+#: ../fish/guestfish.pod:1060
+msgid "Create a blank 200MB disk:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1062
+#, no-wrap
+msgid ""
+" guestfish -N disk:200M\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:1064
+msgid "PROGRESS BARS"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1066
+msgid ""
+"Some (not all) long-running commands send progress notification messages as "
+"they are running. Guestfish turns these messages into progress bars."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1070
+msgid ""
+"When a command that supports progress bars takes longer than two seconds to "
+"run, and if progress bars are enabled, then you will see one appearing below "
+"the command:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1074
+#, no-wrap
+msgid ""
+" ><fs> copy-size /large-file /another-file 2048M\n"
+" / 10% [#####-----------------------------------------] 00:30\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1077
+msgid ""
+"The spinner on the left hand side moves round once for every progress "
+"notification received from the backend. This is a (reasonably) golden "
+"assurance that the command is \"doing something\" even if the progress bar "
+"is not moving, because the command is able to send the progress "
+"notifications. When the bar reaches 100% and the command finishes, the "
+"spinner disappears."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1084
+msgid ""
+"Progress bars are enabled by default when guestfish is used interactively. "
+"You can enable them even for non-interactive modes using I<--progress-bars>, "
+"and you can disable them completely using I<--no-progress-bars>."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:1089
+msgid "GUESTFISH COMMANDS"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1091
+msgid ""
+"The commands in this section are guestfish convenience commands, in other "
+"words, they are not part of the L<guestfs(3)> API."
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:1094
+msgid "help"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1096
+#, no-wrap
+msgid ""
+" help\n"
+" help cmd\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1099
+msgid "Without any parameter, this provides general help."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1101
+msgid "With a C<cmd> parameter, this displays detailed help for that command."
+msgstr ""
+
+#. type: =head2
+#: ../fish/guestfish.pod:1103
+msgid "quit | exit"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1105
+msgid "This exits guestfish. You can also use C<^D> key."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1107
+msgid "@FISH_COMMANDS@"
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:1109
+msgid "COMMANDS"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1111 ../src/guestfs.pod:1505
+msgid "@ACTIONS@"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1115
+msgid ""
+"guestfish returns 0 if the commands completed without error, or 1 if there "
+"was an error."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1122
+msgid "EDITOR"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1124
+msgid ""
+"The C<edit> command uses C<$EDITOR> as the editor. If not set, it uses "
+"C<vi>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1127 ../src/guestfs.pod:3198
+msgid "FEBOOTSTRAP_KERNEL"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1129 ../src/guestfs.pod:3200
+msgid "FEBOOTSTRAP_MODULES"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1131 ../src/guestfs.pod:3202
+msgid ""
+"These two environment variables allow the kernel that libguestfs uses in the "
+"appliance to be selected. If C<$FEBOOTSTRAP_KERNEL> is not set, then the "
+"most recent host kernel is chosen. For more information about kernel "
+"selection, see L<febootstrap-supermin-helper(8)>. This feature is only "
+"available in febootstrap E<ge> 3.8."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1137
+msgid "GUESTFISH_DISPLAY_IMAGE"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1139
+msgid ""
+"The C<display> command uses C<$GUESTFISH_DISPLAY_IMAGE> to display images. "
+"If not set, it uses L<display(1)>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1142
+msgid "GUESTFISH_PID"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1144
+msgid ""
+"Used with the I<--remote> option to specify the remote guestfish process to "
+"control. See section L</REMOTE CONTROL GUESTFISH OVER A SOCKET>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1148
+msgid "HEXEDITOR"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1150
+msgid ""
+"The L</hexedit> command uses C<$HEXEDITOR> as the external hex editor. If "
+"not specified, the external L<hexedit(1)> program is used."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1154
+msgid "HOME"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1156
+msgid ""
+"If compiled with GNU readline support, various files in the home directory "
+"can be used. See L</FILES>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1159 ../src/guestfs.pod:3208
