Clean up XML output

[libguestfs.git] / perl / lib / Sys / Guestfs.pm

diff --git a/perl/lib/Sys/Guestfs.pm b/perl/lib/Sys/Guestfs.pm
index cba0032..83fbbb1 100644 (file)
--- a/perl/lib/Sys/Guestfs.pm
+++ b/perl/lib/Sys/Guestfs.pm
@@ -97,6 +97,11 @@ This function adds a virtual CD-ROM disk image to the guest.
 
 This is equivalent to the qemu parameter C<-cdrom filename>.
 
 
 This is equivalent to the qemu parameter C<-cdrom filename>.
 

+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.
+

 =item $h->add_drive ($filename);
 
 This function adds a virtual machine disk image C<filename> to the
 =item $h->add_drive ($filename);
 
 This function adds a virtual machine disk image C<filename> to the


@@ -110,7 +115,31 @@ for whatever operations you want to perform (ie. read access if you
 just want to read the image or write access if you want to modify the
 image).
 
 just want to read the image or write access if you want to modify the
 image).
 

-This is equivalent to the qemu parameter C<-drive file=filename>.
+This is equivalent to the qemu parameter C<-drive file=filename,cache=off>.
+
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.
+
+=item $h->add_drive_ro ($filename);
+
+This adds a drive in snapshot mode, making it effectively
+read-only.
+
+Note that writes to the device are allowed, and will be seen for
+the duration of the guestfs handle, but they are written
+to a temporary file which is discarded as soon as the guestfs
+handle is closed.  We don't currently have any method to enable
+changes to be committed, although qemu can support this.
+
+This is equivalent to the qemu parameter
+C<-drive file=filename,snapshot=on>.
+
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.

 
 =item $h->aug_close ();
 
 
 =item $h->aug_close ();
 


@@ -403,7 +432,9 @@ or compatible processor architecture).
 The single parameter is an argv-style list of arguments.
 The first element is the name of the program to run.
 Subsequent elements are parameters.  The list must be
 The single parameter is an argv-style list of arguments.
 The first element is the name of the program to run.
 Subsequent elements are parameters.  The list must be

-non-empty (ie. must contain a program name).
+non-empty (ie. must contain a program name).  Note that
+the command runs directly, and is I<not> invoked via
+the shell (see C<$h-E<gt>sh>).

 
 The return value is anything printed to I<stdout> by
 the command.
 
 The return value is anything printed to I<stdout> by
 the command.


@@ -432,6 +463,8 @@ FTP.
 This is the same as C<$h-E<gt>command>, but splits the
 result into a list of lines.
 
 This is the same as C<$h-E<gt>command>, but splits the
 result into a list of lines.
 

+See also: C<$h-E<gt>sh_lines>
+

 Because of the message protocol, there is a transfer limit 
 of somewhere between 2MB and 4MB.  To transfer large files you should use
 FTP.
 Because of the message protocol, there is a transfer limit 
 of somewhere between 2MB and 4MB.  To transfer large files you should use
 FTP.


@@ -643,6 +676,19 @@ For more information on states, see L<guestfs(3)>.
 
 This returns the verbose messages flag.
 
 
 This returns the verbose messages flag.
 

+=item @paths = $h->glob_expand ($pattern);
+
+This command searches for all the pathnames matching
+C<pattern> according to the wildcard expansion rules
+used by the shell.
+
+If no paths match, then this returns an empty list
+(note: not an error).
+
+It is just a wrapper around the C L<glob(3)> function
+with flags C<GLOB_MARK|GLOB_BRACE>.
+See that manual page for more details.
+

 =item $h->grub_install ($root, $device);
 
 This command installs GRUB (the Grand Unified Bootloader) on
 =item $h->grub_install ($root, $device);
 
 This command installs GRUB (the Grand Unified Bootloader) on


@@ -806,6 +852,27 @@ Create a directory named C<path>.
 Create a directory named C<path>, creating any parent directories
 as necessary.  This is like the C<mkdir -p> shell command.
 
 Create a directory named C<path>, creating any parent directories
 as necessary.  This is like the C<mkdir -p> shell command.
 

