-" hexedit <filename|device> <max>\n"
-" hexedit <filename|device> <start> <max>\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:87
-msgid ""
-"Use hexedit (a hex editor) to edit all or part of a binary file or block "
-"device."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:90
-msgid ""
-"This command works by downloading potentially the whole file or device, "
-"editing it locally, then uploading it. If the file or device is large, you "
-"have to specify which part you wish to edit by using C<max> and/or C<start> "
-"C<max> parameters. C<start> and C<max> are specified in bytes, with the "
-"usual modifiers allowed such as C<1M> (1 megabyte)."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:97
-msgid "For example to edit the first few sectors of a disk you might do:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fish/guestfish-commands.pod:100
-#, no-wrap
-msgid ""
-" hexedit /dev/sda 1M\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:102
-msgid ""
-"which would allow you to edit anywhere within the first megabyte of the disk."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:105
-msgid "To edit the superblock of an ext2 filesystem on C</dev/sda1>, do:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fish/guestfish-commands.pod:107
-#, no-wrap
-msgid ""
-" hexedit /dev/sda1 0x400 0x400\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:109
-msgid "(assuming the superblock is in the standard location)."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:111
-msgid ""
-"This command requires the external L<hexedit(1)> program. You can specify "
-"another program to use by setting the C<HEXEDITOR> environment variable."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:115
-msgid "See also L</hexdump>."
-msgstr ""
-
-# type: =head2
-#. type: =head2
-#: ../fish/guestfish-commands.pod:117
-msgid "lcd"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fish/guestfish-commands.pod:119
-#, no-wrap
-msgid ""
-" lcd directory\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:121
-msgid ""
-"Change the local directory, ie. the current directory of guestfish itself."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:124
-msgid "Note that C<!cd> won't do what you might expect."
-msgstr ""
-
-# type: =head2
-#. type: =head2
-#: ../fish/guestfish-commands.pod:126
-msgid "man"
-msgstr ""
-
-# type: =head2
-#. type: =head2
-#: ../fish/guestfish-commands.pod:128
-msgid "manual"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fish/guestfish-commands.pod:130
-#, no-wrap
-msgid ""
-" man\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:132
-msgid "Opens the manual page for guestfish."
-msgstr ""
-
-# type: =head2
-#. type: =head2
-#: ../fish/guestfish-commands.pod:134
-msgid "more"
-msgstr ""
-
-# type: =head2
-#. type: =head2
-#: ../fish/guestfish-commands.pod:136
-msgid "less"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fish/guestfish-commands.pod:138
-#, no-wrap
-msgid ""
-" more filename\n"
-"\n"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fish/guestfish-commands.pod:140
-#, no-wrap
-msgid ""
-" less filename\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:142
-msgid "This is used to view a file."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:144
-msgid ""
-"The default viewer is C<$PAGER>. However if you use the alternate command "
-"C<less> you will get the C<less> command specifically."
-msgstr ""
-
-# type: =head2
-#. type: =head2
-#: ../fish/guestfish-commands.pod:147
-msgid "reopen"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fish/guestfish-commands.pod:149
-#, no-wrap
-msgid ""
-" reopen\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:151
-msgid ""
-"Close and reopen the libguestfs handle. It is not necessary to use this "
-"normally, because the handle is closed properly when guestfish exits. "
-"However this is occasionally useful for testing."
-msgstr ""
-
-# type: =head2
-#. type: =head2
-#: ../fish/guestfish-commands.pod:155
-msgid "sparse"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fish/guestfish-commands.pod:157
-#, no-wrap
-msgid ""
-" sparse filename size\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:159
-msgid ""
-"This creates an empty sparse file of the given size, and then adds so it can "
-"be further examined."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:162
-msgid ""
-"In all respects it works the same as the L</alloc> command, except that the "
-"image file is allocated sparsely, which means that disk blocks are not "
-"assigned to the file until they are needed. Sparse disk files only use "
-"space when written to, but they are slower and there is a danger you could "
-"run out of real disk space during a write operation."
