From: Richard W.M. Jones Date: Tue, 19 Oct 2010 14:18:15 +0000 (+0100) Subject: Version 1.5.22. X-Git-Tag: 1.5.22^0 X-Git-Url: http://git.annexia.org/?p=libguestfs.git;a=commitdiff_plain;h=dad3fcfefd7c013ecbe8fa04df032fefb619e7d6 Version 1.5.22. --- diff --git a/BUGS b/BUGS index 1fda3d1..ddfa579 100644 --- a/BUGS +++ b/BUGS @@ -1,5 +1,5 @@ NOTE: This file is automatically generated from "update-bugs". -Last updated: 2010-10-01 21:02:14 +Last updated: 2010-10-19 15:17:36 This contains a local list of the bugs that are open against libguestfs. Bugs are tracked in the Red Hat Bugzilla database @@ -35,6 +35,9 @@ Bugs in NEW or ASSIGNED state are open and waiting for someone to fix. 633174 NEW https://bugzilla.redhat.com/show_bug.cgi?id=633174 some guestfish sub commands can not handle special files properly +643991 NEW https://bugzilla.redhat.com/show_bug.cgi?id=643991 + CVE-2010-3851 libguestfs: missing disk format specifier when adding a disk [fedora-all] + 501884 NEW https://bugzilla.redhat.com/show_bug.cgi?id=501884 virt-inspector still configured, even if there are missing deps @@ -125,11 +128,8 @@ Bugs in NEW or ASSIGNED state are open and waiting for someone to fix. 627832 NEW https://bugzilla.redhat.com/show_bug.cgi?id=627832 [RFE] guestfish should print outputs in a suitable base (eg. octal for modes) -632918 NEW https://bugzilla.redhat.com/show_bug.cgi?id=632918 - Can't use virt-resize on Ubuntu 10.04 image - -634246 NEW https://bugzilla.redhat.com/show_bug.cgi?id=634246 - guestfs_part_get_parttype returns "loop" when run against a partition, LV or filesystem +634649 NEW https://bugzilla.redhat.com/show_bug.cgi?id=634649 + [RFE] Align a NTFS partition within qcow2 over LVM to start at offset which is a multiple of 8 635971 NEW https://bugzilla.redhat.com/show_bug.cgi?id=635971 glob mkfs ext2 /dev/vd[b-t]1 does not expand @@ -155,6 +155,24 @@ Bugs in NEW or ASSIGNED state are open and waiting for someone to fix. 639405 NEW https://bugzilla.redhat.com/show_bug.cgi?id=639405 Interrupted cached appliance creation leaves libguestfs unusable +642821 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642821 + virt-resize falls over on a disk image with a logical swap partition + +642929 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642929 + C inspection code should ignore /dev/fd* in /etc/fstab + +642930 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642930 + virt-inspector (Sys::Guestfs::Lib) should use C inspection APIs + +642932 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642932 + guestmount options should match guestfish options + +642933 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642933 + guestfs_list_filesystems should be used in all possible places + +642934 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642934 + No way to specify disk format when adding a disk to libguestfs + 501882 ASSIGNED https://bugzilla.redhat.com/show_bug.cgi?id=501882 /tmp/libguestfs temporary directory is not cleaned up @@ -176,6 +194,12 @@ Bugs in NEW or ASSIGNED state are open and waiting for someone to fix. 541618 ASSIGNED https://bugzilla.redhat.com/show_bug.cgi?id=541618 guestfish not able to mount freebsd ufs2 partitions automatically +639601 ASSIGNED https://bugzilla.redhat.com/show_bug.cgi?id=639601 + "virt-ls" command failed to parse domain name "#" + +639602 ASSIGNED https://bugzilla.redhat.com/show_bug.cgi?id=639602 + ""virt-list-filesystems" fails to parse the command line argument if the domain name is "#". + -------------------------------------------------- Bugs in MODIFIED, POST or ON_QA state are fixed. You can help by testing the fixes. @@ -240,9 +264,6 @@ You can help by testing the fixes. 602592 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=602592 [RFE] expose guestfs_close in perl bindings -610880 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=610880 - libguestfs should set broader read perms on tmpdir, so works in some situations when executed with umask 077 - 619334 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=619334 RFE: Enable coredump capture in the appliance @@ -252,9 +273,24 @@ You can help by testing the fixes. 633766 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=633766 virt-resize --shrink fails +634246 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=634246 + guestfs_part_get_parttype returns "loop" when run against a partition, LV or filesystem + 635969 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=635969 glob echo mkfs ext2 /dev/vd[b-t]1 prints garbage +639986 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=639986 + virt-df --csv does not properly quote " in libvirt domain names + +640961 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=640961 + Document that grub-install might be needed for old Linux guests after virt-resize + +642826 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=642826 + virt-resize converts any other image format to raw without notifying user, instructions do not account for this + +643624 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=643624 + libguestfs tools documentation should describe how to quote guest domain names from shell + -------------------------------------------------- These bugs are in the VERIFIED state. diff --git a/configure.ac b/configure.ac index ff14fbb..455ffd1 100644 --- a/configure.ac +++ b/configure.ac @@ -18,7 +18,7 @@ # major/minor/release must be numbers m4_define([libguestfs_major], [1]) m4_define([libguestfs_minor], [5]) -m4_define([libguestfs_release], [21]) +m4_define([libguestfs_release], [22]) # extra can be any string m4_define([libguestfs_extra], []) diff --git a/po-docs/ja.po b/po-docs/ja.po index 42a0e98..aa1f58f 100644 --- a/po-docs/ja.po +++ b/po-docs/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: libguestfs@redhat.com\n" -"POT-Creation-Date: 2010-10-01 21:02+0200\n" +"POT-Creation-Date: 2010-10-19 15:17+0200\n" "PO-Revision-Date: 2010-09-02 14:46+0100\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -776,8 +776,8 @@ msgstr "" #: ../fish/guestfish-actions.pod:1168 ../fish/guestfish-actions.pod:1173 #: ../fish/guestfish-actions.pod:1215 ../fish/guestfish-actions.pod:1219 #: ../fish/guestfish-actions.pod:1224 ../tools/virt-df.pl:144 -#: ../tools/virt-df.pl:150 ../tools/virt-resize.pl:324 -#: ../tools/virt-resize.pl:329 ../tools/virt-resize.pl:339 +#: ../tools/virt-df.pl:150 ../tools/virt-resize.pl:348 +#: ../tools/virt-resize.pl:353 ../tools/virt-resize.pl:363 msgid "*" msgstr "" @@ -3430,12 +3430,12 @@ msgstr "" # type: =head1 #: ../src/guestfs.pod:1726 ../fish/guestfish.pod:950 #: ../test-tool/libguestfs-test-tool.pod:109 ../fuse/guestmount.pod:178 -#: ../inspector/virt-inspector.pl:846 ../tools/virt-edit.pl:325 -#: ../tools/virt-win-reg.pl:461 ../tools/virt-df.pl:536 -#: ../tools/virt-ls.pl:210 ../tools/virt-resize.pl:1399 -#: ../tools/virt-list-filesystems.pl:191 ../tools/virt-cat.pl:163 -#: ../tools/virt-tar.pl:257 ../tools/virt-rescue.pl:231 -#: ../tools/virt-make-fs.pl:527 ../tools/virt-list-partitions.pl:229 +#: ../inspector/virt-inspector.pl:853 ../tools/virt-edit.pl:332 +#: ../tools/virt-win-reg.pl:468 ../tools/virt-df.pl:573 +#: ../tools/virt-ls.pl:217 ../tools/virt-resize.pl:1447 +#: ../tools/virt-list-filesystems.pl:198 ../tools/virt-cat.pl:170 +#: ../tools/virt-tar.pl:264 ../tools/virt-rescue.pl:238 +#: ../tools/virt-make-fs.pl:534 ../tools/virt-list-partitions.pl:236 msgid "SEE ALSO" msgstr "" @@ -3457,8 +3457,8 @@ msgid "" msgstr "" # type: =head1 -#: ../src/guestfs.pod:1753 ../tools/virt-win-reg.pl:476 -#: ../tools/virt-make-fs.pl:541 +#: ../src/guestfs.pod:1753 ../tools/virt-win-reg.pl:483 +#: ../tools/virt-make-fs.pl:548 msgid "BUGS" msgstr "" @@ -3516,7 +3516,7 @@ msgstr "" # type: =head1 #: ../src/guestfs.pod:1786 ../fish/guestfish.pod:967 #: ../test-tool/libguestfs-test-tool.pod:115 ../fuse/guestmount.pod:189 -#: ../inspector/virt-inspector.pl:855 +#: ../inspector/virt-inspector.pl:862 msgid "AUTHORS" msgstr "" @@ -3529,12 +3529,12 @@ msgstr "" # type: =head1 #: ../src/guestfs.pod:1790 ../fish/guestfish.pod:971 #: ../test-tool/libguestfs-test-tool.pod:119 ../fuse/guestmount.pod:193 -#: ../inspector/virt-inspector.pl:861 ../tools/virt-edit.pl:341 -#: ../tools/virt-win-reg.pl:491 ../tools/virt-df.pl:549 -#: ../tools/virt-ls.pl:225 ../tools/virt-resize.pl:1420 -#: ../tools/virt-list-filesystems.pl:207 ../tools/virt-cat.pl:177 -#: ../tools/virt-tar.pl:272 ../tools/virt-rescue.pl:245 -#: ../tools/virt-make-fs.pl:556 ../tools/virt-list-partitions.pl:244 +#: ../inspector/virt-inspector.pl:868 ../tools/virt-edit.pl:348 +#: ../tools/virt-win-reg.pl:498 ../tools/virt-df.pl:586 +#: ../tools/virt-ls.pl:232 ../tools/virt-resize.pl:1473 +#: ../tools/virt-list-filesystems.pl:214 ../tools/virt-cat.pl:184 +#: ../tools/virt-tar.pl:279 ../tools/virt-rescue.pl:252 +#: ../tools/virt-make-fs.pl:563 ../tools/virt-list-partitions.pl:251 msgid "COPYRIGHT" msgstr "" @@ -15051,7 +15051,7 @@ msgstr "" #: ../fish/guestfish.pod:148 ../test-tool/libguestfs-test-tool.pod:37 #: ../fuse/guestmount.pod:70 ../inspector/virt-inspector.pl:75 #: ../tools/virt-edit.pl:73 ../tools/virt-win-reg.pl:172 -#: ../tools/virt-df.pl:71 ../tools/virt-ls.pl:79 ../tools/virt-resize.pl:233 +#: ../tools/virt-df.pl:71 ../tools/virt-ls.pl:79 ../tools/virt-resize.pl:257 #: ../tools/virt-list-filesystems.pl:50 ../tools/virt-cat.pl:80 #: ../tools/virt-tar.pl:99 ../tools/virt-rescue.pl:103 #: ../tools/virt-make-fs.pl:153 ../tools/virt-list-partitions.pl:51 @@ -15062,7 +15062,7 @@ msgstr "" #: ../fish/guestfish.pod:152 ../fuse/guestmount.pod:94 #: ../inspector/virt-inspector.pl:83 ../tools/virt-edit.pl:81 #: ../tools/virt-win-reg.pl:180 ../tools/virt-df.pl:79 ../tools/virt-ls.pl:87 -#: ../tools/virt-resize.pl:241 ../tools/virt-list-filesystems.pl:58 +#: ../tools/virt-resize.pl:265 ../tools/virt-list-filesystems.pl:58 #: ../tools/virt-cat.pl:88 ../tools/virt-tar.pl:107 #: ../tools/virt-rescue.pl:111 ../tools/virt-make-fs.pl:161 #: ../tools/virt-list-partitions.pl:59 @@ -16806,13 +16806,13 @@ msgstr "" # type: textblock #: ../fish/guestfish.pod:976 ../test-tool/libguestfs-test-tool.pod:124 -#: ../fuse/guestmount.pod:198 ../inspector/virt-inspector.pl:865 -#: ../tools/virt-edit.pl:345 ../tools/virt-win-reg.pl:495 -#: ../tools/virt-df.pl:553 ../tools/virt-ls.pl:229 -#: ../tools/virt-resize.pl:1424 ../tools/virt-list-filesystems.pl:211 -#: ../tools/virt-cat.pl:181 ../tools/virt-tar.pl:276 -#: ../tools/virt-rescue.pl:249 ../tools/virt-make-fs.pl:560 -#: ../tools/virt-list-partitions.pl:248 +#: ../fuse/guestmount.pod:198 ../inspector/virt-inspector.pl:872 +#: ../tools/virt-edit.pl:352 ../tools/virt-win-reg.pl:502 +#: ../tools/virt-df.pl:590 ../tools/virt-ls.pl:236 +#: ../tools/virt-resize.pl:1477 ../tools/virt-list-filesystems.pl:218 +#: ../tools/virt-cat.pl:188 ../tools/virt-tar.pl:283 +#: ../tools/virt-rescue.pl:256 ../tools/virt-make-fs.pl:567 +#: ../tools/virt-list-partitions.pl:255 msgid "" "This program is free software; you can redistribute it and/or modify it " "under the terms of the GNU General Public License as published by the Free " @@ -16822,13 +16822,13 @@ msgstr "" # type: textblock #: ../fish/guestfish.pod:981 ../test-tool/libguestfs-test-tool.pod:129 -#: ../fuse/guestmount.pod:203 ../inspector/virt-inspector.pl:870 -#: ../tools/virt-edit.pl:350 ../tools/virt-win-reg.pl:500 -#: ../tools/virt-df.pl:558 ../tools/virt-ls.pl:234 -#: ../tools/virt-resize.pl:1429 ../tools/virt-list-filesystems.pl:216 -#: ../tools/virt-cat.pl:186 ../tools/virt-tar.pl:281 -#: ../tools/virt-rescue.pl:254 ../tools/virt-make-fs.pl:565 -#: ../tools/virt-list-partitions.pl:253 +#: ../fuse/guestmount.pod:203 ../inspector/virt-inspector.pl:877 +#: ../tools/virt-edit.pl:357 ../tools/virt-win-reg.pl:507 +#: ../tools/virt-df.pl:595 ../tools/virt-ls.pl:241 +#: ../tools/virt-resize.pl:1482 ../tools/virt-list-filesystems.pl:223 +#: ../tools/virt-cat.pl:193 ../tools/virt-tar.pl:288 +#: ../tools/virt-rescue.pl:261 ../tools/virt-make-fs.pl:572 +#: ../tools/virt-list-partitions.pl:260 msgid "" "This program is distributed in the hope that it will be useful, but WITHOUT " "ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or " @@ -16838,13 +16838,13 @@ msgstr "" # type: textblock #: ../fish/guestfish.pod:986 ../test-tool/libguestfs-test-tool.pod:134 -#: ../fuse/guestmount.pod:208 ../inspector/virt-inspector.pl:875 -#: ../tools/virt-edit.pl:355 ../tools/virt-win-reg.pl:505 -#: ../tools/virt-df.pl:563 ../tools/virt-ls.pl:239 -#: ../tools/virt-resize.pl:1434 ../tools/virt-list-filesystems.pl:221 -#: ../tools/virt-cat.pl:191 ../tools/virt-tar.pl:286 -#: ../tools/virt-rescue.pl:259 ../tools/virt-make-fs.pl:570 -#: ../tools/virt-list-partitions.pl:258 +#: ../fuse/guestmount.pod:208 ../inspector/virt-inspector.pl:882 +#: ../tools/virt-edit.pl:362 ../tools/virt-win-reg.pl:512 +#: ../tools/virt-df.pl:600 ../tools/virt-ls.pl:246 +#: ../tools/virt-resize.pl:1487 ../tools/virt-list-filesystems.pl:228 +#: ../tools/virt-cat.pl:198 ../tools/virt-tar.pl:293 +#: ../tools/virt-rescue.pl:266 ../tools/virt-make-fs.pl:577 +#: ../tools/virt-list-partitions.pl:265 msgid "" "You should have received a copy of the GNU General Public License along with " "this program; if not, write to the Free Software Foundation, Inc., 675 Mass " @@ -23509,7 +23509,7 @@ msgstr "" # type: =item #: ../inspector/virt-inspector.pl:91 ../tools/virt-edit.pl:89 #: ../tools/virt-win-reg.pl:188 ../tools/virt-df.pl:87 ../tools/virt-ls.pl:95 -#: ../tools/virt-resize.pl:249 ../tools/virt-list-filesystems.pl:66 +#: ../tools/virt-resize.pl:273 ../tools/virt-list-filesystems.pl:66 #: ../tools/virt-cat.pl:96 ../tools/virt-tar.pl:115 #: ../tools/virt-rescue.pl:119 ../tools/virt-make-fs.pl:169 #: ../tools/virt-list-partitions.pl:67 @@ -23519,7 +23519,7 @@ msgstr "" # type: textblock #: ../inspector/virt-inspector.pl:93 ../tools/virt-edit.pl:91 #: ../tools/virt-win-reg.pl:190 ../tools/virt-df.pl:89 ../tools/virt-ls.pl:97 -#: ../tools/virt-resize.pl:251 ../tools/virt-list-filesystems.pl:68 +#: ../tools/virt-resize.pl:275 ../tools/virt-list-filesystems.pl:68 #: ../tools/virt-cat.pl:98 ../tools/virt-tar.pl:117 #: ../tools/virt-rescue.pl:121 ../tools/virt-make-fs.pl:171 #: ../tools/virt-list-partitions.pl:69 @@ -23925,32 +23925,57 @@ msgstr "" msgid "Print the architecture of the kernel." msgstr "" +# type: =head2 +#: ../inspector/virt-inspector.pl:846 ../tools/virt-edit.pl:325 +#: ../tools/virt-win-reg.pl:142 ../tools/virt-win-reg.pl:461 +#: ../tools/virt-df.pl:566 ../tools/virt-ls.pl:210 +#: ../tools/virt-resize.pl:1440 ../tools/virt-list-filesystems.pl:191 +#: ../tools/virt-cat.pl:163 ../tools/virt-tar.pl:257 +#: ../tools/virt-rescue.pl:231 ../tools/virt-make-fs.pl:527 +#: ../tools/virt-list-partitions.pl:229 +msgid "SHELL QUOTING" +msgstr "" + # type: textblock -#: ../inspector/virt-inspector.pl:848 ../tools/virt-df.pl:538 +#: ../inspector/virt-inspector.pl:848 ../tools/virt-edit.pl:327 +#: ../tools/virt-win-reg.pl:463 ../tools/virt-df.pl:568 +#: ../tools/virt-ls.pl:212 ../tools/virt-resize.pl:1442 +#: ../tools/virt-list-filesystems.pl:193 ../tools/virt-cat.pl:165 +#: ../tools/virt-tar.pl:259 ../tools/virt-rescue.pl:233 +#: ../tools/virt-make-fs.pl:529 ../tools/virt-list-partitions.pl:231 +msgid "" +"Libvirt guest names can contain arbitrary characters, some of which have " +"meaning to the shell such as C<#> and space. You may need to quote or " +"escape these characters on the command line. See the shell manual page L for