-msgid "B<--add image>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:172
-msgid "Add a block device or virtual machine image to the shell."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:174 ../fuse/guestmount.pod:81
-msgid ""
-"The format of the disk image is auto-detected. To override this and force a "
-"particular format use the I<--format=..> option."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:177
-msgid ""
-"Using this flag is mostly equivalent to using the C<add> command, with "
-"C<readonly:true> if the I<--ro> flag was given, and with C<format:...> if "
-"the I<--format:...> flag was given."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:181
-msgid "B<-c URI>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:183
-msgid "B<--connect URI>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:185 ../fuse/guestmount.pod:86
-msgid ""
-"When used in conjunction with the I<-d> option, this specifies the libvirt "
-"URI to use. The default is to use the default libvirt connection."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:189
-msgid "B<--csh>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:191
-msgid ""
-"If using the I<--listen> option and a csh-like shell, use this option. See "
-"section L</REMOTE CONTROL AND CSH> below."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:194
-msgid "B<-d libvirt-domain>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:196
-msgid "B<--domain libvirt-domain>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:198 ../fuse/guestmount.pod:92
-msgid ""
-"Add disks from the named libvirt domain. If the I<--ro> option is also "
-"used, then any libvirt domain can be used. However in write mode, only "
-"libvirt domains which are shut down can be named here."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:202
-msgid ""
-"Using this flag is mostly equivalent to using the C<add-domain> command, "
-"with C<readonly:true> if the I<--ro> flag was given, and with C<format:...> "
-"if the I<--format:...> flag was given."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:206
-msgid "B<-D>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:208
-msgid "B<--no-dest-paths>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:210
-msgid ""
-"Don't tab-complete paths on the guest filesystem. It is useful to be able "
-"to hit the tab key to complete paths on the guest filesystem, but this "
-"causes extra \"hidden\" guestfs calls to be made, so this option is here to "
-"allow this feature to be disabled."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:215 ../fuse/guestmount.pod:108
-msgid "B<--echo-keys>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:217 ../fuse/guestmount.pod:110
-msgid ""
-"When prompting for keys and passphrases, guestfish normally turns echoing "
-"off so you cannot see what you are typing. If you are not worried about "
-"Tempest attacks and there is no one else in the room you can specify this "
-"flag to see what you are typing."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:222
-msgid "B<-f file>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:224
-msgid "B<--file file>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:226
-msgid "Read commands from C<file>. To write pure guestfish scripts, use:"
-msgstr ""
-
-#. type: verbatim
-#: ../fish/guestfish.pod:229
-#, no-wrap
-msgid ""
-" #!/usr/bin/guestfish -f\n"
-"\n"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:231
-msgid "B<--format=raw|qcow2|..>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:233
-msgid "B<--format>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:235 ../fuse/guestmount.pod:117
-msgid ""
-"The default for the I<-a> option is to auto-detect the format of the disk "
-"image. Using this forces the disk format for I<-a> options which follow on "
-"the command line. Using I<--format> with no argument switches back to "
-"auto-detection for subsequent I<-a> options."
-msgstr ""
-
-#. type: verbatim
-#: ../fish/guestfish.pod:242
-#, no-wrap
-msgid ""
-" guestfish --format=raw -a disk.img\n"
-"\n"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:244
-msgid "forces raw format (no auto-detection) for C<disk.img>."
-msgstr ""
-
-#. type: verbatim
-#: ../fish/guestfish.pod:246
-#, no-wrap
-msgid ""
-" guestfish --format=raw -a disk.img --format -a another.img\n"
-"\n"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:248
-msgid ""
-"forces raw format (no auto-detection) for C<disk.img> and reverts to "
-"auto-detection for C<another.img>."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:251
-msgid ""
-"If you have untrusted raw-format guest disk images, you should use this "
-"option to specify the disk format. This avoids a possible security problem "
-"with malicious guests (CVE-2010-3851). See also L</add-drive-opts>."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:256
-msgid "B<-i>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:258
-msgid "B<--inspector>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:260 ../fuse/guestmount.pod:137
-msgid ""
-"Using L<virt-inspector(1)> code, inspect the disks looking for an operating "
-"system and mount filesystems as they would be mounted on the real virtual "
-"machine."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:264
-msgid "Typical usage is either:"
-msgstr ""
-
-#. type: verbatim
-#: ../fish/guestfish.pod:266
-#, no-wrap
-msgid ""
-" guestfish -d myguest -i\n"
-"\n"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:268
-msgid "(for an inactive libvirt domain called I<myguest>), or:"
-msgstr ""
-
-#. type: verbatim
-#: ../fish/guestfish.pod:270
-#, no-wrap
-msgid ""
-" guestfish --ro -d myguest -i\n"
-"\n"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:272
-msgid "(for active domains, readonly), or specify the block device directly:"
-msgstr ""
-
-#. type: verbatim
-#: ../fish/guestfish.pod:274
-#, no-wrap
-msgid ""
-" guestfish --rw -a /dev/Guests/MyGuest -i\n"
-"\n"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:276
-msgid ""
-"Note that the command line syntax changed slightly over older versions of "
-"guestfish. You can still use the old syntax:"
-msgstr ""
-
-#. type: verbatim
-#: ../fish/guestfish.pod:279
-#, no-wrap
-msgid ""
-" guestfish [--ro] -i disk.img\n"
-"\n"
-msgstr ""
-
-#. type: verbatim
-#: ../fish/guestfish.pod:281
-#, no-wrap
-msgid ""
-" guestfish [--ro] -i libvirt-domain\n"
-"\n"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:283
-msgid ""
-"Using this flag is mostly equivalent to using the C<inspect-os> command and "
-"then using other commands to mount the filesystems that were found."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:287 ../fuse/guestmount.pod:141
-msgid "B<--keys-from-stdin>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:289 ../fuse/guestmount.pod:143
-msgid ""
-"Read key or passphrase parameters from stdin. The default is to try to read "
