+#. type: textblock
+#: ../src/guestfs.pod:1755
+msgid ""
+"The callback can display to the user some type of progress bar or indicator "
+"which shows the ratio of C<position>:C<total>."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:1760
+msgid "0 E<lt>= C<position> E<lt>= C<total>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1764
+msgid ""
+"If any progress notification is sent during a call, then a final progress "
+"notification is always sent when C<position> = C<total> (I<unless> the call "
+"fails with an error)."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:1768
+msgid ""
+"This is to simplify caller code, so callers can easily set the progress "
+"indicator to \"100%\" at the end of the operation, without requiring special "
+"code to detect this case."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1774
+msgid ""
+"For some calls we are unable to estimate the progress of the call, but we "
+"can still generate progress messages to indicate activity. This is known as "
+"\"pulse mode\", and is directly supported by certain progress bar "
+"implementations (eg. GtkProgressBar)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1779
+msgid ""
+"For these calls, zero or more progress messages are generated with "
+"C<position = 0> and C<total = 1>, followed by a final message with "
+"C<position = total = 1>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1783
+msgid ""
+"As noted above, if the call fails with an error then the final message may "
+"not be generated."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1788
+msgid ""
+"The callback also receives the procedure number (C<proc_nr>) and serial "
+"number (C<serial>) of the call. These are only useful for debugging "
+"protocol issues, and the callback can normally ignore them. The callback "
+"may want to print these numbers in error messages or debugging messages."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1794
+msgid "If no callback is registered: progress messages are discarded."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:1796
+msgid "GUESTFS_EVENT_APPLIANCE (payload type: message buffer)"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1799
+msgid ""
+"The callback function is called whenever a log message is generated by qemu, "
+"the appliance kernel, guestfsd (daemon), or utility programs."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1802
+msgid ""
+"If the verbose flag (L</guestfs_set_verbose>) is set before launch (L</"
+"guestfs_launch>) then additional debug messages are generated."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1805 ../src/guestfs.pod:1819
+msgid ""
+"If no callback is registered: the messages are discarded unless the verbose "
+"flag is set in which case they are sent to stderr. You can override the "
+"printing of verbose messages to stderr by setting up a callback."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:1810
+msgid "GUESTFS_EVENT_LIBRARY (payload type: message buffer)"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1813
+msgid ""
+"The callback function is called whenever a log message is generated by the "
+"library part of libguestfs."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1816
+msgid ""
+"If the verbose flag (L</guestfs_set_verbose>) is set then additional debug "
+"messages are generated."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:1824
+msgid "GUESTFS_EVENT_TRACE (payload type: message buffer)"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1827
+msgid ""
+"The callback function is called whenever a trace message is generated. This "
+"only applies if the trace flag (L</guestfs_set_trace>) is set."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1830
+msgid ""
+"If no callback is registered: the messages are sent to stderr. You can "
+"override the printing of trace messages to stderr by setting up a callback."
+msgstr ""
+
+#. type: =head3
+#: ../src/guestfs.pod:1836
+msgid "guestfs_set_event_callback"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:1838
+#, no-wrap
+msgid ""
+" int guestfs_set_event_callback (guestfs_h *g,\n"
+" guestfs_event_callback cb,\n"
+" uint64_t event_bitmask,\n"
+" int flags,\n"
+" void *opaque);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1844
+msgid ""
+"This function registers a callback (C<cb>) for all event classes in the "
+"C<event_bitmask>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1847
+msgid ""
+"For example, to register for all log message events, you could call this "
+"function with the bitmask C<GUESTFS_EVENT_APPLIANCE|GUESTFS_EVENT_LIBRARY>. "
+"To register a single callback for all possible classes of events, use "
+"C<GUESTFS_EVENT_ALL>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1853
+msgid "C<flags> should always be passed as 0."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1855
+msgid ""
+"C<opaque> is an opaque pointer which is passed to the callback. You can use "
+"it for any purpose."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1858
+msgid ""
+"The return value is the event handle (an integer) which you can use to "
+"delete the callback (see below)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1861
+msgid ""
+"If there is an error, this function returns C<-1>, and sets the error in the "
+"handle in the usual way (see L</guestfs_last_error> etc.)"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1864
+msgid ""
+"Callbacks remain in effect until they are deleted, or until the handle is "
+"closed."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1867
+msgid ""
+"In the case where multiple callbacks are registered for a particular event "
+"class, all of the callbacks are called. The order in which multiple "
+"callbacks are called is not defined."
+msgstr ""
+
+#. type: =head3
+#: ../src/guestfs.pod:1871
+msgid "guestfs_delete_event_callback"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:1873
+#, no-wrap
+msgid ""
+" void guestfs_delete_event_callback (guestfs_h *g, int event_handle);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1875
+msgid ""
+"Delete a callback that was previously registered. C<event_handle> should be "
+"the integer that was returned by a previous call to "
+"C<guestfs_set_event_callback> on the same handle."
+msgstr ""
+
+#. type: =head3
+#: ../src/guestfs.pod:1879
+msgid "guestfs_event_callback"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:1881
+#, no-wrap
+msgid ""
+" typedef void (*guestfs_event_callback) (\n"
+" guestfs_h *g,\n"
+" void *opaque,\n"
+" uint64_t event,\n"
+" int event_handle,\n"
+" int flags,\n"
+" const char *buf, size_t buf_len,\n"
+" const uint64_t *array, size_t array_len);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1890
+msgid ""
+"This is the type of the event callback function that you have to provide."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1893
+msgid ""
+"The basic parameters are: the handle (C<g>), the opaque user pointer "
+"(C<opaque>), the event class (eg. C<GUESTFS_EVENT_PROGRESS>), the event "
+"handle, and C<flags> which in the current API you should ignore."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1897
+msgid ""
+"The remaining parameters contain the event payload (if any). Each event may "
+"contain a payload, which usually relates to the event class, but for future "
+"proofing your code should be written to handle any payload for any event "
+"class."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1902
+msgid ""
+"C<buf> and C<buf_len> contain a message buffer (if C<buf_len == 0>, then "
+"there is no message buffer). Note that this message buffer can contain "
+"arbitrary 8 bit data, including NUL bytes."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1906
+msgid ""
+"C<array> and C<array_len> is an array of 64 bit unsigned integers. At the "
+"moment this is only used for progress messages."
