+#: ../fish/guestfish.pod:423
+msgid ""
+"Commands to execute should be separated by a colon (C<:>), where the colon "
+"is a separate parameter. Thus:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:426
+#, no-wrap
+msgid ""
+" guestfish cmd [args...] : cmd [args...] : cmd [args...] ...\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:428
+msgid ""
+"If there are no additional arguments, then we enter a shell, either an "
+"interactive shell with a prompt (if the input is a terminal) or a non-"
+"interactive shell."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:432
+msgid ""
+"In either command line mode or non-interactive shell, the first command that "
+"gives an error causes the whole shell to exit. In interactive mode (with a "
+"prompt) if a command fails, you can continue to enter commands."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:437
+msgid "USING launch (OR run)"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:439
+msgid ""
+"As with L<guestfs(3)>, you must first configure your guest by adding disks, "
+"then launch it, then mount any disks you need, and finally issue actions/"
+"commands. So the general order of the day is:"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:447
+msgid "add or -a/--add"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:451
+msgid "launch (aka run)"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:455
+msgid "mount or -m/--mount"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:459
+msgid "any other commands"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:463
+msgid ""
+"C<run> is a synonym for C<launch>. You must C<launch> (or C<run>) your "
+"guest before mounting or performing any other commands."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:466
+msgid ""
+"The only exception is that if any of the I<-i>, I<-m>, I<--mount>, I<-N> or "
+"I<--new> options were given then C<run> is done automatically, simply "
+"because guestfish can't perform the action you asked for without doing this."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:471
+msgid "OPENING DISKS FOR READ AND WRITE"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:473
+msgid ""
+"The guestfish, L<guestmount(1)> and L<virt-rescue(1)> options I<--ro> and "
+"I<--rw> affect whether the other command line options I<-a>, I<-c>, I<-d>, "
+"I<-i> and I<-m> open disk images read-only or for writing."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:478
+msgid ""
+"In libguestfs E<le> 1.10, guestfish, guestmount and virt-rescue defaulted to "
+"opening disk images supplied on the command line for write. To open a disk "
+"image read-only you have to do I<-a image --ro>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:482
+msgid ""
+"This matters: If you accidentally open a live VM disk image writable then "
+"you will cause irreversible disk corruption."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:485
+msgid ""
+"In a future libguestfs we intend to change the default the other way. Disk "
+"images will be opened read-only. You will have to either specify "
+"I<guestfish --rw>, I<guestmount --rw>, I<virt-rescue --rw>, or change the "
+"configuration file C</etc/libguestfs-tools.conf> in order to get write "
+"access for disk images specified by those other command line options."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:492
+msgid ""
+"This version of guestfish, guestmount and virt-rescue has a I<--rw> option "
+"which does nothing (it is already the default). However it is highly "
+"recommended that you use this option to indicate that you need write access, "
+"and prepare your scripts for the day when this option will be required for "
+"write access."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:498
+msgid ""
+"B<Note:> This does I<not> affect commands like L</add> and L</mount>, or any "
+"other libguestfs program apart from guestfish and guestmount."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:501
+msgid "QUOTING"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:503
+msgid ""
+"You can quote ordinary parameters using either single or double quotes. For "
+"example:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:506
+#, no-wrap
+msgid ""
+" add \"file with a space.img\"\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:508
+#, no-wrap
+msgid ""
+" rm '/file name'\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:510
+#, no-wrap
+msgid ""
+" rm '/\"'\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:512
+msgid ""
+"A few commands require a list of strings to be passed. For these, use a "
+"whitespace-separated list, enclosed in quotes. Strings containing "
+"whitespace to be passed through must be enclosed in single quotes. A "
+"literal single quote must be escaped with a backslash."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:517
+#, no-wrap
+msgid ""
+" vgcreate VG \"/dev/sda1 /dev/sdb1\"\n"
+" command \"/bin/echo 'foo bar'\"\n"
+" command \"/bin/echo \\'foo\\'\"\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:521
+msgid "ESCAPE SEQUENCES IN DOUBLE QUOTED ARGUMENTS"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:523
+msgid ""
+"In double-quoted arguments (only) use backslash to insert special characters:"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:528
+msgid "C<\\a>"
+msgstr "C<\\a>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:530
+msgid "Alert (bell) character."
+msgstr "Символ гудка (дзвінка)."
+
+#. type: =item
+#: ../fish/guestfish.pod:532
+msgid "C<\\b>"
+msgstr "C<\\b>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:534
+msgid "Backspace character."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:536
+msgid "C<\\f>"
+msgstr "C<\\f>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:538
+msgid "Form feed character."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:540
+msgid "C<\\n>"
+msgstr "C<\\n>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:542
+msgid "Newline character."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:544
+msgid "C<\\r>"
+msgstr "C<\\r>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:546
+msgid "Carriage return character."
+msgstr "Символ повернення каретки."
+
+#. type: =item
+#: ../fish/guestfish.pod:548
+msgid "C<\\t>"
+msgstr "C<\\t>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:550
+msgid "Horizontal tab character."
+msgstr "Символ горизонтальної табуляції"
+
+#. type: =item
+#: ../fish/guestfish.pod:552
+msgid "C<\\v>"
+msgstr "C<\\v>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:554
+msgid "Vertical tab character."
+msgstr "Символ вертикальної табуляції."
+
+#. type: =item
+#: ../fish/guestfish.pod:556
+msgid "C<\\\">"
+msgstr "C<\\\">"
+
+#. type: textblock
+#: ../fish/guestfish.pod:558
+msgid "A literal double quote character."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:560
+msgid "C<\\ooo>"
+msgstr "C<\\ooo>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:562
+msgid ""
+"A character with octal value I<ooo>. There must be precisely 3 octal digits "
+"(unlike C)."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:565
+msgid "C<\\xhh>"
+msgstr "C<\\xhh>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:567
+msgid ""
+"A character with hex value I<hh>. There must be precisely 2 hex digits."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:570
+msgid ""
+"In the current implementation C<\\000> and C<\\x00> cannot be used in "
+"strings."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:573
+msgid "C<\\\\>"
+msgstr "C<\\\\>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:575
+msgid "A literal backslash character."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:579
+msgid "OPTIONAL ARGUMENTS"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:581
+msgid ""
+"Some commands take optional arguments. These arguments appear in this "
+"documentation as C<[argname:..]>. You can use them as in these examples:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:585
+#, no-wrap
+msgid ""
+" add-drive-opts filename\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:587
+#, no-wrap
+msgid ""
+" add-drive-opts filename readonly:true\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:589
+#, no-wrap
+msgid ""
+" add-drive-opts filename format:qcow2 readonly:false\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:591
+msgid ""
+"Each optional argument can appear at most once. All optional arguments must "
+"appear after the required ones."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:594
+msgid "NUMBERS"
+msgstr "ЧИСЛА"
+
+#. type: textblock
+#: ../fish/guestfish.pod:596
+msgid ""
+"This section applies to all commands which can take integers as parameters."
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:599
+msgid "SIZE SUFFIX"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:601
+msgid ""
+"When the command takes a parameter measured in bytes, you can use one of the "
+"following suffixes to specify kilobytes, megabytes and larger sizes:"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:607
+msgid "B<k> or B<K> or B<KiB>"
+msgstr "B<k>, B<K> або B<KiB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:609
+msgid "The size in kilobytes (multiplied by 1024)."
+msgstr "Розмір у кілобайтах (у одному кілобайті 1024 байтів)."
+
+#. type: =item
+#: ../fish/guestfish.pod:611
+msgid "B<KB>"
+msgstr "B<KB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:613
+msgid "The size in SI 1000 byte units."
+msgstr "Розмір у одиницях СІ: 1000 байтів."
+
+#. type: =item
+#: ../fish/guestfish.pod:615
+msgid "B<M> or B<MiB>"
+msgstr "B<M> або B<MiB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:617
+msgid "The size in megabytes (multiplied by 1048576)."
+msgstr "Розмір у мегабайтах (у одному мегабайті 1048576 байтів)."
+
+#. type: =item
+#: ../fish/guestfish.pod:619
+msgid "B<MB>"
+msgstr "B<MB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:621
+msgid "The size in SI 1000000 byte units."
+msgstr "Розмір у одиницях СІ: 1000000 байтів."
+
+#. type: =item
+#: ../fish/guestfish.pod:623
+msgid "B<G> or B<GiB>"
+msgstr "B<G> або B<GiB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:625
+msgid "The size in gigabytes (multiplied by 2**30)."
+msgstr "Розмір у гігабайтах (з множником 2**30)."
+
+#. type: =item
+#: ../fish/guestfish.pod:627
+msgid "B<GB>"
+msgstr "B<GB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:629
+msgid "The size in SI 10**9 byte units."
+msgstr "Розмір у одиницях СІ: 10**9 байтів."
+
+#. type: =item
+#: ../fish/guestfish.pod:631
+msgid "B<T> or B<TiB>"
+msgstr "B<T> або B<TiB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:633
+msgid "The size in terabytes (multiplied by 2**40)."
+msgstr "Розмір у терабайтах (з множником 2**40)."
+
+#. type: =item
+#: ../fish/guestfish.pod:635
+msgid "B<TB>"
+msgstr "B<TB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:637
+msgid "The size in SI 10**12 byte units."
+msgstr "Розмір у одиницях СІ: 10**12 байтів."
+
+#. type: =item
+#: ../fish/guestfish.pod:639
+msgid "B<P> or B<PiB>"
+msgstr "B<P> або B<PiB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:641
+msgid "The size in petabytes (multiplied by 2**50)."
+msgstr "Розмір у петабайтах (у одному петабайті 2**50 байтів)."
+
+#. type: =item
+#: ../fish/guestfish.pod:643
+msgid "B<PB>"
+msgstr "B<PB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:645
+msgid "The size in SI 10**15 byte units."
+msgstr "Розмір у одиницях СІ: 10**15 байтів."
+
+#. type: =item
+#: ../fish/guestfish.pod:647
+msgid "B<E> or B<EiB>"
+msgstr "B<E> або B<EiB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:649
+msgid "The size in exabytes (multiplied by 2**60)."
+msgstr "Розмір у ексабайтах (у одному ексабайті 2**60 байтів)."
+
+#. type: =item
+#: ../fish/guestfish.pod:651
+msgid "B<EB>"
+msgstr "B<EB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:653
+msgid "The size in SI 10**18 byte units."
+msgstr "Розмір у одиницях СІ: 10**18 байтів."
+
+#. type: =item
+#: ../fish/guestfish.pod:655
+msgid "B<Z> or B<ZiB>"
+msgstr "B<Z> або B<ZiB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:657
+msgid "The size in zettabytes (multiplied by 2**70)."
+msgstr "Розмір у зетабайтах (у одному зетабайті 2**70 байтів)."
+
+#. type: =item
+#: ../fish/guestfish.pod:659
+msgid "B<ZB>"
+msgstr "B<ZB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:661
+msgid "The size in SI 10**21 byte units."
+msgstr "Розмір у одиницях СІ: 10**21 байтів."
+
+#. type: =item
+#: ../fish/guestfish.pod:663
+msgid "B<Y> or B<YiB>"
+msgstr "B<Y> або B<YiB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:665
+msgid "The size in yottabytes (multiplied by 2**80)."
+msgstr "Розмір у йотабайтах (у одному йотабайті 2**80 байтів)."
+
+#. type: =item
+#: ../fish/guestfish.pod:667
+msgid "B<YB>"
+msgstr "B<YB>"
+
+#. type: textblock
+#: ../fish/guestfish.pod:669
+msgid "The size in SI 10**24 byte units."
+msgstr "Розмір у одиницях СІ: 10**24 байтів."
+
+#. type: verbatim
+#: ../fish/guestfish.pod:675
+#, no-wrap
+msgid ""
+" truncate-size /file 1G\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:677
+msgid "would truncate the file to 1 gigabyte."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:679
+msgid ""
+"Be careful because a few commands take sizes in kilobytes or megabytes (eg. "
+"the parameter to L</memsize> is specified in megabytes already). Adding a "
+"suffix will probably not do what you expect."
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:683
+msgid "OCTAL AND HEXADECIMAL NUMBERS"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:685
+msgid ""
+"For specifying the radix (base) use the C convention: C<0> to prefix an "
+"octal number or C<0x> to prefix a hexadecimal number. For example:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:688
+#, no-wrap
+msgid ""
+" 1234 decimal number 1234\n"
+" 02322 octal number, equivalent to decimal 1234\n"
+" 0x4d2 hexadecimal number, equivalent to decimal 1234\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:692
+msgid ""
+"When using the C<chmod> command, you almost always want to specify an octal "
+"number for the mode, and you must prefix it with C<0> (unlike the Unix "
+"L<chmod(1)> program):"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:696
+#, no-wrap
+msgid ""
+" chmod 0777 /public # OK\n"
+" chmod 777 /public # WRONG! This is mode 777 decimal = 01411 octal.\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:699
+msgid ""
+"Commands that return numbers usually print them in decimal, but some "
+"commands print numbers in other radices (eg. C<umask> prints the mode in "
+"octal, preceeded by C<0>)."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:703
+msgid "WILDCARDS AND GLOBBING"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:705
+msgid ""
+"Neither guestfish nor the underlying guestfs API performs wildcard expansion "
+"(globbing) by default. So for example the following will not do what you "
+"expect:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:709
+#, no-wrap
+msgid ""
+" rm-rf /home/*\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:711
+msgid ""
+"Assuming you don't have a directory called literally C</home/*> then the "
+"above command will return an error."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:714
+msgid "To perform wildcard expansion, use the C<glob> command."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:716
+#, no-wrap
+msgid ""
+" glob rm-rf /home/*\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:718
+msgid ""
+"runs C<rm-rf> on each path that matches (ie. potentially running the command "
+"many times), equivalent to:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:721
+#, no-wrap
+msgid ""
+" rm-rf /home/jim\n"
+" rm-rf /home/joe\n"
+" rm-rf /home/mary\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:725
+msgid "C<glob> only works on simple guest paths and not on device names."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:727
+msgid ""
+"If you have several parameters, each containing a wildcard, then glob will "
+"perform a Cartesian product."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:730
+msgid "COMMENTS"
+msgstr "КОМЕНТАРІ"
+
+#. type: textblock
+#: ../fish/guestfish.pod:732
+msgid ""
+"Any line which starts with a I<#> character is treated as a comment and "
+"ignored. The I<#> can optionally be preceeded by whitespace, but B<not> by "
+"a command. For example:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:736
+#, no-wrap
+msgid ""
+" # this is a comment\n"
+" # this is a comment\n"
+" foo # NOT a comment\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:740
+msgid "Blank lines are also ignored."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:742
+msgid "RUNNING COMMANDS LOCALLY"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:744
+msgid ""
+"Any line which starts with a I<!> character is treated as a command sent to "
+"the local shell (C</bin/sh> or whatever L<system(3)> uses). For example:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:748
+#, no-wrap
+msgid ""
+" !mkdir local\n"
+" tgz-out /remote local/remote-data.tar.gz\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:751
+msgid ""
+"will create a directory C<local> on the host, and then export the contents "
+"of C</remote> on the mounted filesystem to C<local/remote-data.tar.gz>. "
+"(See C<tgz-out>)."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:755
+msgid ""
+"To change the local directory, use the C<lcd> command. C<!cd> will have no "
+"effect, due to the way that subprocesses work in Unix."
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:758
+msgid "LOCAL COMMANDS WITH INLINE EXECUTION"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:760
+msgid ""
+"If a line starts with I<E<lt>!> then the shell command is executed (as for "
+"I<!>), but subsequently any output (stdout) of the shell command is parsed "
+"and executed as guestfish commands."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:764
+msgid ""
+"Thus you can use shell script to construct arbitrary guestfish commands "
+"which are then parsed by guestfish."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:767
+msgid ""
+"For example it is tedious to create a sequence of files (eg. C</foo.1> "
+"through C</foo.100>) using guestfish commands alone. However this is simple "
+"if we use a shell script to create the guestfish commands for us:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:772
+#, no-wrap
+msgid ""
+" <! for n in `seq 1 100`; do echo write /foo.$n $n; done\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:774
+msgid "or with names like C</foo.001>:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:776
+#, no-wrap
+msgid ""
+" <! for n in `seq 1 100`; do printf \"write /foo.%03d %d\\n\" $n $n; done\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:778
+msgid ""
+"When using guestfish interactively it can be helpful to just run the shell "
+"script first (ie. remove the initial C<E<lt>> character so it is just an "
+"ordinary I<!> local command), see what guestfish commands it would run, and "
+"when you are happy with those prepend the C<E<lt>> character to run the "
+"guestfish commands for real."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:784
+msgid "PIPES"
+msgstr "КАНАЛИ"
+
+#. type: textblock
+#: ../fish/guestfish.pod:786
+msgid ""
+"Use C<command E<lt>spaceE<gt> | command> to pipe the output of the first "
+"command (a guestfish command) to the second command (any host command). For "
+"example:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:790
+#, no-wrap
+msgid ""
+" cat /etc/passwd | awk -F: '$3 == 0 { print }'\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:792
+msgid ""
+"(where C<cat> is the guestfish cat command, but C<awk> is the host awk "
+"program). The above command would list all accounts in the guest filesystem "
+"which have UID 0, ie. root accounts including backdoors. Other examples:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:797
+#, no-wrap
+msgid ""
+" hexdump /bin/ls | head\n"
+" list-devices | tail -1\n"
+" tgz-out / - | tar ztf -\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:801
+msgid ""
+"The space before the pipe symbol is required, any space after the pipe "
+"symbol is optional. Everything after the pipe symbol is just passed "
+"straight to the host shell, so it can contain redirections, globs and "
+"anything else that makes sense on the host side."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:806
+msgid ""
+"To use a literal argument which begins with a pipe symbol, you have to quote "
+"it, eg:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:809
+#, no-wrap
+msgid ""
+" echo \"|\"\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:811
+msgid "HOME DIRECTORIES"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:813
+msgid ""
+"If a parameter starts with the character C<~> then the tilde may be expanded "
+"as a home directory path (either C<~> for the current user's home directory, "
+"or C<~user> for another user)."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:817
+msgid ""
+"Note that home directory expansion happens for users known I<on the host>, "
+"not in the guest filesystem."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:820
+msgid ""
+"To use a literal argument which begins with a tilde, you have to quote it, "
+"eg:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:823
+#, no-wrap
+msgid ""
+" echo \"~\"\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:825 ../src/guestfs.pod:534
+msgid "ENCRYPTED DISKS"
+msgstr "ЗАШИФРОВАНІ ДИСКИ"
+
+#. type: textblock
+#: ../fish/guestfish.pod:827
+msgid ""
+"Libguestfs has some support for Linux guests encrypted according to the "
+"Linux Unified Key Setup (LUKS) standard, which includes nearly all whole "
+"disk encryption systems used by modern Linux guests. Currently only LVM-on-"
+"LUKS is supported."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:832
+msgid "Identify encrypted block devices and partitions using L</vfs-type>:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:834
+#, no-wrap
+msgid ""
+" ><fs> vfs-type /dev/sda2\n"
+" crypto_LUKS\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:837
+msgid ""
+"Then open those devices using L</luks-open>. This creates a device-mapper "
+"device called C</dev/mapper/luksdev>."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:840
+#, no-wrap
+msgid ""
+" ><fs> luks-open /dev/sda2 luksdev\n"
+" Enter key or passphrase (\"key\"): <enter the passphrase>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:843
+msgid ""
+"Finally you have to tell LVM to scan for volume groups on the newly created "
+"mapper device:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:846
+#, no-wrap
+msgid ""
+" vgscan\n"
+" vg-activate-all true\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:849
+msgid "The logical volume(s) can now be mounted in the usual way."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:851
+msgid ""
+"Before closing a LUKS device you must unmount any logical volumes on it and "
+"deactivate the volume groups by calling C<vg-activate false VG> on each "
+"one. Then you can close the mapper device:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:855
+#, no-wrap
+msgid ""
+" vg-activate false /dev/VG\n"
+" luks-close /dev/mapper/luksdev\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:860
+msgid ""
+"If a path is prefixed with C<win:> then you can use Windows-style drive "
+"letters and paths (with some limitations). The following commands are "
+"equivalent:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:864
+#, no-wrap
+msgid ""
+" file /WINDOWS/system32/config/system.LOG\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:866
+#, no-wrap
+msgid ""
+" file win:\\windows\\system32\\config\\system.log\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:868
+#, no-wrap
+msgid ""
+" file WIN:C:\\Windows\\SYSTEM32\\CONFIG\\SYSTEM.LOG\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:870
+msgid ""
+"The parameter is rewritten \"behind the scenes\" by looking up the position "
+"where the drive is mounted, prepending that to the path, changing all "
+"backslash characters to forward slash, then resolving the result using L</"
+"case-sensitive-path>. For example if the E: drive was mounted on C</e> then "
+"the parameter might be rewritten like this:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:876
+#, no-wrap
+msgid ""
+" win:e:\\foo\\bar => /e/FOO/bar\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:878
+msgid "This only works in argument positions that expect a path."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:880
+msgid "UPLOADING AND DOWNLOADING FILES"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:882
+msgid ""
+"For commands such as C<upload>, C<download>, C<tar-in>, C<tar-out> and "
+"others which upload from or download to a local file, you can use the "
+"special filename C<-> to mean \"from stdin\" or \"to stdout\". For example:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:886
+#, no-wrap
+msgid ""
+" upload - /foo\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:888
+msgid ""
+"reads stdin and creates from that a file C</foo> in the disk image, and:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:891
+#, no-wrap
+msgid ""
+" tar-out /etc - | tar tf -\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:893
+msgid ""
+"writes the tarball to stdout and then pipes that into the external \"tar\" "
+"command (see L</PIPES>)."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:896
+msgid ""
+"When using C<-> to read from stdin, the input is read up to the end of "
+"stdin. You can also use a special \"heredoc\"-like syntax to read up to "
+"some arbitrary end marker:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:900
+#, no-wrap
+msgid ""
+" upload -<<END /foo\n"
+" input line 1\n"
+" input line 2\n"
+" input line 3\n"
+" END\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:906
+msgid ""
+"Any string of characters can be used instead of C<END>. The end marker must "
+"appear on a line of its own, without any preceeding or following characters "
+"(not even spaces)."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:910
+msgid ""
+"Note that the C<-E<lt>E<lt>> syntax only applies to parameters used to "
+"upload local files (so-called \"FileIn\" parameters in the generator)."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:913
+msgid "EXIT ON ERROR BEHAVIOUR"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:915
+msgid ""
+"By default, guestfish will ignore any errors when in interactive mode (ie. "
+"taking commands from a human over a tty), and will exit on the first error "
+"in non-interactive mode (scripts, commands given on the command line)."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:920
+msgid ""
+"If you prefix a command with a I<-> character, then that command will not "
+"cause guestfish to exit, even if that (one) command returns an error."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:924
+msgid "REMOTE CONTROL GUESTFISH OVER A SOCKET"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:926
+msgid ""
+"Guestfish can be remote-controlled over a socket. This is useful "
+"particularly in shell scripts where you want to make several different "
+"changes to a filesystem, but you don't want the overhead of starting up a "
+"guestfish process each time."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:931
+msgid "Start a guestfish server process using:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:933
+#, no-wrap
+msgid ""
+" eval \"`guestfish --listen`\"\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:935
+msgid "and then send it commands by doing:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:937
+#, no-wrap
+msgid ""
+" guestfish --remote cmd [...]\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:939
+msgid "To cause the server to exit, send it the exit command:"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:943
+msgid ""
+"Note that the server will normally exit if there is an error in a command. "
+"You can change this in the usual way. See section L</EXIT ON ERROR "
+"BEHAVIOUR>."
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:947
+msgid "CONTROLLING MULTIPLE GUESTFISH PROCESSES"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:949
+msgid ""
+"The C<eval> statement sets the environment variable C<$GUESTFISH_PID>, which "
+"is how the I<--remote> option knows where to send the commands. You can "
+"have several guestfish listener processes running using:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:953
+#, no-wrap
+msgid ""
+" eval \"`guestfish --listen`\"\n"
+" pid1=$GUESTFISH_PID\n"
+" eval \"`guestfish --listen`\"\n"
+" pid2=$GUESTFISH_PID\n"
+" ...\n"
+" guestfish --remote=$pid1 cmd\n"
+" guestfish --remote=$pid2 cmd\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:961
+msgid "REMOTE CONTROL AND CSH"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:963
+msgid ""
+"When using csh-like shells (csh, tcsh etc) you have to add the I<--csh> "
+"option:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:966
+#, no-wrap
+msgid ""
+" eval \"`guestfish --listen --csh`\"\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:968
+msgid "REMOTE CONTROL DETAILS"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:970
+msgid ""
+"Remote control happens over a Unix domain socket called C</tmp/.guestfish-"
+"$UID/socket-$PID>, where C<$UID> is the effective user ID of the process, "
+"and C<$PID> is the process ID of the server."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:974
+msgid "Guestfish client and server versions must match exactly."
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:976
+msgid "USING REMOTE CONTROL ROBUSTLY FROM SHELL SCRIPTS"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:978
+msgid ""
+"From Bash, you can use the following code which creates a guestfish "
+"instance, correctly quotes the command line, handles failure to start, and "
+"cleans up guestfish when the script exits:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:982 ../src/guestfs.pod:980
+#, no-wrap
+msgid ""
+" #!/bin/bash -\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:986
+#, no-wrap
+msgid ""
+" guestfish[0]=\"guestfish\"\n"
+" guestfish[1]=\"--listen\"\n"
+" guestfish[2]=\"--ro\"\n"
+" guestfish[3]=\"-a\"\n"
+" guestfish[4]=\"disk.img\"\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:992
+#, no-wrap
+msgid ""
+" GUESTFISH_PID=\n"
+" eval $(\"${guestfish[@]}\")\n"
+" if [ -z \"$GUESTFISH_PID\" ]; then\n"
+" echo \"error: guestfish didn't start up, see error messages above\"\n"
+" exit 1\n"
+" fi\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:999
+#, no-wrap
+msgid ""
+" cleanup_guestfish ()\n"
+" {\n"
+" guestfish --remote -- exit >/dev/null 2>&1 ||:\n"
+" }\n"
+" trap cleanup_guestfish EXIT ERR\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1005
+#, no-wrap
+msgid ""
+" guestfish --remote -- run\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1007
+#, no-wrap
+msgid ""
+" # ...\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:1009
+msgid "REMOTE CONTROL RUN COMMAND HANGING"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1011
+msgid ""
+"Using the C<run> (or C<launch>) command remotely in a command substitution "
+"context hangs, ie. don't do (note the backquotes):"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1014
+#, no-wrap
+msgid ""
+" a=`guestfish --remote run`\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1016
+msgid ""
+"Since the C<run> command produces no output on stdout, this is not useful "
+"anyway. For further information see L<https://bugzilla.redhat.com/show_bug."
+"cgi?id=592910>."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:1020
+msgid "PREPARED DISK IMAGES"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1022
+msgid ""
+"Use the I<-N type> or I<--new type> parameter to select one of a set of "
+"preformatted disk images that guestfish can make for you to save typing. "
+"This is particularly useful for testing purposes. This option is used "
+"instead of the I<-a> option, and like I<-a> can appear multiple times (and "
+"can be mixed with I<-a>)."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1028
+msgid ""
+"The new disk is called C<test1.img> for the first I<-N>, C<test2.img> for "
+"the second and so on. Existing files in the current directory are "
+"I<overwritten>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1032
+msgid ""
+"The type briefly describes how the disk should be sized, partitioned, how "
+"filesystem(s) should be created, and how content should be added. "
+"Optionally the type can be followed by extra parameters, separated by C<:> "
+"(colon) characters. For example, I<-N fs> creates a default 100MB, sparsely-"
+"allocated disk, containing a single partition, with the partition formatted "
+"as ext2. I<-N fs:ext4:1G> is the same, but for an ext4 filesystem on a 1GB "
+"disk instead."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1040
+msgid "To list the available types and any extra parameters they take, run:"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1044
+msgid ""
+"Note that the prepared filesystem is not mounted. You would usually have to "
+"use the C<mount /dev/sda1 /> command or add the I<-m /dev/sda1> option."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1048
+msgid ""
+"If any I<-N> or I<--new> options are given, the guest is automatically "
+"launched."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1053
+msgid "Create a 100MB disk with an ext4-formatted partition:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1055
+#, no-wrap
+msgid ""
+" guestfish -N fs:ext4\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1057
+msgid "Create a 32MB disk with a VFAT-formatted partition, and mount it:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1059
+#, no-wrap
+msgid ""
+" guestfish -N fs:vfat:32M -m /dev/sda1\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1061
+msgid "Create a blank 200MB disk:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1063
+#, no-wrap
+msgid ""
+" guestfish -N disk:200M\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:1065
+msgid "PROGRESS BARS"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1067
+msgid ""
+"Some (not all) long-running commands send progress notification messages as "
+"they are running. Guestfish turns these messages into progress bars."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1071
+msgid ""
+"When a command that supports progress bars takes longer than two seconds to "
+"run, and if progress bars are enabled, then you will see one appearing below "
+"the command:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1075
+#, no-wrap
+msgid ""
+" ><fs> copy-size /large-file /another-file 2048M\n"
+" / 10% [#####-----------------------------------------] 00:30\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1078
+msgid ""
+"The spinner on the left hand side moves round once for every progress "
+"notification received from the backend. This is a (reasonably) golden "
+"assurance that the command is \"doing something\" even if the progress bar "
+"is not moving, because the command is able to send the progress "
+"notifications. When the bar reaches 100% and the command finishes, the "
+"spinner disappears."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1085
+msgid ""
+"Progress bars are enabled by default when guestfish is used interactively. "
+"You can enable them even for non-interactive modes using I<--progress-bars>, "
+"and you can disable them completely using I<--no-progress-bars>."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:1090
+msgid "GUESTFISH COMMANDS"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1092
+msgid ""
+"The commands in this section are guestfish convenience commands, in other "
+"words, they are not part of the L<guestfs(3)> API."
