* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*)
-#load "unix.cma";;
-#directory "+extlib";;
-#load "extLib.cma";;
-#directory "+pcre";;
-#load "pcre.cma";;
-#directory "+xml-light";;
-#load "xml-light.cma";;
-
-open Unix
-open Printf
-open ExtList
-open ExtString
-
-type state = { greeting : bool;
- remote_host : string option; remote_port : string option;
- remote_directory : string option;
- remote_username : string option;
- network : network option;
- static_network_config : static_network_config option;
- devices_to_send : string list option;
- root_filesystem : partition option;
- hypervisor : hypervisor option;
- architecture : architecture option;
- memory : int option; vcpus : int option;
- mac_address : string option;
- compression : bool option;
- }
-and network = Auto
- | Shell
- | QEMUUserNet
- | Static
-and partition = Part of string * string (* eg. "hda", "1" *)
- | LV of string * string (* eg. "VolGroup00", "LogVol00" *)
-and hypervisor = Xen | QEMU | KVM
-and architecture = I386 | X86_64 | IA64 | PPC | PPC64 | SPARC | SPARC64
- | OtherArch of string | UnknownArch
-and static_network_config = string * string * string * string * string
- (* interface, address, netmask, gateway, nameserver *)
+type partition =
+ | Part of string * string (* eg. "hda", "1" *)
+ | LV of string * string (* eg. "VolGroup00", "LogVol00" *)
+type transfer =
+ | P2V (* physical to virtual *)
+ | V2V (* virtual to virtual *)
+ (*| V2P*) (* virtual to physical - not impl *)
+type network =
+ | Auto of partition (* Automatic network configuration. *)
+ | Shell (* Start a shell. *)
+ | QEMUUserNet (* Assume we're running under qemu. *)
+ | Static of string * string * string * string * string
+ (* interface, address, netmask, gateway, nameserver *)
+ | NoNetwork
+type ssh_config = {
+ ssh_host : string; (* Remote host for SSH. *)
+ ssh_port : string; (* Remote port. *)
+ ssh_directory : string; (* Remote directory. *)
+ ssh_username : string; (* Remote username. *)
+ ssh_compression : bool; (* If true, use SSH compression. *)
+ ssh_check : bool; (* If true, check SSH is working. *)
+}
+type hypervisor =
+ | Xen
+ | QEMU
+ | KVM
+type architecture =
+ | I386 | X86_64 | IA64 | PPC | PPC64 | SPARC | SPARC64
+ | OtherArch of string
+ | UnknownArch
+type wordsize =
+ | W32 | W64 | WUnknown
+type target_config = {
+ tgt_hypervisor : hypervisor option; (* Remote hypervisor. *)
+ tgt_architecture : architecture; (* Remote architecture. *)
+ tgt_memory : int; (* Memory (megabytes). *)
+ tgt_vcpus : int; (* Number of virtual CPUs. *)
+ tgt_mac_address : string; (* MAC address. *)
+ tgt_libvirtd : bool; (* True if libvirtd on remote. *)
+}
(*----------------------------------------------------------------------*)
-(* TO MAKE A CUSTOM virt-p2v SCRIPT, adjust the defaults in this section.
+(* TO MAKE A CUSTOM VIRT-P2V SCRIPT, adjust the defaults in this section.
*
* If left as they are, then this will create a generic virt-p2v script
* which asks the user for each question. If you set the defaults here
*
* Note that 'None' means 'no default' (ie. ask the user) whereas
* 'Some foo' means use 'foo' as the answer.
+ *
+ * These are documented in the virt-p2v(1) manual page.
+ *
+ * After changing them, run './virt-p2v --test' to check syntax.
*)
-let defaults = {
- (* If greeting is true, wait for keypress after boot and during
- * final verification. Set to 'false' for less interactions.
- *)
- greeting = true;
- (* These are now documented in the man page virt-p2v(1).
- * 'None' means ask the user.
- * After changing them, run './virt-p2v --test' to check syntax.
- *)
- remote_host = None;
- remote_port = None;
- remote_directory = None;
- remote_username = None;
- devices_to_send = None;
- root_filesystem = None;
- network = None;
- static_network_config = None;
- hypervisor = None;
- architecture = None;
- memory = None;
- vcpus = None;
- mac_address = None;
- compression = None;
-}
+(* If greeting is true, wait for keypress after boot and during
+ * final verification. Set to 'false' for less interactions.
+ *)
+let config_greeting = ref true
+
+(* General type of transfer. *)
+let config_transfer_type = ref None
+
+(* Network configuration. *)
+let config_network = ref None
+
+(* SSH configuration. *)
+let config_ssh = ref None
+
+(* What to transfer. *)
+let config_devices_to_send = ref None
+let config_root_filesystem = ref None
+
+(* Configuration of the target. *)
+let config_target = ref None
+
+(* The name of the program as displayed in various places. *)
+let program_name = "virt-p2v"
+
+(* If you want to test the dialog stages, set this to true. *)
+let test_dialog_stages = false
+
(* END OF CUSTOM virt-p2v SCRIPT SECTION. *)
(*----------------------------------------------------------------------*)
+(* Load external libraries. *)
+;;
+#use "topfind";;
+#require "extlib";;
+#require "pcre";;
+#require "newt";;
+#require "xml-light";;
+#require "gettext-stub";;
+#require "libvirt";;
+
+open Unix
+open Printf
+open ExtList
+open ExtString
+
+(*----------------------------------------------------------------------*)
+(* Gettext support.
+ *
+ * Use s_ "string" to mark a translatable string, and f_ "string %s"
+ * to mark a format string (eg. for printf). There are other
+ * functions: see ocaml-gettext manual and GNU gettext info.
+ *
+ * Try not to mark strings which always go to the log file (eg.
+ * eprintf messages).
+ *)
+
+module P2VGettext = Gettext.Program (
+ struct
+ let textdomain = "virt-p2v"
+ let codeset = None
+ let dir = None
+ let dependencies = []
+ end
+) (GettextStub.Native)
+open P2VGettext
+
+let supported_langs =
+ (* Note these strings are NOT translated! *)
+ let nonasian_langs = [
+ "English", "en_US.UTF-8";
+ ] in
+ let asian_langs = [
+ "\xE6\x97\xA5\xE6\x9C\xAC\xE8\xAA\x9E (Japanese)", "ja_JP.UTF-8"
+ ] in
+ (* Linux console doesn't support Asian or RTL languages. *)
+ let term = try getenv "TERM" with Not_found -> "" in
+ match term with
+ | "linux" -> nonasian_langs
+ | _ -> nonasian_langs @ asian_langs
+
+(*----------------------------------------------------------------------*)
(* General helper functions. *)
let sort_uniq ?(cmp = compare) xs = (* sort and uniq a list *)
| OtherArch arch -> arch
| UnknownArch -> ""
-type dialog_status = Yes of string list | No | Help | Back | Error
-
-type ask_result = Next of state | Prev | Ask_again
+let architecture_of_string = function
+ | str when
+ String.length str = 4 &&
+ (str.[0] = 'i' || str.[0] = 'I') &&
+ (str.[1] >= '3' && str.[1] <= '6') &&
+ str.[2] = '8' && str.[3] = '6' -> I386
+ | "x86_64" | "X86_64" | "x86-64" | "X86-64" -> X86_64
+ | "ia64" | "IA64" -> IA64
+ | "ppc" | "PPC" | "ppc32" | "PPC32" -> PPC
+ | "ppc64" | "PPC64" -> PPC64
+ | "sparc" | "SPARC" | "sparc32" | "SPARC32" -> SPARC
+ | "sparc64" | "SPARC64" -> SPARC64
+ | "" -> UnknownArch
+ | str -> OtherArch str
+
+let wordsize_of_architecture = function
+ | I386 -> W32
+ | X86_64 -> W64
+ | IA64 -> W64
+ | PPC -> W32
+ | PPC64 -> W64
+ | SPARC -> W32
+ | SPARC64 -> W64
+ | OtherArch arch -> WUnknown
+ | UnknownArch -> WUnknown
type nature = LinuxSwap
| LinuxRoot of architecture * linux_distro
| OtherLinux
let rec string_of_nature = function
- | LinuxSwap -> "Linux swap"
+ | LinuxSwap -> s_ "Linux swap"
| LinuxRoot (architecture, distro) ->
string_of_linux_distro distro ^ " " ^ string_of_architecture architecture
- | WindowsRoot -> "Windows root"
- | LinuxBoot -> "Linux /boot"
- | NotRoot -> "Mountable non-root"
- | UnknownNature -> "Unknown"
+ | WindowsRoot -> s_ "Windows root"
+ | LinuxBoot -> s_ "Linux /boot"
+ | NotRoot -> s_ "Mountable non-root"
+ | UnknownNature -> s_ "Unknown partition type"
and string_of_linux_distro = function
| RHEL (a,b) -> sprintf "RHEL %d.%d" a b
| Fedora v -> sprintf "Fedora %d" v
| Debian (a,b) -> sprintf "Debian %d.%d" a b
| OtherLinux -> "Linux"
-(* Dialog functions.
- *
- * Each function takes some common parameters (eg. ~title) and some
- * dialog-specific parameters.
- *
- * Returns the exit status (Yes lines | No | Help | Back | Error).
- *)
-let msgbox, yesno, inputbox, radiolist, checklist, form =
- (* Internal function to actually run the "dialog" shell command. *)
- let run_dialog cparams params =
- let params = cparams @ params in
- eprintf "dialog %s\n%!"
- (String.concat " " (List.map (sprintf "%S") params));
-
- (* 'dialog' writes its output/result to stderr, so we need to take
- * special steps to capture that - in other words, manual pipe/fork.
