list_builtin_commands ();
printf ("%-20s %s\n", "add-cdrom", "add a CD-ROM disk image to examine");
printf ("%-20s %s\n", "add-drive", "add an image to examine or modify");
+ printf ("%-20s %s\n", "add-drive-ro", "add a drive in snapshot mode (read-only)");
printf ("%-20s %s\n", "aug-close", "close the current Augeas handle");
printf ("%-20s %s\n", "aug-defnode", "define an Augeas node");
printf ("%-20s %s\n", "aug-defvar", "define an Augeas variable");
printf ("%-20s %s\n", "command", "run a command from the guest filesystem");
printf ("%-20s %s\n", "command-lines", "run a command, returning lines");
printf ("%-20s %s\n", "config", "add qemu parameters");
+ printf ("%-20s %s\n", "cp", "copy a file");
+ printf ("%-20s %s\n", "cp-a", "copy a file or directory recursively");
printf ("%-20s %s\n", "debug", "debugging and internals");
+ printf ("%-20s %s\n", "dmesg", "return kernel messages");
printf ("%-20s %s\n", "download", "download a file to the local machine");
+ printf ("%-20s %s\n", "drop-caches", "drop kernel page cache, dentries and inodes");
+ printf ("%-20s %s\n", "e2fsck-f", "check an ext2/ext3 filesystem");
+ printf ("%-20s %s\n", "equal", "test if two files have equal contents");
printf ("%-20s %s\n", "exists", "test if file or directory exists");
printf ("%-20s %s\n", "file", "determine file type");
+ printf ("%-20s %s\n", "find", "find all files and directories");
+ printf ("%-20s %s\n", "fsck", "run the filesystem checker");
+ printf ("%-20s %s\n", "get-append", "get the additional kernel options");
printf ("%-20s %s\n", "get-autosync", "get autosync mode");
+ printf ("%-20s %s\n", "get-e2label", "get the ext2/3/4 filesystem label");
+ printf ("%-20s %s\n", "get-e2uuid", "get the ext2/3/4 filesystem UUID");
printf ("%-20s %s\n", "get-path", "get the search path");
printf ("%-20s %s\n", "get-qemu", "get the qemu binary");
printf ("%-20s %s\n", "get-state", "get the current state");
printf ("%-20s %s\n", "get-verbose", "get verbose mode");
+ printf ("%-20s %s\n", "glob-expand", "expand a wildcard path");
+ printf ("%-20s %s\n", "grub-install", "install GRUB");
+ printf ("%-20s %s\n", "hexdump", "dump a file in hexadecimal");
printf ("%-20s %s\n", "is-busy", "is busy processing a command");
printf ("%-20s %s\n", "is-config", "is in configuration state");
printf ("%-20s %s\n", "is-dir", "test if file exists");
printf ("%-20s %s\n", "lvcreate", "create an LVM volume group");
printf ("%-20s %s\n", "lvm-remove-all", "remove all LVM LVs, VGs and PVs");
printf ("%-20s %s\n", "lvremove", "remove an LVM logical volume");
+ printf ("%-20s %s\n", "lvresize", "resize an LVM logical volume");
printf ("%-20s %s\n", "lvs", "list the LVM logical volumes (LVs)");
printf ("%-20s %s\n", "lvs-full", "list the LVM logical volumes (LVs)");
printf ("%-20s %s\n", "mkdir", "create a directory");
printf ("%-20s %s\n", "mount-ro", "mount a guest disk, read-only");
printf ("%-20s %s\n", "mount-vfs", "mount a guest disk with mount options and vfstype");
printf ("%-20s %s\n", "mounts", "show mounted filesystems");
+ printf ("%-20s %s\n", "mv", "move a file");
+ printf ("%-20s %s\n", "ntfs-3g-probe", "probe NTFS volume");
+ printf ("%-20s %s\n", "ping-daemon", "ping the guest daemon");
printf ("%-20s %s\n", "pvcreate", "create an LVM physical volume");
printf ("%-20s %s\n", "pvremove", "remove an LVM physical volume");
+ printf ("%-20s %s\n", "pvresize", "resize an LVM physical volume");
printf ("%-20s %s\n", "pvs", "list the LVM physical volumes (PVs)");
printf ("%-20s %s\n", "pvs-full", "list the LVM physical volumes (PVs)");
printf ("%-20s %s\n", "read-lines", "read file as lines");
+ printf ("%-20s %s\n", "resize2fs", "resize an ext2/ext3 filesystem");
printf ("%-20s %s\n", "rm", "remove a file");
printf ("%-20s %s\n", "rm-rf", "remove a file or directory recursively");
printf ("%-20s %s\n", "rmdir", "remove a directory");
+ printf ("%-20s %s\n", "set-append", "add options to kernel command line");
printf ("%-20s %s\n", "set-autosync", "set autosync mode");
+ printf ("%-20s %s\n", "set-e2label", "set the ext2/3/4 filesystem label");
+ printf ("%-20s %s\n", "set-e2uuid", "set the ext2/3/4 filesystem UUID");
printf ("%-20s %s\n", "set-path", "set the search path");
printf ("%-20s %s\n", "set-qemu", "set the qemu binary");
printf ("%-20s %s\n", "set-verbose", "set verbose mode");
printf ("%-20s %s\n", "sfdisk", "create partitions on a block device");
+ printf ("%-20s %s\n", "sfdisk-N", "modify a single partition on a block device");
+ printf ("%-20s %s\n", "sfdisk-disk-geometry", "display the disk geometry from the partition table");
+ printf ("%-20s %s\n", "sfdisk-kernel-geometry", "display the kernel geometry");
+ printf ("%-20s %s\n", "sfdisk-l", "display the partition table");
+ printf ("%-20s %s\n", "sh", "run a command via the shell");
+ printf ("%-20s %s\n", "sh-lines", "run a command via the shell returning lines");
+ printf ("%-20s %s\n", "sleep", "sleep for some seconds");
printf ("%-20s %s\n", "stat", "get file information");
printf ("%-20s %s\n", "statvfs", "get file system statistics");
+ printf ("%-20s %s\n", "strings", "print the printable strings in a file");
+ printf ("%-20s %s\n", "strings-e", "print the printable strings in a file");
printf ("%-20s %s\n", "sync", "sync disks, writes are flushed through to the disk image");
printf ("%-20s %s\n", "tar-in", "unpack tarfile to directory");
printf ("%-20s %s\n", "tar-out", "pack directory into tarfile");
printf ("%-20s %s\n", "umount", "unmount a filesystem");
printf ("%-20s %s\n", "umount-all", "unmount all filesystems");
printf ("%-20s %s\n", "upload", "upload a file from the local machine");
+ printf ("%-20s %s\n", "vg-activate", "activate or deactivate some volume groups");
+ printf ("%-20s %s\n", "vg-activate-all", "activate or deactivate all volume groups");
printf ("%-20s %s\n", "vgcreate", "create an LVM volume group");
printf ("%-20s %s\n", "vgremove", "remove an LVM volume group");
printf ("%-20s %s\n", "vgs", "list the LVM volume groups (VGs)");
printf ("%-20s %s\n", "vgs-full", "list the LVM volume groups (VGs)");
printf ("%-20s %s\n", "write-file", "create a file");
+ printf ("%-20s %s\n", "zero", "write zeroes to the device");
+ printf ("%-20s %s\n", "zerofree", "zero unused inodes and disk blocks on ext2/3 filesystem");
printf (" Use -h <cmd> / help <cmd> to show detailed help for a command.\n");
}
pod2text ("kill-subprocess - kill the qemu subprocess", " kill-subprocess\n\nThis kills the qemu subprocess. You should never need to call this.");
else
if (strcasecmp (cmd, "add_drive") == 0 || strcasecmp (cmd, "add-drive") == 0 || strcasecmp (cmd, "add") == 0)
- pod2text ("add-drive - add an image to examine or modify", " add-drive <filename>\n\nThis function adds a virtual machine disk image C<filename> to the\nguest. The first time you call this function, the disk appears as IDE\ndisk 0 (C</dev/sda>) in the guest, the second time as C</dev/sdb>, and\nso on.\n\nYou don't necessarily need to be root when using libguestfs. However\nyou obviously do need sufficient permissions to access the filename\nfor whatever operations you want to perform (ie. read access if you\njust want to read the image or write access if you want to modify the\nimage).\n\nThis is equivalent to the qemu parameter C<-drive file=filename>.\n\nYou can use 'add' as an alias for this command.");
+ pod2text ("add-drive - add an image to examine or modify", " add-drive <filename>\n\nThis function adds a virtual machine disk image C<filename> to the\nguest. The first time you call this function, the disk appears as IDE\ndisk 0 (C</dev/sda>) in the guest, the second time as C</dev/sdb>, and\nso on.\n\nYou don't necessarily need to be root when using libguestfs. However\nyou obviously do need sufficient permissions to access the filename\nfor whatever operations you want to perform (ie. read access if you\njust want to read the image or write access if you want to modify the\nimage).\n\nThis is equivalent to the qemu parameter C<-drive file=filename>.\n\nNote that this call checks for the existence of C<filename>. This\nstops you from specifying other types of drive which are supported\nby qemu such as C<nbd:> and C<http:> URLs. To specify those, use\nthe general C<config> call instead.\n\nYou can use 'add' as an alias for this command.");
