msgstr ""
"Project-Id-Version: pl\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2008-03-26 10:03+0000\n"
-"PO-Revision-Date: 2008-04-12 17:07+0200\n"
+"POT-Creation-Date: 2008-03-26 14:15+0000\n"
+"PO-Revision-Date: 2008-10-24 16:56+0200\n"
"Last-Translator: Piotr Drąg <piotrdrag@gmail.com>\n"
"Language-Team: Polish <pl@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../.tmp.virt-p2v.ml:1934
+#: ../.tmp.virt-p2v.ml:1973
msgid " (about %.0f minutes remaining)"
msgstr " (pozostało około %.0f minut)"
-#: ../.tmp.virt-p2v.ml:1937
+#: ../.tmp.virt-p2v.ml:1976
msgid " (about %.0f seconds remaining)"
msgstr " (pozostało około %.0f sekund)"
-#: ../.tmp.virt-p2v.ml:1960
+#: ../.tmp.virt-p2v.ml:1999
msgid "%s has finished"
msgstr "Zakończono %s"
msgid "%s starting up ...\\n%!"
msgstr "Uruchamianie %s...\\n%!"
-#: ../.tmp.virt-p2v.ml:1482
+#: ../.tmp.virt-p2v.ml:1521
msgid "(leave MAC blank for random)"
msgstr "(pozostaw MAC puste, aby było losowe)"
-#: ../.tmp.virt-p2v.ml:1446
+#: ../.tmp.virt-p2v.ml:1485
msgid "Architecture:"
msgstr "Architektura:"
-#: ../.tmp.virt-p2v.ml:1174
+#: ../.tmp.virt-p2v.ml:1209
msgid "Automatic from:"
msgstr "Automatycznie z:"
-#: ../.tmp.virt-p2v.ml:1410
+#: ../.tmp.virt-p2v.ml:1446
msgid "Block devices"
msgstr "Urządzenia blokowe"
-#: ../.tmp.virt-p2v.ml:1476
+#: ../.tmp.virt-p2v.ml:1515
msgid "CPUs:"
msgstr "Procesory:"
msgid "Command failed:\\n\\n%s"
msgstr "Polecenie nie powiodło się:\\n\\n%s"
-#: ../.tmp.virt-p2v.ml:1144
+#: ../.tmp.virt-p2v.ml:1179
msgid "Configure network"
msgstr "Skonfiguruj sieć"
-#: ../.tmp.virt-p2v.ml:1437
+#: ../.tmp.virt-p2v.ml:1476
msgid "Configure target system"
msgstr "Skonfiguruj system docelowy"
msgstr "Wykrywanie dysków twardych (może to chwilę zająć)..."
#: ../.tmp.virt-p2v.ml:594
-msgid "Disk snapshot failed: unable to read the size in sectors of block device %s"
-msgstr "Zrzut dysku nie powiódł się: nie można odczytać rozmiaru sektorów urządzenia blokowego %s"
+msgid ""
+"Disk snapshot failed: unable to read the size in sectors of block device %s"
+msgstr ""
+"Zrzut dysku nie powiódł się: nie można odczytać rozmiaru sektorów urządzenia "
+"blokowego %s"
-#: ../.tmp.virt-p2v.ml:1190
+#: ../.tmp.virt-p2v.ml:1225
msgid "Don't configure the network"
msgstr "Nie konfiguruj sieci"
msgid "Finished detecting hard drives."
msgstr "Zakończono wykrywanie dysków twardych."
-#: ../.tmp.virt-p2v.ml:1201
+#: ../.tmp.virt-p2v.ml:1236
msgid "Gateway"
msgstr "Brama"
-#: ../.tmp.virt-p2v.ml:1439
+#: ../.tmp.virt-p2v.ml:1478
msgid "Hypervisor:"
msgstr "Nadzorca:"
-#: ../.tmp.virt-p2v.ml:1197
+#: ../.tmp.virt-p2v.ml:1232
msgid "IP"
msgstr "IP"
-#: ../.tmp.virt-p2v.ml:1195
+#: ../.tmp.virt-p2v.ml:1230
msgid "Interface"
msgstr "Interfejs"
msgid "Linux swap"
msgstr "Linuksowa przestrzeń wymiany"
-#: ../.tmp.virt-p2v.ml:1479
+#: ../.tmp.virt-p2v.ml:1518
msgid "MAC addr:"
msgstr "Adres MAC:"
-#: ../.tmp.virt-p2v.ml:1473
+#: ../.tmp.virt-p2v.ml:1512
msgid "Memory (MB):"
msgstr "Pamięć (MB):"
msgid "Mountable non-root"
msgstr "Montowalny nie-root"
-#: ../.tmp.virt-p2v.ml:1203
+#: ../.tmp.virt-p2v.ml:1238
msgid "Nameserver"
msgstr "Serwer nazwa"
-#: ../.tmp.virt-p2v.ml:1199
+#: ../.tmp.virt-p2v.ml:1234
msgid "Netmask"
msgstr "Maska sieci"
-#: ../.tmp.virt-p2v.ml:1143
+#: ../.tmp.virt-p2v.ml:1178
msgid "Network"
msgstr "Sieć"
-#: ../.tmp.virt-p2v.ml:1291
-msgid "Network configuration.\\n\\nPlease configure the network from this shell.\\n\\nWhen you have finished, exit the shell with ^D or exit.\\n"
-msgstr "Konfiguracja sieci.\\n\\nSkonfiguruj sieć z tej powłoki.\\n\\nKiedy skończysz zakończ powłokę za pomocą ^D lub exit.\\n"
+#: ../.tmp.virt-p2v.ml:1326
+msgid ""
+"Network configuration.\\n\\nPlease configure the network from this shell.\\n"
+"\\nWhen you have finished, exit the shell with ^D or exit.\\n"
+msgstr ""
+"Konfiguracja sieci.\\n\\nSkonfiguruj sieć z tej powłoki.\\n\\nKiedy "
+"skończysz zakończ powłokę za pomocą ^D lub exit.\\n"
#: ../.tmp.virt-p2v.ml:892
-msgid "No non-removable block devices (hard disks, etc.) could be found on this machine."
-msgstr "Nie znaleziono nieusuwalnych urządzeń blokowych (dysków twardych itp.) w systemie."
+msgid ""
+"No non-removable block devices (hard disks, etc.) could be found on this "
+"machine."
+msgstr ""
+"Nie znaleziono nieusuwalnych urządzeń blokowych (dysków twardych itp.) w "
+"systemie."