- *)
- let rfd, wfd = pipe () in
- match fork () with
- | 0 -> (* child, runs dialog *)
- close rfd;
- dup2 wfd stderr; (* capture stderr to pipe *)
- execvp "dialog" (Array.of_list ("dialog" :: params))
- | pid -> (* parent *)
- close wfd;
- let chan = in_channel_of_descr rfd in
- let result = input_all_lines chan in
- close rfd;
- eprintf "dialog result: %S\n%!" (String.concat "\n" result);
- match snd (wait ()) with
- | WEXITED 0 -> Yes result (* something selected / entered *)
- | WEXITED 1 -> No (* cancel / no button *)
- | WEXITED 2 -> Help (* help pressed *)
- | WEXITED 3 -> Back (* back button *)
- | WEXITED _ -> Error (* error or Esc *)
- | WSIGNALED i -> failwith (sprintf "dialog: killed by signal %d" i)
- | WSTOPPED i -> failwith (sprintf "dialog: stopped by signal %d" i)
+(* XML helper functions. *)
+let rec children_with_name name xml =
+ let children = Xml.children xml in
+ List.filter (
+ function
+ | Xml.Element (n, _, _) when n = name -> true
+ | _ -> false
+ ) children
+and xml_has_pcdata_child name pcdata xml =
+ xml_has_child_matching (
+ function
+ | Xml.Element (n, _, [Xml.PCData pcd])
+ when n = name && pcd = pcdata -> true
+ | _ -> false
+ ) xml
+and xml_has_attrib_child name attrib xml =
+ xml_has_child_matching (
+ function
+ | Xml.Element (n, attribs, _)
+ when n = name && List.mem attrib attribs -> true
+ | _ -> false
+ ) xml
+and xml_has_child_matching f xml =
+ let children = Xml.children xml in
+ List.exists f children
+and find_child_with_name name xml =
+ let children = children_with_name name xml in
+ match children with
+ | [] -> raise Not_found
+ | h :: _ -> h
+and find_pcdata_child name xml =
+ let children = children_with_name name xml in
+ let rec loop = function
+ | [] -> raise Not_found
+ | Xml.Element (_, _, [Xml.PCData pcd]) :: _ -> pcd
+ | _ :: tl -> loop tl
in
+ loop children
- (* Handle the common parameters. Note Continuation Passing Style. *)
- let with_common cont
- ?(cancel=false)
- ?(backbutton=true) ?(backbutton_label="Back")
- title =
- let params = ["--title"; title] in
- let params = if not cancel then "--nocancel" :: params else params in
- let params =
- if backbutton then
- "--extra-button" :: "--extra-label" :: backbutton_label :: params
- else params in
- cont params
- in
+type ('a, 'b) either = Either of 'a | Or of 'b
- (* Message box and yes/no box. *)
- let rec msgbox =
- with_common (
- fun cparams text height width ->
- run_dialog cparams
- [ "--msgbox"; text; string_of_int height; string_of_int width ]
- )
- and yesno =
- with_common (
- fun cparams text height width ->
- run_dialog cparams
- [ "--yesno"; text; string_of_int height; string_of_int width ]
- )
+(* We go into and out of newt mode at various stages, but we might
+ * also need to put up a message at any time. This keeps track of
+ * whether we are in newt mode or not.
+ *
+ * General tip: Try to do any complex operations like setting up the
+ * network or probing disks outside newt mode, and try not to throw
+ * exceptions in newt mode.
+ *)
+let in_newt = ref false
+let with_newt f =
+ if !in_newt then f ()
+ else (
+ in_newt := true;
+ let r =
+ try Either (Newt.init_and_finish f)
+ with exn -> Or exn in
+ in_newt := false;
+ match r with Either r -> r | Or exn -> raise exn
+ )
- (* Simple input box. *)
- and inputbox =
- with_common (
- fun cparams text height width default ->
- run_dialog cparams
- [ "--inputbox"; text; string_of_int height; string_of_int width;
- default ]
- )
+(* Clear the screen, open a new centered window, make sure the background
+ * and help messages are consistent.
+ *)
+let open_centered_window ?stage width height title =
+ if not !in_newt then failwith (s_ "open_centered_window: not in newt mode");
+ Newt.cls ();
+ Newt.centered_window width height title;
+ let root_text =
+ program_name ^ (match stage with
+ | None -> ""
+ | Some stage -> " - " ^ stage) in
+ Newt.draw_root_text 0 0 root_text;
+ Newt.push_help_line
+ (s_ "F12 for next screen | [ALT] [F2] root / no password for shell")
+
+let ok_button = " OK "
+
+(* Some general dialog boxes. *)
+let message_box title text =
+ with_newt (
+ fun () ->
+ open_centered_window 40 20 title;
+
+ let textbox = Newt.textbox 1 1 36 14 [Newt.WRAP; Newt.SCROLL] in
+ Newt.textbox_set_text textbox text;
+ let ok = Newt.button 28 16 ok_button in
+ let form = Newt.form None None [] in
+ Newt.form_add_components form [textbox; ok];
+
+ Newt.component_takes_focus ok true;
+
+ ignore (Newt.run_form form);
+ Newt.pop_window ()
+ )
- (* Radio list and check list. *)
- and radiolist =
- with_common (
- fun cparams text height width listheight items ->
- let items = List.map (
- function
- | tag, item, true -> [ tag; item; "on" ]
- | tag, item, false -> [ tag; item; "off" ]
- ) items in
- let items = List.concat items in
- let items = "--single-quoted" ::
- "--radiolist" :: text ::
- string_of_int height :: string_of_int width ::
- string_of_int listheight :: items in
- run_dialog cparams items
- )
- and checklist =
- with_common (
- fun cparams text height width listheight items ->
- let items = List.map (
- function
- | tag, item, true -> [ tag; item; "on" ]
- | tag, item, false -> [ tag; item; "off" ]
+(* Fail and exit with error. *)
+let failwith text =
+ prerr_endline text;
+ let text = "\n"
+ ^ text
+ ^ s_ "\n\nIf you want to report this error, there is a shell on [ALT] [F2], log in as root with no password.\n\nPlease provide the contents of /tmp/virt-p2v.log and output of the 'dmesg' command." in
+ message_box (s_ "Error") text;
+ exit 1
+
+(* Display a dialog with checkboxes, return the multiple selected items. *)
+let select_multiple ?stage ?(force_one = false) width title items =
+ with_newt (
+ fun () ->
+ open_centered_window ?stage width 20 title;
+
+ let entries =
+ List.mapi (
+ fun i (label, handle, selected) ->
+ let cb =
+ Newt.checkbox 1 (i+1) label
+ (if selected then '*' else ' ') None in
+ (handle, cb)
) items in
- let items = List.concat items in
- let items = "--separate-output" ::
- "--checklist" :: text ::
- string_of_int height :: string_of_int width ::
- string_of_int listheight :: items in
- run_dialog cparams items
- )
- (* Form. *)
- and form =
- with_common (
- fun cparams text height width formheight items ->
- let items = List.map (
- fun (label, y, x, item, y', x', flen, ilen) ->
- [ label; string_of_int y; string_of_int x; item;
- string_of_int y'; string_of_int x';
- string_of_int flen; string_of_int ilen ]
+ let ok = Newt.button 48 16 ok_button in
+
+ let vb =
+ if List.length entries > 10 then
+ Some (Newt.vertical_scrollbar 58 1 10
+ Newt_int.NEWT_COLORSET_WINDOW
+ Newt_int.NEWT_COLORSET_ACTCHECKBOX)
+ else
+ None in
+ let form = Newt.form vb None [] in
+ Newt.form_add_components form (List.map snd entries);
+ Newt.form_add_component form ok;
+
+ let selected =
+ let rec loop () =
+ ignore (Newt.run_form form);
+ let selected = List.filter_map (
+ fun (handle, cb) ->
+ if Newt.checkbox_get_value cb = '*' then Some handle else None
+ ) entries in
+ if force_one && selected = [] then loop ()
+ else selected
+ in
+ loop () in
+
+ Newt.pop_window ();
+
+ selected
+ )
+
+(* Display a dialog with radio buttons, return the single selected item. *)
+let select_single ?stage width title items =
+ if items = [] then failwith "select_single: no items";
+
+ with_newt (
+ fun () ->
+ open_centered_window ?stage width 20 title;
+
+ let prev = ref None in
+ let entries =
+ List.mapi (
+ fun i (label, handle) ->
+ let rb = Newt.radio_button 1 (i+1) label (!prev = None) !prev in
+ prev := Some rb;
+ (handle, rb)
) items in
- let items = List.concat items in
- let items = "--form" :: text ::
- string_of_int height :: string_of_int width ::
- string_of_int formheight :: items in
- run_dialog cparams items
- )
- in
- msgbox, yesno, inputbox, radiolist, checklist, form
-(* Print failure dialog and exit. *)
-let fail_dialog text =
- let text = "\n" ^ text ^ "\n\nIf you want to report this error, there is a shell on [ALT] [F2], log in as root with no password.\n\nPlease provide the contents of /tmp/virt-p2v.log and output of the 'dmesg' command." in
- ignore (msgbox "Error" text 17 50);
- exit 1
+ let ok = Newt.button (width-12) 16 ok_button in
+
+ let vb =
+ if List.length entries > 10 then
+ Some (Newt.vertical_scrollbar 58 1 10
+ Newt_int.NEWT_COLORSET_WINDOW
+ Newt_int.NEWT_COLORSET_ACTCHECKBOX)
+ else
+ None in
+ let form = Newt.form vb None [] in
+ Newt.form_add_components form (List.map snd entries);
+ Newt.form_add_component form ok;
+
+ let (selected, _) =
+ let rec loop () =
+ ignore (Newt.run_form form);
+ let r = Option.get !prev in
+ let r = Newt.radio_get_current r in
+ (* Now we compare 'r' to all the 'rb's in the list
+ * to see which one is selected.
+ *)
+ try
+ List.find (fun (_, rb) -> Newt.component_equals r rb) entries
+ with
+ Not_found -> loop ()
+ in
+ loop () in
+
+ Newt.pop_window ();
+
+ selected
+ )
(* Shell-safe quoting function. In fact there's one in stdlib so use it. *)
let quote = Filename.quote
(* Run a shell command and check it returns 0. *)
let sh cmd =
eprintf "sh: %s\n%!" cmd;
- if Sys.command cmd <> 0 then fail_dialog (sprintf "Command failed:\n\n%s" cmd)
+ if Sys.command cmd <> 0 then
+ failwith (sprintf (f_ "Command failed:\n\n%s") cmd)
let shfailok cmd =
eprintf "shfailok: %s\n%!" cmd;
match close_process_in chan with
| WEXITED 0 -> Some lines (* command succeeded *)
| WEXITED _ -> None (* command failed *)
- | WSIGNALED i -> failwith (sprintf "shget: command killed by signal %d" i)
- | WSTOPPED i -> failwith (sprintf "shget: command stopped by signal %d" i)
+ | WSIGNALED i ->
+ failwith (sprintf (f_ "shget: command killed by signal %d") i)
+ | WSTOPPED i ->
+ failwith (sprintf (f_ "shget: command stopped by signal %d") i)
(* Start an interactive shell. Need to juggle file descriptors a bit
* because bash write PS1 to stderr (currently directed to the logfile).
try Some ((stat path).st_kind = S_REG)
with Unix_error (ENOENT, "stat", _) -> None
-(* Useful regular expression. *)
-let whitespace = Pcre.regexp "[ \t]+"
+(*----------------------------------------------------------------------*)
+(* P2V-specific helper functions. *)
(* Generate a predictable safe name containing only letters, numbers
* and underscores. If passed a string with no letters or numbers,
let get_lvs =
let devname = Pcre.regexp "^/dev/(.+)\\(.+\\)$" in
- function () ->
+ fun () ->
match
shget "lvs --noheadings -o vg_name,lv_name,devices,lv_size"
with
| None -> []
| Some lines ->
- let lines = List.map (Pcre.split ~rex:whitespace) lines in
+ let lines = List.map Pcre.split lines in
List.map (
function
| [vg; lv; pvs; lvsize]
) pvs in
LV (vg, lv), pvs, lvsize
| line ->
- failwith ("lvs: unexpected output: " ^ String.concat "," line)
+ failwith ("lvs: " ^ s_ "unexpected output: " ^
+ String.concat "," line)
) lines
(* Get the partitions on a block device.
match lines with
| Some (sectors::_) -> Int64.of_string sectors
| Some [] | None ->
- fail_dialog (sprintf "Snapshot failed - unable to read the size in sectors of block device %s" origin_dev) in
+ failwith (sprintf (f_ "Disk snapshot failed: unable to read the size in sectors of block device %s") origin_dev) in
(* Create the snapshot origin device. Called, eg. snap_sda1_org *)
sh (sprintf "dmsetup create %s_org --table='0 %Ld snapshot-origin /dev/%s'"
(* Try to perform automatic network configuration, assuming a Fedora or
* RHEL-like root filesystem mounted on /mnt/root.