else
if (strcasecmp (cmd, "add_cdrom") == 0 || strcasecmp (cmd, "add-cdrom") == 0 || strcasecmp (cmd, "cdrom") == 0)
- pod2text ("add-cdrom - add a CD-ROM disk image to examine", " add-cdrom <filename>\n\nThis function adds a virtual CD-ROM disk image to the guest.\n\nThis is equivalent to the qemu parameter C<-cdrom filename>.\n\nYou can use 'cdrom' as an alias for this command.");
+ pod2text ("add-cdrom - add a CD-ROM disk image to examine", " add-cdrom <filename>\n\nThis function adds a virtual CD-ROM disk image to the guest.\n\nThis is equivalent to the qemu parameter C<-cdrom filename>.\n\nNote that this call checks for the existence of C<filename>. This\nstops you from specifying other types of drive which are supported\nby qemu such as C<nbd:> and C<http:> URLs. To specify those, use\nthe general C<config> call instead.\n\nYou can use 'cdrom' as an alias for this command.");
+ else
+ if (strcasecmp (cmd, "add_drive_ro") == 0 || strcasecmp (cmd, "add-drive-ro") == 0 || strcasecmp (cmd, "add-ro") == 0)
+ pod2text ("add-drive-ro - add a drive in snapshot mode (read-only)", " add-drive-ro <filename>\n\nThis adds a drive in snapshot mode, making it effectively\nread-only.\n\nNote that writes to the device are allowed, and will be seen for\nthe duration of the guestfs handle, but they are written\nto a temporary file which is discarded as soon as the guestfs\nhandle is closed. We don't currently have any method to enable\nchanges to be committed, although qemu can support this.\n\nThis is equivalent to the qemu parameter\nC<-drive file=filename,snapshot=on>.\n\nNote that this call checks for the existence of C<filename>. This\nstops you from specifying other types of drive which are supported\nby qemu such as C<nbd:> and C<http:> URLs. To specify those, use\nthe general C<config> call instead.\n\nYou can use 'add-ro' as an alias for this command.");
else
if (strcasecmp (cmd, "config") == 0)
pod2text ("config - add qemu parameters", " config <qemuparam> <qemuvalue>\n\nThis can be used to add arbitrary qemu command line parameters\nof the form C<-param value>. Actually it's not quite arbitrary - we\nprevent you from setting some parameters which would interfere with\nparameters that we use.\n\nThe first character of C<param> string must be a C<-> (dash).\n\nC<value> can be NULL.");
else
if (strcasecmp (cmd, "set_qemu") == 0 || strcasecmp (cmd, "set-qemu") == 0 || strcasecmp (cmd, "qemu") == 0)
- pod2text ("set-qemu - set the qemu binary", " set-qemu <qemu>\n\nSet the qemu binary that we will use.\n\nThe default is chosen when the library was compiled by the\nconfigure script.\n\nYou can also override this by setting the C<LIBGUESTFS_QEMU>\nenvironment variable.\n\nThe string C<qemu> is stashed in the libguestfs handle, so the caller\nmust make sure it remains valid for the lifetime of the handle.\n\nSetting C<qemu> to C<NULL> restores the default qemu binary.\n\nYou can use 'qemu' as an alias for this command.");
+ pod2text ("set-qemu - set the qemu binary", " set-qemu <qemu>\n\nSet the qemu binary that we will use.\n\nThe default is chosen when the library was compiled by the\nconfigure script.\n\nYou can also override this by setting the C<LIBGUESTFS_QEMU>\nenvironment variable.\n\nSetting C<qemu> to C<NULL> restores the default qemu binary.\n\nYou can use 'qemu' as an alias for this command.");
else
if (strcasecmp (cmd, "get_qemu") == 0 || strcasecmp (cmd, "get-qemu") == 0)
pod2text ("get-qemu - get the qemu binary", " get-qemu\n\nReturn the current qemu binary.\n\nThis is always non-NULL. If it wasn't set already, then this will\nreturn the default qemu binary name.");
else
if (strcasecmp (cmd, "set_path") == 0 || strcasecmp (cmd, "set-path") == 0 || strcasecmp (cmd, "path") == 0)
- pod2text ("set-path - set the search path", " set-path <path>\n\nSet the path that libguestfs searches for kernel and initrd.img.\n\nThe default is C<$libdir/guestfs> unless overridden by setting\nC<LIBGUESTFS_PATH> environment variable.\n\n
The string C<path> is stashed in the libguestfs handle, so the caller\nmust make sure it remains valid for the lifetime of the handle.\n\nSetting C<path> to C<NULL> restores the default path.\n\nYou can use 'path' as an alias for this command.");
+ pod2text ("set-path - set the search path", " set-path <path>\n\nSet the path that libguestfs searches for kernel and initrd.img.\n\nThe default is C<$libdir/guestfs> unless overridden by setting\nC<LIBGUESTFS_PATH> environment variable.\n\nSetting C<path> to C<NULL> restores the default path.\n\nYou can use 'path' as an alias for this command.");
else
if (strcasecmp (cmd, "get_path") == 0 || strcasecmp (cmd, "get-path") == 0)
pod2text ("get-path - get the search path", " get-path\n\nReturn the current search path.\n\nThis is always non-NULL. If it wasn't set already, then this will\nreturn the default path.");
else
+ if (strcasecmp (cmd, "set_append") == 0 || strcasecmp (cmd, "set-append") == 0 || strcasecmp (cmd, "append") == 0)
+ pod2text ("set-append - add options to kernel command line", " set-append <append>\n\nThis function is used to add additional options to the\nguest kernel command line.\n\nThe default is C<NULL> unless overridden by setting\nC<LIBGUESTFS_APPEND> environment variable.\n\nSetting C<append> to C<NULL> means I<no> additional options\nare passed (libguestfs always adds a few of its own).\n\nYou can use 'append' as an alias for this command.");
+ else
+ if (strcasecmp (cmd, "get_append") == 0 || strcasecmp (cmd, "get-append") == 0)
+ pod2text ("get-append - get the additional kernel options", " get-append\n\nReturn the additional kernel options which are added to the\nguest kernel command line.\n\nIf C<NULL> then no options are added.");
+ else
if (strcasecmp (cmd, "set_autosync") == 0 || strcasecmp (cmd, "set-autosync") == 0 || strcasecmp (cmd, "autosync") == 0)
- pod2text ("set-autosync - set autosync mode", " set-autosync <autosync>\n\nIf C<autosync> is true, this enables autosync. Libguestfs will make a\nbest effort attempt to run C<sync> when the handle is closed\n(also if the program exits without closing handles).\n\nYou can use 'autosync' as an alias for this command.");
+ pod2text ("set-autosync - set autosync mode", " set-autosync <autosync>\n\nIf C<autosync> is true, this enables autosync. Libguestfs will make a\nbest effort attempt to run C<umount_all> followed by\nC<sync> when the handle is closed\n(also if the program exits without closing handles).\n\nThis is disabled by default (except in guestfish where it is\nenabled by default).\n\nYou can use 'autosync' as an alias for this command.");
else
if (strcasecmp (cmd, "get_autosync") == 0 || strcasecmp (cmd, "get-autosync") == 0)
pod2text ("get-autosync - get autosync mode", " get-autosync\n\nGet the autosync flag.");
pod2text ("lvcreate - create an LVM volume group", " lvcreate <logvol> <volgroup> <mbytes>\n\nThis creates an LVM volume group called C<logvol>\non the volume group C<volgroup>, with C<size> megabytes.");
else
if (strcasecmp (cmd, "mkfs") == 0)
- pod2text ("mkfs - make a filesystem", " mkfs <fstype> <device>\n\nThis creates a filesystem on C<device> (usually a partition\nof LVM logical volume). The filesystem type is C<fstype>, for\nexample C<ext3>.");
+ pod2text ("mkfs - make a filesystem", " mkfs <fstype> <device>\n\nThis creates a filesystem on C<device> (usually a partition\nor LVM logical volume). The filesystem type is C<fstype>, for\nexample C<ext3>.");
else
if (strcasecmp (cmd, "sfdisk") == 0)
- pod2text ("sfdisk - create partitions on a block device", " sfdisk <device> <cyls> <heads> <sectors> <lines>\n\nThis is a direct interface to the L<sfdisk(8)> program for creating\npartitions on block devices.\n\nC<device> should be a block device, for example C</dev/sda>.\n\nC<cyls>, C<heads> and C<sectors> are the number of cylinders, heads\nand sectors on the device, which are passed directly to sfdisk as\nthe I<-C>, I<-H> and I<-S> parameters. If you pass C<0> for any\nof these, then the corresponding parameter is omitted. Usually for\n'large' disks, you can just pass C<0> for these, but for small\n(floppy-sized) disks, sfdisk (or rather, the kernel) cannot work\nout the right geometry and you will need to tell it.\n\nC<lines> is a list of lines that we feed to C<sfdisk>. For more\ninformation refer to the L<sfdisk(8)> manpage.\n\nTo create a single partition occupying the whole disk, you would\npass C<lines> as a single element list, when the single element being\nthe string C<,> (comma).\n\nB<This command is dangerous. Without careful use you\ncan easily destroy all your data>.");
