X-Git-Url: http://git.annexia.org/?p=libguestfs.git;a=blobdiff_plain;f=src%2Fgenerator.ml;h=86f2fe20414dd2dd297c15004a9daef055722998;hp=c4f285119308fdb4ecd6911e77ac85086474f173;hb=da947eadcfa1367c2d634667068db813a87a6dd1;hpb=875dc84cc01dacb1e254e294a66e179b96fbdbc6

diff --git a/src/generator.ml b/src/generator.ml
index c4f2851..86f2fe2 100755
--- a/src/generator.ml
+++ b/src/generator.ml
@@ -143,13 +143,6 @@ can easily destroy all your data>."
  *
  * Between each test we blockdev-setrw, umount-all, lvm-remove-all.
  *
- * If the appliance is running an older Linux kernel (eg. RHEL 5) then
- * devices are named /dev/hda etc.  To cope with this, the test suite
- * adds some hairly logic to detect this case, and then automagically
- * replaces all strings which match "/dev/sd.*" with "/dev/hd.*".
- * When writing test cases you shouldn't have to worry about this
- * difference.
- *
  * Don't assume anything about the previous contents of the block
  * devices.  Use 'Init*' to create some initial scenarios.
  *
@@ -380,7 +373,7 @@ for whatever operations you want to perform (ie. read access if you
 just want to read the image or write access if you want to modify the
 image).
 
-This is equivalent to the qemu parameter C<-drive file=filename>.
+This is equivalent to the qemu parameter C<-drive file=filename,cache=off>.
 
 Note that this call checks for the existence of C<filename>.  This
 stops you from specifying other types of drive which are supported
@@ -1377,7 +1370,9 @@ or compatible processor architecture).
 The single parameter is an argv-style list of arguments.
 The first element is the name of the program to run.
 Subsequent elements are parameters.  The list must be
-non-empty (ie. must contain a program name).
+non-empty (ie. must contain a program name).  Note that
+the command runs directly, and is I<not> invoked via
+the shell (see C<guestfs_sh>).
 
 The return value is anything printed to I<stdout> by
 the command.
@@ -1445,7 +1440,9 @@ locations.");
    "run a command, returning lines",
    "\
 This is the same as C<guestfs_command>, but splits the
-result into a list of lines.");
+result into a list of lines.
+
+See also: C<guestfs_sh_lines>");
 
   ("stat", (RStat "statbuf", [String "path"]), 52, [],
    [InitBasicFS, Always, TestOutputStruct (
@@ -1662,7 +1659,10 @@ See also C<guestfs_upload>, C<guestfs_cat>.");
       [["write_file"; "/new"; "test\n"; "0"];
        ["checksum"; "sha512"; "/new"]], "0e3e75234abc68f4378a86b3f4b32a198ba301845b0cd6e50106e874345700cc6663a86c1ea125dc5e92be17c98f9a0f85ca9d5f595db2012f7cc3571945c123");
     InitBasicFS, Always, TestOutput (
-      [["mount"; "/dev/sdd"; "/"];
+      (* RHEL 5 thinks this is an HFS+ filesystem unless we give
+       * the type explicitly.
+       *)
+      [["mount_vfs"; "ro"; "squashfs"; "/dev/sdd"; "/"];
        ["checksum"; "md5"; "/known-3"]], "46d6ca27ee07cdc6fa99c2e138cc522c")],
    "compute MD5, SHAx or CRC checksum of file",
    "\
@@ -1982,7 +1982,9 @@ This command writes zeroes over the first few blocks of C<device>.
 
 How many blocks are zeroed isn't specified (but it's I<not> enough
 to securely wipe the device).  It should be sufficient to remove
-any partition tables, filesystem superblocks and so on.");
+any partition tables, filesystem superblocks and so on.
+
+See also: C<guestfs_scrub_device>.");
 
   ("grub_install", (RErr, [String "root"; String "device"]), 86, [],
    [InitBasicFS, Always, TestOutputTrue (
@@ -2347,6 +2349,124 @@ The return value is an integer which C<0> if the operation
 would succeed, or some non-zero value documented in the
 L<ntfs-3g.probe(8)> manual page.");
 