-#: ../.tmp.virt-p2v.ml:1615
+#: ../.tmp.virt-p2v.ml:1654
msgid "Note"
msgstr "Uwaga"
-#: ../.tmp.virt-p2v.ml:1657
+#: ../.tmp.virt-p2v.ml:1696
msgid "Performing LVM snapshots ...\\n"
msgstr "Wykonywanie zrzutów LVM...\\n"
-#: ../.tmp.virt-p2v.ml:1129
+#: ../.tmp.virt-p2v.ml:1132
msgid "Physical to Virtual (P2V)"
msgstr "Fizyczny do wirtualnego (P2V)"
-#: ../.tmp.virt-p2v.ml:1187
+#: ../.tmp.virt-p2v.ml:1222
msgid "QEMU user network"
msgstr "Sieć użytkownika QEMU"
-#: ../.tmp.virt-p2v.ml:1341
+#: ../.tmp.virt-p2v.ml:1376
msgid "Remote directory"
msgstr "Zdalny folder"
-#: ../.tmp.virt-p2v.ml:1337
+#: ../.tmp.virt-p2v.ml:1372
msgid "Remote host"
msgstr "Zdalny host"
-#: ../.tmp.virt-p2v.ml:1610
-msgid "Remote hypervisor claims not to support fully virtualized %s guests.\\n\\nContinuing anyway.\\n\\n%!"
-msgstr "Zdalny nadzorca nie obsługuje w pełni wirtualizowanych gości %s.\\n\\nKontynuowanie mimo to.\\n\\n%!"
+#: ../.tmp.virt-p2v.ml:1649
+msgid ""
+"Remote hypervisor claims not to support fully virtualized %s guests.\\n"
+"\\nContinuing anyway.\\n\\n%!"
+msgstr ""
+"Zdalny nadzorca nie obsługuje w pełni wirtualizowanych gości %s.\\n"
+"\\nKontynuowanie mimo to.\\n\\n%!"
-#: ../.tmp.virt-p2v.ml:1616
-msgid "Remote hypervisor supports multiple types of fully virtualized %s guests.\\n\\nPlease help further development of libvirt and virt-p2v by sending the file /tmp/virt-p2v.log back to the developers. See the main virt-p2v website for contact details."
-msgstr "Zdalny nadzorca obsługuje wiele typów w pełni wirtualizowanych gości %s.\\n\\nProsimy wspomóc dalszy rozwój libvirt i virt-p2v wysyłając plik /tmp/virt-p2v.log do programistów. Zobacz główną stronę WWW virt-p2v, aby znaleźć szczegóły kontaktu z nimi."
+#: ../.tmp.virt-p2v.ml:1655
+msgid ""
+"Remote hypervisor supports multiple types of fully virtualized %s guests.\\n"
+"\\nPlease help further development of libvirt and virt-p2v by sending the "
+"file /tmp/virt-p2v.log back to the developers. See the main virt-p2v "
+"website for contact details."
+msgstr ""
+"Zdalny nadzorca obsługuje wiele typów w pełni wirtualizowanych gości %s.\\n"
+"\\nProsimy wspomóc dalszy rozwój libvirt i virt-p2v wysyłając plik /tmp/virt-"
+"p2v.log do programistów. Zobacz główną stronę WWW virt-p2v, aby znaleźć "
+"szczegóły kontaktu z nimi."
-#: ../.tmp.virt-p2v.ml:1339
+#: ../.tmp.virt-p2v.ml:1374
msgid "Remote port"
msgstr "Zdalny port"
-#: ../.tmp.virt-p2v.ml:1428
+#: ../.tmp.virt-p2v.ml:1467
msgid "Root filesystem"
msgstr "System plików root"
-#: ../.tmp.virt-p2v.ml:1335 ../.tmp.virt-p2v.ml:1334
+#: ../.tmp.virt-p2v.ml:1370 ../.tmp.virt-p2v.ml:1369
msgid "SSH configuration"
msgstr "Konfiguracja SSH"
-#: ../.tmp.virt-p2v.ml:1392
+#: ../.tmp.virt-p2v.ml:1427
msgid "SSH configuration failed"
msgstr "Konfiguracja SSH nie powiodła się"
-#: ../.tmp.virt-p2v.ml:1343
+#: ../.tmp.virt-p2v.ml:1378
msgid "SSH username"
msgstr "Nzzwa użytkownika SSH"
-#: ../.tmp.virt-p2v.ml:1412
+#: ../.tmp.virt-p2v.ml:1448
msgid "Select block devices to send"
msgstr "Wybierz urządzenie blokowe do wysłania"
msgid "Select language"
msgstr "Wybierz język"
-#: ../.tmp.virt-p2v.ml:1429
+#: ../.tmp.virt-p2v.ml:1468
msgid "Select root filesystem"
msgstr "Wybierz system plików root"
-#: ../.tmp.virt-p2v.ml:1177
+#: ../.tmp.virt-p2v.ml:1143
+msgid "Split partitions"
+msgstr "Rozdziel partycje"
+
+#: ../.tmp.virt-p2v.ml:1146
+msgid ""
+"Split partitions lets you resize partitions during the transfer. This "
+"feature is experimental."
+msgstr ""
+"Rozdzielenie partycji umożliwia zmianę rozmiaru partycji podczas "
+"przesyłania. Ta funkcja jest eksperymentalna."
+
+#: ../.tmp.virt-p2v.ml:1212
msgid "Start a shell"
msgstr "Uruchom powłokę"
-#: ../.tmp.virt-p2v.ml:1193
+#: ../.tmp.virt-p2v.ml:1228
msgid "Static configuration:"
msgstr "Statyczna konfiguracja:"
-#: ../.tmp.virt-p2v.ml:1436
+#: ../.tmp.virt-p2v.ml:1475
msgid "Target system"
msgstr "System docelowy"
-#: ../.tmp.virt-p2v.ml:1356
+#: ../.tmp.virt-p2v.ml:1391
msgid "Test SSH connection"
msgstr "Przetestuj połączenie SSH"
#: ../.tmp.virt-p2v.ml:699
msgid "Testing SSH connection by listing files in remote directory ...\\n"
-msgstr "Testowanie połączenia SSH przez wyświetlanie plików w zdalnym folderze...\\n"
+msgstr ""
+"Testowanie połączenia SSH przez wyświetlanie plików w zdalnym folderze...\\n"
-#: ../.tmp.virt-p2v.ml:1135 ../.tmp.virt-p2v.ml:1134
+#: ../.tmp.virt-p2v.ml:1129 ../.tmp.virt-p2v.ml:1128
msgid "Transfer type"
msgstr "Typ transferu"
-#: ../.tmp.virt-p2v.ml:1563
+#: ../.tmp.virt-p2v.ml:1602
msgid "Try to fetch remote hypervisor capabilities ...\\n"
msgstr "Spróbuj przechwycić możliwości zdalnego nadzorcy...\\n"
-#: ../.tmp.virt-p2v.ml:1320
+#: ../.tmp.virt-p2v.ml:1355
msgid "Trying QEMU network configuration.\\n"
msgstr "Próbowanie konfiguracji sieci QEMU.\\n"
-#: ../.tmp.virt-p2v.ml:1304
+#: ../.tmp.virt-p2v.ml:1339
msgid "Trying network auto-configuration from root filesystem ...\\n"
msgstr "Próbowanie automatycznej konfiguracji sieci z systemu pików root...\\n"
-#: ../.tmp.virt-p2v.ml:1295
+#: ../.tmp.virt-p2v.ml:1330
msgid "Trying static network configuration.\\n"
msgstr "Próbowanie statycznej konfiguracji sieci.\\n"
msgid "Unknown partition type"
msgstr "Nieznany typ partycji"
-#: ../.tmp.virt-p2v.ml:1352
+#: ../.tmp.virt-p2v.ml:1387
msgid "Use SSH compression (not good for LANs)"
msgstr "Użyj kompresji SSH (nie jest dobre dla sieci LAN)"
-#: ../.tmp.virt-p2v.ml:1485
+#: ../.tmp.virt-p2v.ml:1524
msgid "Use remote libvirtd"
msgstr "Użyj zdanego libvirtd"
-#: ../.tmp.virt-p2v.ml:1130
+#: ../.tmp.virt-p2v.ml:1135
msgid "Virtual to Virtual (V2V)"
msgstr "Wirtualny do wirtualnego (V2V)"
-#: ../.tmp.virt-p2v.ml:1609
+#: ../.tmp.virt-p2v.ml:1648
msgid "Warning"
msgstr "Ostrzeżenie"
#: ../.tmp.virt-p2v.ml:1121
-msgid "Welcome to %s, a live CD for migrating a physical machine to a virtualized host.\\n\\nTo continue press the Return key.\\n\\nTo get a shell you can use [ALT] [F2] and log in as root with no password.\\n\\nExtra information is logged in /tmp/virt-p2v.log but this file disappears when the machine reboots."