+msgstr ""
+
+#. type: =head3
+#: ../src/guestfs.pod:1909
+msgid "EXAMPLE: CAPTURING LOG MESSAGES"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1911
+msgid ""
+"One motivation for the generic event API was to allow GUI programs to "
+"capture debug and other messages. In libguestfs E<le> 1.8 these were sent "
+"unconditionally to C<stderr>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1915
+msgid ""
+"Events associated with log messages are: C<GUESTFS_EVENT_LIBRARY>, "
+"C<GUESTFS_EVENT_APPLIANCE> and C<GUESTFS_EVENT_TRACE>. (Note that error "
+"messages are not events; you must capture error messages separately)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1920
+msgid ""
+"Programs have to set up a callback to capture the classes of events of "
+"interest:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:1923
+#, no-wrap
+msgid ""
+" int eh =\n"
+" guestfs_set_event_callback\n"
+" (g, message_callback,\n"
+" GUESTFS_EVENT_LIBRARY|GUESTFS_EVENT_APPLIANCE|\n"
+" GUESTFS_EVENT_TRACE,\n"
+" 0, NULL) == -1)\n"
+" if (eh == -1) {\n"
+" // handle error in the usual way\n"
+" }\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1933
+msgid ""
+"The callback can then direct messages to the appropriate place. In this "
+"example, messages are directed to syslog:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:1936
+#, no-wrap
+msgid ""
+" static void\n"
+" message_callback (\n"
+" guestfs_h *g,\n"
+" void *opaque,\n"
+" uint64_t event,\n"
+" int event_handle,\n"
+" int flags,\n"
+" const char *buf, size_t buf_len,\n"
+" const uint64_t *array, size_t array_len)\n"
+" {\n"
+" const int priority = LOG_USER|LOG_INFO;\n"
+" if (buf_len > 0)\n"
+" syslog (priority, \"event 0x%lx: %s\", event, buf);\n"
+" }\n"
+"\n"
+msgstr ""
+
+# type: =head1
+#. type: =head1
+#: ../src/guestfs.pod:1951
+msgid "PRIVATE DATA AREA"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1953
+msgid ""
+"You can attach named pieces of private data to the libguestfs handle, fetch "
+"them by name, and walk over them, for the lifetime of the handle. This is "
+"called the private data area and is only available from the C API."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:1958
+msgid "To attach a named piece of data, use the following call:"
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:1960
+#, no-wrap
+msgid ""
+" void guestfs_set_private (guestfs_h *g, const char *key, void *data);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1962
+msgid ""
+"C<key> is the name to associate with this data, and C<data> is an arbitrary "
+"pointer (which can be C<NULL>). Any previous item with the same key is "
+"overwritten."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1966
+msgid ""
+"You can use any C<key> you want, but your key should I<not> start with an "
+"underscore character. Keys beginning with an underscore character are "
+"reserved for internal libguestfs purposes (eg. for implementing language "
+"bindings). It is recommended that you prefix the key with some unique "
+"string to avoid collisions with other users."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:1972
+msgid "To retrieve the pointer, use:"
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:1974
+#, no-wrap
+msgid ""
+" void *guestfs_get_private (guestfs_h *g, const char *key);\n"
+"\n"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:1976
+msgid ""
+"This function returns C<NULL> if either no data is found associated with "
+"C<key>, or if the user previously set the C<key>'s C<data> pointer to "
+"C<NULL>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1980
+msgid ""
+"Libguestfs does not try to look at or interpret the C<data> pointer in any "
+"way. As far as libguestfs is concerned, it need not be a valid pointer at "
+"all. In particular, libguestfs does I<not> try to free the data when the "
+"handle is closed. If the data must be freed, then the caller must either "
+"free it before calling L</guestfs_close> or must set up a close callback to "
+"do it (see L</GUESTFS_EVENT_CLOSE>)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1987
+msgid "To walk over all entries, use these two functions:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:1989
+#, no-wrap
+msgid ""
+" void *guestfs_first_private (guestfs_h *g, const char **key_rtn);\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:1991
+#, no-wrap
+msgid ""
+" void *guestfs_next_private (guestfs_h *g, const char **key_rtn);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1993
+msgid ""
+"C<guestfs_first_private> returns the first key, pointer pair (\"first\" does "
+"not have any particular meaning -- keys are not returned in any defined "
+"order). A pointer to the key is returned in C<*key_rtn> and the "
+"corresponding data pointer is returned from the function. C<NULL> is "
+"returned if there are no keys stored in the handle."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:1999
+msgid ""
+"C<guestfs_next_private> returns the next key, pointer pair. The return "
+"value of this function is also C<NULL> is there are no further entries to "
+"return."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2003
+msgid "Notes about walking over entries:"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2009
+msgid ""
+"You must not call C<guestfs_set_private> while walking over the entries."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2014
+msgid ""
+"The handle maintains an internal iterator which is reset when you call "
+"C<guestfs_first_private>. This internal iterator is invalidated when you "
+"call C<guestfs_set_private>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2020
+msgid "If you have set the data pointer associated with a key to C<NULL>, ie:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2022
+#, no-wrap
+msgid ""
+" guestfs_set_private (g, key, NULL);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2024
+msgid "then that C<key> is not returned when walking."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2028
+msgid ""
+"C<*key_rtn> is only valid until the next call to C<guestfs_first_private>, "
+"C<guestfs_next_private> or C<guestfs_set_private>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2034
+msgid ""
+"The following example code shows how to print all keys and data pointers "
+"that are associated with the handle C<g>:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2037
+#, no-wrap
+msgid ""
+" const char *key;\n"
+" void *data = guestfs_first_private (g, &key);\n"
+" while (data != NULL)\n"
+" {\n"
+" printf (\"key = %s, data = %p\\n\", key, data);\n"
+" data = guestfs_next_private (g, &key);\n"
+" }\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2045
+msgid ""
+"More commonly you are only interested in keys that begin with an application-"
+"specific prefix C<foo_>. Modify the loop like so:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2048
+#, no-wrap
+msgid ""
+" const char *key;\n"
+" void *data = guestfs_first_private (g, &key);\n"
+" while (data != NULL)\n"
+" {\n"
+" if (strncmp (key, \"foo_\", strlen (\"foo_\")) == 0)\n"
+" printf (\"key = %s, data = %p\\n\", key, data);\n"
+" data = guestfs_next_private (g, &key);\n"
+" }\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2057
+msgid ""
+"If you need to modify keys while walking, then you have to jump back to the "
+"beginning of the loop. For example, to delete all keys prefixed with "
+"C<foo_>:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2061
+#, no-wrap
+msgid ""
+" const char *key;\n"
+" void *data;\n"
+" again:\n"
+" data = guestfs_first_private (g, &key);\n"
+" while (data != NULL)\n"
+" {\n"
+" if (strncmp (key, \"foo_\", strlen (\"foo_\")) == 0)\n"
+" {\n"
+" guestfs_set_private (g, key, NULL);\n"
+" /* note that 'key' pointer is now invalid, and so is\n"
+" the internal iterator */\n"
+" goto again;\n"
+" }\n"
+" data = guestfs_next_private (g, &key);\n"
+" }\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2077
+msgid ""
+"Note that the above loop is guaranteed to terminate because the keys are "
+"being deleted, but other manipulations of keys within the loop might not "
+"terminate unless you also maintain an indication of which keys have been "
+"visited."
