This is equivalent to the qemu parameter
C<-drive file=filename,cache=off,if=...>.
+
C<cache=off> is omitted in cases where it is not supported by
the underlying filesystem.
+C<if=...> is set at compile time by the configuration option
+C<./configure --with-drive-if=...>. In the rare case where you
+might need to change this at run time, use C<guestfs_add_drive_with_if>
+or C<guestfs_add_drive_ro_with_if>.
+
Note that this call checks for the existence of C<filename>. This
stops you from specifying other types of drive which are supported
by qemu such as C<nbd:> and C<http:> URLs. To specify those, use
This is equivalent to the qemu parameter C<-cdrom filename>.
-Note that this call checks for the existence of C<filename>. This
+Notes:
+
+=over 4
+
+=item *
+
+This call checks for the existence of C<filename>. This
stops you from specifying other types of drive which are supported
by qemu such as C<nbd:> and C<http:> URLs. To specify those, use
-the general C<guestfs_config> call instead.");
+the general C<guestfs_config> call instead.
+
+=item *
+
+If you just want to add an ISO file (often you use this as an
+efficient way to transfer large files into the guest), then you
+should probably use C<guestfs_add_drive_ro> instead.
+
+=back");
("add_drive_ro", (RErr, [String "filename"]), -1, [FishAlias "add-ro"],
[],
This is equivalent to the qemu parameter
C<-drive file=filename,snapshot=on,if=...>.
+C<if=...> is set at compile time by the configuration option
+C<./configure --with-drive-if=...>. In the rare case where you
+might need to change this at run time, use C<guestfs_add_drive_with_if>
+or C<guestfs_add_drive_ro_with_if>.
+
Note that this call checks for the existence of C<filename>. This
stops you from specifying other types of drive which are supported
by qemu such as C<nbd:> and C<http:> URLs. To specify those, use
"\
Return the recovery process enabled flag.");
+ ("add_drive_with_if", (RErr, [String "filename"; String "iface"]), -1, [],
+ [],
+ "add a drive specifying the QEMU block emulation to use",
+ "\
+This is the same as C<guestfs_add_drive> but it allows you
+to specify the QEMU interface emulation to use at run time.");
+
+ ("add_drive_ro_with_if", (RErr, [String "filename"; String "iface"]), -1, [],
+ [],
+ "add a drive read-only specifying the QEMU block emulation to use",
+ "\
+This is the same as C<guestfs_add_drive_ro> but it allows you
+to specify the QEMU interface emulation to use at run time.");
+
]
(* daemon_functions are any functions which cause some action
[InitEmpty, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["write_file"; "/new"; "new file contents"; "0"];
["cat"; "/new"]], "new file contents")],
"make a filesystem",
[InitEmpty, Always, TestOutputListOfDevices (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["mounts"]], ["/dev/sda1"]);
InitEmpty, Always, TestOutputList (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["umount"; "/"];
["mounts"]], [])],
"unmount a filesystem",
["mkfs"; "ext2"; "/dev/sda1"];
["mkfs"; "ext2"; "/dev/sda2"];
["mkfs"; "ext2"; "/dev/sda3"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["mkdir"; "/mp1"];
- ["mount"; "/dev/sda2"; "/mp1"];
+ ["mount_options"; ""; "/dev/sda2"; "/mp1"];
["mkdir"; "/mp1/mp2"];
- ["mount"; "/dev/sda3"; "/mp1/mp2"];
+ ["mount_options"; ""; "/dev/sda3"; "/mp1/mp2"];
