Generated code for 'scrub-*' commands.

[libguestfs.git] / perl / lib / Sys / Guestfs.pm

diff --git a/perl/lib/Sys/Guestfs.pm b/perl/lib/Sys/Guestfs.pm
index 0e4dde4..9c5aa18 100644 (file)
--- a/perl/lib/Sys/Guestfs.pm
+++ b/perl/lib/Sys/Guestfs.pm
@@ -97,6 +97,11 @@ This function adds a virtual CD-ROM disk image to the guest.
 
 This is equivalent to the qemu parameter C<-cdrom filename>.
 
 
 This is equivalent to the qemu parameter C<-cdrom filename>.
 

+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.
+

 =item $h->add_drive ($filename);
 
 This function adds a virtual machine disk image C<filename> to the
 =item $h->add_drive ($filename);
 
 This function adds a virtual machine disk image C<filename> to the


@@ -110,7 +115,31 @@ for whatever operations you want to perform (ie. read access if you
 just want to read the image or write access if you want to modify the
 image).
 
 just want to read the image or write access if you want to modify the
 image).
 

-This is equivalent to the qemu parameter C<-drive file=filename>.
+This is equivalent to the qemu parameter C<-drive file=filename,cache=off>.
+
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.
+
+=item $h->add_drive_ro ($filename);
+
+This adds a drive in snapshot mode, making it effectively
+read-only.
+
+Note that writes to the device are allowed, and will be seen for
+the duration of the guestfs handle, but they are written
+to a temporary file which is discarded as soon as the guestfs
+handle is closed.  We don't currently have any method to enable
+changes to be committed, although qemu can support this.
+
+This is equivalent to the qemu parameter
+C<-drive file=filename,snapshot=on>.
+
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.

 
 =item $h->aug_close ();
 
 
 =item $h->aug_close ();
 


@@ -403,7 +432,9 @@ or compatible processor architecture).
 The single parameter is an argv-style list of arguments.
 The first element is the name of the program to run.
 Subsequent elements are parameters.  The list must be
 The single parameter is an argv-style list of arguments.
 The first element is the name of the program to run.
 Subsequent elements are parameters.  The list must be

-non-empty (ie. must contain a program name).
+non-empty (ie. must contain a program name).  Note that
+the command runs directly, and is I<not> invoked via
+the shell (see C<$h-E<gt>sh>).

 
 The return value is anything printed to I<stdout> by
 the command.
 
 The return value is anything printed to I<stdout> by
 the command.


@@ -432,6 +463,8 @@ FTP.
 This is the same as C<$h-E<gt>command>, but splits the
 result into a list of lines.
 
 This is the same as C<$h-E<gt>command>, but splits the
 result into a list of lines.
 

+See also: C<$h-E<gt>sh_lines>
+

 Because of the message protocol, there is a transfer limit 
 of somewhere between 2MB and 4MB.  To transfer large files you should use
 FTP.
 Because of the message protocol, there is a transfer limit 
 of somewhere between 2MB and 4MB.  To transfer large files you should use
 FTP.


@@ -499,6 +532,15 @@ Setting C<whattodrop> to 3 should drop everything.
 This automatically calls L<sync(2)> before the operation,
 so that the maximum guest memory is freed.
 
 This automatically calls L<sync(2)> before the operation,
 so that the maximum guest memory is freed.
 

+=item $h->e2fsck_f ($device);
+
+This runs C<e2fsck -p -f device>, ie. runs the ext2/ext3
+filesystem checker on C<device>, noninteractively (C<-p>),
+even if the filesystem appears to be clean (C<-f>).
+
+This command is only needed because of C<$h-E<gt>resize2fs>
+(q.v.).  Normally you should use C<$h-E<gt>fsck>.
+

 =item $h->end_busy ();
 
 This sets the state to C<READY>, or if in C<CONFIG> then it leaves the
 =item $h->end_busy ();
 
 This sets the state to C<READY>, or if in C<CONFIG> then it leaves the


@@ -531,6 +573,33 @@ The exact command which runs is C<file -bsL path>.  Note in
 particular that the filename is not prepended to the output
 (the C<-b> option).
 
 particular that the filename is not prepended to the output
 (the C<-b> option).
 

+=item @names = $h->find ($directory);
+
+This command lists out all files and directories, recursively,
+starting at C<directory>.  It is essentially equivalent to
+running the shell command C<find directory -print> but some
+post-processing happens on the output, described below.
+
+This returns a list of strings I<without any prefix>.  Thus
+if the directory structure was:
+
+ /tmp/a
+ /tmp/b
+ /tmp/c/d
+
+then the returned list from C<$h-E<gt>find> C</tmp> would be
+4 elements:
+
+ a
+ b
+ c
+ c/d
+
+If C<directory> is not a directory, then this command returns
+an error.
+
+The returned list is sorted.
+

 =item $status = $h->fsck ($fstype, $device);
 
 This runs the filesystem checker (fsck) on C<device> which
 =item $status = $h->fsck ($fstype, $device);
 
 This runs the filesystem checker (fsck) on C<device> which


@@ -607,6 +676,19 @@ For more information on states, see L<guestfs(3)>.
 
 This returns the verbose messages flag.
 
 
 This returns the verbose messages flag.
 