+msgstr ""
+
+# type: =end
+#. type: =end
+#: ../src/guestfs.pod:2082 ../src/guestfs.pod:2087
+msgid "html"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2084
+msgid ""
+"<!-- old anchor for the next section --> <a name="
+"\"state_machine_and_low_level_event_api\"/>"
+msgstr ""
+
+# type: =head1
+#. type: =head1
+#: ../src/guestfs.pod:2089
+msgid "ARCHITECTURE"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2091
+msgid ""
+"Internally, libguestfs is implemented by running an appliance (a special "
+"type of small virtual machine) using L<qemu(1)>. Qemu runs as a child "
+"process of the main program."
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:2095
+#, no-wrap
+msgid ""
+" ___________________\n"
+" / \\\n"
+" | main program |\n"
+" | |\n"
+" | | child process / appliance\n"
+" | | __________________________\n"
+" | | / qemu \\\n"
+" +-------------------+ RPC | +-----------------+ |\n"
+" | libguestfs <--------------------> guestfsd | |\n"
+" | | | +-----------------+ |\n"
+" \\___________________/ | | Linux kernel | |\n"
+" | +--^--------------+ |\n"
+" \\_________|________________/\n"
+" |\n"
+" _______v______\n"
+" / \\\n"
+" | Device or |\n"
+" | disk image |\n"
+" \\______________/\n"
+"\n"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2115
+msgid ""
+"The library, linked to the main program, creates the child process and hence "
+"the appliance in the L</guestfs_launch> function."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2118
+msgid ""
+"Inside the appliance is a Linux kernel and a complete stack of userspace "
+"tools (such as LVM and ext2 programs) and a small controlling daemon called "
+"L</guestfsd>. The library talks to L</guestfsd> using remote procedure "
+"calls (RPC). There is a mostly one-to-one correspondence between libguestfs "
+"API calls and RPC calls to the daemon. Lastly the disk image(s) are "
+"attached to the qemu process which translates device access by the "
+"appliance's Linux kernel into accesses to the image."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2127
+msgid ""
+"A common misunderstanding is that the appliance \"is\" the virtual machine. "
+"Although the disk image you are attached to might also be used by some "
+"virtual machine, libguestfs doesn't know or care about this. (But you will "
+"care if both libguestfs's qemu process and your virtual machine are trying "
+"to update the disk image at the same time, since these usually results in "
+"massive disk corruption)."
+msgstr ""
+
+# type: =head1
+#. type: =head1
+#: ../src/guestfs.pod:2134
+msgid "STATE MACHINE"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2136
+msgid "libguestfs uses a state machine to model the child process:"
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:2138
+#, no-wrap
+msgid ""
+" |\n"
+" guestfs_create\n"
+" |\n"
+" |\n"
+" ____V_____\n"
+" / \\\n"
+" | CONFIG |\n"
+" \\__________/\n"
+" ^ ^ ^ \\\n"
+" / | \\ \\ guestfs_launch\n"
+" / | _\\__V______\n"
+" / | / \\\n"
+" / | | LAUNCHING |\n"
+" / | \\___________/\n"
+" / | /\n"
+" / | guestfs_launch\n"
+" / | /\n"
+" ______ / __|____V\n"
+" / \\ ------> / \\\n"
+" | BUSY | | READY |\n"
+" \\______/ <------ \\________/\n"
+"\n"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2160
+msgid ""
+"The normal transitions are (1) CONFIG (when the handle is created, but there "
+"is no child process), (2) LAUNCHING (when the child process is booting up), "
+"(3) alternating between READY and BUSY as commands are issued to, and "
+"carried out by, the child process."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2165
+msgid ""
+"The guest may be killed by L</guestfs_kill_subprocess>, or may die "
+"asynchronously at any time (eg. due to some internal error), and that causes "
+"the state to transition back to CONFIG."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2169
+msgid ""
+"Configuration commands for qemu such as L</guestfs_add_drive> can only be "
+"issued when in the CONFIG state."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2172
+msgid ""
+"The API offers one call that goes from CONFIG through LAUNCHING to READY. "
+"L</guestfs_launch> blocks until the child process is READY to accept "
+"commands (or until some failure or timeout). L</guestfs_launch> internally "
+"moves the state from CONFIG to LAUNCHING while it is running."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2178
+msgid ""
+"API actions such as L</guestfs_mount> can only be issued when in the READY "
+"state. These API calls block waiting for the command to be carried out (ie. "
+"the state to transition to BUSY and then back to READY). There are no non-"
+"blocking versions, and no way to issue more than one command per handle at "
+"the same time."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2184
+msgid ""
+"Finally, the child process sends asynchronous messages back to the main "
+"program, such as kernel log messages. You can register a callback to "
+"receive these messages."