+msgid "LIBGUESTFS_APPEND"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1161 ../src/guestfs.pod:3210
+msgid "Pass additional options to the guest kernel."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1163 ../src/guestfs.pod:3212
+msgid "LIBGUESTFS_DEBUG"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1165
+msgid ""
+"Set C<LIBGUESTFS_DEBUG=1> to enable verbose messages. This has the same "
+"effect as using the B<-v> option."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1168 ../src/guestfs.pod:3217
+msgid "LIBGUESTFS_MEMSIZE"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1170 ../src/guestfs.pod:3219
+msgid "Set the memory allocated to the qemu process, in megabytes. For example:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1173 ../src/guestfs.pod:3222
+#, no-wrap
+msgid ""
+" LIBGUESTFS_MEMSIZE=700\n"
+"\n"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1175 ../src/guestfs.pod:3224
+msgid "LIBGUESTFS_PATH"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1177
+msgid ""
+"Set the path that guestfish uses to search for kernel and initrd.img. See "
+"the discussion of paths in L<guestfs(3)>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1180 ../src/guestfs.pod:3229
+msgid "LIBGUESTFS_QEMU"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1182 ../src/guestfs.pod:3231
+msgid ""
+"Set the default qemu binary that libguestfs uses. If not set, then the qemu "
+"which was found at compile time by the configure script is used."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1186 ../src/guestfs.pod:3237
+msgid "LIBGUESTFS_TRACE"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1188
+msgid "Set C<LIBGUESTFS_TRACE=1> to enable command traces."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1190
+msgid "PAGER"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1192
+msgid ""
+"The C<more> command uses C<$PAGER> as the pager. If not set, it uses "
+"C<more>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1195 ../sparsify/virt-sparsify.pod:236 ../src/guestfs.pod:3242
+msgid "TMPDIR"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1197 ../src/guestfs.pod:3244
+msgid ""
+"Location of temporary directory, defaults to C</tmp> except for the cached "
+"supermin appliance which defaults to C</var/tmp>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1200 ../src/guestfs.pod:3247
+msgid ""
+"If libguestfs was compiled to use the supermin appliance then the real "
+"appliance is cached in this directory, shared between all handles belonging "
+"to the same EUID. You can use C<$TMPDIR> to configure another directory to "
+"use in case C</var/tmp> is not large enough."
+msgstr ""
+
+#. type: =head1
+#: ../fish/guestfish.pod:1208 ../fuse/guestmount.pod:288 ../rescue/virt-rescue.pod:273
+msgid "FILES"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1212 ../fuse/guestmount.pod:292 ../rescue/virt-rescue.pod:277
+msgid "$HOME/.libguestfs-tools.rc"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1214 ../fuse/guestmount.pod:294 ../rescue/virt-rescue.pod:279
+msgid "/etc/libguestfs-tools.conf"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1216 ../fuse/guestmount.pod:296 ../rescue/virt-rescue.pod:281
+msgid ""
+"This configuration file controls the default read-only or read-write mode "
+"(I<--ro> or I<--rw>)."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1219
+msgid "See L</OPENING DISKS FOR READ AND WRITE>."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1221
+msgid "$HOME/.guestfish"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1223
+msgid ""
+"If compiled with GNU readline support, then the command history is saved in "
+"this file."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1226
+msgid "$HOME/.inputrc"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1228
+msgid "/etc/inputrc"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1230
+msgid ""
+"If compiled with GNU readline support, then these files can be used to "
+"configure readline. For further information, please see "
+"L<readline(3)/INITIALIZATION FILE>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1234
+msgid "To write rules which only apply to guestfish, use:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1236
+#, no-wrap
+msgid ""
+" $if guestfish\n"
+" ...\n"
+" $endif\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1240
+msgid ""
+"Variables that you can set in inputrc that change the behaviour of guestfish "
+"in useful ways include:"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1245
+msgid "completion-ignore-case (default: on)"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1247
+msgid ""
+"By default, guestfish will ignore case when tab-completing paths on the "
+"disk. Use:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/guestfish.pod:1250
+#, no-wrap
+msgid ""
+" set completion-ignore-case off\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1252
+msgid "to make guestfish case sensitive."