-msgstr "Witaj w %s, Live CD do migrowania fizycznych komputerów do wirtualizowanych hostów.\\n\\nAby kontynuować, naciśnij klawisz Return.\\n\\nAby uzyskać powłokę możesz użyć [ALT] [F2] i zalogować się jako root bez hasła.\\n\\nDodatkowe informacje są zpaisywane w pliku /tmp/virt-p2v.log, ale ten plik zniknie po ponownym uruchomieniu komputera."
+msgid ""
+"Welcome to %s, a live CD for migrating a physical machine to a virtualized "
+"host.\\n\\nTo continue press the Return key.\\n\\nTo get a shell you can use "
+"[ALT] [F2] and log in as root with no password.\\n\\nExtra information is "
+"logged in /tmp/virt-p2v.log but this file disappears when the machine "
+"reboots."
+msgstr ""
+"Witaj w %s, Live CD do migrowania fizycznych komputerów do wirtualizowanych "
+"hostów.\\n\\nAby kontynuować, naciśnij klawisz Return.\\n\\nAby uzyskać "
+"powłokę możesz użyć [ALT] [F2] i zalogować się jako root bez hasła.\\n"
+"\\nDodatkowe informacje są zpaisywane w pliku /tmp/virt-p2v.log, ale ten "
+"plik zniknie po ponownym uruchomieniu komputera."
#: ../.tmp.virt-p2v.ml:236
msgid "Windows root"
msgid "You should only run this script from the live CD or a USB key."
msgstr "Ten skrypt powinien być wykonywany tylko z Live CD lub dysku USB."
-#: ../.tmp.virt-p2v.ml:1859
-msgid "\\\n<!--\n This is an automatically generated libvirt configuration file.\n It was written by the %s program.\n\n Please check the values in this configuration file carefully,\n particularly maxmem, memory, vcpu and any paths.\n\n To start the domain, do:\n virsh%s define %s\n virsh%s start %s\n-->\\n\\n"
-msgstr "\\\n<!--\n To jest automatycznie utworzony plik konfiguracji libvirt.\n Został zapisany przez program %s.\n\n Dokładnie sprawdź wartości w tym pliku konfiguracji,\n zwłaszcza maxmem, memory, vcpu i wszystkie ścieżki.\n\n Aby uruchomić domenę, wykonaj:\n virsh%s define %s\n virsh%s start %s\n-->\\n\\n"
-
-#: ../.tmp.virt-p2v.ml:1310 ../.tmp.virt-p2v.ml:1298
-msgid "\\nAuto-configuration failed. Starting a shell.\\n\\nPlease configure the network from this shell.\\n\\nWhen you have finished, exit the shell with ^D or exit.\\n"
-msgstr "\\nAutomatyczna konfiguracja nie powiodła się. Uruchamianie powłoki.\\n\\nSkonfiguruj sieć z tej powłoki.\\n\\nKiedy skończysz zakończ powłokę za pomocą ^D lub exit.\\n"
-
#: ../.tmp.virt-p2v.ml:1898
+msgid ""
+"\\\n"
+"<!--\n"
+" This is an automatically generated libvirt configuration file.\n"
+" It was written by the %s program.\n"
+"\n"
+" Please check the values in this configuration file carefully,\n"
+" particularly maxmem, memory, vcpu and any paths.\n"
+"\n"
+" To start the domain, do:\n"
+" virsh%s define %s\n"
+" virsh%s start %s\n"
+"-->\\n\\n"
+msgstr ""
+"\\\n"
+"<!--\n"
+" To jest automatycznie utworzony plik konfiguracji libvirt.\n"
+" Został zapisany przez program %s.\n"
+"\n"
+" Dokładnie sprawdź wartości w tym pliku konfiguracji,\n"
+" zwłaszcza maxmem, memory, vcpu i wszystkie ścieżki.\n"
+"\n"
+" Aby uruchomić domenę, wykonaj:\n"
+" virsh%s define %s\n"
+" virsh%s start %s\n"
+"-->\\n\\n"
+
+#: ../.tmp.virt-p2v.ml:1345 ../.tmp.virt-p2v.ml:1333
+msgid ""
+"\\nAuto-configuration failed. Starting a shell.\\n\\nPlease configure the "
+"network from this shell.\\n\\nWhen you have finished, exit the shell with ^D "
+"or exit.\\n"
+msgstr ""
+"\\nAutomatyczna konfiguracja nie powiodła się. Uruchamianie powłoki.\\n"
+"\\nSkonfiguruj sieć z tej powłoki.\\n\\nKiedy skończysz zakończ powłokę za "
+"pomocą ^D lub exit.\\n"
+
+#: ../.tmp.virt-p2v.ml:1937
msgid "\\nSending /dev/%s (%.3f GB) to remote machine\\n\\n%!"
msgstr "\\nWysyłanie /dev/%s (%.3f GB) na zdalny komputer\\n\\n%!"
-#: ../.tmp.virt-p2v.ml:1961
-msgid "\\nThe physical to virtual migration is complete.\\n\\nPlease verify the disk image(s) and configuration file on the remote host, and then start up the virtual machine by doing:\\n\\ncd %s\\nvirsh define %s\\n\\nWhen you press [OK] this machine will reboot."
