X-Git-Url: http://git.annexia.org/?p=libguestfs.git;a=blobdiff_plain;f=perl%2Flib%2FSys%2FGuestfs.pm;h=3d15738a171de0313cb212e92a3523ad90023712;hp=29414662eb989279de6440fe67d9c40566705810;hb=826020fe18bf2eee43f8afea392874bb88c0650a;hpb=e7eca50046e9a69dac27c0bee832af0a3014e02c

diff --git a/perl/lib/Sys/Guestfs.pm b/perl/lib/Sys/Guestfs.pm
index 2941466..3d15738 100644
--- a/perl/lib/Sys/Guestfs.pm
+++ b/perl/lib/Sys/Guestfs.pm
@@ -91,13 +91,18 @@ sub new {
   return $self;
 }
 
-=item $h->add_cdrom (filename);
+=item $h->add_cdrom ($filename);
 
 This function adds a virtual CD-ROM disk image to the guest.
 
 This is equivalent to the qemu parameter C<-cdrom filename>.
 
-=item $h->add_drive (filename);
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.
+
+=item $h->add_drive ($filename);
 
 This function adds a virtual machine disk image C<filename> to the
 guest.  The first time you call this function, the disk appears as IDE
@@ -110,7 +115,31 @@ for whatever operations you want to perform (ie. read access if you
 just want to read the image or write access if you want to modify the
 image).
 
-This is equivalent to the qemu parameter C<-drive file=filename>.
+This is equivalent to the qemu parameter C<-drive file=filename,cache=off>.
+
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.
+
+=item $h->add_drive_ro ($filename);
+
+This adds a drive in snapshot mode, making it effectively
+read-only.
+
+Note that writes to the device are allowed, and will be seen for
+the duration of the guestfs handle, but they are written
+to a temporary file which is discarded as soon as the guestfs
+handle is closed.  We don't currently have any method to enable
+changes to be committed, although qemu can support this.
+
+This is equivalent to the qemu parameter
+C<-drive file=filename,snapshot=on>.
+
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<$h-E<gt>config> call instead.
 
 =item $h->aug_close ();
 
@@ -119,7 +148,7 @@ used by it.  After calling this, you have to call
 C<$h-E<gt>aug_init> again before you can use any other
 Augeas functions.
 
-=item ($nrnodes, $created) = $h->aug_defnode (name, expr, val);
+=item ($nrnodes, $created) = $h->aug_defnode ($name, $expr, $val);
 
 Defines a variable C<name> whose value is the result of
 evaluating C<expr>.
@@ -132,7 +161,7 @@ On success this returns a pair containing the
 number of nodes in the nodeset, and a boolean flag
 if a node was created.
 
-=item $nrnodes = $h->aug_defvar (name, expr);
+=item $nrnodes = $h->aug_defvar ($name, $expr);
 
 Defines an Augeas variable C<name> whose value is the result
 of evaluating C<expr>.  If C<expr> is NULL, then C<name> is
@@ -141,12 +170,12 @@ undefined.
 On success this returns the number of nodes in C<expr>, or
 C<0> if C<expr> evaluates to something which is not a nodeset.
 
-=item $val = $h->aug_get (path);
+=item $val = $h->aug_get ($path);
 
 Look up the value associated with C<path>.  If C<path>
 matches exactly one node, the C<value> is returned.
 
-=item $h->aug_init (root, flags);
+=item $h->aug_init ($root, $flags);
 
 Create a new Augeas handle for editing configuration files.
 If there was any previous Augeas handle associated with this
@@ -164,28 +193,28 @@ integers:
 
 =over 4
 
-=item 1 C<AUG_SAVE_BACKUP>
+=item C<AUG_SAVE_BACKUP> = 1
 
 Keep the original file with a C<.augsave> extension.
 
-=item 2 C<AUG_SAVE_NEWFILE>
+=item C<AUG_SAVE_NEWFILE> = 2
 
 Save changes into a file with extension C<.augnew>, and
 do not overwrite original.  Overrides C<AUG_SAVE_BACKUP>.
 
-=item 4 C<AUG_TYPE_CHECK>
+=item C<AUG_TYPE_CHECK> = 4
 
 Typecheck lenses (can be expensive).
 
-=item 8 C<AUG_NO_STDINC>
+=item C<AUG_NO_STDINC> = 8
 
 Do not use standard load path for modules.
 
-=item 16 C<AUG_SAVE_NOOP>
+=item C<AUG_SAVE_NOOP> = 16
 
 Make save a no-op, just record what would have been changed.
 
-=item 32 C<AUG_NO_LOAD>
+=item C<AUG_NO_LOAD> = 32
 
 Do not load the tree in C<$h-E<gt>aug_init>.
 
@@ -195,7 +224,7 @@ To close the handle, you can call C<$h-E<gt>aug_close>.
 
 To find out more about Augeas, see L<http://augeas.net/>.
 
-=item $h->aug_insert (path, label, before);
+=item $h->aug_insert ($path, $label, $before);
 
 Create a new sibling C<label> for C<path>, inserting it into
 the tree before or after C<path> (depending on the boolean
@@ -212,18 +241,23 @@ Load files into the tree.
 See C<aug_load> in the Augeas documentation for the full gory
 details.
 