+msgstr ""
+
+# type: =head1
+#. type: =head1
+#: ../src/guestfs.pod:2188
+msgid "INTERNALS"
+msgstr ""
+
+# type: =head2
+#. type: =head2
+#: ../src/guestfs.pod:2190
+msgid "COMMUNICATION PROTOCOL"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2192
+msgid ""
+"Don't rely on using this protocol directly. This section documents how it "
+"currently works, but it may change at any time."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2195
+msgid ""
+"The protocol used to talk between the library and the daemon running inside "
+"the qemu virtual machine is a simple RPC mechanism built on top of XDR (RFC "
+"1014, RFC 1832, RFC 4506)."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2199
+msgid ""
+"The detailed format of structures is in C<src/guestfs_protocol.x> (note: "
+"this file is automatically generated)."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2202
+msgid ""
+"There are two broad cases, ordinary functions that don't have any C<FileIn> "
+"and C<FileOut> parameters, which are handled with very simple request/reply "
+"messages. Then there are functions that have any C<FileIn> or C<FileOut> "
+"parameters, which use the same request and reply messages, but they may also "
+"be followed by files sent using a chunked encoding."
+msgstr ""
+
+# type: =head3
+#. type: =head3
+#: ../src/guestfs.pod:2209
+msgid "ORDINARY FUNCTIONS (NO FILEIN/FILEOUT PARAMS)"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2211
+msgid "For ordinary functions, the request message is:"
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:2213
+#, no-wrap
+msgid ""
+" total length (header + arguments,\n"
+" but not including the length word itself)\n"
+" struct guestfs_message_header (encoded as XDR)\n"
+" struct guestfs_<foo>_args (encoded as XDR)\n"
+"\n"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2218
+msgid ""
+"The total length field allows the daemon to allocate a fixed size buffer "
+"into which it slurps the rest of the message. As a result, the total length "
+"is limited to C<GUESTFS_MESSAGE_MAX> bytes (currently 4MB), which means the "
+"effective size of any request is limited to somewhere under this size."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2224
+msgid ""
+"Note also that many functions don't take any arguments, in which case the "
+"C<guestfs_I<foo>_args> is completely omitted."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2227
+msgid ""
+"The header contains the procedure number (C<guestfs_proc>) which is how the "
+"receiver knows what type of args structure to expect, or none at all."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2231
+msgid ""
+"For functions that take optional arguments, the optional arguments are "
+"encoded in the C<guestfs_I<foo>_args> structure in the same way as ordinary "
+"arguments. A bitmask in the header indicates which optional arguments are "
+"meaningful. The bitmask is also checked to see if it contains bits set "
+"which the daemon does not know about (eg. if more optional arguments were "
+"added in a later version of the library), and this causes the call to be "
+"rejected."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2239
+msgid "The reply message for ordinary functions is:"
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:2241
+#, no-wrap
+msgid ""
+" total length (header + ret,\n"
+" but not including the length word itself)\n"
+" struct guestfs_message_header (encoded as XDR)\n"
+" struct guestfs_<foo>_ret (encoded as XDR)\n"
+"\n"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2246
+msgid ""
+"As above the C<guestfs_I<foo>_ret> structure may be completely omitted for "
+"functions that return no formal return values."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2249
+msgid ""
+"As above the total length of the reply is limited to C<GUESTFS_MESSAGE_MAX>."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2252
+msgid ""
+"In the case of an error, a flag is set in the header, and the reply message "
+"is slightly changed:"
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:2255
+#, no-wrap
+msgid ""
+" total length (header + error,\n"
+" but not including the length word itself)\n"
+" struct guestfs_message_header (encoded as XDR)\n"
+" struct guestfs_message_error (encoded as XDR)\n"
+"\n"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2260
+msgid ""
+"The C<guestfs_message_error> structure contains the error message as a "
+"string."
+msgstr ""
+
+# type: =head3
+#. type: =head3
+#: ../src/guestfs.pod:2263
+msgid "FUNCTIONS THAT HAVE FILEIN PARAMETERS"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2265
+msgid ""
+"A C<FileIn> parameter indicates that we transfer a file I<into> the guest. "
+"The normal request message is sent (see above). However this is followed by "
+"a sequence of file chunks."
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:2269
+#, no-wrap
+msgid ""
+" total length (header + arguments,\n"
+" but not including the length word itself,\n"
+" and not including the chunks)\n"
+" struct guestfs_message_header (encoded as XDR)\n"
+" struct guestfs_<foo>_args (encoded as XDR)\n"
+" sequence of chunks for FileIn param #0\n"
+" sequence of chunks for FileIn param #1 etc.\n"
+"\n"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2277
+msgid "The \"sequence of chunks\" is:"
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:2279
+#, no-wrap
+msgid ""
+" length of chunk (not including length word itself)\n"
+" struct guestfs_chunk (encoded as XDR)\n"
+" length of chunk\n"
+" struct guestfs_chunk (encoded as XDR)\n"
+" ...\n"
+" length of chunk\n"
+" struct guestfs_chunk (with data.data_len == 0)\n"
+"\n"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2287
+msgid ""
+"The final chunk has the C<data_len> field set to zero. Additionally a flag "
+"is set in the final chunk to indicate either successful completion or early "
+"cancellation."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2291
+msgid ""
+"At time of writing there are no functions that have more than one FileIn "
+"parameter. However this is (theoretically) supported, by sending the "
+"sequence of chunks for each FileIn parameter one after another (from left to "
+"right)."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2296
+msgid ""
+"Both the library (sender) I<and> the daemon (receiver) may cancel the "
+"transfer. The library does this by sending a chunk with a special flag set "
+"to indicate cancellation. When the daemon sees this, it cancels the whole "
+"RPC, does I<not> send any reply, and goes back to reading the next request."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2302
+msgid ""
+"The daemon may also cancel. It does this by writing a special word "
+"C<GUESTFS_CANCEL_FLAG> to the socket. The library listens for this during "
+"the transfer, and if it gets it, it will cancel the transfer (it sends a "
+"cancel chunk). The special word is chosen so that even if cancellation "
+"happens right at the end of the transfer (after the library has finished "
+"writing and has started listening for the reply), the \"spurious\" cancel "
+"flag will not be confused with the reply message."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2311
+msgid ""
+"This protocol allows the transfer of arbitrary sized files (no 32 bit "
+"limit), and also files where the size is not known in advance (eg. from "
+"pipes or sockets). However the chunks are rather small "
+"(C<GUESTFS_MAX_CHUNK_SIZE>), so that neither the library nor the daemon need "
+"to keep much in memory."