-msgstr ""
-
-# type: =head2
-#. type: =head2
-#: ../fish/guestfish-commands.pod:172
-msgid "supported"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fish/guestfish-commands.pod:174
-#, no-wrap
-msgid ""
-" supported\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:176
-msgid ""
-"This command returns a list of the optional groups known to the daemon, and "
-"indicates which ones are supported by this build of the libguestfs appliance."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:180
-msgid "See also L<guestfs(3)/AVAILABILITY>."
-msgstr ""
-
-# type: =head2
-#. type: =head2
-#: ../fish/guestfish-commands.pod:182
-msgid "time"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fish/guestfish-commands.pod:184
-#, no-wrap
-msgid ""
-" time command args...\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fish/guestfish-commands.pod:186
-msgid ""
-"Run the command as usual, but print the elapsed time afterwards. This can "
-"be useful for benchmarking operations."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:5
-msgid "libguestfs-test-tool - End user tests for libguestfs"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../test-tool/libguestfs-test-tool.pod:9
-#, no-wrap
-msgid ""
-" libguestfs-test-tool [--options]\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:13
-msgid ""
-"libguestfs-test-tool is a test program shipped with libguestfs to end users "
-"and developers, to allow them to check basic libguestfs functionality is "
-"working. This is needed because libguestfs occasionally breaks for reasons "
-"beyond our control: usually because of changes in the underlying qemu or "
-"kernel packages, or the host environment."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:20
-msgid "If you suspect a problem in libguestfs, then just run:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../test-tool/libguestfs-test-tool.pod:22
-#, no-wrap
-msgid ""
-" libguestfs-test-tool\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:24
-msgid "It will print lots of diagnostic messages."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:26
-msgid "If it runs to completion successfully, you will see this near the end:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../test-tool/libguestfs-test-tool.pod:28
-#, no-wrap
-msgid ""
-" ===== TEST FINISHED OK =====\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:30
-msgid "and the test tool will exit with code 0."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:32
-msgid ""
-"If it fails (and/or exits with non-zero error code), please paste the "
-"B<complete, unedited> output of the test tool into a bug report. More "
-"information about reporting bugs can be found on the L<http://libguestfs.org/"
-"> website."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../test-tool/libguestfs-test-tool.pod:41
-msgid "I<--help>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:43
-msgid "Display short usage information and exit."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../test-tool/libguestfs-test-tool.pod:45
-msgid "I<--helper /path/to/libguestfs-test-tool-helper>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:47
-msgid ""
-"Pass an alternate name for the helper program. libguestfs-test-tool will "
-"normally look in the C<$libexec> directory that was configured when the tool "
-"was built."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../test-tool/libguestfs-test-tool.pod:51
-msgid "I<--qemu qemu_binary>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:53
-msgid ""
-"If you have downloaded another qemu binary, point this option at the full "
-"path of the binary to try it."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../test-tool/libguestfs-test-tool.pod:56
-msgid "I<--qemudir qemu_source_dir>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:58
-msgid ""
-"If you have compiled qemu from source, point this option at the source "
-"directory to try it."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../test-tool/libguestfs-test-tool.pod:61
-msgid "I<--timeout N>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:63
-msgid ""
-"Set the launch timeout to C<N> seconds. The default is 120 seconds which "
-"does not usually need to be adjusted unless your machine is very slow."
