\ A sometimes minimal FORTH compiler and tutorial for Linux / i386 systems. -*- asm -*-
\ By Richard W.M. Jones <rich@annexia.org> http://annexia.org/forth
\ This is PUBLIC DOMAIN (see public domain release statement below).
-\ $Id: jonesforth.f,v 1.4 2007-09-25 21:48:20 rich Exp $
+\ $Id: jonesforth.f,v 1.8 2007-09-28 19:39:21 rich Exp $
\
\ The first part of this tutorial is in jonesforth.S. Get if from http://annexia.org/forth
\
;
\ A few more character constants defined the same way as above.
+: ';' [ CHAR ; ] LITERAL ;
: '(' [ CHAR ( ] LITERAL ;
: ')' [ CHAR ) ] LITERAL ;
: '"' [ CHAR " ] LITERAL ;
: 'A' [ CHAR A ] LITERAL ;
: '0' [ CHAR 0 ] LITERAL ;
: '-' [ CHAR - ] LITERAL ;
+: '.' [ CHAR . ] LITERAL ;
\ While compiling, '[COMPILE] word' compiles 'word' if it would otherwise be IMMEDIATE.
: [COMPILE] IMMEDIATE
( -- ) means the word has no effect on the stack
)
+( Some more complicated stack examples, showing the stack notation. )
+: NIP ( x y -- y ) SWAP DROP ;
+: TUCK ( x y -- y x y ) DUP ROT ;
+: PICK ( x_u ... x_1 x_0 u -- x_u ... x_1 x_0 x_u )
+ 1+ ( add one because of 'u' on the stack )
+ 4 * ( multiply by the word size )
+ DSP@ + ( add to the stack pointer )
+ @ ( and fetch )
+;
+
+( With the looping constructs, we can now write SPACES, which writes n spaces to stdout. )
+: SPACES ( n -- )
+ BEGIN
+ DUP 0> ( while n > 0 )
+ WHILE
+ SPACE ( print a space )
+ 1- ( until we count down to 0 )
+ REPEAT
+ DROP
+;
+
( Standard words for manipulating BASE. )
: DECIMAL ( -- ) 10 BASE ! ;
: HEX ( -- ) 16 BASE ! ;
Another wrinkle of . and friends is that they obey the current base in the variable BASE.
BASE can be anything in the range 2 to 36.
+
+ While we're defining . &c we can also define .S which is a useful debugging tool. This
+ word prints the current stack (non-destructively) from top to bottom.
)
-: U.R ( u width -- )
- ( DROP XXX )
+
+( This is the underlying recursive definition of U. )
+: U. ( u -- )
BASE @ /MOD ( width rem quot )
DUP 0<> IF ( if quotient <> 0 then )
RECURSE ( print the quotient )
EMIT
;
-( U. is easy to define in terms of U.R Note the trailing space. )
-: U. 0 U.R SPACE ;
+(
+ FORTH word .S prints the contents of the stack. It doesn't alter the stack.
+ Very useful for debugging.
+)
+: .S ( -- )
+ DSP@ ( get current stack pointer )
+ BEGIN
+ DUP S0 @ <
+ WHILE
+ DUP @ U. ( print the stack element )
+ SPACE
+ 4+ ( move up )
+ REPEAT
+ DROP
+;
-( .R is easy, we just need to print the sign and then call U.R )
+( This word returns the width (in characters) of an unsigned number in the current base )
+: UWIDTH ( u -- width )
+ BASE @ / ( rem quot )
+ DUP 0<> IF ( if quotient <> 0 then )
+ RECURSE 1+ ( return 1+recursive call )
+ ELSE
+ DROP ( drop the zero quotient )
+ 1 ( return 1 )
+ THEN
+;
+
+: U.R ( u width -- )
+ SWAP ( width u )
+ DUP ( width u u )
+ UWIDTH ( width u uwidth )
+ -ROT ( u uwidth width )
+ SWAP - ( u width-uwidth )
+ ( At this point if the requested width is narrower, we'll have a negative number on the stack.
+ Otherwise the number on the stack is the number of spaces to print. But SPACES won't print
+ a negative number of spaces anyway, so it's now safe to call SPACES ... )
+ SPACES
+ ( ... and then call the underlying implementation of U. )
+ U.
+;
+
+(
+ .R prints a signed number, padded to a certain width. We can't just print the sign
+ and call U.R because we want the sign to be next to the number ('-123' instead of '- 123').