+msgstr ""
+
+# type: =head3
+#. type: =head3
+#: ../src/guestfs.pod:2317
+msgid "FUNCTIONS THAT HAVE FILEOUT PARAMETERS"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2319
+msgid ""
+"The protocol for FileOut parameters is exactly the same as for FileIn "
+"parameters, but with the roles of daemon and library reversed."
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:2322
+#, no-wrap
+msgid ""
+" total length (header + ret,\n"
+" but not including the length word itself,\n"
+" and not including the chunks)\n"
+" struct guestfs_message_header (encoded as XDR)\n"
+" struct guestfs_<foo>_ret (encoded as XDR)\n"
+" sequence of chunks for FileOut param #0\n"
+" sequence of chunks for FileOut param #1 etc.\n"
+"\n"
+msgstr ""
+
+# type: =head3
+#. type: =head3
+#: ../src/guestfs.pod:2330
+msgid "INITIAL MESSAGE"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2332
+msgid ""
+"When the daemon launches it sends an initial word (C<GUESTFS_LAUNCH_FLAG>) "
+"which indicates that the guest and daemon is alive. This is what L</"
+"guestfs_launch> waits for."
+msgstr ""
+
+# type: =head3
+#. type: =head3
+#: ../src/guestfs.pod:2336
+msgid "PROGRESS NOTIFICATION MESSAGES"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2338
+msgid ""
+"The daemon may send progress notification messages at any time. These are "
+"distinguished by the normal length word being replaced by "
+"C<GUESTFS_PROGRESS_FLAG>, followed by a fixed size progress message."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2342
+msgid ""
+"The library turns them into progress callbacks (see L</"
+"GUESTFS_EVENT_PROGRESS>) if there is a callback registered, or discards them "
+"if not."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2346
+msgid ""
+"The daemon self-limits the frequency of progress messages it sends (see "
+"C<daemon/proto.c:notify_progress>). Not all calls generate progress "
+"messages."
+msgstr ""
+
+# type: =head1
+#. type: =head1
+#: ../src/guestfs.pod:2350
+msgid "LIBGUESTFS VERSION NUMBERS"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2352
+msgid ""
+"Since April 2010, libguestfs has started to make separate development and "
+"stable releases, along with corresponding branches in our git repository. "
+"These separate releases can be identified by version number:"
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: ../src/guestfs.pod:2357
+#, no-wrap
+msgid ""
+" even numbers for stable: 1.2.x, 1.4.x, ...\n"
+" .-------- odd numbers for development: 1.3.x, 1.5.x, ...\n"
+" |\n"
+" v\n"
+" 1 . 3 . 5\n"
+" ^ ^\n"
+" | |\n"
+" | `-------- sub-version\n"
+" |\n"
+" `------ always '1' because we don't change the ABI\n"
+"\n"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2368
+msgid "Thus \"1.3.5\" is the 5th update to the development branch \"1.3\"."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2370
+msgid ""
+"As time passes we cherry pick fixes from the development branch and backport "
+"those into the stable branch, the effect being that the stable branch should "
+"get more stable and less buggy over time. So the stable releases are ideal "
+"for people who don't need new features but would just like the software to "
+"work."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2376
+msgid "Our criteria for backporting changes are:"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2382
+msgid ""
+"Documentation changes which don't affect any code are backported unless the "
+"documentation refers to a future feature which is not in stable."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2388
+msgid ""
+"Bug fixes which are not controversial, fix obvious problems, and have been "
+"well tested are backported."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2393
+msgid ""
+"Simple rearrangements of code which shouldn't affect how it works get "
+"backported. This is so that the code in the two branches doesn't get too "
+"far out of step, allowing us to backport future fixes more easily."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2399
+msgid ""
+"We I<don't> backport new features, new APIs, new tools etc, except in one "
+"exceptional case: the new feature is required in order to implement an "
+"important bug fix."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2405
+msgid ""
+"A new stable branch starts when we think the new features in development are "
+"substantial and compelling enough over the current stable branch to warrant "
+"it. When that happens we create new stable and development versions 1.N.0 "
+"and 1.(N+1).0 [N is even]. The new dot-oh release won't necessarily be so "
+"stable at this point, but by backporting fixes from development, that branch "
+"will stabilize over time."
