X-Git-Url: http://git.annexia.org/?p=libguestfs.git;a=blobdiff_plain;f=guestfs-actions.pod;h=9afa5de9a6c994ab05e1e7e90e79c349e4483b39;hp=054b65cae60cb3d9a9409ee298891f86c2f9a5c4;hb=d2c0ee0ff7a9afdcdc1605dd464760f98d1b57d7;hpb=b6adf09c4d2cc3f1d0285950c151b1fd7688ec67

diff --git a/guestfs-actions.pod b/guestfs-actions.pod
index 054b65c..9afa5de 100644
--- a/guestfs-actions.pod
+++ b/guestfs-actions.pod
@@ -30,7 +30,7 @@ for whatever operations you want to perform (ie. read access if you
 just want to read the image or write access if you want to modify the
 image).
 
-This is equivalent to the qemu parameter C<-drive file=filename>.
+This is equivalent to the qemu parameter C<-drive file=filename,cache=off>.
 
 Note that this call checks for the existence of C<filename>.  This
 stops you from specifying other types of drive which are supported
@@ -511,7 +511,9 @@ or compatible processor architecture).
 The single parameter is an argv-style list of arguments.
 The first element is the name of the program to run.
 Subsequent elements are parameters.  The list must be
-non-empty (ie. must contain a program name).
+non-empty (ie. must contain a program name).  Note that
+the command runs directly, and is I<not> invoked via
+the shell (see C<guestfs_sh>).
 
 The return value is anything printed to I<stdout> by
 the command.
@@ -546,6 +548,8 @@ FTP.
 This is the same as C<guestfs_command>, but splits the
 result into a list of lines.
 
+See also: C<guestfs_sh_lines>
+
 This function returns a NULL-terminated array of strings
 (like L<environ(3)>), or NULL if there was an error.
 I<The caller must free the strings and the array after use>.
@@ -880,6 +884,26 @@ This returns the verbose messages flag.
 
 This function returns a C truth value on success or -1 on error.
 
+=head2 guestfs_glob_expand
+
+ char **guestfs_glob_expand (guestfs_h *handle,
+		const char *pattern);
+
+This command searches for all the pathnames matching
+C<pattern> according to the wildcard expansion rules
+used by the shell.
+
+If no paths match, then this returns an empty list
+(note: not an error).
+
+It is just a wrapper around the C L<glob(3)> function
+with flags C<GLOB_MARK|GLOB_BRACE>.
+See that manual page for more details.
+
+This function returns a NULL-terminated array of strings
+(like L<environ(3)>), or NULL if there was an error.
+I<The caller must free the strings and the array after use>.
+
 =head2 guestfs_grub_install
 
  int guestfs_grub_install (guestfs_h *handle,
@@ -1266,6 +1290,26 @@ either a destination filename or destination directory.
 
 This function returns 0 on success or -1 on error.
 
+=head2 guestfs_ntfs_3g_probe
+
+ int guestfs_ntfs_3g_probe (guestfs_h *handle,
+		int rw,
+		const char *device);
+
+This command runs the L<ntfs-3g.probe(8)> command which probes
+an NTFS C<device> for mountability.  (Not all NTFS volumes can
+be mounted read-write, and some cannot be mounted at all).
+
+C<rw> is a boolean flag.  Set it to true if you want to test
+if the volume can be mounted read-write.  Set it to false if
+you want to test if the volume can be mounted read-only.
+
+The return value is an integer which C<0> if the operation
+would succeed, or some non-zero value documented in the
+L<ntfs-3g.probe(8)> manual page.
+
+On error this function returns -1.
+
 =head2 guestfs_ping_daemon
 
  int guestfs_ping_daemon (guestfs_h *handle);
@@ -1404,6 +1448,53 @@ Remove the single directory C<path>.
 
 This function returns 0 on success or -1 on error.
 
+=head2 guestfs_scrub_device
+
+ int guestfs_scrub_device (guestfs_h *handle,
+		const char *device);
+
+This command writes patterns over C<device> to make data retrieval
+more difficult.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+This function returns 0 on success or -1 on error.
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=head2 guestfs_scrub_file
+
+ int guestfs_scrub_file (guestfs_h *handle,
+		const char *file);
+
+This command writes patterns over a file to make data retrieval
+more difficult.
+
+The file is I<removed> after scrubbing.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+This function returns 0 on success or -1 on error.
+
+=head2 guestfs_scrub_freespace
+
+ int guestfs_scrub_freespace (guestfs_h *handle,
+		const char *dir);
+
+This command creates the directory C<dir> and then fills it
+with files until the filesystem is full, and scrubs the files
+as for C<guestfs_scrub_file>, and deletes them.
+The intention is to scrub any free space on the partition
+containing C<dir>.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+This function returns 0 on success or -1 on error.
+
 =head2 guestfs_set_append
 
  int guestfs_set_append (guestfs_h *handle,
@@ -1629,6 +1720,41 @@ not intended to be parsed.
 This function returns a string, or NULL on error.
 I<The caller must free the returned string after use>.
 
+=head2 guestfs_sh
+
+ char *guestfs_sh (guestfs_h *handle,
+		const char *command);
+
+This call runs a command from the guest filesystem via the
+guest's C</bin/sh>.
+
+This is like C<guestfs_command>, but passes the command to:
+
+ /bin/sh -c "command"
+
+Depending on the guest's shell, this usually results in
+wildcards being expanded, shell expressions being interpolated
+and so on.
+
+All the provisos about C<guestfs_command> apply to this call.
+
+This function returns a string, or NULL on error.
+I<The caller must free the returned string after use>.
+
+=head2 guestfs_sh_lines
+
+ char **guestfs_sh_lines (guestfs_h *handle,
+		const char *command);
+
+This is the same as C<guestfs_sh>, but splits the result
+into a list of lines.
+
+See also: C<guestfs_command_lines>
+
+This function returns a NULL-terminated array of strings
+(like L<environ(3)>), or NULL if there was an error.
+I<The caller must free the strings and the array after use>.
+
 =head2 guestfs_sleep
 
  int guestfs_sleep (guestfs_h *handle,
@@ -1972,6 +2098,8 @@ How many blocks are zeroed isn't specified (but it's I<not> enough
 to securely wipe the device).  It should be sufficient to remove
 any partition tables, filesystem superblocks and so on.
 
+See also: C<guestfs_scrub_device>.
+
 This function returns 0 on success or -1 on error.
 
 =head2 guestfs_zerofree