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:1095
+msgid "help"
+msgstr "help"
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1097
+#, no-wrap
+msgid ""
+" help\n"
+" help cmd\n"
+"\n"
+msgstr ""
+" help\n"
+" help команда\n"
+"\n"
+
+#. type: textblock
+#: ../fish/guestfish.pod:1100
+msgid "Without any parameter, this provides general help."
+msgstr "Без параметра показує загальну довідкову інформацію."
+
+#. type: textblock
+#: ../fish/guestfish.pod:1102
+msgid "With a C<cmd> parameter, this displays detailed help for that command."
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:1104
+msgid "quit | exit"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1106
+msgid "This exits guestfish. You can also use C<^D> key."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1108
+msgid "@FISH_COMMANDS@"
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:1110
+msgid "COMMANDS"
+msgstr "КОМАНДИ"
+
+#. type: textblock
+#: ../fish/guestfish.pod:1112 ../src/guestfs.pod:1520
+msgid "@ACTIONS@"
+msgstr "@ACTIONS@"
+
+#. type: textblock
+#: ../fish/guestfish.pod:1116
+msgid ""
+"guestfish returns 0 if the commands completed without error, or 1 if there "
+"was an error."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1123
+msgid "EDITOR"
+msgstr "РЕДАКТОР"
+
+#. type: textblock
+#: ../fish/guestfish.pod:1125
+msgid ""
+"The C<edit> command uses C<$EDITOR> as the editor. If not set, it uses "
+"C<vi>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1128 ../src/guestfs.pod:3213
+msgid "FEBOOTSTRAP_KERNEL"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1130 ../src/guestfs.pod:3215
+msgid "FEBOOTSTRAP_MODULES"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1132 ../src/guestfs.pod:3217
+msgid ""
+"These two environment variables allow the kernel that libguestfs uses in the "
+"appliance to be selected. If C<$FEBOOTSTRAP_KERNEL> is not set, then the "
+"most recent host kernel is chosen. For more information about kernel "
+"selection, see L<febootstrap-supermin-helper(8)>. This feature is only "
+"available in febootstrap E<ge> 3.8."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1138
+msgid "GUESTFISH_DISPLAY_IMAGE"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1140
+msgid ""
+"The C<display> command uses C<$GUESTFISH_DISPLAY_IMAGE> to display images. "
+"If not set, it uses L<display(1)>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1143
+msgid "GUESTFISH_PID"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1145
+msgid ""
+"Used with the I<--remote> option to specify the remote guestfish process to "
+"control. See section L</REMOTE CONTROL GUESTFISH OVER A SOCKET>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1149
+msgid "HEXEDITOR"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1151
+msgid ""
+"The L</hexedit> command uses C<$HEXEDITOR> as the external hex editor. If "
+"not specified, the external L<hexedit(1)> program is used."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1155
+msgid "HOME"
+msgstr "ДОМІВКА"
+
+#. type: textblock
+#: ../fish/guestfish.pod:1157
+msgid ""
+"If compiled with GNU readline support, various files in the home directory "
+"can be used. See L</FILES>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1160 ../src/guestfs.pod:3223
+msgid "LIBGUESTFS_APPEND"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1162 ../src/guestfs.pod:3225
+msgid "Pass additional options to the guest kernel."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1164 ../src/guestfs.pod:3227
+msgid "LIBGUESTFS_DEBUG"
+msgstr "LIBGUESTFS_DEBUG"
+
+#. type: textblock
+#: ../fish/guestfish.pod:1166
+msgid ""
+"Set C<LIBGUESTFS_DEBUG=1> to enable verbose messages. This has the same "
+"effect as using the B<-v> option."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1169 ../src/guestfs.pod:3232
+msgid "LIBGUESTFS_MEMSIZE"
+msgstr "LIBGUESTFS_MEMSIZE"
+
+#. type: textblock
+#: ../fish/guestfish.pod:1171 ../src/guestfs.pod:3234
+msgid ""
+"Set the memory allocated to the qemu process, in megabytes. For example:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1174 ../src/guestfs.pod:3237
+#, no-wrap
+msgid ""
+" LIBGUESTFS_MEMSIZE=700\n"
+"\n"
+msgstr ""
+" LIBGUESTFS_MEMSIZE=700\n"
+"\n"
+
+#. type: =item
+#: ../fish/guestfish.pod:1176 ../src/guestfs.pod:3239
+msgid "LIBGUESTFS_PATH"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1178
+msgid ""
+"Set the path that guestfish uses to search for kernel and initrd.img. See "
+"the discussion of paths in L<guestfs(3)>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1181 ../src/guestfs.pod:3244
+msgid "LIBGUESTFS_QEMU"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1183 ../src/guestfs.pod:3246
+msgid ""
+"Set the default qemu binary that libguestfs uses. If not set, then the qemu "
+"which was found at compile time by the configure script is used."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1187 ../src/guestfs.pod:3252
+msgid "LIBGUESTFS_TRACE"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1189
+msgid "Set C<LIBGUESTFS_TRACE=1> to enable command traces."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1191
+msgid "PAGER"
+msgstr "РОЗБИТТЯ НА СТОРІНКИ"
+
+#. type: textblock
+#: ../fish/guestfish.pod:1193
+msgid ""
+"The C<more> command uses C<$PAGER> as the pager. If not set, it uses "
+"C<more>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1196 ../sparsify/virt-sparsify.pod:236
+#: ../src/guestfs.pod:3257
+msgid "TMPDIR"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1198 ../src/guestfs.pod:3259
+msgid ""
+"Location of temporary directory, defaults to C</tmp> except for the cached "
+"supermin appliance which defaults to C</var/tmp>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1201 ../src/guestfs.pod:3262
+msgid ""
+"If libguestfs was compiled to use the supermin appliance then the real "
+"appliance is cached in this directory, shared between all handles belonging "
+"to the same EUID. You can use C<$TMPDIR> to configure another directory to "
+"use in case C</var/tmp> is not large enough."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:1209 ../fuse/guestmount.pod:297
+#: ../rescue/virt-rescue.pod:310
+msgid "FILES"
+msgstr "ФАЙЛИ"
+
+#. type: =item
+#: ../fish/guestfish.pod:1213 ../fuse/guestmount.pod:301
+#: ../rescue/virt-rescue.pod:314
+msgid "$HOME/.libguestfs-tools.rc"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1215 ../fuse/guestmount.pod:303
+#: ../rescue/virt-rescue.pod:316
+msgid "/etc/libguestfs-tools.conf"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1217 ../fuse/guestmount.pod:305
+#: ../rescue/virt-rescue.pod:318
+msgid ""
+"This configuration file controls the default read-only or read-write mode "
+"(I<--ro> or I<--rw>)."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1220
+msgid "See L</OPENING DISKS FOR READ AND WRITE>."
+msgstr "Див. L</OPENING DISKS FOR READ AND WRITE>."
+
+#. type: =item
+#: ../fish/guestfish.pod:1222
+msgid "$HOME/.guestfish"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1224
+msgid ""
+"If compiled with GNU readline support, then the command history is saved in "
+"this file."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1227
+msgid "$HOME/.inputrc"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1229
+msgid "/etc/inputrc"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1231
+msgid ""
+"If compiled with GNU readline support, then these files can be used to "
+"configure readline. For further information, please see L<readline(3)/"
+"INITIALIZATION FILE>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1235
+msgid "To write rules which only apply to guestfish, use:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1237
+#, no-wrap
+msgid ""
+" $if guestfish\n"
+" ...\n"
+" $endif\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1241
+msgid ""
+"Variables that you can set in inputrc that change the behaviour of guestfish "
+"in useful ways include:"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1246
+msgid "completion-ignore-case (default: on)"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1248
+msgid ""
+"By default, guestfish will ignore case when tab-completing paths on the "
+"disk. Use:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1251
+#, no-wrap
+msgid ""
+" set completion-ignore-case off\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1253
+msgid "to make guestfish case sensitive."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1257
+msgid "test1.img"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1259
+msgid "test2.img (etc)"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1261
+msgid ""
+"When using the I<-N> or I<--new> option, the prepared disk or filesystem "
+"will be created in the file C<test1.img> in the current directory. The "
+"second use of I<-N> will use C<test2.img> and so on. Any existing file with "
+"the same name will be overwritten."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1270
+msgid ""
+"L<guestfs(3)>, L<http://libguestfs.org/>, L<virt-alignment-scan(1)>, L<virt-"
+"cat(1)>, L<virt-copy-in(1)>, L<virt-copy-out(1)>, L<virt-df(1)>, L<virt-edit"
+"(1)>, L<virt-filesystems(1)>, L<virt-inspector(1)>, L<virt-list-filesystems"
+"(1)>, L<virt-list-partitions(1)>, L<virt-ls(1)>, L<virt-make-fs(1)>, L<virt-"
+"rescue(1)>, L<virt-resize(1)>, L<virt-sparsify(1)>, L<virt-sysprep(1)>, "
+"L<virt-tar(1)>, L<virt-tar-in(1)>, L<virt-tar-out(1)>, L<virt-win-reg(1)>, "
+"L<display(1)>, L<hexedit(1)>, L<febootstrap-supermin-helper(8)>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1302 ../src/guestfs.pod:3354
+#: ../test-tool/libguestfs-test-tool.pod:112
+msgid "Copyright (C) 2009-2011 Red Hat Inc. L<http://libguestfs.org/>"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:5
+msgid ""
+"virt-copy-in - Copy files and directories into a virtual machine disk image."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-in.pod:9
+#, no-wrap
+msgid ""
+" virt-copy-in -a disk.img file|dir [file|dir ...] /destination\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-in.pod:11
+#, no-wrap
+msgid ""
+" virt-copy-in -d domain file|dir [file|dir ...] /destination\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:15
+msgid ""
+"Using C<virt-copy-in> on live virtual machines can be dangerous, potentially "
+"causing disk corruption. The virtual machine must be shut down before you "
+"use this command."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:21
+msgid ""
+"C<virt-copy-in> copies files and directories from the local disk into a "
+"virtual machine disk image or named libvirt domain."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:24
+msgid ""
+"You can give one of more filenames and directories on the command line. "
+"Directories are copied in recursively. The final parameter must be the "
+"destination directory in the disk image which must be an absolute path "
+"starting with a C</> character."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-in.pod:33
+#, no-wrap
+msgid ""
+" virt-copy-in -d MyGuest resolv.conf /etc\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:35 ../fish/virt-tar-in.pod:32
+msgid "Upload a home directory to a guest:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-in.pod:37
+#, no-wrap
+msgid ""
+" virt-copy-in -d MyGuest skel /home\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../fish/virt-copy-in.pod:39 ../fish/virt-copy-out.pod:28
+#: ../fish/virt-tar-in.pod:36 ../fish/virt-tar-out.pod:30
+msgid "JUST A SHELL SCRIPT WRAPPER AROUND GUESTFISH"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:41
+msgid ""
+"This command is just a simple shell script wrapper around the L<guestfish(1)"
+"> C<copy-in> command. For anything more complex than a trivial copy, you "
+"are probably better off using guestfish directly."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:47 ../fish/virt-copy-out.pod:36
+#: ../fish/virt-tar-in.pod:44 ../fish/virt-tar-out.pod:38
+msgid ""
+"Since the shell script just passes options straight to guestfish, read "
+"L<guestfish(1)> to see the full list of options."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:52
+msgid ""
+"L<guestfish(1)>, L<virt-cat(1)>, L<virt-copy-out(1)>, L<virt-edit(1)>, "
+"L<virt-tar-in(1)>, L<virt-tar-out(1)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:66 ../fish/virt-copy-out.pod:55
+#: ../fish/virt-tar-in.pod:64 ../fish/virt-tar-out.pod:57
+msgid "Copyright (C) 2011 Red Hat Inc. L<http://libguestfs.org/>"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:5
+msgid ""
+"virt-copy-out - Copy files and directories out of a virtual machine disk "
+"image."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-out.pod:9
+#, no-wrap
+msgid ""
+" virt-copy-out -a disk.img /file|dir [/file|dir ...] localdir\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-out.pod:11
+#, no-wrap
+msgid ""
+" virt-copy-out -d domain /file|dir [/file|dir ...] localdir\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:15
+msgid ""
+"C<virt-copy-out> copies files and directories out of a virtual machine disk "
+"image or named libvirt domain."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:18
+msgid ""
+"You can give one of more filenames and directories on the command line. "
+"Directories are copied out recursively."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:23
+msgid "Download the home directories from a virtual machine:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-out.pod:25
+#, no-wrap
+msgid ""
+" mkdir homes\n"
+" virt-copy-out -d MyGuest /home homes\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:30
+msgid ""
+"This command is just a simple shell script wrapper around the L<guestfish(1)"
+"> C<copy-out> command. For anything more complex than a trivial copy, you "
+"are probably better off using guestfish directly."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:41
+msgid ""
+"L<guestfish(1)>, L<virt-cat(1)>, L<virt-copy-in(1)>, L<virt-edit(1)>, L<virt-"
+"tar-in(1)>, L<virt-tar-out(1)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:5
+msgid "virt-tar-in - Unpack a tarball into a virtual machine disk image."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-in.pod:9
+#, no-wrap
+msgid ""
+" virt-tar-in -a disk.img data.tar /destination\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-in.pod:11
+#, no-wrap
+msgid ""
+" virt-tar-in -d domain data.tar /destination\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-in.pod:13
+#, no-wrap
+msgid ""
+" zcat data.tar.gz | virt-tar-in -d domain - /destination\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:17
+msgid ""
+"Using C<virt-tar-in> on live virtual machines can be dangerous, potentially "
+"causing disk corruption. The virtual machine must be shut down before you "
+"use this command."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:23
+msgid ""
+"C<virt-tar-in> unpacks an uncompressed tarball into a virtual machine disk "
+"image or named libvirt domain."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:26
+msgid ""
+"The first parameter is the tar file. Use C<-> to read the tar file from "
+"standard input. The second parameter is the absolute target directory to "
+"unpack into."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-in.pod:34
+#, no-wrap
+msgid ""
+" virt-tar-in -d MyGuest homes.tar /home\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:38
+msgid ""
+"This command is just a simple shell script wrapper around the L<guestfish(1)"
+"> C<tar-in> command. For anything more complex than a trivial copy, you are "
+"probably better off using guestfish directly."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:49
+msgid ""
+"L<guestfish(1)>, L<virt-cat(1)>, L<virt-copy-in(1)>, L<virt-copy-out(1)>, "
+"L<virt-edit(1)>, L<virt-make-fs(1)>, L<virt-tar-out(1)>, L<http://libguestfs."
+"org/>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:5
+msgid ""
+"virt-tar-out - Pack a virtual machine disk image directory into a tarball."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-out.pod:9
+#, no-wrap
+msgid ""
+" virt-tar-out -a disk.img /dir files.tar\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-out.pod:11
+#, no-wrap
+msgid ""
+" virt-tar-out -d domain /dir files.tar\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-out.pod:13
+#, no-wrap
+msgid ""
+" virt-tar-out -d domain /dir - | gzip --best > files.tar.gz\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:17
+msgid ""
+"C<virt-tar-out> packs a virtual machine disk image directory into a tarball."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:20
+msgid ""
+"The first parameter is the absolute path of the virtual machine directory. "
+"The second parameter is the tar file to write. Use C<-> to write to "
+"standard output."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:26
+msgid "Download the home directories from a guest:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-out.pod:28
+#, no-wrap
+msgid ""
+" virt-tar-out -d MyGuest /home - | gzip --best > homes.tar.gz\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:32
+msgid ""
+"This command is just a simple shell script wrapper around the L<guestfish(1)"
+"> C<tar-out> command. For anything more complex than a trivial copy, you "
+"are probably better off using guestfish directly."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:43
+msgid ""
+"L<guestfish(1)>, L<virt-cat(1)>, L<virt-copy-in(1)>, L<virt-copy-out(1)>, "
+"L<virt-edit(1)>, L<virt-tar-in(1)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:5
+msgid ""
+"guestmount - Mount a guest filesystem on the host using FUSE and libguestfs"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:9
+#, no-wrap
+msgid ""
+" guestmount [--options] -a disk.img -m device [--ro] mountpoint\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:11
+#, no-wrap
+msgid ""
+" guestmount [--options] -a disk.img -i [--ro] mountpoint\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:13
+#, no-wrap
+msgid ""
+" guestmount [--options] -d Guest -i [--ro] mountpoint\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:17
+msgid ""
+"You must I<not> use C<guestmount> in read-write mode on live virtual "
+"machines. If you do this, you risk disk corruption in the VM."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:22
+msgid ""
+"The guestmount program can be used to mount virtual machine filesystems and "
+"other disk images on the host. It uses libguestfs for access to the guest "
+"filesystem, and FUSE (the \"filesystem in userspace\") to make it appear as "
+"a mountable device."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:27
+msgid ""
+"Along with other options, you have to give at least one device (I<-a> "
+"option) or libvirt domain (I<-d> option), and at least one mountpoint (I<-m> "
+"option) or use the I<-i> inspection option or the I<--live> option. How "
+"this works is better explained in the L<guestfish(1)> manual page, or by "
+"looking at the examples below."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:33
+msgid ""
+"FUSE lets you mount filesystems as non-root. The mountpoint must be owned "
+"by you, and the filesystem will not be visible to any other users unless you "
+"make certain global configuration changes to C</etc/fuse.conf>. To unmount "
+"the filesystem, use the C<fusermount -u> command."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:41
+msgid ""
+"For a typical Windows guest which has its main filesystem on the first "
+"partition:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:44
+#, no-wrap
+msgid ""
+" guestmount -a windows.img -m /dev/sda1 --ro /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:46
+msgid ""
+"For a typical Linux guest which has a /boot filesystem on the first "
+"partition, and the root filesystem on a logical volume:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:49
+#, no-wrap
+msgid ""
+" guestmount -a linux.img -m /dev/VG/LV -m /dev/sda1:/boot --ro /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:51
+msgid "To get libguestfs to detect guest mountpoints for you:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:53
+#, no-wrap
+msgid ""
+" guestmount -a guest.img -i --ro /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:55
+msgid "For a libvirt guest called \"Guest\" you could do:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:57
+#, no-wrap
+msgid ""
+" guestmount -d Guest -i --ro /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:59
+msgid ""
+"If you don't know what filesystems are contained in a guest or disk image, "
+"use L<virt-filesystems(1)> first:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:62
+#, no-wrap
+msgid ""
+" virt-filesystems MyGuest\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:64
+msgid ""
+"If you want to trace the libguestfs calls but without excessive debugging "
+"information, we recommend:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:67
+#, no-wrap
+msgid ""
+" guestmount [...] --trace /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:69
+msgid "If you want to debug the program, we recommend:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:71
+#, no-wrap
+msgid ""
+" guestmount [...] --trace --verbose /mnt\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../fuse/guestmount.pod:73 ../rescue/virt-rescue.pod:96
+#: ../resize/virt-resize.pod:621
+msgid "NOTES"
+msgstr "ПРИМІТКИ"
+
+#. type: =head2
+#: ../fuse/guestmount.pod:75
+msgid "Other users cannot see the filesystem by default"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:77
+msgid ""
+"If you mount a filesystem as one user (eg. root), then other users will not "
+"be able to see it by default. The fix is to add the FUSE C<allow_other> "
+"option when mounting:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:81
+#, no-wrap
+msgid ""
+" sudo guestmount [...] -o allow_other /mnt\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../fuse/guestmount.pod:83
+msgid "Enabling FUSE"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:85
+msgid ""
+"On some distros, you may need to add yourself to a special group (eg. "
+"C<fuse>) before you can use any FUSE filesystem. This is necessary on "
+"Debian and derivatives."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:89
+msgid ""
+"On other distros, no special group is required. It is not necessary on "
+"Fedora or Red Hat Enterprise Linux."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:100
+msgid "Add a block device or virtual machine image."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:123
+msgid "B<--dir-cache-timeout N>"
+msgstr "B<--dir-cache-timeout N>"
+
+#. type: textblock
+#: ../fuse/guestmount.pod:125
+msgid ""
+"Set the readdir cache timeout to I<N> seconds, the default being 60 "
+"seconds. The readdir cache [actually, there are several semi-independent "
+"caches] is populated after a readdir(2) call with the stat and extended "
+"attributes of the files in the directory, in anticipation that they will be "
+"requested soon after."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:131
+msgid ""
+"There is also a different attribute cache implemented by FUSE (see the FUSE "
+"option I<-o attr_timeout>), but the FUSE cache does not anticipate future "
+"requests, only cache existing ones."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:151
+msgid ""
+"If you have untrusted raw-format guest disk images, you should use this "
+"option to specify the disk format. This avoids a possible security problem "
+"with malicious guests (CVE-2010-3851). See also L<guestfs(3)/"
+"guestfs_add_drive_opts>."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:156
+msgid "B<--fuse-help>"
+msgstr "B<--fuse-help>"
+
+#. type: textblock
+#: ../fuse/guestmount.pod:158
+msgid "Display help on special FUSE options (see I<-o> below)."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:162
+msgid "Display brief help and exit."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:186
+msgid ""
+"Mount the named partition or logical volume on the given mountpoint B<in the "
+"guest> (this has nothing to do with mountpoints in the host)."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:189
+msgid ""
+"If the mountpoint is omitted, it defaults to C</>. You have to mount "
+"something on C</>."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:206
+msgid ""
+"By default, we attempt to sync the guest disk when the FUSE mountpoint is "
+"unmounted. If you specify this option, then we don't attempt to sync the "
+"disk. See the discussion of autosync in the L<guestfs(3)> manpage."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:211
+msgid "B<-o option>"
+msgstr "B<-o параметр>"
+
+#. type: =item
+#: ../fuse/guestmount.pod:213
+msgid "B<--option option>"
+msgstr "B<--option параметр>"
+
+#. type: textblock
+#: ../fuse/guestmount.pod:215
+msgid "Pass extra options to FUSE."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:217
+msgid ""
+"To get a list of all the extra options supported by FUSE, use the command "
+"below. Note that only the FUSE I<-o> options can be passed, and only some "
+"of them are a good idea."
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:221
+#, no-wrap
+msgid ""
+" guestmount --fuse-help\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:223
+msgid "Some potentially useful FUSE options:"
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:227
+msgid "B<-o allow_other>"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:229
+msgid "Allow other users to see the filesystem."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:231
+msgid "B<-o attr_timeout=N>"
+msgstr "B<-o attr_timeout=N>"
+
+#. type: textblock
+#: ../fuse/guestmount.pod:233
+msgid "Enable attribute caching by FUSE, and set the timeout to I<N> seconds."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:235
+msgid "B<-o kernel_cache>"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:237
+msgid ""
+"Allow the kernel to cache files (reduces the number of reads that have to go "
+"through the L<guestfs(3)> API). This is generally a good idea if you can "
+"afford the extra memory usage."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:241
+msgid "B<-o uid=N> B<-o gid=N>"
+msgstr "B<-o uid=N> B<-o gid=N>"
+
+#. type: textblock
+#: ../fuse/guestmount.pod:243
+msgid ""
+"Use these options to map all UIDs and GIDs inside the guest filesystem to "
+"the chosen values."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:252
+msgid ""
+"Add devices and mount everything read-only. Also disallow writes and make "
+"the disk appear read-only to FUSE."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:255
+msgid ""
+"This is highly recommended if you are not going to edit the guest disk. If "
+"the guest is running and this option is I<not> supplied, then there is a "
+"strong risk of disk corruption in the guest. We try to prevent this from "
+"happening, but it is not always possible."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:260 ../rescue/virt-rescue.pod:199
+msgid "See also L<guestfish(1)/OPENING DISKS FOR READ AND WRITE>."
+msgstr "Див. також L<guestfish(1)/OPENING DISKS FOR READ AND WRITE>."
+
+#. type: textblock
+#: ../fuse/guestmount.pod:264
+msgid "Enable SELinux support for the guest."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:270
+msgid "Enable verbose messages from underlying libguestfs."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:276
+msgid "Display the program version and exit."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:285 ../fuse/guestmount.pod:308
+#: ../rescue/virt-rescue.pod:238 ../rescue/virt-rescue.pod:321
+msgid "See L<guestfish(1)/OPENING DISKS FOR READ AND WRITE>."
+msgstr "Див. L<guestfish(1)/OPENING DISKS FOR READ AND WRITE>."
+
+#. type: =item
+#: ../fuse/guestmount.pod:289
+msgid "B<--trace>"
+msgstr "B<--trace>"
+
+#. type: textblock
+#: ../fuse/guestmount.pod:291
+msgid "Trace libguestfs calls and entry into each FUSE function."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:293
+msgid "This also stops the daemon from forking into the background."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:319
+msgid ""
+"L<guestfish(1)>, L<virt-inspector(1)>, L<virt-cat(1)>, L<virt-edit(1)>, "
+"L<virt-tar(1)>, L<guestfs(3)>, L<http://libguestfs.org/>, L<http://fuse.sf."
+"net/>."
+msgstr ""
+"L<guestfish(1)>, L<virt-inspector(1)>, L<virt-cat(1)>, L<virt-edit(1)>, "
+"L<virt-tar(1)>, L<guestfs(3)>, L<http://libguestfs.org/>, L<http://fuse.sf."
+"net/>."
+
+#. type: textblock
+#: ../fuse/guestmount.pod:334
+msgid "Copyright (C) 2009-2010 Red Hat Inc. L<http://libguestfs.org/>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:5
+msgid ""
+"virt-inspector - Display operating system version and other information "
+"about a virtual machine"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:9
+#, no-wrap
+msgid ""
+" virt-inspector [--options] -d domname\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:11
+#, no-wrap
+msgid ""
+" virt-inspector [--options] -a disk.img [-a disk.img ...]\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:15
+#, no-wrap
+msgid ""
+" virt-inspector domname\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:17 ../inspector/virt-inspector.pod:148
+#, no-wrap
+msgid ""
+" virt-inspector disk.img [disk.img ...]\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:21
+msgid ""
+"B<virt-inspector> examines a virtual machine or disk image and tries to "
+"determine the version of the operating system and other information about "
+"the virtual machine."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:25
+msgid "Virt-inspector produces XML output for feeding into other programs."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:27
+msgid ""
+"In the normal usage, use C<virt-inspector -d domname> where C<domname> is "
+"the libvirt domain (see: C<virsh list --all>)."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:30
+msgid ""
+"You can also run virt-inspector directly on disk images from a single "
+"virtual machine. Use C<virt-inspector -a disk.img>. In rare cases a domain "
+"has several block devices, in which case you should list several I<-a> "
+"options one after another, with the first corresponding to the guest's C</"
+"dev/sda>, the second to the guest's C</dev/sdb> and so on."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:37
+msgid ""
+"You can also run virt-inspector on install disks, live CDs, bootable USB "
+"keys and similar."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:40
+msgid ""
+"Virt-inspector can only inspect and report upon I<one domain at a time>. To "
+"inspect several virtual machines, you have to run virt-inspector several "
+"times (for example, from a shell script for-loop)."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:45
+msgid ""
+"Because virt-inspector needs direct access to guest images, it won't "
+"normally work over remote libvirt connections."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:48
+msgid ""
+"All of the information available from virt-inspector is also available "
+"through the core libguestfs inspection API (see L<guestfs(3)/INSPECTION>). "
+"The same information can also be fetched using guestfish or via libguestfs "
+"bindings in many programming languages (see L<guestfs(3)/USING LIBGUESTFS "
+"WITH OTHER PROGRAMMING LANGUAGES>)."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:81
+msgid ""
+"Libvirt is only used if you specify a C<domname> on the command line. If "
+"you specify guest block devices directly (I<-a>), then libvirt is not used "
+"at all."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:94
+msgid ""
+"When prompting for keys and passphrases, virt-inspector normally turns "
+"echoing off so you cannot see what you are typing. If you are not worried "
+"about Tempest attacks and there is no one else in the room you can specify "
+"this flag to see what you are typing."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:103 ../tools/virt-list-filesystems.pl:93
+#: ../tools/virt-list-partitions.pl:94 ../tools/virt-tar.pl:143
+#: ../tools/virt-win-reg.pl:144
+msgid ""
+"Specify the format of disk images given on the command line. If this is "
+"omitted then the format is autodetected from the content of the disk image."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:107 ../tools/virt-list-filesystems.pl:97
+#: ../tools/virt-list-partitions.pl:98 ../tools/virt-tar.pl:147
+#: ../tools/virt-win-reg.pl:148
+msgid ""
+"If disk images are requested from libvirt, then this program asks libvirt "
+"for this information. In this case, the value of the format parameter is "
+"ignored."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:111 ../resize/virt-resize.pod:391
+#: ../resize/virt-resize.pod:483 ../sparsify/virt-sparsify.pod:132
+#: ../tools/virt-list-filesystems.pl:101 ../tools/virt-list-partitions.pl:102
+#: ../tools/virt-tar.pl:151 ../tools/virt-win-reg.pl:152
+msgid ""
+"If working with untrusted raw-format guest disk images, you should ensure "
+"the format is always specified."