-=item @matches = $h->aug_match (path);
+=item @matches = $h->aug_ls ($path);
+
+This is just a shortcut for listing C<$h-E<gt>aug_match>
+C<path/*> and sorting the resulting nodes into alphabetical order.
+
+=item @matches = $h->aug_match ($path);
 
 Returns a list of paths which match the path expression C<path>.
 The returned paths are sufficiently qualified so that they match
 exactly one node in the current tree.
 
-=item $h->aug_mv (src, dest);
+=item $h->aug_mv ($src, $dest);
 
 Move the node C<src> to C<dest>.  C<src> must match exactly
 one node.  C<dest> is overwritten if it exists.
 
-=item $nrnodes = $h->aug_rm (path);
+=item $nrnodes = $h->aug_rm ($path);
 
 Remove C<path> and all of its children.
 
@@ -236,24 +270,206 @@ This writes all pending changes to disk.
 The flags which were passed to C<$h-E<gt>aug_init> affect exactly
 how files are saved.
 
-=item $h->aug_set (path, val);
+=item $h->aug_set ($path, $val);
 
 Set the value associated with C<path> to C<value>.
 
-=item $content = $h->cat (path);
+=item $h->blockdev_flushbufs ($device);
+
+This tells the kernel to flush internal buffers associated
+with C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=item $blocksize = $h->blockdev_getbsz ($device);
+
+This returns the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=item $ro = $h->blockdev_getro ($device);
+
+Returns a boolean indicating if the block device is read-only
+(true if read-only, false if not).
+
+This uses the L<blockdev(8)> command.
+
+=item $sizeinbytes = $h->blockdev_getsize64 ($device);
+
+This returns the size of the device in bytes.
+
+See also C<$h-E<gt>blockdev_getsz>.
+
+This uses the L<blockdev(8)> command.
+
+=item $sectorsize = $h->blockdev_getss ($device);
+
+This returns the size of sectors on a block device.
+Usually 512, but can be larger for modern devices.
+
+(Note, this is not the size in sectors, use C<$h-E<gt>blockdev_getsz>
+for that).
+
+This uses the L<blockdev(8)> command.
+
+=item $sizeinsectors = $h->blockdev_getsz ($device);
+
+This returns the size of the device in units of 512-byte sectors
+(even if the sectorsize isn't 512 bytes ... weird).
+
+See also C<$h-E<gt>blockdev_getss> for the real sector size of
+the device, and C<$h-E<gt>blockdev_getsize64> for the more
+useful I<size in bytes>.
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_rereadpt ($device);
+
+Reread the partition table on C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_setbsz ($device, $blocksize);
+
+This sets the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_setro ($device);
+
+Sets the block device named C<device> to read-only.
+
+This uses the L<blockdev(8)> command.
+
+=item $h->blockdev_setrw ($device);
+
+Sets the block device named C<device> to read-write.
+
+This uses the L<blockdev(8)> command.
+
+=item $content = $h->cat ($path);
 
 Return the contents of the file named C<path>.
 
 Note that this function cannot correctly handle binary files
 (specifically, files containing C<\0> character which is treated
-as end of string).  For those you need to use the C<$h-E<gt>read_file>
+as end of string).  For those you need to use the C<$h-E<gt>download>
 function which has a more complex interface.
 
 Because of the message protocol, there is a transfer limit 
 of somewhere between 2MB and 4MB.  To transfer large files you should use
 FTP.
 
-=item $h->config (qemuparam, qemuvalue);
+=item $checksum = $h->checksum ($csumtype, $path);
+
+This call computes the MD5, SHAx or CRC checksum of the
+file named C<path>.
+
+The type of checksum to compute is given by the C<csumtype>
+parameter which must have one of the following values:
+
+=over 4
+
+=item C<crc>
+
+Compute the cyclic redundancy check (CRC) specified by POSIX
+for the C<cksum> command.
+
+=item C<md5>
+
+Compute the MD5 hash (using the C<md5sum> program).
+
+=item C<sha1>
+
+Compute the SHA1 hash (using the C<sha1sum> program).
+
+=item C<sha224>
+
+Compute the SHA224 hash (using the C<sha224sum> program).
+
+=item C<sha256>
+
+Compute the SHA256 hash (using the C<sha256sum> program).
+
+=item C<sha384>
+
+Compute the SHA384 hash (using the C<sha384sum> program).
+
+=item C<sha512>
+
+Compute the SHA512 hash (using the C<sha512sum> program).
+
+=back
+
+The checksum is returned as a printable string.
+
+=item $h->chmod ($mode, $path);
+
+Change the mode (permissions) of C<path> to C<mode>.  Only
+numeric modes are supported.
+
+=item $h->chown ($owner, $group, $path);
+
+Change the file owner to C<owner> and group to C<group>.
+
+Only numeric uid and gid are supported.  If you want to use
+names, you will need to locate and parse the password file
+yourself (Augeas support makes this relatively easy).
+
+=item $output = $h->command (\@arguments);
+
+This call runs a command from the guest filesystem.  The
+filesystem must be mounted, and must contain a compatible
+operating system (ie. something Linux, with the same
+or compatible processor architecture).
+
+The single parameter is an argv-style list of arguments.
+The first element is the name of the program to run.
+Subsequent elements are parameters.  The list must be
+non-empty (ie. must contain a program name).  Note that
+the command runs directly, and is I<not> invoked via
+the shell (see C<$h-E<gt>sh>).
+
+The return value is anything printed to I<stdout> by
+the command.
+
+If the command returns a non-zero exit status, then
+this function returns an error message.  The error message
+string is the content of I<stderr> from the command.
+
+The C<$PATH> environment variable will contain at least
+C</usr/bin> and C</bin>.  If you require a program from
+another location, you should provide the full path in the
+first parameter.
+
+Shared libraries and data files required by the program
+must be available on filesystems which are mounted in the
+correct places.  It is the caller's responsibility to ensure
+all filesystems that are needed are mounted at the right
+locations.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=item @lines = $h->command_lines (\@arguments);
+
+This is the same as C<$h-E<gt>command>, but splits the
+result into a list of lines.
+
+See also: C<$h-E<gt>sh_lines>
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=item $h->config ($qemuparam, $qemuvalue);
 
