Add 'readdir' call.

[libguestfs.git] / guestfish-actions.pod

diff --git a/guestfish-actions.pod b/guestfish-actions.pod
index a3592ad..e635e54 100644 (file)
--- a/guestfish-actions.pod
+++ b/guestfish-actions.pod
@@ -26,7 +26,8 @@ for whatever operations you want to perform (ie. read access if you
 just want to read the image or write access if you want to modify the
 image).
 
 just want to read the image or write access if you want to modify the
 image).
 

-This is equivalent to the qemu parameter C<-drive file=filename,cache=off>.
+This is equivalent to the qemu parameter
+C<-drive file=filename,cache=off,if=virtio>.

 
 Note that this call checks for the existence of C<filename>.  This
 stops you from specifying other types of drive which are supported
 
 Note that this call checks for the existence of C<filename>.  This
 stops you from specifying other types of drive which are supported


@@ -47,7 +48,7 @@ handle is closed.  We don't currently have any method to enable
 changes to be committed, although qemu can support this.
 
 This is equivalent to the qemu parameter
 changes to be committed, although qemu can support this.
 
 This is equivalent to the qemu parameter

-C<-drive file=filename,snapshot=on>.
+C<-drive file=filename,snapshot=on,if=virtio>.

 
 Note that this call checks for the existence of C<filename>.  This
 stops you from specifying other types of drive which are supported
 
 Note that this call checks for the existence of C<filename>.  This
 stops you from specifying other types of drive which are supported


@@ -685,6 +686,20 @@ C<device>.
 This returns the ext2/3/4 filesystem UUID of the filesystem on
 C<device>.
 
 This returns the ext2/3/4 filesystem UUID of the filesystem on
 C<device>.
 

+=head2 get-memsize
+
+ get-memsize
+
+This gets the memory size in megabytes allocated to the
+qemu subprocess.
+
+If C<set-memsize> was not called
+on this handle, and if C<LIBGUESTFS_MEMSIZE> was not set,
+then this returns the compiled-in default value for memsize.
+
+For more information on the architecture of libguestfs,
+see L<guestfs(3)>.
+

 =head2 get-path
 
  get-path
 =head2 get-path
 
  get-path


@@ -1006,6 +1021,14 @@ directory and its contents after use.
 
 See also: L<mkdtemp(3)>
 
 
 See also: L<mkdtemp(3)>
 

+=head2 mkfifo
+
+ mkfifo mode path
+
+This call creates a FIFO (named pipe) called C<path> with
+mode C<mode>.  It is just a convenient wrapper around
+C<mknod>.
+

 =head2 mkfs
 
  mkfs fstype device
 =head2 mkfs
 
  mkfs fstype device


@@ -1014,6 +1037,52 @@ This creates a filesystem on C<device> (usually a partition
 or LVM logical volume).  The filesystem type is C<fstype>, for
 example C<ext3>.
 
 or LVM logical volume).  The filesystem type is C<fstype>, for
 example C<ext3>.
 

+=head2 mknod
+
+ mknod mode devmajor devminor path
+
+This call creates block or character special devices, or
+named pipes (FIFOs).
+
+The C<mode> parameter should be the mode, using the standard
+constants.  C<devmajor> and C<devminor> are the
+device major and minor numbers, only used when creating block
+and character special devices.
+
+=head2 mknod-b
+
+ mknod-b mode devmajor devminor path
+
+This call creates a block device node called C<path> with
+mode C<mode> and device major/minor C<devmajor> and C<devminor>.
+It is just a convenient wrapper around C<mknod>.
+
+=head2 mknod-c
+
+ mknod-c mode devmajor devminor path
+
+This call creates a char device node called C<path> with
+mode C<mode> and device major/minor C<devmajor> and C<devminor>.
+It is just a convenient wrapper around C<mknod>.
+
+=head2 mkswap
+
+ mkswap device
+
+Create a swap partition on C<device>.
+
+=head2 mkswap-L
+
+ mkswap-L label device
+
+Create a swap partition on C<device> with label C<label>.
+
+=head2 mkswap-U
+
+ mkswap-U uuid device
+
+Create a swap partition on C<device> with UUID C<uuid>.
+

 =head2 mount
 
  mount device mountpoint
 =head2 mount
 
  mount device mountpoint


@@ -1166,6 +1235,20 @@ Note that this function cannot correctly handle binary files
 as end of line).  For those you need to use the C<read-file>
 function which has a more complex interface.
 
 as end of line).  For those you need to use the C<read-file>
 function which has a more complex interface.
 

+=head2 readdir
+
+ readdir dir
+
+This returns the list of directory entries in directory C<dir>.
+
+All entries in the directory are returned, including C<.> and
+C<..>.  The entries are I<not> sorted, but returned in the same
+order as the underlying filesystem.
+
+This function is primarily intended for use by programs.  To
+get a simple list of names, use C<ls>.  To get a printable
+directory for human consumption, use C<ll>.
+

 =head2 resize2fs
 
  resize2fs device
 =head2 resize2fs
 
  resize2fs device


@@ -1285,6 +1368,21 @@ L<tune2fs(8)> manpage.
 You can use either C<tune2fs-l> or C<get-e2uuid>
 to return the existing UUID of a filesystem.
 
 You can use either C<tune2fs-l> or C<get-e2uuid>
 to return the existing UUID of a filesystem.
 

+=head2 set-memsize | memsize
+
+ set-memsize memsize
+
+This sets the memory size in megabytes allocated to the
+qemu subprocess.  This only has any effect if called before
+C<launch>.
+
+You can also change this by setting the environment
+variable C<LIBGUESTFS_MEMSIZE> before the handle is
+created.
+
+For more information on the architecture of libguestfs,
+see L<guestfs(3)>.
+

 =head2 set-path | path
 
  set-path path
 =head2 set-path | path
 
  set-path path


@@ -1570,6 +1668,26 @@ manpage for more details.  The list of fields returned isn't
 clearly defined, and depends on both the version of C<tune2fs>
 that libguestfs was built against, and the filesystem itself.
 
 clearly defined, and depends on both the version of C<tune2fs>
 that libguestfs was built against, and the filesystem itself.
 

+=head2 umask
+
+ umask mask
+
+This function sets the mask used for creating new files and
+device nodes to C<mask & 0777>.
+
+Typical umask values would be C<022> which creates new files
+with permissions like "-rw-r--r--" or "-rwxr-xr-x", and
+C<002> which creates new files with permissions like
+"-rw-rw-r--" or "-rwxrwxr-x".
+
+The default umask is C<022>.  This is important because it
+means that directories and device nodes will be created with
+C<0644> or C<0755> mode even if you specify C<0777>.
+
+See also L<umask(2)>, C<mknod>, C<mkdir>.
+
+This call returns the previous umask.
+

 =head2 umount | unmount
 
  umount pathordevice
 =head2 umount | unmount
 
  umount pathordevice