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1256
+msgid "test1.img"
+msgstr ""
+
+#. type: =item
+#: ../fish/guestfish.pod:1258
+msgid "test2.img (etc)"
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1260
+msgid ""
+"When using the I<-N> or I<--new> option, the prepared disk or filesystem "
+"will be created in the file C<test1.img> in the current directory. The "
+"second use of I<-N> will use C<test2.img> and so on. Any existing file with "
+"the same name will be overwritten."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1269
+msgid ""
+"L<guestfs(3)>, L<http://libguestfs.org/>, L<virt-alignment-scan(1)>, "
+"L<virt-cat(1)>, L<virt-copy-in(1)>, L<virt-copy-out(1)>, L<virt-df(1)>, "
+"L<virt-edit(1)>, L<virt-filesystems(1)>, L<virt-inspector(1)>, "
+"L<virt-list-filesystems(1)>, L<virt-list-partitions(1)>, L<virt-ls(1)>, "
+"L<virt-make-fs(1)>, L<virt-rescue(1)>, L<virt-resize(1)>, "
+"L<virt-sparsify(1)>, L<virt-sysprep(1)>, L<virt-tar(1)>, L<virt-tar-in(1)>, "
+"L<virt-tar-out(1)>, L<virt-win-reg(1)>, L<display(1)>, L<hexedit(1)>, "
+"L<febootstrap-supermin-helper(8)>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/guestfish.pod:1301 ../src/guestfs.pod:3339 ../test-tool/libguestfs-test-tool.pod:112
+msgid "Copyright (C) 2009-2011 Red Hat Inc. L<http://libguestfs.org/>"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:5
+msgid "virt-copy-in - Copy files and directories into a virtual machine disk image."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-in.pod:9
+#, no-wrap
+msgid ""
+" virt-copy-in -a disk.img file|dir [file|dir ...] /destination\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-in.pod:11
+#, no-wrap
+msgid ""
+" virt-copy-in -d domain file|dir [file|dir ...] /destination\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:15
+msgid ""
+"Using C<virt-copy-in> on live virtual machines can be dangerous, potentially "
+"causing disk corruption. The virtual machine must be shut down before you "
+"use this command."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:21
+msgid ""
+"C<virt-copy-in> copies files and directories from the local disk into a "
+"virtual machine disk image or named libvirt domain."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:24
+msgid ""
+"You can give one of more filenames and directories on the command line. "
+"Directories are copied in recursively. The final parameter must be the "
+"destination directory in the disk image which must be an absolute path "
+"starting with a C</> character."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-in.pod:33
+#, no-wrap
+msgid ""
+" virt-copy-in -d MyGuest resolv.conf /etc\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:35 ../fish/virt-tar-in.pod:32
+msgid "Upload a home directory to a guest:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-in.pod:37
+#, no-wrap
+msgid ""
+" virt-copy-in -d MyGuest skel /home\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../fish/virt-copy-in.pod:39 ../fish/virt-copy-out.pod:28 ../fish/virt-tar-in.pod:36 ../fish/virt-tar-out.pod:30
+msgid "JUST A SHELL SCRIPT WRAPPER AROUND GUESTFISH"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:41
+msgid ""
+"This command is just a simple shell script wrapper around the "
+"L<guestfish(1)> C<copy-in> command. For anything more complex than a "
+"trivial copy, you are probably better off using guestfish directly."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:47 ../fish/virt-copy-out.pod:36 ../fish/virt-tar-in.pod:44 ../fish/virt-tar-out.pod:38
+msgid ""
+"Since the shell script just passes options straight to guestfish, read "
+"L<guestfish(1)> to see the full list of options."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:52
+msgid ""
+"L<guestfish(1)>, L<virt-cat(1)>, L<virt-copy-out(1)>, L<virt-edit(1)>, "
+"L<virt-tar-in(1)>, L<virt-tar-out(1)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-in.pod:66 ../fish/virt-copy-out.pod:55 ../fish/virt-tar-in.pod:64 ../fish/virt-tar-out.pod:57
+msgid "Copyright (C) 2011 Red Hat Inc. L<http://libguestfs.org/>"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:5
+msgid ""
+"virt-copy-out - Copy files and directories out of a virtual machine disk "
+"image."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-out.pod:9
+#, no-wrap
+msgid ""
+" virt-copy-out -a disk.img /file|dir [/file|dir ...] localdir\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-out.pod:11
+#, no-wrap