+)
: .R ( n width -- )
SWAP ( width n )
DUP 0< IF
- '-' EMIT ( print the sign )
- NEGATE ( negate the number so we can use U.R )
- SWAP 1- ( n width-1 )
+ NEGATE ( width u )
+ 1 ( save a flag to remember that it was negative | width n 1 )
+ ROT ( 1 width u )
+ SWAP ( 1 u width )
+ 1- ( 1 u width-1 )
ELSE
- SWAP ( n width )
+ 0 ( width u 0 )
+ ROT ( 0 width u )
+ SWAP ( 0 u width )
THEN
- DROP ( XXX )
- U.R
+ SWAP ( flag width u )
+ DUP ( flag width u u )
+ UWIDTH ( flag width u uwidth )
+ -ROT ( flag u uwidth width )
+ SWAP - ( flag u width-uwidth )
+
+ SPACES ( flag u )
+ SWAP ( u flag )
+
+ IF ( was it negative? print the - character )
+ '-' EMIT
+ THEN
+
+ U.
;
( Finally we can define word . in terms of .R, with a trailing space. )
: . 0 .R SPACE ;
-( ? fetches the integer at an address and prints it. )
-: ? @ . ;
+( The real U., note the trailing space. )
+: U. U. SPACE ;
-( With the looping constructs, we can now write SPACES, which writes n spaces to stdout. )
-: SPACES ( n -- )
- BEGIN
- DUP 0> ( while n > 0 )
- WHILE
- SPACE ( print a space )
- 1- ( until we count down to 0 )
- REPEAT
- DROP
-;
+( ? fetches the integer at an address and prints it. )
+: ? ( addr -- ) @ . ;
( c a b WITHIN returns true if a <= c and c < b )
: WITHIN
THEN
;
-( .S prints the contents of the stack. Very useful for debugging. )
-: .S ( -- )
- DSP@ ( get current stack pointer )
- BEGIN
- DUP S0 @ <
- WHILE
- DUP @ . ( print the stack element )
- 4+ ( move up )
- REPEAT
- DROP
-;
-
( DEPTH returns the depth of the stack. )
: DEPTH ( -- n )
S0 @ DSP@ -
(
S" string" is used in FORTH to define strings. It leaves the address of the string and
- its length on the stack, with the address at the top. The space following S" is the normal
+ its length on the stack, (length at the top of stack). The space following S" is the normal
space between FORTH words and is not a part of the string.
This is tricky to define because it has to do different things depending on whether
case we put the string at HERE (but we _don't_ change HERE). This is meant as a temporary
location, likely to be overwritten soon after.
)
-: S" IMMEDIATE ( -- len addr )
+: S" IMMEDIATE ( -- addr len )
STATE @ IF ( compiling? )
' LITSTRING , ( compile LITSTRING )
HERE @ ( save the address of the length word on the stack )
DROP ( drop the final " character )
HERE @ - ( calculate the length )
HERE @ ( push the start address )
+ SWAP ( addr len )
THEN
;
In immediate mode we just keep reading characters and printing them until we get to
the next double quote.
- In compile mode we use S" to store the string, then add EMITSTRING afterwards:
- LITSTRING <string length> <string rounded up to 4 bytes> EMITSTRING
+ In compile mode we use S" to store the string, then add TELL afterwards:
+ LITSTRING <string length> <string rounded up to 4 bytes> TELL
It may be interesting to note the use of [COMPILE] to turn the call to the immediate
word S" into compilation of that word. It compiles it into the definition of .",
: ." IMMEDIATE ( -- )
STATE @ IF ( compiling? )
[COMPILE] S" ( read the string, and compile LITSTRING, etc. )
- ' EMITSTRING , ( compile the final EMITSTRING )
+ ' TELL , ( compile the final TELL )
ELSE
( In immediate mode, just read characters and print them until we get
to the ending double quote. )
is the natural size for integers on this machine architecture. On this 32 bit machine therefore
CELLS just multiplies the top of stack by 4.
)
-: CELLS ( n -- n ) 4 * ;
+: CELLS ( n -- n ) 4* ;
(
So now we can define VARIABLE easily in much the same way as CONSTANT above. Refer to the
(
DUMP is used to dump out the contents of memory, in the 'traditional' hexdump format.
+
+ Notice that the parameters to DUMP (address, length) are compatible with string words
+ such as WORD and S".