-msgstr "\\nMigracja fizycznego do wirtualnego została zakończona.\\n\\nSprawdź obrazy dysków i plik konfiguracji na zdalnym hoście, a potem uruchom maszynę wirtualną wykonując:\\n\\ncd %s\\nvirsh define %s\\n\\nPo naciśnięciu [OK] ta maszyna zostanie ponownie uruchomiona."
+#: ../.tmp.virt-p2v.ml:2000
+msgid ""
+"\\nThe physical to virtual migration is complete.\\n\\nPlease verify the "
+"disk image(s) and configuration file on the remote host, and then start up "
+"the virtual machine by doing:\\n\\ncd %s\\nvirsh define %s\\n\\nWhen you "
+"press [OK] this machine will reboot."
+msgstr ""
+"\\nMigracja fizycznego do wirtualnego została zakończona.\\n\\nSprawdź "
+"obrazy dysków i plik konfiguracji na zdalnym hoście, a potem uruchom maszynę "
+"wirtualną wykonując:\\n\\ncd %s\\nvirsh define %s\\n\\nPo naciśnięciu [OK] "
+"ta maszyna zostanie ponownie uruchomiona."
-#: ../.tmp.virt-p2v.ml:1877
+#: ../.tmp.virt-p2v.ml:1916
msgid "\\nWriting configuration file ...\\n"
msgstr "\\nZapisywanie pliku konfiguracji...\\n"
#: ../.tmp.virt-p2v.ml:706
-msgid "\\n\\nDid SSH work?\\nHint: If not sure, there is a shell on console [ALT] [F2]\\n"
-msgstr "\\n\\nCzy SSH działa?\\nWskazówka: jeśli nie jesteś pewny, powłoka znajduje się na konsoli [ALT] [F2]\\n"
+msgid ""
+"\\n\\nDid SSH work?\\nHint: If not sure, there is a shell on console [ALT] "
+"[F2]\\n"
+msgstr ""
+"\\n\\nCzy SSH działa?\\nWskazówka: jeśli nie jesteś pewny, powłoka znajduje "
+"się na konsoli [ALT] [F2]\\n"
#: ../.tmp.virt-p2v.ml:622
-msgid "\\n\\nDid automatic network configuration work?\\nHint: If not sure, there is a shell on console [ALT] [F2]"
-msgstr "\\n\\nCzy automatyczna konfiguracja sieci działa?\\nWskazówka: jeśli nie jesteś pewny, powłoka znajduje się na konsoli [ALT] [F2]"
+msgid ""
+"\\n\\nDid automatic network configuration work?\\nHint: If not sure, there "
+"is a shell on console [ALT] [F2]"
+msgstr ""
+"\\n\\nCzy automatyczna konfiguracja sieci działa?\\nWskazówka: jeśli nie "
+"jesteś pewny, powłoka znajduje się na konsoli [ALT] [F2]"
#: ../.tmp.virt-p2v.ml:347
-msgid "\\n\\nIf you want to report this error, there is a shell on [ALT] [F2], log in as root with no password.\\n\\nPlease provide the contents of /tmp/virt-p2v.log and output of the 'dmesg' command."
-msgstr "\\n\\nJeśli chcesz zgłosić ten błąd, powłoka znajduje się na [ALT] [F2], zaloguj się jako root bez hasła.\\n\\nProsimy dostarczyć zawartość /tmp/virt-p2v.log i wyjścia polecenia \"dmesg\"."
+msgid ""
+"\\n\\nIf you want to report this error, there is a shell on [ALT] [F2], log "
+"in as root with no password.\\n\\nPlease provide the contents of /tmp/virt-"
+"p2v.log and output of the 'dmesg' command."
+msgstr ""
+"\\n\\nJeśli chcesz zgłosić ten błąd, powłoka znajduje się na [ALT] [F2], "
+"zaloguj się jako root bez hasła.\\n\\nProsimy dostarczyć zawartość /tmp/virt-"
+"p2v.log i wyjścia polecenia \"dmesg\"."
#: ../.tmp.virt-p2v.ml:311
msgid "open_centered_window: not in newt mode"
msgid "unexpected output: "
msgstr "nieoczekiwane wyjście: "
-#: ../.tmp.virt-p2v.ml:1973
+#: ../.tmp.virt-p2v.ml:2012
msgid "usage: virt-p2v [--test] [ttyname]\\n%!"
msgstr "użycie: virt-p2v [--test] [nazwatty]\\n%!"
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2008-03-26 14:15+0000\n"
+"POT-Creation-Date: 2008-11-03 11:19+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
-#: ../.tmp.virt-p2v.ml:1973
+#: ../.tmp.virt-p2v.ml:2083
msgid " (about %.0f minutes remaining)"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1976
+#: ../.tmp.virt-p2v.ml:2086
msgid " (about %.0f seconds remaining)"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1999
+#: ../.tmp.virt-p2v.ml:2109
msgid "%s has finished"
msgstr ""
-#: ../.tmp.virt-p2v.ml:850
+#: ../.tmp.virt-p2v.ml:1000
msgid "%s starting up ...\\n%!"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1521
+#: ../.tmp.virt-p2v.ml:1609
msgid "(leave MAC blank for random)"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1485
+#: ../.tmp.virt-p2v.ml:1576
msgid "Architecture:"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1209
+#: ../.tmp.virt-p2v.ml:1305
msgid "Automatic from:"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1446
+#: ../.tmp.virt-p2v.ml:1541
msgid "Block devices"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1515
+#: ../.tmp.virt-p2v.ml:1603
msgid "CPUs:"
msgstr ""
-#: ../.tmp.virt-p2v.ml:453
+#: ../.tmp.virt-p2v.ml:532
msgid "Command failed:\\n\\n%s"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1179
+#: ../.tmp.virt-p2v.ml:1275
msgid "Configure network"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1476
+#: ../.tmp.virt-p2v.ml:1567
msgid "Configure target system"
msgstr ""
-#: ../.tmp.virt-p2v.ml:862
+#: ../.tmp.virt-p2v.ml:1012
msgid "Detecting hard drives (this may take some time) ..."
msgstr ""
-#: ../.tmp.virt-p2v.ml:594
+#: ../.tmp.virt-p2v.ml:746
msgid "Disk snapshot failed: unable to read the size in sectors of block device %s"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1225
+#: ../.tmp.virt-p2v.ml:1321
msgid "Don't configure the network"
msgstr ""
-#: ../.tmp.virt-p2v.ml:348
+#: ../.tmp.virt-p2v.ml:427
msgid "Error"
msgstr ""
-#: ../.tmp.virt-p2v.ml:320
+#: ../.tmp.virt-p2v.ml:399
msgid "F12 for next screen | [ALT] [F2] root / no password for shell"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1074
+#: ../.tmp.virt-p2v.ml:1206
msgid "Finished detecting hard drives."