+msgstr ""
+
+#. type: =head1
+#: ../src/guestfs.pod:2413
+msgid "EXTENDING LIBGUESTFS"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2415
+msgid "ADDING A NEW API ACTION"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2417
+msgid ""
+"Large amounts of boilerplate code in libguestfs (RPC, bindings, "
+"documentation) are generated, and this makes it easy to extend the "
+"libguestfs API."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2421
+msgid "To add a new API action there are two changes:"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2427
+msgid ""
+"You need to add a description of the call (name, parameters, return type, "
+"tests, documentation) to C<generator/generator_actions.ml>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2430
+msgid ""
+"There are two sorts of API action, depending on whether the call goes "
+"through to the daemon in the appliance, or is serviced entirely by the "
+"library (see L</ARCHITECTURE> above). L</guestfs_sync> is an example of the "
+"former, since the sync is done in the appliance. L</guestfs_set_trace> is "
+"an example of the latter, since a trace flag is maintained in the handle and "
+"all tracing is done on the library side."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2438
+msgid ""
+"Most new actions are of the first type, and get added to the "
+"C<daemon_functions> list. Each function has a unique procedure number used "
+"in the RPC protocol which is assigned to that action when we publish "
+"libguestfs and cannot be reused. Take the latest procedure number and "
+"increment it."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2444
+msgid ""
+"For library-only actions of the second type, add to the "
+"C<non_daemon_functions> list. Since these functions are serviced by the "
+"library and do not travel over the RPC mechanism to the daemon, these "
+"functions do not need a procedure number, and so the procedure number is set "
+"to C<-1>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2452
+msgid "Implement the action (in C):"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2454
+msgid ""
+"For daemon actions, implement the function C<do_E<lt>nameE<gt>> in the "
+"C<daemon/> directory."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2457
+msgid ""
+"For library actions, implement the function C<guestfs__E<lt>nameE<gt>> "
+"(note: double underscore) in the C<src/> directory."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2460
+msgid "In either case, use another function as an example of what to do."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2464
+msgid "After making these changes, use C<make> to compile."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2466
+msgid ""
+"Note that you don't need to implement the RPC, language bindings, manual "
+"pages or anything else. It's all automatically generated from the OCaml "
+"description."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2470
+msgid "ADDING TESTS FOR AN API ACTION"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2472
+msgid ""
+"You can supply zero or as many tests as you want per API call. The tests "
+"can either be added as part of the API description (C<generator/"
+"generator_actions.ml>), or in some rarer cases you may want to drop a script "
+"into C<regressions/>. Note that adding a script to C<regressions/> is "
+"slower, so if possible use the first method."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2478
+msgid ""
+"The following describes the test environment used when you add an API test "
+"in C<generator_actions.ml>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2481
+msgid "The test environment has 4 block devices:"
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2485
+msgid "C</dev/sda> 500MB"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2487
+msgid "General block device for testing."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2489
+msgid "C</dev/sdb> 50MB"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2491
+msgid ""
+"C</dev/sdb1> is an ext2 filesystem used for testing filesystem write "
+"operations."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2494
+msgid "C</dev/sdc> 10MB"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2496
+msgid "Used in a few tests where two block devices are needed."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2498
+msgid "C</dev/sdd>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2500
+msgid "ISO with fixed content (see C<images/test.iso>)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2504
+msgid ""
+"To be able to run the tests in a reasonable amount of time, the libguestfs "
+"appliance and block devices are reused between tests. So don't try testing "
+"L</guestfs_kill_subprocess> :-x"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2508
+msgid ""
+"Each test starts with an initial scenario, selected using one of the "
+"C<Init*> expressions, described in C<generator/generator_types.ml>. These "
+"initialize the disks mentioned above in a particular way as documented in "
+"C<generator_types.ml>. You should not assume anything about the previous "
+"contents of other disks that are not initialized."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2514
+msgid ""
+"You can add a prerequisite clause to any individual test. This is a run-"
+"time check, which, if it fails, causes the test to be skipped. Useful if "
+"testing a command which might not work on all variations of libguestfs "
+"builds. A test that has prerequisite of C<Always> means to run "
+"unconditionally."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2520
+msgid ""
+"In addition, packagers can skip individual tests by setting environment "
+"variables before running C<make check>."
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2523
+#, no-wrap
+msgid ""
+" SKIP_TEST_<CMD>_<NUM>=1\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2525
+msgid "eg: C<SKIP_TEST_COMMAND_3=1> skips test #3 of L</guestfs_command>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2527
+msgid "or:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2529
+#, no-wrap
+msgid ""
+" SKIP_TEST_<CMD>=1\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2531
+msgid "eg: C<SKIP_TEST_ZEROFREE=1> skips all L</guestfs_zerofree> tests."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2533
+msgid "Packagers can run only certain tests by setting for example:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2535
+#, no-wrap
+msgid ""
+" TEST_ONLY=\"vfs_type zerofree\"\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2537
+msgid ""
+"See C<capitests/tests.c> for more details of how these environment variables "
+"work."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2540
+msgid "DEBUGGING NEW API ACTIONS"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2542
+msgid "Test new actions work before submitting them."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2544
+msgid "You can use guestfish to try out new commands."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2546
+msgid ""
+"Debugging the daemon is a problem because it runs inside a minimal "
+"environment. However you can fprintf messages in the daemon to stderr, and "
+"they will show up if you use C<guestfish -v>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2550
+msgid "FORMATTING CODE AND OTHER CONVENTIONS"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2552
+msgid ""
+"Our C source code generally adheres to some basic code-formatting "
+"conventions. The existing code base is not totally consistent on this "
+"front, but we do prefer that contributed code be formatted similarly. In "
+"short, use spaces-not-TABs for indentation, use 2 spaces for each "
+"indentation level, and other than that, follow the K&R style."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2558
+msgid ""
+"If you use Emacs, add the following to one of one of your start-up files (e."