+ pod2text ("sfdisk - create partitions on a block device", " sfdisk <device> <cyls> <heads> <sectors> <lines>\n\nThis is a direct interface to the L<sfdisk(8)> program for creating\npartitions on block devices.\n\nC<device> should be a block device, for example C</dev/sda>.\n\nC<cyls>, C<heads> and C<sectors> are the number of cylinders, heads\nand sectors on the device, which are passed directly to sfdisk as\nthe I<-C>, I<-H> and I<-S> parameters. If you pass C<0> for any\nof these, then the corresponding parameter is omitted. Usually for\n'large' disks, you can just pass C<0> for these, but for small\n(floppy-sized) disks, sfdisk (or rather, the kernel) cannot work\nout the right geometry and you will need to tell it.\n\nC<lines> is a list of lines that we feed to C<sfdisk>. For more\ninformation refer to the L<sfdisk(8)> manpage.\n\nTo create a single partition occupying the whole disk, you would\npass C<lines> as a single element list, when the single element being\nthe string C<,> (comma).\n\nSee also: C<sfdisk_l>, C<sfdisk_N>\n\nB<This command is dangerous. Without careful use you\ncan easily destroy all your data>.");
else
if (strcasecmp (cmd, "write_file") == 0 || strcasecmp (cmd, "write-file") == 0)
- pod2text ("write-file - create a file", " write-file <path> <content> <size>\n\nThis call creates a file called C<path>. The contents of the\nfile is the string C<content> (which can contain any 8 bit data),\nwith length C<size>.\n\nAs a special case, if C<size> is C<0>\nthen the length is calculated using C<strlen> (so in this case\nthe content cannot contain embedded ASCII NULs).\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
+ pod2text ("write-file - create a file", " write-file <path> <content> <size>\n\nThis call creates a file called C<path>. The contents of the\nfile is the string C<content> (which can contain any 8 bit data),\nwith length C<size>.\n\nAs a special case, if C<size> is C<0>\nthen the length is calculated using C<strlen> (so in this case\nthe content cannot contain embedded ASCII NULs).\n\nI<NB.> Owing to a bug, writing content containing ASCII NUL\ncharacters does I<not> work, even if the length is specified.\nWe hope to resolve this bug in a future version. In the meantime\nuse C<upload>.\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
else
if (strcasecmp (cmd, "umount") == 0 || strcasecmp (cmd, "unmount") == 0)
pod2text ("umount - unmount a filesystem", " umount <pathordevice>\n\nThis unmounts the given filesystem. The filesystem may be\nspecified either by its mountpoint (path) or the device which\ncontains the filesystem.\n\nYou can use 'unmount' as an alias for this command.");
pod2text ("file - determine file type", " file <path>\n\nThis call uses the standard L<file(1)> command to determine\nthe type or contents of the file. This also works on devices,\nfor example to find out whether a partition contains a filesystem.\n\nThe exact command which runs is C<file -bsL path>. Note in\nparticular that the filename is not prepended to the output\n(the C<-b> option).");
else
if (strcasecmp (cmd, "command") == 0)
- pod2text ("command - run a command from the guest filesystem", " command <arguments>\n\nThis call runs a command from the guest filesystem. The\nfilesystem must be mounted, and must contain a compatible\noperating system (ie. something Linux, with the same\nor compatible processor architecture).\n\nThe single parameter is an argv-style list of arguments.\nThe first element is the name of the program to run.\nSubsequent elements are parameters. The list must be\nnon-empty (ie. must contain a program name).\n\nThe C<$PATH> environment variable will contain at least\nC</usr/bin> and C</bin>. If you require a program from\nanother location, you should provide the full path in the\nfirst parameter.\n\nShared libraries and data files required by the program\nmust be available on filesystems which are mounted in the\ncorrect places. It is the caller's responsibility to ensure\nall filesystems that are needed are mounted at the right\nlocations.");
+ pod2text ("command - run a command from the guest filesystem", " command <arguments>\n\nThis call runs a command from the guest filesystem. The\nfilesystem must be mounted, and must contain a compatible\noperating system (ie. something Linux, with the same\nor compatible processor architecture).\n\nThe single parameter is an argv-style list of arguments.\nThe first element is the name of the program to run.\nSubsequent elements are parameters. The list must be\nnon-empty (ie. must contain a program name). Note that\nthe command runs directly, and is I<not> invoked via\nthe shell (see C<sh>).\n\nThe return value is anything printed to I<stdout> by\nthe command.\n\nIf the command returns a non-zero exit status, then\nthis function returns an error message. The error message\nstring is the content of I<stderr> from the command.\n\nThe C<$PATH> environment variable will contain at least\nC</usr/bin> and C</bin>. If you require a program from\nanother location, you should provide the full path in the\nfirst parameter.\n\nShared libraries and data files required by the program\nmust be available on filesystems which are mounted in the\ncorrect places. It is the caller's responsibility to ensure\nall filesystems that are needed are mounted at the right\nlocations.\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
else
if (strcasecmp (cmd, "command_lines") == 0 || strcasecmp (cmd, "command-lines") == 0)
- pod2text ("command-lines - run a command, returning lines", " command-lines <arguments>\n\nThis is the same as C<command>, but splits the\nresult into a list of lines.");
+ pod2text ("command-lines - run a command, returning lines", " command-lines <arguments>\n\nThis is the same as C<command>, but splits the\nresult into a list of lines.\n\nSee also: C<sh_lines>\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
else
if (strcasecmp (cmd, "stat") == 0)
pod2text ("stat - get file information", " stat <path>\n\nReturns file information for the given C<path>.\n\nThis is the same as the C<stat(2)> system call.");
if (strcasecmp (cmd, "pvremove") == 0)
pod2text ("pvremove - remove an LVM physical volume", " pvremove <device>\n\nThis wipes a physical volume C<device> so that LVM will no longer\nrecognise it.\n\nThe implementation uses the C<pvremove> command which refuses to\nwipe physical volumes that contain any volume groups, so you have\nto remove those first.");
else
+ if (strcasecmp (cmd, "set_e2label") == 0 || strcasecmp (cmd, "set-e2label") == 0)
+ pod2text ("set-e2label - set the ext2/3/4 filesystem label", " set-e2label <device> <label>\n\nThis sets the ext2/3/4 filesystem label of the filesystem on\nC<device> to C<label>. Filesystem labels are limited to\n16 characters.\n\nYou can use either C<tune2fs_l> or C<get_e2label>\nto return the existing label on a filesystem.");
+ else
+ if (strcasecmp (cmd, "get_e2label") == 0 || strcasecmp (cmd, "get-e2label") == 0)
+ pod2text ("get-e2label - get the ext2/3/4 filesystem label", " get-e2label <device>\n\nThis returns the ext2/3/4 filesystem label of the filesystem on\nC<device>.");
+ else
+ if (strcasecmp (cmd, "set_e2uuid") == 0 || strcasecmp (cmd, "set-e2uuid") == 0)
+ pod2text ("set-e2uuid - set the ext2/3/4 filesystem UUID", " set-e2uuid <device> <uuid>\n\nThis sets the ext2/3/4 filesystem UUID of the filesystem on\nC<device> to C<uuid>. The format of the UUID and alternatives\nsuch as C<clear>, C<random> and C<time> are described in the\nL<tune2fs(8)> manpage.\n\nYou can use either C<tune2fs_l> or C<get_e2uuid>\nto return the existing UUID of a filesystem.");