msgstr ""
-#: ../.tmp.virt-p2v.ml:1236
+#: ../.tmp.virt-p2v.ml:1332
msgid "Gateway"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1478
+#: ../.tmp.virt-p2v.ml:1569
msgid "Hypervisor:"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1232
+#: ../.tmp.virt-p2v.ml:1328
msgid "IP"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1230
+#: ../.tmp.virt-p2v.ml:1326
msgid "Interface"
msgstr ""
-#: ../.tmp.virt-p2v.ml:237
+#: ../.tmp.virt-p2v.ml:316
msgid "Linux /boot"
msgstr ""
-#: ../.tmp.virt-p2v.ml:233
+#: ../.tmp.virt-p2v.ml:312
msgid "Linux swap"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1518
+#: ../.tmp.virt-p2v.ml:1606
msgid "MAC addr:"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1512
+#: ../.tmp.virt-p2v.ml:1600
msgid "Memory (MB):"
msgstr ""
-#: ../.tmp.virt-p2v.ml:238
+#: ../.tmp.virt-p2v.ml:317
msgid "Mountable non-root"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1238
+#: ../.tmp.virt-p2v.ml:1334
msgid "Nameserver"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1234
+#: ../.tmp.virt-p2v.ml:1330
msgid "Netmask"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1178
+#: ../.tmp.virt-p2v.ml:1274
msgid "Network"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1326
+#: ../.tmp.virt-p2v.ml:1422
msgid "Network configuration.\\n\\nPlease configure the network from this shell.\\n\\nWhen you have finished, exit the shell with ^D or exit.\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:892
+#: ../.tmp.virt-p2v.ml:1023
msgid "No non-removable block devices (hard disks, etc.) could be found on this machine."
msgstr ""
-#: ../.tmp.virt-p2v.ml:1654
+#: ../.tmp.virt-p2v.ml:1742
msgid "Note"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1696
+#: ../.tmp.virt-p2v.ml:1784
msgid "Performing LVM snapshots ...\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1132
+#: ../.tmp.virt-p2v.ml:1261
msgid "Physical to Virtual (P2V)"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1222
+#: ../.tmp.virt-p2v.ml:1318
msgid "QEMU user network"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1376
+#: ../.tmp.virt-p2v.ml:1472
msgid "Remote directory"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1372
+#: ../.tmp.virt-p2v.ml:1468
msgid "Remote host"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1649
+#: ../.tmp.virt-p2v.ml:1737
msgid "Remote hypervisor claims not to support fully virtualized %s guests.\\n\\nContinuing anyway.\\n\\n%!"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1655
+#: ../.tmp.virt-p2v.ml:1743
msgid "Remote hypervisor supports multiple types of fully virtualized %s guests.\\n\\nPlease help further development of libvirt and virt-p2v by sending the file /tmp/virt-p2v.log back to the developers. See the main virt-p2v website for contact details."
msgstr ""
-#: ../.tmp.virt-p2v.ml:1374
+#: ../.tmp.virt-p2v.ml:1470
msgid "Remote port"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1467
+#: ../.tmp.virt-p2v.ml:1558
msgid "Root filesystem"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1370 ../.tmp.virt-p2v.ml:1369
+#: ../.tmp.virt-p2v.ml:1466 ../.tmp.virt-p2v.ml:1465
msgid "SSH configuration"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1427
+#: ../.tmp.virt-p2v.ml:1523
msgid "SSH configuration failed"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1378
+#: ../.tmp.virt-p2v.ml:1474
msgid "SSH username"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1448
+#: ../.tmp.virt-p2v.ml:1543
msgid "Select block devices to send"
msgstr ""
-#: ../.tmp.virt-p2v.ml:842 ../.tmp.virt-p2v.ml:841
+#: ../.tmp.virt-p2v.ml:992 ../.tmp.virt-p2v.ml:991
msgid "Select language"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1468
+#: ../.tmp.virt-p2v.ml:1559
msgid "Select root filesystem"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1143
-msgid "Split partitions"
-msgstr ""
-
-#: ../.tmp.virt-p2v.ml:1146
-msgid "Split partitions lets you resize partitions during the transfer. This feature is experimental."
-msgstr ""
-
-#: ../.tmp.virt-p2v.ml:1212
+#: ../.tmp.virt-p2v.ml:1308
msgid "Start a shell"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1228
+#: ../.tmp.virt-p2v.ml:1324
msgid "Static configuration:"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1475
+#: ../.tmp.virt-p2v.ml:1566
msgid "Target system"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1391
+#: ../.tmp.virt-p2v.ml:1487
msgid "Test SSH connection"
msgstr ""
-#: ../.tmp.virt-p2v.ml:699
+#: ../.tmp.virt-p2v.ml:841
msgid "Testing SSH connection by listing files in remote directory ...\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1129 ../.tmp.virt-p2v.ml:1128
+#: ../.tmp.virt-p2v.ml:1266 ../.tmp.virt-p2v.ml:1265
msgid "Transfer type"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1602
+#: ../.tmp.virt-p2v.ml:1690
msgid "Try to fetch remote hypervisor capabilities ...\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1355
+#: ../.tmp.virt-p2v.ml:1451
msgid "Trying QEMU network configuration.\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1339
+#: ../.tmp.virt-p2v.ml:1435
msgid "Trying network auto-configuration from root filesystem ...\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1330
+#: ../.tmp.virt-p2v.ml:1426
msgid "Trying static network configuration.\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:239
+#: ../.tmp.virt-p2v.ml:318
msgid "Unknown partition type"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1387
+#: ../.tmp.virt-p2v.ml:1483
msgid "Use SSH compression (not good for LANs)"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1524
+#: ../.tmp.virt-p2v.ml:1612
msgid "Use remote libvirtd"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1135
+#: ../.tmp.virt-p2v.ml:1262
msgid "Virtual to Virtual (V2V)"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1648
+#: ../.tmp.virt-p2v.ml:1736
msgid "Warning"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1121
+#: ../.tmp.virt-p2v.ml:1253
msgid "Welcome to %s, a live CD for migrating a physical machine to a virtualized host.\\n\\nTo continue press the Return key.\\n\\nTo get a shell you can use [ALT] [F2] and log in as root with no password.\\n\\nExtra information is logged in /tmp/virt-p2v.log but this file disappears when the machine reboots."
msgstr ""
-#: ../.tmp.virt-p2v.ml:236
+#: ../.tmp.virt-p2v.ml:315
msgid "Windows root"
msgstr ""
-#: ../.tmp.virt-p2v.ml:858
+#: ../.tmp.virt-p2v.ml:1008
msgid "You should only run this script from the live CD or a USB key."