+msgid ""
+" virt-copy-out -d domain /file|dir [/file|dir ...] localdir\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:15
+msgid ""
+"C<virt-copy-out> copies files and directories out of a virtual machine disk "
+"image or named libvirt domain."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:18
+msgid ""
+"You can give one of more filenames and directories on the command line. "
+"Directories are copied out recursively."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:23
+msgid "Download the home directories from a virtual machine:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-copy-out.pod:25
+#, no-wrap
+msgid ""
+" mkdir homes\n"
+" virt-copy-out -d MyGuest /home homes\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:30
+msgid ""
+"This command is just a simple shell script wrapper around the "
+"L<guestfish(1)> C<copy-out> command. For anything more complex than a "
+"trivial copy, you are probably better off using guestfish directly."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-copy-out.pod:41
+msgid ""
+"L<guestfish(1)>, L<virt-cat(1)>, L<virt-copy-in(1)>, L<virt-edit(1)>, "
+"L<virt-tar-in(1)>, L<virt-tar-out(1)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:5
+msgid "virt-tar-in - Unpack a tarball into a virtual machine disk image."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-in.pod:9
+#, no-wrap
+msgid ""
+" virt-tar-in -a disk.img data.tar /destination\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-in.pod:11
+#, no-wrap
+msgid ""
+" virt-tar-in -d domain data.tar /destination\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-in.pod:13
+#, no-wrap
+msgid ""
+" zcat data.tar.gz | virt-tar-in -d domain - /destination\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:17
+msgid ""
+"Using C<virt-tar-in> on live virtual machines can be dangerous, potentially "
+"causing disk corruption. The virtual machine must be shut down before you "
+"use this command."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:23
+msgid ""
+"C<virt-tar-in> unpacks an uncompressed tarball into a virtual machine disk "
+"image or named libvirt domain."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:26
+msgid ""
+"The first parameter is the tar file. Use C<-> to read the tar file from "
+"standard input. The second parameter is the absolute target directory to "
+"unpack into."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-in.pod:34
+#, no-wrap
+msgid ""
+" virt-tar-in -d MyGuest homes.tar /home\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:38
+msgid ""
+"This command is just a simple shell script wrapper around the "
+"L<guestfish(1)> C<tar-in> command. For anything more complex than a trivial "
+"copy, you are probably better off using guestfish directly."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-in.pod:49
+msgid ""
+"L<guestfish(1)>, L<virt-cat(1)>, L<virt-copy-in(1)>, L<virt-copy-out(1)>, "
+"L<virt-edit(1)>, L<virt-make-fs(1)>, L<virt-tar-out(1)>, "
+"L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:5
+msgid "virt-tar-out - Pack a virtual machine disk image directory into a tarball."
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-out.pod:9
+#, no-wrap
+msgid ""
+" virt-tar-out -a disk.img /dir files.tar\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-out.pod:11
+#, no-wrap
+msgid ""
+" virt-tar-out -d domain /dir files.tar\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-out.pod:13
+#, no-wrap
+msgid ""
+" virt-tar-out -d domain /dir - | gzip --best > files.tar.gz\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:17
+msgid "C<virt-tar-out> packs a virtual machine disk image directory into a tarball."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:20
+msgid ""
+"The first parameter is the absolute path of the virtual machine directory. "
+"The second parameter is the tar file to write. Use C<-> to write to "
+"standard output."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:26
+msgid "Download the home directories from a guest:"
+msgstr ""
+
+#. type: verbatim
+#: ../fish/virt-tar-out.pod:28
+#, no-wrap
+msgid ""
+" virt-tar-out -d MyGuest /home - | gzip --best > homes.tar.gz\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:32
+msgid ""
+"This command is just a simple shell script wrapper around the "
+"L<guestfish(1)> C<tar-out> command. For anything more complex than a "
+"trivial copy, you are probably better off using guestfish directly."
