+
+#: tools/virt-edit.pl:169
+msgid "virt-edit: no image, VM names or filenames to edit given"
+msgstr ""
+
+#: tools/virt-edit.pl:185 tools/virt-tar.pl:243 tools/virt-win-reg.pl:217
+#, perl-brace-format
+msgid ""
+"{prog}: No operating system could be detected inside this disk image.\n"
+"\n"
+"This may be because the file is not a disk image, or is not a virtual "
+"machine\n"
+"image, or because the OS type is not understood by libguestfs.\n"
+"\n"
+"If you feel this is an error, please file a bug report including as much\n"
+"information about the disk image as possible.\n"
+msgstr ""
+
+#: tools/virt-edit.pl:189 tools/virt-tar.pl:247 tools/virt-win-reg.pl:221
+#, perl-brace-format
+msgid "{prog}: multiboot operating systems are not supported.\n"
+msgstr ""
+
+#: tools/virt-edit.pl:221
+msgid "File not changed.\n"
+msgstr ""
+
+#: tools/virt-list-filesystems.pl:142
+msgid "virt-list-filesystems: no image or VM name given"
+msgstr ""
+
+#: tools/virt-list-partitions.pl:152
+msgid "virt-list-partitions: no image or VM name given"
+msgstr ""
+
+#: tools/virt-make-fs.pl:291
+msgid "virt-make-fs input output\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:321
+msgid "unexpected output from 'du' command"
+msgstr ""
+
+#: tools/virt-make-fs.pl:333 tools/virt-make-fs.pl:347
+#: tools/virt-make-fs.pl:458
+#, perl-brace-format
+msgid "{f}: unknown input format: {fmt}\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:391
+#, perl-brace-format
+msgid "virt-make-fs: cannot parse size parameter: {sz}\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:406
+#, fuzzy
+msgid ""
+"qemu-img create: failed to create disk image, see earlier error messages\n"
+msgstr "guestfs_launch ବିଫଳ ହୋଇଛି, ପୂର୍ବର ତ୍ରୁଟି ସନ୍ଦେଶଗୁଡ଼ିକୁ ଦେଖନ୍ତୁ"
+
+#: tools/virt-make-fs.pl:417
+msgid "virt-make-fs: NTFS support was disabled when libguestfs was compiled\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:442
+#, fuzzy
+msgid "tar: failed, see earlier messages\n"
+msgstr "guestfs_launch ବିଫଳ ହୋଇଛି, ପୂର୍ବର ତ୍ରୁଟି ସନ୍ଦେଶଗୁଡ଼ିକୁ ଦେଖନ୍ତୁ"
+
+#: tools/virt-make-fs.pl:464
+#, fuzzy
+msgid "uncompress command failed, see earlier messages\n"
+msgstr "guestfs_launch ବିଫଳ ହୋଇଛି, ପୂର୍ବର ତ୍ରୁଟି ସନ୍ଦେଶଗୁଡ଼ିକୁ ଦେଖନ୍ତୁ"
+
+#: tools/virt-make-fs.pl:499
+msgid ""
+"virt-make-fs: error copying contents into filesystem\n"
+"An error here usually means that the program did not estimate the\n"
+"filesystem size correctly. Please read the BUGS section of the manpage.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:33
+msgid "virt-resize: sorry this program does not work on a 32 bit host\n"
+msgstr ""
+
+#: tools/virt-resize.pl:581
+#, fuzzy, perl-brace-format
+msgid "virt-resize: {file}: does not exist or is not readable\n"
+msgstr "ଦ୍ୱୀମିକ '%s' ଅବସ୍ଥିତ ନାହିଁ ଅଥବା ନିଷ୍ପାଦନ ଯୋଗ୍ୟ ନୁହଁ\n"