 This can be used to add arbitrary qemu command line parameters
 of the form C<-param value>.  Actually it's not quite arbitrary - we
@@ -264,10 +480,177 @@ The first character of C<param> string must be a C<-> (dash).
 
 C<value> can be NULL.
 
+=item $h->cp ($src, $dest);
+
+This copies a file from C<src> to C<dest> where C<dest> is
+either a destination filename or destination directory.
+
+=item $h->cp_a ($src, $dest);
+
+This copies a file or directory from C<src> to C<dest>
+recursively using the C<cp -a> command.
+
+=item $result = $h->debug ($subcmd, \@extraargs);
+
+The C<$h-E<gt>debug> command exposes some internals of
+C<guestfsd> (the guestfs daemon) that runs inside the
+qemu subprocess.
+
+There is no comprehensive help for this command.  You have
+to look at the file C<daemon/debug.c> in the libguestfs source
+to find out what you can do.
+
+=item $kmsgs = $h->dmesg ();
+
+This returns the kernel messages (C<dmesg> output) from
+the guest kernel.  This is sometimes useful for extended
+debugging of problems.
+
+Another way to get the same information is to enable
+verbose messages with C<$h-E<gt>set_verbose> or by setting
+the environment variable C<LIBGUESTFS_DEBUG=1> before
+running the program.
+
+=item $h->download ($remotefilename, $filename);
+
+Download file C<remotefilename> and save it as C<filename>
+on the local machine.
+
+C<filename> can also be a named pipe.
+
+See also C<$h-E<gt>upload>, C<$h-E<gt>cat>.
+
+=item $h->drop_caches ($whattodrop);
+
+This instructs the guest kernel to drop its page cache,
+and/or dentries and inode caches.  The parameter C<whattodrop>
+tells the kernel what precisely to drop, see
+L<http://linux-mm.org/Drop_Caches>
+
+Setting C<whattodrop> to 3 should drop everything.
+
+This automatically calls L<sync(2)> before the operation,
+so that the maximum guest memory is freed.
+
+=item $h->e2fsck_f ($device);
+
+This runs C<e2fsck -p -f device>, ie. runs the ext2/ext3
+filesystem checker on C<device>, noninteractively (C<-p>),
+even if the filesystem appears to be clean (C<-f>).
+
+This command is only needed because of C<$h-E<gt>resize2fs>
+(q.v.).  Normally you should use C<$h-E<gt>fsck>.
+
+=item $h->end_busy ();
+
+This sets the state to C<READY>, or if in C<CONFIG> then it leaves the
+state as is.  This is only used when implementing
+actions using the low-level API.
+
+For more information on states, see L<guestfs(3)>.
+
+=item $equality = $h->equal ($file1, $file2);
+
+This compares the two files C<file1> and C<file2> and returns
+true if their content is exactly equal, or false otherwise.
+
+The external L<cmp(1)> program is used for the comparison.
+
+=item $existsflag = $h->exists ($path);
+
+This returns C<true> if and only if there is a file, directory
+(or anything) with the given C<path> name.
+
+See also C<$h-E<gt>is_file>, C<$h-E<gt>is_dir>, C<$h-E<gt>stat>.
+
+=item $description = $h->file ($path);
+
+This call uses the standard L<file(1)> command to determine
+the type or contents of the file.  This also works on devices,
+for example to find out whether a partition contains a filesystem.
+
+The exact command which runs is C<file -bsL path>.  Note in
+particular that the filename is not prepended to the output
+(the C<-b> option).
+
+=item @names = $h->find ($directory);
+
+This command lists out all files and directories, recursively,
+starting at C<directory>.  It is essentially equivalent to
+running the shell command C<find directory -print> but some
+post-processing happens on the output, described below.
+
+This returns a list of strings I<without any prefix>.  Thus
+if the directory structure was:
+
+ /tmp/a
+ /tmp/b
+ /tmp/c/d
+
+then the returned list from C<$h-E<gt>find> C</tmp> would be
+4 elements:
+
+ a
+ b
+ c
+ c/d
+
+If C<directory> is not a directory, then this command returns
+an error.
+
+The returned list is sorted.
+
+=item $status = $h->fsck ($fstype, $device);
+
+This runs the filesystem checker (fsck) on C<device> which
+should have filesystem type C<fstype>.
+
+The returned integer is the status.  See L<fsck(8)> for the
+list of status codes from C<fsck>.
+
+Notes:
+
+=over 4
+
+=item *
+
+Multiple status codes can be summed together.
+
+=item *
+
+A non-zero return code can mean "success", for example if
+errors have been corrected on the filesystem.
+
+=item *
+
+Checking or repairing NTFS volumes is not supported
+(by linux-ntfs).
+
+=back
+
+This command is entirely equivalent to running C<fsck -a -t fstype device>.
+
+=item $append = $h->get_append ();
+
+Return the additional kernel options which are added to the
+guest kernel command line.
+
+If C<NULL> then no options are added.
+
 =item $autosync = $h->get_autosync ();
 