)
: DUMP ( addr len -- )
BASE @ ROT ( save the current BASE at the bottom of the stack )
DUP 32 128 WITHIN IF ( 32 <= c < 128? )
EMIT
ELSE
- DROP [ CHAR ? ] LITERAL EMIT
+ DROP '.' EMIT
THEN
1+ SWAP 1- ( addr len linelen addr -- addr len addr+1 linelen-1 )
REPEAT
BASE ! ( restore saved BASE )
;
+(
+ CASE...ENDCASE is how we do switch statements in FORTH. There is no generally
+ agreed syntax for this, so I've gone for the syntax mandated by the ISO standard
+ FORTH (ANS-FORTH).
+
+ ( some value on the stack )
+ CASE
+ test1 OF ... ENDOF
+ test2 OF ... ENDOF
+ testn OF ... ENDOF
+ ... ( default case )
+ ENDCASE
+
+ The CASE statement tests the value on the stack by comparing it for equality with
+ test1, test2, ..., testn and executes the matching piece of code within OF ... ENDOF.
+ If none of the test values match then the default case is executed. Inside the ... of
+ the default case, the value is still at the top of stack (it is implicitly DROP-ed
+ by ENDCASE). When ENDOF is executed it jumps after ENDCASE (ie. there is no "fall-through"
+ and no need for a break statement like in C).
+
+ The default case may be omitted. In fact the tests may also be omitted so that you
+ just have a default case, although this is probably not very useful.
+
+ An example (assuming that 'q', etc. are words which push the ASCII value of the letter
+ on the stack):
+
+ 0 VALUE QUIT
+ 0 VALUE SLEEP
+ KEY CASE
+ 'q' OF 1 TO QUIT ENDOF
+ 's' OF 1 TO SLEEP ENDOF
+ ( default case: )
+ ." Sorry, I didn't understand key <" DUP EMIT ." >, try again." CR
+ ENDCASE
+
+ (In some versions of FORTH, more advanced tests are supported, such as ranges, etc.
+ Other versions of FORTH need you to write OTHERWISE to indicate the default case.
+ As I said above, this FORTH tries to follow the ANS FORTH standard).
+
+ The implementation of CASE...ENDCASE is somewhat non-trivial. I'm following the
+ implementations from here:
+ http://www.uni-giessen.de/faq/archiv/forthfaq.case_endcase/msg00000.html
+
+ The general plan is to compile the code as a series of IF statements:
+
+ CASE (push 0 on the immediate-mode parameter stack)
+ test1 OF ... ENDOF test1 OVER = IF DROP ... ELSE
+ test2 OF ... ENDOF test2 OVER = IF DROP ... ELSE
+ testn OF ... ENDOF testn OVER = IF DROP ... ELSE
+ ... ( default case ) ...
+ ENDCASE DROP THEN [THEN [THEN ...]]
+
+ The CASE statement pushes 0 on the immediate-mode parameter stack, and that number
+ is used to count how many THEN statements we need when we get to ENDCASE so that each
+ IF has a matching THEN. The counting is done implicitly. If you recall from the
+ implementation above of IF, each IF pushes a code address on the immediate-mode stack,
+ and these addresses are non-zero, so by the time we get to ENDCASE the stack contains
+ some number of non-zeroes, followed by a zero. The number of non-zeroes is how many
+ times IF has been called, so how many times we need to match it with THEN.
+
+ This code uses [COMPILE] so that we compile calls to IF, ELSE, THEN instead of
+ actually calling them while we're compiling the words below.
+
+ As is the case with all of our control structures, they only work within word
+ definitions, not in immediate mode.
+)
+: CASE IMMEDIATE
+ 0 ( push 0 to mark the bottom of the stack )
+;
+
+: OF IMMEDIATE
+ ' OVER , ( compile OVER )
+ ' = , ( compile = )
+ [COMPILE] IF ( compile IF )
+ ' DROP , ( compile DROP )
+;
+
+: ENDOF IMMEDIATE
+ [COMPILE] ELSE ( ENDOF is the same as ELSE )
+;
+
+: ENDCASE IMMEDIATE
+ ' DROP , ( compile DROP )
+
+ ( keep compiling THEN until we get to our zero marker )
+ BEGIN
+ ?DUP
+ WHILE
+ [COMPILE] THEN
+ REPEAT
+;
+
+(
+ CFA> is the opposite of >CFA. It takes a codeword and tries to find the matching
+ dictionary definition.
+
+ In this FORTH this is not so easy. In fact we have to search through the dictionary
+ because we don't have a convenient back-pointer (as is often the case in other versions
+ of FORTH).
+
+ This word returns 0 if it doesn't find a match.