+
+#: tools/virt-resize.pl:583
+#, perl-brace-format
+msgid ""
+"virt-resize: {file}: does not exist or is not writable\n"
+"You have to create the destination disk before running this program.\n"
+"Please read the virt-resize(1) manpage for more information.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:663 tools/virt-resize.pl:666
+#, perl-brace-format
+msgid ""
+"virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n"
+msgstr ""
+
+#: tools/virt-resize.pl:682 tools/virt-resize.pl:694
+msgid "virt-resize: short read"
+msgstr ""
+
+#: tools/virt-resize.pl:828
+#, fuzzy, perl-brace-format
+msgid "virt-resize: no logical volume called {n}\n"
+msgstr "ଗୋଟିଏ LVM ତାର୍କିକ ଭଲ୍ୟୁମର ଆକାର ପରିବର୍ତ୍ତନ କରନ୍ତୁ"
+
+#: tools/virt-resize.pl:848
+#, perl-brace-format
+msgid ""
+"{p}: partition not found in the source disk image, when using the '{opt}' "
+"command line option\n"
+msgstr ""
+
+#: tools/virt-resize.pl:854
+#, perl-brace-format
+msgid ""
+"{p}: partition ignored, you cannot use it in another command line argument\n"
+msgstr ""
+
+#: tools/virt-resize.pl:858
+#, perl-brace-format
+msgid ""
+"{p}: partition deleted, you cannot use it in another command line argument\n"
+msgstr ""
+
+#: tools/virt-resize.pl:900
+#, perl-brace-format
+msgid "{p}: this partition has already been marked for resizing\n"
+msgstr ""
+
+#: tools/virt-resize.pl:908
+#, perl-brace-format
+msgid "{p}: missing size field in {o} option\n"
+msgstr ""
+
+#: tools/virt-resize.pl:925
+#, perl-brace-format
+msgid "{p}: {f}: cannot parse size field\n"
+msgstr ""
+
+#: tools/virt-resize.pl:930
+#, perl-brace-format
+msgid "{p}: new size is zero or negative\n"
+msgstr ""
+
+#: tools/virt-resize.pl:953
+#, perl-brace-format
+msgid ""
+"{p}: cannot make this partition smaller because it contains a\n"
+"filesystem, physical volume or other content that is larger than the new "
+"size.\n"
+"You have to resize the content first, see virt-resize(1).\n"
+msgstr ""
+
+#: tools/virt-resize.pl:969
+msgid "virt-resize: you cannot use options --expand and --shrink together\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1018
+#, perl-brace-format
+msgid ""
+"virt-resize: error: cannot use --expand when there is no surplus space to\n"
+"expand into. You need to make the target disk larger by at least {h}.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1033
+msgid ""
+"virt-resize: error: cannot use --shrink because there is no deficit\n"
+"(see 'deficit' in the virt-resize(1) man page)\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1048
+msgid "Summary of changes:\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1052
+#, perl-brace-format
+msgid "{p}: partition will be ignored\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1054
