Generated code for blockdev_* calls, RInt64, enhanced tests.

[libguestfs.git] / perl / lib / Sys / Guestfs.pm

diff --git a/perl/lib/Sys/Guestfs.pm b/perl/lib/Sys/Guestfs.pm
index 9d050b4..a351d57 100644 (file)
--- a/perl/lib/Sys/Guestfs.pm
+++ b/perl/lib/Sys/Guestfs.pm
@@ -245,6 +245,85 @@ how files are saved.
 
 Set the value associated with C<path> to C<value>.
 
 
 Set the value associated with C<path> to C<value>.
 

+=item $h->blockdev_flushbufs ($device);
+
+This tells the kernel to flush internal buffers associated
+with C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=item $blocksize = $h->blockdev_getbsz ($device);
+
+This returns the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=item $ro = $h->blockdev_getro ($device);
+
+Returns a boolean indicating if the block device is read-only
+(true if read-only, false if not).
+
+This uses the L<blockdev(8)> command.
+
+=item $sizeinbytes = $h->blockdev_getsize64 ($device);
+
+This returns the size of the device in bytes.
+
+See also C<$h-E<gt>blockdev_getsz>.
+
+This uses the L<blockdev(8)> command.
+
+=item $sectorsize = $h->blockdev_getss ($device);
+
+This returns the size of sectors on a block device.
+Usually 512, but can be larger for modern devices.
+
+(Note, this is not the size in sectors, use C<$h-E<gt>blockdev_getsz>
+for that).
+
+This uses the L<blockdev(8)> command.
+
+=item $sizeinsectors = $h->blockdev_getsz ($device);
+
+This returns the size of the device in units of 512-byte sectors
+(even if the sectorsize isn't 512 bytes ... weird).
+
+See also C<$h-E<gt>blockdev_getss> for the real sector size of
+the device, and C<$h-E<gt>blockdev_getsize64> for the more
+useful I<size in bytes>.
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_rereadpt ($device);
+
+Reread the partition table on C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_setbsz ($device, $blocksize);
+
+This sets the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_setro ($device);
+
+Sets the block device named C<device> to read-only.
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_setrw ($device);
+
+Sets the block device named C<device> to read-write.
+
+This uses the L<blockdev(8)> command.
+

 =item $content = $h->cat ($path);
 
 Return the contents of the file named C<path>.
 =item $content = $h->cat ($path);
 
 Return the contents of the file named C<path>.


@@ -271,6 +350,34 @@ Only numeric uid and gid are supported.  If you want to use
 names, you will need to locate and parse the password file
 yourself (Augeas support makes this relatively easy).
 
 names, you will need to locate and parse the password file
 yourself (Augeas support makes this relatively easy).
 

+=item $output = $h->command (\@arguments);
+
+This call runs a command from the guest filesystem.  The
+filesystem must be mounted, and must contain a compatible
+operating system (ie. something Linux, with the same
+or compatible processor architecture).
+
+The single parameter is an argv-style list of arguments.
+The first element is the name of the program to run.
+Subsequent elements are parameters.  The list must be
+non-empty (ie. must contain a program name).
+
+The C<$PATH> environment variable will contain at least
+C</usr/bin> and C</bin>.  If you require a program from
+another location, you should provide the full path in the
+first parameter.
+
+Shared libraries and data files required by the program
+must be available on filesystems which are mounted in the
+correct places.  It is the caller's responsibility to ensure
+all filesystems that are needed are mounted at the right
+locations.
+
+=item @lines = $h->command_lines (\@arguments);
+
+This is the same as C<$h-E<gt>command>, but splits the
+result into a list of lines.
+

 =item $h->config ($qemuparam, $qemuvalue);
 
 This can be used to add arbitrary qemu command line parameters
 =item $h->config ($qemuparam, $qemuvalue);
 
 This can be used to add arbitrary qemu command line parameters


@@ -374,6 +481,16 @@ hidden files are shown.
 This command is mostly useful for interactive sessions.  Programs
 should probably use C<$h-E<gt>readdir> instead.
 
 This command is mostly useful for interactive sessions.  Programs
 should probably use C<$h-E<gt>readdir> instead.
 

+=item %statbuf = $h->lstat ($path);
+
+Returns file information for the given C<path>.
+
+This is the same as C<$h-E<gt>stat> except that if C<path>
+is a symbolic link, then the link is stat-ed, not the file it
+refers to.
+
+This is the same as the C<lstat(2)> system call.
+

 =item $h->lvcreate ($logvol, $volgroup, $mbytes);
 
 This creates an LVM volume group called C<logvol>
 =item $h->lvcreate ($logvol, $volgroup, $mbytes);
 
 This creates an LVM volume group called C<logvol>


@@ -540,6 +657,20 @@ the string C<,> (comma).
 B<This command is dangerous.  Without careful use you
 can easily destroy all your data>.
 
 B<This command is dangerous.  Without careful use you
 can easily destroy all your data>.
 

+=item %statbuf = $h->stat ($path);
+
+Returns file information for the given C<path>.
+
+This is the same as the C<stat(2)> system call.
+
+=item %statbuf = $h->statvfs ($path);
+
+Returns file system statistics for any mounted file system.
+C<path> should be a file or directory in the mounted file system
+(typically it is the mount point itself, but it doesn't need to be).
+
+This is the same as the C<statvfs(2)> system call.
+

 =item $h->sync ();
 
 This syncs the disk, so that any writes are flushed through to the
 =item $h->sync ();
 
 This syncs the disk, so that any writes are flushed through to the


@@ -554,6 +685,16 @@ Touch acts like the L<touch(1)> command.  It can be used to
 update the timestamps on a file, or, if the file does not exist,
 to create a new zero-length file.
 
 update the timestamps on a file, or, if the file does not exist,
 to create a new zero-length file.
 

+=item %superblock = $h->tune2fs_l ($device);
+
+This returns the contents of the ext2 or ext3 filesystem superblock
+on C<device>.
+
+It is the same as running C<tune2fs -l device>.  See L<tune2fs(8)>
+manpage for more details.  The list of fields returned isn't
+clearly defined, and depends on both the version of C<tune2fs>
+that libguestfs was built against, and the filesystem itself.
+

 =item $h->umount ($pathordevice);
 
 This unmounts the given filesystem.  The filesystem may be
 =item $h->umount ($pathordevice);
 
 This unmounts the given filesystem.  The filesystem may be