Set the value associated with C<path> to C<value>.
+=item $h->blockdev_flushbufs ($device);
+
+This tells the kernel to flush internal buffers associated
+with C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=item $blocksize = $h->blockdev_getbsz ($device);
+
+This returns the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=item $ro = $h->blockdev_getro ($device);
+
+Returns a boolean indicating if the block device is read-only
+(true if read-only, false if not).
+
+This uses the L<blockdev(8)> command.
+
+=item $sizeinbytes = $h->blockdev_getsize64 ($device);
+
+This returns the size of the device in bytes.
+
+See also C<$h-E<gt>blockdev_getsz>.
+
+This uses the L<blockdev(8)> command.
+
+=item $sectorsize = $h->blockdev_getss ($device);
+
+This returns the size of sectors on a block device.
+Usually 512, but can be larger for modern devices.
+
+(Note, this is not the size in sectors, use C<$h-E<gt>blockdev_getsz>
+for that).
+
+This uses the L<blockdev(8)> command.
+
+=item $sizeinsectors = $h->blockdev_getsz ($device);
+
+This returns the size of the device in units of 512-byte sectors
+(even if the sectorsize isn't 512 bytes ... weird).
+
+See also C<$h-E<gt>blockdev_getss> for the real sector size of
+the device, and C<$h-E<gt>blockdev_getsize64> for the more
+useful I<size in bytes>.
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_rereadpt ($device);
+
+Reread the partition table on C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_setbsz ($device, $blocksize);
+
+This sets the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_setro ($device);
+
+Sets the block device named C<device> to read-only.
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_setrw ($device);
+
+Sets the block device named C<device> to read-write.
+
+This uses the L<blockdev(8)> command.
+
=item $content = $h->cat ($path);
Return the contents of the file named C<path>.
Note that this function cannot correctly handle binary files
(specifically, files containing C<\0> character which is treated
-as end of string). For those you need to use the C<$h-E<gt>read_file>
+as end of string). For those you need to use the C<$h-E<gt>download>
function which has a more complex interface.
Because of the message protocol, there is a transfer limit
of somewhere between 2MB and 4MB. To transfer large files you should use
FTP.
+=item $checksum = $h->checksum ($csumtype, $path);
+
+This call computes the MD5, SHAx or CRC checksum of the
+file named C<path>.
+
+The type of checksum to compute is given by the C<csumtype>
+parameter which must have one of the following values:
+
+=over 4
+
+=item C<crc>
+
+Compute the cyclic redundancy check (CRC) specified by POSIX
+for the C<cksum> command.
+
+=item C<md5>
+
+Compute the MD5 hash (using the C<md5sum> program).
+
+=item C<sha1>
+
+Compute the SHA1 hash (using the C<sha1sum> program).
+
+=item C<sha224>
+
+Compute the SHA224 hash (using the C<sha224sum> program).
+
+=item C<sha256>
+
+Compute the SHA256 hash (using the C<sha256sum> program).
+
+=item C<sha384>
+
+Compute the SHA384 hash (using the C<sha384sum> program).
+
+=item C<sha512>
+
+Compute the SHA512 hash (using the C<sha512sum> program).
+
+=back
+
+The checksum is returned as a printable string.
+
=item $h->chmod ($mode, $path);
Change the mode (permissions) of C<path> to C<mode>. Only
=item $output = $h->command (\@arguments);
-This calls runs a command from the guest filesystem. The
+This call runs a command from the guest filesystem. The
filesystem must be mounted, and must contain a compatible
operating system (ie. something Linux, with the same
or compatible processor architecture).
C<value> can be NULL.
+=item $h->download ($remotefilename, $filename);
+
+Download file C<remotefilename> and save it as C<filename>
+on the local machine.
+
+C<filename> can also be a named pipe.
+
+See also C<$h-E<gt>upload>, C<$h-E<gt>cat>.
+
=item $existsflag = $h->exists ($path);
This returns C<true> if and only if there is a file, directory
This is always non-NULL. If it wasn't set already, then this will
return the default path.
+=item $qemu = $h->get_qemu ();
+
+Return the current qemu binary.
+
+This is always non-NULL. If it wasn't set already, then this will
+return the default qemu binary name.
+
+=item $state = $h->get_state ();
+
+This returns the current state as an opaque integer. This is
+only useful for printing debug and internal error messages.
+
+For more information on states, see L<guestfs(3)>.
+
=item $verbose = $h->get_verbose ();
This returns the verbose messages flag.
+=item $busy = $h->is_busy ();
+
+This returns true iff this handle is busy processing a command
+(in the C<BUSY> state).
+
+For more information on states, see L<guestfs(3)>.
+
+=item $config = $h->is_config ();
+
+This returns true iff this handle is being configured
+(in the C<CONFIG> state).
+
+For more information on states, see L<guestfs(3)>.
+
=item $dirflag = $h->is_dir ($path);
This returns C<true> if and only if there is a directory
See also C<$h-E<gt>stat>.
+=item $launching = $h->is_launching ();
+
+This returns true iff this handle is launching the subprocess
+(in the C<LAUNCHING> state).
+
+For more information on states, see L<guestfs(3)>.
+
+=item $ready = $h->is_ready ();
+
+This returns true iff this handle is ready to accept commands
+(in the C<READY> state).
+
+For more information on states, see L<guestfs(3)>.