 Get the autosync flag.
 
+=item $label = $h->get_e2label ($device);
+
+This returns the ext2/3/4 filesystem label of the filesystem on
+C<device>.
+
+=item $uuid = $h->get_e2uuid ($device);
+
+This returns the ext2/3/4 filesystem UUID of the filesystem on
+C<device>.
+
 =item $path = $h->get_path ();
 
 Return the current search path.
@@ -275,10 +658,118 @@ Return the current search path.
 This is always non-NULL.  If it wasn't set already, then this will
 return the default path.
 
+=item $qemu = $h->get_qemu ();
+
+Return the current qemu binary.
+
+This is always non-NULL.  If it wasn't set already, then this will
+return the default qemu binary name.
+
+=item $state = $h->get_state ();
+
+This returns the current state as an opaque integer.  This is
+only useful for printing debug and internal error messages.
+
+For more information on states, see L<guestfs(3)>.
+
 =item $verbose = $h->get_verbose ();
 
 This returns the verbose messages flag.
 
+=item @paths = $h->glob_expand ($pattern);
+
+This command searches for all the pathnames matching
+C<pattern> according to the wildcard expansion rules
+used by the shell.
+
+If no paths match, then this returns an empty list
+(note: not an error).
+
+It is just a wrapper around the C L<glob(3)> function
+with flags C<GLOB_MARK|GLOB_BRACE>.
+See that manual page for more details.
+
+=item $h->grub_install ($root, $device);
+
+This command installs GRUB (the Grand Unified Bootloader) on
+C<device>, with the root directory being C<root>.
+
+=item @lines = $h->head ($path);
+
+This command returns up to the first 10 lines of a file as
+a list of strings.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=item @lines = $h->head_n ($nrlines, $path);
+
+If the parameter C<nrlines> is a positive number, this returns the first
+C<nrlines> lines of the file C<path>.
+
+If the parameter C<nrlines> is a negative number, this returns lines
+from the file C<path>, excluding the last C<nrlines> lines.
+
+If the parameter C<nrlines> is zero, this returns an empty list.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=item $dump = $h->hexdump ($path);
+
+This runs C<hexdump -C> on the given C<path>.  The result is
+the human-readable, canonical hex dump of the file.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=item $busy = $h->is_busy ();
+
+This returns true iff this handle is busy processing a command
+(in the C<BUSY> state).
+
+For more information on states, see L<guestfs(3)>.
+
+=item $config = $h->is_config ();
+
+This returns true iff this handle is being configured
+(in the C<CONFIG> state).
+
+For more information on states, see L<guestfs(3)>.
+
+=item $dirflag = $h->is_dir ($path);
+
+This returns C<true> if and only if there is a directory
+with the given C<path> name.  Note that it returns false for
+other objects like files.
+
+See also C<$h-E<gt>stat>.
+
+=item $fileflag = $h->is_file ($path);
+
+This returns C<true> if and only if there is a file
+with the given C<path> name.  Note that it returns false for
+other objects like directories.
+
+See also C<$h-E<gt>stat>.
+
+=item $launching = $h->is_launching ();
+
+This returns true iff this handle is launching the subprocess
+(in the C<LAUNCHING> state).
+
+For more information on states, see L<guestfs(3)>.
+
+=item $ready = $h->is_ready ();
+
+This returns true iff this handle is ready to accept commands
+(in the C<READY> state).
+
+For more information on states, see L<guestfs(3)>.
+
 =item $h->kill_subprocess ();
 
 This kills the qemu subprocess.  You should never need to call this.
@@ -306,7 +797,7 @@ The full partition device names are returned, eg. C</dev/sda1>
 This does not return logical volumes.  For that you will need to
 call C<$h-E<gt>lvs>.
 
-=item $listing = $h->ll (directory);
+=item $listing = $h->ll ($directory);
 
 List the files in C<directory> (relative to the root directory,
 there is no cwd) in the format of 'ls -la'.
@@ -314,7 +805,7 @@ there is no cwd) in the format of 'ls -la'.
 This command is mostly useful for interactive sessions.  It
 is I<not> intended that you try to parse the output string.
 