+=item $dir = $h->mkdtemp ($template);
+
+This command creates a temporary directory.  The
+C<template> parameter should be a full pathname for the
+temporary directory name with the final six characters being
+"XXXXXX".
+
+For example: "/tmp/myprogXXXXXX" or "/Temp/myprogXXXXXX",
+the second one being suitable for Windows filesystems.
+
+The name of the temporary directory that was created
+is returned.
+
+The temporary directory is created with mode 0700
+and is owned by root.
+
+The caller is responsible for deleting the temporary
+directory and its contents after use.
+
+See also: L<mkdtemp(3)>
+

 =item $h->mkfs ($fstype, $device);
 
 This creates a filesystem on C<device> (usually a partition
 =item $h->mkfs ($fstype, $device);
 
 This creates a filesystem on C<device> (usually a partition


@@ -860,6 +927,20 @@ Some internal mounts are not shown.
 This moves a file from C<src> to C<dest> where C<dest> is
 either a destination filename or destination directory.
 
 This moves a file from C<src> to C<dest> where C<dest> is
 either a destination filename or destination directory.
 

+=item $status = $h->ntfs_3g_probe ($rw, $device);
+
+This command runs the L<ntfs-3g.probe(8)> command which probes
+an NTFS C<device> for mountability.  (Not all NTFS volumes can
+be mounted read-write, and some cannot be mounted at all).
+
+C<rw> is a boolean flag.  Set it to true if you want to test
+if the volume can be mounted read-write.  Set it to false if
+you want to test if the volume can be mounted read-only.
+
+The return value is an integer which C<0> if the operation
+would succeed, or some non-zero value documented in the
+L<ntfs-3g.probe(8)> manual page.
+

 =item $h->ping_daemon ();
 
 This is a test probe into the guestfs daemon running inside
 =item $h->ping_daemon ();
 
 This is a test probe into the guestfs daemon running inside


@@ -939,6 +1020,38 @@ command.
 
 Remove the single directory C<path>.
 
 
 Remove the single directory C<path>.
 

+=item $h->scrub_device ($device);
+
+This command writes patterns over C<device> to make data retrieval
+more difficult.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=item $h->scrub_file ($file);
+
+This command writes patterns over a file to make data retrieval
+more difficult.
+
+The file is I<removed> after scrubbing.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+=item $h->scrub_freespace ($dir);
+
+This command creates the directory C<dir> and then fills it
+with files until the filesystem is full, and scrubs the files
+as for C<$h-E<gt>scrub_file>, and deletes them.
+The intention is to scrub any free space on the partition
+containing C<dir>.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+

 =item $h->set_append ($append);
 
 This function is used to add additional options to the
 =item $h->set_append ($append);
 
 This function is used to add additional options to the


@@ -1082,6 +1195,32 @@ This displays the partition table on C<device>, in the
 human-readable output of the L<sfdisk(8)> command.  It is
 not intended to be parsed.
 
 human-readable output of the L<sfdisk(8)> command.  It is
 not intended to be parsed.
 

+=item $output = $h->sh ($command);
+
+This call runs a command from the guest filesystem via the
+guest's C</bin/sh>.
+
+This is like C<$h-E<gt>command>, but passes the command to:
+
+ /bin/sh -c "command"
+
+Depending on the guest's shell, this usually results in
+wildcards being expanded, shell expressions being interpolated
+and so on.
+
+All the provisos about C<$h-E<gt>command> apply to this call.
+
+=item @lines = $h->sh_lines ($command);
+
+This is the same as C<$h-E<gt>sh>, but splits the result
+into a list of lines.
+
+See also: C<$h-E<gt>command_lines>
+
+=item $h->sleep ($secs);
+
+Sleep for C<secs> seconds.
+

 =item %statbuf = $h->stat ($path);
 
 Returns file information for the given C<path>.
 =item %statbuf = $h->stat ($path);
 
 Returns file information for the given C<path>.


@@ -1279,6 +1418,8 @@ How many blocks are zeroed isn't specified (but it's I<not> enough
 to securely wipe the device).  It should be sufficient to remove
 any partition tables, filesystem superblocks and so on.
 
 to securely wipe the device).  It should be sufficient to remove
 any partition tables, filesystem superblocks and so on.
 

+See also: C<$h-E<gt>scrub_device>.
+

 =item $h->zerofree ($device);
 
 This runs the I<zerofree> program on C<device>.  This program
 =item $h->zerofree ($device);
 
 This runs the I<zerofree> program on C<device>.  This program