+#, perl-brace-format
+msgid "{p}: partition will be deleted\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1056
+#, perl-brace-format
+msgid "{p}: partition will be resized from {oldsize} to {newsize}\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1061
+#, perl-brace-format
+msgid "{p}: content will be expanded using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1066
+#, perl-brace-format
+msgid "{p}: partition will be left alone\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1071
+#, perl-brace-format
+msgid "{n}: LV will be expanded to maximum size\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1077
+#, perl-brace-format
+msgid "{n}: content will be expanded using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1084
+#, perl-brace-format
+msgid "There is a surplus of {spl} bytes ({h}).\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1089
+msgid "An extra partition will be created for the surplus.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1091
+msgid ""
+"The surplus space is not large enough for an extra partition to be created\n"
+"and so it will just be ignored.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1094
+msgid ""
+"The surplus space will be ignored. Run a partitioning program in the guest\n"
+"to partition this extra space if you want.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1097
+#, perl-brace-format
+msgid ""
+"virt-resize: error: there is a deficit of {def} bytes ({h}).\n"
+"You need to make the target disk larger by at least this amount,\n"
+"or adjust your resizing requests.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1114
+msgid "virt-resize: source disk does not have a first partition\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1209
+#, perl-brace-format
+msgid "Copying {p} ...\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1272 tools/virt-resize.pl:1330
+#, perl-brace-format
+msgid "Expanding {p} using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-tar.pl:183 tools/virt-tar.pl:190
+msgid "virt-tar: extract/upload mode specified twice on the command line\n"
+msgstr ""
+
+#: tools/virt-tar.pl:212
+msgid "virt-tar: no image, VM names, directory or filename given"
+msgstr ""
+
+#: tools/virt-tar.pl:215
+msgid "virt-tar: either -x or -u must be specified on the command line\n"
+msgstr ""
+
+#: tools/virt-tar.pl:226
+#, perl-brace-format
+msgid "virt-tar: {tarball}: file not found\n"
+msgstr ""
+
+#: tools/virt-tar.pl:229
+#, perl-brace-format
+msgid "virt-tar: {dir}: directory name must start with '/' character\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:201
+msgid "no libvirt domain name or disk image given\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:240
+msgid ""
