1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) YEAR Red Hat Inc.
3 # This file is distributed under the same license as the PACKAGE package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
9 "Project-Id-Version: PACKAGE VERSION\n"
10 "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?"
11 "component=libguestfs&product=Virtualization+Tools\n"
12 "POT-Creation-Date: 2009-07-14 14:51+0100\n"
13 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
14 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
15 "Language-Team: LANGUAGE <LL@li.org>\n"
17 "Content-Type: text/plain; charset=CHARSET\n"
18 "Content-Transfer-Encoding: 8bit\n"
22 msgid "use 'alloc file size' to create an image\n"
27 msgid "can't allocate or add disks after launching\n"
30 #: fish/alloc.c:94 fish/alloc.c:101
32 msgid "could not parse size specification '%s'\n"
37 msgid "use '%s filename' to edit a file\n"
43 "guestfish: guest filesystem shell\n"
44 "guestfish lets you edit virtual machine filesystems\n"
45 "Copyright (C) 2009 Red Hat Inc.\n"
47 " guestfish [--options] cmd [: cmd : cmd ...]\n"
48 " guestfish -i libvirt-domain\n"
49 " guestfish -i disk-image(s)\n"
50 "or for interactive use:\n"
52 "or from a shell script:\n"
58 " -h|--cmd-help List available commands\n"
59 " -h|--cmd-help cmd Display detailed help on 'cmd'\n"
60 " -a|--add image Add image\n"
61 " -D|--no-dest-paths Don't tab-complete paths from guest fs\n"
62 " -f|--file file Read commands from file\n"
63 " -i|--inspector Run virt-inspector to get disk mountpoints\n"
64 " --listen Listen for remote commands\n"
65 " -m|--mount dev[:mnt] Mount dev on mnt (if omitted, /)\n"
66 " -n|--no-sync Don't autosync\n"
67 " --remote[=pid] Send commands to remote guestfish\n"
68 " -r|--ro Mount read-only\n"
69 " -v|--verbose Verbose messages\n"
70 " -x Echo each command before executing it\n"
71 " -V|--version Display version and exit\n"
72 "For more information, see the manpage guestfish(1).\n"
77 msgid "guestfs_create: failed to create handle\n"
82 msgid "guestfish: --listen=PID: PID was not a number: %s\n"
88 "guestfish: remote: $GUESTFISH_PID must be set to the PID of the remote "
94 msgid "guestfish: unknown long option: %s (%d)\n"
99 msgid "guestfish: only one -f parameter can be given\n"
104 msgid "guestfish: unexpected command line option 0x%x\n"
109 msgid "guestfish: cannot use -i option with -a, -m, --listen or --remote\n"
114 msgid "guestfish -i requires a libvirt domain or path(s) to disk image(s)\n"
119 msgid "guestfish: virt-inspector command too long for fixed-size buffer\n"
124 msgid "guestfish: cannot use --listen and --remote options at the same time\n"
129 msgid "guestfish: extra parameters on the command line with --listen flag\n"
134 msgid "guestfish: cannot use --listen and --file options at the same time\n"
141 "Welcome to guestfish, the libguestfs filesystem interactive shell for\n"
142 "editing virtual machine filesystems.\n"
144 "Type: 'help' for help with commands\n"
145 " 'quit' to quit the shell\n"
151 msgid "guestfish: unterminated double quote\n"
154 #: fish/fish.c:602 fish/fish.c:617
156 msgid "guestfish: command arguments not separated by whitespace\n"
161 msgid "guestfish: unterminated single quote\n"
166 msgid "guestfish: internal error parsing string at '%s'\n"
171 msgid "guestfish: too many arguments\n"
176 msgid "guestfish: empty command on command line\n"
180 msgid "display a list of commands or help on a command"
184 msgid "quit guestfish"
188 msgid "allocate an image"
192 msgid "display a line of text"
196 msgid "edit a file in the image"
200 msgid "local change directory"
204 msgid "expand wildcards in command"
208 msgid "view a file in the pager"
212 msgid "close and reopen libguestfs handle"
216 msgid "measure time taken to run command"