*)
-let auto_network state =
+let auto_network () =
(* Fedora gives an error if this file doesn't exist. *)
sh "touch /etc/resolv.conf";
(* NB. Lazy unmount is required because dhclient keeps its current
* directory open on /etc/sysconfig/network-scripts/
+ * (Fixed in dhcp >= 4.0.0 but be generous anyway).
*)
sh "mount -o bind /mnt/root/etc /etc";
let status = shwithstatus "/etc/init.d/network start" in
sh "umount -l /etc";
- (* Try to ping the remote host to see if this worked. *)
- shfailok ("ping -c 3 " ^ Option.map_default quote "" state.remote_host);
+ (* Try to ping the default gateway to see if this worked. *)
+ shfailok "ping -c3 `/sbin/ip route list match 0.0.0.0 | head -1 | awk '{print $3}'`";
- if state.greeting then (
- printf "\n\nDid automatic network configuration work?\n";
- printf "Hint: If not sure, there is a shell on console [ALT] [F2]\n";
+ if !config_greeting then (
+ print_endline (s_ "\n\nDid automatic network configuration work?\nHint: If not sure, there is a shell on console [ALT] [F2]");
printf " (y/n) %!";
let line = read_line () in
String.length line > 0 && (line.[0] = 'y' || line.[0] = 'Y')
status = 0
(* Configure the network statically. *)
-let static_network state =
- match state.static_network_config with
- | None -> false (* failed *)
- | Some (interface, address, netmask, gateway, nameserver) ->
- let do_cmd_or_exit cmd = if shwithstatus cmd <> 0 then raise Exit in
- try
- do_cmd_or_exit (sprintf "ifconfig %s %s netmask %s"
- (quote interface) (quote address) (quote netmask));
- do_cmd_or_exit (sprintf "route add default gw %s %s"
- (quote gateway) (quote interface));
- if nameserver <> "" then
- do_cmd_or_exit (sprintf "echo nameserver %s > /etc/resolv.conf"
- (quote nameserver));
- true (* succeeded *)
- with
- Exit -> false (* failed *)
+let static_network (interface, address, netmask, gateway, nameserver) =
+ let do_cmd_or_exit cmd = if shwithstatus cmd <> 0 then raise Exit in
+ try
+ do_cmd_or_exit (sprintf "ifconfig %s %s netmask %s"
+ (quote interface) (quote address) (quote netmask));
+ do_cmd_or_exit (sprintf "route add default gw %s %s"
+ (quote gateway) (quote interface));
+ if nameserver <> "" then
+ do_cmd_or_exit (sprintf "echo nameserver %s > /etc/resolv.conf"
+ (quote nameserver));
+ true (* succeeded *)
+ with
+ Exit -> false (* failed *)
+(* http://fabrice.bellard.free.fr/qemu/qemu-doc.html#SEC30 *)
let qemu_network () =
sh "ifconfig eth0 10.0.2.10 netmask 255.255.255.0";
sh "route add default gw 10.0.2.2 eth0";
fun dev ->
Pcre.replace ~rex:devsd ~itempl:devsd_subst dev
+(* Make an SSH connection to the remote machine, execute command.
+ * The connection remains open until you call ssh_disconnect, it
+ * times out or there is some error.
+ *
+ * NB. The command is NOT quoted.
+ *
+ * Returns a pair (file descriptor, channel), both referring to the
+ * same thing. Use whichever is more convenient.
+ *)
+let ssh_connect config cmd =
+ let cmd = sprintf "ssh%s -l %s -p %s %s %s"
+ (if config.ssh_compression then " -C" else "")
+ (quote config.ssh_username) (quote config.ssh_port) (quote config.ssh_host)
+ cmd in
+ eprintf "ssh_connect: %s\n%!" cmd;
+ let chan = open_process_out cmd in
+ descr_of_out_channel chan, chan
+
+let ssh_disconnect (_, chan) =
+ eprintf "ssh_disconnect\n%!";
+ match close_process_out chan with
+ | WEXITED 0 -> () (* OK *)
+ | WEXITED i -> failwith (sprintf (f_ "ssh: exited with error code %d") i)
+ | WSIGNALED i -> failwith (sprintf (f_ "ssh: killed by signal %d") i)
+ | WSTOPPED i -> failwith (sprintf (f_ "ssh: stopped by signal %d") i)
+
+(* Use these functions to upload a file. *)
+let ssh_start_upload config filename =
+ let cmd =
+ sprintf "cat \\> %s/%s" (quote config.ssh_directory) (quote filename) in
+ ssh_connect config cmd
+
+let ssh_finish_upload = ssh_disconnect
+
+(* Test SSH connection. *)
+let test_ssh config =
+ print_endline
+ (s_ "Testing SSH connection by listing files in remote directory ...\n");
+
+ let cmd = sprintf "/bin/ls %s" (quote config.ssh_directory) in
+ let conn = ssh_connect config cmd in
+ ssh_disconnect conn;
+
+ if !config_greeting then (
+ print_endline (s_ "\n\nDid SSH work?\nHint: If not sure, there is a shell on console [ALT] [F2]\n");
+ printf " (y/n) %!";
+ let line = read_line () in
+ String.length line > 0 && (line.[0] = 'y' || line.[0] = 'Y')
+ )
+ else
+ true
+
(* Rewrite /mnt/root/etc/fstab. *)
-let rewrite_fstab state devices_to_send =
+let rewrite_fstab () =
let filename = "/mnt/root/etc/fstab" in
if is_file filename = Some true then (
sh ("cp " ^ quote filename ^ " " ^ quote (filename ^ ".p2vsaved"));
let chan = open_in filename in
let lines = input_all_lines chan in
close_in chan;
- let lines = List.map (Pcre.split ~rex:whitespace) lines in
+ let lines = List.map Pcre.split lines in
let lines = List.map (
function
| dev :: rest when String.starts_with dev "/dev/" ->
fprintf chan "%-23s %-23s %-7s %-15s %s %s\n"
dev mountpoint fstype options freq passno
| line ->
- output_string chan (String.concat " " line)
+ output_string chan (String.concat " " line);
+ output_char chan '\n'
) lines;
close_out chan
)
-let () = Random.self_init ()
-
+(* Generate a random MAC address in the Xen-reserved space. *)
let random_mac_address () =
let random =
List.map (sprintf "%02x") (
) in
String.concat ":" ("00"::"16"::"3e"::random)
+(* Generate a random UUID. *)
let random_uuid =
let hex = "0123456789abcdef" in
fun () ->
for i = 0 to 31 do str.[i] <- hex.[Random.int 16] done;
str
+(*----------------------------------------------------------------------*)
(* Main entry point. *)
+
+(* The general plan for the main function is to operate in stages:
+ *
+ * Start-up
+ * |
+ * V
+ * Information gathering about the system
+ * | (eg. block devices, number of CPUs, etc.)
+ * V
+ * Greeting and type of transfer question
+ * |
+ * V
+ * Set up the network
+ * | (after this point we have a working network)
+ * V
+ * Set up SSH
+ * | (after this point we have a working SSH connection)
+ * V
+ * Questions about what to transfer (block devs, root fs) <--.
+ * | |
+ * V |
+ * Questions about hypervisor configuration |
+ * | |
+ * V |
+ * Verify information -------- user wants to change info ----/
+ * |
+ * V
+ * Perform transfer
+ *
+ * Prior versions of virt-p2v (the ones which used 'dialog') had support
+ * for a back button so they could go back through dialogs. I removed
+ * this because it was hard to support and not particularly useful.
+ *)
+
let rec main ttyname =
+ Random.self_init ();
+
(* Running from an init script. We don't have much of a
* login environment, so set one up.
*)
(* Log the start up time. *)
eprintf "\n\n**************************************************\n\n";
let tm = localtime (time ()) in
- eprintf "virt-p2v-ng starting up at %04d-%02d-%02d %02d:%02d:%02d\n\n%!"
+ eprintf "%s starting up at %04d-%02d-%02d %02d:%02d:%02d\n\n%!"
+ program_name
(tm.tm_year+1900) (tm.tm_mon+1) tm.tm_mday tm.tm_hour tm.tm_min tm.tm_sec;
(* Connect stdin/stdout to the tty. *)
let fd = openfile ("/dev/" ^ ttyname) [ O_RDWR ] 0 in
dup2 fd stdin;
dup2 fd stdout;
- close fd);
- printf "virt-p2v starting up ...\n%!";
+ close fd
+ );
+
+ (* Choose language early, so messages are translated. *)
+ if !config_greeting && List.length supported_langs > 1 then (
+ with_newt (
+ fun () ->
+ let lang = select_single ~stage:(s_ "Select language") 40
+ (s_ "Select language")
+ supported_langs in
+
+ putenv "LANG" lang;
+ ignore (GettextStubCompat.setlocale GettextStubCompat.LC_ALL lang)
+ )
+ );
+
+ let () = printf (f_ "%s starting up ...\n%!") program_name in
(* Disable screen blanking on tty. *)
sh "setterm -blank 0";
(* Check that the environment is a sane-looking live CD. If not, bail. *)
- if is_dir "/mnt/root" <> Some true then
- fail_dialog
- "You should only run this script from the live CD or a USB key.";
+ if not test_dialog_stages && is_dir "/mnt/root" <> Some true then
+ failwith
+ (s_ "You should only run this script from the live CD or a USB key.");
- printf "virt-p2v detecting hard drives (this may take some time) ...\n%!";
+ (* Start of the information gathering phase. *)
+ print_endline
+ (s_ "Detecting hard drives (this may take some time) ...");
(* Search for all non-removable block devices. Do this early and bail
* if we can't find anything. This is a list of strings, like "hda".