+ else
+ if (strcasecmp (cmd, "get_e2uuid") == 0 || strcasecmp (cmd, "get-e2uuid") == 0)
+ pod2text ("get-e2uuid - get the ext2/3/4 filesystem UUID", " get-e2uuid <device>\n\nThis returns the ext2/3/4 filesystem UUID of the filesystem on\nC<device>.");
+ else
+ if (strcasecmp (cmd, "fsck") == 0)
+ pod2text ("fsck - run the filesystem checker", " fsck <fstype> <device>\n\nThis runs the filesystem checker (fsck) on C<device> which\nshould have filesystem type C<fstype>.\n\nThe returned integer is the status. See L<fsck(8)> for the\nlist of status codes from C<fsck>.\n\nNotes:\n\n=over 4\n\n=item *\n\nMultiple status codes can be summed together.\n\n=item *\n\nA non-zero return code can mean \"success\", for example if\nerrors have been corrected on the filesystem.\n\n=item *\n\nChecking or repairing NTFS volumes is not supported\n(by linux-ntfs).\n\n=back\n\nThis command is entirely equivalent to running C<fsck -a -t fstype device>.");
+ else
+ if (strcasecmp (cmd, "zero") == 0)
+ pod2text ("zero - write zeroes to the device", " zero <device>\n\nThis command writes zeroes over the first few blocks of C<device>.\n\nHow many blocks are zeroed isn't specified (but it's I<not> enough\nto securely wipe the device). It should be sufficient to remove\nany partition tables, filesystem superblocks and so on.");
+ else
+ if (strcasecmp (cmd, "grub_install") == 0 || strcasecmp (cmd, "grub-install") == 0)
+ pod2text ("grub-install - install GRUB", " grub-install <root> <device>\n\nThis command installs GRUB (the Grand Unified Bootloader) on\nC<device>, with the root directory being C<root>.");
+ else
+ if (strcasecmp (cmd, "cp") == 0)
+ pod2text ("cp - copy a file", " cp <src> <dest>\n\nThis copies a file from C<src> to C<dest> where C<dest> is\neither a destination filename or destination directory.");
+ else
+ if (strcasecmp (cmd, "cp_a") == 0 || strcasecmp (cmd, "cp-a") == 0)
+ pod2text ("cp-a - copy a file or directory recursively", " cp-a <src> <dest>\n\nThis copies a file or directory from C<src> to C<dest>\nrecursively using the C<cp -a> command.");
+ else
+ if (strcasecmp (cmd, "mv") == 0)
+ pod2text ("mv - move a file", " mv <src> <dest>\n\nThis moves a file from C<src> to C<dest> where C<dest> is\neither a destination filename or destination directory.");
+ else
+ if (strcasecmp (cmd, "drop_caches") == 0 || strcasecmp (cmd, "drop-caches") == 0)
+ pod2text ("drop-caches - drop kernel page cache, dentries and inodes", " drop-caches <whattodrop>\n\nThis instructs the guest kernel to drop its page cache,\nand/or dentries and inode caches. The parameter C<whattodrop>\ntells the kernel what precisely to drop, see\nL<http://linux-mm.org/Drop_Caches>\n\nSetting C<whattodrop> to 3 should drop everything.\n\nThis automatically calls L<sync(2)> before the operation,\nso that the maximum guest memory is freed.");
+ else
+ if (strcasecmp (cmd, "dmesg") == 0)
+ pod2text ("dmesg - return kernel messages", " dmesg\n\nThis returns the kernel messages (C<dmesg> output) from\nthe guest kernel. This is sometimes useful for extended\ndebugging of problems.\n\nAnother way to get the same information is to enable\nverbose messages with C<set_verbose> or by setting\nthe environment variable C<LIBGUESTFS_DEBUG=1> before\nrunning the program.");
+ else
+ if (strcasecmp (cmd, "ping_daemon") == 0 || strcasecmp (cmd, "ping-daemon") == 0)
+ pod2text ("ping-daemon - ping the guest daemon", " ping-daemon\n\nThis is a test probe into the guestfs daemon running inside\nthe qemu subprocess. Calling this function checks that the\ndaemon responds to the ping message, without affecting the daemon\nor attached block device(s) in any other way.");
+ else
+ if (strcasecmp (cmd, "equal") == 0)
+ pod2text ("equal - test if two files have equal contents", " equal <file1> <file2>\n\nThis compares the two files C<file1> and C<file2> and returns\ntrue if their content is exactly equal, or false otherwise.\n\nThe external L<cmp(1)> program is used for the comparison.");
+ else
+ if (strcasecmp (cmd, "strings") == 0)
+ pod2text ("strings - print the printable strings in a file", " strings <path>\n\nThis runs the L<strings(1)> command on a file and returns\nthe list of printable strings found.\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
+ else
+ if (strcasecmp (cmd, "strings_e") == 0 || strcasecmp (cmd, "strings-e") == 0)
+ pod2text ("strings-e - print the printable strings in a file", " strings-e <encoding> <path>\n\nThis is like the C<strings> command, but allows you to\nspecify the encoding.\n\nSee the L<strings(1)> manpage for the full list of encodings.\n\nCommonly useful encodings are C<l> (lower case L) which will\nshow strings inside Windows/x86 files.\n\nThe returned strings are transcoded to UTF-8.\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
+ else
+ if (strcasecmp (cmd, "hexdump") == 0)
+ pod2text ("hexdump - dump a file in hexadecimal", " hexdump <path>\n\nThis runs C<hexdump -C> on the given C<path>. The result is\nthe human-readable, canonical hex dump of the file.\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
+ else
+ if (strcasecmp (cmd, "zerofree") == 0)
+ pod2text ("zerofree - zero unused inodes and disk blocks on ext2/3 filesystem", " zerofree <device>\n\nThis runs the I<zerofree> program on C<device>. This program\nclaims to zero unused inodes and disk blocks on an ext2/3\nfilesystem, thus making it possible to compress the filesystem\nmore effectively.\n\nYou should B<not> run this program if the filesystem is\nmounted.\n\nIt is possible that using this program can damage the filesystem\nor data on the filesystem.");
+ else
+ if (strcasecmp (cmd, "pvresize") == 0)
+ pod2text ("pvresize - resize an LVM physical volume", " pvresize <device>\n\nThis resizes (expands or shrinks) an existing LVM physical\nvolume to match the new size of the underlying device.");
+ else
+ if (strcasecmp (cmd, "sfdisk_N") == 0 || strcasecmp (cmd, "sfdisk-N") == 0)
+ pod2text ("sfdisk-N - modify a single partition on a block device", " sfdisk-N <device> <n> <cyls> <heads> <sectors> <line>\n\nThis runs L<sfdisk(8)> option to modify just the single\npartition C<n> (note: C<n> counts from 1).\n\nFor other parameters, see C<sfdisk>. You should usually\npass C<0> for the cyls/heads/sectors parameters.\n\nB<This command is dangerous. Without careful use you\ncan easily destroy all your data>.");
+ else
+ if (strcasecmp (cmd, "sfdisk_l") == 0 || strcasecmp (cmd, "sfdisk-l") == 0)
+ pod2text ("sfdisk-l - display the partition table", " sfdisk-l <device>\n\nThis displays the partition table on C<device>, in the\nhuman-readable output of the L<sfdisk(8)> command. It is\nnot intended to be parsed.");
+ else
+ if (strcasecmp (cmd, "sfdisk_kernel_geometry") == 0 || strcasecmp (cmd, "sfdisk-kernel-geometry") == 0)
+ pod2text ("sfdisk-kernel-geometry - display the kernel geometry", " sfdisk-kernel-geometry <device>\n\nThis displays the kernel's idea of the geometry of C<device>.\n\nThe result is in human-readable format, and not designed to\nbe parsed.");
+ else
+ if (strcasecmp (cmd, "sfdisk_disk_geometry") == 0 || strcasecmp (cmd, "sfdisk-disk-geometry") == 0)
+ pod2text ("sfdisk-disk-geometry - display the disk geometry from the partition table", " sfdisk-disk-geometry <device>\n\nThis displays the disk geometry of C<device> read from the\npartition table. Especially in the case where the underlying\nblock device has been resized, this can be different from the\nkernel's idea of the geometry (see C<sfdisk_kernel_geometry>).\n\nThe result is in human-readable format, and not designed to\nbe parsed.");
+ else
+ if (strcasecmp (cmd, "vg_activate_all") == 0 || strcasecmp (cmd, "vg-activate-all") == 0)
+ pod2text ("vg-activate-all - activate or deactivate all volume groups", " vg-activate-all <activate>\n\nThis command activates or (if C<activate> is false) deactivates\nall logical volumes in all volume groups.\nIf activated, then they are made known to the\nkernel, ie. they appear as C</dev/mapper> devices. If deactivated,\nthen those devices disappear.\n\nThis command is the same as running C<vgchange -a y|n>");
+ else
+ if (strcasecmp (cmd, "vg_activate") == 0 || strcasecmp (cmd, "vg-activate") == 0)
