Set the value associated with C<path> to C<value>.
+=head2 blockdev-flushbufs
+
+ blockdev-flushbufs device
+
+This tells the kernel to flush internal buffers associated
+with C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getbsz
+
+ blockdev-getbsz device
+
+This returns the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getro
+
+ blockdev-getro device
+
+Returns a boolean indicating if the block device is read-only
+(true if read-only, false if not).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getsize64
+
+ blockdev-getsize64 device
+
+This returns the size of the device in bytes.
+
+See also C<blockdev_getsz>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getss
+
+ blockdev-getss device
+
+This returns the size of sectors on a block device.
+Usually 512, but can be larger for modern devices.
+
+(Note, this is not the size in sectors, use C<blockdev_getsz>
+for that).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getsz
+
+ blockdev-getsz device
+
+This returns the size of the device in units of 512-byte sectors
+(even if the sectorsize isn't 512 bytes ... weird).
+
+See also C<blockdev_getss> for the real sector size of
+the device, and C<blockdev_getsize64> for the more
+useful I<size in bytes>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-rereadpt
+
+ blockdev-rereadpt device
+
+Reread the partition table on C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-setbsz
+
+ blockdev-setbsz device blocksize
+
+This sets the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-setro
+
+ blockdev-setro device
+
+Sets the block device named C<device> to read-only.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-setrw
+
+ blockdev-setrw device
+
+Sets the block device named C<device> to read-write.
+
+This uses the L<blockdev(8)> command.
+
=head2 cat
cat path
Note that this function cannot correctly handle binary files
(specifically, files containing C<\0> character which is treated
-as end of string). For those you need to use the C<read_file>
+as end of string). For those you need to use the C<download>
function which has a more complex interface.
+Because of the message protocol, there is a transfer limit
+of somewhere between 2MB and 4MB. To transfer large files you should use
+FTP.
+
=head2 chmod
chmod mode path
names, you will need to locate and parse the password file
yourself (Augeas support makes this relatively easy).
+=head2 command
+
+ command arguments,...
+
+This call runs a command from the guest filesystem. The
+filesystem must be mounted, and must contain a compatible
+operating system (ie. something Linux, with the same
+or compatible processor architecture).
+
+The single parameter is an argv-style list of arguments.
+The first element is the name of the program to run.
+Subsequent elements are parameters. The list must be
+non-empty (ie. must contain a program name).
+
+The C<$PATH> environment variable will contain at least
+C</usr/bin> and C</bin>. If you require a program from
+another location, you should provide the full path in the
+first parameter.
+
+Shared libraries and data files required by the program
+must be available on filesystems which are mounted in the
+correct places. It is the caller's responsibility to ensure
+all filesystems that are needed are mounted at the right
+locations.
+
+=head2 command-lines
+
+ command-lines arguments,...
+
+This is the same as C<command>, but splits the
+result into a list of lines.
+
=head2 config
config qemuparam qemuvalue
C<value> can be NULL.
+=head2 exists
+
+ exists path
+
+This returns C<true> if and only if there is a file, directory
+(or anything) with the given C<path> name.
+
+See also C<is_file>, C<is_dir>, C<stat>.
+
+=head2 file
+
+ file path
+
+This call uses the standard L<file(1)> command to determine
+the type or contents of the file. This also works on devices,
+for example to find out whether a partition contains a filesystem.
+
+The exact command which runs is C<file -bsL path>. Note in
+particular that the filename is not prepended to the output
+(the C<-b> option).
+
=head2 get-autosync
get-autosync
This returns the verbose messages flag.
+=head2 is-dir
+
+ is-dir path
+
+This returns C<true> if and only if there is a directory
+with the given C<path> name. Note that it returns false for
+other objects like files.
+
+See also C<stat>.
+
+=head2 is-file
+
+ is-file path
+
+This returns C<true> if and only if there is a file
+with the given C<path> name. Note that it returns false for
+other objects like directories.
+
+See also C<stat>.
+
=head2 kill-subprocess
kill-subprocess
This command is mostly useful for interactive sessions. Programs
should probably use C<readdir> instead.
+=head2 lstat
+
+ lstat path
+
+Returns file information for the given C<path>.
+
+This is the same as C<stat> except that if C<path>
+is a symbolic link, then the link is stat-ed, not the file it
+refers to.
+
+This is the same as the C<lstat(2)> system call.
+
+=head2 lvcreate
+
+ lvcreate logvol volgroup mbytes
+
+This creates an LVM volume group called C<logvol>
+on the volume group C<volgroup>, with C<size> megabytes.