+"expecting 1 or 2 more parameters, subkey path and optionally the value to "
+"export\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:351
+#, perl-brace-format
+msgid "virt-win-reg: {p}: not a supported Windows Registry path\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:368 tools/virt-win-reg.pl:390
+#, perl-brace-format
+msgid "virt-win-reg: {p}: file not found in guest: {err}\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:375
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not download registry file: {err}\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:397
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not upload registry file: {err}\n"
+msgstr ""
+
+#, fuzzy
+#~ msgid "failed to create temporary cache directory: %m"
+#~ msgstr "ଗୋଟିଏ ଅସ୍ଥାୟୀ ଡିରେକ୍ଟୋରୀ ନିର୍ମାଣ କରନ୍ତୁ"
+
+#, fuzzy
+#~ msgid "error renaming temporary cache directory: %m"
+#~ msgstr "ଗୋଟିଏ ଅସ୍ଥାୟୀ ଡିରେକ୍ଟୋରୀ ନିର୍ମାଣ କରନ୍ତୁ"
+
+#, fuzzy
+#~ msgid "virt-df: cannot use -h and --csv options together\n"
+#~ msgstr "%s: --listen ଏବଂ --file ବିକଳ୍ପଗୁଡ଼ିକୁ ଏକା ସମୟରେ ବ୍ୟବହାର କରିପାରିବେ ନାହିଁ\n"
+
+#, fuzzy
+#~ msgid " Mountpoints:\n"
+#~ msgstr "ସ୍ଥାପନ ବିନ୍ଦୁଗୁଡ଼ିକୁ ଦର୍ଶାନ୍ତୁ"
+
+#, fuzzy
+#~ msgid " Filesystems:\n"
+#~ msgstr "ଗୋଟିଏ ଫାଇଲ ତନ୍ତ୍ର ତିଆରି କରନ୍ତୁ"
+
+#~ msgid "allocate an image"
+#~ msgstr "ଗୋଟିଏ ପ୍ରତିଛବିକୁ ବାଣ୍ଟନ୍ତୁ"
+
+#~ msgid "edit a file in the image"
+#~ msgstr "ପ୍ରତିଛବିରେ ଗୋଟିଏ ଫାଇଲକୁ ସମ୍ପାଦନ କରନ୍ତୁ"
+
+#~ msgid "view a file in the pager"
+#~ msgstr "ପେଜରରେ ଗୋଟିଏ ଫାଇଲକୁ ଦେଖନ୍ତୁ"
+
+#~ msgid ""
+#~ "echo - display a line of text\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " This echos the parameters to the terminal.\n"
+#~ msgstr ""
+#~ "echo - ପାଠ୍ୟ ଧାଡ଼ି ଦର୍ଶାନ୍ତୁ\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " ଏହା ଟର୍ମିନାଲର ପ୍ରାଚଳମାନଙ୍କର ପୁନରାବୃତ୍ତି କରିଥାଏ।\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "edit - edit a file in the image\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " This is used to edit a file.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\", editing locally, and then \"write\".\n"
+#~ "\n"
+#~ " Normally it uses $EDITOR, but if you use the aliases\n"
+#~ " \"vi\" or \"emacs\" you will get those editors.\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "ସମ୍ପାଦନ କରନ୍ତୁ - ପ୍ରତିଛବିରେ ଗୋଟିଏ ଫାଇଲକୁ ସମ୍ପାଦନ କରନ୍ତୁ\n"
+#~ " ସମ୍ପାଦନ କରନ୍ତୁ <filename>\n"
+#~ "\n"
+#~ " ଏହା ଗୋଟିଏ ଫାଇଲକୁ ସମ୍ପାଦନ କରିବା ପାଇଁ ବ୍ୟବହୃତ ହୋଇଥାଏ।\n"
+#~ "\n"
+#~ " ଏହା (ଏବଂ ଏହା ଦ୍ୱାରା କାର୍ଯ୍ୟକାରୀ ହୋଇଥାଏ) ସହିତ ସମାନ\n"
+#~ " ଚାଲୁଅଛି \"cat\", ସ୍ଥାନୀୟ ଭାବରେ ସମ୍ପାଦନ କରୁଅଛି, ଏବଂ ତାପରେ \"write-file\".\n"
+#~ "\n"
+#~ " ସାଧାରଣତଃ ଏହା $EDITOR କୁ ବ୍ୟବହାର କରିଥାଏ, କିନ୍ତୁ ଯଦି ଆପଣ ଉପନାମକୁ ବ୍ୟବହାର କରନ୍ତି\n"
+#~ " \"vi\" ଅଥବା \"emacs\" ଆପଣ ସେହି ସମ୍ପାଦକ ମାନଙ୍କୁ ପାଆନ୍ତି।\n"
+#~ "\n"
+#~ " ଟିପ୍ପଣୀ: ଏହା ବୃହତ ଫାଇଲଗୁଡ଼ିକ ପାଇଁ ବିଶ୍ୱସ୍ତ ଭାବରେ କାର୍ଯ୍ୟ କରିନଥାଏ\n"