+msgstr ""
+
+#. type: =item
+#: ../inspector/virt-inspector.pod:135
+#, fuzzy
+#| msgid "B<--parts>"
+msgid "B<--xpath> query"
+msgstr "B<--parts>"
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:137
+msgid ""
+"Perform an XPath query on the XML on stdin, and print the result on stdout. "
+"In this mode virt-inspector simply runs an XPath query; all other inspection "
+"functions are disabled. See L</XPATH QUERIES> below for some examples."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:146
+msgid "Previous versions of virt-inspector allowed you to write either:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:152
+#, no-wrap
+msgid ""
+" virt-inspector guestname\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../inspector/virt-inspector.pod:160
+msgid "XML FORMAT"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:162
+msgid ""
+"The virt-inspector XML is described precisely in a RELAX NG schema file "
+"C<virt-inspector.rng> which is supplied with libguestfs. This section is "
+"just an overview."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:166
+msgid ""
+"The top-level element is E<lt>operatingsystemsE<gt>, and it contains one or "
+"more E<lt>operatingsystemE<gt> elements. You would only see more than one "
+"E<lt>operatingsystemE<gt> element if the virtual machine is multi-boot, "
+"which is vanishingly rare in real world VMs."
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:171
+msgid "E<lt>operatingsystemE<gt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:173
+msgid ""
+"In the E<lt>operatingsystemE<gt> tag are various optional fields that "
+"describe the operating system, its architecture, the descriptive \"product "
+"name\" string, the type of OS and so on, as in this example:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:177
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" <root>/dev/sda2</root>\n"
+" <name>windows</name>\n"
+" <arch>i386</arch>\n"
+" <distro>windows</distro>\n"
+" <product_name>Windows 7 Enterprise</product_name>\n"
+" <product_variant>Client</product_variant>\n"
+" <major_version>6</major_version>\n"
+" <minor_version>1</minor_version>\n"
+" <windows_systemroot>/Windows</windows_systemroot>\n"
+" <format>installed</format>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:190
+msgid ""
+"In brief, E<lt>nameE<gt> is the class of operating system (something like "
+"C<linux> or C<windows>), E<lt>distroE<gt> is the distribution (eg. C<fedora> "
+"but many other distros are recognized) and E<lt>archE<gt> is the guest "
+"architecture. The other fields are fairly self-explanatory, but because "
+"these fields are taken directly from the libguestfs inspection API you can "
+"find precise information from L<guestfs(3)/INSPECTION>."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:198
+msgid ""
+"The E<lt>rootE<gt> element is the root filesystem device, but from the point "
+"of view of libguestfs (block devices may have completely different names "
+"inside the VM itself)."
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:202
+msgid "E<lt>mountpointsE<gt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:204
+msgid ""
+"Un*x-like guests typically have multiple filesystems which are mounted at "
+"various mountpoints, and these are described in the E<lt>mountpointsE<gt> "
+"element which looks like this:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:208
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" ...\n"
+" <mountpoints>\n"
+" <mountpoint dev=\"/dev/vg_f13x64/lv_root\">/</mountpoint>\n"
+" <mountpoint dev=\"/dev/sda1\">/boot</mountpoint>\n"
+" </mountpoints>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:216
+msgid ""
+"As with E<lt>rootE<gt>, devices are from the point of view of libguestfs, "
+"and may have completely different names inside the guest. Only mountable "
+"filesystems appear in this list, not things like swap devices."
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:221
+msgid "E<lt>filesystemsE<gt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:223
+msgid ""
+"E<lt>filesystemsE<gt> is like E<lt>mountpointsE<gt> but covers I<all> "
+"filesystems belonging to the guest, including swap and empty partitions. "
+"(In the rare case of a multi-boot guest, it covers filesystems belonging to "
+"this OS or shared with this OS and other OSes)."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:229
+msgid "You might see something like this:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:231
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" ...\n"
+" <filesystems>\n"
+" <filesystem dev=\"/dev/vg_f13x64/lv_root\">\n"
+" <type>ext4</type>\n"
+" <label>Fedora-13-x86_64</label>\n"
+" <uuid>e6a4db1e-15c2-477b-ac2a-699181c396aa</uuid>\n"
+" </filesystem>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:241
+msgid ""
+"The optional elements within E<lt>filesystemE<gt> are the filesystem type, "
+"the label, and the UUID."
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:244
+msgid "E<lt>applicationsE<gt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:246
+msgid ""
+"The related elements E<lt>package_formatE<gt>, E<lt>package_managementE<gt> "
+"and E<lt>applicationsE<gt> describe applications installed in the virtual "
+"machine."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:250
+msgid ""
+"E<lt>package_formatE<gt>, if present, describes the packaging system used. "
+"Typical values would be C<rpm> and C<deb>."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:253
+msgid ""
+"E<lt>package_managementE<gt>, if present, describes the package manager. "
+"Typical values include C<yum>, C<up2date> and C<apt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:256
+msgid "E<lt>applicationsE<gt> lists the packages or applications installed."
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:259
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" ...\n"
+" <applications>\n"
+" <application>\n"
+" <name>coreutils</name>\n"
+" <version>8.5</version>\n"
+" <release>1</release>\n"
+" </application>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:269
+msgid ""
+"The version and release fields may not be available for some types guests. "
+"Other fields are possible, see L<guestfs(3)/"
+"guestfs_inspect_list_applications>."
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:273
+msgid "E<lt>drive_mappingsE<gt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:275
+msgid ""
+"For operating systems like Windows which use drive letters, virt-inspector "
+"is able to find out how drive letters map to filesystems."
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:279
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" ...\n"
+" <drive_mappings>\n"
+" <drive_mapping name=\"C\">/dev/sda2</drive_mapping>\n"
+" <drive_mapping name=\"E\">/dev/sdb1</drive_mapping>\n"
+" </drive_mappings>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:287
+msgid ""
+"In the example above, drive C maps to the filesystem on the second partition "
+"on the first disk, and drive E maps to the filesystem on the first partition "
+"on the second disk."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:291
+msgid ""
+"Note that this only covers permanent local filesystem mappings, not things "
+"like network shares. Furthermore NTFS volume mount points may not be listed "
+"here."
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:295
+msgid "E<lt>iconE<gt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:297
+msgid ""
+"Virt-inspector is sometimes able to extract an icon or logo for the guest. "
+"The icon is returned as base64-encoded PNG data. Note that the icon can be "
+"very large and high quality."
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:301
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" ...\n"
+" <icon>\n"
+" iVBORw0KGgoAAAANSUhEUgAAAGAAAABg[.......]\n"
+" [... many lines of base64 data ...]\n"
+" </icon>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:309
+msgid ""
+"To display the icon, you have to extract it and convert the base64 data back "
+"to a binary file. Use an XPath query or simply an editor to extract the "
+"data, then use the coreutils L<base64(1)> program to do the conversion back "
+"to a PNG file:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:314
+#, no-wrap
+msgid ""
+" base64 -i -d < icon.data > icon.png\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:316
+msgid "INSPECTING INSTALL DISKS, LIVE CDs"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:318
+msgid ""
+"Virt-inspector can detect some operating system installers on install disks, "
+"live CDs, bootable USB keys and more."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:321
+msgid ""
+"In this case the E<lt>formatE<gt> tag will contain C<installer> and other "
+"fields may be present to indicate a live CD, network installer, or one part "
+"of a multipart CD. For example:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:325
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" <root>/dev/sda</root>\n"
+" <name>linux</name>\n"
+" <arch>i386</arch>\n"
+" <distro>ubuntu</distro>\n"
+" <product_name>Ubuntu 10.10 "Maverick Meerkat"</product_name>\n"
+" <major_version>10</major_version>\n"
+" <minor_version>10</minor_version>\n"
+" <format>installer</format>\n"
+" <live/>\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../inspector/virt-inspector.pod:337
+msgid "XPATH QUERIES"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:339
+msgid ""
+"Virt-inspector includes built in support for running XPath queries. The "
+"reason for including XPath support directly in virt-inspector is simply that "
+"there are no good and widely available command line programs that can do "
+"XPath queries. The only good one is L<xmlstarlet(1)> and that is not "
+"available on Red Hat Enterprise Linux."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:346
+msgid ""
+"To perform an XPath query, use the I<--xpath> option. Note that in this "
+"mode, virt-inspector simply reads XML from stdin and outputs the query "
+"result on stdout. All other inspection features are disabled in this mode."
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:353
+#, no-wrap
+msgid ""
+" $ virt-inspector -d Guest | virt-inspector --xpath '//filesystems'\n"
+" <filesystems>\n"
+" <filesystem dev=\"/dev/vg_f13x64/lv_root\">\n"
+" <type>ext4</type>\n"
+" [...]\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:359
+#, no-wrap
+msgid ""
+" $ virt-inspector -d Guest | \\\n"
+" virt-inspector --xpath \"string(//filesystem[@dev='/dev/sda1']/type)\"\n"
+" ext4\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:363
+#, no-wrap
+msgid ""
+" $ virt-inspector -d Guest | \\\n"
+" virt-inspector --xpath 'string(//icon)' | base64 -i -d | display -\n"
+" [displays the guest icon, if there is one]\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../inspector/virt-inspector.pod:374
+msgid "OLD VERSIONS OF VIRT-INSPECTOR"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:376
+msgid ""
+"Early versions of libguestfs shipped with a different virt-inspector program "
+"written in Perl (the current version is written in C). The XML output of "
+"the Perl virt-inspector was different and it could also output in other "
+"formats like text."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:381
+msgid ""
+"The old virt-inspector is no longer supported or shipped with libguestfs."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:384
+msgid ""
+"To confuse matters further, in Red Hat Enterprise Linux 6 we ship two "
+"versions of virt-inspector with different names:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:387
+#, no-wrap
+msgid ""
+" virt-inspector Old Perl version.\n"
+" virt-inspector2 New C version.\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:397
+msgid ""
+"L<guestfs(3)>, L<guestfish(1)>, L<http://www.w3.org/TR/xpath/>, L<base64(1)"
+">, L<xmlstarlet(1)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:414
+msgid "Matthew Booth L<mbooth@redhat.com>"
+msgstr ""
+
+#. type: textblock
+#: ../java/examples/guestfs-java.pod:5
+msgid "guestfs-java - How to use libguestfs from Java"
+msgstr ""
+
+#. type: verbatim
+#: ../java/examples/guestfs-java.pod:9
+#, no-wrap
+msgid ""
+" import com.redhat.et.libguestfs.*;\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../java/examples/guestfs-java.pod:11
+#, no-wrap
+msgid ""
+" GuestFS g = new GuestFS ();\n"
+" g.add_drive_opts (\"disk.img\", null);\n"
+" g.launch ();\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../java/examples/guestfs-java.pod:17
+msgid ""
+"This manual page documents how to call libguestfs from the Java programming "
+"language. This page just documents the differences from the C API and gives "
+"some examples. If you are not familiar with using libguestfs, you also need "
+"to read L<guestfs(3)>."
+msgstr ""
+
+#. type: =head2
+#: ../java/examples/guestfs-java.pod:22 ../ocaml/examples/guestfs-ocaml.pod:53
+msgid "CLOSING THE HANDLE"
+msgstr ""
+
+#. type: textblock
+#: ../java/examples/guestfs-java.pod:24
+msgid ""
+"The handle is closed when it is reaped by the garbage collector. Because "
+"libguestfs handles include a lot of state, it is also possible to close (and "
+"hence free) them explicitly by calling the C<close> method."
+msgstr ""
+
+#. type: =head2
+#: ../java/examples/guestfs-java.pod:29 ../ocaml/examples/guestfs-ocaml.pod:60
+#: ../python/examples/guestfs-python.pod:21
+#: ../ruby/examples/guestfs-ruby.pod:22
+msgid "EXCEPTIONS"
+msgstr "ВИНЯТКИ"
+
+#. type: textblock
+#: ../java/examples/guestfs-java.pod:31
+msgid ""
+"Errors from libguestfs functions are mapped into the C<LibGuestFSException> "
+"exception. This has a single parameter which is the error message (a "
+"C<String>)."
+msgstr ""
+
+#. type: textblock
+#: ../java/examples/guestfs-java.pod:35
+msgid "Calling any method on a closed handle raises the same exception."
+msgstr ""
+
+#. type: textblock
+#: ../java/examples/guestfs-java.pod:47
+msgid ""
+"L<guestfs(3)>, L<guestfs-examples(3)>, L<guestfs-erlang(3)>, L<guestfs-ocaml"
+"(3)>, L<guestfs-perl(3)>, L<guestfs-python(3)>, L<guestfs-recipes(1)>, "
+"L<guestfs-ruby(3)>, L<http://libguestfs.org/>, L<http://caml.inria.fr/>."
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:5
+msgid "guestfs-ocaml - How to use libguestfs from OCaml"
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:9
+msgid "Module style:"
+msgstr ""
+
+#. type: verbatim
+#: ../ocaml/examples/guestfs-ocaml.pod:11
+#, no-wrap
+msgid ""
+" let g = Guestfs.create () in\n"
+" Guestfs.add_drive_opts g ~format:\"raw\" ~readonly:true \"disk.img\";\n"
+" Guestfs.launch g;\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:15
+msgid "Object-oriented style:"
+msgstr ""
+
+#. type: verbatim
+#: ../ocaml/examples/guestfs-ocaml.pod:17
+#, no-wrap
+msgid ""
+" let g = new Guestfs.guestfs () in\n"
+" g#add_drive_opts ~format:\"raw\" ~readonly:true \"disk.img\";\n"
+" g#launch ();\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../ocaml/examples/guestfs-ocaml.pod:21
+#, no-wrap
+msgid ""
+" ocamlfind opt prog.ml -package guestfs -linkpkg -o prog\n"
+"or:\n"
+" ocamlopt -I +guestfs mlguestfs.cmxa prog.ml -o prog\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:27
+msgid ""
+"This manual page documents how to call libguestfs from the OCaml programming "
+"language. This page just documents the differences from the C API and gives "
+"some examples. If you are not familiar with using libguestfs, you also need "
+"to read L<guestfs(3)>."
+msgstr ""
+
+#. type: =head2
+#: ../ocaml/examples/guestfs-ocaml.pod:32
+msgid "PROGRAMMING STYLES"
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:34
+msgid ""
+"There are two different programming styles supported by the OCaml bindings. "
+"You can use a module style, with each C function mapped to an OCaml function:"
+msgstr ""
+
+#. type: verbatim
+#: ../ocaml/examples/guestfs-ocaml.pod:38
+#, no-wrap
+msgid ""
+" int guestfs_set_verbose (guestfs_h *g, int flag);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:40
+msgid "becomes:"
+msgstr ""
+
+#. type: verbatim
+#: ../ocaml/examples/guestfs-ocaml.pod:42
+#, no-wrap
+msgid ""
+" val Guestfs.set_verbose : Guestfs.t -> bool -> unit\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:44
+msgid ""
+"Alternately you can use an object-oriented style, calling methods on the "
+"class C<Guestfs.guestfs>:"
+msgstr ""
+
+#. type: verbatim
+#: ../ocaml/examples/guestfs-ocaml.pod:47
+#, no-wrap
+msgid ""
+" method set_verbose : bool -> unit\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:49
+msgid ""
+"The object-oriented style is usually briefer, and the minor performance "
+"penalty isn't noticable in the general overhead of performing libguestfs "
+"functions."
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:55
+msgid ""
+"The handle is closed when it is reaped by the garbage collector. Because "
+"libguestfs handles include a lot of state, it is also possible to close (and "
+"hence free) them explicitly by calling C<Guestfs.close> or the C<#close> "
+"method."
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:62
+msgid ""
+"Errors from libguestfs functions are mapped into the C<Guestfs.Error> "
+"exception. This has a single parameter which is the error message (a "
+"string)."
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:66
+msgid ""
+"Calling any function/method on a closed handle raises C<Guestfs."
+"Handle_closed>. The single parameter is the name of the function that you "
+"called."
+msgstr ""
+
+#. type: textblock
+#: ../ocaml/examples/guestfs-ocaml.pod:80
+msgid ""
+"L<guestfs(3)>, L<guestfs-examples(3)>, L<guestfs-erlang(3)>, L<guestfs-java"
+"(3)>, L<guestfs-perl(3)>, L<guestfs-python(3)>, L<guestfs-recipes(1)>, "
+"L<guestfs-ruby(3)>, L<http://libguestfs.org/>, L<http://caml.inria.fr/>."
+msgstr ""
+
+#. type: textblock
+#: ../perl/examples/guestfs-perl.pod:5
+msgid "guestfs-perl - How to use libguestfs from Perl"
+msgstr ""
+
+#. type: verbatim
+#: ../perl/examples/guestfs-perl.pod:9
+#, no-wrap
+msgid ""
+" use Sys::Guestfs;\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../perl/examples/guestfs-perl.pod:11
+#, no-wrap
+msgid ""
+" my $h = Sys::Guestfs->new ();\n"
+" $h->add_drive_opts ('guest.img', format => 'raw');\n"
+" $h->launch ();\n"
+" $h->mount_options ('', '/dev/sda1', '/');\n"
+" $h->touch ('/hello');\n"
+" $h->sync ();\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../perl/examples/guestfs-perl.pod:20
+msgid ""
+"This manual page documents how to call libguestfs from the Perl programming "
+"language. This page just documents the differences from the C API and gives "
+"some examples. If you are not familiar with using libguestfs, you also need "
+"to read L<guestfs(3)>. To read the full Perl API, see L<Sys::Guestfs(3)>."
+msgstr ""
+
+#. type: =head2
+#: ../perl/examples/guestfs-perl.pod:26
+msgid "ERRORS"
+msgstr "ПОМИЛКИ"
+
+#. type: textblock
+#: ../perl/examples/guestfs-perl.pod:28
+msgid ""
+"Errors from libguestfs functions turn into calls to C<croak> (see L<Carp(3)"
+">)."
+msgstr ""
+
+#. type: textblock
+#: ../perl/examples/guestfs-perl.pod:41
+msgid ""
+"L<Sys::Guestfs(3)>, L<guestfs(3)>, L<guestfs-examples(3)>, L<guestfs-erlang"
+"(3)>, L<guestfs-java(3)>, L<guestfs-ocaml(3)>, L<guestfs-python(3)>, "
+"L<guestfs-recipes(1)>, L<guestfs-ruby(3)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../python/examples/guestfs-python.pod:5
+msgid "guestfs-python - How to use libguestfs from Python"
+msgstr ""
+
+#. type: verbatim
+#: ../python/examples/guestfs-python.pod:9
+#, no-wrap
+msgid ""
+" import guestfs\n"
+" g = guestfs.GuestFS ()\n"
+" g.add_drive_opts (\"disk.img\", format=\"raw\", readonly=1)\n"
+" g.launch\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../python/examples/guestfs-python.pod:16
+msgid ""
+"This manual page documents how to call libguestfs from the Python "
+"programming language. This page just documents the differences from the C "
+"API and gives some examples. If you are not familiar with using libguestfs, "
+"you also need to read L<guestfs(3)>."
+msgstr ""
+
+#. type: textblock
+#: ../python/examples/guestfs-python.pod:23
+msgid ""
+"Errors from libguestfs functions are mapped into C<RuntimeException> with a "
+"single string argument which is the error message."
+msgstr ""
+
+#. type: =head2
+#: ../python/examples/guestfs-python.pod:26
+msgid "MORE DOCUMENTATION"
+msgstr ""
+
+#. type: textblock
+#: ../python/examples/guestfs-python.pod:28
+msgid "Type:"
+msgstr "Тип:"
+
+#. type: verbatim
+#: ../python/examples/guestfs-python.pod:30
+#, no-wrap
+msgid ""
+" $ python\n"
+" >>> import guestfs\n"
+" >>> help (guestfs)\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../python/examples/guestfs-python.pod:44
+msgid ""
+"L<guestfs(3)>, L<guestfs-examples(3)>, L<guestfs-erlang(3)>, L<guestfs-java"
+"(3)>, L<guestfs-ocaml(3)>, L<guestfs-perl(3)>, L<guestfs-recipes(1)>, "
+"L<guestfs-ruby(3)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:5
+msgid "virt-rescue - Run a rescue shell on a virtual machine"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:9
+#, no-wrap
+msgid ""
+" virt-rescue [--options] -d domname\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:11
+#, no-wrap
+msgid ""
+" virt-rescue [--options] -a disk.img [-a disk.img ...]\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:13
+#, fuzzy, no-wrap
+#| msgid ""
+#| " virt-filesystems --format=raw -a disk.img\n"
+#| "\n"
+msgid ""
+" virt-rescue --suggest (-d domname | -a disk.img ...)\n"
+"\n"
+msgstr ""
+" virt-filesystems --format=raw -a диск.img\n"
+"\n"
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:17
+#, no-wrap
+msgid ""
+" virt-rescue [--options] domname\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:19
+#, no-wrap
+msgid ""
+" virt-rescue [--options] disk.img [disk.img ...]\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:23
+msgid ""
+"You must I<not> use C<virt-rescue> on live virtual machines. Doing so will "
+"probably result in disk corruption in the VM. C<virt-rescue> tries to stop "
+"you from doing this, but doesn't catch all cases."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:27
+msgid ""
+"However if you use the I<--ro> (read only) option, then you can attach a "
+"shell to a live virtual machine. The results might be strange or "
+"inconsistent at times but you won't get disk corruption."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:33
+msgid ""
+"virt-rescue is like a Rescue CD, but for virtual machines, and without the "
+"need for a CD. virt-rescue gives you a rescue shell and some simple "
+"recovery tools which you can use to examine or rescue a virtual machine or "
+"disk image."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:38
+msgid ""
+"You can run virt-rescue on any virtual machine known to libvirt, or directly "
+"on disk image(s):"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:41
+#, no-wrap
+msgid ""
+" virt-rescue -d GuestName\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:43
+#, no-wrap
+msgid ""
+" virt-rescue --ro -a /path/to/disk.img\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:45
+#, no-wrap
+msgid ""
+" virt-rescue -a /dev/sdc\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:47
+msgid "For live VMs you I<must> use the --ro option."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:49
+msgid ""
+"When you run virt-rescue on a virtual machine or disk image, you are placed "
+"in an interactive bash shell where you can use many ordinary Linux "
+"commands. What you see in C</> (C</bin>, C</lib> etc) is the rescue "
+"appliance. You must mount the virtual machine's filesystems by hand. There "
+"is an empty directory called C</sysroot> where you can mount filesystems."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:56
+msgid ""
+"You can get virt-rescue to suggest mount commands for you by using the I<--"
+"suggest> option (in another terminal):"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:59
+#, no-wrap
+msgid ""
+" $ virt-rescue --suggest -d Fedora15\n"
+" Inspecting the virtual machine or disk image ...\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:62
+#, no-wrap
+msgid ""
+" This disk contains one or more operating systems. You can use these\n"
+" mount commands in virt-rescue (at the ><rescue> prompt) to mount the\n"
+" filesystems.\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:66
+#, no-wrap
+msgid ""
+" # /dev/vg_f15x32/lv_root is the root of a linux operating system\n"
+" # type: linux, distro: fedora, version: 15.0\n"
+" # Fedora release 15 (Lovelock)\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:70
+#, no-wrap
+msgid ""
+" mount /dev/vg_f15x32/lv_root /sysroot/\n"
+" mount /dev/vda1 /sysroot/boot\n"
+" mount --bind /dev /sysroot/dev\n"
+" mount --bind /dev/pts /sysroot/dev/pts\n"
+" mount --bind /proc /sysroot/proc\n"
+" mount --bind /sys /sysroot/sys\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:77
+msgid ""
+"Another way is to list the logical volumes (with L<lvs(8)>) and partitions "
+"(with L<parted(8)>) and mount them by hand:"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:80
+#, no-wrap
+msgid ""
+" ><rescue> lvs\n"
+" LV VG Attr LSize Origin Snap% Move Log Copy% Convert\n"
+" lv_root vg_f15x32 -wi-a- 8.83G\n"
+" lv_swap vg_f15x32 -wi-a- 992.00M\n"
+" ><rescue> mount /dev/vg_f15x32/lv_root /sysroot\n"
+" ><rescue> mount /dev/vda1 /sysroot/boot\n"
+" ><rescue> ls /sysroot\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:88
+msgid ""
+"Another command to list available filesystems is L<virt-filesystems(1)>."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:91
+msgid ""
+"To run commands in a Linux guest (for example, grub), you should chroot into "
+"the /sysroot directory first:"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:94
+#, no-wrap
+msgid ""
+" ><rescue> chroot /sysroot\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:98
+msgid ""
+"Virt-rescue can be used on I<any> disk image file or device, not just a "
+"virtual machine. For example you can use it on a blank file if you want to "
+"partition that file (although we would recommend using L<guestfish(1)> "
+"instead as it is more suitable for this purpose). You can even use virt-"
+"rescue on things like SD cards."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:104
+msgid ""
+"Virt-rescue does not require root. You only need to run it as root if you "
+"need root to open the disk image."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:107
+msgid ""
+"This tool is just designed for quick interactive hacking on a virtual "
+"machine. For more structured access to a virtual machine disk image, you "
+"should use L<guestfs(3)>. To get a structured shell that you can use to "
+"make scripted changes to guests, use L<guestfish(1)>."
+msgstr ""
+
+#. type: =item
+#: ../rescue/virt-rescue.pod:131
+msgid "B<--append kernelopts>"
+msgstr "B<--append параметри_ядра>"
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:133
+msgid "Pass additional options to the rescue kernel."
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:163
+#, no-wrap
+msgid ""
+" virt-rescue --format=raw -a disk.img\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:167
+#, no-wrap
+msgid ""
+" virt-rescue --format=raw -a disk.img --format -a another.img\n"
+"\n"
+msgstr ""
+
+#. type: =item
+#: ../rescue/virt-rescue.pod:176
+msgid "B<-m MB>"
+msgstr "B<-m МБ>"
+
+#. type: =item
+#: ../rescue/virt-rescue.pod:178
+msgid "B<--memsize MB>"
+msgstr "B<--memsize МБ>"
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:180
+msgid ""
+"Change the amount of memory allocated to the rescue system. The default is "
+"set by libguestfs and is small but adequate for running system tools. The "
+"occasional program might need more memory. The parameter is specified in "
+"megabytes."
+msgstr ""
+
+#. type: =item
+#: ../rescue/virt-rescue.pod:185
+msgid "B<--network>"
+msgstr "B<--network>"
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:187
+msgid "Enable QEMU user networking in the guest. See L</NETWORK>."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:193
+msgid "Open the image read-only."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:203
+msgid ""
+"Enable SELinux in the rescue appliance. You should read L<guestfs(3)/"
+"SELINUX> before using this option."
+msgstr ""
+
+#. type: =item
+#: ../rescue/virt-rescue.pod:206
+msgid "B<--smp> N"
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:208
+msgid "Enable N E<ge> 2 virtual CPUs in the rescue appliance."
+msgstr ""
+
+#. type: =item
+#: ../rescue/virt-rescue.pod:210
+#, fuzzy
+#| msgid "B<--quiet>"
+msgid "B<--suggest>"
+msgstr "B<--quiet>"
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:212
+msgid ""
+"Inspect the disk image and suggest what mount commands should be used to "
+"mount the disks. You should use the I<--suggest> option in a second "
+"terminal, then paste the commands into another virt-rescue."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:216
+msgid ""
+"This option implies I<--ro> and is safe to use even if the guest is up or if "
+"another virt-rescue is running."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:235
+msgid ""
+"This changes the I<-a> and I<-d> options so that disks are added and mounts "
+"are done read-write."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:248
+msgid "Previous versions of virt-rescue allowed you to write either:"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:250
+#, no-wrap
+msgid ""
+" virt-rescue disk.img [disk.img ...]\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:254
+#, no-wrap
+msgid ""
+" virt-rescue guestname\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../rescue/virt-rescue.pod:262
+msgid "NETWORK"
+msgstr "МЕРЕЖА"
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:264
+msgid ""
+"Adding the I<--network> option enables QEMU user networking in the rescue "
+"appliance. There are some differences between user networking and ordinary "
+"networking:"
+msgstr ""
+
+#. type: =item
+#: ../rescue/virt-rescue.pod:270
+msgid "ping does not work"
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:272
+msgid ""
+"Because the ICMP ECHO_REQUEST protocol generally requires root in order to "
+"send the ping packets, and because virt-rescue must be able to run as non-"
+"root, QEMU user networking is not able to emulate the L<ping(8)> command. "
+"The ping command will appear to resolve addresses but will not be able to "
+"send or receive any packets. This does not mean that the network is not "
+"working."
+msgstr ""
+
+#. type: =item
+#: ../rescue/virt-rescue.pod:279
+msgid "cannot receive connections"
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:281
+msgid "QEMU user networking cannot receive incoming connections."
+msgstr ""
+
+#. type: =item
+#: ../rescue/virt-rescue.pod:283
+msgid "making TCP connections"
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:285
+msgid ""
+"The virt-rescue appliance needs to be small and so does not include many "
+"network tools. In particular there is no L<telnet(1)> command. You can "
+"make TCP connections from the shell using the magical C</dev/tcp/"
+"E<lt>hostnameE<gt>/E<lt>portE<gt>> syntax:"
+msgstr ""
+
+#. type: verbatim
+#: ../rescue/virt-rescue.pod:290
+#, no-wrap
+msgid ""
+" exec 3<>/dev/tcp/redhat.com/80\n"
+" echo \"GET /\" >&3\n"
+" cat <&3\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:294
+msgid "See L<bash(1)> for more details."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:300
+msgid ""
+"Several environment variables affect virt-rescue. See L<guestfs(3)/"
+"ENVIRONMENT VARIABLES> for the complete list."