msgstr ""
-#: ../.tmp.virt-p2v.ml:1898
+#: ../.tmp.virt-p2v.ml:2006
msgid "\\\n<!--\n This is an automatically generated libvirt configuration file.\n It was written by the %s program.\n\n Please check the values in this configuration file carefully,\n particularly maxmem, memory, vcpu and any paths.\n\n To start the domain, do:\n virsh%s define %s\n virsh%s start %s\n-->\\n\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1345 ../.tmp.virt-p2v.ml:1333
+#: ../.tmp.virt-p2v.ml:1441 ../.tmp.virt-p2v.ml:1429
msgid "\\nAuto-configuration failed. Starting a shell.\\n\\nPlease configure the network from this shell.\\n\\nWhen you have finished, exit the shell with ^D or exit.\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:1937
+#: ../.tmp.virt-p2v.ml:2046
msgid "\\nSending /dev/%s (%.3f GB) to remote machine\\n\\n%!"
msgstr ""
-#: ../.tmp.virt-p2v.ml:2000
+#: ../.tmp.virt-p2v.ml:2110
msgid "\\nThe physical to virtual migration is complete.\\n\\nPlease verify the disk image(s) and configuration file on the remote host, and then start up the virtual machine by doing:\\n\\ncd %s\\nvirsh define %s\\n\\nWhen you press [OK] this machine will reboot."
msgstr ""
-#: ../.tmp.virt-p2v.ml:1916
+#: ../.tmp.virt-p2v.ml:2024
msgid "\\nWriting configuration file ...\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:706
+#: ../.tmp.virt-p2v.ml:848
msgid "\\n\\nDid SSH work?\\nHint: If not sure, there is a shell on console [ALT] [F2]\\n"
msgstr ""
-#: ../.tmp.virt-p2v.ml:622
+#: ../.tmp.virt-p2v.ml:774
msgid "\\n\\nDid automatic network configuration work?\\nHint: If not sure, there is a shell on console [ALT] [F2]"
msgstr ""
-#: ../.tmp.virt-p2v.ml:347
+#: ../.tmp.virt-p2v.ml:426
msgid "\\n\\nIf you want to report this error, there is a shell on [ALT] [F2], log in as root with no password.\\n\\nPlease provide the contents of /tmp/virt-p2v.log and output of the 'dmesg' command."
msgstr ""
-#: ../.tmp.virt-p2v.ml:311
+#: ../.tmp.virt-p2v.ml:390
msgid "open_centered_window: not in newt mode"
msgstr ""
-#: ../.tmp.virt-p2v.ml:472
+#: ../.tmp.virt-p2v.ml:551
msgid "shget: command killed by signal %d"
msgstr ""
-#: ../.tmp.virt-p2v.ml:474
+#: ../.tmp.virt-p2v.ml:553
msgid "shget: command stopped by signal %d"
msgstr ""
-#: ../.tmp.virt-p2v.ml:684
+#: ../.tmp.virt-p2v.ml:826
msgid "ssh: exited with error code %d"
msgstr ""
-#: ../.tmp.virt-p2v.ml:685
+#: ../.tmp.virt-p2v.ml:827
msgid "ssh: killed by signal %d"
msgstr ""
-#: ../.tmp.virt-p2v.ml:686
+#: ../.tmp.virt-p2v.ml:828
msgid "ssh: stopped by signal %d"
msgstr ""
-#: ../.tmp.virt-p2v.ml:551
+#: ../.tmp.virt-p2v.ml:622
msgid "unexpected output: "
msgstr ""
-#: ../.tmp.virt-p2v.ml:2012
+#: ../.tmp.virt-p2v.ml:2122
msgid "usage: virt-p2v [--test] [ttyname]\\n%!"
msgstr ""
--- /dev/null
+# translation of virt-p2v.tip.po to Simplified Chinese
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Leah Liu <lliu@redhat.com>, 2008.
+msgid ""
+msgstr ""
+"Project-Id-Version: virt-p2v.tip\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2008-03-26 14:15+0000\n"
+"PO-Revision-Date: 2008-10-13 13:11+1000\n"
+"Last-Translator: Leah Liu <lliu@redhat.com>\n"
+"Language-Team: Simplified Chinese <zh@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: ../.tmp.virt-p2v.ml:1973
+msgid " (about %.0f minutes remaining)"
+msgstr "（大约还剩 %.0f 分）"
+
+#: ../.tmp.virt-p2v.ml:1976
+msgid " (about %.0f seconds remaining)"
+msgstr "（大约还剩 %.0f 秒）"
+
+#: ../.tmp.virt-p2v.ml:1999
+msgid "%s has finished"
+msgstr "%s 以完成"
+
+#: ../.tmp.virt-p2v.ml:850
+msgid "%s starting up ...\\n%!"
+msgstr "%s 启动 ...\\n%!"
+
+#: ../.tmp.virt-p2v.ml:1521
+msgid "(leave MAC blank for random)"
+msgstr "（将 MAC 保留为空白以便随机选择）"
+
+#: ../.tmp.virt-p2v.ml:1485
+msgid "Architecture:"
+msgstr "构架："
+
+#: ../.tmp.virt-p2v.ml:1209
+msgid "Automatic from:"
+msgstr "自动的："
+
+#: ../.tmp.virt-p2v.ml:1446
+msgid "Block devices"
+msgstr "块设备"
+
+#: ../.tmp.virt-p2v.ml:1515
+msgid "CPUs:"
+msgstr "CPU："
+
+#: ../.tmp.virt-p2v.ml:453
+msgid "Command failed:\\n\\n%s"
+msgstr "命令失败：\\n\\n%s"
+
+#: ../.tmp.virt-p2v.ml:1179
+msgid "Configure network"
+msgstr "配置网络"
+
+#: ../.tmp.virt-p2v.ml:1476
+msgid "Configure target system"
+msgstr "配置目标系统"
+
+#: ../.tmp.virt-p2v.ml:862
+msgid "Detecting hard drives (this may take some time) ..."
+msgstr "侦测硬驱动器（可能会需要一些时间）......"
+
+#: ../.tmp.virt-p2v.ml:594
+msgid "Disk snapshot failed: unable to read the size in sectors of block device %s"
+msgstr "磁盘快照失败：无法在块设备 %s 部分读取大小"
+
+#: ../.tmp.virt-p2v.ml:1225
+msgid "Don't configure the network"
+msgstr "不要配置网络"
+
+#: ../.tmp.virt-p2v.ml:348
+msgid "Error"
+msgstr "错误"
+
+#: ../.tmp.virt-p2v.ml:320
+msgid "F12 for next screen | [ALT] [F2] root / no password for shell"
+msgstr "按 F12 到下一屏 | [ALT] [F2] root / 没有 shell 密码"
+
+#: ../.tmp.virt-p2v.ml:1074
+msgid "Finished detecting hard drives."
