-#, fuzzy
-#~ msgid ""
-#~ "sparse - allocate a sparse image file\n"
-#~ " sparse <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty sparse file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " In all respects it works the same as the 'alloc'\n"
-#~ " command, except that the image file is allocated\n"
-#~ " sparsely, which means that disk blocks are not assigned\n"
-#~ " to the file until they are needed. Sparse disk files\n"
-#~ " only use space when written to, but they are slower\n"
-#~ " and there is a danger you could run out of real disk\n"
-#~ " space during a write operation.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
-#~ msgstr ""
-#~ "sparse - प्रतिमाचे वाटप करते\n"
-#~ " sparse <filename> <size>\n"
-#~ "\n"
-#~ " यामुळे ठराविक आकाराचे रिकामे sparse फाइल निर्माण होते,\n"
-#~ " व पुढील विश्लेषणकरीता समावेश केले जाते.\n"
-#~ "\n"
-#~ " बऱ्यापैकी 'alloc'\n"
-#~ " आदेश प्रमाणेच कार्य करते, एवढेच की प्रतिमा फाइल\n"
-#~ " sparse पणे वाटप होते, म्हणजेच आवश्यकता असल्यावरच डिस्क ब्लॉक\n"
-#~ " फाइलकरीता लागू केले जातात. Sparse डिस्क फाइल्स्\n"
-#~ " फक्ल लिहतेवेळीच डिस्कवरील जागेचा वापर करते, परंतु हे कार्य हळु व लिहतेवेळी\n"
-#~ " अतिरीक्त जागा डिस्कवर न आढळल्यास\n"
-#~ " गंभीर धोका निर्माण होऊ शकतो.\n"
-#~ "\n"
-#~ " आकार निर्देशीत करणे शक्य आहे (जेथे <nn> म्हणजे क्रमांक):\n"
-#~ " <nn> किलोबाईट्सची संख्या\n"
-#~ " उदा: 1440 मानक 3.5\" फ्लॉपी\n"
-#~ " <nn>K किंवा <nn>KB किलोबाईट्समधील प्रमाण\n"
-#~ " <nn>M किंवा <nn>MB मेगाबाईट्समधील प्रमाण\n"
-#~ " <nn>G किंवा <nn>GB गीगाबाईट्समधील प्रमाण\n"
-#~ " <nn>T किंवा <nn>TB टेराबाईट्समधील प्रमाण\n"
-#~ " <nn>P किंवा <nn>PB पेटाबाईट्समधील प्रमाण\n"
-#~ " <nn>E किंवा <nn>EB एक्जाबाईट्समधील प्रमाण\n"
-#~ " <nn>sects 512 बाईट सेक्टरचे प्रमाण\n"
-
-#~ msgid ""
-#~ "time - measure time taken to run command\n"
-#~ " time <command> [<args> ...]\n"
-#~ "\n"
-#~ " This runs <command> as usual, and prints the elapsed\n"
-#~ " time afterwards.\n"
-#~ msgstr ""
-#~ "time - आदेश चालवण्यासाठी व्याप्त वेळ मोजतो\n"
-#~ " time <command> [<args> ...]\n"
-#~ "\n"
-#~ " यामुळे <command> साधारणपणे चालवले जाते, व व्याप्त वेळची\n"
-#~ " नंतर छपाई केली जाते.\n"
-
-#~ msgid "external command failed: %s"
-#~ msgstr "बाहेरील आदेश अपयशी: %s"
-
-#~ msgid "test if file exists"
-#~ msgstr "फाइल अस्तित्वात आहे याची चाचणी करा"
-
-#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
-#~ msgstr "%s किंवा %s LIBGUESTFS_PATH (current path = %s) येथे आढळले नाही"
-
-#~ msgid "failed to connect to vmchannel socket"
-#~ msgstr "vmchannel सॉकेटसह जुळवणी करणे अशक्य"
-
-#, fuzzy
-#~ msgid ""
-#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
-#~ "selinux\n"
-#~ msgstr ""
-#~ "%s: -i पर्यायचा वापर -a, -m, --listen, --remote किंवा --selinux सह शक्य "
-#~ "नाही\n"
-
-#, fuzzy
-#~ msgid "cpio command failed: {error}"
-#~ msgstr "आदेश अपयशी: %s"
-
-#~ msgid ""
-#~ "alloc - allocate an image\n"
-#~ " alloc <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty (zeroed) file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified (where <nn> means a number):\n"
-#~ " <nn> number of kilobytes\n"
-#~ " eg: 1440 standard 3.5\" floppy\n"
-#~ " <nn>K or <nn>KB number of kilobytes\n"
-#~ " <nn>M or <nn>MB number of megabytes\n"
-#~ " <nn>G or <nn>GB number of gigabytes\n"
-#~ " <nn>T or <nn>TB number of terabytes\n"
-#~ " <nn>P or <nn>PB number of petabytes\n"
-#~ " <nn>E or <nn>EB number of exabytes\n"
-#~ " <nn>sects number of 512 byte sectors\n"
-#~ msgstr ""
-#~ "alloc - प्रतिमाचे वाटप करते\n"
-#~ " alloc <filename> <size>\n"
-#~ "\n"
-#~ " यामुळे ठराविक आकाराचे रिकामे (zeroed) फाइल निर्माण होते,\n"
-#~ " व पुढील विश्लेषणकरीता समावेश केले जाते.\n"
-#~ "\n"
-#~ " प्रगत प्रतिमा निर्माणकरीता, qemu-img युटिलीटी पहा.\n"
-#~ "\n"