+)
+: CFA>
+ LATEST @ ( start at LATEST dictionary entry )
+ BEGIN
+ DUP 0<> ( while link pointer is not null )
+ WHILE
+ DUP >CFA ( cfa curr curr-cfa )
+ 2 PICK ( cfa curr curr-cfa cfa )
+ = IF ( found a match? )
+ NIP ( leave curr dictionary entry on the stack )
+ EXIT ( and return from the function )
+ THEN
+ @ ( follow link pointer back )
+ REPEAT
+ 2DROP ( restore stack )
+ 0 ( sorry, nothing found )
+;
+
+(
+ SEE disassembles a FORTH word.
+
+ We search for the dictionary entry of the word, then search again for the next
+ word (effectively, the end of the compiled word). This results in two pointers:
+
+ +---------+---+---+---+---+------------+------------+------------+------------+
+ | LINK | 3 | T | E | N | DOCOL | LIT | 10 | EXIT |
+ +---------+---+---+---+---+------------+------------+------------+------------+
+ ^ ^
+ | |
+ Start of word End of word
+
+ With this information we can have a go at decompiling the word. We need to
+ recognise "meta-words" like LIT, LITSTRING, BRANCH, etc. and treat those separately.
+)
+: SEE
+ WORD FIND ( find the dictionary entry to decompile )
+
+ ( now we search again, looking for the next word )
+ HERE @ ( address of the end of the last compiled word )
+ LATEST @ ( word last curr )
+ BEGIN
+ 2 PICK ( word last curr word )
+ OVER ( word last curr word curr )
+ <> ( word last curr word<>curr? )
+ WHILE ( word last curr )
+ NIP ( word curr )
+ DUP @ ( word curr prev (which becomes: word last curr) )
+ REPEAT
+
+ DROP ( at this point, the stack is: start-of-word end-of-word )
+ SWAP ( end-of-word start-of-word )
+
+ ( begin the definition with : NAME [IMMEDIATE] )
+ ':' EMIT SPACE DUP ID. SPACE
+ DUP ?IMMEDIATE IF ." IMMEDIATE " THEN
+
+ >DFA ( get the data address, ie. points after DOCOL | end-of-word start-of-data )
+
+ ( now we start decompiling until we hit the end of the word )
+ BEGIN ( end start )
+ 2DUP >
+ WHILE
+ DUP @ ( end start codeword )
+
+ CASE
+ ' LIT OF ( is it LIT ? )
+ 4 + DUP @ ( get next word which is the integer constant )
+ . ( and print it )
+ ENDOF
+ ' LITSTRING OF ( is it LITSTRING ? )
+ [ CHAR S ] LITERAL EMIT '"' EMIT SPACE ( print S"<space> )
+ 4 + DUP @ ( get the length word )
+ SWAP 4 + SWAP ( end start+4 length )
+ 2DUP TELL ( print the string )
+ '"' EMIT SPACE ( finish the string with a final quote )
+ + ALIGNED ( end start+4+len, aligned )
+ 4 - ( because we're about to add 4 below )
+ ENDOF
+ ' 0BRANCH OF ( is it 0BRANCH ? )
+ ." 0BRANCH ( "
+ 4 + DUP @ ( print the offset )
+ .
+ ')' EMIT SPACE
+ ENDOF
+ ' BRANCH OF ( is it BRANCH ? )
+ ." BRANCH ( "
+ 4 + DUP @ ( print the offset )
+ .
+ ')' EMIT SPACE
+ ENDOF
+ ' ' OF ( is it ' (TICK) ? )
+ [ CHAR ' ] LITERAL EMIT SPACE
+ 4 + DUP @ ( get the next codeword )
+ CFA> ( and force it to be printed as a dictionary entry )
+ ID. SPACE
+ ENDOF
+ ' EXIT OF ( is it EXIT? )
+ ( We expect the last word to be EXIT, and if it is then we don't print it
+ because EXIT is normally implied by ;. EXIT can also appear in the middle
+ of words, and then it needs to be printed. )
+ 2DUP ( end start end start )
+ 4 + ( end start end start+4 )
+ <> IF ( end start | we're not at the end )
+ ." EXIT "
+ THEN
+ ENDOF
+ ( default case: )
+ DUP ( in the default case we always need to DUP before using )
+ CFA> ( look up the codeword to get the dictionary entry )
+ ID. SPACE ( and print it )
+ ENDCASE
+
+ 4 + ( end start+4 )
+ REPEAT
+
+ ';' EMIT CR
+
+ 2DROP ( restore stack )
+;
+
( Finally print the welcome prompt. )
." JONESFORTH VERSION " VERSION . CR
." OK "
git.annexia.org / jonesforth.git / blobdiff