-#: ../fish/guestfish.pod:620
-#, no-wrap
-msgid ""
-" tar-out /etc - | tar tf -\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:622
-msgid ""
-"writes the tarball to stdout and then pipes that into the external \"tar\" "
-"command (see L</PIPES>)."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:625
-msgid ""
-"When using C<-> to read from stdin, the input is read up to the end of "
-"stdin. You can also use a special \"heredoc\"-like syntax to read up to "
-"some arbitrary end marker:"
-msgstr ""
-
-# type: verbatim
-#: ../fish/guestfish.pod:629
-#, no-wrap
-msgid ""
-" upload -<<END /foo\n"
-" input line 1\n"
-" input line 2\n"
-" input line 3\n"
-" END\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:635
-msgid ""
-"Any string of characters can be used instead of C<END>. The end marker must "
-"appear on a line of its own, without any preceeding or following characters "
-"(not even spaces)."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:639
-msgid ""
-"Note that the C<-E<lt>E<lt>> syntax only applies to parameters used to "
-"upload local files (so-called \"FileIn\" parameters in the generator)."
-msgstr ""
-
-# type: =head1
-#: ../fish/guestfish.pod:642
-msgid "EXIT ON ERROR BEHAVIOUR"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:644
-msgid ""
-"By default, guestfish will ignore any errors when in interactive mode (ie. "
-"taking commands from a human over a tty), and will exit on the first error "
-"in non-interactive mode (scripts, commands given on the command line)."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:649
-msgid ""
-"If you prefix a command with a I<-> character, then that command will not "
-"cause guestfish to exit, even if that (one) command returns an error."
-msgstr ""
-
-# type: =head1
-#: ../fish/guestfish.pod:653
-msgid "REMOTE CONTROL GUESTFISH OVER A SOCKET"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:655
-msgid ""
-"Guestfish can be remote-controlled over a socket. This is useful "
-"particularly in shell scripts where you want to make several different "
-"changes to a filesystem, but you don't want the overhead of starting up a "
-"guestfish process each time."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:660
-msgid "Start a guestfish server process using:"
-msgstr ""
-
-# type: verbatim
-#: ../fish/guestfish.pod:662
-#, no-wrap
-msgid ""
-" eval `guestfish --listen`\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:664
-msgid "and then send it commands by doing:"
-msgstr ""
-
-# type: verbatim
-#: ../fish/guestfish.pod:666
-#, no-wrap
-msgid ""
-" guestfish --remote cmd [...]\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:668
-msgid "To cause the server to exit, send it the exit command:"
-msgstr ""
-
-# type: verbatim
-#: ../fish/guestfish.pod:670
-#, no-wrap
-msgid ""
-" guestfish --remote exit\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:672
-msgid ""
-"Note that the server will normally exit if there is an error in a command. "
-"You can change this in the usual way. See section L</EXIT ON ERROR "
-"BEHAVIOUR>."
-msgstr ""
-
-# type: =head2
-#: ../fish/guestfish.pod:676
-msgid "CONTROLLING MULTIPLE GUESTFISH PROCESSES"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:678
-msgid ""
-"The C<eval> statement sets the environment variable C<$GUESTFISH_PID>, which "
-"is how the I<--remote> option knows where to send the commands. You can "
-"have several guestfish listener processes running using:"
-msgstr ""
-
-# type: verbatim
-#: ../fish/guestfish.pod:682
-#, no-wrap
-msgid ""
-" eval `guestfish --listen`\n"
-" pid1=$GUESTFISH_PID\n"
-" eval `guestfish --listen`\n"
-" pid2=$GUESTFISH_PID\n"
-" ...\n"
-" guestfish --remote=$pid1 cmd\n"
-" guestfish --remote=$pid2 cmd\n"
-"\n"
-msgstr ""
-
-# type: =head2
-#: ../fish/guestfish.pod:690
-msgid "REMOTE CONTROL DETAILS"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:692
-msgid ""
-"Remote control happens over a Unix domain socket called C</tmp/.guestfish-"
-"$UID/socket-$PID>, where C<$UID> is the effective user ID of the process, "
-"and C<$PID> is the process ID of the server."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:696
-msgid "Guestfish client and server versions must match exactly."
