+#: tools/virt-resize.pl:822
+#, perl-brace-format
+msgid "{p}: new size is zero or negative\n"
+msgstr "{p}: nowy rozmiar wynosi zero lub jest ujemny\n"
+
+#: tools/virt-resize.pl:845
+#, perl-brace-format
+msgid ""
+"{p}: cannot make this partition smaller because it contains a\n"
+"filesystem, physical volume or other content that is larger than the new "
+"size.\n"
+"You have to resize the content first, see virt-resize(1).\n"
+msgstr ""
+"{p}: nie można zmniejszyć tej partycji, ponieważ zawiera ona system plików,\n"
+"wolumin fizyczny lub inną zawartość, która jest większa niż nowy rozmiar.\n"
+"Należy najpierw zmienić rozmiar zawartości, w tym celu proszę zobaczyć "
+"stronę podręcznika virt-resize(1).\n"
+
+#: tools/virt-resize.pl:861
+msgid "virt-resize: you cannot use options --expand and --shrink together\n"
+msgstr ""
+"virt-resize: nie można używać razem opcji --expand i --shrink together\n"
+
+#: tools/virt-resize.pl:910
+#, perl-brace-format
+msgid ""
+"virt-resize: error: cannot use --expand when there is no surplus space to\n"
+"expand into. You need to make the target disk larger by at least {h}.\n"
+msgstr ""
+"virt-resize: błąd: nie można użyć opcji --expand, kiedy nie ma miejsca na\n"
+"rozszerzenie. Należy zwiększyć dysk docelowy o co najmniej {h}.\n"
+
+#: tools/virt-resize.pl:925
+msgid ""
+"virt-resize: error: cannot use --shrink because there is no deficit\n"
+"(see 'deficit' in the virt-resize(1) man page)\n"
+msgstr ""
+"virt-resize: błąd: nie można użyć opcji --shrink, ponieważ brak deficytu\n"
+"(proszę zobaczyć \"deficit\" na stronie podręcznika virt-resize(1)).\n"
+
+#: tools/virt-resize.pl:940
+msgid "Summary of changes:\n"
+msgstr "Podsumowanie zmian:\n"
+
+#: tools/virt-resize.pl:944
+#, perl-brace-format
+msgid "{p}: partition will be ignored\n"
+msgstr "{p}: partycja zostanie zignorowana\n"
+
+#: tools/virt-resize.pl:946
+#, perl-brace-format
+msgid "{p}: partition will be deleted\n"
+msgstr "{p}: partycja zostanie usunięta\n"
+
+#: tools/virt-resize.pl:948
+#, perl-brace-format
+msgid "{p}: partition will be resized from {oldsize} to {newsize}\n"
+msgstr "{p}: rozmiar partycji zostanie zmieniony z {oldsize} do {newsize}\n"
+
+#: tools/virt-resize.pl:953
+#, perl-brace-format
+msgid "{p}: content will be expanded using the '{meth}' method\n"
+msgstr "{p}: zawartość zostanie rozszerzona używając metody \"{meth}\"\n"
+
+#: tools/virt-resize.pl:958
+#, perl-brace-format
+msgid "{p}: partition will be left alone\n"
+msgstr "{p}: partycja zostanie pozostawiona bez zmian\n"
+
+#: tools/virt-resize.pl:963
+#, perl-brace-format
+msgid "{n}: LV will be expanded to maximum size\n"
+msgstr "{n}: wolumin logiczny zostanie rozszerzony do maksymalnego rozmiaru\n"
+
+#: tools/virt-resize.pl:969
+#, perl-brace-format
+msgid "{n}: content will be expanded using the '{meth}' method\n"
+msgstr "{n}: zawartość zostanie rozszerzona używając metody \"{meth}\"\n"
+
+#: tools/virt-resize.pl:976
+#, perl-brace-format
+msgid "There is a surplus of {spl} bytes ({h}).\n"
+msgstr "Istnieje nadmiar {spl} bajtów ({h}).\n"
+
+#: tools/virt-resize.pl:981
+msgid "An extra partition will be created for the surplus.\n"
+msgstr "Dodatkowa partycja zostanie utworzona dla nadmiarowego miejsca.\n"
+
+#: tools/virt-resize.pl:983
+msgid ""
+"The surplus space is not large enough for an extra partition to be created\n"
+"and so it will just be ignored.\n"
+msgstr ""
+"Nadmiarowe miejsce nie jest dostatecznie duże do utworzenia dodatkowej\n"
+"partycji, więc zostanie zignorowane.\n"
+
+#: tools/virt-resize.pl:986
+msgid ""
+"The surplus space will be ignored. Run a partitioning program in the guest\n"
+"to partition this extra space if you want.\n"
+msgstr ""
+"Nadmiarowe miejsce zostanie zignorowane. Można uruchomić program\n"
+"partycjonowania w gościu, aby partycjonować te dodatkowe miejsce w razie\n"
+"potrzeby.\n"
+
+#: tools/virt-resize.pl:989
+#, perl-brace-format
+msgid ""
+"virt-resize: error: there is a deficit of {def} bytes ({h}).\n"
+"You need to make the target disk larger by at least this amount,\n"
+"or adjust your resizing requests.\n"
+msgstr ""
+"virt-resize: błąd: istnieje deficyt {def} bajtów ({h}).\n"
+"Należy zwiększyć dysk docelowy co najmniej o tę ilość lub dostosować\n"
+"żądania zmiany rozmiaru.\n"
+
+#: tools/virt-resize.pl:1030
+msgid "virt-resize: source disk does not have a first partition\n"
+msgstr "virt-resize: dysk źródłowy nie posiada pierwszej partycji\n"
+
+#: tools/virt-resize.pl:1126
+#, perl-brace-format
+msgid "Copying {p} ..."