+  ("sh", (RString "output", [String "command"]), 111, [],
+   [], (* XXX needs tests *)
+   "run a command via the shell",
+   "\
+This call runs a command from the guest filesystem via the
+guest's C</bin/sh>.
+
+This is like C<guestfs_command>, but passes the command to:
+
+ /bin/sh -c \"command\"
+
+Depending on the guest's shell, this usually results in
+wildcards being expanded, shell expressions being interpolated
+and so on.
+
+All the provisos about C<guestfs_command> apply to this call.");
+
+  ("sh_lines", (RStringList "lines", [String "command"]), 112, [],
+   [], (* XXX needs tests *)
+   "run a command via the shell returning lines",
+   "\
+This is the same as C<guestfs_sh>, but splits the result
+into a list of lines.
+
+See also: C<guestfs_command_lines>");
+
+  ("glob_expand", (RStringList "paths", [String "pattern"]), 113, [],
+   [InitBasicFS, Always, TestOutputList (
+      [["mkdir_p"; "/a/b/c"];
+       ["touch"; "/a/b/c/d"];
+       ["touch"; "/a/b/c/e"];
+       ["glob_expand"; "/a/b/c/*"]], ["/a/b/c/d"; "/a/b/c/e"]);
+    InitBasicFS, Always, TestOutputList (
+      [["mkdir_p"; "/a/b/c"];
+       ["touch"; "/a/b/c/d"];
+       ["touch"; "/a/b/c/e"];
+       ["glob_expand"; "/a/*/c/*"]], ["/a/b/c/d"; "/a/b/c/e"]);
+    InitBasicFS, Always, TestOutputList (
+      [["mkdir_p"; "/a/b/c"];
+       ["touch"; "/a/b/c/d"];
+       ["touch"; "/a/b/c/e"];
+       ["glob_expand"; "/a/*/x/*"]], [])],
+   "expand a wildcard path",
+   "\
+This command searches for all the pathnames matching
+C<pattern> according to the wildcard expansion rules
+used by the shell.
+
+If no paths match, then this returns an empty list
+(note: not an error).
+
+It is just a wrapper around the C L<glob(3)> function
+with flags C<GLOB_MARK|GLOB_BRACE>.
+See that manual page for more details.");
+
+  ("scrub_device", (RErr, [String "device"]), 114, [DangerWillRobinson],
+   [InitNone, Always, TestRun (	(* use /dev/sdc because it's smaller *)
+      [["scrub_device"; "/dev/sdc"]])],
+   "scrub (securely wipe) a device",
+   "\
+This command writes patterns over C<device> to make data retrieval
+more difficult.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.");
+
+  ("scrub_file", (RErr, [String "file"]), 115, [],
+   [InitBasicFS, Always, TestRun (
+      [["write_file"; "/file"; "content"; "0"];
+       ["scrub_file"; "/file"]])],
+   "scrub (securely wipe) a file",
+   "\
+This command writes patterns over a file to make data retrieval
+more difficult.
+
+The file is I<removed> after scrubbing.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.");
+
+  ("scrub_freespace", (RErr, [String "dir"]), 116, [],
+   [], (* XXX needs testing *)
+   "scrub (securely wipe) free space",
+   "\
+This command creates the directory C<dir> and then fills it
+with files until the filesystem is full, and scrubs the files
+as for C<guestfs_scrub_file>, and deletes them.
+The intention is to scrub any free space on the partition
+containing C<dir>.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.");
+
+  ("mkdtemp", (RString "dir", [String "template"]), 117, [],
+   [InitBasicFS, Always, TestRun (
+      [["mkdir"; "/tmp"];
+       ["mkdtemp"; "/tmp/tmpXXXXXX"]])],
+   "create a temporary directory",
+   "\
+This command creates a temporary directory.  The
+C<template> parameter should be a full pathname for the
+temporary directory name with the final six characters being
+\"XXXXXX\".
+
+For example: \"/tmp/myprogXXXXXX\" or \"/Temp/myprogXXXXXX\",
+the second one being suitable for Windows filesystems.
+
+The name of the temporary directory that was created
+is returned.
+
+The temporary directory is created with mode 0700
+and is owned by root.
+
+The caller is responsible for deleting the temporary
+directory and its contents after use.
+
+See also: L<mkdtemp(3)>");
+
 ]
 