-msgstr ""
-
-# type: =head1
-#: ../fish/guestfish.pod:698
-msgid "PREPARED DISK IMAGES"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:700
-msgid ""
-"Use the I<-N type> or I<--new type> parameter to select one of a set of "
-"preformatted disk images that guestfish can make for you to save typing. "
-"This is particularly useful for testing purposes. This option is used "
-"instead of the I<-a> option, and like I<-a> can appear multiple times (and "
-"can be mixed with I<-a>)."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:706
-msgid ""
-"The new disk is called C<test1.img> for the first I<-N>, C<test2.img> for "
-"the second and so on. Existing files in the current directory are "
-"I<overwritten>."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:710
-msgid ""
-"The type briefly describes how the disk should be sized, partitioned, how "
-"filesystem(s) should be created, and how content should be added. "
-"Optionally the type can be followed by extra parameters, separated by C<:> "
-"(colon) characters. For example, I<-N fs> creates a default 100MB, sparsely-"
-"allocated disk, containing a single partition, with the partition formatted "
-"as ext2. I<-N fs:ext4:1G> is the same, but for an ext4 filesystem on a 1GB "
-"disk instead."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:718
-msgid "To list the available types and any extra parameters they take, run:"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:722
-msgid ""
-"Note that the prepared filesystem is not mounted. You would usually have to "
-"use the C<mount /dev/sda1 /> command or add the I<-m /dev/sda1> option."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:726
-msgid ""
-"If any I<-N> or I<--new> options are given, the guest is automatically "
-"launched."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:731
-msgid "Create a 100MB disk with an ext4-formatted partition:"
-msgstr ""
-
-# type: verbatim
-#: ../fish/guestfish.pod:733
-#, no-wrap
-msgid ""
-" guestfish -N fs:ext4\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:735
-msgid "Create a 32MB disk with a VFAT-formatted partition, and mount it:"
-msgstr ""
-
-# type: verbatim
-#: ../fish/guestfish.pod:737
-#, no-wrap
-msgid ""
-" guestfish -N fs:vfat:32M -m /dev/sda1\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:739
-msgid "Create a blank 200MB disk:"
-msgstr ""
-
-# type: verbatim
-#: ../fish/guestfish.pod:741
-#, no-wrap
-msgid ""
-" guestfish -N disk:200M\n"
-"\n"
-msgstr ""
-
-# type: =head1
-#: ../fish/guestfish.pod:743
-msgid "PROGRESS BARS"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:745
-msgid ""
-"Some (not all) long-running commands send progress notification messages as "
-"they are running. Guestfish turns these messages into progress bars."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:749
-msgid ""
-"When a command that supports progress bars takes longer than two seconds to "
-"run, and if progress bars are enabled, then you will see one appearing below "
-"the command:"
-msgstr ""
-
-# type: verbatim
-#: ../fish/guestfish.pod:753
-#, no-wrap
-msgid ""
-" ><fs> copy-size /large-file /another-file 2048M\n"
-" / 10% [#####-----------------------------------------] 00:30\n"
-"\n"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:756
-msgid ""
-"The spinner on the left hand side moves round once for every progress "
-"notification received from the backend. This is a (reasonably) golden "
-"assurance that the command is \"doing something\" even if the progress bar "
-"is not moving, because the command is able to send the progress "
-"notifications. When the bar reaches 100% and the command finishes, the "
-"spinner disappears."
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:763
-msgid ""
-"Progress bars are enabled by default when guestfish is used interactively. "
-"You can enable them even for non-interactive modes using I<--progress-bars>, "
-"and you can disable them completely using I<--no-progress-bars>."
-msgstr ""
-
-# type: =head1
-#: ../fish/guestfish.pod:768
-msgid "GUESTFISH COMMANDS"
-msgstr ""
-
-# type: textblock
-#: ../fish/guestfish.pod:770
-msgid ""
-"The commands in this section are guestfish convenience commands, in other "
-"words, they are not part of the L<guestfs(3)> API."
-msgstr ""
-
-# type: =head2
-#: ../fish/guestfish.pod:773
-msgid "alloc | allocate"
-msgstr ""
-
-# type: verbatim
-#: ../fish/guestfish.pod:775