details." +msgstr "" + +# type: textblock +#: ../inspector/virt-inspector.pl:855 ../tools/virt-df.pl:575 msgid "" "L, L, L, L, " "L, L." msgstr "" # type: textblock -#: ../inspector/virt-inspector.pl:857 ../tools/virt-edit.pl:339 -#: ../tools/virt-win-reg.pl:489 ../tools/virt-df.pl:547 -#: ../tools/virt-ls.pl:223 ../tools/virt-resize.pl:1418 -#: ../tools/virt-list-filesystems.pl:205 ../tools/virt-cat.pl:175 -#: ../tools/virt-tar.pl:270 ../tools/virt-rescue.pl:243 -#: ../tools/virt-make-fs.pl:554 ../tools/virt-list-partitions.pl:242 +#: ../inspector/virt-inspector.pl:864 ../tools/virt-edit.pl:346 +#: ../tools/virt-win-reg.pl:496 ../tools/virt-df.pl:584 +#: ../tools/virt-ls.pl:230 ../tools/virt-resize.pl:1471 +#: ../tools/virt-list-filesystems.pl:212 ../tools/virt-cat.pl:182 +#: ../tools/virt-tar.pl:277 ../tools/virt-rescue.pl:250 +#: ../tools/virt-make-fs.pl:561 ../tools/virt-list-partitions.pl:249 msgid "Richard W.M. Jones L" msgstr "" # type: textblock -#: ../inspector/virt-inspector.pl:859 +#: ../inspector/virt-inspector.pl:866 msgid "Matthew Booth L" msgstr "" # type: textblock -#: ../inspector/virt-inspector.pl:863 ../tools/virt-ls.pl:227 -#: ../tools/virt-list-filesystems.pl:209 ../tools/virt-cat.pl:179 -#: ../tools/virt-tar.pl:274 +#: ../inspector/virt-inspector.pl:870 ../tools/virt-ls.pl:234 +#: ../tools/virt-list-filesystems.pl:216 ../tools/virt-cat.pl:186 +#: ../tools/virt-tar.pl:281 msgid "Copyright (C) 2009 Red Hat Inc." msgstr "" @@ -24261,7 +24286,7 @@ msgid "If not set, C is used." msgstr "" # type: textblock -#: ../tools/virt-edit.pl:327 +#: ../tools/virt-edit.pl:334 msgid "" "L, L, L, L, L, L, L, L, " @@ -24269,18 +24294,18 @@ msgid "" msgstr "" # type: =head1 -#: ../tools/virt-edit.pl:337 ../tools/virt-win-reg.pl:487 -#: ../tools/virt-df.pl:545 ../tools/virt-ls.pl:221 -#: ../tools/virt-resize.pl:1416 ../tools/virt-list-filesystems.pl:203 -#: ../tools/virt-cat.pl:173 ../tools/virt-tar.pl:268 -#: ../tools/virt-rescue.pl:241 ../tools/virt-make-fs.pl:552 -#: ../tools/virt-list-partitions.pl:240 +#: ../tools/virt-edit.pl:344 ../tools/virt-win-reg.pl:494 +#: ../tools/virt-df.pl:582 ../tools/virt-ls.pl:228 +#: ../tools/virt-resize.pl:1469 ../tools/virt-list-filesystems.pl:210 +#: ../tools/virt-cat.pl:180 ../tools/virt-tar.pl:275 +#: ../tools/virt-rescue.pl:248 ../tools/virt-make-fs.pl:559 +#: ../tools/virt-list-partitions.pl:247 msgid "AUTHOR" msgstr "" # type: textblock -#: ../tools/virt-edit.pl:343 ../tools/virt-df.pl:551 -#: ../tools/virt-rescue.pl:247 ../tools/virt-list-partitions.pl:246 +#: ../tools/virt-edit.pl:350 ../tools/virt-df.pl:588 +#: ../tools/virt-rescue.pl:254 ../tools/virt-list-partitions.pl:253 msgid "Copyright (C) 2009-2010 Red Hat Inc." msgstr "" @@ -24530,11 +24555,6 @@ msgstr "" msgid "This file would need conversion before you could C<--merge> it." msgstr "" -# type: =head2 -#: ../tools/virt-win-reg.pl:142 -msgid "SHELL QUOTING" -msgstr "" - # type: textblock #: ../tools/virt-win-reg.pl:144 msgid "" @@ -24599,7 +24619,7 @@ msgid "B<--debug>" msgstr "" # type: textblock -#: ../tools/virt-win-reg.pl:198 ../tools/virt-resize.pl:477 +#: ../tools/virt-win-reg.pl:198 ../tools/virt-resize.pl:501 msgid "Enable debugging messages." msgstr "" @@ -24645,7 +24665,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-win-reg.pl:463 +#: ../tools/virt-win-reg.pl:470 msgid "" "L, L, L, L, L, L, L, L, L " "output:" msgstr "" # type: verbatim -#: ../tools/virt-win-reg.pl:481 +#: ../tools/virt-win-reg.pl:488 #, no-wrap msgid "" " export LIBGUESTFS_DEBUG=1\n" @@ -24669,15 +24689,15 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-win-reg.pl:484 +#: ../tools/virt-win-reg.pl:491 msgid "" "Attach /tmp/virt-win-reg.log to a new bug report at L" msgstr "" # type: textblock -#: ../tools/virt-win-reg.pl:493 ../tools/virt-resize.pl:1422 -#: ../tools/virt-make-fs.pl:558 +#: ../tools/virt-win-reg.pl:500 ../tools/virt-resize.pl:1475 +#: ../tools/virt-make-fs.pl:565 msgid "Copyright (C) 2010 Red Hat Inc." msgstr "" @@ -24824,26 +24844,26 @@ msgid "" msgstr "" # type: =head1 -#: ../tools/virt-df.pl:512 +#: ../tools/virt-df.pl:542 msgid "NOTE ABOUT CSV FORMAT" msgstr "" # type: textblock -#: ../tools/virt-df.pl:514 +#: ../tools/virt-df.pl:544 msgid "" "Comma-separated values (CSV) is a deceptive format. It I like it " "should be easy to parse, but it is definitely not easy to parse." msgstr "" # type: textblock -#: ../tools/virt-df.pl:517 +#: ../tools/virt-df.pl:547 msgid "" "Myth: Just split fields at commas. Reality: This does I work " "reliably. This example has two columns:" msgstr "" # type: verbatim -#: ../tools/virt-df.pl:520 +#: ../tools/virt-df.pl:550 #, no-wrap msgid "" " \"foo,bar\",baz\n" @@ -24851,14 +24871,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-df.pl:522 +#: ../tools/virt-df.pl:552 msgid "" "Myth: Read the file one line at a time. Reality: This does I work " "reliably. This example has one row:" msgstr "" # type: verbatim -#: ../tools/virt-df.pl:525 +#: ../tools/virt-df.pl:555 #, no-wrap msgid "" " \"foo\n" @@ -24867,21 +24887,21 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-df.pl:528 +#: ../tools/virt-df.pl:558 msgid "" "For shell scripts, use C (L also " "packaged in major Linux distributions)." msgstr "" # type: textblock -#: ../tools/virt-df.pl:531 +#: ../tools/virt-df.pl:561 msgid "" "For other languages, use a CSV processing library (eg. C for Perl " "or Python's built-in csv library)." msgstr "" # type: textblock -#: ../tools/virt-df.pl:534 +#: ../tools/virt-df.pl:564 msgid "Most spreadsheets and databases can import CSV directly." msgstr "" @@ -25019,7 +25039,7 @@ msgid "You cannot combine these options." msgstr "" # type: textblock -#: ../tools/virt-ls.pl:212 +#: ../tools/virt-ls.pl:219 msgid "" "L, L, L, L, L, L, L, L to display the current partitions and sizes:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:105 +#: ../tools/virt-resize.pl:110 #, no-wrap msgid "" " # virt-list-partitions -lht /dev/vg/lv_guest\n" @@ -25160,32 +25194,32 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:110 +#: ../tools/virt-resize.pl:115 msgid "" "(This example is a virtual machine with an 8 GB disk which we would like to " "expand up to 10 GB)." msgstr "" # type: =item -#: ../tools/virt-resize.pl:113 +#: ../tools/virt-resize.pl:118 msgid "4. Create output disk" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:115 +#: ../tools/virt-resize.pl:120 msgid "" "Virt-resize cannot do in-place disk modifications. You have to have space " "to store the resized output disk." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:118 +#: ../tools/virt-resize.pl:123 msgid "" "To store the resized disk image in a file, create a file of a suitable size:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:121 +#: ../tools/virt-resize.pl:126 #, no-wrap msgid "" " # rm -f outdisk\n" @@ -25194,12 +25228,12 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:124 +#: ../tools/virt-resize.pl:129 msgid "Or use L to create a logical volume:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:126 +#: ../tools/virt-resize.pl:131 #, no-wrap msgid "" " # lvcreate -L 10G -n lv_name vg_name\n" @@ -25207,12 +25241,12 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:128 +#: ../tools/virt-resize.pl:133 msgid "Or use L vol-create-as to create a libvirt storage volume:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:130 +#: ../tools/virt-resize.pl:135 #, no-wrap msgid "" " # virsh pool-list\n" @@ -25221,12 +25255,12 @@ msgid "" msgstr "" # type: =item -#: ../tools/virt-resize.pl:133 +#: ../tools/virt-resize.pl:138 msgid "5. Resize" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:135 +#: ../tools/virt-resize.pl:140 msgid "" "virt-resize takes two mandatory parameters, the input disk (eg. device or " "file) and the output disk. The output disk is the one created in the " @@ -25234,7 +25268,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:139 +#: ../tools/virt-resize.pl:144 #, no-wrap msgid "" " # virt-resize indisk outdisk\n" @@ -25242,7 +25276,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:141 +#: ../tools/virt-resize.pl:146 msgid "" "This command just copies disk image C to disk image C " "I resizing or changing any existing partitions. If C is " @@ -25252,7 +25286,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:147 +#: ../tools/virt-resize.pl:152 msgid "" "More realistically you'd want to expand existing partitions in the disk " "image by passing extra options (for the full list see the L " @@ -25260,14 +25294,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:151 +#: ../tools/virt-resize.pl:156 msgid "" "L is the most useful option. It expands the named partition " "within the disk to fill any extra space:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:154 +#: ../tools/virt-resize.pl:159 #, no-wrap msgid "" " # virt-resize --expand /dev/sda2 indisk outdisk\n" @@ -25275,14 +25309,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:156 +#: ../tools/virt-resize.pl:161 msgid "" "(In this case, an extra partition is I created at the end of the disk, " "because there will be no unused space)." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:159 +#: ../tools/virt-resize.pl:164 msgid "" "L is the other commonly used option. The following would " "increase the size of /dev/sda1 by 200M, and expand /dev/sda2 to fill the " @@ -25290,7 +25324,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:163 +#: ../tools/virt-resize.pl:168 #, no-wrap msgid "" " # virt-resize --resize /dev/sda1=+200M --expand /dev/sda2 \\\n" @@ -25299,7 +25333,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:166 +#: ../tools/virt-resize.pl:171 msgid "" "If the expanded partition in the image contains a filesystem or LVM PV, then " "if virt-resize knows how, it will resize the contents, the equivalent of " @@ -25311,27 +25345,27 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:175 +#: ../tools/virt-resize.pl:180 msgid "Other options are covered below." msgstr "" # type: =item -#: ../tools/virt-resize.pl:177 +#: ../tools/virt-resize.pl:182 msgid "6. Test" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:179 +#: ../tools/virt-resize.pl:184 msgid "Thoroughly test the new disk image I discarding the old one." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:181 +#: ../tools/virt-resize.pl:186 msgid "If you are using libvirt, edit the XML to point at the new disk:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:183 +#: ../tools/virt-resize.pl:188 #, no-wrap msgid "" " # virsh edit guestname\n" @@ -25339,19 +25373,19 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:185 +#: ../tools/virt-resize.pl:190 msgid "" "Change Esource ...E, see L" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:188 +#: ../tools/virt-resize.pl:193 msgid "Then start up the domain with the new, resized disk:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:190 +#: ../tools/virt-resize.pl:195 #, no-wrap msgid "" " # virsh start guestname\n" @@ -25359,24 +25393,24 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:192 +#: ../tools/virt-resize.pl:197 msgid "" "and check that it still works. See also the L section below for " "additional information." msgstr "" # type: =item -#: ../tools/virt-resize.pl:195 +#: ../tools/virt-resize.pl:200 msgid "7. Resize LVs etc inside the guest" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:197 +#: ../tools/virt-resize.pl:202 msgid "(This can also be done offline using L)" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:199 +#: ../tools/virt-resize.pl:204 msgid "" "Once the guest has booted you should see the new space available, at least " "for filesystems that virt-resize knows how to resize, and for PVs. The user " @@ -25385,19 +25419,19 @@ msgid "" msgstr "" # type: =head2 -#: ../tools/virt-resize.pl:206 +#: ../tools/virt-resize.pl:211 msgid "SHRINKING A VIRTUAL MACHINE DISK" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:208 +#: ../tools/virt-resize.pl:213 msgid "" "Shrinking is somewhat more complex than expanding, and only an overview is " "given here." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:211 +#: ../tools/virt-resize.pl:216 msgid "" "Firstly virt-resize will not attempt to shrink any partition content (PVs, " "filesystems). The user has to shrink content before passing the disk image " @@ -25406,30 +25440,30 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:216 +#: ../tools/virt-resize.pl:221 msgid "(Shrinking can also be done offline using L)" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:218 +#: ../tools/virt-resize.pl:223 msgid "" "After shrinking PVs and filesystems, shut down the guest, and proceed with " "steps 3 and 4 above to allocate a new disk image." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:221 +#: ../tools/virt-resize.pl:226 msgid "" "Then run virt-resize with any of the C<--shrink> and/or C<--resize> options." msgstr "" # type: =head2 -#: ../tools/virt-resize.pl:224 +#: ../tools/virt-resize.pl:229 msgid "IGNORING OR DELETING PARTITIONS" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:226 +#: ../tools/virt-resize.pl:231 msgid "" "virt-resize also gives a convenient way to ignore or delete partitions when " "copying from the input disk to the output disk. Ignoring a partition speeds " @@ -25439,25 +25473,72 @@ msgid "" "leave some guests unbootable." msgstr "" +# type: =head2 +#: ../tools/virt-resize.pl:238 +msgid "QCOW2 AND NON-SPARSE RAW FORMATS" +msgstr "" + # type: textblock -#: ../tools/virt-resize.pl:243 +#: ../tools/virt-resize.pl:240 +msgid "" +"If the input disk is in qcow2 format, then you may prefer that the output is " +"in qcow2 format as well. Alternately, virt-resize can convert the format on " +"the fly. The output format is simply determined by the format of the empty " +"output container that you provide. Thus to create qcow2 output, use:" +msgstr "" + +# type: verbatim +#: ../tools/virt-resize.pl:246 +#, no-wrap +msgid "" +" qemu-img create [-c] -f qcow2 outdisk [size]\n" +"\n" +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:248 +msgid "instead of the truncate command (use C<-c> for a compressed disk)." +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:250 +msgid "Similarly, to get non-sparse raw output use:" +msgstr "" + +# type: verbatim +#: ../tools/virt-resize.pl:252 +#, no-wrap +msgid "" +" fallocate -l size outdisk\n" +"\n" +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:254 +msgid "" +"(on older systems that don't have the L command use C
