just want to read the image or write access if you want to modify the
image).
-This is equivalent to the qemu parameter C<-drive file=filename>.
+This is equivalent to the qemu parameter C<-drive file=filename,cache=off>.
Note that this call checks for the existence of C<filename>. This
stops you from specifying other types of drive which are supported
to look at the file C<daemon/debug.c> in the libguestfs source
to find out what you can do.
+=head2 df
+
+ df
+
+This command runs the C<df> command to report disk space used.
+
+This command is mostly useful for interactive sessions. It
+is I<not> intended that you try to parse the output string.
+Use C<statvfs> from programs.
+
+=head2 df-h
+
+ df-h
+
+This command runs the C<df -h> command to report disk space used
+in human-readable format.
+
+This command is mostly useful for interactive sessions. It
+is I<not> intended that you try to parse the output string.
+Use C<statvfs> from programs.
+
=head2 dmesg
dmesg
This automatically calls L<sync(2)> before the operation,
so that the maximum guest memory is freed.
+=head2 du
+
+ du path
+
+This command runs the C<du -s> command to estimate file space
+usage for C<path>.
+
+C<path> can be a file or a directory. If C<path> is a directory
+then the estimate includes the contents of the directory and all
+subdirectories (recursively).
+
+The result is the estimated size in I<kilobytes>
+(ie. units of 1024 bytes).
+
=head2 e2fsck-f
e2fsck-f device
This returns the verbose messages flag.
+=head2 glob-expand
+
+ glob-expand pattern
+
+This command searches for all the pathnames matching
+C<pattern> according to the wildcard expansion rules
+used by the shell.
+
+If no paths match, then this returns an empty list
+(note: not an error).
+
+It is just a wrapper around the C L<glob(3)> function
+with flags C<GLOB_MARK|GLOB_BRACE>.
+See that manual page for more details.
+
=head2 grub-install
grub-install root device
This command installs GRUB (the Grand Unified Bootloader) on
C<device>, with the root directory being C<root>.
+=head2 head
+
+ head path
+
+This command returns up to the first 10 lines of a file as
+a list of strings.
+
+Because of the message protocol, there is a transfer limit
+of somewhere between 2MB and 4MB. To transfer large files you should use
+FTP.
+
+=head2 head-n
+
+ head-n nrlines path
+
+If the parameter C<nrlines> is a positive number, this returns the first
+C<nrlines> lines of the file C<path>.
+
+If the parameter C<nrlines> is a negative number, this returns lines
+from the file C<path>, excluding the last C<nrlines> lines.
+
+If the parameter C<nrlines> is zero, this returns an empty list.
+
+Because of the message protocol, there is a transfer limit
+of somewhere between 2MB and 4MB. To transfer large files you should use
+FTP.
+
=head2 hexdump
hexdump path
Create a directory named C<path>, creating any parent directories
as necessary. This is like the C<mkdir -p> shell command.
+=head2 mkdtemp
+
+ mkdtemp template
+
+This command creates a temporary directory. The
+C<template> parameter should be a full pathname for the
+temporary directory name with the final six characters being
+"XXXXXX".
+
+For example: "/tmp/myprogXXXXXX" or "/Temp/myprogXXXXXX",
+the second one being suitable for Windows filesystems.
+
+The name of the temporary directory that was created
+is returned.
+
+The temporary directory is created with mode 0700
+and is owned by root.
+
+The caller is responsible for deleting the temporary
+directory and its contents after use.
+
+See also: L<mkdtemp(3)>
+
=head2 mkfs
mkfs fstype device
Remove the single directory C<path>.
+=head2 scrub-device
+
+ scrub-device device
+
+This command writes patterns over C<device> to make data retrieval
+more difficult.
+
+It is an interface to the L<scrub(1)> program. See that
+manual page for more details.
+
+B<This command is dangerous. Without careful use you
+can easily destroy all your data>.
+
+=head2 scrub-file
+
+ scrub-file file
+
+This command writes patterns over a file to make data retrieval
+more difficult.
+
+The file is I<removed> after scrubbing.
+
+It is an interface to the L<scrub(1)> program. See that
+manual page for more details.
+
+=head2 scrub-freespace
+
+ scrub-freespace dir
+
+This command creates the directory C<dir> and then fills it
+with files until the filesystem is full, and scrubs the files
+as for C<scrub-file>, and deletes them.
+The intention is to scrub any free space on the partition
+containing C<dir>.
+
+It is an interface to the L<scrub(1)> program. See that
+manual page for more details.
+
=head2 set-append | append
set-append append
=head2 sfdisk-N
- sfdisk-N device n cyls heads sectors line
+ sfdisk-N device partnum cyls heads sectors line
This runs L<sfdisk(8)> option to modify just the single
partition C<n> (note: C<n> counts from 1).
You should always call this if you have modified a disk image, before
closing the handle.
+=head2 tail
+
+ tail path
+
+This command returns up to the last 10 lines of a file as
+a list of strings.
+
+Because of the message protocol, there is a transfer limit
+of somewhere between 2MB and 4MB. To transfer large files you should use
+FTP.
+
+=head2 tail-n
+
+ tail-n nrlines path
+
+If the parameter C<nrlines> is a positive number, this returns the last
+C<nrlines> lines of the file C<path>.
+
+If the parameter C<nrlines> is a negative number, this returns lines
+from the file C<path>, starting with the C<-nrlines>th line.
+
+If the parameter C<nrlines> is zero, this returns an empty list.
+
+Because of the message protocol, there is a transfer limit
+of somewhere between 2MB and 4MB. To transfer large files you should use
+FTP.
+
=head2 tar-in
tar-in (tarfile|-) directory
List all the volumes groups detected. This is the equivalent
of the L<vgs(8)> command. The "full" version includes all fields.
+=head2 wc-c
+
+ wc-c path
+
+This command counts the characters in a file, using the
+C<wc -c> external command.
+
+=head2 wc-l
+
+ wc-l path
+
+This command counts the lines in a file, using the
+C<wc -l> external command.
+
+=head2 wc-w
+
+ wc-w path
+
+This command counts the words in a file, using the
+C<wc -w> external command.
+
=head2 write-file
write-file path content size
to securely wipe the device). It should be sufficient to remove
any partition tables, filesystem superblocks and so on.
+See also: C<scrub-device>.
+
=head2 zerofree
zerofree device
git.annexia.org / libguestfs.git / blobdiff