-=item @listing = $h->ls (directory);
+=item @listing = $h->ls ($directory);
 
 List the files in C<directory> (relative to the root directory,
 there is no cwd).  The '.' and '..' entries are not returned, but
@@ -323,6 +814,43 @@ hidden files are shown.
 This command is mostly useful for interactive sessions.  Programs
 should probably use C<$h-E<gt>readdir> instead.
 
+=item %statbuf = $h->lstat ($path);
+
+Returns file information for the given C<path>.
+
+This is the same as C<$h-E<gt>stat> except that if C<path>
+is a symbolic link, then the link is stat-ed, not the file it
+refers to.
+
+This is the same as the C<lstat(2)> system call.
+
+=item $h->lvcreate ($logvol, $volgroup, $mbytes);
+
+This creates an LVM volume group called C<logvol>
+on the volume group C<volgroup>, with C<size> megabytes.
+
+=item $h->lvm_remove_all ();
+
+This command removes all LVM logical volumes, volume groups
+and physical volumes.
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=item $h->lvremove ($device);
+
+Remove an LVM logical volume C<device>, where C<device> is
+the path to the LV, such as C</dev/VG/LV>.
+
+You can also remove all LVs in a volume group by specifying
+the VG name, C</dev/VG>.
+
+=item $h->lvresize ($device, $mbytes);
+
+This resizes (expands or shrinks) an existing LVM logical
+volume to C<mbytes>.  When reducing, data in the reduced part
+is lost.
+
 =item @logvols = $h->lvs ();
 
 List all the logical volumes detected.  This is the equivalent
@@ -338,7 +866,43 @@ See also C<$h-E<gt>lvs_full>.
 List all the logical volumes detected.  This is the equivalent
 of the L<lvs(8)> command.  The "full" version includes all fields.
 
-=item $h->mount (device, mountpoint);
+=item $h->mkdir ($path);
+
+Create a directory named C<path>.
+
+=item $h->mkdir_p ($path);
+
+Create a directory named C<path>, creating any parent directories
+as necessary.  This is like the C<mkdir -p> shell command.
+
+=item $dir = $h->mkdtemp ($template);
+
+This command creates a temporary directory.  The
+C<template> parameter should be a full pathname for the
+temporary directory name with the final six characters being
+"XXXXXX".
+
+For example: "/tmp/myprogXXXXXX" or "/Temp/myprogXXXXXX",
+the second one being suitable for Windows filesystems.
+
+The name of the temporary directory that was created
+is returned.
+
+The temporary directory is created with mode 0700
+and is owned by root.
+
+The caller is responsible for deleting the temporary
+directory and its contents after use.
+
+See also: L<mkdtemp(3)>
+
+=item $h->mkfs ($fstype, $device);
+
+This creates a filesystem on C<device> (usually a partition
+or LVM logical volume).  The filesystem type is C<fstype>, for
+example C<ext3>.
+
+=item $h->mount ($device, $mountpoint);
 
 Mount a guest disk at a position in the filesystem.  Block devices
 are named C</dev/sda>, C</dev/sdb> and so on, as they were added to
@@ -357,6 +921,76 @@ on the underlying device.
 The filesystem options C<sync> and C<noatime> are set with this
 call, in order to improve reliability.
 
+=item $h->mount_options ($options, $device, $mountpoint);
+
+This is the same as the C<$h-E<gt>mount> command, but it
+allows you to set the mount options as for the
+L<mount(8)> I<-o> flag.
+
+=item $h->mount_ro ($device, $mountpoint);
+
+This is the same as the C<$h-E<gt>mount> command, but it
+mounts the filesystem with the read-only (I<-o ro>) flag.
+
+=item $h->mount_vfs ($options, $vfstype, $device, $mountpoint);
+
+This is the same as the C<$h-E<gt>mount> command, but it
+allows you to set both the mount options and the vfstype
+as for the L<mount(8)> I<-o> and I<-t> flags.
+
+=item @devices = $h->mounts ();
+
+This returns the list of currently mounted filesystems.  It returns
+the list of devices (eg. C</dev/sda1>, C</dev/VG/LV>).
+
+Some internal mounts are not shown.
+
+=item $h->mv ($src, $dest);
+
+This moves a file from C<src> to C<dest> where C<dest> is
+either a destination filename or destination directory.
+
+=item $status = $h->ntfs_3g_probe ($rw, $device);
+
+This command runs the L<ntfs-3g.probe(8)> command which probes
+an NTFS C<device> for mountability.  (Not all NTFS volumes can
+be mounted read-write, and some cannot be mounted at all).
+
+C<rw> is a boolean flag.  Set it to true if you want to test
+if the volume can be mounted read-write.  Set it to false if
+you want to test if the volume can be mounted read-only.
+
+The return value is an integer which C<0> if the operation
+would succeed, or some non-zero value documented in the
+L<ntfs-3g.probe(8)> manual page.
+
+=item $h->ping_daemon ();
+
+This is a test probe into the guestfs daemon running inside
+the qemu subprocess.  Calling this function checks that the
+daemon responds to the ping message, without affecting the daemon
+or attached block device(s) in any other way.
+
+=item $h->pvcreate ($device);
+
+This creates an LVM physical volume on the named C<device>,
+where C<device> should usually be a partition name such
+as C</dev/sda1>.
+
+=item $h->pvremove ($device);
+
+This wipes a physical volume C<device> so that LVM will no longer
+recognise it.
+
+The implementation uses the C<pvremove> command which refuses to
+wipe physical volumes that contain any volume groups, so you have
+to remove those first.
+
+=item $h->pvresize ($device);
+
+This resizes (expands or shrinks) an existing LVM physical
+volume to match the new size of the underlying device.
+
 =item @physvols = $h->pvs ();
 