)" +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:267 msgid "Display help." msgstr "" # type: =item -#: ../tools/virt-resize.pl:257 +#: ../tools/virt-resize.pl:281 msgid "B<--resize part=size>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:259 +#: ../tools/virt-resize.pl:283 msgid "" "Resize the named partition (expanding or shrinking it) so that it has the " "given size." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:262 +#: ../tools/virt-resize.pl:286 msgid "" "C can be expressed as an absolute number followed by b/K/M/G/T/P/E to " "mean bytes, Kilobytes, Megabytes, Gigabytes, Terabytes, Petabytes or " @@ -25466,7 +25547,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:267 +#: ../tools/virt-resize.pl:291 #, no-wrap msgid "" " --resize /dev/sda2=10G\n" @@ -25474,7 +25555,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:269 +#: ../tools/virt-resize.pl:293 #, no-wrap msgid "" " --resize /dev/sda4=90%\n" @@ -25482,7 +25563,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:271 +#: ../tools/virt-resize.pl:295 #, no-wrap msgid "" " --resize /dev/sda2=+1G\n" @@ -25490,7 +25571,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:273 +#: ../tools/virt-resize.pl:297 #, no-wrap msgid "" " --resize /dev/sda2=-200M\n" @@ -25498,7 +25579,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:275 +#: ../tools/virt-resize.pl:299 #, no-wrap msgid "" " --resize /dev/sda1=+128K\n" @@ -25506,7 +25587,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:277 +#: ../tools/virt-resize.pl:301 #, no-wrap msgid "" " --resize /dev/sda1=+10%\n" @@ -25514,7 +25595,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:279 +#: ../tools/virt-resize.pl:303 #, no-wrap msgid "" " --resize /dev/sda1=-10%\n" @@ -25522,14 +25603,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:281 +#: ../tools/virt-resize.pl:305 msgid "" "You can increase the size of any partition. Virt-resize will expand the " "direct content of the partition if it knows how (see C<--expand> below)." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:285 +#: ../tools/virt-resize.pl:309 msgid "" "You can only I the size of partitions that contain filesystems or " "PVs which have already been shrunk. Virt-resize will check this has been " @@ -25538,18 +25619,18 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:290 ../tools/virt-resize.pl:382 -#: ../tools/virt-resize.pl:399 +#: ../tools/virt-resize.pl:314 ../tools/virt-resize.pl:406 +#: ../tools/virt-resize.pl:423 msgid "You can give this option multiple times." msgstr "" # type: =item -#: ../tools/virt-resize.pl:296 +#: ../tools/virt-resize.pl:320 msgid "B<--resize-force part=size>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:298 +#: ../tools/virt-resize.pl:322 msgid "" "This is the same as C<--resize> except that it will let you decrease the " "size of any partition. Generally this means you will lose any data which " @@ -25559,24 +25640,24 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:304 +#: ../tools/virt-resize.pl:328 msgid "See also the C<--ignore> option." msgstr "" # type: =item -#: ../tools/virt-resize.pl:310 +#: ../tools/virt-resize.pl:334 msgid "B<--expand part>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:312 +#: ../tools/virt-resize.pl:336 msgid "" "Expand the named partition so it uses up all extra space (space left over " "after any other resize changes that you request have been done)." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:315 +#: ../tools/virt-resize.pl:339 msgid "" "If virt-resize knows how, it will expand the direct content of the " "partition. For example, if the partition is an LVM PV, it will expand the " @@ -25585,26 +25666,26 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:320 +#: ../tools/virt-resize.pl:344 msgid "Currently virt-resize can resize:" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:326 +#: ../tools/virt-resize.pl:350 msgid "" "ext2, ext3 and ext4 filesystems when they are contained directly inside a " "partition." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:331 +#: ../tools/virt-resize.pl:355 msgid "" "NTFS filesystems contained directly in a partition, if libguestfs was " "compiled with support for NTFS." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:334 +#: ../tools/virt-resize.pl:358 msgid "" "The filesystem must have been shut down consistently last time it was used. " "Additionally, L marks the resized filesystem as requiring a " @@ -25613,24 +25694,24 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:341 +#: ../tools/virt-resize.pl:365 msgid "" "LVM PVs (physical volumes). However virt-resize does I resize anything " "inside the PV. The user will have to resize LVs as desired." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:347 ../tools/virt-resize.pl:369 +#: ../tools/virt-resize.pl:371 ../tools/virt-resize.pl:393 msgid "Note that you cannot use C<--expand> and C<--shrink> together." msgstr "" # type: =item -#: ../tools/virt-resize.pl:353 +#: ../tools/virt-resize.pl:377 msgid "B<--shrink part>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:355 +#: ../tools/virt-resize.pl:379 msgid "" "Shrink the named partition until the overall disk image fits in the " "destination. The named partition B contain a filesystem or PV which " @@ -25640,7 +25721,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:361 +#: ../tools/virt-resize.pl:385 msgid "" "The amount by which the overall disk must be shrunk (after carrying out all " "other operations requested by the user) is called the \"deficit\". For " @@ -25651,12 +25732,12 @@ msgid "" msgstr "" # type: =item -#: ../tools/virt-resize.pl:375 +#: ../tools/virt-resize.pl:399 msgid "B<--ignore part>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:377 +#: ../tools/virt-resize.pl:401 msgid "" "Ignore the named partition. Effectively this means the partition is " "allocated on the destination disk, but the content is not copied across from " @@ -25665,12 +25746,12 @@ msgid "" msgstr "" # type: =item -#: ../tools/virt-resize.pl:388 +#: ../tools/virt-resize.pl:412 msgid "B<--delete part>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:390 +#: ../tools/virt-resize.pl:414 msgid "" "Delete the named partition. It would be more accurate to describe this as " "\"don't copy it over\", since virt-resize doesn't do in-place changes and " @@ -25678,7 +25759,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:394 +#: ../tools/virt-resize.pl:418 msgid "" "Note that when you delete a partition, then anything contained in the " "partition is also deleted. Furthermore, this causes any partitions that " @@ -25686,12 +25767,12 @@ msgid "" msgstr "" # type: =item -#: ../tools/virt-resize.pl:405 +#: ../tools/virt-resize.pl:429 msgid "B<--LV-expand logvol>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:407 +#: ../tools/virt-resize.pl:431 msgid "" "This takes the logical volume and, as a final step, expands it to fill all " "the space available in its volume group. A typical usage, assuming a Linux " @@ -25700,7 +25781,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:412 +#: ../tools/virt-resize.pl:436 #, no-wrap msgid "" " virt-resize indisk outdisk \\\n" @@ -25709,14 +25790,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:415 +#: ../tools/virt-resize.pl:439 msgid "" "This would first expand the partition (and PV), and then expand the root " "device to fill the extra space in the PV." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:418 +#: ../tools/virt-resize.pl:442 msgid "" "The contents of the LV are also resized if virt-resize knows how to do " "that. You can stop virt-resize from trying to expand the content by using " @@ -25724,12 +25805,12 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:422 +#: ../tools/virt-resize.pl:446 msgid "Use L to list the filesystems in the guest." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:425 +#: ../tools/virt-resize.pl:449 msgid "" "You can give this option multiple times, I it doesn't make sense to do " "this unless the logical volumes you specify are all in different volume " @@ -25737,12 +25818,12 @@ msgid "" msgstr "" # type: =item -#: ../tools/virt-resize.pl:433 +#: ../tools/virt-resize.pl:457 msgid "B<--no-copy-boot-loader>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:435 +#: ../tools/virt-resize.pl:459 msgid "" "By default, virt-resize copies over some sectors at the start of the disk " "(up to the beginning of the first partition). Commonly these sectors " @@ -25751,19 +25832,19 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:440 +#: ../tools/virt-resize.pl:464 msgid "" "If you specify this flag, then this initial copy is not done. You may need " "to reinstall the boot loader in this case." msgstr "" # type: =item -#: ../tools/virt-resize.pl:448 +#: ../tools/virt-resize.pl:472 msgid "B<--no-extra-partition>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:450 +#: ../tools/virt-resize.pl:474 msgid "" "By default, virt-resize creates an extra partition if there is any extra, " "unused space after all resizing has happened. Use this option to prevent " @@ -25773,68 +25854,68 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:456 +#: ../tools/virt-resize.pl:480 msgid "" "Note that if the surplus space is smaller than 10 MB, no extra partition " "will be created." msgstr "" # type: =item -#: ../tools/virt-resize.pl:463 +#: ../tools/virt-resize.pl:487 msgid "B<--no-expand-content>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:465 +#: ../tools/virt-resize.pl:489 msgid "" "By default, virt-resize will try to expand the direct contents of " "partitions, if it knows how (see C<--expand> option above)." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:468 +#: ../tools/virt-resize.pl:492 msgid "" "If you give the C<--no-expand-content> option then virt-resize will not " "attempt this." msgstr "" # type: =item -#: ../tools/virt-resize.pl:475 +#: ../tools/virt-resize.pl:499 msgid "B<-d> | B<--debug>" msgstr "" # type: =item -#: ../tools/virt-resize.pl:483 +#: ../tools/virt-resize.pl:507 msgid "B<-n> | B<--dryrun>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:485 +#: ../tools/virt-resize.pl:509 msgid "Print a summary of what would be done, but don't do anything." msgstr "" # type: =item -#: ../tools/virt-resize.pl:491 +#: ../tools/virt-resize.pl:515 msgid "B<-q> | B<--quiet>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:493 +#: ../tools/virt-resize.pl:517 msgid "Don't print the summary." msgstr "" # type: =head1 -#: ../tools/virt-resize.pl:1359 ../tools/virt-rescue.pl:90 +#: ../tools/virt-resize.pl:1383 ../tools/virt-rescue.pl:90 msgid "NOTES" msgstr "" # type: =head2 -#: ../tools/virt-resize.pl:1361 +#: ../tools/virt-resize.pl:1385 msgid "\"Partition 1 does not end on cylinder boundary.\"" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1363 +#: ../tools/virt-resize.pl:1387 msgid "" "Virt-resize aligns partitions to multiples of 64 sectors. Usually this " "means the partitions will not be aligned to the ancient CHS geometry. " @@ -25844,12 +25925,12 @@ msgid "" msgstr "" # type: =head2 -#: ../tools/virt-resize.pl:1370 +#: ../tools/virt-resize.pl:1394 msgid "RESIZING WINDOWS VIRTUAL MACHINES" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1372 +#: ../tools/virt-resize.pl:1396 msgid "" "In Windows Vista and later versions, Microsoft switched to using a separate " "boot partition. In these VMs, typically C is the boot partition " @@ -25859,27 +25940,61 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1379 +#: ../tools/virt-resize.pl:1403 msgid "" "Windows may initiate a lengthy \"chkdsk\" on first boot after a resize, if " "NTFS partitions have been expanded. This is just a safety check and (unless " "it find errors) is nothing to worry about." msgstr "" +# type: =head2 +#: ../tools/virt-resize.pl:1407 +msgid "GUEST BOOT STUCK AT \"GRUB\"" +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:1409 +msgid "" +"If a Linux guest does not boot after resizing, and the boot is stuck after " +"printing C on the console, try reinstalling grub. This sometimes " +"happens on older (RHEL 5-era) guests, for reasons we don't fully understand, " +"although we think is to do with partition alignment." +msgstr "" + +# type: verbatim +#: ../tools/virt-resize.pl:1414 +#, no-wrap +msgid "" +" guestfish -i -a newdisk\n" +" > cat /boot/grub/device.map\n" +" # check the contents of this file are sensible or\n" +" # edit the file if necessary\n" +" > grub-install / /dev/vda\n" +" > exit\n" +"\n" +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:1421 +msgid "" +"For more flexible guest reconfiguration, including if you need to specify " +"other parameters to grub-install, use L." +msgstr "" + # type: =head1 -#: ../tools/virt-resize.pl:1383 +#: ../tools/virt-resize.pl:1424 msgid "ALTERNATIVE TOOLS" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1385 +#: ../tools/virt-resize.pl:1426 msgid "" "There are several proprietary tools for resizing partitions. We won't " "mention any here." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1388 +#: ../tools/virt-resize.pl:1429 msgid "" "L and its graphical shell gparted can do some types of resizing " "operations on disk images. They can resize and move partitions, but I don't " @@ -25888,7 +26003,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1393 +#: ../tools/virt-resize.pl:1434 msgid "" "L can do everything that virt-resize can do and a lot more, " "but at a much lower level. You will probably end up hand-calculating sector " @@ -25898,12 +26013,13 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1401 +#: ../tools/virt-resize.pl:1449 msgid "" "L, L, L, " "L, L, L, L, L, " -"L, L, L, L, L, L." +"L, L, L, L, L, L, L, L, L, " +"L, L." msgstr "" # type: textblock @@ -25963,7 +26079,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-list-filesystems.pl:193 +#: ../tools/virt-list-filesystems.pl:200 msgid "" "L, L, L, L, L, L, L, L, L, L, L, L, L, L." @@ -26274,7 +26390,7 @@ msgid "Specify that the input or output tarball is gzip-compressed." msgstr "" # type: textblock -#: ../tools/virt-tar.pl:259 +#: ../tools/virt-tar.pl:266 msgid "" "L, L, L, L, L, L, L, L, L, L, L, L, L, L." @@ -26881,7 +26997,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-make-fs.pl:529 +#: ../tools/virt-make-fs.pl:536 msgid "" "L, L, L, L, " "L, L, L, L, L" @@ -26971,7 +27087,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-list-partitions.pl:231 +#: ../tools/virt-list-partitions.pl:238 msgid "" "L, L, L, L, L, L, L, L\n" "Language-Team: LANGUAGE \n" @@ -719,7 +719,7 @@ msgid "There are many limitations to this:" msgstr "" # type: =item -#: ../src/guestfs.pod:345 ../src/guestfs.pod:350 ../src/guestfs.pod:355 ../src/guestfs.pod:359 ../src/guestfs.pod:364 ../src/guestfs.pod:368 ../src/guestfs.pod:373 ../src/guestfs.pod:1254 ../src/guestfs.pod:1259 ../src/guestfs.pod:1263 ../src/guestfs.pod:1365 ../src/guestfs.pod:1369 ../src/guestfs.pod:1373 ../src/guestfs.pod:1378 ../src/guestfs.pod:1386 ../src/guestfs.pod:1405 ../src/guestfs.pod:1413 ../src/guestfs.pod:1643 ../src/guestfs.pod:1649 ../src/guestfs.pod:1654 ../src/guestfs.pod:1660 ../src/guestfs.pod:1767 ../src/guestfs.pod:1771 ../src/guestfs.pod:1775 ../src/guestfs.pod:1779 ../src/guestfs-actions.pod:14 ../src/guestfs-actions.pod:21 ../src/guestfs-actions.pod:372 ../src/guestfs-actions.pod:380 ../src/guestfs-actions.pod:387 ../src/guestfs-actions.pod:394 ../src/guestfs-actions.pod:1285 ../src/guestfs-actions.pod:1289 ../src/guestfs-actions.pod:1293 ../src/guestfs-actions.pod:1297 ../src/guestfs-actions.pod:1305 ../src/guestfs-actions.pod:1309 ../src/guestfs-actions.pod:1313 ../src/guestfs-actions.pod:1323 ../src/guestfs-actions.pod:1327 ../src/guestfs-actions.pod:1331 ../src/guestfs-actions.pod:1454 ../src/guestfs-actions.pod:1458 ../src/guestfs-actions.pod:1463 ../src/guestfs-actions.pod:1468 ../src/guestfs-actions.pod:1520 ../src/guestfs-actions.pod:1524 ../src/guestfs-actions.pod:1529 ../fish/guestfish.pod:338 ../fish/guestfish.pod:342 ../fish/guestfish.pod:346 ../fish/guestfish.pod:350 ../fish/guestfish-actions.pod:15 ../fish/guestfish-actions.pod:22 ../fish/guestfish-actions.pod:306 ../fish/guestfish-actions.pod:314 ../fish/guestfish-actions.pod:321 ../fish/guestfish-actions.pod:328 ../fish/guestfish-actions.pod:1023 ../fish/guestfish-actions.pod:1027 ../fish/guestfish-actions.pod:1031 ../fish/guestfish-actions.pod:1035 ../fish/guestfish-actions.pod:1043 ../fish/guestfish-actions.pod:1047 ../fish/guestfish-actions.pod:1051 ../fish/guestfish-actions.pod:1061 ../fish/guestfish-actions.pod:1065 ../fish/guestfish-actions.pod:1069 ../fish/guestfish-actions.pod:1159 ../fish/guestfish-actions.pod:1163 ../fish/guestfish-actions.pod:1168 ../fish/guestfish-actions.pod:1173 ../fish/guestfish-actions.pod:1215 ../fish/guestfish-actions.pod:1219 ../fish/guestfish-actions.pod:1224 ../tools/virt-df.pl:144 ../tools/virt-df.pl:150 ../tools/virt-resize.pl:324 ../tools/virt-resize.pl:329 ../tools/virt-resize.pl:339 +#: ../src/guestfs.pod:345 ../src/guestfs.pod:350 ../src/guestfs.pod:355 ../src/guestfs.pod:359 ../src/guestfs.pod:364 ../src/guestfs.pod:368 ../src/guestfs.pod:373 ../src/guestfs.pod:1254 ../src/guestfs.pod:1259 ../src/guestfs.pod:1263 ../src/guestfs.pod:1365 ../src/guestfs.pod:1369 ../src/guestfs.pod:1373 ../src/guestfs.pod:1378 ../src/guestfs.pod:1386 ../src/guestfs.pod:1405 ../src/guestfs.pod:1413 ../src/guestfs.pod:1643 ../src/guestfs.pod:1649 ../src/guestfs.pod:1654 ../src/guestfs.pod:1660 ../src/guestfs.pod:1767 ../src/guestfs.pod:1771 ../src/guestfs.pod:1775 ../src/guestfs.pod:1779 ../src/guestfs-actions.pod:14 ../src/guestfs-actions.pod:21 ../src/guestfs-actions.pod:372 ../src/guestfs-actions.pod:380 ../src/guestfs-actions.pod:387 ../src/guestfs-actions.pod:394 ../src/guestfs-actions.pod:1285 ../src/guestfs-actions.pod:1289 ../src/guestfs-actions.pod:1293 ../src/guestfs-actions.pod:1297 ../src/guestfs-actions.pod:1305 ../src/guestfs-actions.pod:1309 ../src/guestfs-actions.pod:1313 ../src/guestfs-actions.pod:1323 ../src/guestfs-actions.pod:1327 ../src/guestfs-actions.pod:1331 ../src/guestfs-actions.pod:1454 ../src/guestfs-actions.pod:1458 ../src/guestfs-actions.pod:1463 ../src/guestfs-actions.pod:1468 ../src/guestfs-actions.pod:1520 ../src/guestfs-actions.pod:1524 ../src/guestfs-actions.pod:1529 ../fish/guestfish.pod:338 ../fish/guestfish.pod:342 ../fish/guestfish.pod:346 ../fish/guestfish.pod:350 ../fish/guestfish-actions.pod:15 ../fish/guestfish-actions.pod:22 ../fish/guestfish-actions.pod:306 ../fish/guestfish-actions.pod:314 ../fish/guestfish-actions.pod:321 ../fish/guestfish-actions.pod:328 ../fish/guestfish-actions.pod:1023 ../fish/guestfish-actions.pod:1027 ../fish/guestfish-actions.pod:1031 ../fish/guestfish-actions.pod:1035 ../fish/guestfish-actions.pod:1043 ../fish/guestfish-actions.pod:1047 ../fish/guestfish-actions.pod:1051 ../fish/guestfish-actions.pod:1061 ../fish/guestfish-actions.pod:1065 ../fish/guestfish-actions.pod:1069 ../fish/guestfish-actions.pod:1159 ../fish/guestfish-actions.pod:1163 ../fish/guestfish-actions.pod:1168 ../fish/guestfish-actions.pod:1173 ../fish/guestfish-actions.pod:1215 ../fish/guestfish-actions.pod:1219 ../fish/guestfish-actions.pod:1224 ../tools/virt-df.pl:144 ../tools/virt-df.pl:150 ../tools/virt-resize.pl:348 ../tools/virt-resize.pl:353 ../tools/virt-resize.pl:363 msgid "*" msgstr "" @@ -3368,7 +3368,7 @@ msgid "" msgstr "" # type: =head1 -#: ../src/guestfs.pod:1726 ../fish/guestfish.pod:950 ../test-tool/libguestfs-test-tool.pod:109 ../fuse/guestmount.pod:178 ../inspector/virt-inspector.pl:846 ../tools/virt-edit.pl:325 ../tools/virt-win-reg.pl:461 ../tools/virt-df.pl:536 ../tools/virt-ls.pl:210 ../tools/virt-resize.pl:1399 ../tools/virt-list-filesystems.pl:191 ../tools/virt-cat.pl:163 ../tools/virt-tar.pl:257 ../tools/virt-rescue.pl:231 ../tools/virt-make-fs.pl:527 ../tools/virt-list-partitions.pl:229 +#: ../src/guestfs.pod:1726 ../fish/guestfish.pod:950 ../test-tool/libguestfs-test-tool.pod:109 ../fuse/guestmount.pod:178 ../inspector/virt-inspector.pl:853 ../tools/virt-edit.pl:332 ../tools/virt-win-reg.pl:468 ../tools/virt-df.pl:573 ../tools/virt-ls.pl:217 ../tools/virt-resize.pl:1447 ../tools/virt-list-filesystems.pl:198 ../tools/virt-cat.pl:170 ../tools/virt-tar.pl:264 ../tools/virt-rescue.pl:238 ../tools/virt-make-fs.pl:534 ../tools/virt-list-partitions.pl:236 msgid "SEE ALSO" msgstr "" @@ -3390,7 +3390,7 @@ msgid "" msgstr "" # type: =head1 -#: ../src/guestfs.pod:1753 ../tools/virt-win-reg.pl:476 ../tools/virt-make-fs.pl:541 +#: ../src/guestfs.pod:1753 ../tools/virt-win-reg.pl:483 ../tools/virt-make-fs.pl:548 msgid "BUGS" msgstr "" @@ -3442,7 +3442,7 @@ msgid "" msgstr "" # type: =head1 -#: ../src/guestfs.pod:1786 ../fish/guestfish.pod:967 ../test-tool/libguestfs-test-tool.pod:115 ../fuse/guestmount.pod:189 ../inspector/virt-inspector.pl:855 +#: ../src/guestfs.pod:1786 ../fish/guestfish.pod:967 ../test-tool/libguestfs-test-tool.pod:115 ../fuse/guestmount.pod:189 ../inspector/virt-inspector.pl:862 msgid "AUTHORS" msgstr "" @@ -3452,7 +3452,7 @@ msgid "Richard W.M. Jones (C)" msgstr "" # type: =head1 -#: ../src/guestfs.pod:1790 ../fish/guestfish.pod:971 ../test-tool/libguestfs-test-tool.pod:119 ../fuse/guestmount.pod:193 ../inspector/virt-inspector.pl:861 ../tools/virt-edit.pl:341 ../tools/virt-win-reg.pl:491 ../tools/virt-df.pl:549 ../tools/virt-ls.pl:225 ../tools/virt-resize.pl:1420 ../tools/virt-list-filesystems.pl:207 ../tools/virt-cat.pl:177 ../tools/virt-tar.pl:272 ../tools/virt-rescue.pl:245 ../tools/virt-make-fs.pl:556 ../tools/virt-list-partitions.pl:244 +#: ../src/guestfs.pod:1790 ../fish/guestfish.pod:971 ../test-tool/libguestfs-test-tool.pod:119 ../fuse/guestmount.pod:193 ../inspector/virt-inspector.pl:868 ../tools/virt-edit.pl:348 ../tools/virt-win-reg.pl:498 ../tools/virt-df.pl:586 ../tools/virt-ls.pl:232 ../tools/virt-resize.pl:1473 ../tools/virt-list-filesystems.pl:214 ../tools/virt-cat.pl:184 ../tools/virt-tar.pl:279 ../tools/virt-rescue.pl:252 ../tools/virt-make-fs.pl:563 ../tools/virt-list-partitions.pl:251 msgid "COPYRIGHT" msgstr "" @@ -14685,12 +14685,12 @@ msgid "" msgstr "" # type: =head1 -#: ../fish/guestfish.pod:148 ../test-tool/libguestfs-test-tool.pod:37 ../fuse/guestmount.pod:70 ../inspector/virt-inspector.pl:75 ../tools/virt-edit.pl:73 ../tools/virt-win-reg.pl:172 ../tools/virt-df.pl:71 ../tools/virt-ls.pl:79 ../tools/virt-resize.pl:233 ../tools/virt-list-filesystems.pl:50 ../tools/virt-cat.pl:80 ../tools/virt-tar.pl:99 ../tools/virt-rescue.pl:103 ../tools/virt-make-fs.pl:153 ../tools/virt-list-partitions.pl:51 +#: ../fish/guestfish.pod:148 ../test-tool/libguestfs-test-tool.pod:37 ../fuse/guestmount.pod:70 ../inspector/virt-inspector.pl:75 ../tools/virt-edit.pl:73 ../tools/virt-win-reg.pl:172 ../tools/virt-df.pl:71 ../tools/virt-ls.pl:79 ../tools/virt-resize.pl:257 ../tools/virt-list-filesystems.pl:50 ../tools/virt-cat.pl:80 ../tools/virt-tar.pl:99 ../tools/virt-rescue.pl:103 ../tools/virt-make-fs.pl:153 ../tools/virt-list-partitions.pl:51 msgid "OPTIONS" msgstr "" # type: =item -#: ../fish/guestfish.pod:152 ../fuse/guestmount.pod:94 ../inspector/virt-inspector.pl:83 ../tools/virt-edit.pl:81 ../tools/virt-win-reg.pl:180 ../tools/virt-df.pl:79 ../tools/virt-ls.pl:87 ../tools/virt-resize.pl:241 ../tools/virt-list-filesystems.pl:58 ../tools/virt-cat.pl:88 ../tools/virt-tar.pl:107 ../tools/virt-rescue.pl:111 ../tools/virt-make-fs.pl:161 ../tools/virt-list-partitions.pl:59 +#: ../fish/guestfish.pod:152 ../fuse/guestmount.pod:94 ../inspector/virt-inspector.pl:83 ../tools/virt-edit.pl:81 ../tools/virt-win-reg.pl:180 ../tools/virt-df.pl:79 ../tools/virt-ls.pl:87 ../tools/virt-resize.pl:265 ../tools/virt-list-filesystems.pl:58 ../tools/virt-cat.pl:88 ../tools/virt-tar.pl:107 ../tools/virt-rescue.pl:111 ../tools/virt-make-fs.pl:161 ../tools/virt-list-partitions.pl:59 msgid "B<--help>" msgstr "" @@ -16427,7 +16427,7 @@ msgid "" msgstr "" # type: textblock -#: ../fish/guestfish.pod:976 ../test-tool/libguestfs-test-tool.pod:124 ../fuse/guestmount.pod:198 ../inspector/virt-inspector.pl:865 ../tools/virt-edit.pl:345 ../tools/virt-win-reg.pl:495 ../tools/virt-df.pl:553 ../tools/virt-ls.pl:229 ../tools/virt-resize.pl:1424 ../tools/virt-list-filesystems.pl:211 ../tools/virt-cat.pl:181 ../tools/virt-tar.pl:276 ../tools/virt-rescue.pl:249 ../tools/virt-make-fs.pl:560 ../tools/virt-list-partitions.pl:248 +#: ../fish/guestfish.pod:976 ../test-tool/libguestfs-test-tool.pod:124 ../fuse/guestmount.pod:198 ../inspector/virt-inspector.pl:872 ../tools/virt-edit.pl:352 ../tools/virt-win-reg.pl:502 ../tools/virt-df.pl:590 ../tools/virt-ls.pl:236 ../tools/virt-resize.pl:1477 ../tools/virt-list-filesystems.pl:218 ../tools/virt-cat.pl:188 ../tools/virt-tar.pl:283 ../tools/virt-rescue.pl:256 ../tools/virt-make-fs.pl:567 ../tools/virt-list-partitions.pl:255 msgid "" "This program is free software; you can redistribute it and/or modify it " "under the terms of the GNU General Public License as published by the Free " @@ -16436,7 +16436,7 @@ msgid "" msgstr "" # type: textblock -#: ../fish/guestfish.pod:981 ../test-tool/libguestfs-test-tool.pod:129 ../fuse/guestmount.pod:203 ../inspector/virt-inspector.pl:870 ../tools/virt-edit.pl:350 ../tools/virt-win-reg.pl:500 ../tools/virt-df.pl:558 ../tools/virt-ls.pl:234 ../tools/virt-resize.pl:1429 ../tools/virt-list-filesystems.pl:216 ../tools/virt-cat.pl:186 ../tools/virt-tar.pl:281 ../tools/virt-rescue.pl:254 ../tools/virt-make-fs.pl:565 ../tools/virt-list-partitions.pl:253 +#: ../fish/guestfish.pod:981 ../test-tool/libguestfs-test-tool.pod:129 ../fuse/guestmount.pod:203 ../inspector/virt-inspector.pl:877 ../tools/virt-edit.pl:357 ../tools/virt-win-reg.pl:507 ../tools/virt-df.pl:595 ../tools/virt-ls.pl:241 ../tools/virt-resize.pl:1482 ../tools/virt-list-filesystems.pl:223 ../tools/virt-cat.pl:193 ../tools/virt-tar.pl:288 ../tools/virt-rescue.pl:261 ../tools/virt-make-fs.pl:572 ../tools/virt-list-partitions.pl:260 msgid "" "This program is distributed in the hope that it will be useful, but WITHOUT " "ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or " @@ -16445,7 +16445,7 @@ msgid "" msgstr "" # type: textblock -#: ../fish/guestfish.pod:986 ../test-tool/libguestfs-test-tool.pod:134 ../fuse/guestmount.pod:208 ../inspector/virt-inspector.pl:875 ../tools/virt-edit.pl:355 ../tools/virt-win-reg.pl:505 ../tools/virt-df.pl:563 ../tools/virt-ls.pl:239 ../tools/virt-resize.pl:1434 ../tools/virt-list-filesystems.pl:221 ../tools/virt-cat.pl:191 ../tools/virt-tar.pl:286 ../tools/virt-rescue.pl:259 ../tools/virt-make-fs.pl:570 ../tools/virt-list-partitions.pl:258 +#: ../fish/guestfish.pod:986 ../test-tool/libguestfs-test-tool.pod:134 ../fuse/guestmount.pod:208 ../inspector/virt-inspector.pl:882 ../tools/virt-edit.pl:362 ../tools/virt-win-reg.pl:512 ../tools/virt-df.pl:600 ../tools/virt-ls.pl:246 ../tools/virt-resize.pl:1487 ../tools/virt-list-filesystems.pl:228 ../tools/virt-cat.pl:198 ../tools/virt-tar.pl:293 ../tools/virt-rescue.pl:266 ../tools/virt-make-fs.pl:577 ../tools/virt-list-partitions.pl:265 msgid "" "You should have received a copy of the GNU General Public License along with " "this program; if not, write to the Free Software Foundation, Inc., 675 Mass " @@ -23084,12 +23084,12 @@ msgid "Display brief help." msgstr "" # type: =item -#: ../inspector/virt-inspector.pl:91 ../tools/virt-edit.pl:89 ../tools/virt-win-reg.pl:188 ../tools/virt-df.pl:87 ../tools/virt-ls.pl:95 ../tools/virt-resize.pl:249 ../tools/virt-list-filesystems.pl:66 ../tools/virt-cat.pl:96 ../tools/virt-tar.pl:115 ../tools/virt-rescue.pl:119 ../tools/virt-make-fs.pl:169 ../tools/virt-list-partitions.pl:67 +#: ../inspector/virt-inspector.pl:91 ../tools/virt-edit.pl:89 ../tools/virt-win-reg.pl:188 ../tools/virt-df.pl:87 ../tools/virt-ls.pl:95 ../tools/virt-resize.pl:273 ../tools/virt-list-filesystems.pl:66 ../tools/virt-cat.pl:96 ../tools/virt-tar.pl:115 ../tools/virt-rescue.pl:119 ../tools/virt-make-fs.pl:169 ../tools/virt-list-partitions.pl:67 msgid "B<--version>" msgstr "" # type: textblock -#: ../inspector/virt-inspector.pl:93 ../tools/virt-edit.pl:91 ../tools/virt-win-reg.pl:190 ../tools/virt-df.pl:89 ../tools/virt-ls.pl:97 ../tools/virt-resize.pl:251 ../tools/virt-list-filesystems.pl:68 ../tools/virt-cat.pl:98 ../tools/virt-tar.pl:117 ../tools/virt-rescue.pl:121 ../tools/virt-make-fs.pl:171 ../tools/virt-list-partitions.pl:69 +#: ../inspector/virt-inspector.pl:93 ../tools/virt-edit.pl:91 ../tools/virt-win-reg.pl:190 ../tools/virt-df.pl:89 ../tools/virt-ls.pl:97 ../tools/virt-resize.pl:275 ../tools/virt-list-filesystems.pl:68 ../tools/virt-cat.pl:98 ../tools/virt-tar.pl:117 ../tools/virt-rescue.pl:121 ../tools/virt-make-fs.pl:171 ../tools/virt-list-partitions.pl:69 msgid "Display version number and exit." msgstr "" @@ -23485,25 +23485,39 @@ msgstr "" msgid "Print the architecture of the kernel." msgstr "" +# type: =head1 +#: ../inspector/virt-inspector.pl:846 ../tools/virt-edit.pl:325 ../tools/virt-win-reg.pl:142 ../tools/virt-win-reg.pl:461 ../tools/virt-df.pl:566 ../tools/virt-ls.pl:210 ../tools/virt-resize.pl:1440 ../tools/virt-list-filesystems.pl:191 ../tools/virt-cat.pl:163 ../tools/virt-tar.pl:257 ../tools/virt-rescue.pl:231 ../tools/virt-make-fs.pl:527 ../tools/virt-list-partitions.pl:229 +msgid "SHELL QUOTING" +msgstr "" + +# type: textblock +#: ../inspector/virt-inspector.pl:848 ../tools/virt-edit.pl:327 ../tools/virt-win-reg.pl:463 ../tools/virt-df.pl:568 ../tools/virt-ls.pl:212 ../tools/virt-resize.pl:1442 ../tools/virt-list-filesystems.pl:193 ../tools/virt-cat.pl:165 ../tools/virt-tar.pl:259 ../tools/virt-rescue.pl:233 ../tools/virt-make-fs.pl:529 ../tools/virt-list-partitions.pl:231 +msgid "" +"Libvirt guest names can contain arbitrary characters, some of which have " +"meaning to the shell such as C<#> and space. You may need to quote or " +"escape these characters on the command line. See the shell manual page " +"L for details." +msgstr "" + # type: textblock -#: ../inspector/virt-inspector.pl:848 ../tools/virt-df.pl:538 +#: ../inspector/virt-inspector.pl:855 ../tools/virt-df.pl:575 msgid "" "L, L, L, L, " "L, L." msgstr "" # type: textblock -#: ../inspector/virt-inspector.pl:857 ../tools/virt-edit.pl:339 ../tools/virt-win-reg.pl:489 ../tools/virt-df.pl:547 ../tools/virt-ls.pl:223 ../tools/virt-resize.pl:1418 ../tools/virt-list-filesystems.pl:205 ../tools/virt-cat.pl:175 ../tools/virt-tar.pl:270 ../tools/virt-rescue.pl:243 ../tools/virt-make-fs.pl:554 ../tools/virt-list-partitions.pl:242 +#: ../inspector/virt-inspector.pl:864 ../tools/virt-edit.pl:346 ../tools/virt-win-reg.pl:496 ../tools/virt-df.pl:584 ../tools/virt-ls.pl:230 ../tools/virt-resize.pl:1471 ../tools/virt-list-filesystems.pl:212 ../tools/virt-cat.pl:182 ../tools/virt-tar.pl:277 ../tools/virt-rescue.pl:250 ../tools/virt-make-fs.pl:561 ../tools/virt-list-partitions.pl:249 msgid "Richard W.M. Jones L" msgstr "" # type: textblock -#: ../inspector/virt-inspector.pl:859 +#: ../inspector/virt-inspector.pl:866 msgid "Matthew Booth L" msgstr "" # type: textblock -#: ../inspector/virt-inspector.pl:863 ../tools/virt-ls.pl:227 ../tools/virt-list-filesystems.pl:209 ../tools/virt-cat.pl:179 ../tools/virt-tar.pl:274 +#: ../inspector/virt-inspector.pl:870 ../tools/virt-ls.pl:234 ../tools/virt-list-filesystems.pl:216 ../tools/virt-cat.pl:186 ../tools/virt-tar.pl:281 msgid "Copyright (C) 2009 Red Hat Inc." msgstr "" @@ -23811,7 +23825,7 @@ msgid "If not set, C is used." msgstr "" # type: textblock -#: ../tools/virt-edit.pl:327 +#: ../tools/virt-edit.pl:334 msgid "" "L, L, L, L, " "L, L, L, " @@ -23819,12 +23833,12 @@ msgid "" msgstr "" # type: =head1 -#: ../tools/virt-edit.pl:337 ../tools/virt-win-reg.pl:487 ../tools/virt-df.pl:545 ../tools/virt-ls.pl:221 ../tools/virt-resize.pl:1416 ../tools/virt-list-filesystems.pl:203 ../tools/virt-cat.pl:173 ../tools/virt-tar.pl:268 ../tools/virt-rescue.pl:241 ../tools/virt-make-fs.pl:552 ../tools/virt-list-partitions.pl:240 +#: ../tools/virt-edit.pl:344 ../tools/virt-win-reg.pl:494 ../tools/virt-df.pl:582 ../tools/virt-ls.pl:228 ../tools/virt-resize.pl:1469 ../tools/virt-list-filesystems.pl:210 ../tools/virt-cat.pl:180 ../tools/virt-tar.pl:275 ../tools/virt-rescue.pl:248 ../tools/virt-make-fs.pl:559 ../tools/virt-list-partitions.pl:247 msgid "AUTHOR" msgstr "" # type: textblock -#: ../tools/virt-edit.pl:343 ../tools/virt-df.pl:551 ../tools/virt-rescue.pl:247 ../tools/virt-list-partitions.pl:246 +#: ../tools/virt-edit.pl:350 ../tools/virt-df.pl:588 ../tools/virt-rescue.pl:254 ../tools/virt-list-partitions.pl:253 msgid "Copyright (C) 2009-2010 Red Hat Inc." msgstr "" @@ -24074,11 +24088,6 @@ msgstr "" msgid "This file would need conversion before you could C<--merge> it." msgstr "" -# type: =head2 -#: ../tools/virt-win-reg.pl:142 -msgid "SHELL QUOTING" -msgstr "" - # type: textblock #: ../tools/virt-win-reg.pl:144 msgid "" @@ -24142,7 +24151,7 @@ msgid "B<--debug>" msgstr "" # type: textblock -#: ../tools/virt-win-reg.pl:198 ../tools/virt-resize.pl:477 +#: ../tools/virt-win-reg.pl:198 ../tools/virt-resize.pl:501 msgid "Enable debugging messages." msgstr "" @@ -24188,7 +24197,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-win-reg.pl:463 +#: ../tools/virt-win-reg.pl:470 msgid "" "L, L, L, L, " "L, L, L, " @@ -24197,14 +24206,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-win-reg.pl:478 ../tools/virt-make-fs.pl:543 +#: ../tools/virt-win-reg.pl:485 ../tools/virt-make-fs.pl:550 msgid "" "When reporting bugs, please enable debugging and capture the I " "output:" msgstr "" # type: verbatim -#: ../tools/virt-win-reg.pl:481 +#: ../tools/virt-win-reg.pl:488 #, no-wrap msgid "" " export LIBGUESTFS_DEBUG=1\n" @@ -24213,14 +24222,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-win-reg.pl:484 +#: ../tools/virt-win-reg.pl:491 msgid "" "Attach /tmp/virt-win-reg.log to a new bug report at " "L" msgstr "" # type: textblock -#: ../tools/virt-win-reg.pl:493 ../tools/virt-resize.pl:1422 ../tools/virt-make-fs.pl:558 +#: ../tools/virt-win-reg.pl:500 ../tools/virt-resize.pl:1475 ../tools/virt-make-fs.pl:565 msgid "Copyright (C) 2010 Red Hat Inc." msgstr "" @@ -24367,26 +24376,26 @@ msgid "" msgstr "" # type: =head1 -#: ../tools/virt-df.pl:512 +#: ../tools/virt-df.pl:542 msgid "NOTE ABOUT CSV FORMAT" msgstr "" # type: textblock -#: ../tools/virt-df.pl:514 +#: ../tools/virt-df.pl:544 msgid "" "Comma-separated values (CSV) is a deceptive format. It I like it " "should be easy to parse, but it is definitely not easy to parse." msgstr "" # type: textblock -#: ../tools/virt-df.pl:517 +#: ../tools/virt-df.pl:547 msgid "" "Myth: Just split fields at commas. Reality: This does I work " "reliably. This example has two columns:" msgstr "" # type: verbatim -#: ../tools/virt-df.pl:520 +#: ../tools/virt-df.pl:550 #, no-wrap msgid "" " \"foo,bar\",baz\n" @@ -24394,14 +24403,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-df.pl:522 +#: ../tools/virt-df.pl:552 msgid "" "Myth: Read the file one line at a time. Reality: This does I work " "reliably. This example has one row:" msgstr "" # type: verbatim -#: ../tools/virt-df.pl:525 +#: ../tools/virt-df.pl:555 #, no-wrap msgid "" " \"foo\n" @@ -24410,21 +24419,21 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-df.pl:528 +#: ../tools/virt-df.pl:558 msgid "" "For shell scripts, use C (L also " "packaged in major Linux distributions)." msgstr "" # type: textblock -#: ../tools/virt-df.pl:531 +#: ../tools/virt-df.pl:561 msgid "" "For other languages, use a CSV processing library (eg. C for Perl " "or Python's built-in csv library)." msgstr "" # type: textblock -#: ../tools/virt-df.pl:534 +#: ../tools/virt-df.pl:564 msgid "Most spreadsheets and databases can import CSV directly." msgstr "" @@ -24561,7 +24570,7 @@ msgid "You cannot combine these options." msgstr "" # type: textblock -#: ../tools/virt-ls.pl:212 +#: ../tools/virt-ls.pl:219 msgid "" "L, L, L, L, " "L, L, L, " @@ -24640,28 +24649,42 @@ msgid "" "\n" msgstr "" -# type: =head1 +# type: textblock #: ../tools/virt-resize.pl:81 +msgid "As above, but the output format will be uncompressed qcow2:" +msgstr "" + +# type: verbatim +#: ../tools/virt-resize.pl:83 +#, no-wrap +msgid "" +" qemu-img create -f qcow2 newdisk.qcow2 15G\n" +" virt-resize --expand /dev/sda2 olddisk newdisk.qcow2\n" +"\n" +msgstr "" + +# type: =head1 +#: ../tools/virt-resize.pl:86 msgid "DETAILED USAGE" msgstr "" # type: =head2 -#: ../tools/virt-resize.pl:83 +#: ../tools/virt-resize.pl:88 msgid "EXPANDING A VIRTUAL MACHINE DISK" msgstr "" # type: =item -#: ../tools/virt-resize.pl:87 +#: ../tools/virt-resize.pl:92 msgid "1. Shut down the virtual machine" msgstr "" # type: =item -#: ../tools/virt-resize.pl:89 +#: ../tools/virt-resize.pl:94 msgid "2. Locate input disk image" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:91 +#: ../tools/virt-resize.pl:96 msgid "" "Locate the input disk image (ie. the file or device on the host containing " "the guest's disk). If the guest is managed by libvirt, you can use C to display the current partitions and sizes:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:105 +#: ../tools/virt-resize.pl:110 #, no-wrap msgid "" " # virt-list-partitions -lht /dev/vg/lv_guest\n" @@ -24701,31 +24724,31 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:110 +#: ../tools/virt-resize.pl:115 msgid "" "(This example is a virtual machine with an 8 GB disk which we would like to " "expand up to 10 GB)." msgstr "" # type: =item -#: ../tools/virt-resize.pl:113 +#: ../tools/virt-resize.pl:118 msgid "4. Create output disk" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:115 +#: ../tools/virt-resize.pl:120 msgid "" "Virt-resize cannot do in-place disk modifications. You have to have space " "to store the resized output disk." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:118 +#: ../tools/virt-resize.pl:123 msgid "To store the resized disk image in a file, create a file of a suitable size:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:121 +#: ../tools/virt-resize.pl:126 #, no-wrap msgid "" " # rm -f outdisk\n" @@ -24734,12 +24757,12 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:124 +#: ../tools/virt-resize.pl:129 msgid "Or use L to create a logical volume:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:126 +#: ../tools/virt-resize.pl:131 #, no-wrap msgid "" " # lvcreate -L 10G -n lv_name vg_name\n" @@ -24747,12 +24770,12 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:128 +#: ../tools/virt-resize.pl:133 msgid "Or use L vol-create-as to create a libvirt storage volume:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:130 +#: ../tools/virt-resize.pl:135 #, no-wrap msgid "" " # virsh pool-list\n" @@ -24761,12 +24784,12 @@ msgid "" msgstr "" # type: =item -#: ../tools/virt-resize.pl:133 +#: ../tools/virt-resize.pl:138 msgid "5. Resize" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:135 +#: ../tools/virt-resize.pl:140 msgid "" "virt-resize takes two mandatory parameters, the input disk (eg. device or " "file) and the output disk. The output disk is the one created in the " @@ -24774,7 +24797,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:139 +#: ../tools/virt-resize.pl:144 #, no-wrap msgid "" " # virt-resize indisk outdisk\n" @@ -24782,7 +24805,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:141 +#: ../tools/virt-resize.pl:146 msgid "" "This command just copies disk image C to disk image C " "I resizing or changing any existing partitions. If C is " @@ -24792,7 +24815,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:147 +#: ../tools/virt-resize.pl:152 msgid "" "More realistically you'd want to expand existing partitions in the disk " "image by passing extra options (for the full list see the L " @@ -24800,14 +24823,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:151 +#: ../tools/virt-resize.pl:156 msgid "" "L is the most useful option. It expands the named partition " "within the disk to fill any extra space:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:154 +#: ../tools/virt-resize.pl:159 #, no-wrap msgid "" " # virt-resize --expand /dev/sda2 indisk outdisk\n" @@ -24815,14 +24838,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:156 +#: ../tools/virt-resize.pl:161 msgid "" "(In this case, an extra partition is I created at the end of the disk, " "because there will be no unused space)." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:159 +#: ../tools/virt-resize.pl:164 msgid "" "L is the other commonly used option. The following would " "increase the size of /dev/sda1 by 200M, and expand /dev/sda2 to fill the " @@ -24830,7 +24853,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:163 +#: ../tools/virt-resize.pl:168 #, no-wrap msgid "" " # virt-resize --resize /dev/sda1=+200M --expand /dev/sda2 \\\n" @@ -24839,7 +24862,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:166 +#: ../tools/virt-resize.pl:171 msgid "" "If the expanded partition in the image contains a filesystem or LVM PV, then " "if virt-resize knows how, it will resize the contents, the equivalent of " @@ -24852,27 +24875,27 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:175 +#: ../tools/virt-resize.pl:180 msgid "Other options are covered below." msgstr "" # type: =item -#: ../tools/virt-resize.pl:177 +#: ../tools/virt-resize.pl:182 msgid "6. Test" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:179 +#: ../tools/virt-resize.pl:184 msgid "Thoroughly test the new disk image I discarding the old one." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:181 +#: ../tools/virt-resize.pl:186 msgid "If you are using libvirt, edit the XML to point at the new disk:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:183 +#: ../tools/virt-resize.pl:188 #, no-wrap msgid "" " # virsh edit guestname\n" @@ -24880,19 +24903,19 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:185 +#: ../tools/virt-resize.pl:190 msgid "" "Change Esource ...E, see " "L" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:188 +#: ../tools/virt-resize.pl:193 msgid "Then start up the domain with the new, resized disk:" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:190 +#: ../tools/virt-resize.pl:195 #, no-wrap msgid "" " # virsh start guestname\n" @@ -24900,24 +24923,24 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:192 +#: ../tools/virt-resize.pl:197 msgid "" "and check that it still works. See also the L section below for " "additional information." msgstr "" # type: =item -#: ../tools/virt-resize.pl:195 +#: ../tools/virt-resize.pl:200 msgid "7. Resize LVs etc inside the guest" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:197 +#: ../tools/virt-resize.pl:202 msgid "(This can also be done offline using L)" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:199 +#: ../tools/virt-resize.pl:204 msgid "" "Once the guest has booted you should see the new space available, at least " "for filesystems that virt-resize knows how to resize, and for PVs. The user " @@ -24926,19 +24949,19 @@ msgid "" msgstr "" # type: =head2 -#: ../tools/virt-resize.pl:206 +#: ../tools/virt-resize.pl:211 msgid "SHRINKING A VIRTUAL MACHINE DISK" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:208 +#: ../tools/virt-resize.pl:213 msgid "" "Shrinking is somewhat more complex than expanding, and only an overview is " "given here." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:211 +#: ../tools/virt-resize.pl:216 msgid "" "Firstly virt-resize will not attempt to shrink any partition content (PVs, " "filesystems). The user has to shrink content before passing the disk image " @@ -24947,29 +24970,29 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:216 +#: ../tools/virt-resize.pl:221 msgid "(Shrinking can also be done offline using L)" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:218 +#: ../tools/virt-resize.pl:223 msgid "" "After shrinking PVs and filesystems, shut down the guest, and proceed with " "steps 3 and 4 above to allocate a new disk image." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:221 +#: ../tools/virt-resize.pl:226 msgid "Then run virt-resize with any of the C<--shrink> and/or C<--resize> options." msgstr "" # type: =head2 -#: ../tools/virt-resize.pl:224 +#: ../tools/virt-resize.pl:229 msgid "IGNORING OR DELETING PARTITIONS" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:226 +#: ../tools/virt-resize.pl:231 msgid "" "virt-resize also gives a convenient way to ignore or delete partitions when " "copying from the input disk to the output disk. Ignoring a partition speeds " @@ -24979,25 +25002,72 @@ msgid "" "leave some guests unbootable." msgstr "" +# type: =head2 +#: ../tools/virt-resize.pl:238 +msgid "QCOW2 AND NON-SPARSE RAW FORMATS" +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:240 +msgid "" +"If the input disk is in qcow2 format, then you may prefer that the output is " +"in qcow2 format as well. Alternately, virt-resize can convert the format on " +"the fly. The output format is simply determined by the format of the empty " +"output container that you provide. Thus to create qcow2 output, use:" +msgstr "" + +# type: verbatim +#: ../tools/virt-resize.pl:246 +#, no-wrap +msgid "" +" qemu-img create [-c] -f qcow2 outdisk [size]\n" +"\n" +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:248 +msgid "instead of the truncate command (use C<-c> for a compressed disk)." +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:250 +msgid "Similarly, to get non-sparse raw output use:" +msgstr "" + +# type: verbatim +#: ../tools/virt-resize.pl:252 +#, no-wrap +msgid "" +" fallocate -l size outdisk\n" +"\n" +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:254 +msgid "" +"(on older systems that don't have the L command use C