 let all_functions = non_daemon_functions @ daemon_functions
@@ -3631,7 +3751,7 @@ and generate_daemon_actions () =
   ) daemon_functions;
 
   pr "    default:\n";
-  pr "      reply_with_error (\"dispatch_incoming_message: unknown procedure number %%d\", proc_nr);\n";
+  pr "      reply_with_error (\"dispatch_incoming_message: unknown procedure number %%d, set LIBGUESTFS_PATH to point to the matching libguestfs appliance directory\", proc_nr);\n";
   pr "  }\n";
   pr "}\n";
   pr "\n";
@@ -3984,11 +4104,18 @@ int main (int argc, char *argv[])
     printf (\"guestfs_launch FAILED\\n\");
     exit (1);
   }
+
+  /* Set a timeout in case qemu hangs during launch (RHBZ#505329). */
+  alarm (600);
+
   if (guestfs_wait_ready (g) == -1) {
     printf (\"guestfs_wait_ready FAILED\\n\");
     exit (1);
   }
 
+  /* Cancel previous alarm. */
+  alarm (0);
+
   nr_tests = %d;
 
 " (500 * 1024 * 1024) (50 * 1024 * 1024) (10 * 1024 * 1024) nr_tests;
@@ -4800,6 +4927,8 @@ generator (const char *text, int state)
     len = strlen (text);
   }
 
+  rl_attempted_completion_over = 1;
+
   while ((name = commands[index]) != NULL) {
     index++;
     if (strncasecmp (name, text, len) == 0)
@@ -4816,8 +4945,12 @@ char **do_completion (const char *text, int start, int end)
   char **matches = NULL;
 
 #ifdef HAVE_LIBREADLINE
+  rl_completion_append_character = ' ';
+
   if (start == 0)
     matches = rl_completion_matches (text, generator);
+  else if (complete_dest_paths)
+    matches = rl_completion_matches (text, complete_dest_paths_generator);
 #endif
 
   return matches;
@@ -6432,6 +6565,7 @@ static VALUE ruby_guestfs_close (VALUE gv)
       List.iter (
 	function
 	| String n | FileIn n | FileOut n ->
+	    pr "  Check_Type (%sv, T_STRING);\n" n;
 	    pr "  const char *%s = StringValueCStr (%sv);\n" n n;
 	    pr "  if (!%s)\n" n;
 	    pr "    rb_raise (rb_eTypeError, \"expected string for parameter %%s of %%s\",\n";
@@ -6439,7 +6573,8 @@ static VALUE ruby_guestfs_close (VALUE gv)
 	| OptString n ->
 	    pr "  const char *%s = !NIL_P (%sv) ? StringValueCStr (%sv) : NULL;\n" n n n
 	| StringList n ->
-	    pr "  char **%s;" n;
+	    pr "  char **%s;\n" n;
+	    pr "  Check_Type (%sv, T_ARRAY);\n" n;
 	    pr "  {\n";
 	    pr "    int i, len;\n";
 	    pr "    len = RARRAY_LEN (%sv);\n" n;
@@ -7719,6 +7854,19 @@ and generate_lang_bindtests call =
 
   (* XXX Add here tests of the return and error functions. *)
 
+(* This is used to generate the src/MAX_PROC_NR file which
+ * contains the maximum procedure number, a surrogate for the
+ * ABI version number.  See src/Makefile.am for the details.
+ *)
+and generate_max_proc_nr () =
+  let proc_nrs = List.map (
+    fun (_, _, proc_nr, _, _, _, _) -> proc_nr
+  ) daemon_functions in
+
+  let max_proc_nr = List.fold_left max 0 proc_nrs in
+
+  pr "%d\n" max_proc_nr
+
 let output_to filename =
   let filename_new = filename ^ ".new" in
   chan := open_out filename_new;
@@ -7891,3 +8039,7 @@ Run it from the top source directory using the command
   let close = output_to "haskell/bindtests.hs" in
   generate_haskell_bindtests ();
   close ();
+
+  let close = output_to "src/MAX_PROC_NR" in
+  generate_max_proc_nr ();
+  close ();