+=item @paths = $h->glob_expand ($pattern);
+
+This command searches for all the pathnames matching
+C<pattern> according to the wildcard expansion rules
+used by the shell.
+
+If no paths match, then this returns an empty list
+(note: not an error).
+
+It is just a wrapper around the C L<glob(3)> function
+with flags C<GLOB_MARK|GLOB_BRACE>.
+See that manual page for more details.
+

 =item $h->grub_install ($root, $device);
 
 This command installs GRUB (the Grand Unified Bootloader) on
 =item $h->grub_install ($root, $device);
 
 This command installs GRUB (the Grand Unified Bootloader) on


@@ -740,6 +822,12 @@ the path to the LV, such as C</dev/VG/LV>.
 You can also remove all LVs in a volume group by specifying
 the VG name, C</dev/VG>.
 
 You can also remove all LVs in a volume group by specifying
 the VG name, C</dev/VG>.
 

+=item $h->lvresize ($device, $mbytes);
+
+This resizes (expands or shrinks) an existing LVM logical
+volume to C<mbytes>.  When reducing, data in the reduced part
+is lost.
+

 =item @logvols = $h->lvs ();
 
 List all the logical volumes detected.  This is the equivalent
 =item @logvols = $h->lvs ();
 
 List all the logical volumes detected.  This is the equivalent


@@ -818,6 +906,20 @@ Some internal mounts are not shown.
 This moves a file from C<src> to C<dest> where C<dest> is
 either a destination filename or destination directory.
 
 This moves a file from C<src> to C<dest> where C<dest> is
 either a destination filename or destination directory.
 

+=item $status = $h->ntfs_3g_probe ($rw, $device);
+
+This command runs the L<ntfs-3g.probe(8)> command which probes
+an NTFS C<device> for mountability.  (Not all NTFS volumes can
+be mounted read-write, and some cannot be mounted at all).
+
+C<rw> is a boolean flag.  Set it to true if you want to test
+if the volume can be mounted read-write.  Set it to false if
+you want to test if the volume can be mounted read-only.
+
+The return value is an integer which C<0> if the operation
+would succeed, or some non-zero value documented in the
+L<ntfs-3g.probe(8)> manual page.
+

 =item $h->ping_daemon ();
 
 This is a test probe into the guestfs daemon running inside
 =item $h->ping_daemon ();
 
 This is a test probe into the guestfs daemon running inside


@@ -872,6 +974,17 @@ Note that this function cannot correctly handle binary files
 as end of line).  For those you need to use the C<$h-E<gt>read_file>
 function which has a more complex interface.
 
 as end of line).  For those you need to use the C<$h-E<gt>read_file>
 function which has a more complex interface.
 

+=item $h->resize2fs ($device);
+
+This resizes an ext2 or ext3 filesystem to match the size of
+the underlying device.
+
+I<Note:> It is sometimes required that you run C<$h-E<gt>e2fsck_f>
+on the C<device> before calling this command.  For unknown reasons
+C<resize2fs> sometimes gives an error about this and sometimes not.
+In any case, it is always safe to call C<$h-E<gt>e2fsck_f> before
+calling this function.
+

 =item $h->rm ($path);
 
 Remove the single file C<path>.
 =item $h->rm ($path);
 
 Remove the single file C<path>.


@@ -886,6 +999,38 @@ command.
 
 Remove the single directory C<path>.
 
 
 Remove the single directory C<path>.
 

+=item $h->scrub_device ($device);
+
+This command writes patterns over C<device> to make data retrieval
+more difficult.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=item $h->scrub_file ($file);
+
+This command writes patterns over a file to make data retrieval
+more difficult.
+
+The file is I<removed> after scrubbing.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+=item $h->scrub_freespace ($dir);
+
+This command creates the directory C<dir> and then fills it
+with files until the filesystem is full, and scrubs the files
+as for C<$h-E<gt>scrub_file>, and deletes them.
+The intention is to scrub any free space on the partition
+containing C<dir>.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+

 =item $h->set_append ($append);
 
 This function is used to add additional options to the
 =item $h->set_append ($append);
 
 This function is used to add additional options to the


@@ -1029,6 +1174,32 @@ This displays the partition table on C<device>, in the
 human-readable output of the L<sfdisk(8)> command.  It is
 not intended to be parsed.
 
 human-readable output of the L<sfdisk(8)> command.  It is
 not intended to be parsed.
 

+=item $output = $h->sh ($command);
+
+This call runs a command from the guest filesystem via the
+guest's C</bin/sh>.
+
+This is like C<$h-E<gt>command>, but passes the command to:
+
+ /bin/sh -c "command"
+
+Depending on the guest's shell, this usually results in
+wildcards being expanded, shell expressions being interpolated
+and so on.
+
+All the provisos about C<$h-E<gt>command> apply to this call.
+
+=item @lines = $h->sh_lines ($command);
+
+This is the same as C<$h-E<gt>sh>, but splits the result
+into a list of lines.
+
+See also: C<$h-E<gt>command_lines>
+
+=item $h->sleep ($secs);
+
+Sleep for C<secs> seconds.
+

 =item %statbuf = $h->stat ($path);
 
 Returns file information for the given C<path>.
 =item %statbuf = $h->stat ($path);
 
 Returns file information for the given C<path>.


@@ -1226,6 +1397,8 @@ How many blocks are zeroed isn't specified (but it's I<not> enough
 to securely wipe the device).  It should be sufficient to remove
 any partition tables, filesystem superblocks and so on.
 
 to securely wipe the device).  It should be sufficient to remove
 any partition tables, filesystem superblocks and so on.
 

+See also: C<$h-E<gt>scrub_device>.
+

 =item $h->zerofree ($device);
 
 This runs the I<zerofree> program on C<device>.  This program
 =item $h->zerofree ($device);
 
 This runs the I<zerofree> program on C<device>.  This program