+ pod2text ("vg-activate - activate or deactivate some volume groups", " vg-activate <activate> <volgroups>\n\nThis command activates or (if C<activate> is false) deactivates\nall logical volumes in the listed volume groups C<volgroups>.\nIf activated, then they are made known to the\nkernel, ie. they appear as C</dev/mapper> devices. If deactivated,\nthen those devices disappear.\n\nThis command is the same as running C<vgchange -a y|n volgroups...>\n\nNote that if C<volgroups> is an empty list then B<all> volume groups\nare activated or deactivated.");
+ else
+ if (strcasecmp (cmd, "lvresize") == 0)
+ pod2text ("lvresize - resize an LVM logical volume", " lvresize <device> <mbytes>\n\nThis resizes (expands or shrinks) an existing LVM logical\nvolume to C<mbytes>. When reducing, data in the reduced part\nis lost.");
+ else
+ if (strcasecmp (cmd, "resize2fs") == 0)
+ pod2text ("resize2fs - resize an ext2/ext3 filesystem", " resize2fs <device>\n\nThis resizes an ext2 or ext3 filesystem to match the size of\nthe underlying device.\n\nI<Note:> It is sometimes required that you run C<e2fsck_f>\non the C<device> before calling this command. For unknown reasons\nC<resize2fs> sometimes gives an error about this and sometimes not.\nIn any case, it is always safe to call C<e2fsck_f> before\ncalling this function.");
+ else
+ if (strcasecmp (cmd, "find") == 0)
+ pod2text ("find - find all files and directories", " find <directory>\n\nThis command lists out all files and directories, recursively,\nstarting at C<directory>. It is essentially equivalent to\nrunning the shell command C<find directory -print> but some\npost-processing happens on the output, described below.\n\nThis returns a list of strings I<without any prefix>. Thus\nif the directory structure was:\n\n /tmp/a\n /tmp/b\n /tmp/c/d\n\nthen the returned list from C<find> C</tmp> would be\n4 elements:\n\n a\n b\n c\n c/d\n\nIf C<directory> is not a directory, then this command returns\nan error.\n\nThe returned list is sorted.");
+ else
+ if (strcasecmp (cmd, "e2fsck_f") == 0 || strcasecmp (cmd, "e2fsck-f") == 0)
+ pod2text ("e2fsck-f - check an ext2/ext3 filesystem", " e2fsck-f <device>\n\nThis runs C<e2fsck -p -f device>, ie. runs the ext2/ext3\nfilesystem checker on C<device>, noninteractively (C<-p>),\neven if the filesystem appears to be clean (C<-f>).\n\nThis command is only needed because of C<resize2fs>\n(q.v.). Normally you should use C<fsck>.");
+ else
+ if (strcasecmp (cmd, "sleep") == 0)
+ pod2text ("sleep - sleep for some seconds", " sleep <secs>\n\nSleep for C<secs> seconds.");
+ else
+ if (strcasecmp (cmd, "ntfs_3g_probe") == 0 || strcasecmp (cmd, "ntfs-3g-probe") == 0)
+ pod2text ("ntfs-3g-probe - probe NTFS volume", " ntfs-3g-probe <rw> <device>\n\nThis command runs the L<ntfs-3g.probe(8)> command which probes\nan NTFS C<device> for mountability. (Not all NTFS volumes can\nbe mounted read-write, and some cannot be mounted at all).\n\nC<rw> is a boolean flag. Set it to true if you want to test\nif the volume can be mounted read-write. Set it to false if\nyou want to test if the volume can be mounted read-only.\n\nThe return value is an integer which C<0> if the operation\nwould succeed, or some non-zero value documented in the\nL<ntfs-3g.probe(8)> manual page.");
+ else
+ if (strcasecmp (cmd, "sh") == 0)
+ pod2text ("sh - run a command via the shell", " sh <command>\n\nThis call runs a command from the guest filesystem via the\nguest's C</bin/sh>.\n\nThis is like C<command>, but passes the command to:\n\n /bin/sh -c \"command\"\n\nDepending on the guest's shell, this usually results in\nwildcards being expanded, shell expressions being interpolated\nand so on.\n\nAll the provisos about C<command> apply to this call.");
+ else
+ if (strcasecmp (cmd, "sh_lines") == 0 || strcasecmp (cmd, "sh-lines") == 0)
+ pod2text ("sh-lines - run a command via the shell returning lines", " sh-lines <command>\n\nThis is the same as C<sh>, but splits the result\ninto a list of lines.\n\nSee also: C<command_lines>");
+ else
+ if (strcasecmp (cmd, "glob_expand") == 0 || strcasecmp (cmd, "glob-expand") == 0)
+ pod2text ("glob-expand - expand a wildcard path", " glob-expand <pattern>\n\nThis command searches for all the pathnames matching\nC<pattern> according to the wildcard expansion rules\nused by the shell.\n\nIf no paths match, then this returns an empty list\n(note: not an error).\n\nIt is just a wrapper around the C L<glob(3)> function\nwith flags C<GLOB_MARK|GLOB_BRACE>.\nSee that manual page for more details.");
+ else
display_builtin_command (cmd);
}
return r;
}
+static int run_add_drive_ro (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *filename;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ filename = argv[0];
+ r = guestfs_add_drive_ro (g, filename);
+ return r;
+}
+
static int run_config (const char *cmd, int argc, char *argv[])
{
int r;
return 0;
}
+static int run_set_append (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *append;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ append = argv[0];
+ r = guestfs_set_append (g, append);
+ return r;
+}
+
+static int run_get_append (const char *cmd, int argc, char *argv[])
+{
+ const char *r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_get_append (g);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ return 0;
+}
+
static int run_set_autosync (const char *cmd, int argc, char *argv[])
{
int r;
return r;
}
-int run_action (const char *cmd, int argc, char *argv[])
+static int run_set_e2label (const char *cmd, int argc, char *argv[])
{
- if (strcasecmp (cmd, "launch") == 0 || strcasecmp (cmd, "run") == 0)
- return run_launch (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "kill_subprocess") == 0 || strcasecmp (cmd, "kill-subprocess") == 0)
- return run_kill_subprocess (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "add_drive") == 0 || strcasecmp (cmd, "add-drive") == 0 || strcasecmp (cmd, "add") == 0)
- return run_add_drive (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "add_cdrom") == 0 || strcasecmp (cmd, "add-cdrom") == 0 || strcasecmp (cmd, "cdrom") == 0)
- return run_add_cdrom (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "config") == 0)
- return run_config (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "set_qemu") == 0 || strcasecmp (cmd, "set-qemu") == 0 || strcasecmp (cmd, "qemu") == 0)
- return run_set_qemu (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "get_qemu") == 0 || strcasecmp (cmd, "get-qemu") == 0)
- return run_get_qemu (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "set_path") == 0 || strcasecmp (cmd, "set-path") == 0 || strcasecmp (cmd, "path") == 0)
- return run_set_path (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "get_path") == 0 || strcasecmp (cmd, "get-path") == 0)
- return run_get_path (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "set_autosync") == 0 || strcasecmp (cmd, "set-autosync") == 0 || strcasecmp (cmd, "autosync") == 0)
- return run_set_autosync (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "get_autosync") == 0 || strcasecmp (cmd, "get-autosync") == 0)
- return run_get_autosync (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "set_verbose") == 0 || strcasecmp (cmd, "set-verbose") == 0 || strcasecmp (cmd, "verbose") == 0)
- return run_set_verbose (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "get_verbose") == 0 || strcasecmp (cmd, "get-verbose") == 0)
- return run_get_verbose (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "is_ready") == 0 || strcasecmp (cmd, "is-ready") == 0)
- return run_is_ready (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "is_config") == 0 || strcasecmp (cmd, "is-config") == 0)
- return run_is_config (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "is_launching") == 0 || strcasecmp (cmd, "is-launching") == 0)
- return run_is_launching (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "is_busy") == 0 || strcasecmp (cmd, "is-busy") == 0)
- return run_is_busy (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "get_state") == 0 || strcasecmp (cmd, "get-state") == 0)
- return run_get_state (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "mount") == 0)