+msgstr ""
+
+#. type: textblock
+#: ../rescue/virt-rescue.pod:327
+#, fuzzy
+#| msgid ""
+#| "L<guestfs(3)>, L<guestfish(1)>, L<virt-copy-out(1)>, L<virt-edit(1)>, "
+#| "L<virt-tar-out(1)>, L<http://libguestfs.org/>."
+msgid ""
+"L<guestfs(3)>, L<guestfish(1)>, L<virt-cat(1)>, L<virt-edit(1)>, L<virt-"
+"filesystems(1)>, L<http://libguestfs.org/>."
+msgstr ""
+"L<guestfs(3)>, L<guestfish(1)>, L<virt-copy-out(1)>, L<virt-edit(1)>, L<virt-"
+"tar-out(1)>, L<http://libguestfs.org/>."
+
+#. type: textblock
+#: ../resize/virt-resize.pod:5
+msgid "virt-resize - Resize a virtual machine disk"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:9
+#, no-wrap
+msgid ""
+" virt-resize [--resize /dev/sdaN=[+/-]<size>[%]]\n"
+" [--expand /dev/sdaN] [--shrink /dev/sdaN]\n"
+" [--ignore /dev/sdaN] [--delete /dev/sdaN] [...] indisk outdisk\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:15
+msgid ""
+"Virt-resize is a tool which can resize a virtual machine disk, making it "
+"larger or smaller overall, and resizing or deleting any partitions contained "
+"within."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:19
+msgid ""
+"Virt-resize B<cannot> resize disk images in-place. Virt-resize B<should "
+"not> be used on live virtual machines - for consistent results, shut the "
+"virtual machine down before resizing it."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:23
+msgid ""
+"If you are not familiar with the associated tools: L<virt-filesystems(1)> "
+"and L<virt-df(1)>, we recommend you go and read those manual pages first."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:31 ../resize/virt-resize.pod:597
+#: ../sparsify/virt-sparsify.pod:203 ../src/guestfs.pod:484
+#: ../src/guestfs.pod:1302 ../src/guestfs.pod:1441 ../src/guestfs.pod:2690
+msgid "1."
+msgstr "1."
+
+#. type: textblock
+#: ../resize/virt-resize.pod:33
+msgid ""
+"Copy C<olddisk> to C<newdisk>, extending one of the guest's partitions to "
+"fill the extra 5GB of space."
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:36
+#, no-wrap
+msgid ""
+" virt-filesystems --long -h --all -a olddisk\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:38
+#, no-wrap
+msgid ""
+" truncate -r olddisk newdisk\n"
+" truncate -s +5G newdisk\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:41
+#, no-wrap
+msgid ""
+" # Note \"/dev/sda2\" is a partition inside the \"olddisk\" file.\n"
+" virt-resize --expand /dev/sda2 olddisk newdisk\n"
+"\n"
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:44 ../resize/virt-resize.pod:604
+#: ../sparsify/virt-sparsify.pod:210 ../src/guestfs.pod:490
+#: ../src/guestfs.pod:1306 ../src/guestfs.pod:1445 ../src/guestfs.pod:2715
+msgid "2."
+msgstr "2."
+
+#. type: textblock
+#: ../resize/virt-resize.pod:46
+msgid ""
+"As above, but make the /boot partition 200MB bigger, while giving the "
+"remaining space to /dev/sda2:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:49
+#, no-wrap
+msgid ""
+" virt-resize --resize /dev/sda1=+200M --expand /dev/sda2 \\\n"
+" olddisk newdisk\n"
+"\n"
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:52 ../resize/virt-resize.pod:610
+#: ../sparsify/virt-sparsify.pod:216 ../src/guestfs.pod:501
+#: ../src/guestfs.pod:1451
+msgid "3."
+msgstr "3."
+
+#. type: textblock
+#: ../resize/virt-resize.pod:54
+msgid ""
+"As in the first example, but expand a logical volume as the final step. "
+"This is what you would typically use for Linux guests that use LVM:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:58
+#, no-wrap
+msgid ""
+" virt-resize --expand /dev/sda2 --LV-expand /dev/vg_guest/lv_root \\\n"
+" olddisk newdisk\n"
+"\n"
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:61
+msgid "4."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:63
+msgid ""
+"As in the first example, but the output format will be qcow2 instead of a "
+"raw disk:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:66
+#, no-wrap
+msgid ""
+" qemu-img create -f qcow2 newdisk.qcow2 15G\n"
+" virt-resize --expand /dev/sda2 olddisk newdisk.qcow2\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../resize/virt-resize.pod:71
+msgid "DETAILED USAGE"
+msgstr "ДОКЛАДНІШЕ ЩОДО ВИКОРИСТАННЯ"
+
+#. type: =head2
+#: ../resize/virt-resize.pod:73
+msgid "EXPANDING A VIRTUAL MACHINE DISK"
+msgstr "РОЗШИРЕННЯ ДИСКА ВІРТУАЛЬНОЇ МАШИНИ"
+
+#. type: =item
+#: ../resize/virt-resize.pod:77
+msgid "1. Shut down the virtual machine"
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:79
+msgid "2. Locate input disk image"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:81
+msgid ""
+"Locate the input disk image (ie. the file or device on the host containing "
+"the guest's disk). If the guest is managed by libvirt, you can use C<virsh "
+"dumpxml> like this to find the disk image name:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:85
+#, no-wrap
+msgid ""
+" # virsh dumpxml guestname | xpath /domain/devices/disk/source\n"
+" Found 1 nodes:\n"
+" -- NODE --\n"
+" <source dev=\"/dev/vg/lv_guest\" />\n"
+"\n"
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:90
+msgid "3. Look at current sizing"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:92
+msgid "Use L<virt-filesystems(1)> to display the current partitions and sizes:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:95
+#, no-wrap
+msgid ""
+" # virt-filesystems --long --parts --blkdevs -h -a /dev/vg/lv_guest\n"
+" Name Type Size Parent\n"
+" /dev/sda1 partition 101M /dev/sda\n"
+" /dev/sda2 partition 7.9G /dev/sda\n"
+" /dev/sda device 8.0G -\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:101
+msgid ""
+"(This example is a virtual machine with an 8 GB disk which we would like to "
+"expand up to 10 GB)."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:104
+msgid "4. Create output disk"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:106
+msgid ""
+"Virt-resize cannot do in-place disk modifications. You have to have space "
+"to store the resized output disk."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:109
+msgid ""
+"To store the resized disk image in a file, create a file of a suitable size:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:112
+#, no-wrap
+msgid ""
+" # rm -f outdisk\n"
+" # truncate -s 10G outdisk\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:115
+msgid "Or use L<lvcreate(1)> to create a logical volume:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:117
+#, no-wrap
+msgid ""
+" # lvcreate -L 10G -n lv_name vg_name\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:119
+msgid "Or use L<virsh(1)> vol-create-as to create a libvirt storage volume:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:121
+#, no-wrap
+msgid ""
+" # virsh pool-list\n"
+" # virsh vol-create-as poolname newvol 10G\n"
+"\n"
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:124
+msgid "5. Resize"
+msgstr "5. Зміна розміру"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:126
+msgid ""
+"virt-resize takes two mandatory parameters, the input disk (eg. device or "
+"file) and the output disk. The output disk is the one created in the "
+"previous step."
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:130
+#, no-wrap
+msgid ""
+" # virt-resize indisk outdisk\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:132
+msgid ""
+"This command just copies disk image C<indisk> to disk image C<outdisk> "
+"I<without> resizing or changing any existing partitions. If C<outdisk> is "
+"larger, then an extra, empty partition is created at the end of the disk "
+"covering the extra space. If C<outdisk> is smaller, then it will give an "
+"error."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:138
+msgid ""
+"More realistically you'd want to expand existing partitions in the disk "
+"image by passing extra options (for the full list see the L</OPTIONS> "
+"section below)."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:142
+msgid ""
+"L</--expand> is the most useful option. It expands the named partition "
+"within the disk to fill any extra space:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:145
+#, no-wrap
+msgid ""
+" # virt-resize --expand /dev/sda2 indisk outdisk\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:147
+msgid ""
+"(In this case, an extra partition is I<not> created at the end of the disk, "
+"because there will be no unused space)."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:150
+msgid ""
+"L</--resize> is the other commonly used option. The following would "
+"increase the size of /dev/sda1 by 200M, and expand /dev/sda2 to fill the "
+"rest of the available space:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:154
+#, no-wrap
+msgid ""
+" # virt-resize --resize /dev/sda1=+200M --expand /dev/sda2 \\\n"
+" indisk outdisk\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:157
+msgid ""
+"If the expanded partition in the image contains a filesystem or LVM PV, then "
+"if virt-resize knows how, it will resize the contents, the equivalent of "
+"calling a command such as L<pvresize(8)>, L<resize2fs(8)>, L<ntfsresize(8)> "
+"or L<btrfs(8)>. However virt-resize does not know how to resize some "
+"filesystems, so you would have to online resize them after booting the guest."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:164
+msgid "Other options are covered below."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:166
+msgid "6. Test"
+msgstr "6. Перевірка"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:168
+msgid "Thoroughly test the new disk image I<before> discarding the old one."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:170
+msgid "If you are using libvirt, edit the XML to point at the new disk:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:172
+#, no-wrap
+msgid ""
+" # virsh edit guestname\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:174
+msgid ""
+"Change E<lt>source ...E<gt>, see L<http://libvirt.org/formatdomain."
+"html#elementsDisks>"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:177
+msgid "Then start up the domain with the new, resized disk:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:179
+#, no-wrap
+msgid ""
+" # virsh start guestname\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:181
+msgid ""
+"and check that it still works. See also the L</NOTES> section below for "
+"additional information."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:184
+msgid "7. Resize LVs etc inside the guest"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:186
+msgid "(This can also be done offline using L<guestfish(1)>)"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:188
+msgid ""
+"Once the guest has booted you should see the new space available, at least "
+"for filesystems that virt-resize knows how to resize, and for PVs. The user "
+"may need to resize LVs inside PVs, and also resize filesystem types that "
+"virt-resize does not know how to expand."
+msgstr ""
+
+#. type: =head2
+#: ../resize/virt-resize.pod:195
+msgid "SHRINKING A VIRTUAL MACHINE DISK"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:197
+msgid ""
+"Shrinking is somewhat more complex than expanding, and only an overview is "
+"given here."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:200
+msgid ""
+"Firstly virt-resize will not attempt to shrink any partition content (PVs, "
+"filesystems). The user has to shrink content before passing the disk image "
+"to virt-resize, and virt-resize will check that the content has been shrunk "
+"properly."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:205
+msgid "(Shrinking can also be done offline using L<guestfish(1)>)"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:207
+msgid ""
+"After shrinking PVs and filesystems, shut down the guest, and proceed with "
+"steps 3 and 4 above to allocate a new disk image."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:210
+msgid ""
+"Then run virt-resize with any of the I<--shrink> and/or I<--resize> options."
+msgstr ""
+
+#. type: =head2
+#: ../resize/virt-resize.pod:213
+msgid "IGNORING OR DELETING PARTITIONS"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:215
+msgid ""
+"virt-resize also gives a convenient way to ignore or delete partitions when "
+"copying from the input disk to the output disk. Ignoring a partition speeds "
+"up the copy where you don't care about the existing contents of a "
+"partition. Deleting a partition removes it completely, but note that it "
+"also renumbers any partitions after the one which is deleted, which can "
+"leave some guests unbootable."
+msgstr ""
+
+#. type: =head2
+#: ../resize/virt-resize.pod:222
+msgid "QCOW2 AND NON-SPARSE RAW FORMATS"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:224
+msgid ""
+"If the input disk is in qcow2 format, then you may prefer that the output is "
+"in qcow2 format as well. Alternately, virt-resize can convert the format on "
+"the fly. The output format is simply determined by the format of the empty "
+"output container that you provide. Thus to create qcow2 output, use:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:230
+#, no-wrap
+msgid ""
+" qemu-img create [-c] -f qcow2 outdisk [size]\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:232
+msgid "instead of the truncate command (use I<-c> for a compressed disk)."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:234
+msgid "Similarly, to get non-sparse raw output use:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:236
+#, no-wrap
+msgid ""
+" fallocate -l size outdisk\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:238
+msgid ""
+"(on older systems that don't have the L<fallocate(1)> command use C<dd if=/"
+"dev/zero of=outdisk bs=1M count=..>)"
+msgstr ""
+
+#. type: =head2
+#: ../resize/virt-resize.pod:241
+msgid "LOGICAL PARTITIONS"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:243
+msgid ""
+"Logical partitions (a.k.a. C</dev/sda5+> on disks using DOS partition "
+"tables) cannot be resized."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:246
+msgid ""
+"To understand what is going on, firstly one of the four partitions C</dev/"
+"sda1-4> will have MBR partition type C<05> or C<0f>. This is called the "
+"B<extended partition>. Use L<virt-filesystems(1)> to see the MBR partition "
+"type."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:251
+msgid "Logical partitions live inside the extended partition."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:253
+msgid ""
+"The extended partition can be expanded, but not shrunk (unless you force it, "
+"which is not advisable). When the extended partition is copied across, all "
+"the logical partitions contained inside are copied over implicitly. Virt-"
+"resize does not look inside the extended partition, so it copies the logical "
+"partitions blindly."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:259
+msgid ""
+"You cannot specify a logical partition (C</dev/sda5+>) at all on the command "
+"line. Doing so will give an error."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:268 ../sparsify/virt-sparsify.pod:105
+msgid "Display help."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:270
+msgid "B<--align-first auto>"
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:272
+msgid "B<--align-first never>"
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:274
+msgid "B<--align-first always>"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:276
+msgid ""
+"Align the first partition for improved performance (see also the I<--"
+"alignment> option)."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:279
+msgid ""
+"The default is I<--align-first auto> which only aligns the first partition "
+"if it is safe to do so. That is, only when we know how to fix the "
+"bootloader automatically, and at the moment that can only be done for "
+"Windows guests."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:284
+msgid ""
+"I<--align-first never> means we never move the first partition. This is the "
+"safest option. Try this if the guest does not boot after resizing."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:288
+msgid ""
+"I<--align-first always> means we always align the first partition (if it "
+"needs to be aligned). For some guests this will break the bootloader, "
+"making the guest unbootable."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:292
+msgid "B<--alignment N>"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:294
+msgid ""
+"Set the alignment of partitions to C<N> sectors. The default in virt-resize "
+"E<lt> 1.13.19 was 64 sectors, and after that is 128 sectors."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:298
+msgid ""
+"Assuming 512 byte sector size inside the guest, here are some suitable "
+"values for this:"
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:303
+msgid "I<--alignment 1> (512 bytes)"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:305
+msgid ""
+"The partitions would be packed together as closely as possible, but would be "
+"completely unaligned. In some cases this can cause very poor performance. "
+"See L<virt-alignment-scan(1)> for further details."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:309
+msgid "I<--alignment 8> (4K)"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:311
+msgid ""
+"This would be the minimum acceptable alignment for reasonable performance on "
+"modern hosts."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:314
+msgid "I<--alignment 128> (64K)"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:316
+msgid ""
+"This alignment provides good performance when the host is using high end "
+"network storage."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:319
+msgid "I<--alignment 2048> (1M)"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:321
+msgid ""
+"This is the standard alignment used by all newly installed guests since "
+"around 2008."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:326
+msgid "B<-d>"
+msgstr "B<-d>"
+
+#. type: =item
+#: ../resize/virt-resize.pod:328 ../tools/virt-make-fs.pl:177
+#: ../tools/virt-win-reg.pl:120
+msgid "B<--debug>"
+msgstr "B<--debug>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:330 ../tools/virt-win-reg.pl:122
+msgid "Enable debugging messages."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:332
+msgid "B<--delete part>"
+msgstr "B<--delete розділ>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:334
+msgid ""
+"Delete the named partition. It would be more accurate to describe this as "
+"\"don't copy it over\", since virt-resize doesn't do in-place changes and "
+"the original disk image is left intact."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:338
+msgid ""
+"Note that when you delete a partition, then anything contained in the "
+"partition is also deleted. Furthermore, this causes any partitions that "
+"come after to be I<renumbered>, which can easily make your guest unbootable."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:343 ../resize/virt-resize.pod:404
+#: ../resize/virt-resize.pod:531 ../sparsify/virt-sparsify.pod:145
+msgid "You can give this option multiple times."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:345
+msgid "B<--expand part>"
+msgstr "B<--expand розділ>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:347
+msgid ""
+"Expand the named partition so it uses up all extra space (space left over "
+"after any other resize changes that you request have been done)."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:350
+msgid ""
+"If virt-resize knows how, it will expand the direct content of the "
+"partition. For example, if the partition is an LVM PV, it will expand the "
+"PV to fit (like calling L<pvresize(8)>). Virt-resize leaves any other "
+"content it doesn't know about alone."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:355
+msgid "Currently virt-resize can resize:"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:361
+msgid "ext2, ext3 and ext4 filesystems."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:365
+msgid "NTFS filesystems, if libguestfs was compiled with support for NTFS."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:367
+msgid ""
+"The filesystem must have been shut down consistently last time it was used. "
+"Additionally, L<ntfsresize(8)> marks the resized filesystem as requiring a "
+"consistency check, so at the first boot after resizing Windows will check "
+"the disk."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:374
+msgid ""
+"LVM PVs (physical volumes). virt-resize does not usually resize anything "
+"inside the PV, but see the I<--LV-expand> option. The user could also "
+"resize LVs as desired after boot."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:380
+msgid "Btrfs filesystems, if libguestfs was compiled with support for btrfs."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:384 ../resize/virt-resize.pod:559
+msgid "Note that you cannot use I<--expand> and I<--shrink> together."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:386 ../sparsify/virt-sparsify.pod:125
+#: ../tools/virt-list-filesystems.pl:91 ../tools/virt-list-partitions.pl:92
+#: ../tools/virt-tar.pl:141 ../tools/virt-win-reg.pl:142
+msgid "B<--format> raw"
+msgstr "B<--format> raw"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:388 ../sparsify/virt-sparsify.pod:129
+msgid ""
+"Specify the format of the input disk image. If this flag is not given then "
+"it is auto-detected from the image itself."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:394
+msgid ""
+"Note that this option I<does not> affect the output format. See L</QCOW2 "
+"AND NON-SPARSE RAW FORMATS>."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:397
+msgid "B<--ignore part>"
+msgstr "B<--ignore розділ>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:399
+msgid ""
+"Ignore the named partition. Effectively this means the partition is "
+"allocated on the destination disk, but the content is not copied across from "
+"the source disk. The content of the partition will be blank (all zero "
+"bytes)."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:406
+msgid "B<--LV-expand logvol>"
+msgstr "B<--LV-expand логічний_том>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:408
+msgid ""
+"This takes the logical volume and, as a final step, expands it to fill all "
+"the space available in its volume group. A typical usage, assuming a Linux "
+"guest with a single PV C</dev/sda2> and a root device called C</dev/vg_guest/"
+"lv_root> would be:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:413
+#, no-wrap
+msgid ""
+" virt-resize indisk outdisk \\\n"
+" --expand /dev/sda2 --LV-expand /dev/vg_guest/lv_root\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:416
+msgid ""
+"This would first expand the partition (and PV), and then expand the root "
+"device to fill the extra space in the PV."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:419
+msgid ""
+"The contents of the LV are also resized if virt-resize knows how to do "
+"that. You can stop virt-resize from trying to expand the content by using "
+"the option I<--no-expand-content>."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:423
+msgid "Use L<virt-filesystems(1)> to list the filesystems in the guest."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:425
+msgid ""
+"You can give this option multiple times, I<but> it doesn't make sense to do "
+"this unless the logical volumes you specify are all in different volume "
+"groups."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:429 ../sparsify/virt-sparsify.pod:147
+msgid "B<--machine-readable>"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:431 ../sparsify/virt-sparsify.pod:149
+msgid ""
+"This option is used to make the output more machine friendly when being "
+"parsed by other programs. See L</MACHINE READABLE OUTPUT> below."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:437
+msgid "B<--dryrun>"
+msgstr "B<--dryrun>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:439
+msgid "Print a summary of what would be done, but don't do anything."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:441
+msgid "B<--no-copy-boot-loader>"
+msgstr "B<--no-copy-boot-loader>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:443
+msgid ""
+"By default, virt-resize copies over some sectors at the start of the disk "
+"(up to the beginning of the first partition). Commonly these sectors "
+"contain the Master Boot Record (MBR) and the boot loader, and are required "
+"in order for the guest to boot correctly."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:448
+msgid ""
+"If you specify this flag, then this initial copy is not done. You may need "
+"to reinstall the boot loader in this case."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:451
+msgid "B<--no-extra-partition>"
+msgstr "B<--no-extra-partition>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:453
+msgid ""
+"By default, virt-resize creates an extra partition if there is any extra, "
+"unused space after all resizing has happened. Use this option to prevent "
+"the extra partition from being created. If you do this then the extra space "
+"will be inaccessible until you run fdisk, parted, or some other partitioning "
+"tool in the guest."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:459
+msgid ""
+"Note that if the surplus space is smaller than 10 MB, no extra partition "
+"will be created."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:462
+msgid "B<--no-expand-content>"
+msgstr "B<--no-expand-content>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:464
+msgid ""
+"By default, virt-resize will try to expand the direct contents of "
+"partitions, if it knows how (see I<--expand> option above)."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:467
+msgid ""
+"If you give the I<--no-expand-content> option then virt-resize will not "
+"attempt this."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:470
+msgid "B<--ntfsresize-force>"
+msgstr "B<--ntfsresize-force>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:472
+msgid ""
+"Pass the I<--force> option to L<ntfsresize(8)>, allowing resizing even if "
+"the NTFS disk is marked as needing a consistency check. You have to use "
+"this option if you want to resize a Windows guest multiple times without "
+"booting into Windows between each resize."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:478
+msgid "B<--output-format> raw"
+msgstr "B<--output-format> raw"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:480
+msgid ""
+"Specify the format of the output disk image. If this flag is not given then "
+"it is auto-detected from the image itself."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:486
+msgid ""
+"Note that this option I<does not create> the output format. This option "
+"just tells libguestfs what it is so it doesn't try to guess it. You still "
+"need to create the output disk with the right format. See L</QCOW2 AND NON-"
+"SPARSE RAW FORMATS>."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:495
+msgid "Don't print the summary."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:497
+msgid "B<--resize part=size>"
+msgstr "B<--resize розділ=розмір>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:499
+msgid ""
+"Resize the named partition (expanding or shrinking it) so that it has the "
+"given size."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:502
+msgid ""
+"C<size> can be expressed as an absolute number followed by b/K/M/G to mean "
+"bytes, Kilobytes, Megabytes, or Gigabytes; or as a percentage of the current "
+"size; or as a relative number or percentage. For example:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:508
+#, no-wrap
+msgid ""
+" --resize /dev/sda2=10G\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:510
+#, no-wrap
+msgid ""
+" --resize /dev/sda4=90%\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:512
+#, no-wrap
+msgid ""
+" --resize /dev/sda2=+1G\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:514
+#, no-wrap
+msgid ""
+" --resize /dev/sda2=-200M\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:516
+#, no-wrap
+msgid ""
+" --resize /dev/sda1=+128K\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:518
+#, no-wrap
+msgid ""
+" --resize /dev/sda1=+10%\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:520
+#, no-wrap
+msgid ""
+" --resize /dev/sda1=-10%\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:522
+msgid ""
+"You can increase the size of any partition. Virt-resize will expand the "
+"direct content of the partition if it knows how (see I<--expand> below)."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:526
+msgid ""
+"You can only I<decrease> the size of partitions that contain filesystems or "
+"PVs which have already been shrunk. Virt-resize will check this has been "
+"done before proceeding, or else will print an error (see also I<--resize-"
+"force>)."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:533
+msgid "B<--resize-force part=size>"
+msgstr "B<--resize-force розділ=розмір>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:535
+msgid ""
+"This is the same as I<--resize> except that it will let you decrease the "
+"size of any partition. Generally this means you will lose any data which "
+"was at the end of the partition you shrink, but you may not care about that "
+"(eg. if shrinking an unused partition, or if you can easily recreate it such "
+"as a swap partition)."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:541
+msgid "See also the I<--ignore> option."
+msgstr ""
+
+#. type: =item
+#: ../resize/virt-resize.pod:543
+msgid "B<--shrink part>"
+msgstr "B<--shrink розділ>"
+
+#. type: textblock
+#: ../resize/virt-resize.pod:545
+msgid ""
+"Shrink the named partition until the overall disk image fits in the "
+"destination. The named partition B<must> contain a filesystem or PV which "
+"has already been shrunk using another tool (eg. L<guestfish(1)> or other "
+"online tools). Virt-resize will check this and give an error if it has not "
+"been done."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:551
+msgid ""
+"The amount by which the overall disk must be shrunk (after carrying out all "
+"other operations requested by the user) is called the \"deficit\". For "
+"example, a straight copy (assume no other operations) from a 5GB disk image "
+"to a 4GB disk image results in a 1GB deficit. In this case, virt-resize "
+"would give an error unless the user specified a partition to shrink and that "
+"partition had more than a gigabyte of free space."
+msgstr ""
+
+#. type: =head1
+#: ../resize/virt-resize.pod:569 ../sparsify/virt-sparsify.pod:177
+msgid "MACHINE READABLE OUTPUT"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:571
+msgid ""
+"The I<--machine-readable> option can be used to make the output more machine "
+"friendly, which is useful when calling virt-resize from other programs, GUIs "
+"etc."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:575 ../sparsify/virt-sparsify.pod:183
+msgid "There are two ways to use this option."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:577
+msgid ""
+"Firstly use the option on its own to query the capabilities of the virt-"
+"resize binary. Typical output looks like this:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:580
+#, no-wrap
+msgid ""
+" $ virt-resize --machine-readable\n"
+" virt-resize\n"
+" ntfsresize-force\n"
+" 32bitok\n"
+" ntfs\n"
+" btrfs\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:587 ../sparsify/virt-sparsify.pod:193
+msgid ""
+"A list of features is printed, one per line, and the program exits with "
+"status 0."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:590 ../sparsify/virt-sparsify.pod:196
+msgid ""
+"Secondly use the option in conjunction with other options to make the "
+"regular program output more machine friendly."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:593 ../sparsify/virt-sparsify.pod:199
+msgid "At the moment this means:"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:599 ../sparsify/virt-sparsify.pod:205
+msgid ""
+"Progress bar messages can be parsed from stdout by looking for this regular "
+"expression:"
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:602 ../sparsify/virt-sparsify.pod:208
+#, no-wrap
+msgid ""
+" ^[0-9]+/[0-9]+$\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:606 ../sparsify/virt-sparsify.pod:212
+msgid ""
+"The calling program should treat messages sent to stdout (except for "
+"progress bar messages) as status messages. They can be logged and/or "
+"displayed to the user."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:612
+msgid ""
+"The calling program should treat messages sent to stderr as error messages. "
+"In addition, virt-resize exits with a non-zero status code if there was a "
+"fatal error."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:618
+msgid ""
+"Versions of the program prior to 1.13.9 did not support the I<--machine-"
+"readable> option and will return an error."
+msgstr ""
+
+#. type: =head2
+#: ../resize/virt-resize.pod:623
+msgid "\"Partition 1 does not end on cylinder boundary.\""
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:625
+msgid ""
+"Virt-resize aligns partitions to multiples of 128 sectors (see the I<--"
+"alignment> parameter). Usually this means the partitions will not be "
+"aligned to the ancient CHS geometry. However CHS geometry is meaningless "
+"for disks manufactured since the early 1990s, and doubly so for virtual hard "
+"drives. Alignment of partitions to cylinders is not required by any modern "
+"operating system."
+msgstr ""
+
+#. type: =head2
+#: ../resize/virt-resize.pod:632
+msgid "RESIZING WINDOWS VIRTUAL MACHINES"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:634
+msgid ""
+"In Windows Vista and later versions, Microsoft switched to using a separate "
+"boot partition. In these VMs, typically C</dev/sda1> is the boot partition "
+"and C</dev/sda2> is the main (C:) drive. Resizing the first (boot) "
+"partition causes the bootloader to fail with C<0xC0000225> error. Resizing "
+"the second partition (ie. C: drive) should work."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:641
+msgid ""
+"Windows may initiate a lengthy \"chkdsk\" on first boot after a resize, if "
+"NTFS partitions have been expanded. This is just a safety check and (unless "
+"it find errors) is nothing to worry about."
+msgstr ""
+
+#. type: =head2
+#: ../resize/virt-resize.pod:645
+msgid "GUEST BOOT STUCK AT \"GRUB\""
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:647
+msgid ""
+"If a Linux guest does not boot after resizing, and the boot is stuck after "
+"printing C<GRUB> on the console, try reinstalling grub."
+msgstr ""
+
+#. type: verbatim
+#: ../resize/virt-resize.pod:650
+#, no-wrap
+msgid ""
+" guestfish -i -a newdisk\n"
+" ><fs> cat /boot/grub/device.map\n"
+" # check the contents of this file are sensible or\n"
+" # edit the file if necessary\n"
+" ><fs> grub-install / /dev/vda\n"
+" ><fs> exit\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:657
+msgid ""
+"For more flexible guest reconfiguration, including if you need to specify "
+"other parameters to grub-install, use L<virt-rescue(1)>."
