്‍ കമാന്‍ഡ് പരാജയപ്പെട്ടു: %s"
+
+#~ msgid "test if file exists"
+#~ msgstr "ഫയല്‍ നിലവിലുണ്ടെങ്കില്‍ പരീക്ഷിക്കുക"
+
+#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
+#~ msgstr "LIBGUESTFS_PATH-ല്‍ %s അല്ലെങ്കില്‍ %s ലഭ്യമല്ല (ഇപ്പോഴുള്ള പാഥ് = %s)"
+
+#~ msgid "failed to connect to vmchannel socket"
+#~ msgstr "vmchannel സോക്കറ്റിലേക്കു് കണക്ട് ചെയ്യുന്നതില്‍ പരാജയപ്പെട്ടു"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
+#~ "selinux\n"
+#~ msgstr ""
+#~ "%s: -a, -m, --listen, --remote അല്ലെങ്കില്‍ --selinux എന്നിവയ്ക്കൊപ്പം -i ഉപാധി "
+#~ "ഉപയോഗിക്കുവാന്‍ സാധ്യമല്ല\n"
+
+#, fuzzy
+#~ msgid "cpio command failed: {error}"
+#~ msgstr "കമാന്‍ഡ് പരാജയപ്പെട്ടു: %s"
git.annexia.org / libguestfs.git / blobdiff