+"g., ~/.emacs), to help ensure that you get indentation right:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2561
+#, no-wrap
+msgid ""
+" ;;; In libguestfs, indent with spaces everywhere (not TABs).\n"
+" ;;; Exceptions: Makefile and ChangeLog modes.\n"
+" (add-hook 'find-file-hook\n"
+" '(lambda () (if (and buffer-file-name\n"
+" (string-match \"/libguestfs\\\\>\"\n"
+" (buffer-file-name))\n"
+" (not (string-equal mode-name \"Change Log\"))\n"
+" (not (string-equal mode-name \"Makefile\")))\n"
+" (setq indent-tabs-mode nil))))\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2571
+#, no-wrap
+msgid ""
+" ;;; When editing C sources in libguestfs, use this style.\n"
+" (defun libguestfs-c-mode ()\n"
+" \"C mode with adjusted defaults for use with libguestfs.\"\n"
+" (interactive)\n"
+" (c-set-style \"K&R\")\n"
+" (setq c-indent-level 2)\n"
+" (setq c-basic-offset 2))\n"
+" (add-hook 'c-mode-hook\n"
+" '(lambda () (if (string-match \"/libguestfs\\\\>\"\n"
+" (buffer-file-name))\n"
+" (libguestfs-c-mode))))\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2583
+msgid "Enable warnings when compiling (and fix any problems this finds):"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2586
+#, no-wrap
+msgid ""
+" ./configure --enable-gcc-warnings\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2588
+msgid "Useful targets are:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2590
+#, no-wrap
+msgid ""
+" make syntax-check # checks the syntax of the C code\n"
+" make check # runs the test suite\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2593
+msgid "DAEMON CUSTOM PRINTF FORMATTERS"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2595
+msgid ""
+"In the daemon code we have created custom printf formatters C<%Q> and C<%R>, "
+"which are used to do shell quoting."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2600
+msgid "%Q"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2602
+msgid ""
+"Simple shell quoted string. Any spaces or other shell characters are "
+"escaped for you."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2605
+msgid "%R"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2607
+msgid ""
+"Same as C<%Q> except the string is treated as a path which is prefixed by "
+"the sysroot."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2612 ../fish/guestfish.pod:240 ../fish/guestfish.pod:613
+msgid "For example:"
+msgstr ""
+
+#. type: verbatim
+#: ../src/guestfs.pod:2614
+#, no-wrap
+msgid ""
+" asprintf (&cmd, \"cat %R\", path);\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2616
+msgid "would produce C<cat /sysroot/some\\ path\\ with\\ spaces>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2618
+msgid ""
+"I<Note:> Do I<not> use these when you are passing parameters to the C<command"
+"{,r,v,rv}()> functions. These parameters do NOT need to be quoted because "
+"they are not passed via the shell (instead, straight to exec). You probably "
+"want to use the C<sysroot_path()> function however."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2624
+msgid "SUBMITTING YOUR NEW API ACTIONS"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2626
+msgid ""
+"Submit patches to the mailing list: L<http://www.redhat.com/mailman/listinfo/"
+"libguestfs> and CC to L<rjones@redhat.com>."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2630
+msgid "INTERNATIONALIZATION (I18N) SUPPORT"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2632
+msgid "We support i18n (gettext anyhow) in the library."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2634
+msgid ""
+"However many messages come from the daemon, and we don't translate those at "
+"the moment. One reason is that the appliance generally has all locale files "
+"removed from it, because they take up a lot of space. So we'd have to readd "
+"some of those, as well as copying our PO files into the appliance."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2640
+msgid ""
+"Debugging messages are never translated, since they are intended for the "
+"programmers."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2643
+msgid "SOURCE CODE SUBDIRECTORIES"
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2647 ../src/guestfs-actions.pod:5827
+#: ../fish/guestfish-actions.pod:3921
+msgid "C<appliance>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2649
+msgid "The libguestfs appliance, build scripts and so on."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2651
+msgid "C<capitests>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2653
+msgid "Automated tests of the C API."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2655
+msgid "C<cat>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2657
+msgid ""
+"The L<virt-cat(1)>, L<virt-filesystems(1)> and L<virt-ls(1)> commands and "
+"documentation."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2660
+msgid "C<caution>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2662
+msgid ""
+"Safety and liveness tests of components that libguestfs depends upon (not of "
+"libguestfs itself). Mainly this is for qemu and the kernel."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2665
+msgid "C<contrib>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2667
+msgid "Outside contributions, experimental parts."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2669
+msgid "C<daemon>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2671
+msgid ""
+"The daemon that runs inside the libguestfs appliance and carries out actions."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2674
+msgid "C<df>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2676
+msgid "L<virt-df(1)> command and documentation."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2678
+msgid "C<examples>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2680
+msgid "C API example code."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2682
+msgid "C<fish>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2684
+msgid ""
+"L<guestfish(1)>, the command-line shell, and various shell scripts built on "
+"top such as L<virt-copy-in(1)>, L<virt-copy-out(1)>, L<virt-tar-in(1)>, "
+"L<virt-tar-out(1)>."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2688
+msgid "C<fuse>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2690
+msgid ""
+"L<guestmount(1)>, FUSE (userspace filesystem) built on top of libguestfs."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2692
+msgid "C<generator>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2694
+msgid ""
+"The crucially important generator, used to automatically generate large "
+"amounts of boilerplate C code for things like RPC and bindings."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2697
+msgid "C<images>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2699
+msgid "Files used by the test suite."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2701
+msgid "Some \"phony\" guest images which we test against."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2703
+msgid "C<inspector>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2705
+msgid "L<virt-inspector(1)>, the virtual machine image inspector."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2707
+msgid "C<logo>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2709
+msgid "Logo used on the website. The fish is called Arthur by the way."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2711
+msgid "C<m4>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2713
+msgid "M4 macros used by autoconf."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2715
+msgid "C<po>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2717
+msgid "Translations of simple gettext strings."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2719
+msgid "C<po-docs>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2721
+msgid ""
+"The build infrastructure and PO files for translations of manpages and POD "
+"files. Eventually this will be combined with the C<po> directory, but that "
+"is rather complicated."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2725
+msgid "C<regressions>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2727
+msgid "Regression tests."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2729
+msgid "C<rescue>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2731
+msgid "L<virt-rescue(1)> command and documentation."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2733
+msgid "C<src>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2735
+msgid "Source code to the C library."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2737
+msgid "C<tools>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2739
+msgid "Command line tools written in Perl (L<virt-resize(1)> and many others)."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2741
+msgid "C<test-tool>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2743
+msgid ""
+"Test tool for end users to test if their qemu/kernel combination will work "
+"with libguestfs."
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2746
+msgid "C<csharp>"
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2748
+msgid "C<haskell>"
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2750
+msgid "C<java>"
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2752
+msgid "C<ocaml>"
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2754
+msgid "C<php>"
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2756
+msgid "C<perl>"
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2758
+msgid "C<python>"
+msgstr ""
+
+#. type: =item
+#: ../src/guestfs.pod:2760
+msgid "C<ruby>"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2762
+msgid "Language bindings."