-msgstr ""
-
-# type: =head1
-#. type: =head1
-#: ../test-tool/libguestfs-test-tool.pod:69
-msgid "TRYING OUT A DIFFERENT VERSION OF QEMU"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:71
-msgid ""
-"If you have compiled another version of qemu from source and would like to "
-"try that, then you can use the I<--qemudir> option to point to the qemu "
-"source directory."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:75
-msgid ""
-"If you have downloaded a qemu binary from somewhere, use the I<--qemu> "
-"option to point to the binary."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:78
-msgid ""
-"When using an alternate qemu with libguestfs, usually you would need to "
-"write a qemu wrapper script (see section I<QEMU WRAPPERS> in L<guestfs(3)"
-">). libguestfs-test-tool writes a temporary qemu wrapper script when you "
-"use either of the I<--qemudir> or I<--qemu> options."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:85
-msgid ""
-"libguestfs-test-tool returns I<0> if the tests completed without error, or "
-"I<1> if there was an error."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../test-tool/libguestfs-test-tool.pod:92
-msgid "/usr/libexec/libguestfs-test-tool-helper"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:94
-msgid ""
-"This helper program is run inside the appliance and provides additional "
-"tests."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../test-tool/libguestfs-test-tool.pod:97
-msgid "/usr/bin/mkisofs"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:99
-msgid ""
-"The C<mkisofs> command is required in order to construct a CD-ROM ISO file "
-"which is used as part of the tests."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:106
-msgid ""
-"For the full list of environment variables which may affect libguestfs, "
-"please see the L<guestfs(3)> manual page."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:111
-msgid "L<guestfs(3)>, L<http://libguestfs.org/>, L<http://qemu.org/>."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../test-tool/libguestfs-test-tool.pod:121
-msgid "Copyright (C) 2009 Red Hat Inc. L<http://libguestfs.org/>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:5
-msgid ""
-"guestmount - Mount a guest filesystem on the host using FUSE and libguestfs"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:9
-#, no-wrap
-msgid ""
-" guestmount [--options] -a disk.img -m device [--ro] mountpoint\n"
-"\n"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:11
-#, no-wrap
-msgid ""
-" guestmount [--options] -a disk.img -i [--ro] mountpoint\n"
-"\n"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:13
-#, no-wrap
-msgid ""
-" guestmount [--options] -d Guest -i [--ro] mountpoint\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:17
-msgid ""
-"You must I<not> use C<guestmount> in read-write mode on live virtual "
-"machines. If you do this, you risk disk corruption in the VM."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:22
-msgid ""
-"The guestmount program can be used to mount virtual machine filesystems and "
-"other disk images on the host. It uses libguestfs for access to the guest "
-"filesystem, and FUSE (the \"filesystem in userspace\") to make it appear as "
-"a mountable device."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:27
-msgid ""
-"Along with other options, you have to give at least one device (I<-a> "
-"option) or libvirt domain (I<-d> option), and at least one mountpoint (I<-m> "
-"option) or use the I<-i> inspection option. How this works is better "
-"explained in the L<guestfish(1)> manual page, or by looking at the examples "
-"below."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:33
-msgid ""
-"FUSE lets you mount filesystems as non-root. The mountpoint must be owned "
-"by you, and the filesystem will not be visible to any other users unless you "
-"make certain global configuration changes to C</etc/fuse.conf>. To unmount "
-"the filesystem, use the C<fusermount -u> command."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:41
-msgid ""
-"For a typical Windows guest which has its main filesystem on the first "
-"partition:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:44
-#, no-wrap
-msgid ""
-" guestmount -a windows.img -m /dev/sda1 --ro /mnt\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:46
-msgid ""
-"For a typical Linux guest which has a /boot filesystem on the first "
-"partition, and the root filesystem on a logical volume:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:49
-#, no-wrap
-msgid ""
-" guestmount -a linux.img -m /dev/VG/LV -m /dev/sda1:/boot --ro /mnt\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:51
-msgid "To get libguestfs to detect guest mountpoints for you:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:53
-#, no-wrap
-msgid ""
-" guestmount -a guest.img -i --ro /mnt\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:55
-msgid "For a libvirt guest called \"Guest\" you could do:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:57
-#, no-wrap
-msgid ""
-" guestmount -d Guest -i --ro /mnt\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:59