(String.concat "; "
(List.map (fun (d, b) -> sprintf "%s [%Ld]" d b) devices));
if devices = [] then
- fail_dialog "No non-removable block devices (hard disks, etc.) could be found on this machine.";
+ failwith
+ (s_ "No non-removable block devices (hard disks, etc.) could be found on this machine.");
devices in
(* Search for partitions and LVs (anything that could contain a
) all_partitions
in
- printf "virt-p2v finished detecting hard drives\n%!";
+ print_endline (s_ "Finished detecting hard drives.");
- (* Dialogs. *)
- let ask_greeting state =
- ignore (msgbox "virt-p2v" "\nWelcome to virt-p2v, a live CD for migrating a physical machine to a virtualized host.\n\nTo continue press the Return key.\n\nTo get a shell you can use [ALT] [F2] and log in as root with no password.\n\nExtra information is logged in /tmp/virt-p2v.log but this file disappears when the machine reboots." 18 50);
- Next state
- in
-
- let ask_hostname state =
- match
- inputbox "Remote host" "Remote host" 10 50
- (Option.default "" state.remote_host)
+ (* Autodetect system memory. *)
+ let system_memory =
+ (* Try to parse dmesg first to find the 'Memory:' report when
+ * the kernel booted. If available, this can give us an
+ * indication of usable RAM on this system.
+ *)
+ let dmesg = shget "dmesg" in
+ try
+ let dmesg =
+ match dmesg with Some lines -> lines | None -> raise Not_found in
+ let line =
+ List.find (fun line -> String.starts_with line "Memory: ") dmesg in
+ let subs = Pcre.exec ~pat:"k/([[:digit:]]+)k available" line in
+ let mem = Pcre.get_substring subs 1 in
+ int_of_string mem / 1024
with
- | Yes [] -> Ask_again
- | Yes (hostname::_) -> Next { state with remote_host = Some hostname }
- | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ Not_found | Failure "int_of_string" ->
+ (* 'dmesg' can't be parsed. The backup plan is to look
+ * at /proc/meminfo.
+ *)
+ let mem = shget "head -1 /proc/meminfo | awk '{print $2/1024}'" in
+ match mem with
+ | Some (mem::_) -> int_of_float (float_of_string mem)
+
+ (* For some reason even /proc/meminfo didn't work. Just
+ * assume 256 MB instead.
+ *)
+ | _ -> 256 in
- let ask_port state =
- match
- inputbox "Remote port" "Remote port" 10 50
- (Option.default "22" state.remote_port)
- with
- | Yes ([]|""::_) -> Next { state with remote_port = Some "22" }
- | Yes (port::_) -> Next { state with remote_port = Some port }
- | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ (* Autodetect system # pCPUs. *)
+ let system_nr_cpus =
+ let cpus =
+ shget "grep ^processor /proc/cpuinfo | tail -1 | awk '{print $3+1}'" in
+ match cpus with
+ | Some (cpus::_) -> int_of_string cpus
+ | _ -> 1 in
- let ask_directory state =
- let default_dir = "/var/lib/xen/images" in
- match
- inputbox "Remote directory" "Remote directory" 10 50
- (Option.default default_dir state.remote_directory)
- with
- | Yes ([]|""::_) -> Next { state with remote_directory = Some default_dir }
- | Yes (dir::_) -> Next { state with remote_directory = Some dir }
- | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ (* Greeting, type of transfer, network question stages.
+ * These are all done in newt mode.
+ *)
+ let config_transfer_type, config_network =
+ with_newt (
+ fun () ->
+ (* Greeting. *)
+ if !config_greeting then
+ message_box program_name (sprintf (f_ "Welcome to %s, a live CD for migrating a physical machine to a virtualized host.\n\nTo continue press the Return key.\n\nTo get a shell you can use [ALT] [F2] and log in as root with no password.\n\nExtra information is logged in /tmp/virt-p2v.log but this file disappears when the machine reboots.") program_name);
+
+ (* Type of transfer. *)
+ let config_transfer_type =
+ match !config_transfer_type with
+ | Some t -> t
+ | None ->
+ let items = [
+ s_ "Physical to Virtual (P2V)", P2V;
+ s_ "Virtual to Virtual (V2V)", V2V;
+ ] in
+
+ select_single ~stage:(s_ "Transfer type") 40
+ (s_ "Transfer type")
+ items in
+
+ (* Network configuration. *)
+ let config_network =
+ match !config_network with
+ | Some n -> n
+ | None ->
+ open_centered_window ~stage:(s_ "Network")
+ 60 20 (s_ "Configure network");
+
+ let autolist = Newt.listbox 4 2 4 [Newt.SCROLL] in
+ Newt.listbox_set_width autolist 52;
+
+ (* Populate the "Automatic" listbox with RHEL/Fedora
+ * root partitions found which allow us to do
+ * automatic configuration in a known way.
+ *)
+ let rec loop = function
+ | [] -> ()
+ | (partition, LinuxRoot (_, ((RHEL _|Fedora _) as distro)))
+ :: parts ->
+ let label =
+ sprintf "%s (%s)"
+ (dev_of_partition partition)
+ (string_of_linux_distro distro) in
+ ignore (Newt.listbox_append_entry autolist label partition);
+ loop parts
+ | _ :: parts -> loop parts
+ in
+ loop all_partitions;
+
+ (* If there is no suitable root partition (the listbox
+ * is empty) then disable the auto option and the listbox.
+ *)
+ let no_auto = Newt.listbox_item_count autolist = 0 in
+
+ let auto =
+ Newt.radio_button 1 1
+ (s_ "Automatic from:") (not no_auto) None in
+ let shell =
+ Newt.radio_button 1 6
+ (s_ "Start a shell") no_auto (Some auto) in
+
+ if no_auto then (
+ Newt.component_takes_focus auto false;
+ Newt.component_takes_focus
+ (Newt.component_of_listbox autolist) false
+ );
- let ask_username state =
- let default_username = "root" in
- match
- inputbox "Remote username" "Remote username for ssh access to server" 10 50
- (Option.default default_username state.remote_username)
- with
- | Yes ([]|""::_) ->
- Next { state with remote_username = Some default_username }
- | Yes (user::_) -> Next { state with remote_username = Some user }
- | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ let qemu =
+ Newt.radio_button 1 7
+ (s_ "QEMU user network") false (Some shell) in
+ let nonet =
+ Newt.radio_button 1 8
+ (s_ "Don't configure the network") false (Some qemu) in
+ let static =
+ Newt.radio_button 1 9
+ (s_ "Static configuration:") false (Some nonet) in
+
+ let label1 = Newt.label 4 10 (s_ "Interface") in
+ let entry1 = Newt.entry 16 10 (Some "eth0") 8 [] in
+ let label2 = Newt.label 4 11 (s_ "IP") in
+ let entry2 = Newt.entry 16 11 None 16 [] in
+ let label3 = Newt.label 4 12 (s_ "Netmask") in
+ let entry3 = Newt.entry 16 12 (Some "255.255.255.0") 16 [] in
+ let label4 = Newt.label 4 13 (s_ "Gateway") in
+ let entry4 = Newt.entry 16 13 None 16 [] in
+ let label5 = Newt.label 4 14 (s_ "Nameserver") in
+ let entry5 = Newt.entry 16 14 None 16 [] in
+
+ let enable_static () =
+ Newt.component_takes_focus entry1 true;
+ Newt.component_takes_focus entry2 true;
+ Newt.component_takes_focus entry3 true;
+ Newt.component_takes_focus entry4 true;
+ Newt.component_takes_focus entry5 true
+ in
+
+ let disable_static () =
+ Newt.component_takes_focus entry1 false;
+ Newt.component_takes_focus entry2 false;
+ Newt.component_takes_focus entry3 false;
+ Newt.component_takes_focus entry4 false;
+ Newt.component_takes_focus entry5 false
+ in
+
+ let enable_autolist () =
+ Newt.component_takes_focus
+ (Newt.component_of_listbox autolist) true
+ in
+ let disable_autolist () =
+ Newt.component_takes_focus
+ (Newt.component_of_listbox autolist) false
+ in
+
+ disable_static ();
+ Newt.component_add_callback auto
+ (fun () ->disable_static (); enable_autolist ());
+ Newt.component_add_callback shell
+ (fun () -> disable_static (); disable_autolist ());
+ Newt.component_add_callback qemu
+ (fun () -> disable_static (); disable_autolist ());
+ Newt.component_add_callback nonet
+ (fun () -> disable_static (); disable_autolist ());
+ Newt.component_add_callback static
+ (fun () -> enable_static (); disable_autolist ());
+
+ let ok = Newt.button 48 16 ok_button in
+
+ let form = Newt.form None None [] in
+ Newt.form_add_components form [auto;
+ Newt.component_of_listbox autolist;
+ shell;qemu;nonet;static;
+ label1;label2;label3;label4;label5;
+ entry1;entry2;entry3;entry4;entry5;
+ ok];
+
+ let n =
+ let rec loop () =
+ ignore (Newt.run_form form);
+
+ let r = Newt.radio_get_current auto in
+ if Newt.component_equals r auto then (
+ match Newt.listbox_get_current autolist with
+ | None -> loop ()
+ | Some part -> Auto part
+ )
+ else if Newt.component_equals r shell then Shell
+ else if Newt.component_equals r qemu then QEMUUserNet
+ else if Newt.component_equals r nonet then NoNetwork
+ else if Newt.component_equals r static then (
+ let interface = Newt.entry_get_value entry1 in
+ let address = Newt.entry_get_value entry2 in
+ let netmask = Newt.entry_get_value entry3 in
+ let gateway = Newt.entry_get_value entry4 in
+ let nameserver = Newt.entry_get_value entry5 in
+ if interface = "" || address = "" ||
+ netmask = "" || gateway = "" then
+ loop ()
+ else
+ Static (interface, address, netmask, gateway, nameserver)
+ )
+ else loop ()
+ in
+ loop () in
+ Newt.pop_window ();
+
+ n in
+
+ config_transfer_type, config_network
+ ) in
- let ask_network state =
- match
- radiolist "Network configuration" "Network configuration" 12 50 4 [
- "auto", "Automatic configuration", state.network = Some Auto;
- "ask", "Ask for fixed IP address and gateway",
- state.network = Some Static;
- "sh", "Configure from the shell", state.network = Some Shell;
- "qemu", "QEMU user network (for developers only)",
- state.network = Some QEMUUserNet
- ]
- with
- | Yes ("auto"::_) -> Next { state with network = Some Auto }
- | Yes ("ask"::_) -> Next { state with network = Some Static }
- | Yes ("sh"::_) -> Next { state with network = Some Shell }
