X-Git-Url: http://git.annexia.org/?p=libguestfs.git;a=blobdiff_plain;f=perl%2Flib%2FSys%2FGuestfs.pm;h=436f218c4d17680377afd7249f8e805f555c4772;hp=0e4dde4d855c89efc7800b9952666a0eb583eac3;hb=ad8a256f54a6cb99f89bb444c8597a152a793dce;hpb=85ed8cef99c19b4143844991d14e0b848fecc5da

diff --git a/perl/lib/Sys/Guestfs.pm b/perl/lib/Sys/Guestfs.pm
index 0e4dde4..436f218 100644
--- a/perl/lib/Sys/Guestfs.pm
+++ b/perl/lib/Sys/Guestfs.pm
@@ -97,6 +97,11 @@ This function adds a virtual CD-ROM disk image to the guest.
 
 This is equivalent to the qemu parameter C<-cdrom filename>.
 
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.
+
 =item $h->add_drive ($filename);
 
 This function adds a virtual machine disk image C<filename> to the
@@ -112,6 +117,30 @@ image).
 
 This is equivalent to the qemu parameter C<-drive file=filename>.
 
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.
+
+=item $h->add_drive_ro ($filename);
+
+This adds a drive in snapshot mode, making it effectively
+read-only.
+
+Note that writes to the device are allowed, and will be seen for
+the duration of the guestfs handle, but they are written
+to a temporary file which is discarded as soon as the guestfs
+handle is closed.  We don't currently have any method to enable
+changes to be committed, although qemu can support this.
+
+This is equivalent to the qemu parameter
+C<-drive file=filename,snapshot=on>.
+
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.
+
 =item $h->aug_close ();
 
 Close the current Augeas handle and free up any resources
@@ -403,7 +432,9 @@ or compatible processor architecture).
 The single parameter is an argv-style list of arguments.
 The first element is the name of the program to run.
 Subsequent elements are parameters.  The list must be
-non-empty (ie. must contain a program name).
+non-empty (ie. must contain a program name).  Note that
+the command runs directly, and is I<not> invoked via
+the shell (see C<$h-E<gt>sh>).
 
 The return value is anything printed to I<stdout> by
 the command.
@@ -432,6 +463,8 @@ FTP.
 This is the same as C<$h-E<gt>command>, but splits the
 result into a list of lines.
 
+See also: C<$h-E<gt>sh_lines>
+
 Because of the message protocol, there is a transfer limit 
 of somewhere between 2MB and 4MB.  To transfer large files you should use
 FTP.
@@ -499,6 +532,15 @@ Setting C<whattodrop> to 3 should drop everything.
 This automatically calls L<sync(2)> before the operation,
 so that the maximum guest memory is freed.
 
+=item $h->e2fsck_f ($device);
+
+This runs C<e2fsck -p -f device>, ie. runs the ext2/ext3
+filesystem checker on C<device>, noninteractively (C<-p>),
+even if the filesystem appears to be clean (C<-f>).
+
+This command is only needed because of C<$h-E<gt>resize2fs>
+(q.v.).  Normally you should use C<$h-E<gt>fsck>.
+
 =item $h->end_busy ();
 
 This sets the state to C<READY>, or if in C<CONFIG> then it leaves the
@@ -531,6 +573,33 @@ The exact command which runs is C<file -bsL path>.  Note in
 particular that the filename is not prepended to the output
 (the C<-b> option).
 
+=item @names = $h->find ($directory);
+
+This command lists out all files and directories, recursively,
+starting at C<directory>.  It is essentially equivalent to
+running the shell command C<find directory -print> but some
+post-processing happens on the output, described below.
+
+This returns a list of strings I<without any prefix>.  Thus
+if the directory structure was:
+
+ /tmp/a
+ /tmp/b
+ /tmp/c/d
+
+then the returned list from C<$h-E<gt>find> C</tmp> would be
+4 elements:
+
+ a
+ b
+ c
+ c/d
+
+If C<directory> is not a directory, then this command returns
+an error.
+
+The returned list is sorted.
+
 =item $status = $h->fsck ($fstype, $device);
 
 This runs the filesystem checker (fsck) on C<device> which
@@ -607,6 +676,19 @@ For more information on states, see L<guestfs(3)>.
 