+msgstr ""
+
+#. type: textblock
+#: ../fish/virt-tar-out.pod:43
+msgid ""
+"L<guestfish(1)>, L<virt-cat(1)>, L<virt-copy-in(1)>, L<virt-copy-out(1)>, "
+"L<virt-edit(1)>, L<virt-tar-in(1)>, L<http://libguestfs.org/>."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:5
+msgid "guestmount - Mount a guest filesystem on the host using FUSE and libguestfs"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:9
+#, no-wrap
+msgid ""
+" guestmount [--options] -a disk.img -m device [--ro] mountpoint\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:11
+#, no-wrap
+msgid ""
+" guestmount [--options] -a disk.img -i [--ro] mountpoint\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:13
+#, no-wrap
+msgid ""
+" guestmount [--options] -d Guest -i [--ro] mountpoint\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:17
+msgid ""
+"You must I<not> use C<guestmount> in read-write mode on live virtual "
+"machines. If you do this, you risk disk corruption in the VM."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:22
+msgid ""
+"The guestmount program can be used to mount virtual machine filesystems and "
+"other disk images on the host. It uses libguestfs for access to the guest "
+"filesystem, and FUSE (the \"filesystem in userspace\") to make it appear as "
+"a mountable device."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:27
+msgid ""
+"Along with other options, you have to give at least one device (I<-a> "
+"option) or libvirt domain (I<-d> option), and at least one mountpoint (I<-m> "
+"option) or use the I<-i> inspection option. How this works is better "
+"explained in the L<guestfish(1)> manual page, or by looking at the examples "
+"below."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:33
+msgid ""
+"FUSE lets you mount filesystems as non-root. The mountpoint must be owned "
+"by you, and the filesystem will not be visible to any other users unless you "
+"make certain global configuration changes to C</etc/fuse.conf>. To unmount "
+"the filesystem, use the C<fusermount -u> command."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:41
+msgid ""
+"For a typical Windows guest which has its main filesystem on the first "
+"partition:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:44
+#, no-wrap
+msgid ""
+" guestmount -a windows.img -m /dev/sda1 --ro /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:46
+msgid ""
+"For a typical Linux guest which has a /boot filesystem on the first "
+"partition, and the root filesystem on a logical volume:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:49
+#, no-wrap
+msgid ""
+" guestmount -a linux.img -m /dev/VG/LV -m /dev/sda1:/boot --ro /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:51
+msgid "To get libguestfs to detect guest mountpoints for you:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:53
+#, no-wrap
+msgid ""
+" guestmount -a guest.img -i --ro /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:55
+msgid "For a libvirt guest called \"Guest\" you could do:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:57
+#, no-wrap
+msgid ""
+" guestmount -d Guest -i --ro /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:59
+msgid ""
+"If you don't know what filesystems are contained in a guest or disk image, "
+"use L<virt-filesystems(1)> first:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:62
+#, no-wrap
+msgid ""
+" virt-filesystems MyGuest\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:64
+msgid ""
+"If you want to trace the libguestfs calls but without excessive debugging "
+"information, we recommend:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:67
+#, no-wrap
+msgid ""
+" guestmount [...] --trace /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:69
+msgid "If you want to debug the program, we recommend:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:71
+#, no-wrap
+msgid ""
+" guestmount [...] --trace --verbose /mnt\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../fuse/guestmount.pod:73 ../rescue/virt-rescue.pod:68 ../resize/virt-resize.pod:544
+msgid "NOTES"
+msgstr ""
+
+#. type: =head2
+#: ../fuse/guestmount.pod:75
+msgid "Other users cannot see the filesystem by default"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:77
+msgid ""
+"If you mount a filesystem as one user (eg. root), then other users will not "
+"be able to see it by default. The fix is to add the FUSE C<allow_other> "
+"option when mounting:"
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:81
+#, no-wrap
+msgid ""
+" sudo guestmount [...] -o allow_other /mnt\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:91
+msgid "Add a block device or virtual machine image."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:114
+msgid "B<--dir-cache-timeout N>"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:116
+msgid ""
+"Set the readdir cache timeout to I<N> seconds, the default being 60 "
+"seconds. The readdir cache [actually, there are several semi-independent "
+"caches] is populated after a readdir(2) call with the stat and extended "
+"attributes of the files in the directory, in anticipation that they will be "
+"requested soon after."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:122
+msgid ""
+"There is also a different attribute cache implemented by FUSE (see the FUSE "
+"option I<-o attr_timeout>), but the FUSE cache does not anticipate future "
+"requests, only cache existing ones."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:142
+msgid ""
+"If you have untrusted raw-format guest disk images, you should use this "
+"option to specify the disk format. This avoids a possible security problem "
+"with malicious guests (CVE-2010-3851). See also "
+"L<guestfs(3)/guestfs_add_drive_opts>."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:147
+msgid "B<--fuse-help>"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:149
+msgid "Display help on special FUSE options (see I<-o> below)."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:153
+msgid "Display brief help and exit."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:177
+msgid ""
+"Mount the named partition or logical volume on the given mountpoint B<in the "
+"guest> (this has nothing to do with mountpoints in the host)."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:180
+msgid ""
+"If the mountpoint is omitted, it defaults to C</>. You have to mount "
+"something on C</>."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:197
+msgid ""
+"By default, we attempt to sync the guest disk when the FUSE mountpoint is "
+"unmounted. If you specify this option, then we don't attempt to sync the "
+"disk. See the discussion of autosync in the L<guestfs(3)> manpage."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:202
+msgid "B<-o option>"
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:204
+msgid "B<--option option>"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:206
+msgid "Pass extra options to FUSE."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:208
+msgid ""
+"To get a list of all the extra options supported by FUSE, use the command "
+"below. Note that only the FUSE I<-o> options can be passed, and only some "
+"of them are a good idea."