+msgstr ""
+
+#. type: =head1
+#: ../resize/virt-resize.pod:660
+msgid "ALTERNATIVE TOOLS"
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:662
+msgid ""
+"There are several proprietary tools for resizing partitions. We won't "
+"mention any here."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:665
+msgid ""
+"L<parted(8)> and its graphical shell gparted can do some types of resizing "
+"operations on disk images. They can resize and move partitions, but I don't "
+"think they can do anything with the contents, and they certainly don't "
+"understand LVM."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:670
+msgid ""
+"L<guestfish(1)> can do everything that virt-resize can do and a lot more, "
+"but at a much lower level. You will probably end up hand-calculating sector "
+"offsets, which is something that virt-resize was designed to avoid. If you "
+"want to see the guestfish-equivalent commands that virt-resize runs, use the "
+"I<--debug> flag."
+msgstr ""
+
+#. type: textblock
+#: ../resize/virt-resize.pod:690
+msgid ""
+"L<virt-filesystems(1)>, L<virt-df(1)>, L<guestfs(3)>, L<guestfish(1)>, L<lvm"
+"(8)>, L<pvresize(8)>, L<lvresize(8)>, L<resize2fs(8)>, L<ntfsresize(8)>, "
+"L<btrfs(8)>, L<virsh(1)>, L<parted(8)>, L<truncate(1)>, L<fallocate(1)>, "
+"L<grub(8)>, L<grub-install(8)>, L<virt-rescue(1)>, L<virt-sparsify(1)>, "
+"L<virt-alignment-scan(1)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../ruby/examples/guestfs-ruby.pod:5
+msgid "guestfs-ruby - How to use libguestfs from Ruby"
+msgstr ""
+
+#. type: verbatim
+#: ../ruby/examples/guestfs-ruby.pod:9
+#, no-wrap
+msgid ""
+" require 'guestfs'\n"
+" g = Guestfs::Guestfs.new()\n"
+" g.add_drive_opts(\"disk.img\",\n"
+" :readonly => 1, :format => \"raw\")\n"
+" g.launch()\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../ruby/examples/guestfs-ruby.pod:17
+msgid ""
+"This manual page documents how to call libguestfs from the Ruby programming "
+"language. This page just documents the differences from the C API and gives "
+"some examples. If you are not familiar with using libguestfs, you also need "
+"to read L<guestfs(3)>."
+msgstr ""
+
+#. type: textblock
+#: ../ruby/examples/guestfs-ruby.pod:24
+msgid ""
+"Errors from libguestfs functions are mapped into the C<Error> exception. "
+"This has a single parameter which is the error message (a string)."
+msgstr ""
+
+#. type: textblock
+#: ../ruby/examples/guestfs-ruby.pod:38
+msgid ""
+"L<guestfs(3)>, L<guestfs-examples(3)>, L<guestfs-erlang(3)>, L<guestfs-java"
+"(3)>, L<guestfs-ocaml(3)>, L<guestfs-perl(3)>, L<guestfs-python(3)>, "
+"L<guestfs-recipes(1)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:5
+msgid "virt-sparsify - Make a virtual machine disk sparse"
+msgstr ""
+
+#. type: verbatim
+#: ../sparsify/virt-sparsify.pod:9
+#, no-wrap
+msgid ""
+" virt-sparsify [--options] indisk outdisk\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:13
+msgid ""
+"Virt-sparsify is a tool which can make a virtual machine disk (or any disk "
+"image) sparse a.k.a. thin-provisioned. This means that free space within "
+"the disk image can be converted back to free space on the host."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:18
+msgid ""
+"Virt-sparsify can locate and sparsify free space in most filesystems (eg. "
+"ext2/3/4, btrfs, NTFS, etc.), and also in LVM physical volumes."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:21
+msgid ""
+"Virt-sparsify can also convert between some disk formats, for example "
+"converting a raw disk image to a thin-provisioned qcow2 image."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:24
+msgid ""
+"Virt-sparsify can operate on any disk image, not just ones from virtual "
+"machines. If a virtual machine has more than one attached disk, you must "
+"sparsify each one separately."
+msgstr ""
+
+#. type: =head2
+#: ../sparsify/virt-sparsify.pod:28
+msgid "IMPORTANT LIMITATIONS"
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:34
+msgid ""
+"Virt-sparsify does not do in-place modifications. It copies from a source "
+"image to a destination image, leaving the source unchanged. I<Check that "
+"the sparsification was successful before deleting the source image>."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:41
+msgid "The virtual machine I<must be shut down> before using this tool."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:45
+msgid ""
+"Virt-sparsify may require up to 2x the virtual size of the source disk image "
+"(1 temporary copy + 1 destination image). This is in the worst case and "
+"usually much less space is required."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:51
+msgid ""
+"Virt-sparsify cannot resize disk images. To do that, use L<virt-resize(1)>."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:56
+msgid "Virt-sparsify cannot handle encrypted disks."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:60
+msgid ""
+"Virt-sparsify cannot yet sparsify the space between partitions. Note that "
+"this space is often used for critical items like bootloaders so it's not "
+"really unused."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:66
+msgid ""
+"Virt-sparsify does not yet know how to sparsify swapspace. It is not safe "
+"to do this unless we can be sure there is no hibernation data, so at the "
+"moment swap partitions are ignored."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:72
+msgid ""
+"You may also want to read the manual pages for the associated tools L<virt-"
+"filesystems(1)> and L<virt-df(1)> before starting."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:77
+msgid "Typical usage is:"
+msgstr ""
+
+#. type: verbatim
+#: ../sparsify/virt-sparsify.pod:79
+#, no-wrap
+msgid ""
+" virt-sparsify indisk outdisk\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:81
+msgid ""
+"which copies C<indisk> to C<outdisk>, making the output sparse. C<outdisk> "
+"is created, or overwritten if it already exists. The format of the input "
+"disk is detected (eg. qcow2) and the same format is used for the output disk."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:86
+msgid "To convert between formats, use the I<--convert> option:"
+msgstr ""
+
+#. type: verbatim
+#: ../sparsify/virt-sparsify.pod:88
+#, no-wrap
+msgid ""
+" virt-sparsify disk.raw --convert qcow2 disk.qcow2\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:90
+msgid ""
+"Virt-sparsify tries to zero and sparsify free space on every filesystem it "
+"can find within the source disk image. You can get it to ignore (don't zero "
+"free space on) certain filesystems by doing:"
+msgstr ""
+
+#. type: verbatim
+#: ../sparsify/virt-sparsify.pod:94
+#, no-wrap
+msgid ""
+" virt-sparsify --ignore /dev/sda1 indisk outdisk\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:96
+msgid ""
+"See L<virt-filesystems(1)> to get a list of filesystems within a disk image."
+msgstr ""
+
+#. type: =item
+#: ../sparsify/virt-sparsify.pod:107
+msgid "B<--convert> raw"
+msgstr ""
+
+#. type: =item
+#: ../sparsify/virt-sparsify.pod:109
+msgid "B<--convert> qcow2"
+msgstr ""
+
+#. type: =item
+#: ../sparsify/virt-sparsify.pod:111
+msgid "B<--convert> [other formats]"
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:113
+msgid ""
+"Use C<output-format> as the format for the destination image. If this is "
+"not specified, then the input format is used."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:116
+msgid "Supported and known-working output formats are: C<raw>, C<qcow2>."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:118
+msgid ""
+"You can also use any format supported by the L<qemu-img(1)> program, eg. "
+"C<vdi> or C<vmdk>, but support for other formats is reliant on qemu."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:122
+msgid ""
+"Specifying the I<--convert> option is usually a good idea, because then virt-"
+"sparsify doesn't need to try to guess the input format."
+msgstr ""
+
+#. type: =item
+#: ../sparsify/virt-sparsify.pod:127
+msgid "B<--format> qcow2"
+msgstr ""
+
+#. type: =item
+#: ../sparsify/virt-sparsify.pod:135
+msgid "B<--ignore> filesystem"
+msgstr ""
+
+#. type: =item
+#: ../sparsify/virt-sparsify.pod:137
+msgid "B<--ignore> volgroup"
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:139
+msgid ""
+"Ignore the named filesystem. Free space on the filesystem will not be "
+"zeroed, but existing blocks of zeroes will still be sparsified."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:142
+msgid ""
+"In the second form, this ignores the named volume group. Use the volume "
+"group name without the C</dev/> prefix, eg. I<--ignore vg_foo>"
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:157
+msgid "This disables progress bars and other unnecessary output."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:179
+msgid ""
+"The I<--machine-readable> option can be used to make the output more machine "
+"friendly, which is useful when calling virt-sparsify from other programs, "
+"GUIs etc."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:185
+msgid ""
+"Firstly use the option on its own to query the capabilities of the virt-"
+"sparsify binary. Typical output looks like this:"
+msgstr ""
+
+#. type: verbatim
+#: ../sparsify/virt-sparsify.pod:188
+#, no-wrap
+msgid ""
+" $ virt-sparsify --machine-readable\n"
+" virt-sparsify\n"
+" ntfs\n"
+" btrfs\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:218
+msgid ""
+"The calling program should treat messages sent to stderr as error messages. "
+"In addition, virt-sparsify exits with a non-zero status code if there was a "
+"fatal error."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:224
+msgid ""
+"All versions of virt-sparsify have supported the I<--machine-readable> "
+"option."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:238
+msgid ""
+"Location of the temporary directory used for the potentially large temporary "
+"overlay file."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:241
+msgid ""
+"You should ensure there is enough free space in the worst case for a full "
+"copy of the source disk (I<virtual> size), or else set C<$TMPDIR> to point "
+"to another directory that has enough space."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:245
+msgid "This defaults to C</tmp>."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:249
+msgid ""
+"For other environment variables, see L<guestfs(3)/ENVIRONMENT VARIABLES>."
+msgstr ""
+
+#. type: textblock
+#: ../sparsify/virt-sparsify.pod:253
+msgid ""
+"L<virt-filesystems(1)>, L<virt-df(1)>, L<virt-resize(1)>, L<virt-rescue(1)>, "
+"L<guestfs(3)>, L<guestfish(1)>, L<truncate(1)>, L<fallocate(1)>, L<qemu-img"
+"(1)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1
+msgid "guestfs_add_cdrom"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_cdrom (guestfs_h *g,\n"
+" const char *filename);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:7 ../src/guestfs-actions.pod:302
+#: ../src/guestfs-actions.pod:323
+msgid ""
+"I<This function is deprecated.> In new code, use the L</"
+"guestfs_add_drive_opts> call instead."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:24
+msgid ""
+"This call checks for the existence of C<filename>. This stops you from "
+"specifying other types of drive which are supported by qemu such as C<nbd:> "
+"and C<http:> URLs. To specify those, use the general C<guestfs_config> call "
+"instead."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:31
+msgid ""
+"If you just want to add an ISO file (often you use this as an efficient way "
+"to transfer large files into the guest), then you should probably use "
+"C<guestfs_add_drive_ro> instead."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:37 ../src/guestfs-actions.pod:187
+#: ../src/guestfs-actions.pod:254 ../src/guestfs-actions.pod:291
+#: ../src/guestfs-actions.pod:312 ../src/guestfs-actions.pod:333
+#: ../src/guestfs-actions.pod:346 ../src/guestfs-actions.pod:360
+#: ../src/guestfs-actions.pod:480 ../src/guestfs-actions.pod:500
+#: ../src/guestfs-actions.pod:514 ../src/guestfs-actions.pod:559
+#: ../src/guestfs-actions.pod:587 ../src/guestfs-actions.pod:605
+#: ../src/guestfs-actions.pod:672 ../src/guestfs-actions.pod:705
+#: ../src/guestfs-actions.pod:719 ../src/guestfs-actions.pod:734
+#: ../src/guestfs-actions.pod:833 ../src/guestfs-actions.pod:851
+#: ../src/guestfs-actions.pod:865 ../src/guestfs-actions.pod:879
+#: ../src/guestfs-actions.pod:916 ../src/guestfs-actions.pod:1099
+#: ../src/guestfs-actions.pod:1119 ../src/guestfs-actions.pod:1137
+#: ../src/guestfs-actions.pod:1227 ../src/guestfs-actions.pod:1286
+#: ../src/guestfs-actions.pod:1332 ../src/guestfs-actions.pod:1372
+#: ../src/guestfs-actions.pod:1425 ../src/guestfs-actions.pod:1478
+#: ../src/guestfs-actions.pod:1536 ../src/guestfs-actions.pod:1590
+#: ../src/guestfs-actions.pod:1609 ../src/guestfs-actions.pod:1623
+#: ../src/guestfs-actions.pod:1651 ../src/guestfs-actions.pod:1721
+#: ../src/guestfs-actions.pod:1752 ../src/guestfs-actions.pod:1777
+#: ../src/guestfs-actions.pod:1819 ../src/guestfs-actions.pod:1932
+#: ../src/guestfs-actions.pod:1959 ../src/guestfs-actions.pod:2174
+#: ../src/guestfs-actions.pod:2196 ../src/guestfs-actions.pod:2283
+#: ../src/guestfs-actions.pod:2791 ../src/guestfs-actions.pod:2935
+#: ../src/guestfs-actions.pod:2996 ../src/guestfs-actions.pod:3031
+#: ../src/guestfs-actions.pod:4088 ../src/guestfs-actions.pod:4103
+#: ../src/guestfs-actions.pod:4128 ../src/guestfs-actions.pod:4317
+#: ../src/guestfs-actions.pod:4331 ../src/guestfs-actions.pod:4344
+#: ../src/guestfs-actions.pod:4358 ../src/guestfs-actions.pod:4373
+#: ../src/guestfs-actions.pod:4409 ../src/guestfs-actions.pod:4481
+#: ../src/guestfs-actions.pod:4501 ../src/guestfs-actions.pod:4518
+#: ../src/guestfs-actions.pod:4538 ../src/guestfs-actions.pod:4558
+#: ../src/guestfs-actions.pod:4593 ../src/guestfs-actions.pod:4612
+#: ../src/guestfs-actions.pod:4631 ../src/guestfs-actions.pod:4666
+#: ../src/guestfs-actions.pod:4678 ../src/guestfs-actions.pod:4711
+#: ../src/guestfs-actions.pod:4727 ../src/guestfs-actions.pod:4740
+#: ../src/guestfs-actions.pod:4755 ../src/guestfs-actions.pod:4772
+#: ../src/guestfs-actions.pod:4865 ../src/guestfs-actions.pod:4885
+#: ../src/guestfs-actions.pod:4898 ../src/guestfs-actions.pod:4949
+#: ../src/guestfs-actions.pod:4967 ../src/guestfs-actions.pod:4985
+#: ../src/guestfs-actions.pod:5001 ../src/guestfs-actions.pod:5015
+#: ../src/guestfs-actions.pod:5029 ../src/guestfs-actions.pod:5046
+#: ../src/guestfs-actions.pod:5061 ../src/guestfs-actions.pod:5088
+#: ../src/guestfs-actions.pod:5151 ../src/guestfs-actions.pod:5224
+#: ../src/guestfs-actions.pod:5255 ../src/guestfs-actions.pod:5274
+#: ../src/guestfs-actions.pod:5293 ../src/guestfs-actions.pod:5305
+#: ../src/guestfs-actions.pod:5322 ../src/guestfs-actions.pod:5335
+#: ../src/guestfs-actions.pod:5350 ../src/guestfs-actions.pod:5365
+#: ../src/guestfs-actions.pod:5397 ../src/guestfs-actions.pod:5423
+#: ../src/guestfs-actions.pod:5462 ../src/guestfs-actions.pod:5482
+#: ../src/guestfs-actions.pod:5496 ../src/guestfs-actions.pod:5513
+#: ../src/guestfs-actions.pod:5562 ../src/guestfs-actions.pod:5615
+#: ../src/guestfs-actions.pod:5662 ../src/guestfs-actions.pod:5705
+#: ../src/guestfs-actions.pod:5733 ../src/guestfs-actions.pod:5750
+#: ../src/guestfs-actions.pod:5768 ../src/guestfs-actions.pod:5905
+#: ../src/guestfs-actions.pod:5962 ../src/guestfs-actions.pod:5984
+#: ../src/guestfs-actions.pod:6002 ../src/guestfs-actions.pod:6054
+#: ../src/guestfs-actions.pod:6120 ../src/guestfs-actions.pod:6137
+#: ../src/guestfs-actions.pod:6150 ../src/guestfs-actions.pod:6164
+#: ../src/guestfs-actions.pod:6453 ../src/guestfs-actions.pod:6472
+#: ../src/guestfs-actions.pod:6491 ../src/guestfs-actions.pod:6505
+#: ../src/guestfs-actions.pod:6517 ../src/guestfs-actions.pod:6531
+#: ../src/guestfs-actions.pod:6543 ../src/guestfs-actions.pod:6557
+#: ../src/guestfs-actions.pod:6573 ../src/guestfs-actions.pod:6591
+#: ../src/guestfs-actions.pod:6610 ../src/guestfs-actions.pod:6629
+#: ../src/guestfs-actions.pod:6659 ../src/guestfs-actions.pod:6677
+#: ../src/guestfs-actions.pod:6700 ../src/guestfs-actions.pod:6718
+#: ../src/guestfs-actions.pod:6737 ../src/guestfs-actions.pod:6758
+#: ../src/guestfs-actions.pod:6777 ../src/guestfs-actions.pod:6794
+#: ../src/guestfs-actions.pod:6813 ../src/guestfs-actions.pod:6841
+#: ../src/guestfs-actions.pod:6865 ../src/guestfs-actions.pod:6884
+#: ../src/guestfs-actions.pod:6900 ../src/guestfs-actions.pod:6924
+#: ../src/guestfs-actions.pod:6943 ../src/guestfs-actions.pod:6958
+#: ../src/guestfs-actions.pod:6977 ../src/guestfs-actions.pod:7021
+#: ../src/guestfs-actions.pod:7048 ../src/guestfs-actions.pod:7078
+#: ../src/guestfs-actions.pod:7190 ../src/guestfs-actions.pod:7311
+#: ../src/guestfs-actions.pod:7323 ../src/guestfs-actions.pod:7336
+#: ../src/guestfs-actions.pod:7349 ../src/guestfs-actions.pod:7371
+#: ../src/guestfs-actions.pod:7384 ../src/guestfs-actions.pod:7397
+#: ../src/guestfs-actions.pod:7410 ../src/guestfs-actions.pod:7425
+#: ../src/guestfs-actions.pod:7484 ../src/guestfs-actions.pod:7501
+#: ../src/guestfs-actions.pod:7517 ../src/guestfs-actions.pod:7533
+#: ../src/guestfs-actions.pod:7550 ../src/guestfs-actions.pod:7563
+#: ../src/guestfs-actions.pod:7583 ../src/guestfs-actions.pod:7619
+#: ../src/guestfs-actions.pod:7633 ../src/guestfs-actions.pod:7674
+#: ../src/guestfs-actions.pod:7687 ../src/guestfs-actions.pod:7705
+#: ../src/guestfs-actions.pod:7739 ../src/guestfs-actions.pod:7775
+#: ../src/guestfs-actions.pod:7891 ../src/guestfs-actions.pod:7906
+#: ../src/guestfs-actions.pod:7920 ../src/guestfs-actions.pod:7975
+#: ../src/guestfs-actions.pod:7988 ../src/guestfs-actions.pod:8033
+#: ../src/guestfs-actions.pod:8073 ../src/guestfs-actions.pod:8129
+#: ../src/guestfs-actions.pod:8149 ../src/guestfs-actions.pod:8182
+#: ../src/guestfs-actions.pod:8246 ../src/guestfs-actions.pod:8269
+#: ../src/guestfs-actions.pod:8295
+msgid "This function returns 0 on success or -1 on error."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:39 ../src/guestfs-actions.pod:189
+#: ../src/guestfs-actions.pod:1334 ../src/guestfs-actions.pod:2397
+#: ../src/guestfs-actions.pod:2495 ../src/guestfs-actions.pod:2620
+#: ../src/guestfs-actions.pod:4090 ../src/guestfs-actions.pod:4110
+#: ../src/guestfs-actions.pod:5399 ../src/guestfs-actions.pod:6679
+#: ../src/guestfs-actions.pod:6796 ../src/guestfs-actions.pod:6945
+#: ../src/guestfs-actions.pod:7427 ../src/guestfs-actions.pod:7552
+#: ../src/guestfs-actions.pod:8075
+msgid "(Added in 0.3)"
+msgstr "(Додано у 0.3)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:41
+msgid "guestfs_add_domain"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:43
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_domain (guestfs_h *g,\n"
+" const char *dom,\n"
+" ...);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:48 ../src/guestfs-actions.pod:198
+#: ../src/guestfs-actions.pod:890 ../src/guestfs-actions.pod:1214
+#: ../src/guestfs-actions.pod:1266 ../src/guestfs-actions.pod:1344
+#: ../src/guestfs-actions.pod:1413 ../src/guestfs-actions.pod:1466
+#: ../src/guestfs-actions.pod:1519 ../src/guestfs-actions.pod:3288
+#: ../src/guestfs-actions.pod:5100 ../src/guestfs-actions.pod:5409
+#: ../src/guestfs-actions.pod:5626
+msgid ""
+"You may supply a list of optional arguments to this call. Use zero or more "
+"of the following pairs of parameters, and terminate the list with C<-1> on "
+"its own. See L</CALLS WITH OPTIONAL ARGUMENTS>."
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:53
+#, no-wrap
+msgid ""
+" GUESTFS_ADD_DOMAIN_LIBVIRTURI, const char *libvirturi,\n"
+" GUESTFS_ADD_DOMAIN_READONLY, int readonly,\n"
+" GUESTFS_ADD_DOMAIN_IFACE, const char *iface,\n"
+" GUESTFS_ADD_DOMAIN_LIVE, int live,\n"
+" GUESTFS_ADD_DOMAIN_ALLOWUUID, int allowuuid,\n"
+" GUESTFS_ADD_DOMAIN_READONLYDISK, const char *readonlydisk,\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:60
+msgid ""
+"This function adds the disk(s) attached to the named libvirt domain C<dom>. "
+"It works by connecting to libvirt, requesting the domain and domain XML from "
+"libvirt, parsing it for disks, and calling C<guestfs_add_drive_opts> on each "
+"one."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:141
+msgid ""
+"The other optional parameters are passed directly through to "
+"C<guestfs_add_drive_opts>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:144 ../src/guestfs-actions.pod:403
+#: ../src/guestfs-actions.pod:573 ../src/guestfs-actions.pod:751
+#: ../src/guestfs-actions.pod:782 ../src/guestfs-actions.pod:800
+#: ../src/guestfs-actions.pod:819 ../src/guestfs-actions.pod:1797
+#: ../src/guestfs-actions.pod:2153 ../src/guestfs-actions.pod:2356
+#: ../src/guestfs-actions.pod:2467 ../src/guestfs-actions.pod:2518
+#: ../src/guestfs-actions.pod:2570 ../src/guestfs-actions.pod:2584
+#: ../src/guestfs-actions.pod:2607 ../src/guestfs-actions.pod:2922
+#: ../src/guestfs-actions.pod:3406 ../src/guestfs-actions.pod:3424
+#: ../src/guestfs-actions.pod:5585 ../src/guestfs-actions.pod:5802
+#: ../src/guestfs-actions.pod:6040 ../src/guestfs-actions.pod:6234
+#: ../src/guestfs-actions.pod:6260 ../src/guestfs-actions.pod:7660
+#: ../src/guestfs-actions.pod:8086 ../src/guestfs-actions.pod:8099
+#: ../src/guestfs-actions.pod:8112
+msgid "On error this function returns -1."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:146
+msgid "(Added in 1.7.4)"
+msgstr "(Додано у 1.7.4)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:148
+msgid "guestfs_add_domain_va"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:150
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_domain_va (guestfs_h *g,\n"
+" const char *dom,\n"
+" va_list args);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:155
+msgid "This is the \"va_list variant\" of L</guestfs_add_domain>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:157 ../src/guestfs-actions.pod:168
+#: ../src/guestfs-actions.pod:267 ../src/guestfs-actions.pod:278
+#: ../src/guestfs-actions.pod:929 ../src/guestfs-actions.pod:940
+#: ../src/guestfs-actions.pod:1242 ../src/guestfs-actions.pod:1255
+#: ../src/guestfs-actions.pod:1301 ../src/guestfs-actions.pod:1314
+#: ../src/guestfs-actions.pod:1391 ../src/guestfs-actions.pod:1403
+#: ../src/guestfs-actions.pod:1444 ../src/guestfs-actions.pod:1456
+#: ../src/guestfs-actions.pod:1497 ../src/guestfs-actions.pod:1509
+#: ../src/guestfs-actions.pod:1555 ../src/guestfs-actions.pod:1567
+#: ../src/guestfs-actions.pod:3372 ../src/guestfs-actions.pod:3384
+#: ../src/guestfs-actions.pod:5165 ../src/guestfs-actions.pod:5177
+#: ../src/guestfs-actions.pod:5437 ../src/guestfs-actions.pod:5449
+#: ../src/guestfs-actions.pod:5675 ../src/guestfs-actions.pod:5686
+msgid "See L</CALLS WITH OPTIONAL ARGUMENTS>."
+msgstr "Див. L</CALLS WITH OPTIONAL ARGUMENTS>."
