+=head1 BLOCK DEVICE NAMING
+
+In the kernel there is now quite a profusion of schemata for naming
+block devices (in this context, by I<block device> I mean a physical
+or virtual hard drive). The original Linux IDE driver used names
+starting with C</dev/hd*>. SCSI devices have historically used a
+different naming scheme, C</dev/sd*>. When the Linux kernel I<libata>
+driver became a popular replacement for the old IDE driver
+(particularly for SATA devices) those devices also used the
+C</dev/sd*> scheme. Additionally we now have virtual machines with
+paravirtualized drivers. This has created several different naming
+systems, such as C</dev/vd*> for virtio disks and C</dev/xvd*> for Xen
+PV disks.
+
+As discussed above, libguestfs uses a qemu appliance running an
+embedded Linux kernel to access block devices. We can run a variety
+of appliances based on a variety of Linux kernels.
+
+This causes a problem for libguestfs because many API calls use device
+or partition names. Working scripts and the recipe (example) scripts
+that we make available over the internet could fail if the naming
+scheme changes.
+
+Therefore libguestfs defines C</dev/sd*> as the I<standard naming
+scheme>. Internally C</dev/sd*> names are translated, if necessary,
+to other names as required. For example, under RHEL 5 which uses the
+C</dev/hd*> scheme, any device parameter C</dev/sda2> is translated to
+C</dev/hda2> transparently.
+
+Note that this I<only> applies to parameters. The
+C<guestfs_list_devices>, C<guestfs_list_partitions> and similar calls
+return the true names of the devices and partitions as known to the
+appliance.
+
+=head2 ALGORITHM FOR BLOCK DEVICE NAME TRANSLATION
+
+Usually this translation is transparent. However in some (very rare)
+cases you may need to know the exact algorithm. Such cases include
+where you use C<guestfs_config> to add a mixture of virtio and IDE
+devices to the qemu-based appliance, so have a mixture of C</dev/sd*>
+and C</dev/vd*> devices.
+
+The algorithm is applied only to I<parameters> which are known to be
+either device or partition names. Return values from functions such
+as C<guestfs_list_devices> are never changed.
+
+=over 4
+
+=item *
+
+Is the string a parameter which is a device or partition name?
+
+=item *
+
+Does the string begin with C</dev/sd>?
+
+=item *
+
+Does the named device exist? If so, we use that device.
+However if I<not> then we continue with this algorithm.
+
+=item *
+
+Replace initial C</dev/sd> string with C</dev/hd>.
+
+For example, change C</dev/sda2> to C</dev/hda2>.
+
+If that named device exists, use it. If not, continue.
+
+=item *
+
+Replace initial C</dev/sd> string with C</dev/vd>.
+
+If that named device exists, use it. If not, return an error.
+
+=back
+
+=head2 PORTABILITY CONCERNS
+
+Although the standard naming scheme and automatic translation is
+useful for simple programs and guestfish scripts, for larger programs
+it is best not to rely on this mechanism.
+
+Where possible for maximum future portability programs using
+libguestfs should use these future-proof techniques:
+
+=over 4
+
+=item *
+
+Use C<guestfs_list_devices> or C<guestfs_list_partitions> to list
+actual device names, and then use those names directly.
+
+Since those device names exist by definition, they will never be
+translated.
+
+=item *
+
+Use higher level ways to identify filesystems, such as LVM names,
+UUIDs and filesystem labels.
+
+=back
+
+=head1 INTERNALS
+
+=head2 COMMUNICATION PROTOCOL
+
+Don't rely on using this protocol directly. This section documents
+how it currently works, but it may change at any time.
+
+The protocol used to talk between the library and the daemon running
+inside the qemu virtual machine is a simple RPC mechanism built on top
+of XDR (RFC 1014, RFC 1832, RFC 4506).
+
+The detailed format of structures is in C<src/guestfs_protocol.x>
+(note: this file is automatically generated).
+
+There are two broad cases, ordinary functions that don't have any
+C<FileIn> and C<FileOut> parameters, which are handled with very
+simple request/reply messages. Then there are functions that have any
+C<FileIn> or C<FileOut> parameters, which use the same request and
+reply messages, but they may also be followed by files sent using a
+chunked encoding.
+
+=head3 ORDINARY FUNCTIONS (NO FILEIN/FILEOUT PARAMS)
+
+For ordinary functions, the request message is:
+
+ total length (header + arguments,
+ but not including the length word itself)
+ struct guestfs_message_header (encoded as XDR)
+ struct guestfs_<foo>_args (encoded as XDR)
+
+The total length field allows the daemon to allocate a fixed size
+buffer into which it slurps the rest of the message. As a result, the
+total length is limited to C<GUESTFS_MESSAGE_MAX> bytes (currently
+4MB), which means the effective size of any request is limited to
+somewhere under this size.
+
+Note also that many functions don't take any arguments, in which case
+the C<guestfs_I<foo>_args> is completely omitted.