-"passphrases from the user by opening C</dev/tty>."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:292
-msgid "B<--listen>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:294
-msgid ""
-"Fork into the background and listen for remote commands. See section "
-"L</REMOTE CONTROL GUESTFISH OVER A SOCKET> below."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:297
-msgid "B<-m dev[:mountpoint]>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:299
-msgid "B<--mount dev[:mountpoint]>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:301
-msgid "Mount the named partition or logical volume on the given mountpoint."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:303
-msgid "If the mountpoint is omitted, it defaults to C</>."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:305
-msgid "You have to mount something on C</> before most commands will work."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:307
-msgid ""
-"If any I<-m> or I<--mount> options are given, the guest is automatically "
-"launched."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:310
-msgid ""
-"If you don't know what filesystems a disk image contains, you can either run "
-"guestfish without this option, then list the partitions, filesystems and LVs "
-"available (see L</list-partitions>, L</list-filesystems> and L</lvs> "
-"commands), or you can use the L<virt-filesystems(1)> program."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:316
-msgid ""
-"Using this flag is mostly equivalent to using the C<mount-options> command "
-"or the C<mount-ro> command if the I<--ro> flag was given."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:319
-msgid "B<-n>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:321
-msgid "B<--no-sync>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:323
-msgid ""
-"Disable autosync. This is enabled by default. See the discussion of "
-"autosync in the L<guestfs(3)> manpage."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:326
-msgid "B<-N type>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:328
-msgid "B<--new type>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:330
-msgid "B<-N help>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:332
-msgid ""
-"Prepare a fresh disk image formatted as \"type\". This is an alternative to "
-"the I<-a> option: whereas I<-a> adds an existing disk, I<-N> creates a "
-"preformatted disk with a filesystem and adds it. See L</PREPARED DISK "
-"IMAGES> below."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:337
-msgid "B<--progress-bars>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:339
-msgid "Enable progress bars, even when guestfish is used non-interactively."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:341
-msgid ""
-"Progress bars are enabled by default when guestfish is used as an "
-"interactive shell."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:344
-msgid "B<--no-progress-bars>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:346
-msgid "Disable progress bars."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:348
-msgid "B<--remote[=pid]>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:350
-msgid ""
-"Send remote commands to C<$GUESTFISH_PID> or C<pid>. See section L</REMOTE "
-"CONTROL GUESTFISH OVER A SOCKET> below."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:353
-msgid "B<-r>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:355
-msgid "B<--ro>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:357
-msgid ""
-"This changes the I<-a>, I<-d> and I<-m> options so that disks are added and "
-"mounts are done read-only."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:360
-msgid ""
-"The option must always be used if the disk image or virtual machine might be "
-"running, and is generally recommended in cases where you don't need write "
-"access to the disk."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:364
-msgid ""
-"Note that prepared disk images created with I<-N> are not affected by this "
-"option. Also commands like C<add> are not affected - you have to specify "
-"the C<readonly:true> option explicitly if you need it."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:368
-msgid "See also L</OPENING DISKS FOR READ AND WRITE> below."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:370 ../fuse/guestmount.pod:208
-msgid "B<--selinux>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:372
-msgid "Enable SELinux support for the guest. See L<guestfs(3)/SELINUX>."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:374
-msgid "B<-v>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:376
-msgid "B<--verbose>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:378
-msgid ""
-"Enable very verbose messages. This is particularly useful if you find a "
-"bug."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:381
-msgid "B<-V>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:383 ../tools/virt-edit.pl:88 ../tools/virt-win-reg.pl:112 ../tools/virt-resize.pl:270 ../tools/virt-list-filesystems.pl:69 ../tools/virt-tar.pl:119 ../tools/virt-make-fs.pl:169 ../tools/virt-list-partitions.pl:70
-msgid "B<--version>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:385
-msgid "Display the guestfish / libguestfs version number and exit."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:387
-msgid "B<-w>"
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:389
-msgid "B<--rw>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:391
-msgid ""
-"This option does nothing at the moment. See L</OPENING DISKS FOR READ AND "
-"WRITE> below."
-msgstr ""
-
-#. type: =item
-#: ../fish/guestfish.pod:394
-msgid "B<-x>"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:396
-msgid "Echo each command before executing it."
-msgstr ""
-
-#. type: =head1
-#: ../fish/guestfish.pod:400
-msgid "COMMANDS ON COMMAND LINE"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:402
-msgid "Any additional (non-option) arguments are treated as commands to execute."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:405
-msgid ""
-"Commands to execute should be separated by a colon (C<:>), where the colon "
-"is a separate parameter. Thus:"
-msgstr ""
-
-#. type: verbatim
-#: ../fish/guestfish.pod:408
-#, no-wrap
-msgid ""
-" guestfish cmd [args...] : cmd [args...] : cmd [args...] ...\n"
-"\n"
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:410
-msgid ""
-"If there are no additional arguments, then we enter a shell, either an "
-"interactive shell with a prompt (if the input is a terminal) or a "
-"non-interactive shell."
-msgstr ""
-
-#. type: textblock
-#: ../fish/guestfish.pod:414
-msgid ""
-"In either command line mode or non-interactive shell, the first command that "
-"gives an error causes the whole shell to exit. In interactive mode (with a "
-"prompt) if a command fails, you can continue to enter commands."
-msgstr ""
-
-#. type: =head1
-#: ../fish/guestfish.pod:419
-msgid "USING launch (OR run)"