 List all the physical volumes detected.  This is the equivalent
@@ -372,7 +1006,7 @@ See also C<$h-E<gt>pvs_full>.
 List all the physical volumes detected.  This is the equivalent
 of the L<pvs(8)> command.  The "full" version includes all fields.
 
-=item @lines = $h->read_lines (path);
+=item @lines = $h->read_lines ($path);
 
 Return the contents of the file named C<path>.
 
@@ -384,31 +1018,271 @@ Note that this function cannot correctly handle binary files
 as end of line).  For those you need to use the C<$h-E<gt>read_file>
 function which has a more complex interface.
 
-=item $h->set_autosync (autosync);
+=item $h->resize2fs ($device);
+
+This resizes an ext2 or ext3 filesystem to match the size of
+the underlying device.
+
+I<Note:> It is sometimes required that you run C<$h-E<gt>e2fsck_f>
+on the C<device> before calling this command.  For unknown reasons
+C<resize2fs> sometimes gives an error about this and sometimes not.
+In any case, it is always safe to call C<$h-E<gt>e2fsck_f> before
+calling this function.
+
+=item $h->rm ($path);
+
+Remove the single file C<path>.
+
+=item $h->rm_rf ($path);
+
+Remove the file or directory C<path>, recursively removing the
+contents if its a directory.  This is like the C<rm -rf> shell
+command.
+
+=item $h->rmdir ($path);
+
+Remove the single directory C<path>.
+
+=item $h->scrub_device ($device);
+
+This command writes patterns over C<device> to make data retrieval
+more difficult.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=item $h->scrub_file ($file);
+
+This command writes patterns over a file to make data retrieval
+more difficult.
+
+The file is I<removed> after scrubbing.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+=item $h->scrub_freespace ($dir);
+
+This command creates the directory C<dir> and then fills it
+with files until the filesystem is full, and scrubs the files
+as for C<$h-E<gt>scrub_file>, and deletes them.
+The intention is to scrub any free space on the partition
+containing C<dir>.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+=item $h->set_append ($append);
+
+This function is used to add additional options to the
+guest kernel command line.
+
+The default is C<NULL> unless overridden by setting
+C<LIBGUESTFS_APPEND> environment variable.
+
+Setting C<append> to C<NULL> means I<no> additional options
+are passed (libguestfs always adds a few of its own).
+
+=item $h->set_autosync ($autosync);
 
 If C<autosync> is true, this enables autosync.  Libguestfs will make a
-best effort attempt to run C<$h-E<gt>sync> when the handle is closed
+best effort attempt to run C<$h-E<gt>umount_all> followed by
+C<$h-E<gt>sync> when the handle is closed
 (also if the program exits without closing handles).
 
-=item $h->set_path (path);
+This is disabled by default (except in guestfish where it is
+enabled by default).
+
+=item $h->set_busy ();
+
+This sets the state to C<BUSY>.  This is only used when implementing
+actions using the low-level API.
+
+For more information on states, see L<guestfs(3)>.
+
+=item $h->set_e2label ($device, $label);
+
+This sets the ext2/3/4 filesystem label of the filesystem on
+C<device> to C<label>.  Filesystem labels are limited to
+16 characters.
+
+You can use either C<$h-E<gt>tune2fs_l> or C<$h-E<gt>get_e2label>
+to return the existing label on a filesystem.
+
+=item $h->set_e2uuid ($device, $uuid);
+
+This sets the ext2/3/4 filesystem UUID of the filesystem on
+C<device> to C<uuid>.  The format of the UUID and alternatives
+such as C<clear>, C<random> and C<time> are described in the
+L<tune2fs(8)> manpage.
+
+You can use either C<$h-E<gt>tune2fs_l> or C<$h-E<gt>get_e2uuid>
+to return the existing UUID of a filesystem.
+
+=item $h->set_path ($path);
 
 Set the path that libguestfs searches for kernel and initrd.img.
 
 The default is C<$libdir/guestfs> unless overridden by setting
 C<LIBGUESTFS_PATH> environment variable.
 
-The string C<path> is stashed in the libguestfs handle, so the caller
-must make sure it remains valid for the lifetime of the handle.
-
 Setting C<path> to C<NULL> restores the default path.
 
-=item $h->set_verbose (verbose);
+=item $h->set_qemu ($qemu);
+
+Set the qemu binary that we will use.
+
+The default is chosen when the library was compiled by the
+configure script.
+
+You can also override this by setting the C<LIBGUESTFS_QEMU>
+environment variable.
+
+Setting C<qemu> to C<NULL> restores the default qemu binary.
+
+=item $h->set_ready ();
+
+This sets the state to C<READY>.  This is only used when implementing
+actions using the low-level API.
+
+For more information on states, see L<guestfs(3)>.
+
+=item $h->set_verbose ($verbose);
 
 If C<verbose> is true, this turns on verbose messages (to C<stderr>).
 