222 "alloc - allocate an image\n"
223 " alloc <filename> <size>\n"
225 " This creates an empty (zeroed) file of the given size,\n"
226 " and then adds so it can be further examined.\n"
228 " For more advanced image creation, see qemu-img utility.\n"
230 " Size can be specified (where <nn> means a number):\n"
231 " <nn> number of kilobytes\n"
232 " eg: 1440 standard 3.5\" floppy\n"
233 " <nn>K or <nn>KB number of kilobytes\n"
234 " <nn>M or <nn>MB number of megabytes\n"
235 " <nn>G or <nn>GB number of gigabytes\n"
236 " <nn>sects number of 512 byte sectors\n"
242 "echo - display a line of text\n"
243 " echo [<params> ...]\n"
245 " This echos the parameters to the terminal.\n"
251 "edit - edit a file in the image\n"
254 " This is used to edit a file.\n"
256 " It is the equivalent of (and is implemented by)\n"
257 " running \"cat\", editing locally, and then \"write-file\".\n"
259 " Normally it uses $EDITOR, but if you use the aliases\n"
260 " \"vi\" or \"emacs\" you will get those editors.\n"
262 " NOTE: This will not work reliably for large files\n"
263 " (> 2 MB) or binary files containing \\0 bytes.\n"
269 "lcd - local change directory\n"
272 " Change guestfish's current directory. This command is\n"
273 " useful if you want to download files to a particular\n"
280 "glob - expand wildcards in command\n"
281 " glob <command> [<args> ...]\n"
283 " Glob runs <command> with wildcards expanded in any\n"
284 " command args. Note that the command is run repeatedly\n"
285 " once for each expanded argument.\n"
291 "help - display a list of commands or help on a command\n"
299 "more - view a file in the pager\n"
302 " This is used to view a file in the pager.\n"
304 " It is the equivalent of (and is implemented by)\n"
305 " running \"cat\" and using the pager.\n"
307 " Normally it uses $PAGER, but if you use the alias\n"
308 " \"less\" then it always uses \"less\".\n"
310 " NOTE: This will not work reliably for large files\n"
311 " (> 2 MB) or binary files containing \\0 bytes.\n"
317 "quit - quit guestfish\n"
324 "reopen - close and reopen the libguestfs handle\n"
327 "Close and reopen the libguestfs handle. It is not necessary to use\n"
328 "this normally, because the handle is closed properly when guestfish\n"
329 "exits. However this is occasionally useful for testing.\n"
335 "time - measure time taken to run command\n"
336 " time <command> [<args> ...]\n"
338 " This runs <command> as usual, and prints the elapsed\n"
339 " time afterwards.\n"
344 msgid "%s: command not known, use -h to list all commands\n"
349 msgid "use 'glob command [args...]'\n"
354 msgid "glob: guestfs_glob_expand call failed: %s\n"
359 msgid "use 'lcd directory' to change local directory\n"
364 msgid "use '%s filename' to page a file\n"
369 msgid "use 'time command [args...]'\n"
374 msgid "guestfs_close: called twice on the same handle\n"
379 msgid "libguestfs: error: %s\n"
383 msgid "command line cannot be altered after qemu subprocess launched"
387 msgid "guestfs_config: parameter must begin with '-' character"
392 msgid "guestfs_config: parameter '%s' isn't allowed"
395 #: src/guestfs.c:781 src/guestfs.c:803 src/guestfs.c:821
396 msgid "filename cannot contain ',' (comma) character"
400 msgid "you must call guestfs_add_drive before guestfs_launch"
404 msgid "qemu has already been launched"
409 msgid "%s: cannot create temporary directory"
414 msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
417 #: src/guestfs.c:1200
418 msgid "failed to connect to vmchannel socket"
421 #: src/guestfs.c:1219
422 msgid "could not watch qemu stdout"
425 #: src/guestfs.c:1287
427 msgid "external command failed: %s"
430 #: src/guestfs.c:1326
433 "%s: command failed: If qemu is located on a non-standard path, try setting "
434 "the LIBGUESTFS_QEMU environment variable."