)" +msgstr "" + # type: textblock -#: ../tools/virt-resize.pl:243 +#: ../tools/virt-resize.pl:267 msgid "Display help." msgstr "" # type: =item -#: ../tools/virt-resize.pl:257 +#: ../tools/virt-resize.pl:281 msgid "B<--resize part=size>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:259 +#: ../tools/virt-resize.pl:283 msgid "" "Resize the named partition (expanding or shrinking it) so that it has the " "given size." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:262 +#: ../tools/virt-resize.pl:286 msgid "" "C can be expressed as an absolute number followed by b/K/M/G/T/P/E to " "mean bytes, Kilobytes, Megabytes, Gigabytes, Terabytes, Petabytes or " @@ -25006,7 +25076,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:267 +#: ../tools/virt-resize.pl:291 #, no-wrap msgid "" " --resize /dev/sda2=10G\n" @@ -25014,7 +25084,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:269 +#: ../tools/virt-resize.pl:293 #, no-wrap msgid "" " --resize /dev/sda4=90%\n" @@ -25022,7 +25092,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:271 +#: ../tools/virt-resize.pl:295 #, no-wrap msgid "" " --resize /dev/sda2=+1G\n" @@ -25030,7 +25100,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:273 +#: ../tools/virt-resize.pl:297 #, no-wrap msgid "" " --resize /dev/sda2=-200M\n" @@ -25038,7 +25108,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:275 +#: ../tools/virt-resize.pl:299 #, no-wrap msgid "" " --resize /dev/sda1=+128K\n" @@ -25046,7 +25116,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:277 +#: ../tools/virt-resize.pl:301 #, no-wrap msgid "" " --resize /dev/sda1=+10%\n" @@ -25054,7 +25124,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:279 +#: ../tools/virt-resize.pl:303 #, no-wrap msgid "" " --resize /dev/sda1=-10%\n" @@ -25062,14 +25132,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:281 +#: ../tools/virt-resize.pl:305 msgid "" "You can increase the size of any partition. Virt-resize will expand the " "direct content of the partition if it knows how (see C<--expand> below)." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:285 +#: ../tools/virt-resize.pl:309 msgid "" "You can only I the size of partitions that contain filesystems or " "PVs which have already been shrunk. Virt-resize will check this has been " @@ -25078,17 +25148,17 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:290 ../tools/virt-resize.pl:382 ../tools/virt-resize.pl:399 +#: ../tools/virt-resize.pl:314 ../tools/virt-resize.pl:406 ../tools/virt-resize.pl:423 msgid "You can give this option multiple times." msgstr "" # type: =item -#: ../tools/virt-resize.pl:296 +#: ../tools/virt-resize.pl:320 msgid "B<--resize-force part=size>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:298 +#: ../tools/virt-resize.pl:322 msgid "" "This is the same as C<--resize> except that it will let you decrease the " "size of any partition. Generally this means you will lose any data which " @@ -25098,24 +25168,24 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:304 +#: ../tools/virt-resize.pl:328 msgid "See also the C<--ignore> option." msgstr "" # type: =item -#: ../tools/virt-resize.pl:310 +#: ../tools/virt-resize.pl:334 msgid "B<--expand part>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:312 +#: ../tools/virt-resize.pl:336 msgid "" "Expand the named partition so it uses up all extra space (space left over " "after any other resize changes that you request have been done)." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:315 +#: ../tools/virt-resize.pl:339 msgid "" "If virt-resize knows how, it will expand the direct content of the " "partition. For example, if the partition is an LVM PV, it will expand the " @@ -25124,26 +25194,26 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:320 +#: ../tools/virt-resize.pl:344 msgid "Currently virt-resize can resize:" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:326 +#: ../tools/virt-resize.pl:350 msgid "" "ext2, ext3 and ext4 filesystems when they are contained directly inside a " "partition." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:331 +#: ../tools/virt-resize.pl:355 msgid "" "NTFS filesystems contained directly in a partition, if libguestfs was " "compiled with support for NTFS." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:334 +#: ../tools/virt-resize.pl:358 msgid "" "The filesystem must have been shut down consistently last time it was used. " "Additionally, L marks the resized filesystem as requiring a " @@ -25152,24 +25222,24 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:341 +#: ../tools/virt-resize.pl:365 msgid "" "LVM PVs (physical volumes). However virt-resize does I resize anything " "inside the PV. The user will have to resize LVs as desired." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:347 ../tools/virt-resize.pl:369 +#: ../tools/virt-resize.pl:371 ../tools/virt-resize.pl:393 msgid "Note that you cannot use C<--expand> and C<--shrink> together." msgstr "" # type: =item -#: ../tools/virt-resize.pl:353 +#: ../tools/virt-resize.pl:377 msgid "B<--shrink part>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:355 +#: ../tools/virt-resize.pl:379 msgid "" "Shrink the named partition until the overall disk image fits in the " "destination. The named partition B contain a filesystem or PV which " @@ -25179,7 +25249,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:361 +#: ../tools/virt-resize.pl:385 msgid "" "The amount by which the overall disk must be shrunk (after carrying out all " "other operations requested by the user) is called the \"deficit\". For " @@ -25190,12 +25260,12 @@ msgid "" msgstr "" # type: =item -#: ../tools/virt-resize.pl:375 +#: ../tools/virt-resize.pl:399 msgid "B<--ignore part>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:377 +#: ../tools/virt-resize.pl:401 msgid "" "Ignore the named partition. Effectively this means the partition is " "allocated on the destination disk, but the content is not copied across from " @@ -25204,12 +25274,12 @@ msgid "" msgstr "" # type: =item -#: ../tools/virt-resize.pl:388 +#: ../tools/virt-resize.pl:412 msgid "B<--delete part>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:390 +#: ../tools/virt-resize.pl:414 msgid "" "Delete the named partition. It would be more accurate to describe this as " "\"don't copy it over\", since virt-resize doesn't do in-place changes and " @@ -25217,7 +25287,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:394 +#: ../tools/virt-resize.pl:418 msgid "" "Note that when you delete a partition, then anything contained in the " "partition is also deleted. Furthermore, this causes any partitions that " @@ -25225,12 +25295,12 @@ msgid "" msgstr "" # type: =item -#: ../tools/virt-resize.pl:405 +#: ../tools/virt-resize.pl:429 msgid "B<--LV-expand logvol>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:407 +#: ../tools/virt-resize.pl:431 msgid "" "This takes the logical volume and, as a final step, expands it to fill all " "the space available in its volume group. A typical usage, assuming a Linux " @@ -25239,7 +25309,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-resize.pl:412 +#: ../tools/virt-resize.pl:436 #, no-wrap msgid "" " virt-resize indisk outdisk \\\n" @@ -25248,14 +25318,14 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:415 +#: ../tools/virt-resize.pl:439 msgid "" "This would first expand the partition (and PV), and then expand the root " "device to fill the extra space in the PV." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:418 +#: ../tools/virt-resize.pl:442 msgid "" "The contents of the LV are also resized if virt-resize knows how to do " "that. You can stop virt-resize from trying to expand the content by using " @@ -25263,12 +25333,12 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:422 +#: ../tools/virt-resize.pl:446 msgid "Use L to list the filesystems in the guest." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:425 +#: ../tools/virt-resize.pl:449 msgid "" "You can give this option multiple times, I it doesn't make sense to do " "this unless the logical volumes you specify are all in different volume " @@ -25276,12 +25346,12 @@ msgid "" msgstr "" # type: =item -#: ../tools/virt-resize.pl:433 +#: ../tools/virt-resize.pl:457 msgid "B<--no-copy-boot-loader>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:435 +#: ../tools/virt-resize.pl:459 msgid "" "By default, virt-resize copies over some sectors at the start of the disk " "(up to the beginning of the first partition). Commonly these sectors " @@ -25290,19 +25360,19 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:440 +#: ../tools/virt-resize.pl:464 msgid "" "If you specify this flag, then this initial copy is not done. You may need " "to reinstall the boot loader in this case." msgstr "" # type: =item -#: ../tools/virt-resize.pl:448 +#: ../tools/virt-resize.pl:472 msgid "B<--no-extra-partition>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:450 +#: ../tools/virt-resize.pl:474 msgid "" "By default, virt-resize creates an extra partition if there is any extra, " "unused space after all resizing has happened. Use this option to prevent " @@ -25312,68 +25382,68 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:456 +#: ../tools/virt-resize.pl:480 msgid "" "Note that if the surplus space is smaller than 10 MB, no extra partition " "will be created." msgstr "" # type: =item -#: ../tools/virt-resize.pl:463 +#: ../tools/virt-resize.pl:487 msgid "B<--no-expand-content>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:465 +#: ../tools/virt-resize.pl:489 msgid "" "By default, virt-resize will try to expand the direct contents of " "partitions, if it knows how (see C<--expand> option above)." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:468 +#: ../tools/virt-resize.pl:492 msgid "" "If you give the C<--no-expand-content> option then virt-resize will not " "attempt this." msgstr "" # type: =item -#: ../tools/virt-resize.pl:475 +#: ../tools/virt-resize.pl:499 msgid "B<-d> | B<--debug>" msgstr "" # type: =item -#: ../tools/virt-resize.pl:483 +#: ../tools/virt-resize.pl:507 msgid "B<-n> | B<--dryrun>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:485 +#: ../tools/virt-resize.pl:509 msgid "Print a summary of what would be done, but don't do anything." msgstr "" # type: =item -#: ../tools/virt-resize.pl:491 +#: ../tools/virt-resize.pl:515 msgid "B<-q> | B<--quiet>" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:493 +#: ../tools/virt-resize.pl:517 msgid "Don't print the summary." msgstr "" # type: =head2 -#: ../tools/virt-resize.pl:1359 ../tools/virt-rescue.pl:90 +#: ../tools/virt-resize.pl:1383 ../tools/virt-rescue.pl:90 msgid "NOTES" msgstr "" # type: =head2 -#: ../tools/virt-resize.pl:1361 +#: ../tools/virt-resize.pl:1385 msgid "\"Partition 1 does not end on cylinder boundary.\"" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1363 +#: ../tools/virt-resize.pl:1387 msgid "" "Virt-resize aligns partitions to multiples of 64 sectors. Usually this " "means the partitions will not be aligned to the ancient CHS geometry. " @@ -25383,12 +25453,12 @@ msgid "" msgstr "" # type: =head2 -#: ../tools/virt-resize.pl:1370 +#: ../tools/virt-resize.pl:1394 msgid "RESIZING WINDOWS VIRTUAL MACHINES" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1372 +#: ../tools/virt-resize.pl:1396 msgid "" "In Windows Vista and later versions, Microsoft switched to using a separate " "boot partition. In these VMs, typically C is the boot partition " @@ -25398,27 +25468,61 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1379 +#: ../tools/virt-resize.pl:1403 msgid "" "Windows may initiate a lengthy \"chkdsk\" on first boot after a resize, if " "NTFS partitions have been expanded. This is just a safety check and (unless " "it find errors) is nothing to worry about." msgstr "" +# type: =head2 +#: ../tools/virt-resize.pl:1407 +msgid "GUEST BOOT STUCK AT \"GRUB\"" +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:1409 +msgid "" +"If a Linux guest does not boot after resizing, and the boot is stuck after " +"printing C on the console, try reinstalling grub. This sometimes " +"happens on older (RHEL 5-era) guests, for reasons we don't fully understand, " +"although we think is to do with partition alignment." +msgstr "" + +# type: verbatim +#: ../tools/virt-resize.pl:1414 +#, no-wrap +msgid "" +" guestfish -i -a newdisk\n" +" > cat /boot/grub/device.map\n" +" # check the contents of this file are sensible or\n" +" # edit the file if necessary\n" +" > grub-install / /dev/vda\n" +" > exit\n" +"\n" +msgstr "" + +# type: textblock +#: ../tools/virt-resize.pl:1421 +msgid "" +"For more flexible guest reconfiguration, including if you need to specify " +"other parameters to grub-install, use L." +msgstr "" + # type: =head1 -#: ../tools/virt-resize.pl:1383 +#: ../tools/virt-resize.pl:1424 msgid "ALTERNATIVE TOOLS" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1385 +#: ../tools/virt-resize.pl:1426 msgid "" "There are several proprietary tools for resizing partitions. We won't " "mention any here." msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1388 +#: ../tools/virt-resize.pl:1429 msgid "" "L and its graphical shell gparted can do some types of resizing " "operations on disk images. They can resize and move partitions, but I don't " @@ -25427,7 +25531,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1393 +#: ../tools/virt-resize.pl:1434 msgid "" "L can do everything that virt-resize can do and a lot more, " "but at a much lower level. You will probably end up hand-calculating sector " @@ -25437,12 +25541,13 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-resize.pl:1401 +#: ../tools/virt-resize.pl:1449 msgid "" "L, L, L, " "L, L, L, L, L, " "L, L, L, L, " -"L, L." +"L, L, L, L, " +"L, L, L." msgstr "" # type: textblock @@ -25501,7 +25606,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-list-filesystems.pl:193 +#: ../tools/virt-list-filesystems.pl:200 msgid "" "L, L, L, L, " "L, L, L, " @@ -25625,7 +25730,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-cat.pl:165 +#: ../tools/virt-cat.pl:172 msgid "" "L, L, L, L, " "L, L, L." @@ -25811,7 +25916,7 @@ msgid "Specify that the input or output tarball is gzip-compressed." msgstr "" # type: textblock -#: ../tools/virt-tar.pl:259 +#: ../tools/virt-tar.pl:266 msgid "" "L, L, L, L, " "L, L, L, " @@ -26005,7 +26110,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-rescue.pl:233 +#: ../tools/virt-rescue.pl:240 msgid "" "L, L, L, L, " "L, L, L." @@ -26416,7 +26521,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-make-fs.pl:529 +#: ../tools/virt-make-fs.pl:536 msgid "" "L, L, L, L, " "L, L, L, L, " @@ -26424,7 +26529,7 @@ msgid "" msgstr "" # type: verbatim -#: ../tools/virt-make-fs.pl:546 +#: ../tools/virt-make-fs.pl:553 #, no-wrap msgid "" " export LIBGUESTFS_DEBUG=1\n" @@ -26433,7 +26538,7 @@ msgid "" msgstr "" # type: textblock -#: ../tools/virt-make-fs.pl:549 +#: ../tools/virt-make-fs.pl:556 msgid "" "Attach /tmp/virt-make-fs.log to a new bug report at " "L" @@ -26504,7 +26609,7 @@ msgid "Display the total size of each block device (as a separate row or rows)." msgstr "" # type: textblock -#: ../tools/virt-list-partitions.pl:231 +#: ../tools/virt-list-partitions.pl:238 msgid "" "L, L, L, " "L, L, L, " diff --git a/po/es.po b/po/es.po index 93b9b21..bf955fe 100644 --- a/po/es.po +++ b/po/es.po @@ -9,7 +9,7 @@ msgstr "" "Project-Id-Version: libguestfs.master\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: \n" "Last-Translator: Héctor Daniel Cabrera \n" "Language-Team: Fedora Spanish \n" @@ -2906,12 +2906,12 @@ msgstr "" "virt-resize: lo sentimos, pero este programa no funciona en un equipo de 32 " "bits\n" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "virt-resize: {file}: no existe o es imposible de leer\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2923,7 +2923,7 @@ msgstr "" "Por favor, lea la página man de virt-resize (1) para obtener mayor " "información.\n" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" @@ -2931,16 +2931,16 @@ msgstr "" "virt-resize: {file}: el archivo es demasiado pequeño para ser una imagen de " "disco ({sz} bytes)\n" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "virt-resize: no existe un volúmen lógico denominado {n}\n" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " @@ -2949,7 +2949,7 @@ msgstr "" "{p}: al utilizar la opción de línea de comando '{opt}', no ha sido " "encontrada la partición en la imagen de disco fuente\n" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" @@ -2957,7 +2957,7 @@ msgstr "" "{p}: partición ignorada, no puede utilizarla en ningún otro argumento de " "línea de comando\n" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" @@ -2965,27 +2965,27 @@ msgstr "" "{p}: partición eliminada, no puede utilizarla en ningún otro argumento de " "línea de comando\n" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "{p}: esta partición ya ha sido marcada para modificar su tamaño\n" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "{p}: falta el campo de tamaño en la opción {o}\n" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "{p}: {f}: no es posible analizar el tamaño del campo\n" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "{p}: el nuevo tamañoo es cero o negativo\n" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2998,13 +2998,13 @@ msgstr "" "contenido que es mayor que el nuevo tamaño solicitado.