- | Yes ("qemu"::_) -> Next { state with network = Some QEMUUserNet }
- | Yes _ | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ (* Try to bring up the network. *)
+ (match config_network with
+ | Shell ->
+ print_endline (s_ "Network configuration.\n\nPlease configure the network from this shell.\n\nWhen you have finished, exit the shell with ^D or exit.\n");
+ shell ()
- let ask_static_network_config state =
- let interface, address, netmask, gateway, nameserver =
- match state.static_network_config with
- | Some (a,b,c,d,e) -> a,b,c,d,e
- | None -> "eth0","","","","" in
- match
- form "Static network configuration" "Static network configuration"
- 13 50 5 [
- "Interface", 1, 0, interface, 1, 12, 8, 0;
- "Address", 2, 0, address, 2, 12, 16, 0;
- "Netmask", 3, 0, netmask, 3, 12, 16, 0;
- "Gateway", 4, 0, gateway, 4, 12, 16, 0;
- "Nameserver", 5, 0, nameserver, 5, 12, 16, 0;
- ]
- with
- | Yes (interface::address::netmask::gateway::nameserver::_) ->
- Next { state with
- static_network_config = Some (interface, address, netmask,
- gateway, nameserver) }
- | Yes _ | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ | Static (interface, address, netmask, gateway, nameserver) ->
+ print_endline (s_ "Trying static network configuration.\n");
+ if not (static_network
+ (interface, address, netmask, gateway, nameserver)) then (
+ print_endline (s_ "\nAuto-configuration failed. Starting a shell.\n\nPlease configure the network from this shell.\n\nWhen you have finished, exit the shell with ^D or exit.\n");
+ shell ()
+ )
- let ask_devices state =
- let selected_devices = Option.default [] state.devices_to_send in
- let devices = List.map (
- fun (dev, blksize) ->
- (dev,
- sprintf "/dev/%s (%.3f GB)" dev
- ((Int64.to_float blksize) /. (1024.*.1024.*.1024.)),
- List.mem dev selected_devices)
- ) all_block_devices in
- match
- checklist "Devices" "Pick devices to send" 15 50 8 devices
- with
- | Yes [] | No | Help | Error -> Ask_again
- | Yes devices -> Next { state with devices_to_send = Some devices }
- | Back -> Prev
- in
+ | Auto rootfs ->
+ print_endline
+ (s_ "Trying network auto-configuration from root filesystem ...\n");
- let ask_root state =
- let parts = List.mapi (
- fun i (part, nature) ->
- let descr =
- match nature with
- | LinuxSwap -> " (Linux swap)"
- | LinuxRoot (_, RHEL (a,b)) -> sprintf " (RHEL %d.%d root)" a b
- | LinuxRoot (_, Fedora v) -> sprintf " (Fedora %d root)" v
- | LinuxRoot (_, Debian (a,b)) -> sprintf " (Debian %d.%d root)" a b
- | LinuxRoot (_, OtherLinux) -> sprintf " (Linux root)"
- | WindowsRoot -> " (Windows C:)"
- | LinuxBoot -> " (Linux /boot)"
- | NotRoot -> " (filesystem)"
- | UnknownNature -> "" in
- (string_of_int i,
- dev_of_partition part ^ descr,
- Some part = state.root_filesystem)
- ) all_partitions in
- match
- radiolist "Root device"
- "Pick partition containing the root (/) filesystem" 18 70 9
- parts
- with
- | Yes (i::_) ->
- let (part, _) = List.nth all_partitions (int_of_string i) in
- Next { state with root_filesystem = Some part }
- | Yes [] | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ (* Mount the root filesystem read-only under /mnt/root. *)
+ sh ("mount -o ro " ^ quote (dev_of_partition rootfs) ^ " /mnt/root");
- let ask_hypervisor state =
- match
- radiolist "Hypervisor"
- "Choose hypervisor / virtualization system"
- 11 50 4 [
- "xen", "Xen", state.hypervisor = Some Xen;
- "qemu", "QEMU", state.hypervisor = Some QEMU;
- "kvm", "KVM", state.hypervisor = Some KVM;
- "other", "Other", state.hypervisor = None
- ]
- with
- | Yes ("xen"::_) -> Next { state with hypervisor = Some Xen }
- | Yes ("qemu"::_) -> Next { state with hypervisor = Some QEMU }
- | Yes ("kvm"::_) -> Next { state with hypervisor = Some KVM }
- | Yes _ -> Next { state with hypervisor = None }
- | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ if not (auto_network ()) then (
+ print_endline (s_ "\nAuto-configuration failed. Starting a shell.\n\nPlease configure the network from this shell.\n\nWhen you have finished, exit the shell with ^D or exit.\n");
+ shell ()
+ );
- let ask_architecture state =
- match
- radiolist "Architecture" "Machine architecture" 16 50 8 [
- "i386", "i386 and up (32 bit)", state.architecture = Some I386;
- "x86_64", "x86-64 (64 bit)", state.architecture = Some X86_64;
- "ia64", "Itanium IA64", state.architecture = Some IA64;
- "ppc", "PowerPC (32 bit)", state.architecture = Some PPC;
- "ppc64", "PowerPC (64 bit)", state.architecture = Some PPC64;
- "sparc", "SPARC (32 bit)", state.architecture = Some SPARC;
- "sparc64", "SPARC (64 bit)", state.architecture = Some SPARC64;
- "auto", "Auto-detect",
- state.architecture = None || state.architecture = Some UnknownArch;
- ]
- with
- | Yes ("i386" :: _) -> Next { state with architecture = Some I386 }
- | Yes ("x86_64" :: _) -> Next { state with architecture = Some X86_64 }
- | Yes ("ia64" :: _) -> Next { state with architecture = Some IA64 }
- | Yes ("ppc" :: _) -> Next { state with architecture = Some PPC }
- | Yes ("ppc64" :: _) -> Next { state with architecture = Some PPC64 }
- | Yes ("sparc" :: _) -> Next { state with architecture = Some SPARC }
- | Yes ("sparc64" :: _) -> Next { state with architecture = Some SPARC64 }
- | Yes _ -> Next { state with architecture = Some UnknownArch }
- | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ (* NB. Lazy unmount is required because dhclient keeps its current
+ * directory open on /etc/sysconfig/network-scripts/
+ *)
+ sh ("umount -l /mnt/root");
- let ask_memory state =
- match
- inputbox "Memory" "Memory (MB). Leave blank to use same as physical server."
- 10 50
- (Option.map_default string_of_int "" state.memory)
- with
- | Yes (""::_ | []) -> Next { state with memory = Some 0 }
- | Yes (mem::_) ->
- let mem = try int_of_string mem with Failure "int_of_string" -> -1 in
- if mem < 0 || (mem > 0 && mem < 64) then Ask_again
- else Next { state with memory = Some mem }
- | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ | QEMUUserNet ->
+ print_endline (s_ "Trying QEMU network configuration.\n");
+ qemu_network ()
- let ask_vcpus state =
- match
- inputbox "VCPUs" "Virtual CPUs. Leave blank to use same as physical server."
- 10 50
- (Option.map_default string_of_int "" state.vcpus)
- with
- | Yes (""::_ | []) -> Next { state with vcpus = Some 0 }
- | Yes (vcpus::_) ->
- let vcpus =
- try int_of_string vcpus with Failure "int_of_string" -> -1 in
- if vcpus < 0 then Ask_again
- else Next { state with vcpus = Some vcpus }
- | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ | NoNetwork -> (* this is easy ... *) ()
+ );
- let ask_mac_address state =
- match
- inputbox "MAC address"
- "Network MAC address. Leave blank to use a random address." 10 50
- (Option.default "" state.mac_address)
- with
- | Yes (""::_ | []) -> Next { state with mac_address = Some "" }
- | Yes (mac :: _) -> Next { state with mac_address = Some mac }
- | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ (* SSH configuration phase. *)
+ let config_ssh =
+ with_newt (
+ fun () ->
+ match !config_ssh with
+ | Some c -> c
+ | None ->
+ (* Query the user for SSH configuration. *)
+ open_centered_window ~stage:(s_ "SSH configuration")
+ 60 20 (s_ "SSH configuration");
+
+ let label1 = Newt.label 1 1 (s_ "Remote host") in
+ let host = Newt.entry 20 1 None 36 [] in
+ let label2 = Newt.label 1 2 (s_ "Remote port") in
+ let port = Newt.entry 20 2 (Some "22") 6 [] in
+ let label3 = Newt.label 1 3 (s_ "Remote directory") in
+ let dir = Newt.entry 20 3 (Some "/var/lib/xen/images") 36 [] in
+ let label4 = Newt.label 1 4 (s_ "SSH username") in
+ let user = Newt.entry 20 4 (Some "root") 16 [] in
+ (*
+ There's no sensible way to support this for SSH:
+ let label5 = Newt.label 1 5 (s_ "SSH password") in
+ let pass = Newt.entry 20 5 None 16 [Newt.PASSWORD] in
+ *)
+
+ let compr =
+ Newt.checkbox 16 7 (s_ "Use SSH compression (not good for LANs)")
+ ' ' None in
+
+ let check =
+ Newt.checkbox 16 9 (s_ "Test SSH connection") '*' None in
+
+ let ok = Newt.button 48 16 ok_button in
+
+ let form = Newt.form None None [] in
+ Newt.form_add_components form [label1;label2;label3;label4;
+ host;port;dir;user;
+ compr;check;
+ ok];
+
+ let c =
+ let rec loop () =
+ ignore (Newt.run_form form);
+ let host = Newt.entry_get_value host in
+ let port = Newt.entry_get_value port in
+ let dir = Newt.entry_get_value dir in
+ let user = Newt.entry_get_value user in
+ let compr = Newt.checkbox_get_value compr = '*' in
+ let check = Newt.checkbox_get_value check = '*' in
+ if host <> "" && port <> "" && user <> "" then
+ { ssh_host = host; ssh_port = port; ssh_directory = dir;
+ ssh_username = user;
+ ssh_compression = compr;
+ ssh_check = check; }
+ else
+ loop ()
+ in
+ loop () in
- let ask_compression state =
- match
- radiolist "Network compression" "Enable network compression" 10 50 2 [
- "yes", "Yes, compress network traffic", state.compression <> Some false;
- "no", "No, don't compress", state.compression = Some false
- ]
- with
- | Yes ("no"::_) -> Next { state with compression = Some false }
- | Yes _ -> Next { state with compression = Some true }
- | No | Help | Error -> Ask_again
- | Back -> Prev
- in
+ Newt.pop_window ();
+ c
+ ) in
- let ask_verify state =
- match
- yesno "Verify and proceed"
- (sprintf "\nPlease verify the settings below and click [OK] to proceed, or the [Back] button to return to a previous step.