437 #: src/guestfs.c:1399
438 msgid "qemu has finished launching already"
441 #: src/guestfs.c:1404
442 msgid "qemu has not been launched yet"
445 #: src/guestfs.c:1417
446 msgid "guestfs_wait_ready failed, see earlier error messages"
449 #: src/guestfs.c:1427
450 msgid "qemu launched and contacted daemon, but state != READY"
453 #: src/guestfs.c:1438
454 msgid "no subprocess to kill"
457 #: src/guestfs.c:1486
459 msgid "guestfs_set_ready: called when in state %d != BUSY"
462 #: src/guestfs.c:1498
464 msgid "guestfs_set_busy: called when in state %d != READY"
467 #: src/guestfs.c:1519
469 msgid "guestfs_end_busy: called when in state %d"
472 #: src/guestfs.c:1577
474 msgid "stdout_event: internal error: %d != %d"
477 #: src/guestfs.c:1620
479 msgid "sock_read_event: internal error: %d != %d"
482 #: src/guestfs.c:1650
483 msgid "can't decode length word"
486 #: src/guestfs.c:1660
488 msgid "received magic signature from guestfsd, but in state %d"
491 #: src/guestfs.c:1663
493 msgid "received magic signature from guestfsd, but msg size is %d"
496 #: src/guestfs.c:1688
498 msgid "message length (%u) > maximum possible size (%d)"
501 #: src/guestfs.c:1721
503 msgid "state %d != BUSY"
506 #: src/guestfs.c:1761
508 msgid "sock_write_event: internal error: %d != %d"
511 #: src/guestfs.c:1766
513 msgid "sock_write_event: state %d != BUSY"
516 #: src/guestfs.c:1873 src/guestfs.c:1896
517 msgid "remove_handle failed"
520 #: src/guestfs.c:1884 src/guestfs.c:1907
521 msgid "add_handle failed"
524 #: src/guestfs.c:1940
526 msgid "guestfs__send_sync: state %d != BUSY"
529 #: src/guestfs.c:1948 src/guestfs.c:2128
530 msgid "guestfs__send_sync: msg_out should be NULL"
533 #: src/guestfs.c:1970
534 msgid "xdr_guestfs_message_header failed"
537 #: src/guestfs.c:1979
538 msgid "dispatch failed to marshal args"
541 #: src/guestfs.c:2005
542 msgid "send failed, see earlier error messages"
545 #: src/guestfs.c:2120
547 msgid "send_file_chunk_sync: state %d != READY"
550 #: src/guestfs.c:2151
552 msgid "xdr_guestfs_chunk failed (buf = %p, buflen = %zu)"
555 #: src/guestfs.c:2176
556 msgid "send file chunk failed, see earlier error messages"
559 #: src/guestfs.c:2227
561 msgid "check_for_daemon_cancellation: read 0x%x from daemon, expected 0x%x\n"
564 #: src/guestfs.c:2265
566 msgid "%s: error in chunked encoding"
569 #: src/guestfs.c:2293
570 msgid "write to daemon socket"
573 #: src/guestfs.c:2340
574 msgid "failed to parse file chunk"
577 #: src/guestfs.c:2372
578 msgid "receive_file_data_sync: reply callback not called\n"
581 #: src/guestfs.c:2377
582 msgid "receive_file_data_sync: parse error in reply callback\n"
585 #: src/guestfs.c:2391
586 msgid "file receive cancelled by daemon"
589 #: src/guestfs.c:2426 src/guestfs.c:2484
591 msgid "fd %d is out of range"
594 #: src/guestfs.c:2434
596 msgid "set of events (0x%x) contains unknown events"
599 #: src/guestfs.c:2439
600 msgid "set of events is empty"
603 #: src/guestfs.c:2446
605 msgid "fd %d is already registered"
608 #: src/guestfs.c:2451
609 msgid "callback is NULL"
612 #: src/guestfs.c:2491
614 msgid "fd %d was not registered"
617 #: src/guestfs.c:2540
618 msgid "select_main_loop_run: this cannot be called recursively"