+
+=head2 lvm-remove-all
+
+ lvm-remove-all
+
+This command removes all LVM logical volumes, volume groups
+and physical volumes.
+
+B<This command is dangerous. Without careful use you
+can easily destroy all your data>.
+
=head2 lvs
lvs
Create a directory named C<path>, creating any parent directories
as necessary. This is like the C<mkdir -p> shell command.
+=head2 mkfs
+
+ mkfs fstype device
+
+This creates a filesystem on C<device> (usually a partition
+of LVM logical volume). The filesystem type is C<fstype>, for
+example C<ext3>.
+
=head2 mount
mount device mountpoint
The filesystem options C<sync> and C<noatime> are set with this
call, in order to improve reliability.
+=head2 mounts
+
+ mounts
+
+This returns the list of currently mounted filesystems. It returns
+the list of devices (eg. C</dev/sda1>, C</dev/VG/LV>).
+
+Some internal mounts are not shown.
+
+=head2 pvcreate
+
+ pvcreate device
+
+This creates an LVM physical volume on the named C<device>,
+where C<device> should usually be a partition name such
+as C</dev/sda1>.
+
=head2 pvs
pvs
Verbose messages are disabled unless the environment variable
C<LIBGUESTFS_DEBUG> is defined and set to C<1>.
+=head2 sfdisk
+
+ sfdisk device cyls heads sectors lines,...
+
+This is a direct interface to the L<sfdisk(8)> program for creating
+partitions on block devices.
+
+C<device> should be a block device, for example C</dev/sda>.
+
+C<cyls>, C<heads> and C<sectors> are the number of cylinders, heads
+and sectors on the device, which are passed directly to sfdisk as
+the I<-C>, I<-H> and I<-S> parameters. If you pass C<0> for any
+of these, then the corresponding parameter is omitted. Usually for
+'large' disks, you can just pass C<0> for these, but for small
+(floppy-sized) disks, sfdisk (or rather, the kernel) cannot work
+out the right geometry and you will need to tell it.
+
+C<lines> is a list of lines that we feed to C<sfdisk>. For more
+information refer to the L<sfdisk(8)> manpage.
+
+To create a single partition occupying the whole disk, you would
+pass C<lines> as a single element list, when the single element being
+the string C<,> (comma).
+
+B<This command is dangerous. Without careful use you
+can easily destroy all your data>.
+
+=head2 stat
+
+ stat path
+
+Returns file information for the given C<path>.
+
+This is the same as the C<stat(2)> system call.
+
+=head2 statvfs
+
+ statvfs path
+
+Returns file system statistics for any mounted file system.
+C<path> should be a file or directory in the mounted file system
+(typically it is the mount point itself, but it doesn't need to be).
+
+This is the same as the C<statvfs(2)> system call.
+
=head2 sync
sync
update the timestamps on a file, or, if the file does not exist,
to create a new zero-length file.
+=head2 tune2fs-l
+
+ tune2fs-l device
+
+This returns the contents of the ext2 or ext3 filesystem superblock
+on C<device>.
+
+It is the same as running C<tune2fs -l device>. See L<tune2fs(8)>
+manpage for more details. The list of fields returned isn't
+clearly defined, and depends on both the version of C<tune2fs>
+that libguestfs was built against, and the filesystem itself.
+
+=head2 umount | unmount
+
+ umount pathordevice
+
+This unmounts the given filesystem. The filesystem may be
+specified either by its mountpoint (path) or the device which
+contains the filesystem.
+
+=head2 umount-all | unmount-all
+
+ umount-all
+
+This unmounts all mounted filesystems.
+
+Some internal mounts are not unmounted by this call.
+
+=head2 vgcreate
+
+ vgcreate volgroup physvols,...
+
+This creates an LVM volume group called C<volgroup>
+from the non-empty list of physical volumes C<physvols>.
+
=head2 vgs
vgs
List all the volumes groups detected. This is the equivalent
of the L<vgs(8)> command. The "full" version includes all fields.
+=head2 write-file
+
+ write-file path content size
+
+This call creates a file called C<path>. The contents of the
+file is the string C<content> (which can contain any 8 bit data),
+with length C<size>.
+
+As a special case, if C<size> is C<0>
+then the length is calculated using C<strlen> (so in this case
+the content cannot contain embedded ASCII NULs).
+
+Because of the message protocol, there is a transfer limit
+of somewhere between 2MB and 4MB. To transfer large files you should use
+FTP.
+
git.annexia.org / libguestfs.git / blobdiff