["mkdir"; "/mp1/mp2/mp3"];
["umount_all"];
["mounts"]], [])],
[InitNone, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext3"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["write_file"; "/new"; "test file"; "0"];
["umount"; "/dev/sda1"];
["zerofree"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["cat"; "/new"]], "test file")],
"zero unused inodes and disk blocks on ext2/3 filesystem",
"\
["vgcreate"; "VG"; "/dev/sda1"];
["lvcreate"; "LV"; "VG"; "10"];
["mkfs"; "ext2"; "/dev/VG/LV"];
- ["mount"; "/dev/VG/LV"; "/"];
+ ["mount_options"; ""; "/dev/VG/LV"; "/"];
["write_file"; "/new"; "test content"; "0"];
["umount"; "/"];
["lvresize"; "/dev/VG/LV"; "20"];
["e2fsck_f"; "/dev/VG/LV"];
["resize2fs"; "/dev/VG/LV"];
- ["mount"; "/dev/VG/LV"; "/"];
+ ["mount_options"; ""; "/dev/VG/LV"; "/"];
["cat"; "/new"]], "test content")],
"resize an LVM logical volume",
"\
[InitEmpty, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs_b"; "ext2"; "4096"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
["write_file"; "/new"; "new file contents"; "0"];
["cat"; "/new"]], "new file contents")],
"make a filesystem with block size",
[["sfdiskM"; "/dev/sda"; ",100 ,"];
["mke2journal"; "4096"; "/dev/sda1"];
["mke2fs_J"; "ext2"; "4096"; "/dev/sda2"; "/dev/sda1"];
- ["mount"; "/dev/sda2"; "/"];
+ ["mount_options"; ""; "/dev/sda2"; "/"];
["write_file"; "/new"; "new file contents"; "0"];
["cat"; "/new"]], "new file contents")],
"make ext2/3/4 external journal",
[["sfdiskM"; "/dev/sda"; ",100 ,"];
["mke2journal_L"; "4096"; "JOURNAL"; "/dev/sda1"];
["mke2fs_JL"; "ext2"; "4096"; "/dev/sda2"; "JOURNAL"];
- ["mount"; "/dev/sda2"; "/"];
+ ["mount_options"; ""; "/dev/sda2"; "/"];
["write_file"; "/new"; "new file contents"; "0"];
["cat"; "/new"]], "new file contents")],
"make ext2/3/4 external journal with label",
[["sfdiskM"; "/dev/sda"; ",100 ,"];
["mke2journal_U"; "4096"; uuid; "/dev/sda1"];
["mke2fs_JU"; "ext2"; "4096"; "/dev/sda2"; uuid];
- ["mount"; "/dev/sda2"; "/"];
+ ["mount_options"; ""; "/dev/sda2"; "/"];
["write_file"; "/new"; "new file contents"; "0"];
["cat"; "/new"]], "new file contents")]),
"make ext2/3/4 external journal with UUID",
["vg_activate"; "false"; "VG"];
["vgrename"; "VG"; "VG2"];
["vg_activate"; "true"; "VG2"];
- ["mount"; "/dev/VG2/LV"; "/"];
+ ["mount_options"; ""; "/dev/VG2/LV"; "/"];
["vgs"]], ["VG2"])],
"rename an LVM volume group",
"\
"for"; "forall"; "foreign"; "fun"; "function"; "functor"; "goto";
"hiding"; "if"; "import"; "in"; "include"; "infix"; "infixl";
"infixr"; "inherit"; "initializer"; "inline"; "instance"; "int";
+ "interface";
"land"; "lazy"; "let"; "long"; "lor"; "lsl"; "lsr"; "lxor";
"match"; "mdo"; "method"; "mod"; "module"; "mutable"; "new";
"newtype"; "object"; "of"; "open"; "or"; "private"; "qualified";
["lvm_remove_all"];
["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
- ["mount"; "/dev/sda1"; "/"]]
+ ["mount_options"; ""; "/dev/sda1"; "/"]]
| InitBasicFSonLVM ->
pr " /* InitBasicFSonLVM for %s: create ext2 on /dev/VG/LV */\n"
test_name;
["vgcreate"; "VG"; "/dev/sda1"];
["lvcreate"; "LV"; "VG"; "8"];
["mkfs"; "ext2"; "/dev/VG/LV"];
- ["mount"; "/dev/VG/LV"; "/"]]
+ ["mount_options"; ""; "/dev/VG/LV"; "/"]]
| InitISOFS ->
pr " /* InitISOFS for %s */\n" test_name;
List.iter (generate_test_command_call test_name)