+
=item $h->kill_subprocess ();
This kills the qemu subprocess. You should never need to call this.
This command is mostly useful for interactive sessions. Programs
should probably use C<$h-E<gt>readdir> instead.
+=item %statbuf = $h->lstat ($path);
+
+Returns file information for the given C<path>.
+
+This is the same as C<$h-E<gt>stat> except that if C<path>
+is a symbolic link, then the link is stat-ed, not the file it
+refers to.
+
+This is the same as the C<lstat(2)> system call.
+
=item $h->lvcreate ($logvol, $volgroup, $mbytes);
This creates an LVM volume group called C<logvol>
The filesystem options C<sync> and C<noatime> are set with this
call, in order to improve reliability.
+=item $h->mount_options ($options, $device, $mountpoint);
+
+This is the same as the C<$h-E<gt>mount> command, but it
+allows you to set the mount options as for the
+L<mount(8)> I<-o> flag.
+
+=item $h->mount_ro ($device, $mountpoint);
+
+This is the same as the C<$h-E<gt>mount> command, but it
+mounts the filesystem with the read-only (I<-o ro>) flag.
+
+=item $h->mount_vfs ($options, $vfstype, $device, $mountpoint);
+
+This is the same as the C<$h-E<gt>mount> command, but it
+allows you to set both the mount options and the vfstype
+as for the L<mount(8)> I<-o> and I<-t> flags.
+
=item @devices = $h->mounts ();
This returns the list of currently mounted filesystems. It returns
best effort attempt to run C<$h-E<gt>sync> when the handle is closed
(also if the program exits without closing handles).
+=item $h->set_busy ();
+
+This sets the state to C<BUSY>. This is only used when implementing
+actions using the low-level API.
+
+For more information on states, see L<guestfs(3)>.
+
=item $h->set_path ($path);
Set the path that libguestfs searches for kernel and initrd.img.
Setting C<path> to C<NULL> restores the default path.
+=item $h->set_qemu ($qemu);
+
+Set the qemu binary that we will use.
+
+The default is chosen when the library was compiled by the
+configure script.
+
+You can also override this by setting the C<LIBGUESTFS_QEMU>
+environment variable.
+
+The string C<qemu> is stashed in the libguestfs handle, so the caller
+must make sure it remains valid for the lifetime of the handle.
+
+Setting C<qemu> to C<NULL> restores the default qemu binary.
+
+=item $h->set_ready ();
+
+This sets the state to C<READY>. This is only used when implementing
+actions using the low-level API.
+
+For more information on states, see L<guestfs(3)>.
+
=item $h->set_verbose ($verbose);
If C<verbose> is true, this turns on verbose messages (to C<stderr>).
B<This command is dangerous. Without careful use you
can easily destroy all your data>.
+=item %statbuf = $h->stat ($path);
+
+Returns file information for the given C<path>.
+
+This is the same as the C<stat(2)> system call.
+
+=item %statbuf = $h->statvfs ($path);
+
+Returns file system statistics for any mounted file system.
+C<path> should be a file or directory in the mounted file system
+(typically it is the mount point itself, but it doesn't need to be).
+
+This is the same as the C<statvfs(2)> system call.
+
=item $h->sync ();
This syncs the disk, so that any writes are flushed through to the
You should always call this if you have modified a disk image, before
closing the handle.
+=item $h->tar_in ($tarfile, $directory);
+
+This command uploads and unpacks local file C<tarfile> (an
+I<uncompressed> tar file) into C<directory>.
+
+To upload a compressed tarball, use C<$h-E<gt>tgz_in>.
+
+=item $h->tar_out ($directory, $tarfile);
+
+This command packs the contents of C<directory> and downloads
+it to local file C<tarfile>.
+
+To download a compressed tarball, use C<$h-E<gt>tgz_out>.
+
+=item $h->tgz_in ($tarball, $directory);
+
+This command uploads and unpacks local file C<tarball> (a
+I<gzip compressed> tar file) into C<directory>.
+
+To upload an uncompressed tarball, use C<$h-E<gt>tar_in>.
+
+=item $h->tgz_out ($directory, $tarball);
+
+This command packs the contents of C<directory> and downloads
+it to local file C<tarball>.
+
+To download an uncompressed tarball, use C<$h-E<gt>tar_out>.
+
=item $h->touch ($path);
Touch acts like the L<touch(1)> command. It can be used to
update the timestamps on a file, or, if the file does not exist,
to create a new zero-length file.
+=item %superblock = $h->tune2fs_l ($device);
+
+This returns the contents of the ext2 or ext3 filesystem superblock
+on C<device>.
+
+It is the same as running C<tune2fs -l device>. See L<tune2fs(8)>
+manpage for more details. The list of fields returned isn't
+clearly defined, and depends on both the version of C<tune2fs>
+that libguestfs was built against, and the filesystem itself.
+
=item $h->umount ($pathordevice);
This unmounts the given filesystem. The filesystem may be
Some internal mounts are not unmounted by this call.
+=item $h->upload ($filename, $remotefilename);
+
+Upload local file C<filename> to C<remotefilename> on the
+filesystem.
+
+C<filename> can also be a named pipe.
+
+See also C<$h-E<gt>download>.
+
=item $h->vgcreate ($volgroup, \@physvols);
This creates an LVM volume group called C<volgroup>