Added links to support mailing list.

[virt-p2v.git] / virt-p2v.1.txt

diff --git a/virt-p2v.1.txt b/virt-p2v.1.txt
index 5b33f74..795e739 100644 (file)
--- a/virt-p2v.1.txt
+++ b/virt-p2v.1.txt
@@ -71,6 +71,11 @@ STANDARD USAGE
             should probably try this method even though occasionally it does
             not work.
 
             should probably try this method even though occasionally it does
             not work.
 

+        Ask for fixed IP address and gateway
+            In this mode the live CD will ask you for a fixed IP address and
+            gateway address, and will configure your chosen interface with
+            these.
+

         Configure from the shell
             In this mode you will be dropped into a command shell and you
             will need to issue the correct sequence of "/sbin/ifconfig"
         Configure from the shell
             In this mode you will be dropped into a command shell and you
             will need to issue the correct sequence of "/sbin/ifconfig"


@@ -85,6 +90,12 @@ STANDARD USAGE
             where "AA.BB.CC.DD" is the IP address and "GG.HH.II.JJ" is the
             gateway.
 
             where "AA.BB.CC.DD" is the IP address and "GG.HH.II.JJ" is the
             gateway.
 

+        QEMU user network
+            This option configures the network for use inside a QEMU user
+            network
+            (<http://fabrice.bellard.free.fr/qemu/qemu-doc.html#SEC30>). It
+            should only be used by developers.
+

     Devices
         This question lists out all local block devices (hard disk drives
         and similar) and asks you to choose which will be sent to the remote
     Devices
         This question lists out all local block devices (hard disk drives
         and similar) and asks you to choose which will be sent to the remote


@@ -305,9 +316,27 @@ BUILDING A CUSTOM LIVE CD
          Some (LV ("VolGroup00", "LogVol00"))
 
     "network"
          Some (LV ("VolGroup00", "LogVol00"))
 
     "network"

-        Set this to the choice for network setup. Use either "Some Auto" or
-        "Some Shell" for auto-configuration or shell (manual) configuration
-        respectively.
+        Set this to the choice for network setup. Use one of:
+
+        "Some Auto"
+            for auto-configuration
+
+        "Some Static"
+            to specify the interface, address, netmask and gateway
+            statically
+
+        "Some Shell"
+            to launch a shell
+
+        "Some QEMUUserNet"
+            to use a QEMU user network (developers only)
+
+    "static_network_config"
+        This setting only applies if "network" is set to "Some Static", in
+        which case you should set this to the static network settings, a
+        tuple of (interface, address, netmask, gateway, nameserver):
+
+         Some ("eth0", "192.168.2.5", "255.255.255.0", "192.168.2.1", "192.168.2.1")

 
     "hypervisor"
         Set this to the choice of hypervisor or virtualization system. The
 
     "hypervisor"
         Set this to the choice of hypervisor or virtualization system. The


@@ -379,6 +408,11 @@ TESTING AN ISO UNDER QEMU OR KVM
 
     You can also supply an "HDB" parameter to specify a second disk.
 
 
     You can also supply an "HDB" parameter to specify a second disk.
 

+MAILING LIST
+    Please direct questions to the et-mgmt-tools mailing list
+    <http://www.redhat.com/mailman/listinfo/et-mgmt-tools> <et-mgmt-tools @
+    redhat . com>
+

 SEE ALSO
     virsh(1), <http://www.libvirt.org/ocaml/>, <http://www.libvirt.org/>,
     <http://et.redhat.com/~rjones/>, <http://caml.inria.fr/>
 SEE ALSO
     virsh(1), <http://www.libvirt.org/ocaml/>, <http://www.libvirt.org/>,
     <http://et.redhat.com/~rjones/>, <http://caml.inria.fr/>