+msgstr ""
+
+#. type: verbatim
+#: ../fuse/guestmount.pod:212
+#, no-wrap
+msgid ""
+" guestmount --fuse-help\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:214
+msgid "Some potentially useful FUSE options:"
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:218
+msgid "B<-o allow_other>"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:220
+msgid "Allow other users to see the filesystem."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:222
+msgid "B<-o attr_timeout=N>"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:224
+msgid "Enable attribute caching by FUSE, and set the timeout to I<N> seconds."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:226
+msgid "B<-o kernel_cache>"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:228
+msgid ""
+"Allow the kernel to cache files (reduces the number of reads that have to go "
+"through the L<guestfs(3)> API). This is generally a good idea if you can "
+"afford the extra memory usage."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:232
+msgid "B<-o uid=N> B<-o gid=N>"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:234
+msgid ""
+"Use these options to map all UIDs and GIDs inside the guest filesystem to "
+"the chosen values."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:243
+msgid ""
+"Add devices and mount everything read-only. Also disallow writes and make "
+"the disk appear read-only to FUSE."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:246
+msgid ""
+"This is highly recommended if you are not going to edit the guest disk. If "
+"the guest is running and this option is I<not> supplied, then there is a "
+"strong risk of disk corruption in the guest. We try to prevent this from "
+"happening, but it is not always possible."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:251 ../rescue/virt-rescue.pod:171
+msgid "See also L<guestfish(1)/OPENING DISKS FOR READ AND WRITE>."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:255
+msgid "Enable SELinux support for the guest."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:261
+msgid "Enable verbose messages from underlying libguestfs."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:267
+msgid "Display the program version and exit."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:276 ../fuse/guestmount.pod:299 ../rescue/virt-rescue.pod:201 ../rescue/virt-rescue.pod:284
+msgid "See L<guestfish(1)/OPENING DISKS FOR READ AND WRITE>."
+msgstr ""
+
+#. type: =item
+#: ../fuse/guestmount.pod:280
+msgid "B<--trace>"
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:282
+msgid "Trace libguestfs calls and entry into each FUSE function."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:284
+msgid "This also stops the daemon from forking into the background."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:310
+msgid ""
+"L<guestfish(1)>, L<virt-inspector(1)>, L<virt-cat(1)>, L<virt-edit(1)>, "
+"L<virt-tar(1)>, L<guestfs(3)>, L<http://libguestfs.org/>, "
+"L<http://fuse.sf.net/>."
