guestfish -i disk.img [disk.img ...]
+=head1 WARNING
+
+Using guestfish in read/write mode on live virtual machines can be
+dangerous, potentially causing disk corruption. Use the I<--ro>
+(read-only) option to use guestfish safely if the disk image or
+virtual machine might be live.
+
=head1 EXAMPLES
=head2 As an interactive shell
add disk.img
run
mount /dev/vg_guest/lv_root /
- write_file /etc/motd "Welcome, new users" 0
+ write /etc/motd "Welcome, new users"
_EOF_
List the LVM logical volumes in a guest:
guestfish \
add disk.img : run : mount /dev/vg_guest/lv_root / : \
- write-file /etc/resolv.conf "nameserver 1.2.3.4" 0
+ write /etc/resolv.conf "nameserver 1.2.3.4"
Edit C</boot/grub/grub.conf> interactively:
rescue a broken virtual machine image, you should look at the
L<virt-rescue(1)> command.
-Using guestfish in read/write mode on live virtual machines can be
-dangerous, potentially causing disk corruption. Use the I<--ro>
-(read-only) option to use guestfish safely if the disk image or
-virtual machine might be live.
-
=head1 OPTIONS
=over 4
=head1 NUMBERS
-Commands which take integers as parameters use the C convention which
-is to use C<0> to prefix an octal number or C<0x> to prefix a
-hexadecimal number. For example:
+This section applies to all commands which can take integers
+as parameters.
+
+=head2 SIZE SUFFIX
+
+When the command takes a parameter measured in bytes, you can use one
+of the following suffixes to specify kilobytes, megabytes and larger
+sizes:
+
+=over 4
+
+=item B<k> or B<K> or B<KiB>
+
+The size in kilobytes (multiplied by 1024).
+
+=item B<KB>
+
+The size in SI 1000 byte units.
+
+=item B<M> or B<MiB>
+
+The size in megabytes (multiplied by 1048576).
+
+=item B<MB>
+
+The size in SI 1000000 byte units.
+
+=item B<G> or B<GiB>
+
+The size in gigabytes (multiplied by 2**30).
+
+=item B<GB>
+
+The size in SI 10**9 byte units.
+
+=item B<T> or B<TiB>
+
+The size in terabytes (multiplied by 2**40).
+
+=item B<TB>
+
+The size in SI 10**12 byte units.
+
+=item B<P> or B<PiB>
+
+The size in petabytes (multiplied by 2**50).
+
+=item B<PB>
+
+The size in SI 10**15 byte units.
+
+=item B<E> or B<EiB>
+
+The size in exabytes (multiplied by 2**60).
+
+=item B<EB>
+
+The size in SI 10**18 byte units.
+
+=item B<Z> or B<ZiB>
+
+The size in zettabytes (multiplied by 2**70).
+
+=item B<ZB>
+
+The size in SI 10**21 byte units.
+
+=item B<Y> or B<YiB>
+
+The size in yottabytes (multiplied by 2**80).
+
+=item B<YB>
+
+The size in SI 10**24 byte units.
+
+=back
+
+For example:
+
+ truncate-size /file 1G
+
+would truncate the file to 1 gigabyte.
+
+Be careful because a few commands take sizes in kilobytes or megabytes
+(eg. the parameter to L</memsize> is specified in megabytes already).
+Adding a suffix will probably not do what you expect.
+
+=head2 OCTAL AND HEXADECIMAL NUMBERS
+
+For specifying the radix (base) use the C convention: C<0> to prefix
+an octal number or C<0x> to prefix a hexadecimal number. For example:
1234 decimal number 1234
02322 octal number, equivalent to decimal 1234
For more advanced image creation, see L<qemu-img(1)> utility.
-Size can be specified (where C<nn> means a number):
-
-=over 4
-
-=item C<nn> or C<nn>K or C<nn>KB
-
-number of kilobytes, eg: C<1440> = standard 3.5in floppy
-
-=item C<nn>M or C<nn>MB
-
-number of megabytes
-
-=item C<nn>G or C<nn>GB
-
-number of gigabytes
-
-=item C<nn>T or C<nn>TB
-
-number of terabytes
-
-=item C<nn>P or C<nn>PB
-
-number of petabytes
-
-=item C<nn>E or C<nn>EB
-
-number of exabytes
-
-=item C<nn>sects
-
-number of 512 byte sectors
-
-=back
+Size can be specified using standard suffixes, eg. C<1M>.
=head2 echo
For more advanced image creation, see L<qemu-img(1)> utility.
-Size can be specified (where C<nn> means a number):
-
-=over 4
-
-=item C<nn> or C<nn>K or C<nn>KB
-
-number of kilobytes, eg: C<1440> = standard 3.5in floppy
-
-=item C<nn>M or C<nn>MB
-
-number of megabytes
-
-=item C<nn>G or C<nn>GB
-
-number of gigabytes
-
-=item C<nn>T or C<nn>TB
-
-number of terabytes
+Size can be specified using standard suffixes, eg. C<1M>.
-=item C<nn>P or C<nn>PB
+=head2 supported
-number of petabytes
+ supported
-=item C<nn>E or C<nn>EB
+This command returns a list of the optional groups
+known to the daemon, and indicates which ones are
+supported by this build of the libguestfs appliance.
-number of exabytes
-
-=item C<nn>sects
-
-number of 512 byte sectors
-
-=back
+See also L<guestfs(3)/AVAILABILITY>.
=head2 time
@ACTIONS@
+=head1 EXIT CODE
+
+guestfish returns 0 if the commands completed without error, or
+1 if there was an error.
+
=head1 ENVIRONMENT VARIABLES
=over 4
=item HOME
-If compiled with GNU readline support, then the command history
-is saved in C<$HOME/.guestfish>
+If compiled with GNU readline support, various files in the
+home directory can be used. See L</FILES>.
=item LIBGUESTFS_APPEND
=back
-=head1 EXIT CODE
+=head1 FILES
-guestfish returns 0 if the commands completed without error, or
-1 if there was an error.
+=over 4
+
+=item $HOME/.guestfish
+
+If compiled with GNU readline support, then the command history
+is saved in this file.
+
+=item $HOME/.inputrc
+
+=item /etc/inputrc
+
+If compiled with GNU readline support, then these files can be used to
+configure readline. For further information, please see
+L<readline(3)/INITIALIZATION FILE>.
+
+To write rules which only apply to guestfish, use:
+
+ $if guestfish
+ ...
+ $endif
+
+Variables that you can set in inputrc that change the behaviour
+of guestfish in useful ways include:
+
+=over 4
+
+=item completion-ignore-case (default: on)
+
+By default, guestfish will ignore case when tab-completing
+paths on the disk. Use:
+
+ set completion-ignore-case off
+
+to make guestfish case sensitive.
+
+=back
+
+=item test1.img
+
+=item test2.img (etc)
+
+When using the C<-N> or C<--new> option, the prepared disk or
+filesystem will be created in the file C<test1.img> in the current
+directory. The second use of C<-N> will use C<test2.img> and so on.
+Any existing file with the same name will be overwritten.
+
+=back
=head1 SEE ALSO
git.annexia.org / libguestfs.git / blobdiff