+#~ " (> 2 MB) ଅଥବା \\0 ବାଇଟ ଧାରଣ କରିଥିବା ଦ୍ୱିମିକ ଫାଇଲ ପାଇଁ।\n"
+
+#~ msgid ""
+#~ "lcd - local change directory\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " Change guestfish's current directory. This command is\n"
+#~ " useful if you want to download files to a particular\n"
+#~ " place.\n"
+#~ msgstr ""
+#~ "lcd - ସ୍ଥାନୀୟ ପରିବର୍ତ୍ତନ ଡିରେକ୍ଟୋରୀ\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " guestfish's ପ୍ରଚଳିତ ଡିରେକ୍ଟୋରୀକୁ ପରିବର୍ତ୍ତନ କରନ୍ତୁ। ଏହି ନିର୍ଦ୍ଦେଶଟି ଉପଯୋଗୀ ଅଟେ\n"
+#~ " ଯଦି ଆପଣ ଫାଇଲଗୁଡ଼ିକୁ ଗୋଟିଏ ନିର୍ଦ୍ଦିଷ୍ଟ ସ୍ଥାନରେ\n"
+#~ " ଆହରଣ କରିବାକୁ ଚାହୁଁଥାନ୍ତି।\n"
+
+#~ msgid ""
+#~ "glob - expand wildcards in command\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob runs <command> with wildcards expanded in any\n"
+#~ " command args. Note that the command is run repeatedly\n"
+#~ " once for each expanded argument.\n"
+#~ msgstr ""
+#~ "glob - ନିର୍ଦ୍ଦେଶରେ ୱାଇଲ୍ଡ କାର୍ଡଗୁଡ଼ିକୁ ବିସ୍ତାର କରାଯାଇଥାଏ\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob <command> ଯେକୌଣସି\n"
+#~ " ନିର୍ଦ୍ଦେଶ args ରେ ବିସ୍ତାର ହୋଇଥିବା ୱାଇଲ୍ଡକାର୍ଡଗୁଡ଼ିକ ସହିତ ଚଲାଇଥାଏ। ମନେରଖନ୍ତୁ ଯେ "
+#~ "ନିର୍ଦ୍ଦେଶଟି ବାରମ୍ବାର ଚାଲିଥାଏ\n"
+#~ " ପ୍ରତ୍ୟେକ ବିସ୍ତୃତ ସ୍ୱତନ୍ତ୍ରଚର ପାଇଁ ଥରେ।\n"
+
+#~ msgid ""
+#~ "more - view a file in the pager\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " This is used to view a file in the pager.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\" and using the pager.\n"
+#~ "\n"
+#~ " Normally it uses $PAGER, but if you use the alias\n"
+#~ " \"less\" then it always uses \"less\".\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "ଅଧିକ - ପେଜରରେ ଗୋଟିଏ ଫାଇଲକୁ ଦେଖନ୍ତୁ\n"
+#~ " ଅଧିକ <filename>\n"
+#~ "\n"
+#~ " ଏହା ଗୋଟିଏ ଫାଇଲକୁ ପେଜରରେ ଦେଖିବା ପାଇଁ ବ୍ୟବହୃତ ହୋଇଥାଏ।\n"
+#~ "\n"
+#~ " ଏହା ସହିତ ସମାନ (ଏବଂ ଏହା ଦ୍ୱାରା କାର୍ଯ୍ୟକାରୀ ହୋଇଥାଏ)\n"
+#~ " \"cat\" ଚାଲୁଅଛି ଏବଂ ପେଜରକୁ ବ୍ୟବହାର କରୁଅଛି।\n"
+#~ "\n"
+#~ " ସାଧାରଣତଃ ଏହା $PAGER ବ୍ୟବହାର କରିଥାଏ, କିନ୍ତୁ ଯଦି ଆପଣ ଉପନାମକୁ ବ୍ୟବହାର କରନ୍ତି\n"
+#~ " ତେବେ \"less\" ସର୍ବଦା \"less\" କୁ ବ୍ୟବହାର କରିଥାଏ।\n"
+#~ "\n"
+#~ " ଟିପ୍ପଣୀ: ଏହା ବୃହତ ଫାଇଲ ପାଇଁ ବିଶ୍ୱସ୍ତ ଭାବରେ କାର୍ଯ୍ୟକରିନଥାଏ\n"
+#~ " (> 2 MB) କିମ୍ବା ଦ୍ୱମିକ ଫାଇଲଗୁଡ଼ିକ \\0 ବାଇଟ ଧାରଣ କରିଥାଏ।\n"
+
+#~ msgid ""
+#~ "reopen - close and reopen the libguestfs handle\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
+#~ "this normally, because the handle is closed properly when guestfish\n"
+#~ "exits. However this is occasionally useful for testing.\n"
+#~ msgstr ""
+#~ "ପୁଣି ଖୋଲନ୍ତୁ - libguestfs ନିୟନ୍ତ୍ରଣକୁ ବନ୍ଦ କରନ୍ତୁ ଏବଂ ପୁଣି ଖୋଲନ୍ତୁ\n"
+#~ " ପୁଣିଖୋଲନ୍ତୁ\n"
+#~ "\n"
+#~ "libguestfs ନିୟନ୍ତ୍ରଣକୁ ବନ୍ଦ କରନ୍ତୁ ଏବଂ ପୁଣି ଖୋଲନ୍ତୁ। ଏହାକୁ ସାଧାରଣତଃ ବ୍ୟବହାର କରିବା "
+#~ "ଆବଶ୍ୟକ ନୁହଁ\n"
+#~ ", କାରଣ ନିୟନ୍ତ୍ରଣଟି ସଠିକ ଭାବରେ ବନ୍ଦ ହୋଇନାହିଁ ଯେତେବେଳେ guestfish\n"