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:159
+msgid "guestfs_add_domain_argv"
+msgstr "guestfs_add_domain_argv"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:161
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_domain_argv (guestfs_h *g,\n"
+" const char *dom,\n"
+" const struct guestfs_add_domain_argv *optargs);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:166
+msgid "This is the \"argv variant\" of L</guestfs_add_domain>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:170
+msgid "guestfs_add_drive"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:172
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_drive (guestfs_h *g,\n"
+" const char *filename);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:176
+msgid ""
+"This function is the equivalent of calling C<guestfs_add_drive_opts> with no "
+"optional parameters, so the disk is added writable, with the format being "
+"detected automatically."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:180
+msgid ""
+"Automatic detection of the format opens you up to a potential security hole "
+"when dealing with untrusted raw-format images. See CVE-2010-3851 and "
+"RHBZ#642934. Specifying the format closes this security hole. Therefore "
+"you should think about replacing calls to this function with calls to "
+"C<guestfs_add_drive_opts>, and specifying the format."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:191
+msgid "guestfs_add_drive_opts"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:193
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_drive_opts (guestfs_h *g,\n"
+" const char *filename,\n"
+" ...);\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:203
+#, no-wrap
+msgid ""
+" GUESTFS_ADD_DRIVE_OPTS_READONLY, int readonly,\n"
+" GUESTFS_ADD_DRIVE_OPTS_FORMAT, const char *format,\n"
+" GUESTFS_ADD_DRIVE_OPTS_IFACE, const char *iface,\n"
+" GUESTFS_ADD_DRIVE_OPTS_NAME, const char *name,\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:233
+msgid ""
+"This forces the image format. If you omit this (or use C<guestfs_add_drive> "
+"or C<guestfs_add_drive_ro>) then the format is automatically detected. "
+"Possible formats include C<raw> and C<qcow2>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:244
+msgid ""
+"This rarely-used option lets you emulate the behaviour of the deprecated "
+"C<guestfs_add_drive_with_if> call (q.v.)"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:256
+msgid "(Added in 1.5.23)"
+msgstr "(Додано у 1.5.23)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:258
+msgid "guestfs_add_drive_opts_va"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:260
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_drive_opts_va (guestfs_h *g,\n"
+" const char *filename,\n"
+" va_list args);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:265
+msgid "This is the \"va_list variant\" of L</guestfs_add_drive_opts>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:269
+msgid "guestfs_add_drive_opts_argv"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:271
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_drive_opts_argv (guestfs_h *g,\n"
+" const char *filename,\n"
+" const struct guestfs_add_drive_opts_argv *optargs);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:276
+msgid "This is the \"argv variant\" of L</guestfs_add_drive_opts>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:280
+msgid "guestfs_add_drive_ro"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:282
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_drive_ro (guestfs_h *g,\n"
+" const char *filename);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:286
+msgid ""
+"This function is the equivalent of calling C<guestfs_add_drive_opts> with "
+"the optional parameter C<GUESTFS_ADD_DRIVE_OPTS_READONLY> set to 1, so the "
+"disk is added read-only, with the format being detected automatically."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:293
+msgid "(Added in 1.0.38)"
+msgstr "(Додано у 1.0.38)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:295
+msgid "guestfs_add_drive_ro_with_if"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:297
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_drive_ro_with_if (guestfs_h *g,\n"
+" const char *filename,\n"
+" const char *iface);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:309
+msgid ""
+"This is the same as C<guestfs_add_drive_ro> but it allows you to specify the "
+"QEMU interface emulation to use at run time."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:314 ../src/guestfs-actions.pod:335
+#: ../src/guestfs-actions.pod:2881
+msgid "(Added in 1.0.84)"
+msgstr "(Додано у 1.0.84)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:316
+msgid "guestfs_add_drive_with_if"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:318
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_add_drive_with_if (guestfs_h *g,\n"
+" const char *filename,\n"
+" const char *iface);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:330
+msgid ""
+"This is the same as C<guestfs_add_drive> but it allows you to specify the "
+"QEMU interface emulation to use at run time."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:337
+msgid "guestfs_aug_clear"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:339
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_aug_clear (guestfs_h *g,\n"
+" const char *augpath);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:348 ../src/guestfs-actions.pod:2609
+msgid "(Added in 1.3.4)"
+msgstr "(Додано у 1.3.4)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:350
+msgid "guestfs_aug_close"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:352
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_aug_close (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:355
+msgid ""
+"Close the current Augeas handle and free up any resources used by it. After "
+"calling this, you have to call C<guestfs_aug_init> again before you can use "
+"any other Augeas functions."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:362 ../src/guestfs-actions.pod:387
+#: ../src/guestfs-actions.pod:405 ../src/guestfs-actions.pod:419
+#: ../src/guestfs-actions.pod:482 ../src/guestfs-actions.pod:502
+#: ../src/guestfs-actions.pod:516 ../src/guestfs-actions.pod:547
+#: ../src/guestfs-actions.pod:561 ../src/guestfs-actions.pod:575
+#: ../src/guestfs-actions.pod:589 ../src/guestfs-actions.pod:607
+#: ../src/guestfs-actions.pod:6311
+msgid "(Added in 0.7)"
+msgstr "(Додано у 0.7)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:364
+msgid "guestfs_aug_defnode"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:366
+#, no-wrap
+msgid ""
+" struct guestfs_int_bool *\n"
+" guestfs_aug_defnode (guestfs_h *g,\n"
+" const char *name,\n"
+" const char *expr,\n"
+" const char *val);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:375
+msgid ""
+"If C<expr> evaluates to an empty nodeset, a node is created, equivalent to "
+"calling C<guestfs_aug_set> C<expr>, C<value>. C<name> will be the nodeset "
+"containing that single node."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:383
+msgid ""
+"This function returns a C<struct guestfs_int_bool *>, or NULL if there was "
+"an error. I<The caller must call C<guestfs_free_int_bool> after use>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:389
+msgid "guestfs_aug_defvar"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:391
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_aug_defvar (guestfs_h *g,\n"
+" const char *name,\n"
+" const char *expr);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:407
+msgid "guestfs_aug_get"
+msgstr "guestfs_aug_get"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:409
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_aug_get (guestfs_h *g,\n"
+" const char *augpath);\n"
+"\n"
+msgstr ""
+" char *\n"
+" guestfs_aug_get (guestfs_h *g,\n"
+" const char *augpath);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:416 ../src/guestfs-actions.pod:980
+#: ../src/guestfs-actions.pod:998 ../src/guestfs-actions.pod:1058
+#: ../src/guestfs-actions.pod:1074 ../src/guestfs-actions.pod:1177
+#: ../src/guestfs-actions.pod:1666 ../src/guestfs-actions.pod:1683
+#: ../src/guestfs-actions.pod:1702 ../src/guestfs-actions.pod:1836
+#: ../src/guestfs-actions.pod:2024 ../src/guestfs-actions.pod:2136
+#: ../src/guestfs-actions.pod:2299 ../src/guestfs-actions.pod:2316
+#: ../src/guestfs-actions.pod:2383 ../src/guestfs-actions.pod:2426
+#: ../src/guestfs-actions.pod:2447 ../src/guestfs-actions.pod:2632
+#: ../src/guestfs-actions.pod:2846 ../src/guestfs-actions.pod:3050
+#: ../src/guestfs-actions.pod:3152 ../src/guestfs-actions.pod:3256
+#: ../src/guestfs-actions.pod:3275 ../src/guestfs-actions.pod:3490
+#: ../src/guestfs-actions.pod:3518 ../src/guestfs-actions.pod:3539
+#: ../src/guestfs-actions.pod:3573 ../src/guestfs-actions.pod:3636
+#: ../src/guestfs-actions.pod:3656 ../src/guestfs-actions.pod:3676
+#: ../src/guestfs-actions.pod:4303 ../src/guestfs-actions.pod:4650
+#: ../src/guestfs-actions.pod:4817 ../src/guestfs-actions.pod:4927
+#: ../src/guestfs-actions.pod:5820 ../src/guestfs-actions.pod:6021
+#: ../src/guestfs-actions.pod:6209 ../src/guestfs-actions.pod:6387
+#: ../src/guestfs-actions.pod:6436 ../src/guestfs-actions.pod:7096
+#: ../src/guestfs-actions.pod:7112 ../src/guestfs-actions.pod:7136
+#: ../src/guestfs-actions.pod:7160 ../src/guestfs-actions.pod:7834
+#: ../src/guestfs-actions.pod:7853 ../src/guestfs-actions.pod:7871
+#: ../src/guestfs-actions.pod:8045 ../src/guestfs-actions.pod:8359
+msgid ""
+"This function returns a string, or NULL on error. I<The caller must free "
+"the returned string after use>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:421
+msgid "guestfs_aug_init"
+msgstr "guestfs_aug_init"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:423
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_aug_init (guestfs_h *g,\n"
+" const char *root,\n"
+" int flags);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_aug_init (guestfs_h *g,\n"
+" const char *root,\n"
+" int flags);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:432
+msgid "You must call this before using any other C<guestfs_aug_*> commands."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:457
+msgid ""
+"This option is only useful when debugging Augeas lenses. Use of this option "
+"may require additional memory for the libguestfs appliance. You may need to "
+"set the C<LIBGUESTFS_MEMSIZE> environment variable or call "
+"C<guestfs_set_memsize>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:472
+msgid "Do not load the tree in C<guestfs_aug_init>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:476
+msgid "To close the handle, you can call C<guestfs_aug_close>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:484
+msgid "guestfs_aug_insert"
+msgstr "guestfs_aug_insert"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:486
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_aug_insert (guestfs_h *g,\n"
+" const char *augpath,\n"
+" const char *label,\n"
+" int before);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_aug_insert (guestfs_h *g,\n"
+" const char *augpath,\n"
+" const char *label,\n"
+" int before);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:504
+msgid "guestfs_aug_load"
+msgstr "guestfs_aug_load"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:506
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_aug_load (guestfs_h *g);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_aug_load (guestfs_h *g);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:518
+msgid "guestfs_aug_ls"
+msgstr "guestfs_aug_ls"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:520
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_aug_ls (guestfs_h *g,\n"
+" const char *augpath);\n"
+"\n"
+msgstr ""
+" char **\n"
+" guestfs_aug_ls (guestfs_h *g,\n"
+" const char *augpath);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:524
+msgid ""
+"This is just a shortcut for listing C<guestfs_aug_match> C<path/*> and "
+"sorting the resulting nodes into alphabetical order."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:527 ../src/guestfs-actions.pod:543
+#: ../src/guestfs-actions.pod:689 ../src/guestfs-actions.pod:1196
+#: ../src/guestfs-actions.pod:1851 ../src/guestfs-actions.pod:1870
+#: ../src/guestfs-actions.pod:1973 ../src/guestfs-actions.pod:1992
+#: ../src/guestfs-actions.pod:2238 ../src/guestfs-actions.pod:2704
+#: ../src/guestfs-actions.pod:2720 ../src/guestfs-actions.pod:2739
+#: ../src/guestfs-actions.pod:2804 ../src/guestfs-actions.pod:2828
+#: ../src/guestfs-actions.pod:2899 ../src/guestfs-actions.pod:2948
+#: ../src/guestfs-actions.pod:3217 ../src/guestfs-actions.pod:3592
+#: ../src/guestfs-actions.pod:3872 ../src/guestfs-actions.pod:4186
+#: ../src/guestfs-actions.pod:4203 ../src/guestfs-actions.pod:4223
+#: ../src/guestfs-actions.pod:4285 ../src/guestfs-actions.pod:4390
+#: ../src/guestfs-actions.pod:4789 ../src/guestfs-actions.pod:5546
+#: ../src/guestfs-actions.pod:6181 ../src/guestfs-actions.pod:6307
+#: ../src/guestfs-actions.pod:6421 ../src/guestfs-actions.pod:7176
+#: ../src/guestfs-actions.pod:7237 ../src/guestfs-actions.pod:7292
+#: ../src/guestfs-actions.pod:7438 ../src/guestfs-actions.pod:7462
+#: ../src/guestfs-actions.pod:7938 ../src/guestfs-actions.pod:7958
+#: ../src/guestfs-actions.pod:8005 ../src/guestfs-actions.pod:8199
+#: ../src/guestfs-actions.pod:8218 ../src/guestfs-actions.pod:8309
+#: ../src/guestfs-actions.pod:8328 ../src/guestfs-actions.pod:8374
+#: ../src/guestfs-actions.pod:8393
+msgid ""
+"This function returns a NULL-terminated array of strings (like L<environ(3)"
+">), or NULL if there was an error. I<The caller must free the strings and "
+"the array after use>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:531 ../src/guestfs-actions.pod:1121
+#: ../src/guestfs-actions.pod:1139 ../src/guestfs-actions.pod:1908
+#: ../src/guestfs-actions.pod:3950 ../src/guestfs-actions.pod:3981
+#: ../src/guestfs-actions.pod:4633 ../src/guestfs-actions.pod:4680
+#: ../src/guestfs-actions.pod:4867 ../src/guestfs-actions.pod:4900
+#: ../src/guestfs-actions.pod:5063 ../src/guestfs-actions.pod:5550
+#: ../src/guestfs-actions.pod:6122 ../src/guestfs-actions.pod:6519
+#: ../src/guestfs-actions.pod:6533 ../src/guestfs-actions.pod:6545
+#: ../src/guestfs-actions.pod:7023 ../src/guestfs-actions.pod:7676
+#: ../src/guestfs-actions.pod:7689 ../src/guestfs-actions.pod:7922
+#: ../src/guestfs-actions.pod:8187
+msgid "(Added in 0.8)"
+msgstr "(Додано у 0.8)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:533
+msgid "guestfs_aug_match"
+msgstr "guestfs_aug_match"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:535
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_aug_match (guestfs_h *g,\n"
+" const char *augpath);\n"
+"\n"
+msgstr ""
+" char **\n"
+" guestfs_aug_match (guestfs_h *g,\n"
+" const char *augpath);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:549
+msgid "guestfs_aug_mv"
+msgstr "guestfs_aug_mv"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:551
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_aug_mv (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_aug_mv (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:563
+msgid "guestfs_aug_rm"
+msgstr "guestfs_aug_rm"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:565
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_aug_rm (guestfs_h *g,\n"
+" const char *augpath);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_aug_rm (guestfs_h *g,\n"
+" const char *augpath);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:577
+msgid "guestfs_aug_save"
+msgstr "guestfs_aug_save"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:579
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_aug_save (guestfs_h *g);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_aug_save (guestfs_h *g);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:584
+msgid ""
+"The flags which were passed to C<guestfs_aug_init> affect exactly how files "
+"are saved."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:591
+msgid "guestfs_aug_set"
+msgstr "guestfs_aug_set"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:593
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_aug_set (guestfs_h *g,\n"
+" const char *augpath,\n"
+" const char *val);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_aug_set (guestfs_h *g,\n"
+" const char *augpath,\n"
+" const char *val);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:600
+msgid ""
+"In the Augeas API, it is possible to clear a node by setting the value to "
+"NULL. Due to an oversight in the libguestfs API you cannot do that with "
+"this call. Instead you must use the C<guestfs_aug_clear> call."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:609
+msgid "guestfs_available"
+msgstr "guestfs_available"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:611
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_available (guestfs_h *g,\n"
+" char *const *groups);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_available (guestfs_h *g,\n"
+" char *const *groups);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:619
+msgid ""
+"The libguestfs groups, and the functions that those groups correspond to, "
+"are listed in L<guestfs(3)/AVAILABILITY>. You can also fetch this list at "
+"runtime by calling C<guestfs_available_all_groups>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:643
+msgid "You must call C<guestfs_launch> before calling this function."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:665
+msgid ""
+"This call was added in version C<1.0.80>. In previous versions of "
+"libguestfs all you could do would be to speculatively execute a command to "
+"find out if the daemon implemented it. See also C<guestfs_version>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:674 ../src/guestfs-actions.pod:1653
+msgid "(Added in 1.0.80)"
+msgstr "(Додано у 1.0.80)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:676
+msgid "guestfs_available_all_groups"
+msgstr "guestfs_available_all_groups"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:678
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_available_all_groups (guestfs_h *g);\n"
+"\n"
+msgstr ""
+" char **\n"
+" guestfs_available_all_groups (guestfs_h *g);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:681
+msgid ""
+"This command returns a list of all optional groups that this daemon knows "
+"about. Note this returns both supported and unsupported groups. To find "
+"out which ones the daemon can actually support you have to call "
+"C<guestfs_available> on each member of the returned list."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:687
+msgid "See also C<guestfs_available> and L<guestfs(3)/AVAILABILITY>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:693
+msgid "(Added in 1.3.15)"
+msgstr "(Додано у 1.3.15)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:695
+msgid "guestfs_base64_in"
+msgstr "guestfs_base64_in"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:697
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_base64_in (guestfs_h *g,\n"
+" const char *base64file,\n"
+" const char *filename);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_base64_in (guestfs_h *g,\n"
+" const char *base64file,\n"
+" const char *filename);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:707 ../src/guestfs-actions.pod:721
+msgid "(Added in 1.3.5)"
+msgstr "(Додано у 1.3.5)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:709
+msgid "guestfs_base64_out"
+msgstr "guestfs_base64_out"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:711
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_base64_out (guestfs_h *g,\n"
+" const char *filename,\n"
+" const char *base64file);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_base64_out (guestfs_h *g,\n"
+" const char *filename,\n"
+" const char *base64file);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:723
+msgid "guestfs_blockdev_flushbufs"
+msgstr "guestfs_blockdev_flushbufs"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:725
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_blockdev_flushbufs (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_blockdev_flushbufs (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:736 ../src/guestfs-actions.pod:753
+#: ../src/guestfs-actions.pod:768 ../src/guestfs-actions.pod:784
+#: ../src/guestfs-actions.pod:802 ../src/guestfs-actions.pod:821
+#: ../src/guestfs-actions.pod:835 ../src/guestfs-actions.pod:853
+#: ../src/guestfs-actions.pod:867 ../src/guestfs-actions.pod:881
+msgid "(Added in 0.9.3)"
+msgstr "(Додано у 0.9.3)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:738
+msgid "guestfs_blockdev_getbsz"
+msgstr "guestfs_blockdev_getbsz"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:740
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_blockdev_getbsz (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_blockdev_getbsz (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:755
+msgid "guestfs_blockdev_getro"
+msgstr "guestfs_blockdev_getro"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:757
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_blockdev_getro (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_blockdev_getro (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:766 ../src/guestfs-actions.pod:1891
+#: ../src/guestfs-actions.pod:1906 ../src/guestfs-actions.pod:2395
+#: ../src/guestfs-actions.pod:2406 ../src/guestfs-actions.pod:2478
+#: ../src/guestfs-actions.pod:2504 ../src/guestfs-actions.pod:2544
+#: ../src/guestfs-actions.pod:2559 ../src/guestfs-actions.pod:2595
+#: ../src/guestfs-actions.pod:2618 ../src/guestfs-actions.pod:3693
+#: ../src/guestfs-actions.pod:3709 ../src/guestfs-actions.pod:3727
+#: ../src/guestfs-actions.pod:3889 ../src/guestfs-actions.pod:3903
+#: ../src/guestfs-actions.pod:3918 ../src/guestfs-actions.pod:3932
+#: ../src/guestfs-actions.pod:3948 ../src/guestfs-actions.pod:3963
+#: ../src/guestfs-actions.pod:3979 ../src/guestfs-actions.pod:3993
+#: ../src/guestfs-actions.pod:4006 ../src/guestfs-actions.pod:4020
+#: ../src/guestfs-actions.pod:4035 ../src/guestfs-actions.pod:4050
+#: ../src/guestfs-actions.pod:4063 ../src/guestfs-actions.pod:4077
+#: ../src/guestfs-actions.pod:5784
+msgid "This function returns a C truth value on success or -1 on error."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:770
+msgid "guestfs_blockdev_getsize64"
+msgstr "guestfs_blockdev_getsize64"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:772
+#, no-wrap
+msgid ""
+" int64_t\n"
+" guestfs_blockdev_getsize64 (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int64_t\n"
+" guestfs_blockdev_getsize64 (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:778
+msgid "See also C<guestfs_blockdev_getsz>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:786
+msgid "guestfs_blockdev_getss"
+msgstr "guestfs_blockdev_getss"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:788
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_blockdev_getss (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_blockdev_getss (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:795
+msgid ""
+"(Note, this is not the size in sectors, use C<guestfs_blockdev_getsz> for "
+"that)."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:804
+msgid "guestfs_blockdev_getsz"
+msgstr "guestfs_blockdev_getsz"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:806
+#, no-wrap
+msgid ""
+" int64_t\n"
+" guestfs_blockdev_getsz (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int64_t\n"
+" guestfs_blockdev_getsz (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:813
+msgid ""
+"See also C<guestfs_blockdev_getss> for the real sector size of the device, "
+"and C<guestfs_blockdev_getsize64> for the more useful I<size in bytes>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:823
+msgid "guestfs_blockdev_rereadpt"
+msgstr "guestfs_blockdev_rereadpt"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:825
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_blockdev_rereadpt (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_blockdev_rereadpt (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:837
+msgid "guestfs_blockdev_setbsz"
+msgstr "guestfs_blockdev_setbsz"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:839
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_blockdev_setbsz (guestfs_h *g,\n"
+" const char *device,\n"
+" int blocksize);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_blockdev_setbsz (guestfs_h *g,\n"
+" const char *device,\n"
+" int blocksize);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:855
+msgid "guestfs_blockdev_setro"
+msgstr "guestfs_blockdev_setro"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:857
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_blockdev_setro (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_blockdev_setro (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:869
+msgid "guestfs_blockdev_setrw"
+msgstr "guestfs_blockdev_setrw"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:871
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_blockdev_setrw (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_blockdev_setrw (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:883
+msgid "guestfs_btrfs_filesystem_resize"
+msgstr "guestfs_btrfs_filesystem_resize"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:885
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_btrfs_filesystem_resize (guestfs_h *g,\n"
+" const char *mountpoint,\n"
+" ...);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_btrfs_filesystem_resize (guestfs_h *g,\n"
+" const char *mountpoint,\n"
+" ...);\n"
+"\n"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:895
+#, no-wrap
+msgid ""
+" GUESTFS_BTRFS_FILESYSTEM_RESIZE_SIZE, int64_t size,\n"
+"\n"
+msgstr ""
+" GUESTFS_BTRFS_FILESYSTEM_RESIZE_SIZE, int64_t size,\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:918
+msgid "(Added in 1.11.17)"
+msgstr "(Додано у 1.11.17)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:920
+msgid "guestfs_btrfs_filesystem_resize_va"
+msgstr "guestfs_btrfs_filesystem_resize_va"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:922
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_btrfs_filesystem_resize_va (guestfs_h *g,\n"
+" const char *mountpoint,\n"
+" va_list args);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_btrfs_filesystem_resize_va (guestfs_h *g,\n"
+" const char *mountpoint,\n"
+" va_list args);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:927
+msgid "This is the \"va_list variant\" of L</guestfs_btrfs_filesystem_resize>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:931
+msgid "guestfs_btrfs_filesystem_resize_argv"
+msgstr "guestfs_btrfs_filesystem_resize_argv"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:933
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_btrfs_filesystem_resize_argv (guestfs_h *g,\n"
+" const char *mountpoint,\n"
+" const struct guestfs_btrfs_filesystem_resize_argv *optargs);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_btrfs_filesystem_resize_argv (guestfs_h *g,\n"
+" const char *mountpoint,\n"
+" const struct guestfs_btrfs_filesystem_resize_argv *optargs);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:938
+msgid "This is the \"argv variant\" of L</guestfs_btrfs_filesystem_resize>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:942
+msgid "guestfs_case_sensitive_path"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:944
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_case_sensitive_path (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:970
+msgid ""
+"Thus C<guestfs_case_sensitive_path> (\"/Windows/System32\") might return C<"
+"\"/WINDOWS/system32\"> (the exact return value would depend on details of "
+"how the directories were originally created under Windows)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:978
+msgid "See also C<guestfs_realpath>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:983 ../src/guestfs-actions.pod:7856
+msgid "(Added in 1.0.75)"
+msgstr "(Додано у 1.0.75)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:985
+msgid "guestfs_cat"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:987
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_cat (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:993
+msgid ""
+"Note that this function cannot correctly handle binary files (specifically, "
+"files containing C<\\0> character which is treated as end of string). For "
+"those you need to use the C<guestfs_read_file> or C<guestfs_download> "
+"functions which have a more complex interface."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1004 ../src/guestfs-actions.pod:4207
+#: ../src/guestfs-actions.pod:4289 ../src/guestfs-actions.pod:4306
+#: ../src/guestfs-actions.pod:4394 ../src/guestfs-actions.pod:4793
+#: ../src/guestfs-actions.pod:4807 ../src/guestfs-actions.pod:6185
+#: ../src/guestfs-actions.pod:6199 ../src/guestfs-actions.pod:8009
+#: ../src/guestfs-actions.pod:8023
+msgid "(Added in 0.4)"
+msgstr "(Додано у 0.4)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1006
+msgid "guestfs_checksum"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1008
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_checksum (guestfs_h *g,\n"
+" const char *csumtype,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1054
+msgid "To get the checksum for a device, use C<guestfs_checksum_device>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1056
+msgid "To get the checksums for many files, use C<guestfs_checksums_out>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1061 ../src/guestfs-actions.pod:1728
+#: ../src/guestfs-actions.pod:2586 ../src/guestfs-actions.pod:3905
+#: ../src/guestfs-actions.pod:3934 ../src/guestfs-actions.pod:3995
+#: ../src/guestfs-actions.pod:4022 ../src/guestfs-actions.pod:7712
+msgid "(Added in 1.0.2)"
+msgstr "(Додано у 1.0.2)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1063
+msgid "guestfs_checksum_device"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1065
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_checksum_device (guestfs_h *g,\n"
+" const char *csumtype,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1070
+msgid ""
+"This call computes the MD5, SHAx or CRC checksum of the contents of the "
+"device named C<device>. For the types of checksums supported see the "
+"C<guestfs_checksum> command."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1077 ../src/guestfs-actions.pod:5617
+#: ../src/guestfs-actions.pod:5752 ../src/guestfs-actions.pod:5786
+#: ../src/guestfs-actions.pod:5804 ../src/guestfs-actions.pod:5986
+#: ../src/guestfs-actions.pod:7621 ../src/guestfs-actions.pod:7635
+#: ../src/guestfs-actions.pod:8035
+msgid "(Added in 1.3.2)"
+msgstr "(Додано у 1.3.2)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1079
+msgid "guestfs_checksums_out"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1081
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_checksums_out (guestfs_h *g,\n"
+" const char *csumtype,\n"
+" const char *directory,\n"
+" const char *sumsfile);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1101
+msgid "(Added in 1.3.7)"
+msgstr "(Додано у 1.3.7)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1103
+msgid "guestfs_chmod"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1105
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_chmod (guestfs_h *g,\n"
+" int mode,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1123
+msgid "guestfs_chown"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1125
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_chown (guestfs_h *g,\n"
+" int owner,\n"
+" int group,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1141
+msgid "guestfs_command"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1143
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_command (guestfs_h *g,\n"
+" char *const *arguments);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1152
+msgid ""
+"The single parameter is an argv-style list of arguments. The first element "
+"is the name of the program to run. Subsequent elements are parameters. The "
+"list must be non-empty (ie. must contain a program name). Note that the "
+"command runs directly, and is I<not> invoked via the shell (see "
+"C<guestfs_sh>)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1183 ../src/guestfs-actions.pod:1203
+#: ../src/guestfs-actions.pod:2027
+msgid "(Added in 0.9.1)"
+msgstr "(Додано у 0.9.1)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1185
+msgid "guestfs_command_lines"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1187
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_command_lines (guestfs_h *g,\n"
+" char *const *arguments);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1191
+msgid ""
+"This is the same as C<guestfs_command>, but splits the result into a list of "
+"lines."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1194
+msgid "See also: C<guestfs_sh_lines>"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1205
+msgid "guestfs_compress_device_out"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1207
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_compress_device_out (guestfs_h *g,\n"
+" const char *ctype,\n"
+" const char *device,\n"
+" const char *zdevice,\n"
+" ...);\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1219
+#, no-wrap
+msgid ""
+" GUESTFS_COMPRESS_DEVICE_OUT_LEVEL, int level,\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1224
+msgid ""
+"The C<ctype> and optional C<level> parameters have the same meaning as in "
+"C<guestfs_compress_out>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1229 ../src/guestfs-actions.pod:1288
+#: ../src/guestfs-actions.pod:2572 ../src/guestfs-actions.pod:6902
+msgid "(Added in 1.13.15)"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1231
+msgid "guestfs_compress_device_out_va"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1233
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_compress_device_out_va (guestfs_h *g,\n"
+" const char *ctype,\n"
+" const char *device,\n"
+" const char *zdevice,\n"
+" va_list args);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1240
+msgid "This is the \"va_list variant\" of L</guestfs_compress_device_out>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1244
+msgid "guestfs_compress_device_out_argv"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1246
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_compress_device_out_argv (guestfs_h *g,\n"
+" const char *ctype,\n"
+" const char *device,\n"
+" const char *zdevice,\n"
+" const struct guestfs_compress_device_out_argv *optargs);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1253
+msgid "This is the \"argv variant\" of L</guestfs_compress_device_out>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1257
+msgid "guestfs_compress_out"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1259
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_compress_out (guestfs_h *g,\n"
+" const char *ctype,\n"
+" const char *file,\n"
+" const char *zfile,\n"
+" ...);\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1271
+#, no-wrap
+msgid ""
+" GUESTFS_COMPRESS_OUT_LEVEL, int level,\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1290
+msgid "guestfs_compress_out_va"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1292
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_compress_out_va (guestfs_h *g,\n"
+" const char *ctype,\n"
+" const char *file,\n"
+" const char *zfile,\n"
+" va_list args);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1299
+msgid "This is the \"va_list variant\" of L</guestfs_compress_out>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1303
+msgid "guestfs_compress_out_argv"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1305
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_compress_out_argv (guestfs_h *g,\n"
+" const char *ctype,\n"
+" const char *file,\n"
+" const char *zfile,\n"
+" const struct guestfs_compress_out_argv *optargs);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1312
+msgid "This is the \"argv variant\" of L</guestfs_compress_out>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1316
+msgid "guestfs_config"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1318
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_config (guestfs_h *g,\n"
+" const char *qemuparam,\n"
+" const char *qemuvalue);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1336
+msgid "guestfs_copy_device_to_device"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1338
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_device_to_device (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" ...);\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1349
+#, no-wrap
+msgid ""
+" GUESTFS_COPY_DEVICE_TO_DEVICE_SRCOFFSET, int64_t srcoffset,\n"
+" GUESTFS_COPY_DEVICE_TO_DEVICE_DESTOFFSET, int64_t destoffset,\n"
+" GUESTFS_COPY_DEVICE_TO_DEVICE_SIZE, int64_t size,\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1353
+msgid ""
+"The four calls C<guestfs_copy_device_to_device>, "
+"C<guestfs_copy_device_to_file>, C<guestfs_copy_file_to_device>, and "
+"C<guestfs_copy_file_to_file> let you copy from a source (device|file) to a "
+"destination (device|file)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1374 ../src/guestfs-actions.pod:1427
+#: ../src/guestfs-actions.pod:1480 ../src/guestfs-actions.pod:1538
+#: ../src/guestfs-actions.pod:1592 ../src/guestfs-actions.pod:1723
+#: ../src/guestfs-actions.pod:1754 ../src/guestfs-actions.pod:1799
+#: ../src/guestfs-actions.pod:2176 ../src/guestfs-actions.pod:2198
+#: ../src/guestfs-actions.pod:4105 ../src/guestfs-actions.pod:7707
+#: ../src/guestfs-actions.pod:7741 ../src/guestfs-actions.pod:8248
+#: ../src/guestfs-actions.pod:8271
+msgid ""
+"This long-running command can generate progress notification messages so "
+"that the caller can display a progress bar or indicator. To receive these "
+"messages, the caller must register a progress event callback. See L<guestfs"
+"(3)/GUESTFS_EVENT_PROGRESS>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1379 ../src/guestfs-actions.pod:1432
+#: ../src/guestfs-actions.pod:1485 ../src/guestfs-actions.pod:1543
+#: ../src/guestfs-actions.pod:6042
+#, fuzzy
+#| msgid "(Added in 1.3.5)"
+msgid "(Added in 1.13.25)"
+msgstr "(Додано у 1.3.5)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1381
+msgid "guestfs_copy_device_to_device_va"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1383
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_device_to_device_va (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" va_list args);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1389
+msgid "This is the \"va_list variant\" of L</guestfs_copy_device_to_device>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1393
+msgid "guestfs_copy_device_to_device_argv"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1395
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_device_to_device_argv (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" const struct guestfs_copy_device_to_device_argv *optargs);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1401
+msgid "This is the \"argv variant\" of L</guestfs_copy_device_to_device>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1405
+msgid "guestfs_copy_device_to_file"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1407
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_device_to_file (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" ...);\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1418
+#, no-wrap
+msgid ""
+" GUESTFS_COPY_DEVICE_TO_FILE_SRCOFFSET, int64_t srcoffset,\n"
+" GUESTFS_COPY_DEVICE_TO_FILE_DESTOFFSET, int64_t destoffset,\n"
+" GUESTFS_COPY_DEVICE_TO_FILE_SIZE, int64_t size,\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1422 ../src/guestfs-actions.pod:1475
+#: ../src/guestfs-actions.pod:1528
+msgid ""
+"See C<guestfs_copy_device_to_device> for a general overview of this call."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1434
+msgid "guestfs_copy_device_to_file_va"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1436
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_device_to_file_va (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" va_list args);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1442
+msgid "This is the \"va_list variant\" of L</guestfs_copy_device_to_file>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1446
+msgid "guestfs_copy_device_to_file_argv"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1448