+
+The header contains the procedure number (C<guestfs_proc>) which is
+how the receiver knows what type of args structure to expect, or none
+at all.
+
+The reply message for ordinary functions is:
+
+ total length (header + ret,
+ but not including the length word itself)
+ struct guestfs_message_header (encoded as XDR)
+ struct guestfs_<foo>_ret (encoded as XDR)
+
+As above the C<guestfs_I<foo>_ret> structure may be completely omitted
+for functions that return no formal return values.
+
+As above the total length of the reply is limited to
+C<GUESTFS_MESSAGE_MAX>.
+
+In the case of an error, a flag is set in the header, and the reply
+message is slightly changed:
+
+ total length (header + error,
+ but not including the length word itself)
+ struct guestfs_message_header (encoded as XDR)
+ struct guestfs_message_error (encoded as XDR)
+
+The C<guestfs_message_error> structure contains the error message as a
+string.
+
+=head3 FUNCTIONS THAT HAVE FILEIN PARAMETERS
+
+A C<FileIn> parameter indicates that we transfer a file I<into> the
+guest. The normal request message is sent (see above). However this
+is followed by a sequence of file chunks.
+
+ total length (header + arguments,
+ but not including the length word itself,
+ and not including the chunks)
+ struct guestfs_message_header (encoded as XDR)
+ struct guestfs_<foo>_args (encoded as XDR)
+ sequence of chunks for FileIn param #0
+ sequence of chunks for FileIn param #1 etc.
+
+The "sequence of chunks" is:
+
+ length of chunk (not including length word itself)
+ struct guestfs_chunk (encoded as XDR)
+ length of chunk
+ struct guestfs_chunk (encoded as XDR)
+ ...
+ length of chunk
+ struct guestfs_chunk (with data.data_len == 0)
+
+The final chunk has the C<data_len> field set to zero. Additionally a
+flag is set in the final chunk to indicate either successful
+completion or early cancellation.
+
+At time of writing there are no functions that have more than one
+FileIn parameter. However this is (theoretically) supported, by
+sending the sequence of chunks for each FileIn parameter one after
+another (from left to right).
+
+Both the library (sender) I<and> the daemon (receiver) may cancel the
+transfer. The library does this by sending a chunk with a special
+flag set to indicate cancellation. When the daemon sees this, it
+cancels the whole RPC, does I<not> send any reply, and goes back to
+reading the next request.
+
+The daemon may also cancel. It does this by writing a special word
+C<GUESTFS_CANCEL_FLAG> to the socket. The library listens for this
+during the transfer, and if it gets it, it will cancel the transfer
+(it sends a cancel chunk). The special word is chosen so that even if
+cancellation happens right at the end of the transfer (after the
+library has finished writing and has started listening for the reply),
+the "spurious" cancel flag will not be confused with the reply
+message.
+
+This protocol allows the transfer of arbitrary sized files (no 32 bit
+limit), and also files where the size is not known in advance
+(eg. from pipes or sockets). However the chunks are rather small
+(C<GUESTFS_MAX_CHUNK_SIZE>), so that neither the library nor the
+daemon need to keep much in memory.
+
+=head3 FUNCTIONS THAT HAVE FILEOUT PARAMETERS
+
+The protocol for FileOut parameters is exactly the same as for FileIn
+parameters, but with the roles of daemon and library reversed.
+
+ total length (header + ret,
+ but not including the length word itself,
+ and not including the chunks)
+ struct guestfs_message_header (encoded as XDR)
+ struct guestfs_<foo>_ret (encoded as XDR)
+ sequence of chunks for FileOut param #0
+ sequence of chunks for FileOut param #1 etc.
+
+=head3 INITIAL MESSAGE
+
+Because the underlying channel (QEmu -net channel) doesn't have any
+sort of connection control, when the daemon launches it sends an
+initial word (C<GUESTFS_LAUNCH_FLAG>) which indicates that the guest
+and daemon is alive. This is what C<guestfs_wait_ready> waits for.
+
+=head1 QEMU WRAPPERS
+
+If you want to compile your own qemu, run qemu from a non-standard
+location, or pass extra arguments to qemu, then you can write a
+shell-script wrapper around qemu.
+
+There is one important rule to remember: you I<must C<exec qemu>> as
+the last command in the shell script (so that qemu replaces the shell
+and becomes the direct child of the libguestfs-using program). If you
+don't do this, then the qemu process won't be cleaned up correctly.
+
+Here is an example of a wrapper, where I have built my own copy of
+qemu from source:
+
+ #!/bin/sh -
+ qemudir=/home/rjones/d/qemu
+ exec $qemudir/x86_64-softmmu/qemu-system-x86_64 -L $qemudir/pc-bios "$@"
+
+Save this script as C</tmp/qemu.wrapper> (or wherever), C<chmod +x>,
+and then use it by setting the LIBGUESTFS_QEMU environment variable.
+For example:
+
+ LIBGUESTFS_QEMU=/tmp/qemu.wrapper guestfish
+