-
-Host:port: %s : %s
-Directory: %s
-Network: %s
-Send devices: %s
-Root (/) dev: %s
-Hypervisor: %s
-Architecture: %s
-Memory: %s
-VCPUs: %s
-MAC address: %s
-Compression: %b"
- (Option.default "" state.remote_host)
- (Option.default "" state.remote_port)
- (Option.default "" state.remote_directory)
- (match state.network with
- | Some Auto -> "Auto-configure" | Some Shell -> "Shell"
- | Some Static -> "Static" | Some QEMUUserNet -> "QEMU user net"
- | None -> "")
- (String.concat "," (Option.default [] state.devices_to_send))
- (Option.map_default dev_of_partition "" state.root_filesystem)
- (match state.hypervisor with
- | Some Xen -> "Xen" | Some QEMU -> "QEMU" | Some KVM -> "KVM"
- | None -> "Other / not set")
- (match state.architecture with
- | Some UnknownArch -> "Auto-detect"
- | Some arch -> string_of_architecture arch | None -> "")
- (match state.memory with
- | Some 0 -> "Same as physical"
- | Some mem -> string_of_int mem ^ " MB" | None -> "")
- (match state.vcpus with
- | Some 0 -> "Same as physical"
- | Some vcpus -> string_of_int vcpus | None -> "")
- (match state.mac_address with
- | Some "" -> "Random" | Some mac -> mac | None -> "")
- (Option.default true state.compression)
- )
- 21 50
- with
- | Yes _ -> Next state
- | Back -> Prev
- | No | Help | Error -> Ask_again
- in
+ (* If asked, check the SSH connection. *)
+ if config_ssh.ssh_check then
+ if not (test_ssh config_ssh) then
+ failwith (s_ "SSH configuration failed");
+
+ (* Devices and root partition and target configuration selection stage. *)
+ let config_devices_to_send, config_root_filesystem, config_target =
+ with_newt (
+ fun () ->
+ let config_devices_to_send =
+ match !config_devices_to_send with
+ | Some ds -> ds
+ | None ->
+ let items = List.map (
+ fun (dev, size) ->
+ let label =
+ sprintf "/dev/%s (%.3f GB)" dev
+ ((Int64.to_float size) /. (1024.*.1024.*.1024.)) in
+ (label, dev, true)
+ ) all_block_devices in
+
+ select_multiple ~stage:(s_ "Block devices")
+ ~force_one:true 60
+ (s_ "Select block devices to send")
+ items in
+
+ let config_root_filesystem =
+ match !config_root_filesystem with
+ | Some fs -> fs
+ | None ->
+ let items = List.map (
+ fun (part, nature) ->
+ let label =
+ sprintf "%s %s" (dev_of_partition part)
+ (string_of_nature nature) in
+ (label, part)
+ ) all_partitions in
+
+ select_single ~stage:(s_ "Root filesystem") 60
+ (s_ "Select root filesystem")
+ items in
+
+ let config_target =
+ match !config_target with
+ | Some t -> t
+ | None ->
+ open_centered_window ~stage:(s_ "Target system") 40 20
+ (s_ "Configure target system");
+
+ let hvlabel = Newt.label 1 1 (s_ "Hypervisor:") in
+ let hvlistbox = Newt.listbox 16 1 4 [Newt.SCROLL] in
+ Newt.listbox_append_entry hvlistbox "Xen" (Some Xen);
+ Newt.listbox_append_entry hvlistbox "QEMU" (Some QEMU);
+ Newt.listbox_append_entry hvlistbox "KVM" (Some KVM);
+ Newt.listbox_append_entry hvlistbox "Other" None;
+
+ let archlabel = Newt.label 1 5 (s_ "Architecture:") in
+ let archlistbox = Newt.listbox 16 5 4 [Newt.SCROLL] in
+ Newt.listbox_append_entry archlistbox "i386" I386;
+ Newt.listbox_append_entry archlistbox
+ "x86-64 (64-bit x86)" X86_64;
+ Newt.listbox_append_entry archlistbox "IA64 (Itanium)" IA64;
+ Newt.listbox_append_entry archlistbox "PowerPC 32-bit" PPC;
+ Newt.listbox_append_entry archlistbox "PowerPC 64-bit" PPC64;
+ Newt.listbox_append_entry archlistbox "SPARC 32-bit" SPARC;
+ Newt.listbox_append_entry archlistbox "SPARC 64-bit" SPARC64;
+ Newt.listbox_append_entry archlistbox "Unknown/other" UnknownArch;
+
+ (* Get the architecture of the selected root filesystem.
+ * If not known, default to UnknownArch.
+ *)
+ Newt.listbox_set_current_by_key archlistbox UnknownArch;
+ (try
+ match List.assoc config_root_filesystem all_partitions with
+ | LinuxRoot (arch, _) ->
+ Newt.listbox_set_current_by_key archlistbox arch
+ | _ -> ()
+ with
+ Not_found -> ());
+
+ let memlabel = Newt.label 1 9 (s_ "Memory (MB):") in
+ let mementry = Newt.entry 16 9
+ (Some (string_of_int system_memory)) 8 [] in
+ let cpulabel = Newt.label 1 10 (s_ "CPUs:") in
+ let cpuentry = Newt.entry 16 10
+ (Some (string_of_int system_nr_cpus)) 4 [] in
+ let maclabel = Newt.label 1 11 (s_ "MAC addr:") in
+ let macentry = Newt.entry 16 11 None 20 [] in
+ let maclabel2 =
+ Newt.label 1 12 (s_ "(leave MAC blank for random)") in
+
+ let libvirtd =
+ Newt.checkbox 12 14 (s_ "Use remote libvirtd") '*' None in
+
+ let ok = Newt.button 28 16 ok_button in
+
+ let form = Newt.form None None [] in
+ Newt.form_add_components form
+ [hvlabel; Newt.component_of_listbox hvlistbox;
+ archlabel; Newt.component_of_listbox archlistbox;
+ memlabel; mementry;
+ cpulabel; cpuentry;
+ maclabel; macentry; maclabel2;
+ libvirtd;
+ ok];
+
+ let c =
+ let rec loop () =
+ ignore (Newt.run_form form);
+ try
+ let hv = Newt.listbox_get_current hvlistbox in
+ let arch = Newt.listbox_get_current archlistbox in
+ let mem = int_of_string (Newt.entry_get_value mementry) in
+ let cpus = int_of_string (Newt.entry_get_value cpuentry) in
+ let mac = Newt.entry_get_value macentry in
+ let libvirtd = Newt.checkbox_get_value libvirtd = '*' in
+ if hv <> None && arch <> None && mem >= 0 && cpus >= 0
+ then
+ { tgt_hypervisor = Option.get hv;
+ tgt_architecture = Option.get arch;
+ tgt_memory = mem; tgt_vcpus = cpus;
+ tgt_mac_address =
+ if mac <> "" then mac else random_mac_address ();
+ tgt_libvirtd = libvirtd }
+ else
+ loop ()
+ with
+ Not_found | Failure "int_of_string" -> loop ()
+ in
+ loop () in
- (* This is the list of dialogs, in order. The user can go forwards or
- * backwards through them.
- *
- * The second parameter in each tuple is true if we need to skip
- * this dialog statically (info already supplied in 'defaults' above).
- *
- * The third parameter in each tuple is a function that tests whether
- * this dialog should be skipped, given other parts of the current state.
+ Newt.pop_window ();
+
+ c in
+
+ config_devices_to_send, config_root_filesystem, config_target
+ ) in
+
+ (* If architecture is set to UnknownArch, then assume the same
+ * architecture as the live CD.
*)
- let dlgs =
- let dont_skip _ = false in
- [|
- ask_greeting, not defaults.greeting, dont_skip;
- ask_hostname, defaults.remote_host <> None, dont_skip;
- ask_port, defaults.remote_port <> None, dont_skip;
- ask_directory, defaults.remote_directory <> None, dont_skip;
- ask_username, defaults.remote_username <> None, dont_skip;
- ask_network, defaults.network <> None, dont_skip;
- ask_static_network_config,
- defaults.static_network_config <> None,
- (function { network = Some Static } -> false | _ -> true);
- ask_devices, defaults.devices_to_send <> None, dont_skip;
- ask_root, defaults.root_filesystem <> None, dont_skip;
- ask_hypervisor, defaults.hypervisor <> None, dont_skip;
- ask_architecture, defaults.architecture <> None, dont_skip;
- ask_memory, defaults.memory <> None, dont_skip;
- ask_vcpus, defaults.vcpus <> None, dont_skip;
- ask_mac_address, defaults.mac_address <> None, dont_skip;
- ask_compression, defaults.compression <> None, dont_skip;
- ask_verify, not defaults.greeting, dont_skip;
- |] in
-
- (* Loop through the dialogs until we reach the end. *)
- let rec loop ?(back=false) posn state =
- eprintf "dialog loop: posn = %d, back = %b\n%!" posn back;
- if posn >= Array.length dlgs then state (* Finished all dialogs. *)
- else if posn < 0 then loop 0 state
- else (
- let dlg, skip_static, skip_dynamic = dlgs.(posn) in
- if skip_static || skip_dynamic state then
- (* Skip this dialog. *)
- loop ~back (if back then posn-1 else posn+1) state
- else (
- (* Run dialog. *)
- match dlg state with
- | Next new_state -> loop (posn+1) new_state (* Forwards. *)
- | Ask_again -> loop posn state (* Repeat the question. *)
- | Prev -> loop ~back:true (posn-1) state (* Backwards / back button. *)
- )
- )
- in
- let state = loop 0 defaults in
+ let config_target =
+ match config_target.tgt_architecture with
+ | UnknownArch ->
+ let arch = shget "uname -m" in
+ let arch =
+ match arch with
+ | Some (arch :: _) -> architecture_of_string arch
+ | _ -> I386 (* probably wrong XXX *) in
+ { config_target with tgt_architecture = arch }
+ | _ -> config_target in
+
+ (* Try to get the capabilities from the remote machine. If we fail
+ * it doesn't matter too much.