 Verbose messages are disabled unless the environment variable
 C<LIBGUESTFS_DEBUG> is defined and set to C<1>.
 
+=item $h->sfdisk ($device, $cyls, $heads, $sectors, \@lines);
+
+This is a direct interface to the L<sfdisk(8)> program for creating
+partitions on block devices.
+
+C<device> should be a block device, for example C</dev/sda>.
+
+C<cyls>, C<heads> and C<sectors> are the number of cylinders, heads
+and sectors on the device, which are passed directly to sfdisk as
+the I<-C>, I<-H> and I<-S> parameters.  If you pass C<0> for any
+of these, then the corresponding parameter is omitted.  Usually for
+'large' disks, you can just pass C<0> for these, but for small
+(floppy-sized) disks, sfdisk (or rather, the kernel) cannot work
+out the right geometry and you will need to tell it.
+
+C<lines> is a list of lines that we feed to C<sfdisk>.  For more
+information refer to the L<sfdisk(8)> manpage.
+
+To create a single partition occupying the whole disk, you would
+pass C<lines> as a single element list, when the single element being
+the string C<,> (comma).
+
+See also: C<$h-E<gt>sfdisk_l>, C<$h-E<gt>sfdisk_N>
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=item $h->sfdisk_N ($device, $partnum, $cyls, $heads, $sectors, $line);
+
+This runs L<sfdisk(8)> option to modify just the single
+partition C<n> (note: C<n> counts from 1).
+
+For other parameters, see C<$h-E<gt>sfdisk>.  You should usually
+pass C<0> for the cyls/heads/sectors parameters.
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=item $partitions = $h->sfdisk_disk_geometry ($device);
+
+This displays the disk geometry of C<device> read from the
+partition table.  Especially in the case where the underlying
+block device has been resized, this can be different from the
+kernel's idea of the geometry (see C<$h-E<gt>sfdisk_kernel_geometry>).
+
+The result is in human-readable format, and not designed to
+be parsed.
+
+=item $partitions = $h->sfdisk_kernel_geometry ($device);
+
+This displays the kernel's idea of the geometry of C<device>.
+
+The result is in human-readable format, and not designed to
+be parsed.
+
+=item $partitions = $h->sfdisk_l ($device);
+
+This displays the partition table on C<device>, in the
+human-readable output of the L<sfdisk(8)> command.  It is
+not intended to be parsed.
+
+=item $output = $h->sh ($command);
+
+This call runs a command from the guest filesystem via the
+guest's C</bin/sh>.
+
+This is like C<$h-E<gt>command>, but passes the command to:
+
+ /bin/sh -c "command"
+
+Depending on the guest's shell, this usually results in
+wildcards being expanded, shell expressions being interpolated
+and so on.
+
+All the provisos about C<$h-E<gt>command> apply to this call.
+
+=item @lines = $h->sh_lines ($command);
+
+This is the same as C<$h-E<gt>sh>, but splits the result
+into a list of lines.
+
+See also: C<$h-E<gt>command_lines>
+
+=item $h->sleep ($secs);
+
+Sleep for C<secs> seconds.
+
+=item %statbuf = $h->stat ($path);
+
+Returns file information for the given C<path>.
+
+This is the same as the C<stat(2)> system call.
+
+=item %statbuf = $h->statvfs ($path);
+
+Returns file system statistics for any mounted file system.
+C<path> should be a file or directory in the mounted file system
+(typically it is the mount point itself, but it doesn't need to be).
+
+This is the same as the C<statvfs(2)> system call.
+
+=item @stringsout = $h->strings ($path);
+
+This runs the L<strings(1)> command on a file and returns
+the list of printable strings found.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=item @stringsout = $h->strings_e ($encoding, $path);
+
+This is like the C<$h-E<gt>strings> command, but allows you to
+specify the encoding.
+
+See the L<strings(1)> manpage for the full list of encodings.
+
+Commonly useful encodings are C<l> (lower case L) which will
+show strings inside Windows/x86 files.
+
+The returned strings are transcoded to UTF-8.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
 =item $h->sync ();
 
 This syncs the disk, so that any writes are flushed through to the
@@ -417,12 +1291,129 @@ underlying disk image.
 You should always call this if you have modified a disk image, before
 closing the handle.
 