-msgid ""
-"If you don't know what filesystems are contained in a guest or disk image, "
-"use L<virt-filesystems(1)> first:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:62
-#, no-wrap
-msgid ""
-" virt-filesystems MyGuest\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:64
-msgid ""
-"If you want to trace the libguestfs calls but without excessive debugging "
-"information, we recommend:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:67
-#, no-wrap
-msgid ""
-" guestmount [...] --trace /mnt\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:69
-msgid "If you want to debug the program, we recommend:"
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:71
-#, no-wrap
-msgid ""
-" guestmount [...] --trace --verbose /mnt\n"
-"\n"
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:77
-msgid "B<-a image> | B<--add image>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:79
-msgid "Add a block device or virtual machine image."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:84
-msgid "B<-c URI> | B<--connect URI>"
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:90
-msgid "B<-d libvirt-domain> | B<--domain libvirt-domain>"
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:96
-msgid "B<--dir-cache-timeout N>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:98
-msgid ""
-"Set the readdir cache timeout to I<N> seconds, the default being 60 "
-"seconds. The readdir cache [actually, there are several semi-independent "
-"caches] is populated after a readdir(2) call with the stat and extended "
-"attributes of the files in the directory, in anticipation that they will be "
-"requested soon after."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:104
-msgid ""
-"There is also a different attribute cache implemented by FUSE (see the FUSE "
-"option I<-o attr_timeout>), but the FUSE cache does not anticipate future "
-"requests, only cache existing ones."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:115
-msgid "B<--format=raw|qcow2|..> | B<--format>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:122
-msgid ""
-"If you have untrusted raw-format guest disk images, you should use this "
-"option to specify the disk format. This avoids a possible security problem "
-"with malicious guests (CVE-2010-3851). See also L<guestfs(3)/"
-"guestfs_add_drive_opts>."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:127
-msgid "B<--fuse-help>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:129
-msgid "Display help on special FUSE options (see I<-o> below)."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:133
-msgid "Display brief help and exit."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:135
-msgid "B<-i> | B<--inspector>"
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:151
-msgid "B<-m dev[:mnt]> | B<--mount dev[:mnt]>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:153
-msgid ""
-"Mount the named partition or logical volume on the given mountpoint B<in the "
-"guest> (this has nothing to do with mountpoints in the host)."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:156
-msgid ""
-"If the mountpoint is omitted, it defaults to C</>. You have to mount "
-"something on C</>."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:159
-msgid "B<-n> | B<--no-sync>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:161
-msgid ""
-"By default, we attempt to sync the guest disk when the FUSE mountpoint is "
-"unmounted. If you specify this option, then we don't attempt to sync the "
-"disk. See the discussion of autosync in the L<guestfs(3)> manpage."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:166
-msgid "B<-o option> | B<--option option>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:168
-msgid "Pass extra options to FUSE."
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:170
-msgid ""
-"To get a list of all the extra options supported by FUSE, use the command "
-"below. Note that only the FUSE I<-o> options can be passed, and only some "
-"of them are a good idea."
-msgstr ""
-
-# type: verbatim
-#. type: verbatim
-#: ../fuse/guestmount.pod:174
-#, no-wrap
-msgid ""
-" guestmount --fuse-help\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:176
-msgid "Some potentially useful FUSE options:"
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:180
-msgid "B<-o allow_other>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:182
-msgid "Allow other users to see the filesystem."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:184
-msgid "B<-o attr_timeout=N>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:186
-msgid "Enable attribute caching by FUSE, and set the timeout to I<N> seconds."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:188
-msgid "B<-o kernel_cache>"
-msgstr ""
-
-# type: textblock
-#. type: textblock
-#: ../fuse/guestmount.pod:190
-msgid ""
-"Allow the kernel to cache files (reduces the number of reads that have to go "
-"through the L<guestfs(3)> API). This is generally a good idea if you can "
-"afford the extra memory usage."
-msgstr ""
-
-# type: =item
-#. type: =item
-#: ../fuse/guestmount.pod:194
-msgid "B<-o uid=N> B<-o gid=N>"