+msgstr "完成硬驱动器侦测。"
+
+#: ../.tmp.virt-p2v.ml:1236
+msgid "Gateway"
+msgstr "网关"
+
+#: ../.tmp.virt-p2v.ml:1478
+msgid "Hypervisor:"
+msgstr "监控程序："
+
+#: ../.tmp.virt-p2v.ml:1232
+msgid "IP"
+msgstr "IP"
+
+#: ../.tmp.virt-p2v.ml:1230
+msgid "Interface"
+msgstr "接口"
+
+#: ../.tmp.virt-p2v.ml:237
+msgid "Linux /boot"
+msgstr "Linux /boot"
+
+#: ../.tmp.virt-p2v.ml:233
+msgid "Linux swap"
+msgstr "Linux swap"
+
+#: ../.tmp.virt-p2v.ml:1518
+msgid "MAC addr:"
+msgstr "MAC addr："
+
+#: ../.tmp.virt-p2v.ml:1512
+msgid "Memory (MB):"
+msgstr "内存（MB）："
+
+#: ../.tmp.virt-p2v.ml:238
+msgid "Mountable non-root"
+msgstr "非根可挂载"
+
+#: ../.tmp.virt-p2v.ml:1238
+msgid "Nameserver"
+msgstr "名称服务器"
+
+#: ../.tmp.virt-p2v.ml:1234
+msgid "Netmask"
+msgstr "子网掩码"
+
+#: ../.tmp.virt-p2v.ml:1178
+msgid "Network"
+msgstr "网络"
+
+#: ../.tmp.virt-p2v.ml:1326
+msgid "Network configuration.\\n\\nPlease configure the network from this shell.\\n\\nWhen you have finished, exit the shell with ^D or exit.\\n"
+msgstr "网络配置：\\n\\n请在这个 shell 中配置网络。\\n\\n完成后使用大写 D 或者 exit 命令退出该 shell。\\n"
+
+#: ../.tmp.virt-p2v.ml:892
+msgid "No non-removable block devices (hard disks, etc.) could be found on this machine."
+msgstr "在这台机器中无法找到无法删除的块设备（硬盘等）。"
+
+#: ../.tmp.virt-p2v.ml:1654
+msgid "Note"
+msgstr "备注"
+
+#: ../.tmp.virt-p2v.ml:1696
+msgid "Performing LVM snapshots ...\\n"
+msgstr "执行 LVM 快照...... \\n"
+
+#: ../.tmp.virt-p2v.ml:1132
+msgid "Physical to Virtual (P2V)"
+msgstr "物理到虚拟（P2V）"
+
+#: ../.tmp.virt-p2v.ml:1222
+msgid "QEMU user network"
+msgstr "QEMU 用户网络"
+
+#: ../.tmp.virt-p2v.ml:1376
+msgid "Remote directory"
+msgstr "远程目录"
+
+#: ../.tmp.virt-p2v.ml:1372
+msgid "Remote host"
+msgstr "远程主机"
+
+#: ../.tmp.virt-p2v.ml:1649
+msgid "Remote hypervisor claims not to support fully virtualized %s guests.\\n\\nContinuing anyway.\\n\\n%!"
+msgstr "远程监控程序生命无法支持全虚拟的 %s 客户端。\\n\\n 无论如何都继续。\\n\\n%!"
+
+#: ../.tmp.virt-p2v.ml:1655
+msgid "Remote hypervisor supports multiple types of fully virtualized %s guests.\\n\\nPlease help further development of libvirt and virt-p2v by sending the file /tmp/virt-p2v.log back to the developers. See the main virt-p2v website for contact details."
+msgstr "远程监控程序支持多种类型的全虚拟 %s 客户端。\\n\\n请将文件 /tmp/virt-p2v.log 发还给开发者以便帮助其进一步开发 libvirt 和 virt-p2v。联络信息请参考主 virt-p2v 网页。"
+
+#: ../.tmp.virt-p2v.ml:1374
+msgid "Remote port"
+msgstr "远程端口"
+
+#: ../.tmp.virt-p2v.ml:1467
+msgid "Root filesystem"
+msgstr "根文件系统"
+
+#: ../.tmp.virt-p2v.ml:1370 ../.tmp.virt-p2v.ml:1369
+msgid "SSH configuration"
+msgstr "SSH 配置"
+
+#: ../.tmp.virt-p2v.ml:1427
+msgid "SSH configuration failed"
+msgstr "SSH 配置失败"
+
+#: ../.tmp.virt-p2v.ml:1378
+msgid "SSH username"
+msgstr "SSH 用户名"
+
+#: ../.tmp.virt-p2v.ml:1448
+msgid "Select block devices to send"
+msgstr "选择要发送的块设备"
+
+#: ../.tmp.virt-p2v.ml:842 ../.tmp.virt-p2v.ml:841
+msgid "Select language"
+msgstr "选择语言"
+
+#: ../.tmp.virt-p2v.ml:1468
+msgid "Select root filesystem"
+msgstr "选择根文件系统"
+
+#: ../.tmp.virt-p2v.ml:1143
+msgid "Split partitions"
+msgstr "分割分区"
+
+#: ../.tmp.virt-p2v.ml:1146
+msgid "Split partitions lets you resize partitions during the transfer. This feature is experimental."
+msgstr "分割分区可让您在传送过程中重新定义分区大小。这个特性还在实验阶段。"
+
+#: ../.tmp.virt-p2v.ml:1212
+msgid "Start a shell"
+msgstr "启动一个 shell"
+
+#: ../.tmp.virt-p2v.ml:1228
+msgid "Static configuration:"
+msgstr "静态配置："
+
+#: ../.tmp.virt-p2v.ml:1475
+msgid "Target system"
+msgstr "目标系统"
+
+#: ../.tmp.virt-p2v.ml:1391
+msgid "Test SSH connection"
+msgstr "测试 SSH 连接"
+
+#: ../.tmp.virt-p2v.ml:699
+msgid "Testing SSH connection by listing files in remote directory ...\\n"
+msgstr "通过列出远程目录中的文件测试 SSH 连接 ...... \\n"
+
+#: ../.tmp.virt-p2v.ml:1129 ../.tmp.virt-p2v.ml:1128
+msgid "Transfer type"
+msgstr "传送类型"
+
+#: ../.tmp.virt-p2v.ml:1602
+msgid "Try to fetch remote hypervisor capabilities ...\\n"
+msgstr "尝试使用远程监控程序功能 ...... \\n"
+
+#: ../.tmp.virt-p2v.ml:1355
+msgid "Trying QEMU network configuration.\\n"
+msgstr "正在尝试 QEMU 网络配置。\\n"
+
+#: ../.tmp.virt-p2v.ml:1339
+msgid "Trying network auto-configuration from root filesystem ...\\n"
+msgstr "正在尝试从根文件系统进行网络自动配置 ...... \\n"
+
+#: ../.tmp.virt-p2v.ml:1330
+msgid "Trying static network configuration.\\n"
+msgstr "正在尝试静态网络配置。\\n"
+
+#: ../.tmp.virt-p2v.ml:239
+msgid "Unknown partition type"
+msgstr "未知分区类型"
+
+#: ../.tmp.virt-p2v.ml:1387
+msgid "Use SSH compression (not good for LANs)"
+msgstr "使用 SSH 压缩（对 LAN 不好）"
+
+#: ../.tmp.virt-p2v.ml:1524
+msgid "Use remote libvirtd"
+msgstr "使用远程 libvirtd"
+
+#: ../.tmp.virt-p2v.ml:1135
+msgid "Virtual to Virtual (V2V)"
+msgstr "虚拟到虚拟（V2V）"
+
+#: ../.tmp.virt-p2v.ml:1648
+msgid "Warning"
+msgstr "警告"
+
+#: ../.tmp.virt-p2v.ml:1121
+msgid "Welcome to %s, a live CD for migrating a physical machine to a virtualized host.\\n\\nTo continue press the Return key.\\n\\nTo get a shell you can use [ALT] [F2] and log in as root with no password.\\n\\nExtra information is logged in /tmp/virt-p2v.log but this file disappears when the machine reboots."