- return run_mount (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "sync") == 0)
- return run_sync (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "touch") == 0)
- return run_touch (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "cat") == 0)
- return run_cat (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "ll") == 0)
- return run_ll (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "ls") == 0)
- return run_ls (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "list_devices") == 0 || strcasecmp (cmd, "list-devices") == 0)
- return run_list_devices (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "list_partitions") == 0 || strcasecmp (cmd, "list-partitions") == 0)
- return run_list_partitions (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "pvs") == 0)
- return run_pvs (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "vgs") == 0)
- return run_vgs (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "lvs") == 0)
- return run_lvs (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "pvs_full") == 0 || strcasecmp (cmd, "pvs-full") == 0)
- return run_pvs_full (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "vgs_full") == 0 || strcasecmp (cmd, "vgs-full") == 0)
- return run_vgs_full (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "lvs_full") == 0 || strcasecmp (cmd, "lvs-full") == 0)
- return run_lvs_full (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "read_lines") == 0 || strcasecmp (cmd, "read-lines") == 0)
- return run_read_lines (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_init") == 0 || strcasecmp (cmd, "aug-init") == 0)
- return run_aug_init (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_close") == 0 || strcasecmp (cmd, "aug-close") == 0)
- return run_aug_close (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_defvar") == 0 || strcasecmp (cmd, "aug-defvar") == 0)
- return run_aug_defvar (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_defnode") == 0 || strcasecmp (cmd, "aug-defnode") == 0)
- return run_aug_defnode (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_get") == 0 || strcasecmp (cmd, "aug-get") == 0)
- return run_aug_get (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_set") == 0 || strcasecmp (cmd, "aug-set") == 0)
- return run_aug_set (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_insert") == 0 || strcasecmp (cmd, "aug-insert") == 0)
- return run_aug_insert (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_rm") == 0 || strcasecmp (cmd, "aug-rm") == 0)
- return run_aug_rm (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_mv") == 0 || strcasecmp (cmd, "aug-mv") == 0)
- return run_aug_mv (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_match") == 0 || strcasecmp (cmd, "aug-match") == 0)
- return run_aug_match (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_save") == 0 || strcasecmp (cmd, "aug-save") == 0)
- return run_aug_save (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_load") == 0 || strcasecmp (cmd, "aug-load") == 0)
- return run_aug_load (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_ls") == 0 || strcasecmp (cmd, "aug-ls") == 0)
- return run_aug_ls (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "rm") == 0)
- return run_rm (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "rmdir") == 0)
- return run_rmdir (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "rm_rf") == 0 || strcasecmp (cmd, "rm-rf") == 0)
- return run_rm_rf (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "mkdir") == 0)
- return run_mkdir (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "mkdir_p") == 0 || strcasecmp (cmd, "mkdir-p") == 0)
- return run_mkdir_p (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "chmod") == 0)
- return run_chmod (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "chown") == 0)
- return run_chown (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "exists") == 0)
- return run_exists (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "is_file") == 0 || strcasecmp (cmd, "is-file") == 0)
- return run_is_file (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "is_dir") == 0 || strcasecmp (cmd, "is-dir") == 0)
- return run_is_dir (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "pvcreate") == 0)
- return run_pvcreate (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "vgcreate") == 0)
- return run_vgcreate (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "lvcreate") == 0)
- return run_lvcreate (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "mkfs") == 0)
- return run_mkfs (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "sfdisk") == 0)
- return run_sfdisk (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "write_file") == 0 || strcasecmp (cmd, "write-file") == 0)
+ int r;
+ const char *device;
+ const char *label;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ label = argv[1];
+ r = guestfs_set_e2label (g, device, label);
+ return r;
+}
+
+static int run_get_e2label (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_get_e2label (g, device);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_set_e2uuid (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ const char *uuid;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ uuid = argv[1];
+ r = guestfs_set_e2uuid (g, device, uuid);
+ return r;
+}
+
+static int run_get_e2uuid (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_get_e2uuid (g, device);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_fsck (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *fstype;
+ const char *device;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ fstype = argv[0];
+ device = argv[1];
+ r = guestfs_fsck (g, fstype, device);
+ if (r == -1) return -1;
+ printf ("%d\n", r);
+ return 0;
+}
+
+static int run_zero (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_zero (g, device);
+ return r;
+}
+
+static int run_grub_install (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *root;
+ const char *device;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ root = argv[0];
+ device = argv[1];
+ r = guestfs_grub_install (g, root, device);
+ return r;
+}
+
+static int run_cp (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *src;
+ const char *dest;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ src = argv[0];
+ dest = argv[1];
+ r = guestfs_cp (g, src, dest);
+ return r;
+}
+
+static int run_cp_a (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *src;
+ const char *dest;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ src = argv[0];
+ dest = argv[1];
+ r = guestfs_cp_a (g, src, dest);
+ return r;
+}
+
+static int run_mv (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *src;
+ const char *dest;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ src = argv[0];
+ dest = argv[1];
+ r = guestfs_mv (g, src, dest);
+ return r;
+}
+
+static int run_drop_caches (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ int whattodrop;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ whattodrop = atoi (argv[0]);
+ r = guestfs_drop_caches (g, whattodrop);
+ return r;
+}
+
+static int run_dmesg (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_dmesg (g);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_ping_daemon (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_ping_daemon (g);
+ return r;
+}
+
+static int run_equal (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *file1;
+ const char *file2;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ file1 = argv[0];
+ file2 = argv[1];
+ r = guestfs_equal (g, file1, file2);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_strings (const char *cmd, int argc, char *argv[])
+{
+ char **r;
+ const char *path;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ path = argv[0];
+ r = guestfs_strings (g, path);
+ if (r == NULL) return -1;
+ print_strings (r);
+ free_strings (r);
+ return 0;
+}
+
+static int run_strings_e (const char *cmd, int argc, char *argv[])
+{
+ char **r;
+ const char *encoding;
+ const char *path;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ encoding = argv[0];
+ path = argv[1];
+ r = guestfs_strings_e (g, encoding, path);