+msgstr ""
+
+#. type: textblock
+#: ../fuse/guestmount.pod:325
+msgid "Copyright (C) 2009-2010 Red Hat Inc. L<http://libguestfs.org/>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:5
+msgid ""
+"virt-inspector - Display operating system version and other information "
+"about a virtual machine"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:9
+#, no-wrap
+msgid ""
+" virt-inspector [--options] -d domname\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:11
+#, no-wrap
+msgid ""
+" virt-inspector [--options] -a disk.img [-a disk.img ...]\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:15
+#, no-wrap
+msgid ""
+" virt-inspector domname\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:17 ../inspector/virt-inspector.pod:141
+#, no-wrap
+msgid ""
+" virt-inspector disk.img [disk.img ...]\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:21
+msgid ""
+"B<virt-inspector> examines a virtual machine or disk image and tries to "
+"determine the version of the operating system and other information about "
+"the virtual machine."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:25
+msgid "Virt-inspector produces XML output for feeding into other programs."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:27
+msgid ""
+"In the normal usage, use C<virt-inspector -d domname> where C<domname> is "
+"the libvirt domain (see: C<virsh list --all>)."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:30
+msgid ""
+"You can also run virt-inspector directly on disk images from a single "
+"virtual machine. Use C<virt-inspector -a disk.img>. In rare cases a domain "
+"has several block devices, in which case you should list several I<-a> "
+"options one after another, with the first corresponding to the guest's "
+"C</dev/sda>, the second to the guest's C</dev/sdb> and so on."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:37
+msgid ""
+"You can also run virt-inspector on install disks, live CDs, bootable USB "
+"keys and similar."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:40
+msgid ""
+"Virt-inspector can only inspect and report upon I<one domain at a time>. To "
+"inspect several virtual machines, you have to run virt-inspector several "
+"times (for example, from a shell script for-loop)."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:45
+msgid ""
+"Because virt-inspector needs direct access to guest images, it won't "
+"normally work over remote libvirt connections."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:48
+msgid ""
+"All of the information available from virt-inspector is also available "
+"through the core libguestfs inspection API (see L<guestfs(3)/INSPECTION>). "
+"The same information can also be fetched using guestfish or via libguestfs "
+"bindings in many programming languages (see L<guestfs(3)/USING LIBGUESTFS "
+"WITH OTHER PROGRAMMING LANGUAGES>)."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:81
+msgid ""
+"Libvirt is only used if you specify a C<domname> on the command line. If "
+"you specify guest block devices directly (I<-a>), then libvirt is not used "
+"at all."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:94
+msgid ""
+"When prompting for keys and passphrases, virt-inspector normally turns "
+"echoing off so you cannot see what you are typing. If you are not worried "
+"about Tempest attacks and there is no one else in the room you can specify "
+"this flag to see what you are typing."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:103 ../tools/virt-list-filesystems.pl:93 ../tools/virt-list-partitions.pl:94 ../tools/virt-tar.pl:143 ../tools/virt-win-reg.pl:144
+msgid ""
+"Specify the format of disk images given on the command line. If this is "
+"omitted then the format is autodetected from the content of the disk image."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:107 ../tools/virt-list-filesystems.pl:97 ../tools/virt-list-partitions.pl:98 ../tools/virt-tar.pl:147 ../tools/virt-win-reg.pl:148
+msgid ""
+"If disk images are requested from libvirt, then this program asks libvirt "
+"for this information. In this case, the value of the format parameter is "
+"ignored."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:111 ../resize/virt-resize.pod:314 ../resize/virt-resize.pod:406 ../sparsify/virt-sparsify.pod:132 ../tools/virt-list-filesystems.pl:101 ../tools/virt-list-partitions.pl:102 ../tools/virt-tar.pl:151 ../tools/virt-win-reg.pl:152
+msgid ""
+"If working with untrusted raw-format guest disk images, you should ensure "
+"the format is always specified."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:139
+msgid "Previous versions of virt-inspector allowed you to write either:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:145
+#, no-wrap
+msgid ""
+" virt-inspector guestname\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: ../inspector/virt-inspector.pod:153
+msgid "XML FORMAT"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:155
+msgid ""
+"The virt-inspector XML is described precisely in a RELAX NG schema file "
+"C<virt-inspector.rng> which is supplied with libguestfs. This section is "
+"just an overview."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:159
+msgid ""
+"The top-level element is E<lt>operatingsystemsE<gt>, and it contains one or "
+"more E<lt>operatingsystemE<gt> elements. You would only see more than one "
+"E<lt>operatingsystemE<gt> element if the virtual machine is multi-boot, "
+"which is vanishingly rare in real world VMs."