+msgstr ""
+
+#. type: =head1
+#: ../src/guestfs.pod:2766
+msgid "LIMITS"
+msgstr ""
+
+# type: =head2
+#. type: =head2
+#: ../src/guestfs.pod:2768
+msgid "PROTOCOL LIMITS"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2770
+msgid ""
+"Internally libguestfs uses a message-based protocol to pass API calls and "
+"their responses to and from a small \"appliance\" (see L</INTERNALS> for "
+"plenty more detail about this). The maximum message size used by the "
+"protocol is slightly less than 4 MB. For some API calls you may need to be "
+"aware of this limit. The API calls which may be affected are individually "
+"documented, with a link back to this section of the documentation."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2778
+msgid ""
+"A simple call such as L</guestfs_cat> returns its result (the file data) in "
+"a simple string. Because this string is at some point internally encoded as "
+"a message, the maximum size that it can return is slightly under 4 MB. If "
+"the requested file is larger than this then you will get an error."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2784
+msgid ""
+"In order to transfer large files into and out of the guest filesystem, you "
+"need to use particular calls that support this. The sections L</UPLOADING> "
+"and L</DOWNLOADING> document how to do this."
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2788
+msgid ""
+"You might also consider mounting the disk image using our FUSE filesystem "
+"support (L<guestmount(1)>)."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2791
+msgid "MAXIMUM NUMBER OF DISKS"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2793
+msgid "When using virtio disks (the default) the current limit is B<25> disks."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2796
+msgid ""
+"Virtio itself consumes 1 virtual PCI slot per disk, and PCI is limited to 31 "
+"slots. However febootstrap only understands disks with names C</dev/vda> "
+"through C</dev/vdz> (26 letters) and it reserves one disk for its own "
+"purposes."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2801
+msgid ""
+"We are working to substantially raise this limit in future versions but it "
+"requires complex changes to qemu."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2804
+msgid ""
+"In future versions of libguestfs it should also be possible to \"hot plug\" "
+"disks (add and remove disks after calling L</guestfs_launch>). This also "
+"requires changes to qemu."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2808
+msgid "MAXIMUM NUMBER OF PARTITIONS PER DISK"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2810
+msgid "Virtio limits the maximum number of partitions per disk to B<15>."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2812
+msgid ""
+"This is because it reserves 4 bits for the minor device number (thus C</dev/"
+"vda>, and C</dev/vda1> through C</dev/vda15>)."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2815
+msgid ""
+"If you attach a disk with more than 15 partitions, the extra partitions are "
+"ignored by libguestfs."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2818
+msgid "MAXIMUM SIZE OF A DISK"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2820
+msgid "Probably the limit is between 2**63-1 and 2**64-1 bytes."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2822
+msgid ""
+"We have tested block devices up to 1 exabyte (2**60 or "
+"1,152,921,504,606,846,976 bytes) using sparse files backed by an XFS host "
+"filesystem."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2826
+msgid ""
+"Although libguestfs probably does not impose any limit, the underlying host "
+"storage will. If you store disk images on a host ext4 filesystem, then the "
+"maximum size will be limited by the maximum ext4 file size (currently 16 "
+"TB). If you store disk images as host logical volumes then you are limited "
+"by the maximum size of an LV."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2832
+msgid ""
+"For the hugest disk image files, we recommend using XFS on the host for "
+"storage."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2835
+msgid "MAXIMUM SIZE OF A PARTITION"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2837
+msgid ""
+"The MBR (ie. classic MS-DOS) partitioning scheme uses 32 bit sector "
+"numbers. Assuming a 512 byte sector size, this means that MBR cannot "
+"address a partition located beyond 2 TB on the disk."
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2841
+msgid ""
+"It is recommended that you use GPT partitions on disks which are larger than "
+"this size. GPT uses 64 bit sector numbers and so can address partitions "
+"which are theoretically larger than the largest disk we could support."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2846
+msgid "MAXIMUM SIZE OF A FILESYSTEM, FILES, DIRECTORIES"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2848
+msgid ""
+"This depends on the filesystem type. libguestfs itself does not impose any "
+"known limit. Consult Wikipedia or the filesystem documentation to find out "
+"what these limits are."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2852
+msgid "MAXIMUM UPLOAD AND DOWNLOAD"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2854
+msgid ""
+"The API functions L</guestfs_upload>, L</guestfs_download>, L</"
+"guestfs_tar_in>, L</guestfs_tar_out> and the like allow unlimited sized "
+"uploads and downloads."
+msgstr ""
+
+#. type: =head2
+#: ../src/guestfs.pod:2858
+msgid "INSPECTION LIMITS"
+msgstr ""
+
+#. type: textblock
+#: ../src/guestfs.pod:2860
+msgid ""
+"The inspection code has several arbitrary limits on things like the size of "
+"Windows Registry hive it will read, and the length of product name. These "
+"are intended to stop a malicious guest from consuming arbitrary amounts of "
+"memory and disk space on the host, and should not be reached in practice. "
+"See the source code for more information."
+msgstr ""
+
+# type: =head1
+#. type: =head1
+#: ../src/guestfs.pod:2866 ../fish/guestfish.pod:1015
+#: ../test-tool/libguestfs-test-tool.pod:82 ../tools/virt-edit.pl:476
+msgid "ENVIRONMENT VARIABLES"
+msgstr ""
+
+# type: =item
+#. type: =item
+#: ../src/guestfs.pod:2870 ../fish/guestfish.pod:1041
+msgid "LIBGUESTFS_APPEND"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2872 ../fish/guestfish.pod:1043
+msgid "Pass additional options to the guest kernel."
+msgstr ""
+
+# type: =item
+#. type: =item
+#: ../src/guestfs.pod:2874 ../fish/guestfish.pod:1045
+msgid "LIBGUESTFS_DEBUG"
+msgstr ""
+
+# type: textblock
+#. type: textblock
+#: ../src/guestfs.pod:2876
git.annexia.org / libguestfs.git / blobdiff