+msgstr "欢迎进入 %s，它是一个将物理机器迁移到虚拟主机的实时 CD。\\n\\n要继续，请按 Return 键。\\n\\n要获得 shell，您可以使用 [ALT] [F2]，并以没有密码的根用户登录。\\n\\n其它信息会记录在 /tmp/virt-p2v.log 文件中，但该文件会在重启后消失。"
+
+#: ../.tmp.virt-p2v.ml:236
+msgid "Windows root"
+msgstr "Windows root"
+
+#: ../.tmp.virt-p2v.ml:858
+msgid "You should only run this script from the live CD or a USB key."
+msgstr "您应该只能从实时 CD 或者 USB 设备中运行这个脚本。"
+
+#: ../.tmp.virt-p2v.ml:1898
+msgid "\\\n<!--\n This is an automatically generated libvirt configuration file.\n It was written by the %s program.\n\n Please check the values in this configuration file carefully,\n particularly maxmem, memory, vcpu and any paths.\n\n To start the domain, do:\n virsh%s define %s\n virsh%s start %s\n-->\\n\\n"
+msgstr "\\\n<!--\n 这是一个自动生成的 libvirt 配置文件。\n 它是使用 %s 程序写成的。\n\n请仔细检查这个配置文件中的数值，\n特别是 maxmem、memory、vcpu 以及所有路径。\n\n要启动这个域，请：\n virsh%s define %s\n virsh%s start %s\n-->\\n\\n"
+
+#: ../.tmp.virt-p2v.ml:1345 ../.tmp.virt-p2v.ml:1333
+msgid "\\nAuto-configuration failed. Starting a shell.\\n\\nPlease configure the network from this shell.\\n\\nWhen you have finished, exit the shell with ^D or exit.\\n"
+msgstr "\\n自动配置失败。启动一个 shell。\\n\\n请从这个 shell 配置网络。\\n\\n完成后，请使用大写 D 或者 exit 退出。\\n"
+
+#: ../.tmp.virt-p2v.ml:1937
+msgid "\\nSending /dev/%s (%.3f GB) to remote machine\\n\\n%!"
+msgstr "\\n请将 /dev/%s（%.3f GB）发送到远程机器\\n\\n%!"
+
+#: ../.tmp.virt-p2v.ml:2000
+msgid "\\nThe physical to virtual migration is complete.\\n\\nPlease verify the disk image(s) and configuration file on the remote host, and then start up the virtual machine by doing:\\n\\ncd %s\\nvirsh define %s\\n\\nWhen you press [OK] this machine will reboot."
+msgstr "\\n物理到虚拟迁移完成。\\n\\n请确认远程主机中的磁盘映像和配置文件，然后启动虚拟机，操作如下：\\n\\ncd %s\\nvirsh define %s\\n\\n当您按[确定]后，这台机器会重启。"
+
+#: ../.tmp.virt-p2v.ml:1916
+msgid "\\nWriting configuration file ...\\n"
+msgstr "\\n写入配置文件 ...... \\n"
+
+#: ../.tmp.virt-p2v.ml:706
+msgid "\\n\\nDid SSH work?\\nHint: If not sure, there is a shell on console [ALT] [F2]\\n"
+msgstr "\\n\\SSH 正常吗？\\n提示：如果不确定，可查看位于控制台 [ALT] [F2] 的 shell\\n"
+
+#: ../.tmp.virt-p2v.ml:622
+msgid "\\n\\nDid automatic network configuration work?\\nHint: If not sure, there is a shell on console [ALT] [F2]"
+msgstr "\\n\\n自动网络配置正确吗？\\n提示：如果不确定，可查看位于控制台 [ALT] [F2] 的 shell"
+
+#: ../.tmp.virt-p2v.ml:347
+msgid "\\n\\nIf you want to report this error, there is a shell on [ALT] [F2], log in as root with no password.\\n\\nPlease provide the contents of /tmp/virt-p2v.log and output of the 'dmesg' command."
+msgstr "\\n\\n如果您要报告这个错误，请在 [ALT] [F2] shell 中以没有密码的根用户登录。\\n\\n请提供 /tmp/virt-p2v.log 的内容以及 'dmesg' 命令的输出。"
+
+#: ../.tmp.virt-p2v.ml:311
+msgid "open_centered_window: not in newt mode"
+msgstr "open_centered_window：不在 newt 模式"
+
+#: ../.tmp.virt-p2v.ml:472
+msgid "shget: command killed by signal %d"
+msgstr "shget：命令被信号 %d 终止"
+
+#: ../.tmp.virt-p2v.ml:474
+msgid "shget: command stopped by signal %d"
+msgstr "shget：命令被信号 %d 停止"
+
+#: ../.tmp.virt-p2v.ml:684
+msgid "ssh: exited with error code %d"
+msgstr "ssh：退出时有出错编码 %d "
+
+#: ../.tmp.virt-p2v.ml:685
+msgid "ssh: killed by signal %d"
+msgstr "ssh：被信号 %d 终止"
+
+#: ../.tmp.virt-p2v.ml:686
+msgid "ssh: stopped by signal %d"
+msgstr "ssh：被信号 %d 停止"
+
+#: ../.tmp.virt-p2v.ml:551
+msgid "unexpected output: "
+msgstr "意外的输出："
+
+#: ../.tmp.virt-p2v.ml:2012
+msgid "usage: virt-p2v [--test] [ttyname]\\n%!"
+msgstr "用法：virt-p2v [--test] [ttyname]\\n%!"
+
git.annexia.org / virt-p2v.git / commitdiff