+ if (r == NULL) return -1;
+ print_strings (r);
+ free_strings (r);
+ return 0;
+}
+
+static int run_hexdump (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *path;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ path = argv[0];
+ r = guestfs_hexdump (g, path);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_zerofree (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_zerofree (g, device);
+ return r;
+}
+
+static int run_pvresize (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_pvresize (g, device);
+ return r;
+}
+
+static int run_sfdisk_N (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ int n;
+ int cyls;
+ int heads;
+ int sectors;
+ const char *line;
+ if (argc != 6) {
+ fprintf (stderr, "%s should have 6 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ n = atoi (argv[1]);
+ cyls = atoi (argv[2]);
+ heads = atoi (argv[3]);
+ sectors = atoi (argv[4]);
+ line = argv[5];
+ r = guestfs_sfdisk_N (g, device, n, cyls, heads, sectors, line);
+ return r;
+}
+
+static int run_sfdisk_l (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_sfdisk_l (g, device);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_sfdisk_kernel_geometry (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_sfdisk_kernel_geometry (g, device);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_sfdisk_disk_geometry (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_sfdisk_disk_geometry (g, device);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_vg_activate_all (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ int activate;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ activate = is_true (argv[0]) ? 1 : 0;
+ r = guestfs_vg_activate_all (g, activate);
+ return r;
+}
+
+static int run_vg_activate (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ int activate;
+ char **volgroups;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ activate = is_true (argv[0]) ? 1 : 0;
+ volgroups = parse_string_list (argv[1]);
+ r = guestfs_vg_activate (g, activate, volgroups);
+ return r;
+}
+
+static int run_lvresize (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ int mbytes;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ mbytes = atoi (argv[1]);
+ r = guestfs_lvresize (g, device, mbytes);
+ return r;
+}
+
+static int run_resize2fs (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_resize2fs (g, device);
+ return r;
+}
+
+static int run_find (const char *cmd, int argc, char *argv[])
+{
+ char **r;
+ const char *directory;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ directory = argv[0];
+ r = guestfs_find (g, directory);
+ if (r == NULL) return -1;
+ print_strings (r);
+ free_strings (r);
+ return 0;
+}
+
+static int run_e2fsck_f (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_e2fsck_f (g, device);
+ return r;
+}
+
+static int run_sleep (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ int secs;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ secs = atoi (argv[0]);
+ r = guestfs_sleep (g, secs);
+ return r;
+}
+
+static int run_ntfs_3g_probe (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ int rw;
+ const char *device;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ rw = is_true (argv[0]) ? 1 : 0;
+ device = argv[1];
+ r = guestfs_ntfs_3g_probe (g, rw, device);
+ if (r == -1) return -1;
+ printf ("%d\n", r);
+ return 0;
+}
+
+static int run_sh (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *command;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ command = argv[0];
+ r = guestfs_sh (g, command);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_sh_lines (const char *cmd, int argc, char *argv[])
+{
+ char **r;
+ const char *command;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ command = argv[0];
+ r = guestfs_sh_lines (g, command);
+ if (r == NULL) return -1;
+ print_strings (r);
+ free_strings (r);
+ return 0;
+}
+
+static int run_glob_expand (const char *cmd, int argc, char *argv[])
+{
+ char **r;
+ const char *pattern;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ pattern = argv[0];
+ r = guestfs_glob_expand (g, pattern);
+ if (r == NULL) return -1;
+ print_strings (r);
+ free_strings (r);
+ return 0;
+}
+
+int run_action (const char *cmd, int argc, char *argv[])
+{
+ if (strcasecmp (cmd, "launch") == 0 || strcasecmp (cmd, "run") == 0)
+ return run_launch (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "kill_subprocess") == 0 || strcasecmp (cmd, "kill-subprocess") == 0)
+ return run_kill_subprocess (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "add_drive") == 0 || strcasecmp (cmd, "add-drive") == 0 || strcasecmp (cmd, "add") == 0)
+ return run_add_drive (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "add_cdrom") == 0 || strcasecmp (cmd, "add-cdrom") == 0 || strcasecmp (cmd, "cdrom") == 0)
+ return run_add_cdrom (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "add_drive_ro") == 0 || strcasecmp (cmd, "add-drive-ro") == 0 || strcasecmp (cmd, "add-ro") == 0)
+ return run_add_drive_ro (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "config") == 0)
+ return run_config (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "set_qemu") == 0 || strcasecmp (cmd, "set-qemu") == 0 || strcasecmp (cmd, "qemu") == 0)
+ return run_set_qemu (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_qemu") == 0 || strcasecmp (cmd, "get-qemu") == 0)
+ return run_get_qemu (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "set_path") == 0 || strcasecmp (cmd, "set-path") == 0 || strcasecmp (cmd, "path") == 0)
+ return run_set_path (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_path") == 0 || strcasecmp (cmd, "get-path") == 0)
+ return run_get_path (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "set_append") == 0 || strcasecmp (cmd, "set-append") == 0 || strcasecmp (cmd, "append") == 0)
+ return run_set_append (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_append") == 0 || strcasecmp (cmd, "get-append") == 0)
+ return run_get_append (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "set_autosync") == 0 || strcasecmp (cmd, "set-autosync") == 0 || strcasecmp (cmd, "autosync") == 0)
+ return run_set_autosync (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_autosync") == 0 || strcasecmp (cmd, "get-autosync") == 0)
+ return run_get_autosync (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "set_verbose") == 0 || strcasecmp (cmd, "set-verbose") == 0 || strcasecmp (cmd, "verbose") == 0)
+ return run_set_verbose (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_verbose") == 0 || strcasecmp (cmd, "get-verbose") == 0)
+ return run_get_verbose (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_ready") == 0 || strcasecmp (cmd, "is-ready") == 0)
+ return run_is_ready (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_config") == 0 || strcasecmp (cmd, "is-config") == 0)
+ return run_is_config (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_launching") == 0 || strcasecmp (cmd, "is-launching") == 0)
+ return run_is_launching (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_busy") == 0 || strcasecmp (cmd, "is-busy") == 0)
+ return run_is_busy (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_state") == 0 || strcasecmp (cmd, "get-state") == 0)
+ return run_get_state (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mount") == 0)
+ return run_mount (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "sync") == 0)
+ return run_sync (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "touch") == 0)
+ return run_touch (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "cat") == 0)
+ return run_cat (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "ll") == 0)
+ return run_ll (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "ls") == 0)
+ return run_ls (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "list_devices") == 0 || strcasecmp (cmd, "list-devices") == 0)
+ return run_list_devices (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "list_partitions") == 0 || strcasecmp (cmd, "list-partitions") == 0)
+ return run_list_partitions (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "pvs") == 0)
+ return run_pvs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "vgs") == 0)