-#~ " आकार निर्देशीत करणे शक्य आहे (जेथे <nn> म्हणजे क्रमांक):\n"
-#~ " <nn> किलोबाईट्सची संख्या\n"
-#~ " उदा: 1440 मानक 3.5\" फ्लॉपी\n"
-#~ " <nn>K किंवा <nn>KB किलोबाईट्समधील प्रमाण\n"
-#~ " <nn>M किंवा <nn>MB मेगाबाईट्समधील प्रमाण\n"
-#~ " <nn>G किंवा <nn>GB गीगाबाईट्समधील प्रमाण\n"
-#~ " <nn>T किंवा <nn>TB टेराबाईट्समधील प्रमाण\n"
-#~ " <nn>P किंवा <nn>PB पेटाबाईट्समधील प्रमाण\n"
-#~ " <nn>E किंवा <nn>EB एक्जाबाईट्समधील प्रमाण\n"
-#~ " <nn>sects 512 बाईट सेक्टरचे प्रमाण\n"
-
-#~ msgid "%s: virt-inspector command too long for fixed-size buffer\n"
-#~ msgstr "%s: virt-inspector आदेश ठराविक-आकाराचे बफर करीता खूप लांब आहे\n"
-
-#~ msgid "%s: failed to write XML document\n"
-#~ msgstr "%s: XML दस्तऐवज लिहण्यास अपयशी\n"
-
-#~ msgid "hivexml: missing name of input file\n"
-#~ msgstr "hivexml: इंपुट फाइलचे नाव आढळले नाही\n"
-
-#~ msgid ""
-#~ "\n"
-#~ "Welcome to hivexsh, the hivex interactive shell for examining\n"
-#~ "Windows Registry binary hive files.\n"
-#~ "\n"
-#~ "Type: 'help' for help summary\n"
-#~ " 'quit' to quit the shell\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\n"
-#~ "hivexsh येथे आपले स्वागत, hivex हे \n"
-#~ "Windows Registry बाइनरी hive फाइल्सचे विश्लेषण करण्यासाठी परस्पर संवाद शेल आहे.\n"
-#~ "\n"
-#~ "टाइप: मदत सारांशकरीता 'help' टाइप करा \n"
-#~ " शेल पासून बाहेर पडण्यासाठी 'quit'\n"
-#~ "\n"
-
-#~ msgid "hivexsh: error getting parent of node %zu\n"
-#~ msgstr "hivexsh: नोड %zu चे पॅरेंट प्राप्त करतेवेळी त्रुटी आढळली\n"
-
-#~ msgid "hivexsh: error getting node name of node %zx\n"
-#~ msgstr "hivexsh: नोड %zx चे नोड नाव प्राप्त करतेवेळी त्रुटी आढळली\n"
-
-#~ msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-#~ msgstr ""
-#~ "hivexsh: 'load hivefile' चा वापर करून तुम्ही hive फाइल प्रथम लोड करायला हवे\n"
-
-#~ msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-#~ msgstr "hivexsh: अपरिचीत आदेश '%s', मदत सारांशकरीता 'help' चा वापर करा\n"
-
-#~ msgid "hivexsh: load: no hive file name given to load\n"
-#~ msgstr "hivexsh: load: लोडकरीता hive फाइल नाव दिले नाही\n"
-
-#~ msgid ""
-#~ "hivexsh: failed to open hive file: %s: %m\n"
-#~ "\n"
-#~ "If you think this file is a valid Windows binary hive file (_not_\n"
-#~ "a regedit *.reg file) then please run this command again using the\n"
-#~ "hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-#~ "which fails into a bug report at https://bugzilla.redhat.com/\n"
-#~ "\n"
-#~ msgstr ""
-#~ "hivexsh: hive फाइल उघडण्यास अपयशी: %s: %m\n"
-#~ "\n"
-#~ "ही फाइल वैध Windows बाइनरी hive पाइल (_not_\n"
-#~ "a regedit *.reg file) असल्यास कृपया \n"
-#~ "hivexsh पर्याय '-d' चा वापर करून हे आदेश पुनः चालवा व संपूर्ण आऊटपुट _and_ अपयशी "
-#~ "hive फाइल\n"
-#~ " https://bugzilla.redhat.com/ येथील बग अहवालात जोडा\n"
-#~ "\n"
-
-#~ msgid "hivexsh: '%s' command should not be given arguments\n"
-#~ msgstr "hivexsh: '%s' आदेश यांस घटके देऊ नका\n"
-
-#~ msgid ""
-#~ "%s: %s: \\ characters in path are doubled - are you escaping the path "
-#~ "parameter correctly?\n"
-#~ msgstr ""
-#~ "%s: %s: \\ मार्गातील अक्षरे दुप्पट केले आहेत - तुम्ही मार्ग संबंधीत घटक योग्यप्रकारे एस्केप "
-#~ "करत आहात?\n"
-
-#~ msgid "hivexsh: cd: subkey '%s' not found\n"
-#~ msgstr "hivexsh: cd: सबकि '%s' आढळली नाही\n"
-
-#~ msgid ""
-#~ "Navigate through the hive's keys using the 'cd' command, as if it\n"
-#~ "contained a filesystem, and use 'ls' to list the subkeys of the\n"
-#~ "current key. Full documentation is in the hivexsh(1) manual page.\n"
-#~ msgstr ""
-#~ "'cd' आदेशचा वापर करून हाइव्हच्या किज अंतर्गत, फाइलप्रणाली प्रमाणेच, संचारन करा, \n"
-#~ "व सध्याच्या कि मधील सबकिजच्या सूची करीता 'ls'\n"
-#~ "याचा वापर करा. संपूर्ण दस्तऐवजीकरण hivexsh(1) मॅन्यूअल पृष्ठात आहे.\n"
-
-#~ msgid "%s: %s: key not found\n"
-#~ msgstr "%s: %s: कि आढळली नाही\n"