+#~ "ପ୍ରସ୍ଥାନ କରିଥାଏ। ତଥାପି ଏହା ବେଳେବେଳେ ପରୀକ୍ଷା ପାଇଁ ବ୍ୟବହାର ହୋଇଥାଏ।\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "sparse - allocate a sparse image file\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty sparse file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " In all respects it works the same as the 'alloc'\n"
+#~ " command, except that the image file is allocated\n"
+#~ " sparsely, which means that disk blocks are not assigned\n"
+#~ " to the file until they are needed. Sparse disk files\n"
+#~ " only use space when written to, but they are slower\n"
+#~ " and there is a danger you could run out of real disk\n"
+#~ " space during a write operation.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
+#~ msgstr ""
+#~ "sparse - ଗୋଟିଏ ସ୍ପାର୍ଶ ପ୍ରତିଛବି ଫାଇଲ ବଣ୍ଟନ କରିଥାଏ\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " ଏହା ପ୍ରଦତ୍ତ ଆକାରର ଗୋଟିଏ ଖାଲି ସ୍ପାର୍ଷ ଫାଇଲ ନିର୍ମାଣ କରିଥାଏ,\n"
+#~ " ଏବଂ ତାପରେ ଯୋଗ କରିଥାଏ ଯାହାଫଳରେ ଏହା ପରେ ପରୀକ୍ଷା କରିହେବ।\n"
+#~ "\n"
+#~ " ସମସ୍ତ ପ୍ରକାରରେ ଏହା 'alloc' ନିର୍ଦ୍ଦେଶ ପରି ସମାନ ଭାବରେ କାର୍ଯ୍ୟ\n"
+#~ " କରିଥାଏ, କେବଳ ପ୍ରତିଛବି ଫାଇଲ ସ୍ପାର୍ଷରେ ବଣ୍ଟିତ ହୋଇନଥିବା \n"
+#~ " ପରେ, ଯାହା ଅର୍ଥ ହେଉଛି ଡିସ୍କ ବ୍ଲକଗୁଡ଼ିକ ଆବଶ୍ୟକ ନହୋଇଥିବା ପର୍ଯ୍ୟନ୍ତ ନ୍ୟସ୍ତ\n"
+#~ " ହୋଇନାହିଁ। ସ୍ପାର୍ଷ ଡିସ୍କ ଫାଇଲଗୁଡ଼ିକ କେବଳ\n"
+#~ " ଲେଖିବା ସମୟରେ ହିଁ ସ୍ଥାନକୁ ବ୍ୟବହାର କରିଥାଏ, କିନ୍ତୁ ସେମାନେ ମନ୍ଥର\n"
+#~ " ଏବଂ ସେଠାରେ ଗୋଟିଏ ବିପଦ ଅଛି ଯେ ଆପଣଙ୍କ ପାଖରେ ଲେଖିବା ସମୟରେ ପ୍ରକୃତ ଡିସ୍କ ଖାଲିସ୍ଥାନ\n"
+#~ " ସମାପ୍ତ ହୋଇପାରେ।\n"
+#~ "\n"
+#~ " ଅଧିକ ଉନ୍ନତ ପ୍ରତିଛବି ନିର୍ମାଣ ପାଇଁ, qemu-img ଉପଯୋଗିତାକୁ ଦେଖନ୍ତୁ।\n"
+#~ "\n"
+#~ " ଆକାରକୁ ଉଲ୍ଲେଖ କରିହେବ (ଯେଉଁଠି <nn> ମାନେ ହେଉଛି ଗୋଟିଏ ସଂଖ୍ୟା):\n"
+#~ " <nn> କିଲୋବାଇଟ ସଂଖ୍ୟା\n"
+#~ " eg: 1440 ମାନକ 3.5\" ଫ୍ଲପି\n"
+#~ " <nn>K ଅଥବା <nn>KB କିଲୋବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>M ଅଥବା <nn>MB ମେଗାବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>G ଅଥବା <nn>GB ଗିଗାବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>T ଅଥବା <nn>TB ଟେରାବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>P ଅଥବା <nn>PB ପେଟାବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>E ଅଥବା <nn>EB ଏକ୍ସାବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>sects 512 ବାଇଟ ବିଭାଗ ସଂଖ୍ୟା\n"
+
+#~ msgid ""
+#~ "time - measure time taken to run command\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " This runs <command> as usual, and prints the elapsed\n"
+#~ " time afterwards.\n"
+#~ msgstr ""
+#~ "ସମୟ - ନିର୍ଦ୍ଦେଶକୁ ଚଲାଇବା ପାଇଁ ନେଇଥିବା ସମୟକୁ ମାପନ୍ତୁ\n"
+#~ " ସମୟ <command> [<args> ...]\n"
+#~ "\n"
+#~ " ଏହା <command> କୁ ସେହିପରି ଚଲାଇଥାଏ, ଏବଂ ସମାପ୍ତ ହୋଇଥିବା ସମୟକୁ ପରବର୍ତ୍ତି ସମୟରେ\n"
+#~ " ମୁଦ୍ରଣ କରିଥାଏ।\n"
+
+#~ msgid "external command failed: %s"
+#~ msgstr "ବାହ୍ୟ ନିର୍ଦ୍ଦେଶ ବିଫଳ ହୋଇଛି: %s"
+
+#~ msgid "test if file exists"
+#~ msgstr "ଫାଇଲ ଅବସ୍ଥିତ ଥିଲେ ପରୀକ୍ଷା କରନ୍ତୁ"
+
+#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
+#~ msgstr "LIBGUESTFS_PATH ରେ %s କିମ୍ବା %s କୁ ପାଇ ପାରିବେ ନାହିଁ (ପ୍ରଚଳିତ ପଥ = %s)"
+