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:164
+msgid "E<lt>operatingsystemE<gt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:166
+msgid ""
+"In the E<lt>operatingsystemE<gt> tag are various optional fields that "
+"describe the operating system, its architecture, the descriptive \"product "
+"name\" string, the type of OS and so on, as in this example:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:170
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" <root>/dev/sda2</root>\n"
+" <name>windows</name>\n"
+" <arch>i386</arch>\n"
+" <distro>windows</distro>\n"
+" <product_name>Windows 7 Enterprise</product_name>\n"
+" <product_variant>Client</product_variant>\n"
+" <major_version>6</major_version>\n"
+" <minor_version>1</minor_version>\n"
+" <windows_systemroot>/Windows</windows_systemroot>\n"
+" <format>installed</format>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:183
+msgid ""
+"In brief, E<lt>nameE<gt> is the class of operating system (something like "
+"C<linux> or C<windows>), E<lt>distroE<gt> is the distribution (eg. C<fedora> "
+"but many other distros are recognized) and E<lt>archE<gt> is the guest "
+"architecture. The other fields are fairly self-explanatory, but because "
+"these fields are taken directly from the libguestfs inspection API you can "
+"find precise information from L<guestfs(3)/INSPECTION>."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:191
+msgid ""
+"The E<lt>rootE<gt> element is the root filesystem device, but from the point "
+"of view of libguestfs (block devices may have completely different names "
+"inside the VM itself)."
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:195
+msgid "E<lt>mountpointsE<gt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:197
+msgid ""
+"Un*x-like guests typically have multiple filesystems which are mounted at "
+"various mountpoints, and these are described in the E<lt>mountpointsE<gt> "
+"element which looks like this:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:201
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" ...\n"
+" <mountpoints>\n"
+" <mountpoint dev=\"/dev/vg_f13x64/lv_root\">/</mountpoint>\n"
+" <mountpoint dev=\"/dev/sda1\">/boot</mountpoint>\n"
+" </mountpoints>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:209
+msgid ""
+"As with E<lt>rootE<gt>, devices are from the point of view of libguestfs, "
+"and may have completely different names inside the guest. Only mountable "
+"filesystems appear in this list, not things like swap devices."
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:214
+msgid "E<lt>filesystemsE<gt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:216
+msgid ""
+"E<lt>filesystemsE<gt> is like E<lt>mountpointsE<gt> but covers I<all> "
+"filesystems belonging to the guest, including swap and empty partitions. "
+"(In the rare case of a multi-boot guest, it covers filesystems belonging to "
+"this OS or shared with this OS and other OSes)."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:222
+msgid "You might see something like this:"
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:224
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" ...\n"
+" <filesystems>\n"
+" <filesystem dev=\"/dev/vg_f13x64/lv_root\">\n"
+" <type>ext4</type>\n"
+" <label>Fedora-13-x86_64</label>\n"
+" <uuid>e6a4db1e-15c2-477b-ac2a-699181c396aa</uuid>\n"
+" </filesystem>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:234
+msgid ""
+"The optional elements within E<lt>filesystemE<gt> are the filesystem type, "
+"the label, and the UUID."
+msgstr ""
+
+#. type: =head2
+#: ../inspector/virt-inspector.pod:237
+msgid "E<lt>applicationsE<gt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:239
+msgid ""
+"The related elements E<lt>package_formatE<gt>, E<lt>package_managementE<gt> "
+"and E<lt>applicationsE<gt> describe applications installed in the virtual "
+"machine."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:243
+msgid ""
+"E<lt>package_formatE<gt>, if present, describes the packaging system used. "
+"Typical values would be C<rpm> and C<deb>."
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:246
+msgid ""
+"E<lt>package_managementE<gt>, if present, describes the package manager. "
+"Typical values include C<yum>, C<up2date> and C<apt>"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:249
+msgid "E<lt>applicationsE<gt> lists the packages or applications installed."
+msgstr ""
+
+#. type: verbatim
+#: ../inspector/virt-inspector.pod:252
+#, no-wrap
+msgid ""
+" <operatingsystems>\n"
+" <operatingsystem>\n"
+" ...\n"
+" <applications>\n"
+" <application>\n"
+" <name>coreutils</name>\n"
+" <version>8.5</version>\n"
+" <release>1</release>\n"
+" </application>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../inspector/virt-inspector.pod:262