+ *)
+ let caps_os_type, caps_emulator, caps_loader, caps_machine =
+ try
+ if not config_target.tgt_libvirtd then raise Not_found;
+
+ let proto, path =
+ match config_target.tgt_hypervisor with
+ | Some Xen -> "xen", "/"
+ | Some (QEMU|KVM) -> "qemu", "/system"
+ | None -> raise Not_found in
+ let name =
+ sprintf "%s+ssh://%s@%s:%s%s"
+ proto config_ssh.ssh_username
+ config_ssh.ssh_host config_ssh.ssh_port path in
+ eprintf "capabilities URI = %S\n%!" name;
+
+ print_endline (s_ "Try to fetch remote hypervisor capabilities ...\n");
+
+ let conn = Libvirt.Connect.connect_readonly ~name () in
+ let caps = Libvirt.Connect.get_capabilities conn in
+ Libvirt.Connect.close conn;
+
+ (* Turn it into XML data. *)
+ let caps = Xml.parse_string caps in
+ eprintf "capabilities:\n%s\n%!" (Xml.to_string_fmt caps);
+
+ (* We're looking for a guest with <os_type>hvm</os_type>
+ * and <arch name="target-arch">... Later when we can
+ * install PV drivers automatically, we will want to look
+ * for paravirt guest types too.
+ *)
+ let guests = children_with_name "guest" caps in
+ let guests =
+ List.filter (xml_has_pcdata_child "os_type" "hvm") guests in
+ let arch_str = string_of_architecture config_target.tgt_architecture in
+ let guests =
+ List.filter (
+ xml_has_child_matching (
+ function
+ | Xml.Element (n, attribs, _)
+ when n = "arch"
+ && List.exists (
+ fun (n, a) ->
+ n = "name" &&
+ (* deal with i386 vs i686 pestilence *)
+ architecture_of_string a = config_target.tgt_architecture
+ ) attribs
+ -> true
+ | _ -> false
+ )
+ ) guests in
+
+ (* In theory at this point we only have a single guest type
+ * remaining. It might be that we have _zero_ available
+ * guest types, which indicates probably an unsupported
+ * capability of the remote hypervisor (or just that one of
+ * many parsing or heuristics failed). It might be that
+ * we have > 1 available guest types, which indicates some
+ * feature we don't know about.
+ *)
+ let len = List.length guests in
+ if len = 0 then (
+ message_box (s_ "Warning")
+ (sprintf (f_ "Remote hypervisor claims not to support fully virtualized %s guests.\n\nContinuing anyway.\n\n%!") arch_str);
+ raise Not_found
+ );
+
+ if len > 1 then (
+ message_box (s_ "Note")
+ (sprintf (f_ "Remote hypervisor supports multiple types of fully virtualized %s guests.\n\nPlease help further development of libvirt and virt-p2v by sending the file /tmp/virt-p2v.log back to the developers. See the main virt-p2v website for contact details.") arch_str)
+ );
+
+ let guest = List.hd guests in
+
+ let os_type =
+ try Some (find_pcdata_child "os_type" guest)
+ with Not_found -> None in
+ let arch_section = find_child_with_name "arch" guest in
+ let emulator =
+ try Some (find_pcdata_child "emulator" arch_section)
+ with Not_found -> None in
+ let loader =
+ try Some (find_pcdata_child "loader" arch_section)
+ with Not_found -> None in
+ let machine =
+ try Some (find_pcdata_child "machine" arch_section)
+ with Not_found -> None in
+
+ os_type, emulator, loader, machine
+ with
+ | Not_found -> None, None, None, None
+ | Xml.Error err ->
+ eprintf "XML error: %s\n%!" (Xml.error err);
+ None, None, None, None
+ | Xml.Not_element _ | Xml.Not_pcdata _ | Xml.No_attribute _ ->
+ (* If these occur, need to add some more debugging. *)
+ eprintf "XML error when parsing capabilities\n%!";
+ None, None, None, None
+ | Libvirt.Virterror err ->
+ eprintf "libvirt error: %s\n%!" (Libvirt.Virterror.to_string err);
+ None, None, None, None
+ | Invalid_argument str ->
+ eprintf "libvirt error: %s\n%!" str;
+ None, None, None, None in
+
+ (* In test mode, exit here before we do Bad Things to the developer's
+ * hard disk.
+ *)
+ if test_dialog_stages then exit 1;
- eprintf "finished dialog loop\n%!";
+ print_endline (s_ "Performing LVM snapshots ...\n");
(* Switch LVM config. *)
sh "vgchange -a n";
sh "rm -f /etc/lvm.new/cache/.cache";
(* Snapshot the block devices to send. *)
- let devices_to_send = Option.get state.devices_to_send in
- let devices_to_send =
+ let config_devices_to_send =
List.map (
fun origin_dev ->
let snapshot_dev = snapshot_name origin_dev in
snapshot origin_dev snapshot_dev;
(origin_dev, snapshot_dev)
- ) devices_to_send in
+ ) config_devices_to_send in
(* Run kpartx on the snapshots. *)
List.iter (
fun (origin, snapshot) ->
shfailok ("kpartx -a " ^ quote ("/dev/mapper/" ^ snapshot))
- ) devices_to_send;
+ ) config_devices_to_send;
(* Rescan for LVs. *)
sh "vgscan";
sh "vgchange -a y";
(* Mount the root filesystem under /mnt/root. *)
- let root_filesystem = Option.get state.root_filesystem in
- (match root_filesystem with
+ (match config_root_filesystem with
| Part (dev, partnum) ->
let dev = dev ^ partnum in
let snapshot_dev = snapshot_name dev in
sh ("mount " ^ quote ("/dev/" ^ vg ^ "/" ^ lv) ^ " /mnt/root")
);
- (* See if we can do network configuration. *)
- let network = Option.get state.network in
- (match network with
- | Shell ->
- printf "Network configuration.\n\n";
- printf "Please configure the network from this shell.\n\n";
- printf "When you have finished, exit the shell with ^D or exit.\n\n%!";
- shell ()
-
- | Static ->
- printf "Trying static network configuration.\n\n%!";
- if not (static_network state) then (
- printf "\nAuto-configuration failed. Starting a shell.\n\n";
- printf "Please configure the network from this shell.\n\n";
- printf "When you have finished, exit the shell with ^D or exit.\n\n";
- shell ()
- )
-
- | Auto ->
- printf
- "Trying network auto-configuration from root filesystem ...\n\n%!";
- if not (auto_network state) then (
- printf "\nAuto-configuration failed. Starting a shell.\n\n";
- printf "Please configure the network from this shell.\n\n";
- printf "When you have finished, exit the shell with ^D or exit.\n\n";
- shell ()
- )
- | QEMUUserNet ->
- printf "Trying QEMU network configuration.\n\n%!";
- qemu_network ()
- );
-
(* Work out what devices will be called at the remote end. *)
- let devices_to_send = List.map (
+ let config_devices_to_send = List.map (
fun (origin_dev, snapshot_dev) ->
let remote_dev = remote_of_origin_dev origin_dev in
(origin_dev, snapshot_dev, remote_dev)
- ) devices_to_send in
+ ) config_devices_to_send in
(* Modify files on the root filesystem. *)
- rewrite_fstab state devices_to_send;
+ rewrite_fstab ();
(* XXX Other files to rewrite? *)
(* Unmount the root filesystem and sync disks. *)
sh "umount /mnt/root";
sh "sync"; (* Ugh, should be in stdlib. *)
- (* Get architecture of root filesystem, detected previously. *)
- let system_architecture =
- try
- (match List.assoc root_filesystem all_partitions with
- | LinuxRoot (arch, _) -> arch
- | _ -> raise Not_found
- )
- with
- Not_found ->
- (* None was detected before, so assume same as live CD. *)
- let arch = shget "uname -m" in
- match arch with
- | Some (("i386"|"i486"|"i586"|"i686")::_) -> I386
- | Some ("x86_64"::_) -> X86_64
- | Some ("ia64"::_) -> IA64
- | _ -> I386 (* probably wrong XXX *) in
-
- (* Autodetect system memory. *)
- let system_memory =
- let mem = shget "head -1 /proc/meminfo | awk '{print $2/1024}'" in
- match mem with
- | Some (mem::_) -> int_of_float (float_of_string mem)
- | _ -> 256 in
-
- (* Autodetect system # pCPUs. *)
- let system_nr_cpus =
- let cpus =
- shget "grep ^processor /proc/cpuinfo | tail -1 | awk '{print $3+1}'" in
- match cpus with
- | Some (cpus::_) -> int_of_string cpus
- | _ -> 1 in
-
- let remote_host = Option.get state.remote_host in
- let remote_port = Option.get state.remote_port in
- let remote_directory = Option.get state.remote_directory in
- let remote_username = Option.get state.remote_username in
-
- (* Functions to connect and disconnect from the remote system. *)
- let do_connect remote_name _ =
- let cmd = sprintf "ssh%s -l %s -p %s %s \"cat > %s/%s\""
- (if state.compression = Some false then "" else " -C")
- (quote remote_username) (quote remote_port) (quote remote_host)
- (quote remote_directory) (quote remote_name) in
- eprintf "connect: %s\n%!" cmd;
- let chan = open_process_out cmd in
- descr_of_out_channel chan, chan
- in
- let do_disconnect (_, chan) =
- match close_process_out chan with
- | WEXITED 0 -> () (* OK *)
- | WEXITED i -> failwith (sprintf "ssh: exited with error code %d" i)
- | WSIGNALED i -> failwith (sprintf "ssh: killed by signal %d" i)
- | WSTOPPED i -> failwith (sprintf "ssh: stopped by signal %d" i)
- in
-
(* XXX This is using the hostname derived from network configuration
* above. We might want to ask the user to choose.
*)
"p2v-" ^ hostname ^ "-" ^ date in
(* Work out what the image filenames will be at the remote end. *)
- let devices_to_send = List.map (
+ let config_devices_to_send = List.map (
fun (origin_dev, snapshot_dev, remote_dev) ->
let remote_name = basename ^ "-" ^ remote_dev ^ ".img" in
(origin_dev, snapshot_dev, remote_dev, remote_name)
- ) devices_to_send in
+ ) config_devices_to_send in
(* Write a configuration file. Not sure if this is any better than
* just 'sprintf-ing' bits of XML text together, but at least we will
* always get well-formed XML.
*
- * XXX For some of the stuff here we really should do a
- * virConnectGetCapabilities call to the remote host first.
- *
* XXX There is a case for using virt-install to generate this XML.
* When we start to incorporate libvirt access & storage API this
* needs to be rethought.