+#~ msgid "failed to connect to vmchannel socket"
+#~ msgstr "vmchannel ସକେଟ ସହିତ ସଂଯୁକ୍ତ ହେବାରେ ବିଫଳ ହୋଇଛି"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
+#~ "selinux\n"
+#~ msgstr ""
+#~ "%s: -i ବିକଳ୍ପକୁ -a, -m, --listen, --remote କିମ୍ବା --selinux ସହିତ ବ୍ୟବହାର କରିପାରିବେ "
+#~ "ନାହିଁ\n"
+
+#, fuzzy
+#~ msgid "cpio command failed: {error}"
+#~ msgstr "ନିର୍ଦ୍ଦେଶ ବିଫଳ ହୋଇଛି: %s"
+
+#~ msgid ""
+#~ "alloc - allocate an image\n"
+#~ " alloc <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty (zeroed) file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified (where <nn> means a number):\n"
+#~ " <nn> number of kilobytes\n"
+#~ " eg: 1440 standard 3.5\" floppy\n"
+#~ " <nn>K or <nn>KB number of kilobytes\n"
+#~ " <nn>M or <nn>MB number of megabytes\n"
+#~ " <nn>G or <nn>GB number of gigabytes\n"
+#~ " <nn>T or <nn>TB number of terabytes\n"
+#~ " <nn>P or <nn>PB number of petabytes\n"
+#~ " <nn>E or <nn>EB number of exabytes\n"
+#~ " <nn>sects number of 512 byte sectors\n"
+#~ msgstr ""
+#~ "alloc - ଗୋଟିଏ ପ୍ରତିଛବି ବଣ୍ଟନ କରନ୍ତୁ\n"
+#~ " alloc <filename> <size>\n"
+#~ "\n"
+#~ " ଏହା ପ୍ରଦତ୍ତ ଆକାରର ଗୋଟିଏ ଖାଲି (zeroed) ଫାଇଲ ନିର୍ମାଣ କରିଥାଏ,\n"
+#~ " ଏବଂ ତାପରେ ଯୋଗ କରିଥାଏ ତେଣୁ ତାହାକୁ ପରେ ପରୀକ୍ଷା କରିପାରିବେ।\n"
+#~ "\n"
+#~ " ଅଧିକ ଉନ୍ନତ ପ୍ରତିଛବି ନିର୍ମାଣ ପାଇଁ, qemu-img ଉପଯୋଗୀତାକୁ ଦେଖନ୍ତୁ।\n"
+#~ "\n"
+#~ " ଆକାରକୁ ଉଲ୍ଲେଖ କରାଯାଇପାରିବ (ଯେଉଁଠି <nn> ମାନେ ହେଉଛି ଗୋଟିଏ ସଂଖ୍ୟା):\n"
+#~ " <nn> କିଲୋବାଇଟ ସଂଖ୍ୟା\n"
+#~ " eg: 1440 ମାନକ 3.5\" ଫ୍ଲପି\n"
+#~ " <nn>K କିମ୍ବା <nn>KB କିଲୋବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>M କିମ୍ବା <nn>MB ମେଗାବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>G କିମ୍ବା <nn>GB ଗିଗାବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>T କିମ୍ବା <nn>TB ଟେରାବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>P କିମ୍ବା <nn>PB ପେଟାବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>E କିମ୍ବା <nn>EB ଏକ୍ସାବାଇଟ ସଂଖ୍ୟା\n"
+#~ " <nn>sects 512 ବାଇଟ ବିଭାଗଗୁଡ଼ିକର ସଂଖ୍ୟା\n"
+
+#~ msgid "%s: virt-inspector command too long for fixed-size buffer\n"
+#~ msgstr "%s: virt-inspector ନିର୍ଦ୍ଦେଶଟି ସ୍ଥାୟୀ-ଆକାରର ବଫର ପାଇଁ ଅତ୍ୟଧିକ ଲମ୍ବା ଅଟେ\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Welcome to hivexsh, the hivex interactive shell for examining\n"
+#~ "Windows Registry binary hive files.\n"
+#~ "\n"
+#~ "Type: 'help' for help summary\n"
+#~ " 'quit' to quit the shell\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "guestfish ରେ ଆପଣଙ୍କୁ ସ୍ୱାଗତ କରୁଅଛୁ, libguestfs ଫାଇଲତନ୍ତ୍ର ପାରସ୍ପରିକ shell\n"
+#~ "ଆଭାସୀ ଯନ୍ତ୍ର ଫାଇଲତନ୍ତ୍ରଗୁଡ଼ିକରେ ସମ୍ପାଦନ କରୁଅଛି।\n"
+#~ "\n"
+#~ "ଟାଇପ କରନ୍ତୁ: 'help' ନିର୍ଦ୍ଦେଶ ସହିତ ସହାୟତା ପାଇଁ\n"
+#~ " 'quit' shellରୁ ପ୍ରସ୍ଥାନ କରିବା ପାଇଁ\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "%s: %s: key not found\n"
+#~ msgstr "%s: %s: ଗଣନସଂଖ୍ୟାଟି ପରିସର ବାହାରେ\n"
git.annexia.org / libguestfs.git / blobdiff