-=item $h->touch (path);
+=item @lines = $h->tail ($path);
+
+This command returns up to the last 10 lines of a file as
+a list of strings.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=item @lines = $h->tail_n ($nrlines, $path);
+
+If the parameter C<nrlines> is a positive number, this returns the last
+C<nrlines> lines of the file C<path>.
+
+If the parameter C<nrlines> is a negative number, this returns lines
+from the file C<path>, starting with the C<-nrlines>th line.
+
+If the parameter C<nrlines> is zero, this returns an empty list.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=item $h->tar_in ($tarfile, $directory);
+
+This command uploads and unpacks local file C<tarfile> (an
+I<uncompressed> tar file) into C<directory>.
+
+To upload a compressed tarball, use C<$h-E<gt>tgz_in>.
+
+=item $h->tar_out ($directory, $tarfile);
+
+This command packs the contents of C<directory> and downloads
+it to local file C<tarfile>.
+
+To download a compressed tarball, use C<$h-E<gt>tgz_out>.
+
+=item $h->tgz_in ($tarball, $directory);
+
+This command uploads and unpacks local file C<tarball> (a
+I<gzip compressed> tar file) into C<directory>.
+
+To upload an uncompressed tarball, use C<$h-E<gt>tar_in>.
+
+=item $h->tgz_out ($directory, $tarball);
+
+This command packs the contents of C<directory> and downloads
+it to local file C<tarball>.
+
+To download an uncompressed tarball, use C<$h-E<gt>tar_out>.
+
+=item $h->touch ($path);
 
 Touch acts like the L<touch(1)> command.  It can be used to
 update the timestamps on a file, or, if the file does not exist,
 to create a new zero-length file.
 
+=item %superblock = $h->tune2fs_l ($device);
+
+This returns the contents of the ext2, ext3 or ext4 filesystem
+superblock on C<device>.
+
+It is the same as running C<tune2fs -l device>.  See L<tune2fs(8)>
+manpage for more details.  The list of fields returned isn't
+clearly defined, and depends on both the version of C<tune2fs>
+that libguestfs was built against, and the filesystem itself.
+
+=item $h->umount ($pathordevice);
+
+This unmounts the given filesystem.  The filesystem may be
+specified either by its mountpoint (path) or the device which
+contains the filesystem.
+
+=item $h->umount_all ();
+
+This unmounts all mounted filesystems.
+
+Some internal mounts are not unmounted by this call.
+
+=item $h->upload ($filename, $remotefilename);
+
+Upload local file C<filename> to C<remotefilename> on the
+filesystem.
+
+C<filename> can also be a named pipe.
+
+See also C<$h-E<gt>download>.
+
+=item $h->vg_activate ($activate, \@volgroups);
+
+This command activates or (if C<activate> is false) deactivates
+all logical volumes in the listed volume groups C<volgroups>.
+If activated, then they are made known to the
+kernel, ie. they appear as C</dev/mapper> devices.  If deactivated,
+then those devices disappear.
+
+This command is the same as running C<vgchange -a y|n volgroups...>
+
+Note that if C<volgroups> is an empty list then B<all> volume groups
+are activated or deactivated.
+
+=item $h->vg_activate_all ($activate);
+
+This command activates or (if C<activate> is false) deactivates
+all logical volumes in all volume groups.
+If activated, then they are made known to the
+kernel, ie. they appear as C</dev/mapper> devices.  If deactivated,
+then those devices disappear.
+
+This command is the same as running C<vgchange -a y|n>
+
+=item $h->vgcreate ($volgroup, \@physvols);
+
+This creates an LVM volume group called C<volgroup>
+from the non-empty list of physical volumes C<physvols>.
+
+=item $h->vgremove ($vgname);
+
+Remove an LVM volume group C<vgname>, (for example C<VG>).
+
+This also forcibly removes all logical volumes in the volume
+group (if any).
+
 =item @volgroups = $h->vgs ();
 
 List all the volumes groups detected.  This is the equivalent
@@ -446,6 +1437,63 @@ using L<qemu(1)>.
 You should call this after C<$h-E<gt>launch> to wait for the launch
 to complete.
 
+=item $chars = $h->wc_c ($path);
+
+This command counts the characters in a file, using the
+C<wc -c> external command.
+
+=item $lines = $h->wc_l ($path);
+
+This command counts the lines in a file, using the
+C<wc -l> external command.
+
+=item $words = $h->wc_w ($path);
+
+This command counts the words in a file, using the
+C<wc -w> external command.
+
+=item $h->write_file ($path, $content, $size);
+
+This call creates a file called C<path>.  The contents of the
+file is the string C<content> (which can contain any 8 bit data),
+with length C<size>.
+
+As a special case, if C<size> is C<0>
+then the length is calculated using C<strlen> (so in this case
+the content cannot contain embedded ASCII NULs).
+
+I<NB.> Owing to a bug, writing content containing ASCII NUL
+characters does I<not> work, even if the length is specified.
+We hope to resolve this bug in a future version.  In the meantime
+use C<$h-E<gt>upload>.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=item $h->zero ($device);
+
+This command writes zeroes over the first few blocks of C<device>.
+
+How many blocks are zeroed isn't specified (but it's I<not> enough
+to securely wipe the device).  It should be sufficient to remove
+any partition tables, filesystem superblocks and so on.
+
+See also: C<$h-E<gt>scrub_device>.
+
+=item $h->zerofree ($device);
+
+This runs the I<zerofree> program on C<device>.  This program
+claims to zero unused inodes and disk blocks on an ext2/3
+filesystem, thus making it possible to compress the filesystem
+more effectively.
+
+You should B<not> run this program if the filesystem is
+mounted.
+
+It is possible that using this program can damage the filesystem
+or data on the filesystem.
+
 =cut
 
 1;