guestfish -a disk.img -m dev[:mountpoint]
- guestfish -i libvirt-domain
+ guestfish -d libvirt-domain
- guestfish -i disk.img [disk.img ...]
+ guestfish -a disk.img -i
+
+ guestfish -d libvirt-domain -i
=head1 WARNING
--mount /dev/sda1:/boot \
edit /boot/grub/grub.conf
-=head2 Using virt-inspector
+=head2 Mount disks automatically
+
+Use the I<-i> option to automatically mount the
+disks from a virtual machine:
-Use the I<-i> option to get virt-inspector to mount
-the filesystems automatically as they would be mounted
-in the virtual machine:
+ guestfish --ro -a disk.img -i cat /etc/group
- guestfish --ro -i disk.img cat /etc/group
+ guestfish --ro -d libvirt-domain -i cat /etc/group
=head2 As a script interpreter
Add a block device or virtual machine image to the shell.
+=item B<-c URI> | B<--connect URI>
+
+When used in conjunction with the I<-d> option, this specifies
+the libvirt URI to use. The default is to use the default libvirt
+connection.
+
+=item B<-d libvirt-domain> | B<--domain libvirt-domain>
+
+Add disks from the named libvirt domain. If the I<--ro> option is
+also used, then any libvirt domain can be used. However in write
+mode, only libvirt domains which are shut down can be named here.
+
=item B<-D> | B<--no-dest-paths>
Don't tab-complete paths on the guest filesystem. It is useful to be
=item B<-i> | B<--inspector>
-Run virt-inspector on the named libvirt domain or list of disk
-images. If virt-inspector is available and if it can identify
-the domain or disk images, then partitions will be mounted
-correctly at start-up.
+Using L<virt-inspector(1)> code, inspect the disks looking for
+an operating system and mount filesystems as they would be
+mounted on the real virtual machine.
Typical usage is either:
- guestfish -i myguest
+ guestfish -d myguest -i
(for an inactive libvirt domain called I<myguest>), or:
- guestfish --ro -i myguest
+ guestfish --ro -d myguest -i
(for active domains, readonly), or specify the block device directly:
- guestfish -i /dev/Guests/MyGuest
+ guestfish -a /dev/Guests/MyGuest -i
+
+Note that the command line syntax changed slightly over older
+versions of guestfish. You can still use the old syntax:
+
+ guestfish [--ro] -i disk.img
-You cannot use I<-a>, I<-m>, I<-N>, I<--listen>, I<--remote> or
-I<--selinux> in conjunction with this option, and options other than
-I<--ro> might not behave correctly.
+ guestfish [--ro] -i libvirt-domain
-See also: L<virt-inspector(1)>.
+=item B<--keys-from-stdin>
+
+Read key or passphrase parameters from stdin. The default is
+to try to read passphrases from the user by opening C</dev/tty>.
=item B<--listen>
I<-N> creates a preformatted disk with a filesystem and adds it.
See L</PREPARED DISK IMAGES> below.
+=item B<--progress-bars>
+
+Enable progress bars, even when guestfish is used non-interactively.
+
+Progress bars are enabled by default when guestfish is used as an
+interactive shell.
+
+=item B<--no-progress-bars>
+
+Disable progress bars.
+
=item B<--remote[=pid]>
Send remote commands to C<$GUESTFISH_PID> or C<pid>. See section
echo "~"
+=head1 ENCRYPTED DISKS
+
+Libguestfs has some support for Linux guests encrypted according to
+the Linux Unified Key Setup (LUKS) standard, which includes nearly all
+whole disk encryption systems used by modern Linux guests. Currently
+only LVM-on-LUKS is supported.
+
+Identify encrypted block devices and partitions using L</vfs-type>:
+
+ ><fs> vfs-type /dev/sda2
+ crypto_LUKS
+
+Then open those devices using L</luks-open>. This creates a
+device-mapper device called C</dev/mapper/luksdev>.
+
+ ><fs> luks-open /dev/sda2 luksdev
+ Enter key or passphrase ("key"): <enter the passphrase>
+
+Finally you have to tell LVM to scan for volume groups on
+the newly created mapper device:
+
+ ><fs> vgscan
+ ><fs> vg-activate-all true
+
+The logical volume(s) can now be mounted in the usual way.
+
+Before closing a LUKS device you must unmount any logical volumes on
+it and deactivate the volume groups by calling C<vg-activate false VG>
+on each one. Then you can close the mapper device:
+
+ ><fs> vg-activate false /dev/VG
+ ><fs> luks-close /dev/mapper/luksdev
+
=head1 WINDOWS PATHS
If a path is prefixed with C<win:> then you can use Windows-style
guestfish -N disk:200M
+=head1 PROGRESS BARS
+
+Some (not all) long-running commands send progress notification
+messages as they are running. Guestfish turns these messages into
+progress bars.
+
+When a command that supports progress bars takes longer than two
+seconds to run, and if progress bars are enabled, then you will see
+one appearing below the command:
+
+ ><fs> copy-size /large-file /another-file 2048M
+ / 10% [#####-----------------------------------------] 00:30
+
+The spinner on the left hand side moves round once for every progress
+notification received from the backend. This is a (reasonably) golden
+assurance that the command is "doing something" even if the progress
+bar is not moving, because the command is able to send the progress
+notifications. When the bar reaches 100% and the command finishes,
+the spinner disappears.
+
+Progress bars are enabled by default when guestfish is used
+interactively. You can enable them even for non-interactive modes
+using I<--progress-bars>, and you can disable them completely using
+I<--no-progress-bars>.
+
=head1 GUESTFISH COMMANDS
The commands in this section are guestfish convenience commands, in
...
$endif
+Variables that you can set in inputrc that change the behaviour
+of guestfish in useful ways include:
+
+=over 4
+
+=item completion-ignore-case (default: on)
+
+By default, guestfish will ignore case when tab-completing
+paths on the disk. Use:
+
+ set completion-ignore-case off
+
+to make guestfish case sensitive.
+
+=back
+
=item test1.img
=item test2.img (etc)