Set the value associated with C<path> to C<value>.
+=head2 blockdev-flushbufs
+
+ blockdev-flushbufs device
+
+This tells the kernel to flush internal buffers associated
+with C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getbsz
+
+ blockdev-getbsz device
+
+This returns the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getro
+
+ blockdev-getro device
+
+Returns a boolean indicating if the block device is read-only
+(true if read-only, false if not).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getsize64
+
+ blockdev-getsize64 device
+
+This returns the size of the device in bytes.
+
+See also C<blockdev_getsz>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getss
+
+ blockdev-getss device
+
+This returns the size of sectors on a block device.
+Usually 512, but can be larger for modern devices.
+
+(Note, this is not the size in sectors, use C<blockdev_getsz>
+for that).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getsz
+
+ blockdev-getsz device
+
+This returns the size of the device in units of 512-byte sectors
+(even if the sectorsize isn't 512 bytes ... weird).
+
+See also C<blockdev_getss> for the real sector size of
+the device, and C<blockdev_getsize64> for the more
+useful I<size in bytes>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-rereadpt
+
+ blockdev-rereadpt device
+
+Reread the partition table on C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-setbsz
+
+ blockdev-setbsz device blocksize
+
+This sets the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-setro
+
+ blockdev-setro device
+
+Sets the block device named C<device> to read-only.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-setrw
+
+ blockdev-setrw device
+
+Sets the block device named C<device> to read-write.
+
+This uses the L<blockdev(8)> command.
+
=head2 cat
cat path
Note that this function cannot correctly handle binary files
(specifically, files containing C<\0> character which is treated
-as end of string). For those you need to use the C<read_file>
+as end of string). For those you need to use the C<download>
function which has a more complex interface.
Because of the message protocol, there is a transfer limit
of somewhere between 2MB and 4MB. To transfer large files you should use
FTP.
+=head2 checksum
+
+ checksum csumtype path
+
+This call computes the MD5, SHAx or CRC checksum of the
+file named C<path>.
+
+The type of checksum to compute is given by the C<csumtype>
+parameter which must have one of the following values:
+
+=over 4
+
+=item C<crc>
+
+Compute the cyclic redundancy check (CRC) specified by POSIX
+for the C<cksum> command.
+
+=item C<md5>
+
+Compute the MD5 hash (using the C<md5sum> program).
+
+=item C<sha1>
+
+Compute the SHA1 hash (using the C<sha1sum> program).
+
+=item C<sha224>
+
+Compute the SHA224 hash (using the C<sha224sum> program).
+
+=item C<sha256>
+
+Compute the SHA256 hash (using the C<sha256sum> program).
+
+=item C<sha384>
+
+Compute the SHA384 hash (using the C<sha384sum> program).
+
+=item C<sha512>
+
+Compute the SHA512 hash (using the C<sha512sum> program).
+
+=back
+
+The checksum is returned as a printable string.
+
=head2 chmod
chmod mode path
=head2 command
- command arguments,...
+ command 'arguments ...'
This call runs a command from the guest filesystem. The
filesystem must be mounted, and must contain a compatible
=head2 command-lines
- command-lines arguments,...
+ command-lines 'arguments ...'
This is the same as C<command>, but splits the
result into a list of lines.
C<value> can be NULL.
+=head2 download
+
+ download remotefilename (filename|-)
+
+Download file C<remotefilename> and save it as C<filename>
+on the local machine.
+
+C<filename> can also be a named pipe.
+
+See also C<upload>, C<cat>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
=head2 exists
exists path
This is always non-NULL. If it wasn't set already, then this will
return the default path.
+=head2 get-qemu
+
+ get-qemu
+
+Return the current qemu binary.
+
+This is always non-NULL. If it wasn't set already, then this will
+return the default qemu binary name.
+
+=head2 get-state
+
+ get-state
+
+This returns the current state as an opaque integer. This is
+only useful for printing debug and internal error messages.
+
+For more information on states, see L<guestfs(3)>.
+
=head2 get-verbose
get-verbose
This returns the verbose messages flag.
+=head2 is-busy
+
+ is-busy
+
+This returns true iff this handle is busy processing a command
+(in the C<BUSY> state).
+
+For more information on states, see L<guestfs(3)>.
+
+=head2 is-config
+
+ is-config
+
+This returns true iff this handle is being configured
+(in the C<CONFIG> state).
+
+For more information on states, see L<guestfs(3)>.
+
=head2 is-dir
is-dir path
See also C<stat>.
+=head2 is-launching
+
+ is-launching
+
+This returns true iff this handle is launching the subprocess
+(in the C<LAUNCHING> state).
+
+For more information on states, see L<guestfs(3)>.
+
+=head2 is-ready
+
+ is-ready
+
+This returns true iff this handle is ready to accept commands
+(in the C<READY> state).
+
+For more information on states, see L<guestfs(3)>.
+
=head2 kill-subprocess
kill-subprocess
Setting C<path> to C<NULL> restores the default path.
+=head2 set-qemu | qemu
+
+ set-qemu qemu
+
+Set the qemu binary that we will use.
+
+The default is chosen when the library was compiled by the
+configure script.
+
+You can also override this by setting the C<LIBGUESTFS_QEMU>
+environment variable.
+
+The string C<qemu> is stashed in the libguestfs handle, so the caller
+must make sure it remains valid for the lifetime of the handle.
+
+Setting C<qemu> to C<NULL> restores the default qemu binary.
+
=head2 set-verbose | verbose
set-verbose true|false
=head2 sfdisk
- sfdisk device cyls heads sectors lines,...
+ sfdisk device cyls heads sectors 'lines ...'
This is a direct interface to the L<sfdisk(8)> program for creating
partitions on block devices.
You should always call this if you have modified a disk image, before
closing the handle.
+=head2 tar-in
+
+ tar-in (tarfile|-) directory
+
+This command uploads and unpacks local file C<tarfile> (an
+I<uncompressed> tar file) into C<directory>.
+
+To upload a compressed tarball, use C<tgz_in>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
+=head2 tar-out
+
+ tar-out directory (tarfile|-)
+
+This command packs the contents of C<directory> and downloads
+it to local file C<tarfile>.
+
+To download a compressed tarball, use C<tgz_out>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
+=head2 tgz-in
+
+ tgz-in (tarball|-) directory
+
+This command uploads and unpacks local file C<tarball> (a
+I<gzip compressed> tar file) into C<directory>.
+
+To upload an uncompressed tarball, use C<tar_in>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
+=head2 tgz-out
+
+ tgz-out directory (tarball|-)
+
+This command packs the contents of C<directory> and downloads
+it to local file C<tarball>.
+
+To download an uncompressed tarball, use C<tar_out>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
=head2 touch
touch path
Some internal mounts are not unmounted by this call.
+=head2 upload
+
+ upload (filename|-) remotefilename
+
+Upload local file C<filename> to C<remotefilename> on the
+filesystem.
+
+C<filename> can also be a named pipe.
+
+See also C<download>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
=head2 vgcreate
- vgcreate volgroup physvols,...
+ vgcreate volgroup 'physvols ...'
This creates an LVM volume group called C<volgroup>
from the non-empty list of physical volumes C<physvols>.
git.annexia.org / libguestfs.git / blobdiff