+msgstr "Kopiowanie {p}..."
+
+#: tools/virt-resize.pl:1133
+msgid "done"
+msgstr "ukończono"
+
+#: tools/virt-resize.pl:1191 tools/virt-resize.pl:1249
+#, perl-brace-format
+msgid "Expanding {p} using the '{meth}' method\n"
+msgstr "Rozszerzanie {p} używając metody \"{meth}\"\n"
+
+#: tools/virt-tar.pl:162 tools/virt-tar.pl:169
+msgid "virt-tar: extract/upload mode specified twice on the command line\n"
+msgstr "virt-tar: wydobywa/wysyła tryb podany dwukrotnie w wierszu poleceń\n"
+
+#: tools/virt-tar.pl:190
+msgid "virt-tar: no image, VM names, directory or filename given"
+msgstr ""
+"virt-tar: nie podano obrazu, nazw maszyn wirtualnych, katalogu lub nazwy "
+"pliku"
+
+#: tools/virt-tar.pl:193
+msgid "virt-tar: either -x or -u must be specified on the command line\n"
+msgstr "virt-tar: należy podać opcję -x lub -u w wierszu poleceń\n"
+
+#: tools/virt-tar.pl:204
+#, perl-brace-format
+msgid "virt-tar: {tarball}: file not found\n"
+msgstr "virt-tar: {tarball}: nie odnaleziono pliku\n"
+
+#: tools/virt-tar.pl:207
+#, perl-brace-format
+msgid "virt-tar: {dir}: directory name must start with '/' character\n"
+msgstr "virt-tar: {dir}: nazwa katalogu musi zaczynać się od znaku \"/\"\n"
+
+#: tools/virt-tar.pl:229
+msgid "multiboot operating systems are not supported by virt-tar\n"
+msgstr ""
+"systemy operacyjne \"multiboot\" nie są obsługiwane przez program virt-tar\n"
+
+#: tools/virt-win-reg.pl:259
+msgid "no libvirt domain name or disk image given\n"
+msgstr "nie podano nazwy domeny libvirt lub obrazu dysku\n"
+
+#: tools/virt-win-reg.pl:283
+msgid "multiboot operating systems are not supported by virt-win-reg"
+msgstr ""
+"systemy operacyjne \"multiboot\" nie są obsługiwane przez program virt-win-"
+"reg"
+
+#: tools/virt-win-reg.pl:297
+msgid ""
+"expecting 1 or 2 more parameters, subkey path and optionally the value to "
+"export\n"
+msgstr ""
+"oczekiwano jednego lub dwóch parametrów, ścieżki do podklucza i opcjonalnie "
+"wartości do wyeksportowania\n"
+
+#: tools/virt-win-reg.pl:408
+#, perl-brace-format
+msgid "virt-win-reg: {p}: not a supported Windows Registry path\n"
+msgstr ""
+"virt-win-reg: {p}: nie jest obsługiwaną ścieżką rejestru systemu Windows\n"
+
+#: tools/virt-win-reg.pl:426 tools/virt-win-reg.pl:449
+#, perl-brace-format
+msgid "virt-win-reg: {p}: file not found in guest: {err}\n"
+msgstr "virt-win-reg: {p}: nie odnaleziono pliku w gościu: {err}\n"
+
+#: tools/virt-win-reg.pl:433
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not download registry file: {err}\n"
+msgstr "virt-win-reg: {p}: nie można pobrać pliku rejestru: {err}\n"
+
+#: tools/virt-win-reg.pl:456
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not upload registry file: {err}\n"
+msgstr "virt-win-reg: {p}: nie można wysłać pliku rejestru: {err}\n"
+
+#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
+#~ msgstr ""
+#~ "nie można odnaleźć %s lub %s w LIBGUESTFS_PATH (bieżąca ścieżka = %s)"
+
+#~ msgid "failed to connect to vmchannel socket"
+#~ msgstr ""
+#~ "połączenie się z gniazdem kanału maszyny wirtualnej nie powiodło się"
+
+#~ msgid ""
+#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
+#~ "selinux\n"
+#~ msgstr ""
+#~ "%s: nie można użyć opcji -i z -a, -m, -N, --listen, --remote lub --"
+#~ "selinux\n"
+
+#~ msgid "%s: -i requires a libvirt domain or path(s) to disk image(s)\n"
+#~ msgstr "%s: -i wymaga domeny libvirt lub ścieżek do obrazów dysków\n"
+
+#~ msgid "returning non-canonical architecture type '{arch}'"
+#~ msgstr "zwracanie niekanonicznego typu architektury \"{arch}\""
+
+#~ msgid "cpio command failed: {error}"
+#~ msgstr "polecenie cpio nie powiodło się: {error}"
+
+#~ msgid "file_architecture: no known binaries found in initrd image: {path}"
+#~ msgstr ""
+#~ "file_architecture: nie odnaleziono znanych plików binarnych w obrazie "
+#~ "initrd: {path}"