\n" "Primero tiene que reducir dicho contenido, vea virt-resize (1).\n" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" "virt-resize: no puede utilizar al mismo tiempo las opciones --expand y --" "shrink\n" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" @@ -3014,7 +3014,7 @@ msgstr "" "excedente para poder expandirse. Necesita incrementar el tamaño\n" "del disco de destino, por lo menos en {h}.\n" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" @@ -3023,56 +3023,56 @@ msgstr "" "déficit\n" "(consulte 'deficit' en la página man de virt-resize (1)\n" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "Resumen de modificaciones:\n" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "{p}: la partición será ignorada\n" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "{p}: la partición será eliminada\n" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" "{p}: el tamaño de la partición será modificado de {oldsize} a {newsize}\n" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "{p}: el contenido será expandido utilizando el método '{meth}'\n" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "{p}: la partición será dejada intacta\n" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "{n} VL será expandido a su tamaño máximo\n" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "{n}: el contenido será expandido utilizando el método '{meth}'\n" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "Existe un espacio excedente de {spl} bytes ({h}).\n" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "Una partición extra será creada para el espacio excedente.\n" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" @@ -3080,7 +3080,7 @@ msgstr "" "El espacio excedente no es lo suficientemente amplio para poder\n" "crear una partición extra, y por lo tanto será ignorado.\n" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" @@ -3088,7 +3088,7 @@ msgstr "" "El espacio excedente sera ignorado. Si lo desea, ejecute un programa\n" "de particionamiento en el huésped, para particionar este espacio extra.\n" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -3099,16 +3099,16 @@ msgstr "" "Necesita incrementar el tamaño del disco de destino al menos\n" "con esta cantidad, o modificar los parámetros de su petición.\n" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "virt-resize: el disco fuente no posee una partición primera\n" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "Copiando {p} ...\n" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "Expandiendo {p} utilizando el método '{meth}'\n" diff --git a/po/gu.po b/po/gu.po index 487a747..624d70a 100644 --- a/po/gu.po +++ b/po/gu.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: libguestfs\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: 2010-02-02 13:45+0530\n" "Last-Translator: Sweta Kothari \n" "Language-Team: Gujarati\n" @@ -2824,12 +2824,12 @@ msgstr "" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, fuzzy, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "બાઇનરી '%s' એ અસ્તિત્વ ધરાવતુ નથી અથવા એક્સિક્યૂટેબલ નથી\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2837,61 +2837,61 @@ msgid "" "Please read the virt-resize(1) manpage for more information.\n" msgstr "" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" msgstr "" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, fuzzy, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "LVM લોજીકલ વોલ્યુમનું માપ બદલો" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " "command line option\n" msgstr "" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2900,84 +2900,84 @@ msgid "" "You have to resize the content first, see virt-resize(1).\n" msgstr "" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" "expand into. You need to make the target disk larger by at least {h}.\n" msgstr "" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" msgstr "" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" msgstr "" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" msgstr "" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -2985,16 +2985,16 @@ msgid "" "or adjust your resizing requests.\n" msgstr "" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "" diff --git a/po/hi.po b/po/hi.po index bc2f750..953ef3d 100644 --- a/po/hi.po +++ b/po/hi.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: libguestfs.master.libguestfs\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: 2010-02-16 12:57+0530\n" "Last-Translator: Rajesh Ranjan \n" "Language-Team: Hindi \n" @@ -2827,12 +2827,12 @@ msgstr "" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, fuzzy, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "द्विपदीय '%s' मौजूद नहीं है या निष्पादनीय नहीं है\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2840,61 +2840,61 @@ msgid "" "Please read the virt-resize(1) manpage for more information.\n" msgstr "" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" msgstr "" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, fuzzy, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "LVM लॉजिकल वाल्यूम का आकार बदलें" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " "command line option\n" msgstr "" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2903,84 +2903,84 @@ msgid "" "You have to resize the content first, see virt-resize(1).\n" msgstr "" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" "expand into. You need to make the target disk larger by at least {h}.\n" msgstr "" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" msgstr "" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" msgstr "" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" msgstr "" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -2988,16 +2988,16 @@ msgid "" "or adjust your resizing requests.\n" msgstr "" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "" diff --git a/po/kn.po b/po/kn.po index 013e35d..1ecf217 100644 --- a/po/kn.po +++ b/po/kn.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: libguestfs 1.0.83\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: 2010-02-24 11:56+0530\n" "Last-Translator: Shankar Prasad \n" "Language-Team: kn-IN <>\n" @@ -2836,12 +2836,12 @@ msgstr "" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, fuzzy, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "ಬೈನರಿ '%s' ಅಸ್ತಿತ್ವದಲ್ಲಿಲ್ಲ ಅಥವ ಅದನ್ನು ಕಾರ್ಯಗತಗೊಳಿಸಲು ಸಾಧ್ಯವಿಲ್ಲ\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2849,61 +2849,61 @@ msgid "" "Please read the virt-resize(1) manpage for more information.\n" msgstr "" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" msgstr "" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, fuzzy, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "ಒಂದು LVM ತಾರ್ಕಿಕ ಪರಿಮಾಣದ ಗಾತ್ರವನ್ನು ಬದಲಾಯಿಸು" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " "command line option\n" msgstr "" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2912,84 +2912,84 @@ msgid "" "You have to resize the content first, see virt-resize(1).\n" msgstr "" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" "expand into. You need to make the target disk larger by at least {h}.\n" msgstr "" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" msgstr "" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" msgstr "" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" msgstr "" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -2997,16 +2997,16 @@ msgid "" "or adjust your resizing requests.\n" msgstr "" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "" diff --git a/po/libguestfs.pot b/po/libguestfs.pot index 8c52610..5428c5c 100644 --- a/po/libguestfs.pot +++ b/po/libguestfs.pot @@ -6,10 +6,10 @@ #, fuzzy msgid "" msgstr "" -"Project-Id-Version: libguestfs 1.5.21\n" +"Project-Id-Version: libguestfs 1.5.22\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -2670,12 +2670,12 @@ msgstr "" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2683,61 +2683,61 @@ msgid "" "Please read the virt-resize(1) manpage for more information.\n" msgstr "" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" msgstr "" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " "command line option\n" msgstr "" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2746,84 +2746,84 @@ msgid "" "You have to resize the content first, see virt-resize(1).\n" msgstr "" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" "expand into. You need to make the target disk larger by at least {h}.\n" msgstr "" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" msgstr "" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" msgstr "" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" msgstr "" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -2831,16 +2831,16 @@ msgid "" "or adjust your resizing requests.\n" msgstr "" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "" diff --git a/po/ml.po b/po/ml.po index a29e830..4607b22 100644 --- a/po/ml.po +++ b/po/ml.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: libguestfs.master.libguestfs.ml\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: 2010-02-02 18:35+0530\n" "Last-Translator: Ani Peter | അനി പീറ്റര്‍ \n" "Language-Team: Swathanthra Malayalam Computing | സ്വതന്ത്ര മലയാളം കമ്പ്യൂട്ടിങ് \n" "Language-Team: Marathi \n" @@ -2824,12 +2824,12 @@ msgstr "" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, fuzzy, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "बाइनरी '%s' अस्तित्वात नाही किंवा एक्जीक्यूटेबल नाही\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2837,61 +2837,61 @@ msgid "" "Please read the virt-resize(1) manpage for more information.\n" msgstr "" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" msgstr "" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, fuzzy, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "LVM लॉजीकल वॉल्यूमचे पुनःआकार करा" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " "command line option\n" msgstr "" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2900,84 +2900,84 @@ msgid "" "You have to resize the content first, see virt-resize(1).\n" msgstr "" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" "expand into. You need to make the target disk larger by at least {h}.\n" msgstr "" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" msgstr "" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" msgstr "" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" msgstr "" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -2985,16 +2985,16 @@ msgid "" "or adjust your resizing requests.\n" msgstr "" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "" diff --git a/po/nl.po b/po/nl.po index 56695ac..6a26531 100644 --- a/po/nl.po +++ b/po/nl.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: libguestfs 1.5.4\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: 2010-09-02 15:28+0200\n" "Last-Translator: Geert Warrink \n" "Language-Team: Fedora\n" @@ -2862,12 +2862,12 @@ msgstr "virt-rescue: geen image of VM namen redding opgegeven" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "virt-resize: sorry, dit programma werkt niet op een 32-bit host\n" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "virt-resize: {file}: bestaat niet of is niet leesbaar\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2878,7 +2878,7 @@ msgstr "" "Je moet de bestemming schijf aanmaken voordat je dit programma uitvoert.\n" "Lees de virt-resize(1) man pagina voor meer informatie.\n" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" @@ -2886,16 +2886,16 @@ msgstr "" "virt-resize: {file}: bestand is te klein om een schijf image te zijn ({sz} " "bytes)\n" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "virt-resize: geen logische gevolume aangeroepen {n}\n" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " @@ -2904,7 +2904,7 @@ msgstr "" "{p}: partitie niet gevonden on de bron schijf image bij gebruik van de " "'{opt}' commando-regel optie\n" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" @@ -2912,7 +2912,7 @@ msgstr "" "{p}: partitie genegeerd, je kunt het niet in een ander commando-regel " "argument gebruiken\n" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" @@ -2920,27 +2920,27 @@ msgstr "" "{p}: partitie verwijderd, je kunt het niet in een ander commando-regel " "argument gebruiken\n" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "{p}: deze partitie is al gemarkeerd voor het veranderen in grootte\n" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "{p}: ontbrekende grootte veld in {o} optie\n" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "{p}: {f}: kan size veld niet ontleden\n" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "{p}: nieuwe grootte is nul of negatief\n" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2952,12 +2952,12 @@ msgstr "" "fysieke volume, of andere inhoud bevat die groter is dan de nieuwe grootte.\n" "Je moet de inhoud eerst in grootte veranderen, bekijk virt-resize(1).\n" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" "virt-resize: je kunt de opties --expand en --shrink niet tezamen gebruiken\n" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" @@ -2967,7 +2967,7 @@ msgstr "" "is\n" "voor het expanderen. Je moet de doel schijf tenminste {h} groter maken.\n" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" @@ -2975,56 +2975,56 @@ msgstr "" "virt-resize: fout: kan --shrink niet gebruiken omdat er geen deficit is\n" "(zie 'deficit' in de virt-resize(1) man pagina)\n" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "Samenvatting van de veranderingen:\n" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "{p}: partitie zal genegeerd worden\n" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "{p}: partitie zal verwijderd worden\n" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" "{p}: partitie zal in grootte veranderd worden van {oldsize} naar {newsize}\n" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "{p}: inhoud zal geëxpandeerd worden met de '{meth}' methode\n" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "{p}: partitie zal met rust gelaten worden\n" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "{n}: LV zal geëxpandeerd worden tot de maximale grootte\n" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "{n}: inhoud zal geëxpandeerd worden met de '{meth}' methode\n" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "Er is een overschot van {spl} bytes ({h}).\n" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "Er zal een extra partitie aangemaakt worden voor het overschot.\n" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" @@ -3032,7 +3032,7 @@ msgstr "" "De overschot ruimte is niet groot genoeg om een extra partitie aan te maken\n" "en daarom genegeerd worden.\n" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" @@ -3041,7 +3041,7 @@ msgstr "" "programma in de gast\n" "om deze extra ruimte te partitioneren als je dat wilt.\n" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -3052,16 +3052,16 @@ msgstr "" "Je moet de doel schijf tenminste deze hoeveelheid groter maken,\n" "of jouw in grootte verander verzoek aanpassen.\n" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "virt-resize: bron schijf heeft geen eerste partitie\n" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, fuzzy, perl-brace-format msgid "Copying {p} ...