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_device_to_file_argv (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" const struct guestfs_copy_device_to_file_argv *optargs);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1454
+msgid "This is the \"argv variant\" of L</guestfs_copy_device_to_file>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1458
+msgid "guestfs_copy_file_to_device"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1460
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_file_to_device (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" ...);\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1471
+#, no-wrap
+msgid ""
+" GUESTFS_COPY_FILE_TO_DEVICE_SRCOFFSET, int64_t srcoffset,\n"
+" GUESTFS_COPY_FILE_TO_DEVICE_DESTOFFSET, int64_t destoffset,\n"
+" GUESTFS_COPY_FILE_TO_DEVICE_SIZE, int64_t size,\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1487
+msgid "guestfs_copy_file_to_device_va"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1489
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_file_to_device_va (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" va_list args);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1495
+msgid "This is the \"va_list variant\" of L</guestfs_copy_file_to_device>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1499
+msgid "guestfs_copy_file_to_device_argv"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1501
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_file_to_device_argv (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" const struct guestfs_copy_file_to_device_argv *optargs);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1507
+msgid "This is the \"argv variant\" of L</guestfs_copy_file_to_device>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1511
+msgid "guestfs_copy_file_to_file"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1513
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_file_to_file (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" ...);\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1524
+#, no-wrap
+msgid ""
+" GUESTFS_COPY_FILE_TO_FILE_SRCOFFSET, int64_t srcoffset,\n"
+" GUESTFS_COPY_FILE_TO_FILE_DESTOFFSET, int64_t destoffset,\n"
+" GUESTFS_COPY_FILE_TO_FILE_SIZE, int64_t size,\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1531
+msgid ""
+"This is B<not> the function you want for copying files. This is for copying "
+"blocks within existing files. See C<guestfs_cp>, C<guestfs_cp_a> and "
+"C<guestfs_mv> for general file copying and moving functions."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1545
+msgid "guestfs_copy_file_to_file_va"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1547
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_file_to_file_va (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" va_list args);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1553
+msgid "This is the \"va_list variant\" of L</guestfs_copy_file_to_file>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1557
+msgid "guestfs_copy_file_to_file_argv"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1559
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_file_to_file_argv (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" const struct guestfs_copy_file_to_file_argv *optargs);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1565
+msgid "This is the \"argv variant\" of L</guestfs_copy_file_to_file>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1569
+msgid "guestfs_copy_size"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1571
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_copy_size (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest,\n"
+" int64_t size);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1577 ../src/guestfs-actions.pod:1634
+msgid ""
+"I<This function is deprecated.> In new code, use the L</"
+"guestfs_copy_device_to_device> call instead."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1597 ../src/guestfs-actions.pod:4820
+#: ../src/guestfs-actions.pod:6212 ../src/guestfs-actions.pod:7942
+#: ../src/guestfs-actions.pod:7962 ../src/guestfs-actions.pod:8048
+msgid "(Added in 1.0.87)"
+msgstr "(Додано у 1.0.87)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1599
+msgid "guestfs_cp"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1601
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_cp (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1611 ../src/guestfs-actions.pod:1625
+#: ../src/guestfs-actions.pod:1705 ../src/guestfs-actions.pod:1779
+#: ../src/guestfs-actions.pod:1893 ../src/guestfs-actions.pod:5564
+#: ../src/guestfs-actions.pod:6056
+msgid "(Added in 1.0.18)"
+msgstr "(Додано у 1.0.18)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1613
+msgid "guestfs_cp_a"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1615
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_cp_a (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1627
+msgid "guestfs_dd"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1629
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_dd (guestfs_h *g,\n"
+" const char *src,\n"
+" const char *dest);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1646
+msgid ""
+"If the destination is a device, it must be as large or larger than the "
+"source file or device, otherwise the copy will fail. This command cannot do "
+"partial copies (see C<guestfs_copy_device_to_device>)."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1655
+msgid "guestfs_df"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1657
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_df (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1662 ../src/guestfs-actions.pod:1679
+msgid ""
+"This command is mostly useful for interactive sessions. It is I<not> "
+"intended that you try to parse the output string. Use C<guestfs_statvfs> "
+"from programs."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1669 ../src/guestfs-actions.pod:1686
+#: ../src/guestfs-actions.pod:1804 ../src/guestfs-actions.pod:2811
+#: ../src/guestfs-actions.pod:2835 ../src/guestfs-actions.pod:2903
+#: ../src/guestfs-actions.pod:4930 ../src/guestfs-actions.pod:5464
+#: ../src/guestfs-actions.pod:7445 ../src/guestfs-actions.pod:7469
+#: ../src/guestfs-actions.pod:8088 ../src/guestfs-actions.pod:8101
+#: ../src/guestfs-actions.pod:8114
+msgid "(Added in 1.0.54)"
+msgstr "(Додано у 1.0.54)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1671
+msgid "guestfs_df_h"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1673
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_df_h (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1688
+msgid "guestfs_dmesg"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1690
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_dmesg (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1697
+msgid ""
+"Another way to get the same information is to enable verbose messages with "
+"C<guestfs_set_verbose> or by setting the environment variable "
+"C<LIBGUESTFS_DEBUG=1> before running the program."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1707
+msgid "guestfs_download"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1709
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_download (guestfs_h *g,\n"
+" const char *remotefilename,\n"
+" const char *filename);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1719
+msgid "See also C<guestfs_upload>, C<guestfs_cat>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1730
+msgid "guestfs_download_offset"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1732
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_download_offset (guestfs_h *g,\n"
+" const char *remotefilename,\n"
+" const char *filename,\n"
+" int64_t offset,\n"
+" int64_t size);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1745
+msgid ""
+"Note that there is no limit on the amount of data that can be downloaded "
+"with this call, unlike with C<guestfs_pread>, and this call always reads the "
+"full amount unless an error occurs."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1750
+msgid "See also C<guestfs_download>, C<guestfs_pread>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1759 ../src/guestfs-actions.pod:7746
+msgid "(Added in 1.5.17)"
+msgstr "(Додано у 1.5.17)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1761
+msgid "guestfs_drop_caches"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1763
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_drop_caches (guestfs_h *g,\n"
+" int whattodrop);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1781
+msgid "guestfs_du"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1783
+#, no-wrap
+msgid ""
+" int64_t\n"
+" guestfs_du (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1806
+msgid "guestfs_e2fsck_f"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1808
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_e2fsck_f (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1816
+msgid ""
+"This command is only needed because of C<guestfs_resize2fs> (q.v.). "
+"Normally you should use C<guestfs_fsck>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1821
+msgid "(Added in 1.0.29)"
+msgstr "(Додано у 1.0.29)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1823
+msgid "guestfs_echo_daemon"
+msgstr "guestfs_echo_daemon"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1825
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_echo_daemon (guestfs_h *g,\n"
+" char *const *words);\n"
+"\n"
+msgstr ""
+" char *\n"
+" guestfs_echo_daemon (guestfs_h *g,\n"
+" char *const *words);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1834
+msgid "See also C<guestfs_ping_daemon>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1839 ../src/guestfs-actions.pod:2597
+#: ../src/guestfs-actions.pod:6926
+msgid "(Added in 1.0.69)"
+msgstr "(Додано у 1.0.69)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1841
+msgid "guestfs_egrep"
+msgstr "guestfs_egrep"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1843
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_egrep (guestfs_h *g,\n"
+" const char *regex,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+" char **\n"
+" guestfs_egrep (guestfs_h *g,\n"
+" const char *regex,\n"
+" const char *path);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1858 ../src/guestfs-actions.pod:1877
+#: ../src/guestfs-actions.pod:1934 ../src/guestfs-actions.pod:1980
+#: ../src/guestfs-actions.pod:1999 ../src/guestfs-actions.pod:2727
+#: ../src/guestfs-actions.pod:2746 ../src/guestfs-actions.pod:2924
+#: ../src/guestfs-actions.pod:2937 ../src/guestfs-actions.pod:2952
+#: ../src/guestfs-actions.pod:2998 ../src/guestfs-actions.pod:3020
+#: ../src/guestfs-actions.pod:3033 ../src/guestfs-actions.pod:4319
+#: ../src/guestfs-actions.pod:4333 ../src/guestfs-actions.pod:4346
+#: ../src/guestfs-actions.pod:4360 ../src/guestfs-actions.pod:5352
+#: ../src/guestfs-actions.pod:6390 ../src/guestfs-actions.pod:6439
+#: ../src/guestfs-actions.pod:7313 ../src/guestfs-actions.pod:7325
+#: ../src/guestfs-actions.pod:7338 ../src/guestfs-actions.pod:7351
+#: ../src/guestfs-actions.pod:7373 ../src/guestfs-actions.pod:7386
+#: ../src/guestfs-actions.pod:7399 ../src/guestfs-actions.pod:7412
+#: ../src/guestfs-actions.pod:8206 ../src/guestfs-actions.pod:8225
+#: ../src/guestfs-actions.pod:8316 ../src/guestfs-actions.pod:8335
+#: ../src/guestfs-actions.pod:8381 ../src/guestfs-actions.pod:8400
+msgid "(Added in 1.0.66)"
+msgstr "(Додано у 1.0.66)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1860
+msgid "guestfs_egrepi"
+msgstr "guestfs_egrepi"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1862
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_egrepi (guestfs_h *g,\n"
+" const char *regex,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1879
+msgid "guestfs_equal"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1881
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_equal (guestfs_h *g,\n"
+" const char *file1,\n"
+" const char *file2);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1895
+msgid "guestfs_exists"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1897
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_exists (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1904
+msgid "See also C<guestfs_is_file>, C<guestfs_is_dir>, C<guestfs_stat>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1910
+msgid "guestfs_fallocate"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1912
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_fallocate (guestfs_h *g,\n"
+" const char *path,\n"
+" int len);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1917
+msgid ""
+"I<This function is deprecated.> In new code, use the L</guestfs_fallocate64> "
+"call instead."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1936
+msgid "guestfs_fallocate64"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1938
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_fallocate64 (guestfs_h *g,\n"
+" const char *path,\n"
+" int64_t len);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1947
+msgid ""
+"Note that this call allocates disk blocks for the file. To create a sparse "
+"file use C<guestfs_truncate_size> instead."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1950
+msgid ""
+"The deprecated call C<guestfs_fallocate> does the same, but owing to an "
+"oversight it only allowed 30 bit lengths to be specified, effectively "
+"limiting the maximum size of files created through that call to 1GB."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:1961
+msgid "(Added in 1.3.17)"
+msgstr "(Додано у 1.3.17)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1963
+msgid "guestfs_fgrep"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1965
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_fgrep (guestfs_h *g,\n"
+" const char *pattern,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:1982
+msgid "guestfs_fgrepi"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:1984
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_fgrepi (guestfs_h *g,\n"
+" const char *pattern,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2001
+msgid "guestfs_file"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2003
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_file (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2021
+msgid ""
+"See also: L<file(1)>, C<guestfs_vfs_type>, C<guestfs_lstat>, "
+"C<guestfs_is_file>, C<guestfs_is_blockdev> (etc), C<guestfs_is_zero>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2029
+msgid "guestfs_file_architecture"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2031
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_file_architecture (guestfs_h *g,\n"
+" const char *filename);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2139 ../src/guestfs-actions.pod:2302
+#: ../src/guestfs-actions.pod:2319 ../src/guestfs-actions.pod:3053
+#: ../src/guestfs-actions.pod:3155 ../src/guestfs-actions.pod:3221
+#: ../src/guestfs-actions.pod:3408 ../src/guestfs-actions.pod:3426
+#: ../src/guestfs-actions.pod:3466 ../src/guestfs-actions.pod:3542
+#: ../src/guestfs-actions.pod:3639 ../src/guestfs-actions.pod:3876
+#: ../src/guestfs-actions.pod:4008
+msgid "(Added in 1.5.3)"
+msgstr "(Додано у 1.5.3)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2141
+msgid "guestfs_filesize"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2143
+#, no-wrap
+msgid ""
+" int64_t\n"
+" guestfs_filesize (guestfs_h *g,\n"
+" const char *file);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2149
+msgid ""
+"To get other stats about a file, use C<guestfs_stat>, C<guestfs_lstat>, "
+"C<guestfs_is_dir>, C<guestfs_is_file> etc. To get the size of block "
+"devices, use C<guestfs_blockdev_getsize64>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2155
+msgid "(Added in 1.0.82)"
+msgstr "(Додано у 1.0.82)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2157
+msgid "guestfs_fill"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2159
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_fill (guestfs_h *g,\n"
+" int c,\n"
+" int len,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2169
+msgid ""
+"To fill a file with zero bytes (sparsely), it is much more efficient to use "
+"C<guestfs_truncate_size>. To create a file with a pattern of repeating "
+"bytes use C<guestfs_fill_pattern>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2181
+msgid "(Added in 1.0.79)"
+msgstr "(Додано у 1.0.79)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2183
+msgid "guestfs_fill_pattern"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2185
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_fill_pattern (guestfs_h *g,\n"
+" const char *pattern,\n"
+" int len,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2191
+msgid ""
+"This function is like C<guestfs_fill> except that it creates a new file of "
+"length C<len> containing the repeating pattern of bytes in C<pattern>. The "
+"pattern is truncated if necessary to ensure the length of the file is "
+"exactly C<len> bytes."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2203
+msgid "(Added in 1.3.12)"
+msgstr "(Додано у 1.3.12)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2205
+msgid "guestfs_find"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2207
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_find (guestfs_h *g,\n"
+" const char *directory);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2223
+msgid ""
+"then the returned list from C<guestfs_find> C</tmp> would be 4 elements:"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2236
+msgid "See also C<guestfs_find0>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2245 ../src/guestfs-actions.pod:4757
+#: ../src/guestfs-actions.pod:6474
+msgid "(Added in 1.0.27)"
+msgstr "(Додано у 1.0.27)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2247
+msgid "guestfs_find0"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2249
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_find0 (guestfs_h *g,\n"
+" const char *directory,\n"
+" const char *files);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2258
+msgid ""
+"This command works the same way as C<guestfs_find> with the following "
+"exceptions:"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2285
+msgid "(Added in 1.0.74)"
+msgstr "(Додано у 1.0.74)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2287
+msgid "guestfs_findfs_label"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2289
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_findfs_label (guestfs_h *g,\n"
+" const char *label);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2297
+msgid "To find the label of a filesystem, use C<guestfs_vfs_label>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2304
+msgid "guestfs_findfs_uuid"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2306
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_findfs_uuid (guestfs_h *g,\n"
+" const char *uuid);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2314
+msgid "To find the UUID of a filesystem, use C<guestfs_vfs_uuid>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2321
+msgid "guestfs_fsck"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2323
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_fsck (guestfs_h *g,\n"
+" const char *fstype,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2358 ../src/guestfs-actions.pod:8253
+msgid "(Added in 1.0.16)"
+msgstr "(Додано у 1.0.16)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2360
+msgid "guestfs_get_append"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2362
+#, no-wrap
+msgid ""
+" const char *\n"
+" guestfs_get_append (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2370
+msgid ""
+"This function returns a string which may be NULL. There is no way to return "
+"an error from this function. The string is owned by the guest handle and "
+"must I<not> be freed."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2374 ../src/guestfs-actions.pod:6152
+#: ../src/guestfs-actions.pod:6631 ../src/guestfs-actions.pod:7080
+#: ../src/guestfs-actions.pod:7099 ../src/guestfs-actions.pod:7115
+#: ../src/guestfs-actions.pod:7139 ../src/guestfs-actions.pod:7893
+#: ../src/guestfs-actions.pod:7908 ../src/guestfs-actions.pod:8297
+msgid "(Added in 1.0.26)"
+msgstr "(Додано у 1.0.26)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2376
+msgid "guestfs_get_attach_method"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2378
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_get_attach_method (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2381
+msgid "Return the current attach method. See C<guestfs_set_attach_method>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2386 ../src/guestfs-actions.pod:6661
+msgid "(Added in 1.9.8)"
+msgstr "(Додано у 1.9.8)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2388
+msgid "guestfs_get_autosync"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2390
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_autosync (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2399
+msgid "guestfs_get_direct"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2401
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_direct (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2408 ../src/guestfs-actions.pod:6702
+msgid "(Added in 1.0.72)"
+msgstr "(Додано у 1.0.72)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2410
+msgid "guestfs_get_e2label"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2412
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_get_e2label (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2416
+msgid ""
+"I<This function is deprecated.> In new code, use the L</guestfs_vfs_label> "
+"call instead."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2429 ../src/guestfs-actions.pod:2450
+#: ../src/guestfs-actions.pod:6720 ../src/guestfs-actions.pod:6739
+msgid "(Added in 1.0.15)"
+msgstr "(Додано у 1.0.15)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2431
+msgid "guestfs_get_e2uuid"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2433
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_get_e2uuid (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2437
+msgid ""
+"I<This function is deprecated.> In new code, use the L</guestfs_vfs_uuid> "
+"call instead."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2452
+msgid "guestfs_get_memsize"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2454
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_memsize (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2460
+msgid ""
+"If C<guestfs_set_memsize> was not called on this handle, and if "
+"C<LIBGUESTFS_MEMSIZE> was not set, then this returns the compiled-in default "
+"value for memsize."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2469 ../src/guestfs-actions.pod:5048
+#: ../src/guestfs-actions.pod:5257 ../src/guestfs-actions.pod:5276
+#: ../src/guestfs-actions.pod:5295 ../src/guestfs-actions.pod:5307
+#: ../src/guestfs-actions.pod:5324 ../src/guestfs-actions.pod:5337
+#: ../src/guestfs-actions.pod:6377 ../src/guestfs-actions.pod:6760
+#: ../src/guestfs-actions.pod:7050 ../src/guestfs-actions.pod:7662
+msgid "(Added in 1.0.55)"
+msgstr "(Додано у 1.0.55)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2471
+msgid "guestfs_get_network"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2473
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_network (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2480 ../src/guestfs-actions.pod:6779
+msgid "(Added in 1.5.4)"
+msgstr "(Додано у 1.5.4)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2482
+msgid "guestfs_get_path"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2484
+#, no-wrap
+msgid ""
+" const char *\n"
+" guestfs_get_path (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2492 ../src/guestfs-actions.pod:2532
+msgid ""
+"This function returns a string, or NULL on error. The string is owned by "
+"the guest handle and must I<not> be freed."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2497
+msgid "guestfs_get_pgroup"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2499
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_pgroup (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2506 ../src/guestfs-actions.pod:6815
+#: ../src/guestfs-actions.pod:8154
+msgid "(Added in 1.11.18)"
+msgstr "(Додано у 1.11.18)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2508
+msgid "guestfs_get_pid"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2510
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_pid (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2520
+msgid "(Added in 1.0.56)"
+msgstr "(Додано у 1.0.56)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2522
+msgid "guestfs_get_qemu"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2524
+#, no-wrap
+msgid ""
+" const char *\n"
+" guestfs_get_qemu (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2535 ../src/guestfs-actions.pod:6843
+msgid "(Added in 1.0.6)"
+msgstr "(Додано у 1.0.6)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2537
+msgid "guestfs_get_recovery_proc"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2539
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_recovery_proc (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2546 ../src/guestfs-actions.pod:4130
+#: ../src/guestfs-actions.pod:4461 ../src/guestfs-actions.pod:4855
+#: ../src/guestfs-actions.pod:4887 ../src/guestfs-actions.pod:6082
+#: ../src/guestfs-actions.pod:6425 ../src/guestfs-actions.pod:6867
+#: ../src/guestfs-actions.pod:7565 ../src/guestfs-actions.pod:7585
+#: ../src/guestfs-actions.pod:7777
+msgid "(Added in 1.0.77)"
+msgstr "(Додано у 1.0.77)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2548
+msgid "guestfs_get_selinux"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2550
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_selinux (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2553
+msgid ""
+"This returns the current setting of the selinux flag which is passed to the "
+"appliance at boot time. See C<guestfs_set_selinux>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2561 ../src/guestfs-actions.pod:2635
+#: ../src/guestfs-actions.pod:6886 ../src/guestfs-actions.pod:6960
+msgid "(Added in 1.0.67)"
+msgstr "(Додано у 1.0.67)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2563
+msgid "guestfs_get_smp"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2565
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_smp (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2574
+msgid "guestfs_get_state"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2576
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_state (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2588
+msgid "guestfs_get_trace"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2590
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_trace (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2599
+msgid "guestfs_get_umask"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2601
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_umask (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2604
+msgid ""
+"Return the current umask. By default the umask is C<022> unless it has been "
+"set by calling C<guestfs_umask>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2611
+msgid "guestfs_get_verbose"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2613
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_get_verbose (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2622
+msgid "guestfs_getcon"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2624
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_getcon (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2629
+msgid ""
+"See the documentation about SELINUX in L<guestfs(3)>, and C<guestfs_setcon>"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2637
+msgid "guestfs_getxattr"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2639
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_getxattr (guestfs_h *g,\n"
+" const char *path,\n"
+" const char *name,\n"
+" size_t *size_r);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2645
+msgid ""
+"Get a single extended attribute from file C<path> named C<name>. This call "
+"follows symlinks. If you want to lookup an extended attribute for the "
+"symlink itself, use C<guestfs_lgetxattr>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2649 ../src/guestfs-actions.pod:4144
+msgid ""
+"Normally it is better to get all extended attributes from a file in one go "
+"by calling C<guestfs_getxattrs>. However some Linux filesystem "
+"implementations are buggy and do not provide a way to list out attributes. "
+"For these filesystems (notably ntfs-3g) you have to know the names of the "
+"extended attributes you want in advance and call this function."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2659
+msgid "See also: C<guestfs_getxattrs>, C<guestfs_lgetxattr>, L<attr(5)>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2661 ../src/guestfs-actions.pod:2874
+#: ../src/guestfs-actions.pod:3356 ../src/guestfs-actions.pod:4156
+#: ../src/guestfs-actions.pod:6075 ../src/guestfs-actions.pod:6101
+#: ../src/guestfs-actions.pod:6282
+msgid ""
+"This function returns a buffer, or NULL on error. The size of the returned "
+"buffer is written to C<*size_r>. I<The caller must free the returned buffer "
+"after use>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2665 ../src/guestfs-actions.pod:4160
+msgid "(Added in 1.7.24)"
+msgstr "(Додано у 1.7.24)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2667
+msgid "guestfs_getxattrs"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2669
+#, no-wrap
+msgid ""
+" struct guestfs_xattr_list *\n"
+" guestfs_getxattrs (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2679
+msgid "See also: C<guestfs_lgetxattrs>, L<attr(5)>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2681 ../src/guestfs-actions.pod:4172
+#: ../src/guestfs-actions.pod:4851
+msgid ""
+"This function returns a C<struct guestfs_xattr_list *>, or NULL if there was "
+"an error. I<The caller must call C<guestfs_free_xattr_list> after use>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2685 ../src/guestfs-actions.pod:4176
+#: ../src/guestfs-actions.pod:4375 ../src/guestfs-actions.pod:4411
+#: ../src/guestfs-actions.pod:6455 ../src/guestfs-actions.pod:6979
+#: ../src/guestfs-actions.pod:8362
+msgid "(Added in 1.0.59)"
+msgstr "(Додано у 1.0.59)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2687
+msgid "guestfs_glob_expand"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2689
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_glob_expand (guestfs_h *g,\n"
+" const char *pattern);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2708 ../src/guestfs-actions.pod:7163
+#: ../src/guestfs-actions.pod:7180
+msgid "(Added in 1.0.50)"
+msgstr "(Додано у 1.0.50)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2710
+msgid "guestfs_grep"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2712
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_grep (guestfs_h *g,\n"
+" const char *regex,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2729
+msgid "guestfs_grepi"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2731
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_grepi (guestfs_h *g,\n"
+" const char *regex,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2748
+msgid "guestfs_grub_install"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2750
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_grub_install (guestfs_h *g,\n"
+" const char *root,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2793
+msgid "(Added in 1.0.17)"
+msgstr "(Додано у 1.0.17)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2795
+msgid "guestfs_head"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2797
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_head (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2813
+msgid "guestfs_head_n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2815
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_head_n (guestfs_h *g,\n"
+" int nrlines,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2837
+msgid "guestfs_hexdump"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2839
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_hexdump (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2852 ../src/guestfs-actions.pod:7244
+#: ../src/guestfs-actions.pod:7299
+msgid "(Added in 1.0.22)"
+msgstr "(Додано у 1.0.22)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2854
+msgid "guestfs_initrd_cat"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2856
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_initrd_cat (guestfs_h *g,\n"
+" const char *initrdpath,\n"
+" const char *filename,\n"
+" size_t *size_r);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2872
+msgid "See also C<guestfs_initrd_list>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2883
+msgid "guestfs_initrd_list"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2885
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_initrd_list (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2905
+msgid "guestfs_inotify_add_watch"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2907
+#, no-wrap
+msgid ""
+" int64_t\n"
+" guestfs_inotify_add_watch (guestfs_h *g,\n"
+" const char *path,\n"
+" int mask);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2926
+msgid "guestfs_inotify_close"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2928
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_inotify_close (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2939
+msgid "guestfs_inotify_files"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2941
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_inotify_files (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2944
+msgid ""
+"This function is a helpful wrapper around C<guestfs_inotify_read> which just "
+"returns a list of pathnames of objects that were touched. The returned "
+"pathnames are sorted and deduplicated."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:2954
+msgid "guestfs_inotify_init"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:2956
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_inotify_init (guestfs_h *g,\n"
+" int maxevents);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2964
+msgid ""
+"C<maxevents> is the maximum number of events which will be queued up between "
+"calls to C<guestfs_inotify_read> or C<guestfs_inotify_files>. If this is "
+"passed as C<0>, then the kernel (or previously set) default is used. For "
+"Linux 2.6.29 the default was 16384 events. Beyond this limit, the kernel "
+"throws away events, but records the fact that it threw them away by setting "
+"a flag C<IN_Q_OVERFLOW> in the returned structure list (see "
+"C<guestfs_inotify_read>)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2974
+msgid ""
+"Before any events are generated, you have to add some watches to the "
+"internal watch list. See: C<guestfs_inotify_add_watch>, "
+"C<guestfs_inotify_rm_watch> and C<guestfs_inotify_watch_all>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2980
+msgid ""
+"Queued up events should be read periodically by calling "
+"C<guestfs_inotify_read> (or C<guestfs_inotify_files> which is just a helpful "
+"wrapper around C<guestfs_inotify_read>). If you don't read the events out "
+"often enough then you risk the internal queue overflowing."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:2987
+msgid ""
+"The handle should be closed after use by calling C<guestfs_inotify_close>. "
+"This also removes any watches automatically."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3000
+msgid "guestfs_inotify_read"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3002
+#, no-wrap
+msgid ""
+" struct guestfs_inotify_event_list *\n"
+" guestfs_inotify_read (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3016
+msgid ""
+"This function returns a C<struct guestfs_inotify_event_list *>, or NULL if "
+"there was an error. I<The caller must call "
+"C<guestfs_free_inotify_event_list> after use>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3022
+msgid "guestfs_inotify_rm_watch"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3024
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_inotify_rm_watch (guestfs_h *g,\n"
+" int wd);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3028
+msgid ""
+"Remove a previously defined inotify watch. See C<guestfs_inotify_add_watch>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3035
+msgid "guestfs_inspect_get_arch"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3037
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_arch (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3041
+msgid ""
+"This returns the architecture of the inspected operating system. The "
+"possible return values are listed under C<guestfs_file_architecture>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3055
+msgid "guestfs_inspect_get_distro"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3057
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_distro (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3157
+msgid "guestfs_inspect_get_drive_mappings"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3159
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_inspect_get_drive_mappings (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3188
+msgid ""
+"Please read L<guestfs(3)/INSPECTION> for more details. See also "
+"C<guestfs_inspect_get_mountpoints>, C<guestfs_inspect_get_filesystems>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3192 ../src/guestfs-actions.pod:3460
+#: ../src/guestfs-actions.pod:4263 ../src/guestfs-actions.pod:5526
+#: ../src/guestfs-actions.pod:7601
+msgid ""
+"This function returns a NULL-terminated array of strings, or NULL if there "
+"was an error. The array of strings will always have length C<2n+1>, where "
+"C<n> keys and values alternate, followed by the trailing NULL entry. I<The "
+"caller must free the strings and the array after use>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3198 ../src/guestfs-actions.pod:3659
+msgid "(Added in 1.9.17)"
+msgstr "(Додано у 1.9.17)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3200
+msgid "guestfs_inspect_get_filesystems"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3202
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_inspect_get_filesystems (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3214
+msgid ""
+"Please read L<guestfs(3)/INSPECTION> for more details. See also "
+"C<guestfs_inspect_get_mountpoints>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3223
+msgid "guestfs_inspect_get_format"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3225
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_format (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3259 ../src/guestfs-actions.pod:3695
+#: ../src/guestfs-actions.pod:3711 ../src/guestfs-actions.pod:3729
+#: ../src/guestfs-actions.pod:6493
+msgid "(Added in 1.9.4)"
+msgstr "(Додано у 1.9.4)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3261
+msgid "guestfs_inspect_get_hostname"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3263
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_hostname (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3278
+msgid "(Added in 1.7.9)"
+msgstr "(Додано у 1.7.9)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3280
+msgid "guestfs_inspect_get_icon"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3282
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_icon (guestfs_h *g,\n"
+" const char *root,\n"
+" size_t *size_r,\n"
+" ...);\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3293
+#, no-wrap
+msgid ""
+" GUESTFS_INSPECT_GET_ICON_FAVICON, int favicon,\n"
+" GUESTFS_INSPECT_GET_ICON_HIGHQUALITY, int highquality,\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3360 ../src/guestfs-actions.pod:4190
+#: ../src/guestfs-actions.pod:5425
+msgid "(Added in 1.11.12)"
+msgstr "(Додано у 1.11.12)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3362
+msgid "guestfs_inspect_get_icon_va"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3364
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_icon_va (guestfs_h *g,\n"
+" const char *root,\n"
+" size_t *size_r,\n"
+" va_list args);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3370
+msgid "This is the \"va_list variant\" of L</guestfs_inspect_get_icon>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3374