+ return run_vgs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "lvs") == 0)
+ return run_lvs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "pvs_full") == 0 || strcasecmp (cmd, "pvs-full") == 0)
+ return run_pvs_full (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "vgs_full") == 0 || strcasecmp (cmd, "vgs-full") == 0)
+ return run_vgs_full (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "lvs_full") == 0 || strcasecmp (cmd, "lvs-full") == 0)
+ return run_lvs_full (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "read_lines") == 0 || strcasecmp (cmd, "read-lines") == 0)
+ return run_read_lines (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_init") == 0 || strcasecmp (cmd, "aug-init") == 0)
+ return run_aug_init (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_close") == 0 || strcasecmp (cmd, "aug-close") == 0)
+ return run_aug_close (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_defvar") == 0 || strcasecmp (cmd, "aug-defvar") == 0)
+ return run_aug_defvar (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_defnode") == 0 || strcasecmp (cmd, "aug-defnode") == 0)
+ return run_aug_defnode (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_get") == 0 || strcasecmp (cmd, "aug-get") == 0)
+ return run_aug_get (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_set") == 0 || strcasecmp (cmd, "aug-set") == 0)
+ return run_aug_set (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_insert") == 0 || strcasecmp (cmd, "aug-insert") == 0)
+ return run_aug_insert (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_rm") == 0 || strcasecmp (cmd, "aug-rm") == 0)
+ return run_aug_rm (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_mv") == 0 || strcasecmp (cmd, "aug-mv") == 0)
+ return run_aug_mv (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_match") == 0 || strcasecmp (cmd, "aug-match") == 0)
+ return run_aug_match (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_save") == 0 || strcasecmp (cmd, "aug-save") == 0)
+ return run_aug_save (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_load") == 0 || strcasecmp (cmd, "aug-load") == 0)
+ return run_aug_load (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_ls") == 0 || strcasecmp (cmd, "aug-ls") == 0)
+ return run_aug_ls (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "rm") == 0)
+ return run_rm (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "rmdir") == 0)
+ return run_rmdir (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "rm_rf") == 0 || strcasecmp (cmd, "rm-rf") == 0)
+ return run_rm_rf (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mkdir") == 0)
+ return run_mkdir (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mkdir_p") == 0 || strcasecmp (cmd, "mkdir-p") == 0)
+ return run_mkdir_p (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "chmod") == 0)
+ return run_chmod (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "chown") == 0)
+ return run_chown (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "exists") == 0)
+ return run_exists (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_file") == 0 || strcasecmp (cmd, "is-file") == 0)
+ return run_is_file (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_dir") == 0 || strcasecmp (cmd, "is-dir") == 0)
+ return run_is_dir (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "pvcreate") == 0)
+ return run_pvcreate (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "vgcreate") == 0)
+ return run_vgcreate (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "lvcreate") == 0)
+ return run_lvcreate (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mkfs") == 0)
+ return run_mkfs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "sfdisk") == 0)
+ return run_sfdisk (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "write_file") == 0 || strcasecmp (cmd, "write-file") == 0)
return run_write_file (cmd, argc, argv);
else
if (strcasecmp (cmd, "umount") == 0 || strcasecmp (cmd, "unmount") == 0)
if (strcasecmp (cmd, "pvremove") == 0)
return run_pvremove (cmd, argc, argv);
else
+ if (strcasecmp (cmd, "set_e2label") == 0 || strcasecmp (cmd, "set-e2label") == 0)
+ return run_set_e2label (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_e2label") == 0 || strcasecmp (cmd, "get-e2label") == 0)
+ return run_get_e2label (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "set_e2uuid") == 0 || strcasecmp (cmd, "set-e2uuid") == 0)
+ return run_set_e2uuid (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_e2uuid") == 0 || strcasecmp (cmd, "get-e2uuid") == 0)
+ return run_get_e2uuid (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "fsck") == 0)
+ return run_fsck (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "zero") == 0)
+ return run_zero (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "grub_install") == 0 || strcasecmp (cmd, "grub-install") == 0)
+ return run_grub_install (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "cp") == 0)
+ return run_cp (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "cp_a") == 0 || strcasecmp (cmd, "cp-a") == 0)
+ return run_cp_a (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mv") == 0)
+ return run_mv (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "drop_caches") == 0 || strcasecmp (cmd, "drop-caches") == 0)
+ return run_drop_caches (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "dmesg") == 0)
+ return run_dmesg (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "ping_daemon") == 0 || strcasecmp (cmd, "ping-daemon") == 0)
+ return run_ping_daemon (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "equal") == 0)
+ return run_equal (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "strings") == 0)
+ return run_strings (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "strings_e") == 0 || strcasecmp (cmd, "strings-e") == 0)
+ return run_strings_e (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "hexdump") == 0)
+ return run_hexdump (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "zerofree") == 0)
+ return run_zerofree (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "pvresize") == 0)
+ return run_pvresize (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "sfdisk_N") == 0 || strcasecmp (cmd, "sfdisk-N") == 0)
+ return run_sfdisk_N (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "sfdisk_l") == 0 || strcasecmp (cmd, "sfdisk-l") == 0)
+ return run_sfdisk_l (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "sfdisk_kernel_geometry") == 0 || strcasecmp (cmd, "sfdisk-kernel-geometry") == 0)
+ return run_sfdisk_kernel_geometry (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "sfdisk_disk_geometry") == 0 || strcasecmp (cmd, "sfdisk-disk-geometry") == 0)
+ return run_sfdisk_disk_geometry (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "vg_activate_all") == 0 || strcasecmp (cmd, "vg-activate-all") == 0)
+ return run_vg_activate_all (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "vg_activate") == 0 || strcasecmp (cmd, "vg-activate") == 0)
+ return run_vg_activate (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "lvresize") == 0)
+ return run_lvresize (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "resize2fs") == 0)
+ return run_resize2fs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "find") == 0)
+ return run_find (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "e2fsck_f") == 0 || strcasecmp (cmd, "e2fsck-f") == 0)
+ return run_e2fsck_f (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "sleep") == 0)
+ return run_sleep (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "ntfs_3g_probe") == 0 || strcasecmp (cmd, "ntfs-3g-probe") == 0)
+ return run_ntfs_3g_probe (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "sh") == 0)
+ return run_sh (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "sh_lines") == 0 || strcasecmp (cmd, "sh-lines") == 0)
+ return run_sh_lines (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "glob_expand") == 0 || strcasecmp (cmd, "glob-expand") == 0)
+ return run_glob_expand (cmd, argc, argv);
+ else
{
fprintf (stderr, "%s: unknown command\n", cmd);
return -1;
git.annexia.org / libguestfs.git / blobdiff