\n" msgstr "{p} kopiëren ..." -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "{p} expanderen met de '{meth}' methode\n" diff --git a/po/or.po b/po/or.po index b9940a7..8b91dae 100644 --- a/po/or.po +++ b/po/or.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: libguestfs.master.or\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: 2010-02-01 18:17+0530\n" "Last-Translator: Manoj Kumar Giri \n" "Language-Team: Oriya \n" @@ -2829,12 +2829,12 @@ msgstr "" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, fuzzy, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "ଦ୍ୱୀମିକ '%s' ଅବସ୍ଥିତ ନାହିଁ ଅଥବା ନିଷ୍ପାଦନ ଯୋଗ୍ୟ ନୁହଁ\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2842,61 +2842,61 @@ msgid "" "Please read the virt-resize(1) manpage for more information.\n" msgstr "" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" msgstr "" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, fuzzy, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "ଗୋଟିଏ LVM ତାର୍କିକ ଭଲ୍ୟୁମର ଆକାର ପରିବର୍ତ୍ତନ କରନ୍ତୁ" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " "command line option\n" msgstr "" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2905,84 +2905,84 @@ msgid "" "You have to resize the content first, see virt-resize(1).\n" msgstr "" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" "expand into. You need to make the target disk larger by at least {h}.\n" msgstr "" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" msgstr "" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" msgstr "" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" msgstr "" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -2990,16 +2990,16 @@ msgid "" "or adjust your resizing requests.\n" msgstr "" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "" diff --git a/po/pa.po b/po/pa.po index 9a28708..e9d8d50 100644 --- a/po/pa.po +++ b/po/pa.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: libguestfs 1.0.81\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: 2010-01-29 12:50+0530\n" "Last-Translator: Jaswinder Singh \n" "Language-Team: Punjabi/Panjabi \n" @@ -2827,12 +2827,12 @@ msgstr "" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, fuzzy, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "ਬਾਇਨਰੀ '%s' ਬੰਦ ਨਹੀਂ ਹੋਇਆ ਜਾਂ ਚੱਲਣਯੋਗ ਨਹੀਂ ਹੈ\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2840,61 +2840,61 @@ msgid "" "Please read the virt-resize(1) manpage for more information.\n" msgstr "" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" msgstr "" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, fuzzy, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "ਇੱਕ LVM ਲਾਜ਼ੀਕਲ ਵਾਲੀਅਮ ਮੁੜ-ਅਕਾਰ ਕਰੋ" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " "command line option\n" msgstr "" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2903,84 +2903,84 @@ msgid "" "You have to resize the content first, see virt-resize(1).\n" msgstr "" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" "expand into. You need to make the target disk larger by at least {h}.\n" msgstr "" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" msgstr "" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" msgstr "" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" msgstr "" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -2988,16 +2988,16 @@ msgid "" "or adjust your resizing requests.\n" msgstr "" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "" diff --git a/po/pl.po b/po/pl.po index 35d4494..ec88a38 100644 --- a/po/pl.po +++ b/po/pl.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: pl\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: 2010-09-23 15:40+0200\n" "Last-Translator: Piotr Drąg \n" "Language-Team: Polish \n" @@ -2884,12 +2884,12 @@ msgstr "" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "virt-rescue: ten program nie działa na 32 bitowym gospodarzu\n" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "virt-resize: {file}: nie istnieje lub nie jest odczytywalny\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2901,23 +2901,23 @@ msgstr "" "Proszę przeczytać stronę podręcznika virt-resize(1), aby dowiedzieć się " "więcej.\n" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" msgstr "" "virt-resize: {file}: plik jest za mały, aby był obrazem dysku ({sz} bajtów)\n" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "virt-resize: brak woluminu logicznego o nazwie {n}\n" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " @@ -2926,7 +2926,7 @@ msgstr "" "{p}: nie odnaleziono partycji w źródłowym obrazie dysku podczas używania " "opcji wiersza poleceń\"{opt}\"\n" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" @@ -2934,7 +2934,7 @@ msgstr "" "{p}: zignorowano partycję, nie można jej używać w kolejnych parametrach " "wiersza poleceń\n" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" @@ -2942,27 +2942,27 @@ msgstr "" "{p}: usunięto partycję, nie można jej używać w kolejnych parametrach wiersza " "poleceń\n" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "{p}: ta partycja została już oznaczona do zmiany rozmiaru\n" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "{p}: brak pola rozmiaru w opcji {o}\n" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "{p}: {f}: nie można przetworzyć pola rozmiaru\n" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "{p}: nowy rozmiar wynosi zero lub jest ujemny\n" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2975,12 +2975,12 @@ msgstr "" "Należy najpierw zmienić rozmiar zawartości, w tym celu proszę zobaczyć " "stronę podręcznika virt-resize(1).\n" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" "virt-resize: nie można używać razem opcji --expand i --shrink together\n" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" @@ -2989,7 +2989,7 @@ msgstr "" "virt-resize: błąd: nie można użyć opcji --expand, kiedy nie ma miejsca na\n" "rozszerzenie. Należy zwiększyć dysk docelowy o co najmniej {h}.\n" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" @@ -2997,55 +2997,55 @@ msgstr "" "virt-resize: błąd: nie można użyć opcji --shrink, ponieważ brak deficytu\n" "(proszę zobaczyć \"deficit\" na stronie podręcznika virt-resize(1)).\n" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "Podsumowanie zmian:\n" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "{p}: partycja zostanie zignorowana\n" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "{p}: partycja zostanie usunięta\n" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "{p}: rozmiar partycji zostanie zmieniony z {oldsize} do {newsize}\n" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "{p}: zawartość zostanie rozszerzona używając metody \"{meth}\"\n" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "{p}: partycja zostanie pozostawiona bez zmian\n" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "{n}: wolumin logiczny zostanie rozszerzony do maksymalnego rozmiaru\n" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "{n}: zawartość zostanie rozszerzona używając metody \"{meth}\"\n" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "Istnieje nadmiar {spl} bajtów ({h}).\n" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "Dodatkowa partycja zostanie utworzona dla nadmiarowego miejsca.\n" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" @@ -3053,7 +3053,7 @@ msgstr "" "Nadmiarowe miejsce nie jest dostatecznie duże do utworzenia dodatkowej\n" "partycji, więc zostanie zignorowane.\n" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" @@ -3062,7 +3062,7 @@ msgstr "" "partycjonowania w gościu, aby partycjonować te dodatkowe miejsce w razie\n" "potrzeby.\n" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -3073,16 +3073,16 @@ msgstr "" "Należy zwiększyć dysk docelowy co najmniej o tę ilość lub dostosować\n" "żądania zmiany rozmiaru.\n" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "virt-resize: dysk źródłowy nie posiada pierwszej partycji\n" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "Kopiowanie {p}...\n" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "Rozszerzanie {p} używając metody \"{meth}\"\n" diff --git a/po/ta.po b/po/ta.po index 0ceb4ff..20fd058 100644 --- a/po/ta.po +++ b/po/ta.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: libguestfs 1.0.81\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: 2010-01-29 13:38+0530\n" "Last-Translator: I. Felix \n" "Language-Team: ta_IN \n" @@ -2833,12 +2833,12 @@ msgstr "" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, fuzzy, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "Binary '%s' does not exist or is not executable\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2846,61 +2846,61 @@ msgid "" "Please read the virt-resize(1) manpage for more information.\n" msgstr "" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" msgstr "" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, fuzzy, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "ஒரு LVM வரைகலை தொகுதியை மறுஅளவிடு" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " "command line option\n" msgstr "" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2909,84 +2909,84 @@ msgid "" "You have to resize the content first, see virt-resize(1).\n" msgstr "" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" "expand into. You need to make the target disk larger by at least {h}.\n" msgstr "" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" msgstr "" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" msgstr "" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" msgstr "" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -2994,16 +2994,16 @@ msgid "" "or adjust your resizing requests.\n" msgstr "" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr "" diff --git a/po/te.po b/po/te.po index 64c641d..7fdf65d 100644 --- a/po/te.po +++ b/po/te.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: libguestfs.master.libguestfs\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-10-01 21:01+0100\n" +"POT-Creation-Date: 2010-10-19 15:17+0100\n" "PO-Revision-Date: 2010-01-27 20:03+0530\n" "Last-Translator: Krishna Babu K \n" "Language-Team: Telugu \n" @@ -2827,12 +2827,12 @@ msgstr "" msgid "virt-resize: sorry this program does not work on a 32 bit host\n" msgstr "" -#: tools/virt-resize.pl:528 +#: tools/virt-resize.pl:552 #, fuzzy, perl-brace-format msgid "virt-resize: {file}: does not exist or is not readable\n" msgstr "బెనరీ '%s' లేదు లేదా అది నిర్వర్తించదగునది కాదు\n" -#: tools/virt-resize.pl:530 +#: tools/virt-resize.pl:554 #, perl-brace-format msgid "" "virt-resize: {file}: does not exist or is not writable\n" @@ -2840,61 +2840,61 @@ msgid "" "Please read the virt-resize(1) manpage for more information.\n" msgstr "" -#: tools/virt-resize.pl:604 tools/virt-resize.pl:607 +#: tools/virt-resize.pl:628 tools/virt-resize.pl:631 #, perl-brace-format msgid "" "virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n" msgstr "" -#: tools/virt-resize.pl:623 tools/virt-resize.pl:635 +#: tools/virt-resize.pl:647 tools/virt-resize.pl:659 msgid "virt-resize: short read" msgstr "" -#: tools/virt-resize.pl:769 +#: tools/virt-resize.pl:793 #, fuzzy, perl-brace-format msgid "virt-resize: no logical volume called {n}\n" msgstr "LVM తార్కిక వాల్యూమ్ పునఃపరిమాణము చేయుము" -#: tools/virt-resize.pl:789 +#: tools/virt-resize.pl:813 #, perl-brace-format msgid "" "{p}: partition not found in the source disk image, when using the '{opt}' " "command line option\n" msgstr "" -#: tools/virt-resize.pl:795 +#: tools/virt-resize.pl:819 #, perl-brace-format msgid "" "{p}: partition ignored, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:799 +#: tools/virt-resize.pl:823 #, perl-brace-format msgid "" "{p}: partition deleted, you cannot use it in another command line argument\n" msgstr "" -#: tools/virt-resize.pl:841 +#: tools/virt-resize.pl:865 #, perl-brace-format msgid "{p}: this partition has already been marked for resizing\n" msgstr "" -#: tools/virt-resize.pl:849 +#: tools/virt-resize.pl:873 #, perl-brace-format msgid "{p}: missing size field in {o} option\n" msgstr "" -#: tools/virt-resize.pl:866 +#: tools/virt-resize.pl:890 #, perl-brace-format msgid "{p}: {f}: cannot parse size field\n" msgstr "" -#: tools/virt-resize.pl:871 +#: tools/virt-resize.pl:895 #, perl-brace-format msgid "{p}: new size is zero or negative\n" msgstr "" -#: tools/virt-resize.pl:894 +#: tools/virt-resize.pl:918 #, perl-brace-format msgid "" "{p}: cannot make this partition smaller because it contains a\n" @@ -2903,84 +2903,84 @@ msgid "" "You have to resize the content first, see virt-resize(1).\n" msgstr "" -#: tools/virt-resize.pl:910 +#: tools/virt-resize.pl:934 msgid "virt-resize: you cannot use options --expand and --shrink together\n" msgstr "" -#: tools/virt-resize.pl:959 +#: tools/virt-resize.pl:983 #, perl-brace-format msgid "" "virt-resize: error: cannot use --expand when there is no surplus space to\n" "expand into. You need to make the target disk larger by at least {h}.\n" msgstr "" -#: tools/virt-resize.pl:974 +#: tools/virt-resize.pl:998 msgid "" "virt-resize: error: cannot use --shrink because there is no deficit\n" "(see 'deficit' in the virt-resize(1) man page)\n" msgstr "" -#: tools/virt-resize.pl:989 +#: tools/virt-resize.pl:1013 msgid "Summary of changes:\n" msgstr "" -#: tools/virt-resize.pl:993 +#: tools/virt-resize.pl:1017 #, perl-brace-format msgid "{p}: partition will be ignored\n" msgstr "" -#: tools/virt-resize.pl:995 +#: tools/virt-resize.pl:1019 #, perl-brace-format msgid "{p}: partition will be deleted\n" msgstr "" -#: tools/virt-resize.pl:997 +#: tools/virt-resize.pl:1021 #, perl-brace-format msgid "{p}: partition will be resized from {oldsize} to {newsize}\n" msgstr "" -#: tools/virt-resize.pl:1002 +#: tools/virt-resize.pl:1026 #, perl-brace-format msgid "{p}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1007 +#: tools/virt-resize.pl:1031 #, perl-brace-format msgid "{p}: partition will be left alone\n" msgstr "" -#: tools/virt-resize.pl:1012 +#: tools/virt-resize.pl:1036 #, perl-brace-format msgid "{n}: LV will be expanded to maximum size\n" msgstr "" -#: tools/virt-resize.pl:1018 +#: tools/virt-resize.pl:1042 #, perl-brace-format msgid "{n}: content will be expanded using the '{meth}' method\n" msgstr "" -#: tools/virt-resize.pl:1025 +#: tools/virt-resize.pl:1049 #, perl-brace-format msgid "There is a surplus of {spl} bytes ({h}).\n" msgstr "" -#: tools/virt-resize.pl:1030 +#: tools/virt-resize.pl:1054 msgid "An extra partition will be created for the surplus.\n" msgstr "" -#: tools/virt-resize.pl:1032 +#: tools/virt-resize.pl:1056 msgid "" "The surplus space is not large enough for an extra partition to be created\n" "and so it will just be ignored.\n" msgstr "" -#: tools/virt-resize.pl:1035 +#: tools/virt-resize.pl:1059 msgid "" "The surplus space will be ignored. Run a partitioning program in the guest\n" "to partition this extra space if you want.\n" msgstr "" -#: tools/virt-resize.pl:1038 +#: tools/virt-resize.pl:1062 #, perl-brace-format msgid "" "virt-resize: error: there is a deficit of {def} bytes ({h}).\n" @@ -2988,16 +2988,16 @@ msgid "" "or adjust your resizing requests.\n" msgstr "" -#: tools/virt-resize.pl:1055 +#: tools/virt-resize.pl:1079 msgid "virt-resize: source disk does not have a first partition\n" msgstr "" -#: tools/virt-resize.pl:1150 +#: tools/virt-resize.pl:1174 #, perl-brace-format msgid "Copying {p} ...\n" msgstr "" -#: tools/virt-resize.pl:1211 tools/virt-resize.pl:1269 +#: tools/virt-resize.pl:1235 tools/virt-resize.pl:1293 #, perl-brace-format msgid "Expanding {p} using the '{meth}' method\n" msgstr ""