+msgid "guestfs_inspect_get_icon_argv"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3376
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_icon_argv (guestfs_h *g,\n"
+" const char *root,\n"
+" size_t *size_r,\n"
+" const struct guestfs_inspect_get_icon_argv *optargs);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3382
+msgid "This is the \"argv variant\" of L</guestfs_inspect_get_icon>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3386
+msgid "guestfs_inspect_get_major_version"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3388
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_inspect_get_major_version (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3410
+msgid "guestfs_inspect_get_minor_version"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3412
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_inspect_get_minor_version (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3421
+msgid ""
+"Please read L<guestfs(3)/INSPECTION> for more details. See also "
+"C<guestfs_inspect_get_major_version>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3428
+msgid "guestfs_inspect_get_mountpoints"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3430
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_inspect_get_mountpoints (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3451
+msgid ""
+"For operating systems like Windows which still use drive letters, this call "
+"will only return an entry for the first drive \"mounted on\" C</>. For "
+"information about the mapping of drive letters to partitions, see "
+"C<guestfs_inspect_get_drive_mappings>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3457
+msgid ""
+"Please read L<guestfs(3)/INSPECTION> for more details. See also "
+"C<guestfs_inspect_get_filesystems>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3468
+msgid "guestfs_inspect_get_package_format"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3470
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_package_format (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3474
+msgid ""
+"This function and C<guestfs_inspect_get_package_management> return the "
+"package format and package management tool used by the inspected operating "
+"system. For example for Fedora these functions would return C<rpm> (package "
+"format) and C<yum> (package management)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3493 ../src/guestfs-actions.pod:3521
+msgid "(Added in 1.7.5)"
+msgstr "(Додано у 1.7.5)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3495
+msgid "guestfs_inspect_get_package_management"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3497
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_package_management (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3501
+msgid ""
+"C<guestfs_inspect_get_package_format> and this function return the package "
+"format and package management tool used by the inspected operating system. "
+"For example for Fedora these functions would return C<rpm> (package format) "
+"and C<yum> (package management)."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3523
+msgid "guestfs_inspect_get_product_name"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3525
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_product_name (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3544
+msgid "guestfs_inspect_get_product_variant"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3546
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_product_variant (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3569
+msgid ""
+"Please read L<guestfs(3)/INSPECTION> for more details. See also "
+"C<guestfs_inspect_get_product_name>, C<guestfs_inspect_get_major_version>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3576
+msgid "(Added in 1.9.13)"
+msgstr "(Додано у 1.9.13)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3578
+msgid "guestfs_inspect_get_roots"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3580
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_inspect_get_roots (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3583
+msgid ""
+"This function is a convenient way to get the list of root devices, as "
+"returned from a previous call to C<guestfs_inspect_os>, but without redoing "
+"the whole inspection process."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3587
+msgid ""
+"This returns an empty list if either no root devices were found or the "
+"caller has not called C<guestfs_inspect_os>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3596
+msgid "(Added in 1.7.3)"
+msgstr "(Додано у 1.7.3)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3598
+msgid "guestfs_inspect_get_type"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3600
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_type (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3641
+msgid "guestfs_inspect_get_windows_current_control_set"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3643
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_windows_current_control_set (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3661
+msgid "guestfs_inspect_get_windows_systemroot"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3663
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_inspect_get_windows_systemroot (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3679
+msgid "(Added in 1.5.25)"
+msgstr "(Додано у 1.5.25)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3681
+msgid "guestfs_inspect_is_live"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3683
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_inspect_is_live (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3687
+msgid ""
+"If C<guestfs_inspect_get_format> returns C<installer> (this is an install "
+"disk), then this returns true if a live image was detected on the disk."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3697
+msgid "guestfs_inspect_is_multipart"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3699
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_inspect_is_multipart (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3703
+msgid ""
+"If C<guestfs_inspect_get_format> returns C<installer> (this is an install "
+"disk), then this returns true if the disk is part of a set."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3713
+msgid "guestfs_inspect_is_netinst"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3715
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_inspect_is_netinst (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3719
+msgid ""
+"If C<guestfs_inspect_get_format> returns C<installer> (this is an install "
+"disk), then this returns true if the disk is a network installer, ie. not a "
+"self-contained install CD but one which is likely to require network access "
+"to complete the install."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3731
+msgid "guestfs_inspect_list_applications"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3733
+#, no-wrap
+msgid ""
+" struct guestfs_application_list *\n"
+" guestfs_inspect_list_applications (guestfs_h *g,\n"
+" const char *root);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3739
+msgid ""
+"I<Note:> This call works differently from other parts of the inspection "
+"API. You have to call C<guestfs_inspect_os>, then "
+"C<guestfs_inspect_get_mountpoints>, then mount up the disks, before calling "
+"this. Listing applications is a significantly more difficult operation "
+"which requires access to the full filesystem. Also note that unlike the "
+"other C<guestfs_inspect_get_*> calls which are just returning data cached in "
+"the libguestfs handle, this call actually reads parts of the mounted "
+"filesystems during the call."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3829
+msgid ""
+"This function returns a C<struct guestfs_application_list *>, or NULL if "
+"there was an error. I<The caller must call C<guestfs_free_application_list> "
+"after use>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3833
+msgid "(Added in 1.7.8)"
+msgstr "(Додано у 1.7.8)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3835
+msgid "guestfs_inspect_os"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3837
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_inspect_os (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3853
+msgid ""
+"You can pass the root string(s) returned to other C<guestfs_inspect_get_*> "
+"functions in order to query further information about each operating system, "
+"such as the name and version."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3858
+msgid ""
+"This function uses other libguestfs features such as C<guestfs_mount_ro> and "
+"C<guestfs_umount_all> in order to mount and unmount filesystems and look at "
+"the contents. This should be called with no disks currently mounted. The "
+"function may also use Augeas, so any existing Augeas handle will be closed."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3870 ../src/guestfs-actions.pod:4201
+#: ../src/guestfs-actions.pod:4283
+msgid "See also C<guestfs_list_filesystems>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3878
+msgid "guestfs_is_blockdev"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3880
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_blockdev (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3887 ../src/guestfs-actions.pod:3916
+#: ../src/guestfs-actions.pod:3946 ../src/guestfs-actions.pod:3961
+#: ../src/guestfs-actions.pod:3977 ../src/guestfs-actions.pod:4033
+#: ../src/guestfs-actions.pod:4048
+msgid "See also C<guestfs_stat>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:3891 ../src/guestfs-actions.pod:3920
+#: ../src/guestfs-actions.pod:3965 ../src/guestfs-actions.pod:4037
+#: ../src/guestfs-actions.pod:4052
+msgid "(Added in 1.5.10)"
+msgstr "(Додано у 1.5.10)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3893
+msgid "guestfs_is_busy"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3895
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_busy (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3907
+msgid "guestfs_is_chardev"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3909
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_chardev (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3922
+msgid "guestfs_is_config"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3924
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_config (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3936
+msgid "guestfs_is_dir"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3938
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_dir (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3952
+msgid "guestfs_is_fifo"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3954
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_fifo (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3967
+msgid "guestfs_is_file"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3969
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_file (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3983
+msgid "guestfs_is_launching"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3985
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_launching (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:3997
+msgid "guestfs_is_lv"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:3999
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_lv (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4010
+msgid "guestfs_is_ready"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4012
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_ready (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4024
+msgid "guestfs_is_socket"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4026
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_socket (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4039
+msgid "guestfs_is_symlink"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4041
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_symlink (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4054
+msgid "guestfs_is_zero"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4056
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_zero (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4065 ../src/guestfs-actions.pod:4079
+msgid "(Added in 1.11.8)"
+msgstr "(Додано у 1.11.8)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4067
+msgid "guestfs_is_zero_device"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4069
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_is_zero_device (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4081
+msgid "guestfs_kill_subprocess"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4083
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_kill_subprocess (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4092
+msgid "guestfs_launch"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4094
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_launch (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4112
+msgid "guestfs_lchown"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4114
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lchown (guestfs_h *g,\n"
+" int owner,\n"
+" int group,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4120
+msgid ""
+"Change the file owner to C<owner> and group to C<group>. This is like "
+"C<guestfs_chown> but if C<path> is a symlink then the link itself is "
+"changed, not the target."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4132
+msgid "guestfs_lgetxattr"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4134
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_lgetxattr (guestfs_h *g,\n"
+" const char *path,\n"
+" const char *name,\n"
+" size_t *size_r);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4154
+msgid "See also: C<guestfs_lgetxattrs>, C<guestfs_getxattr>, L<attr(5)>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4162
+msgid "guestfs_lgetxattrs"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4164
+#, no-wrap
+msgid ""
+" struct guestfs_xattr_list *\n"
+" guestfs_lgetxattrs (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4168
+msgid ""
+"This is the same as C<guestfs_getxattrs>, but if C<path> is a symbolic link, "
+"then it returns the extended attributes of the link itself."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4178
+msgid "guestfs_list_9p"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4180
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_list_9p (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4192
+msgid "guestfs_list_devices"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4194
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_list_devices (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4209
+msgid "guestfs_list_dm_devices"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4211
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_list_dm_devices (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4216
+msgid ""
+"The returned list contains C</dev/mapper/*> devices, eg. ones created by a "
+"previous call to C<guestfs_luks_open>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4219
+msgid ""
+"Device mapper devices which correspond to logical volumes are I<not> "
+"returned in this list. Call C<guestfs_lvs> if you want to list logical "
+"volumes."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4227 ../src/guestfs-actions.pod:5664
+msgid "(Added in 1.11.15)"
+msgstr "(Додано у 1.11.15)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4229
+msgid "guestfs_list_filesystems"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4231
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_list_filesystems (guestfs_h *g);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4251
+msgid ""
+"This command runs other libguestfs commands, which might include "
+"C<guestfs_mount> and C<guestfs_umount>, and therefore you should use this "
+"soon after launch and only when nothing is mounted."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4255
+msgid ""
+"Not all of the filesystems returned will be mountable. In particular, swap "
+"partitions are returned in the list. Also this command does not check that "
+"each filesystem found is valid and mountable, and some filesystems might be "
+"mountable but require special options. Filesystems may not all belong to a "
+"single logical operating system (use C<guestfs_inspect_os> to look for OSes)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4269 ../src/guestfs-actions.pod:6024
+msgid "(Added in 1.5.15)"
+msgstr "(Додано у 1.5.15)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4271
+msgid "guestfs_list_partitions"
+msgstr "guestfs_list_partitions"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4273
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_list_partitions (guestfs_h *g);\n"
+"\n"
+msgstr ""
+" char **\n"
+" guestfs_list_partitions (guestfs_h *g);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4280
+msgid ""
+"This does not return logical volumes. For that you will need to call "
+"C<guestfs_lvs>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4291
+msgid "guestfs_ll"
+msgstr "guestfs_ll"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4293
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_ll (guestfs_h *g,\n"
+" const char *directory);\n"
+"\n"
+msgstr ""
+" char *\n"
+" guestfs_ll (guestfs_h *g,\n"
+" const char *directory);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4308
+msgid "guestfs_ln"
+msgstr "guestfs_ln"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4310
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_ln (guestfs_h *g,\n"
+" const char *target,\n"
+" const char *linkname);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_ln (guestfs_h *g,\n"
+" const char *target,\n"
+" const char *linkname);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4321
+msgid "guestfs_ln_f"
+msgstr "guestfs_ln_f"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4323
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_ln_f (guestfs_h *g,\n"
+" const char *target,\n"
+" const char *linkname);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_ln_f (guestfs_h *g,\n"
+" const char *target,\n"
+" const char *linkname);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4335
+msgid "guestfs_ln_s"
+msgstr "guestfs_ln_s"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4337
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_ln_s (guestfs_h *g,\n"
+" const char *target,\n"
+" const char *linkname);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_ln_s (guestfs_h *g,\n"
+" const char *target,\n"
+" const char *linkname);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4348
+msgid "guestfs_ln_sf"
+msgstr "guestfs_ln_sf"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4350
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_ln_sf (guestfs_h *g,\n"
+" const char *target,\n"
+" const char *linkname);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_ln_sf (guestfs_h *g,\n"
+" const char *target,\n"
+" const char *linkname);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4362
+msgid "guestfs_lremovexattr"
+msgstr "guestfs_lremovexattr"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4364
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lremovexattr (guestfs_h *g,\n"
+" const char *xattr,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_lremovexattr (guestfs_h *g,\n"
+" const char *xattr,\n"
+" const char *path);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4369
+msgid ""
+"This is the same as C<guestfs_removexattr>, but if C<path> is a symbolic "
+"link, then it removes an extended attribute of the link itself."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4377
+msgid "guestfs_ls"
+msgstr "guestfs_ls"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4379
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_ls (guestfs_h *g,\n"
+" const char *directory);\n"
+"\n"
+msgstr ""
+" char **\n"
+" guestfs_ls (guestfs_h *g,\n"
+" const char *directory);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4387
+msgid ""
+"This command is mostly useful for interactive sessions. Programs should "
+"probably use C<guestfs_readdir> instead."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4396
+msgid "guestfs_lsetxattr"
+msgstr "guestfs_lsetxattr"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4398
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lsetxattr (guestfs_h *g,\n"
+" const char *xattr,\n"
+" const char *val,\n"
+" int vallen,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_lsetxattr (guestfs_h *g,\n"
+" const char *xattr,\n"
+" const char *val,\n"
+" int vallen,\n"
+" const char *path);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4405
+msgid ""
+"This is the same as C<guestfs_setxattr>, but if C<path> is a symbolic link, "
+"then it sets an extended attribute of the link itself."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4413
+msgid "guestfs_lstat"
+msgstr "guestfs_lstat"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4415
+#, no-wrap
+msgid ""
+" struct guestfs_stat *\n"
+" guestfs_lstat (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+" struct guestfs_stat *\n"
+" guestfs_lstat (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4421
+msgid ""
+"This is the same as C<guestfs_stat> except that if C<path> is a symbolic "
+"link, then the link is stat-ed, not the file it refers to."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4427 ../src/guestfs-actions.pod:7204
+msgid ""
+"This function returns a C<struct guestfs_stat *>, or NULL if there was an "
+"error. I<The caller must call C<guestfs_free_stat> after use>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4431 ../src/guestfs-actions.pod:7208
+#: ../src/guestfs-actions.pod:7226 ../src/guestfs-actions.pod:7607
+msgid "(Added in 0.9.2)"
+msgstr "(Додано у 0.9.2)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4433
+msgid "guestfs_lstatlist"
+msgstr "guestfs_lstatlist"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4435
+#, no-wrap
+msgid ""
+" struct guestfs_stat_list *\n"
+" guestfs_lstatlist (guestfs_h *g,\n"
+" const char *path,\n"
+" char *const *names);\n"
+"\n"
+msgstr ""
+" struct guestfs_stat_list *\n"
+" guestfs_lstatlist (guestfs_h *g,\n"
+" const char *path,\n"
+" char *const *names);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4440
+msgid ""
+"This call allows you to perform the C<guestfs_lstat> operation on multiple "
+"files, where all files are in the directory C<path>. C<names> is the list "
+"of files from this directory."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4449
+msgid ""
+"This call is intended for programs that want to efficiently list a directory "
+"contents without making many round-trips. See also C<guestfs_lxattrlist> "
+"for a similarly efficient call for getting extended attributes. Very long "
+"directory listings might cause the protocol message size to be exceeded, "
+"causing this call to fail. The caller must split up such requests into "
+"smaller groups of names."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4457
+msgid ""
+"This function returns a C<struct guestfs_stat_list *>, or NULL if there was "
+"an error. I<The caller must call C<guestfs_free_stat_list> after use>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4463
+msgid "guestfs_luks_add_key"
+msgstr "guestfs_luks_add_key"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4465
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_luks_add_key (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" const char *newkey,\n"
+" int keyslot);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_luks_add_key (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" const char *newkey,\n"
+" int keyslot);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4477
+msgid ""
+"Note that if C<keyslot> already contains a key, then this command will "
+"fail. You have to use C<guestfs_luks_kill_slot> first to remove that key."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4483 ../src/guestfs-actions.pod:4520
+#: ../src/guestfs-actions.pod:4540 ../src/guestfs-actions.pod:4560
+#: ../src/guestfs-actions.pod:4595 ../src/guestfs-actions.pod:4614
+msgid ""
+"This function takes a key or passphrase parameter which could contain "
+"sensitive material. Read the section L</KEYS AND PASSPHRASES> for more "
+"information."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4487 ../src/guestfs-actions.pod:4524
+#: ../src/guestfs-actions.pod:4544 ../src/guestfs-actions.pod:4564
+msgid "(Added in 1.5.2)"
+msgstr "(Додано у 1.5.2)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4489
+msgid "guestfs_luks_close"
+msgstr "guestfs_luks_close"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4491
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_luks_close (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_luks_close (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4495
+msgid ""
+"This closes a LUKS device that was created earlier by C<guestfs_luks_open> "
+"or C<guestfs_luks_open_ro>. The C<device> parameter must be the name of the "
+"LUKS mapping device (ie. C</dev/mapper/mapname>) and I<not> the name of the "
+"underlying block device."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4503 ../src/guestfs-actions.pod:4599
+#: ../src/guestfs-actions.pod:4618 ../src/guestfs-actions.pod:4668
+#: ../src/guestfs-actions.pod:4713
+msgid "(Added in 1.5.1)"
+msgstr "(Додано у 1.5.1)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4505
+msgid "guestfs_luks_format"
+msgstr "guestfs_luks_format"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4507
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_luks_format (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" int keyslot);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_luks_format (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" int keyslot);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4526
+msgid "guestfs_luks_format_cipher"
+msgstr "guestfs_luks_format_cipher"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4528
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_luks_format_cipher (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" int keyslot,\n"
+" const char *cipher);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_luks_format_cipher (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" int keyslot,\n"
+" const char *cipher);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4535
+msgid ""
+"This command is the same as C<guestfs_luks_format> but it also allows you to "
+"set the C<cipher> used."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4546
+msgid "guestfs_luks_kill_slot"
+msgstr "guestfs_luks_kill_slot"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4548
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_luks_kill_slot (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" int keyslot);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_luks_kill_slot (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" int keyslot);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4566
+msgid "guestfs_luks_open"
+msgstr "guestfs_luks_open"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4568
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_luks_open (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" const char *mapname);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_luks_open (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" const char *mapname);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4586
+msgid ""
+"If this block device contains LVM volume groups, then calling "
+"C<guestfs_vgscan> followed by C<guestfs_vg_activate_all> will make them "
+"visible."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4590
+msgid "Use C<guestfs_list_dm_devices> to list all device mapper devices."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4601
+msgid "guestfs_luks_open_ro"
+msgstr "guestfs_luks_open_ro"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4603
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_luks_open_ro (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" const char *mapname);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_luks_open_ro (guestfs_h *g,\n"
+" const char *device,\n"
+" const char *key,\n"
+" const char *mapname);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4609
+msgid ""
+"This is the same as C<guestfs_luks_open> except that a read-only mapping is "
+"created."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4620
+msgid "guestfs_lvcreate"
+msgstr "guestfs_lvcreate"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4622
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lvcreate (guestfs_h *g,\n"
+" const char *logvol,\n"
+" const char *volgroup,\n"
+" int mbytes);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_lvcreate (guestfs_h *g,\n"
+" const char *logvol,\n"
+" const char *volgroup,\n"
+" int mbytes);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4635
+msgid "guestfs_lvm_canonical_lv_name"
+msgstr "guestfs_lvm_canonical_lv_name"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4637
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_lvm_canonical_lv_name (guestfs_h *g,\n"
+" const char *lvname);\n"
+"\n"
+msgstr ""
+" char *\n"
+" guestfs_lvm_canonical_lv_name (guestfs_h *g,\n"
+" const char *lvname);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4648
+msgid "See also C<guestfs_is_lv>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4653
+msgid "(Added in 1.5.24)"
+msgstr "(Додано у 1.5.24)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4655
+msgid "guestfs_lvm_clear_filter"
+msgstr "guestfs_lvm_clear_filter"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4657
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lvm_clear_filter (guestfs_h *g);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_lvm_clear_filter (guestfs_h *g);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4660
+msgid ""
+"This undoes the effect of C<guestfs_lvm_set_filter>. LVM will be able to "
+"see every block device."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4670
+msgid "guestfs_lvm_remove_all"
+msgstr "guestfs_lvm_remove_all"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4672
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lvm_remove_all (guestfs_h *g);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_lvm_remove_all (guestfs_h *g);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4682
+msgid "guestfs_lvm_set_filter"
+msgstr "guestfs_lvm_set_filter"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4684
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lvm_set_filter (guestfs_h *g,\n"
+" char *const *devices);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_lvm_set_filter (guestfs_h *g,\n"
+" char *const *devices);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4715
+msgid "guestfs_lvremove"
+msgstr "guestfs_lvremove"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4717
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lvremove (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_lvremove (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4729 ../src/guestfs-actions.pod:6139
+#: ../src/guestfs-actions.pod:7977
+msgid "(Added in 1.0.13)"
+msgstr "(Додано у 1.0.13)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4731
+msgid "guestfs_lvrename"
+msgstr "guestfs_lvrename"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4733
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lvrename (guestfs_h *g,\n"
+" const char *logvol,\n"
+" const char *newlogvol);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_lvrename (guestfs_h *g,\n"
+" const char *logvol,\n"
+" const char *newlogvol);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4742 ../src/guestfs-actions.pod:7990
+msgid "(Added in 1.0.83)"
+msgstr "(Додано у 1.0.83)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4744
+msgid "guestfs_lvresize"
+msgstr "guestfs_lvresize"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4746
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lvresize (guestfs_h *g,\n"
+" const char *device,\n"
+" int mbytes);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_lvresize (guestfs_h *g,\n"
+" const char *device,\n"
+" int mbytes);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4759
+msgid "guestfs_lvresize_free"
+msgstr "guestfs_lvresize_free"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4761
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_lvresize_free (guestfs_h *g,\n"
+" const char *lv,\n"
+" int percent);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_lvresize_free (guestfs_h *g,\n"
+" const char *lv,\n"
+" int percent);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4774
+msgid "(Added in 1.3.3)"
+msgstr "(Додано у 1.3.3)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4776
+msgid "guestfs_lvs"
+msgstr "guestfs_lvs"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4778
+#, no-wrap
+msgid ""
+" char **\n"
+" guestfs_lvs (guestfs_h *g);\n"
+"\n"
+msgstr ""
+" char **\n"
+" guestfs_lvs (guestfs_h *g);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4787
+msgid "See also C<guestfs_lvs_full>, C<guestfs_list_filesystems>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4795
+msgid "guestfs_lvs_full"
+msgstr "guestfs_lvs_full"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4797
+#, no-wrap
+msgid ""
+" struct guestfs_lvm_lv_list *\n"
+" guestfs_lvs_full (guestfs_h *g);\n"
+"\n"
+msgstr ""
+" struct guestfs_lvm_lv_list *\n"
+" guestfs_lvs_full (guestfs_h *g);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4803
+msgid ""
+"This function returns a C<struct guestfs_lvm_lv_list *>, or NULL if there "
+"was an error. I<The caller must call C<guestfs_free_lvm_lv_list> after use>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4809
+msgid "guestfs_lvuuid"
+msgstr "guestfs_lvuuid"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4811
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_lvuuid (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" char *\n"
+" guestfs_lvuuid (guestfs_h *g,\n"
+" const char *device);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4822
+msgid "guestfs_lxattrlist"
+msgstr "guestfs_lxattrlist"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4824
+#, no-wrap
+msgid ""
+" struct guestfs_xattr_list *\n"
+" guestfs_lxattrlist (guestfs_h *g,\n"
+" const char *path,\n"
+" char *const *names);\n"
+"\n"
+msgstr ""
+" struct guestfs_xattr_list *\n"
+" guestfs_lxattrlist (guestfs_h *g,\n"
+" const char *path,\n"
+" char *const *names);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4843
+msgid ""
+"This call is intended for programs that want to efficiently list a directory "
+"contents without making many round-trips. See also C<guestfs_lstatlist> for "
+"a similarly efficient call for getting standard stats. Very long directory "
+"listings might cause the protocol message size to be exceeded, causing this "
+"call to fail. The caller must split up such requests into smaller groups of "
+"names."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4857
+msgid "guestfs_mkdir"
+msgstr "guestfs_mkdir"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4859
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_mkdir (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_mkdir (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4869
+msgid "guestfs_mkdir_mode"
+msgstr "guestfs_mkdir_mode"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4871
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_mkdir_mode (guestfs_h *g,\n"
+" const char *path,\n"
+" int mode);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_mkdir_mode (guestfs_h *g,\n"
+" const char *path,\n"
+" int mode);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4883
+msgid "See also C<guestfs_mkdir>, C<guestfs_umask>"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4889
+msgid "guestfs_mkdir_p"
+msgstr "guestfs_mkdir_p"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4891
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_mkdir_p (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_mkdir_p (guestfs_h *g,\n"
+" const char *path);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4902
+msgid "guestfs_mkdtemp"
+msgstr "guestfs_mkdtemp"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4904
+#, no-wrap
+msgid ""
+" char *\n"
+" guestfs_mkdtemp (guestfs_h *g,\n"
+" const char *template);\n"
+"\n"
+msgstr ""
+" char *\n"
+" guestfs_mkdtemp (guestfs_h *g,\n"
+" const char *template);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4932
+msgid "guestfs_mke2fs_J"
+msgstr "guestfs_mke2fs_J"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4934
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_mke2fs_J (guestfs_h *g,\n"
+" const char *fstype,\n"
+" int blocksize,\n"
+" const char *device,\n"
+" const char *journal);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_mke2fs_J (guestfs_h *g,\n"
+" const char *fstype,\n"
+" int blocksize,\n"
+" const char *device,\n"
+" const char *journal);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4947
+msgid "See also C<guestfs_mke2journal>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4951 ../src/guestfs-actions.pod:4969
+#: ../src/guestfs-actions.pod:4987 ../src/guestfs-actions.pod:5003
+#: ../src/guestfs-actions.pod:5017 ../src/guestfs-actions.pod:5031
+#: ../src/guestfs-actions.pod:5090 ../src/guestfs-actions.pod:5367
+msgid "(Added in 1.0.68)"
+msgstr "(Додано у 1.0.68)"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4953
+msgid "guestfs_mke2fs_JL"
+msgstr "guestfs_mke2fs_JL"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4955
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_mke2fs_JL (guestfs_h *g,\n"
+" const char *fstype,\n"
+" int blocksize,\n"
+" const char *device,\n"
+" const char *label);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_mke2fs_JL (guestfs_h *g,\n"
+" const char *fstype,\n"
+" int blocksize,\n"
+" const char *device,\n"
+" const char *label);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4965
+msgid "See also C<guestfs_mke2journal_L>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4971
+msgid "guestfs_mke2fs_JU"
+msgstr "guestfs_mke2fs_JU"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4973
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_mke2fs_JU (guestfs_h *g,\n"
+" const char *fstype,\n"
+" int blocksize,\n"
+" const char *device,\n"
+" const char *uuid);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_mke2fs_JU (guestfs_h *g,\n"
+" const char *fstype,\n"
+" int blocksize,\n"
+" const char *device,\n"
+" const char *uuid);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:4983
+msgid "See also C<guestfs_mke2journal_U>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:4989
+msgid "guestfs_mke2journal"
+msgstr "guestfs_mke2journal"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:4991
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_mke2journal (guestfs_h *g,\n"
+" int blocksize,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_mke2journal (guestfs_h *g,\n"
+" int blocksize,\n"
+" const char *device);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:5005
+msgid "guestfs_mke2journal_L"
+msgstr "guestfs_mke2journal_L"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:5007
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_mke2journal_L (guestfs_h *g,\n"
+" int blocksize,\n"
+" const char *label,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_mke2journal_L (guestfs_h *g,\n"
+" int blocksize,\n"
+" const char *label,\n"
+" const char *device);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:5019
+msgid "guestfs_mke2journal_U"
+msgstr "guestfs_mke2journal_U"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:5021
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_mke2journal_U (guestfs_h *g,\n"
+" int blocksize,\n"
+" const char *uuid,\n"
+" const char *device);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_mke2journal_U (guestfs_h *g,\n"
+" int blocksize,\n"
+" const char *uuid,\n"
+" const char *device);\n"
+"\n"
+
+#. type: =head2
+#: ../src/guestfs-actions.pod:5033
+msgid "guestfs_mkfifo"
+msgstr "guestfs_mkfifo"
+
+#. type: verbatim
+#: ../src/guestfs-actions.pod:5035
+#, no-wrap
+msgid ""
+" int\n"
+" guestfs_mkfifo (guestfs_h *g,\n"
+" int mode,\n"
+" const char *path);\n"
+"\n"
+msgstr ""
+" int\n"
+" guestfs_mkfifo (guestfs_h *g,\n"
+" int mode,\n"
+" const char *path);\n"
+"\n"
+
+#. type: textblock
+#: ../src/guestfs-actions.pod:5040
git.annexia.org / libguestfs.git / blobdiff