*)
let conf_filename = basename ^ ".conf" in
- let architecture =
- match state.architecture with
- | Some UnknownArch | None -> system_architecture
- | Some arch -> arch in
- let memory =
- match state.memory with
- | Some 0 | None -> system_memory
- | Some memory -> memory in
- let vcpus =
- match state.vcpus with
- | Some 0 | None -> system_nr_cpus
- | Some n -> n in
- let mac_address =
- match state.mac_address with
- | Some "" | None -> random_mac_address ()
- | Some mac -> mac in
-
let xml =
(* Shortcut to make "<name>value</name>". *)
let leaf name value = Xml.Element (name, [], [Xml.PCData value]) in
(* ... and the _other_ sort of leaf (god I hate XML). *)
let tleaf name attribs = Xml.Element (name, attribs, []) in
+ let arch_str =
+ string_of_architecture config_target.tgt_architecture in
+ let arch_wordsize =
+ wordsize_of_architecture config_target.tgt_architecture in
+
(* Standard stuff for every domain. *)
let name = leaf "name" hostname in
let uuid = leaf "uuid" (random_uuid ()) in
- let maxmem = leaf "maxmem" (string_of_int (memory * 1024)) in
- let memory = leaf "memory" (string_of_int (memory * 1024)) in
- let vcpu = leaf "vcpu" (string_of_int vcpus) in
+ let maxmem, memory =
+ let m = string_of_int (config_target.tgt_memory * 1024) in
+ leaf "maxmem" m, leaf "memory" m in
+ let vcpu = leaf "vcpu" (string_of_int config_target.tgt_vcpus) in
(* Top-level stuff which differs for each HV type (isn't this supposed
* to be portable ...)
*)
let extras =
- match state.hypervisor with
+ (* Use capabilities for os_type, etc. else use some good guesses. *)
+ let os_type = Option.default "hvm" caps_os_type in
+ let machine = Option.default "pc" caps_machine in
+ let loader = Option.default "/usr/lib/xen/boot/hvmloader" caps_loader in
+
+ match config_target.tgt_hypervisor with
| Some Xen ->
[Xml.Element ("os", [],
- [leaf "type" "hvm";
- leaf "loader" "/usr/lib/xen/boot/hvmloader";
+ [leaf "type" os_type;
+ leaf "loader" loader;
tleaf "boot" ["dev", "hd"]]);
Xml.Element ("features", [],
[tleaf "pae" [];
tleaf "apic" []]);
tleaf "clock" ["sync", "localtime"]]
| Some KVM ->
- [Xml.Element ("os", [], [leaf "type" "hvm"]);
+ [Xml.Element ("os", [], [leaf "type" os_type]);
tleaf "clock" ["sync", "localtime"]]
| Some QEMU ->
[Xml.Element ("os", [],
[Xml.Element ("type",
- ["arch",
- string_of_architecture architecture;
- "machine","pc"],
- [Xml.PCData "hvm"]);
+ ["arch", arch_str;
+ "machine", machine],
+ [Xml.PCData os_type]);
tleaf "boot" ["dev", "hd"]])]
| None ->
[] in
(* <devices> section. *)
let devices =
let emulator =
- match state.hypervisor with
- | Some Xen ->
- [leaf "emulator" "/usr/lib64/xen/bin/qemu-dm"] (* XXX lib64? *)
- | Some QEMU ->
- [leaf "emulator" "/usr/bin/qemu"]
- | Some KVM ->
- [leaf "emulator" "/usr/bin/qemu-kvm"]
+ match caps_emulator with
+ (* Use the emulator from the libvirt capabilities. *)
+ | Some s -> [leaf "emulator" s]
| None ->
- [] in
+ (* If we don't have libvirt capabilities, best guess. *)
+ match config_target.tgt_hypervisor with
+ | Some Xen ->
+ [leaf "emulator"
+ (if arch_wordsize = W64 then "/usr/lib64/xen/bin/qemu-dm"
+ else "/usr/lib/xen/bin/qemu-dm")]
+ | Some QEMU ->
+ [leaf "emulator" "/usr/bin/qemu"]
+ | Some KVM ->
+ [leaf "emulator" "/usr/bin/qemu-kvm"]
+ | None ->
+ [] in
let interface =
Xml.Element ("interface", ["type", "user"],
- [tleaf "mac" ["address", mac_address]]) in
+ [tleaf "mac" ["address",
+ config_target.tgt_mac_address]]) in
(* XXX should have an option for Xen bridging:
Xml.Element (
"interface", ["type","bridge"],
Xml.Element (
"disk", ["type", "file";
"device", "disk"],
- [tleaf "source" ["file", remote_directory ^ "/" ^ remote_name];
+ [tleaf "source" ["file",
+ config_ssh.ssh_directory ^ "/" ^ remote_name];
tleaf "target" ["dev", remote_dev]]
)
- ) devices_to_send in
+ ) config_devices_to_send in
Xml.Element (
"devices", [],
(* Put it all together in <domain type='foo'>. *)
Xml.Element (
"domain",
- (match state.hypervisor with
+ (match config_target.tgt_hypervisor with
| Some Xen -> ["type", "xen"]
| Some QEMU -> ["type", "qemu"]
| Some KVM -> ["type", "kvm"]
let xml = Xml.to_string_fmt xml in
let conn_arg =
- match state.hypervisor with
+ match config_target.tgt_hypervisor with
| Some Xen | None -> ""
| Some QEMU | Some KVM -> " -c qemu:///system" in
- let xml = sprintf "\
+ let xml = sprintf (f_ "\
<!--
- This is a libvirt configuration file.
+ This is an automatically generated libvirt configuration file.
+ It was written by the %s program.
+
+ Please check the values in this configuration file carefully,
+ particularly maxmem, memory, vcpu and any paths.
To start the domain, do:
virsh%s define %s
virsh%s start %s
--->\n\n" conn_arg conf_filename conn_arg hostname ^ xml in
+-->\n\n") program_name conn_arg conf_filename conn_arg hostname
+ ^ xml
+ ^ "\n" in
let xml_len = String.length xml in
eprintf "length of configuration file is %d bytes\n%!" xml_len;
- let (sock,_) as conn = do_connect conf_filename (Int64.of_int xml_len) in
+ print_endline (s_ "\nWriting configuration file ...\n");
+
+ let (sock,_) as conn = ssh_start_upload config_ssh conf_filename in
(* In OCaml this actually loops calling write(2) *)
ignore (write sock xml 0 xml_len);
- do_disconnect conn in
+ ssh_finish_upload conn in
(* Send the device snapshots to the remote host. *)
(* XXX This code should be made more robust against both network
try List.assoc origin_dev all_block_devices
with Not_found -> assert false (* internal error *) in
- printf "Sending /dev/%s (%.3f GB) to remote machine\n%!" origin_dev
- ((Int64.to_float size) /. (1024.*.1024.*.1024.));
+ let () =
+ printf (f_ "\nSending /dev/%s (%.3f GB) to remote machine\n\n%!")
+ origin_dev ((Int64.to_float size) /. (1024.*.1024.*.1024.)) in
(* Open the snapshot device. *)
let fd = openfile ("/dev/mapper/" ^ snapshot_dev) [O_RDONLY] 0 in
(* Now connect. *)
- let (sock,_) as conn = do_connect remote_name size in
+ let (sock,_) as conn = ssh_start_upload config_ssh remote_name in
(* Copy the data. *)
+ let spinners = "|/-\\" (* "Oo" *) in
let bufsize = 1024 * 1024 in
let buffer = String.create bufsize in
let start = gettimeofday () in
- let rec copy bytes_sent last_printed_at =
+ let rec copy bytes_sent last_printed_at spinner =
let n = read fd buffer 0 bufsize in
if n > 0 then (
let n' = write sock buffer 0 n in
if n <> n' then assert false; (* never, according to the manual *)
let bytes_sent = Int64.add bytes_sent (Int64.of_int n) in
- let last_printed_at =
+ let last_printed_at, spinner =
let now = gettimeofday () in
(* Print progress every few seconds. *)
- if now -. last_printed_at > 5. then (
+ if now -. last_printed_at > 2. then (
let elapsed = Int64.to_float bytes_sent /. Int64.to_float size in
let secs_elapsed = now -. start in
- printf "%.0f%% @ %.1f Mbps"
- (100. *. elapsed)
+ printf "%.0f%% %c %.1f Mbps"
+ (100. *. elapsed) spinners.[spinner]
(Int64.to_float bytes_sent/.secs_elapsed/.1_000_000. *. 8.);
(* After 60 seconds has elapsed, start printing estimates. *)
if secs_elapsed >= 60. then (
let remaining = 1. -. elapsed in
let secs_remaining = (remaining /. elapsed) *. secs_elapsed in
if secs_remaining > 120. then
- printf " (about %.0f minutes remaining)" (secs_remaining/.60.)
+ printf (f_ " (about %.0f minutes remaining)")
+ (secs_remaining/.60.)
else
- printf " (about %.0f seconds remaining)"
+ printf (f_ " (about %.0f seconds remaining)")
secs_remaining
);
printf " \r%!";
- now
+ let spinner = (spinner + 1) mod String.length spinners in
+ now, spinner
)
- else last_printed_at in
+ else last_printed_at, spinner in
- copy bytes_sent last_printed_at
+ copy bytes_sent last_printed_at spinner
)
in
- copy 0L start;
+ copy 0L start 0;
printf "\n\n%!"; (* because of the messages printed above *)
(* Disconnect. *)
- do_disconnect conn
- ) devices_to_send;
+ ssh_finish_upload conn
+ ) config_devices_to_send;
(*printf "\n\nPress any key ...\n%!"; ignore (read_line ());*)
(* Clean up and reboot. *)
ignore (
- msgbox "virt-p2v completed"
- (sprintf "\nThe physical to virtual migration is complete.\n\nPlease verify the disk image(s) and configuration file on the remote host, and then start up the virtual machine by doing:\n\ncd %s\nvirsh define %s\n\nWhen you press [OK] this machine will reboot."
- remote_directory conf_filename)
- 17 50
+ message_box (sprintf (f_ "%s has finished") program_name)
+ (sprintf (f_ "\nThe physical to virtual migration is complete.\n\nPlease verify the disk image(s) and configuration file on the remote host, and then start up the virtual machine by doing:\n\ncd %s\nvirsh define %s\n\nWhen you press [OK] this machine will reboot.")
+ config_ssh.ssh_directory conf_filename)
);
shfailok "eject";
shfailok "reboot";
+
exit 0
+(*----------------------------------------------------------------------*)
+
let usage () =
- eprintf "usage: virt-p2v [--test] [ttyname]\n%!";
+ let () = eprintf (f_ "usage: virt-p2v [--test] [ttyname]\n%!") in
exit 2
(* Make sure that exceptions from 'main' get printed out on stdout
*)
let handle_exn f arg =
try f arg
- with exn -> print_endline (Printexc.to_string exn); raise exn
+ with exn ->
+ print_endline (Printexc.to_string exn);
+ raise exn
(* Test harness for the Makefile. The Makefile invokes this script as
* 'virt-p2v --test' just to check it compiles. When it is running