 This returns the verbose messages flag.
 
+=item @paths = $h->glob_expand ($pattern);
+
+This command searches for all the pathnames matching
+C<pattern> according to the wildcard expansion rules
+used by the shell.
+
+If no paths match, then this returns an empty list
+(note: not an error).
+
+It is just a wrapper around the C L<glob(3)> function
+with flags C<GLOB_MARK|GLOB_BRACE>.
+See that manual page for more details.
+
 =item $h->grub_install ($root, $device);
 
 This command installs GRUB (the Grand Unified Bootloader) on
@@ -740,6 +822,12 @@ the path to the LV, such as C</dev/VG/LV>.
 You can also remove all LVs in a volume group by specifying
 the VG name, C</dev/VG>.
 
+=item $h->lvresize ($device, $mbytes);
+
+This resizes (expands or shrinks) an existing LVM logical
+volume to C<mbytes>.  When reducing, data in the reduced part
+is lost.
+
 =item @logvols = $h->lvs ();
 
 List all the logical volumes detected.  This is the equivalent
@@ -818,6 +906,20 @@ Some internal mounts are not shown.
 This moves a file from C<src> to C<dest> where C<dest> is
 either a destination filename or destination directory.
 
+=item $status = $h->ntfs_3g_probe ($rw, $device);
+
+This command runs the L<ntfs-3g.probe(8)> command which probes
+an NTFS C<device> for mountability.  (Not all NTFS volumes can
+be mounted read-write, and some cannot be mounted at all).
+
+C<rw> is a boolean flag.  Set it to true if you want to test
+if the volume can be mounted read-write.  Set it to false if
+you want to test if the volume can be mounted read-only.
+
+The return value is an integer which C<0> if the operation
+would succeed, or some non-zero value documented in the
+L<ntfs-3g.probe(8)> manual page.
+
 =item $h->ping_daemon ();
 
 This is a test probe into the guestfs daemon running inside
@@ -872,6 +974,17 @@ Note that this function cannot correctly handle binary files
 as end of line).  For those you need to use the C<$h-E<gt>read_file>
 function which has a more complex interface.
 
+=item $h->resize2fs ($device);
+
+This resizes an ext2 or ext3 filesystem to match the size of
+the underlying device.
+
+I<Note:> It is sometimes required that you run C<$h-E<gt>e2fsck_f>
+on the C<device> before calling this command.  For unknown reasons
+C<resize2fs> sometimes gives an error about this and sometimes not.
+In any case, it is always safe to call C<$h-E<gt>e2fsck_f> before
+calling this function.
+
 =item $h->rm ($path);
 
 Remove the single file C<path>.
@@ -1029,6 +1142,32 @@ This displays the partition table on C<device>, in the
 human-readable output of the L<sfdisk(8)> command.  It is
 not intended to be parsed.
 
+=item $output = $h->sh ($command);
+
+This call runs a command from the guest filesystem via the
+guest's C</bin/sh>.
+
+This is like C<$h-E<gt>command>, but passes the command to:
+
+ /bin/sh -c "command"
+
+Depending on the guest's shell, this usually results in
+wildcards being expanded, shell expressions being interpolated
+and so on.
+
+All the provisos about C<$h-E<gt>command> apply to this call.
+
+=item @lines = $h->sh_lines ($command);
+
+This is the same as C<$h-E<gt>sh>, but splits the result
+into a list of lines.
+
+See also: C<$h-E<gt>command_lines>
+
+=item $h->sleep ($secs);
+
+Sleep for C<secs> seconds.
+
 =item %statbuf = $h->stat ($path);
 
 Returns file information for the given C<path>.