X-Git-Url: http://git.annexia.org/?p=libguestfs.git;a=blobdiff_plain;f=guestfish-actions.pod;h=a79e33638160aeb7eccff181024ea4d61d50b2e8;hp=4403cb0b8d4570736fc712d644f7f69f6244eb67;hb=8be6c7056d18cd5aa5edddfc73bfd4206b038cee;hpb=43db06ea892cc157324a6b837ca430607441c509

diff --git a/guestfish-actions.pod b/guestfish-actions.pod
index 4403cb0..a79e336 100644
--- a/guestfish-actions.pod
+++ b/guestfish-actions.pod
@@ -29,7 +29,7 @@ This is equivalent to the qemu parameter C<-drive file=filename>.
 
 Close the current Augeas handle and free up any resources
 used by it.  After calling this, you have to call
-C<aug_init> again before you can use any other
+C<aug-init> again before you can use any other
 Augeas functions.
 
 =head2 aug-defnode
@@ -40,7 +40,7 @@ Defines a variable C<name> whose value is the result of
 evaluating C<expr>.
 
 If C<expr> evaluates to an empty nodeset, a node is created,
-equivalent to calling C<aug_set> C<expr>, C<value>.
+equivalent to calling C<aug-set> C<expr>, C<value>.
 C<name> will be the nodeset containing that single node.
 
 On success this returns a pair containing the
@@ -73,7 +73,7 @@ Create a new Augeas handle for editing configuration files.
 If there was any previous Augeas handle associated with this
 guestfs session, then it is closed.
 
-You must call this before using any other C<aug_*>
+You must call this before using any other C<aug-*>
 commands.
 
 C<root> is the filesystem root.  C<root> must not be NULL,
@@ -108,11 +108,11 @@ Make save a no-op, just record what would have been changed.
 
 =item C<AUG_NO_LOAD> = 32
 
-Do not load the tree in C<aug_init>.
+Do not load the tree in C<aug-init>.
 
 =back
 
-To close the handle, you can call C<aug_close>.
+To close the handle, you can call C<aug-close>.
 
 To find out more about Augeas, see L<http://augeas.net/>.
 
@@ -141,7 +141,7 @@ details.
 
  aug-ls path
 
-This is just a shortcut for listing C<aug_match>
+This is just a shortcut for listing C<aug-match>
 C<path/*> and sorting the resulting nodes into alphabetical order.
 
 =head2 aug-match
@@ -173,7 +173,7 @@ On success this returns the number of entries which were removed.
 
 This writes all pending changes to disk.
 
-The flags which were passed to C<aug_init> affect exactly
+The flags which were passed to C<aug-init> affect exactly
 how files are saved.
 
 =head2 aug-set
@@ -217,7 +217,7 @@ This uses the L<blockdev(8)> command.
 
 This returns the size of the device in bytes.
 
-See also C<blockdev_getsz>.
+See also C<blockdev-getsz>.
 
 This uses the L<blockdev(8)> command.
 
@@ -228,7 +228,7 @@ This uses the L<blockdev(8)> command.
 This returns the size of sectors on a block device.
 Usually 512, but can be larger for modern devices.
 
-(Note, this is not the size in sectors, use C<blockdev_getsz>
+(Note, this is not the size in sectors, use C<blockdev-getsz>
 for that).
 
 This uses the L<blockdev(8)> command.
@@ -240,8 +240,8 @@ This uses the L<blockdev(8)> command.
 This returns the size of the device in units of 512-byte sectors
 (even if the sectorsize isn't 512 bytes ... weird).
 
-See also C<blockdev_getss> for the real sector size of
-the device, and C<blockdev_getsize64> for the more
+See also C<blockdev-getss> for the real sector size of
+the device, and C<blockdev-getsize64> for the more
 useful I<size in bytes>.
 
 This uses the L<blockdev(8)> command.
@@ -360,7 +360,7 @@ yourself (Augeas support makes this relatively easy).
 
 =head2 command
 
- command arguments,...
+ command 'arguments ...'
 
 This call runs a command from the guest filesystem.  The
 filesystem must be mounted, and must contain a compatible
@@ -385,7 +385,7 @@ locations.
 
 =head2 command-lines
 
- command-lines arguments,...
+ command-lines 'arguments ...'
 
 This is the same as C<command>, but splits the
 result into a list of lines.
@@ -403,6 +403,18 @@ The first character of C<param> string must be a C<-> (dash).
 
 C<value> can be NULL.
 
+=head2 debug
+
+ debug subcmd 'extraargs ...'
+
+The C<debug> command exposes some internals of
+C<guestfsd> (the guestfs daemon) that runs inside the
+qemu subprocess.
+
+There is no comprehensive help for this command.  You have
+to look at the file C<daemon/debug.c> in the libguestfs source
+to find out what you can do.
+
 =head2 download
 
  download remotefilename (filename|-)
@@ -423,7 +435,7 @@ Use C<-> instead of a filename to read/write from stdin/stdout.
 This returns C<true> if and only if there is a file, directory
 (or anything) with the given C<path> name.
 
-See also C<is_file>, C<is_dir>, C<stat>.
+See also C<is-file>, C<is-dir>, C<stat>.
 
 =head2 file
 
@@ -627,7 +639,7 @@ of the L<lvs(8)> command.
 This returns a list of the logical volume device names
 (eg. C</dev/VolGroup00/LogVol00>).
 
-See also C<lvs_full>.
+See also C<lvs-full>.
 
 =head2 lvs-full
 
@@ -678,6 +690,29 @@ on the underlying device.
 The filesystem options C<sync> and C<noatime> are set with this
 call, in order to improve reliability.
 
+=head2 mount-options
+
+ mount-options options device mountpoint
+
+This is the same as the C<mount> command, but it
+allows you to set the mount options as for the
+L<mount(8)> I<-o> flag.
+
+=head2 mount-ro
+
+ mount-ro device mountpoint
+
+This is the same as the C<mount> command, but it
+mounts the filesystem with the read-only (I<-o ro>) flag.
+
+=head2 mount-vfs
+
+ mount-vfs options vfstype device mountpoint
+
+This is the same as the C<mount> command, but it
+allows you to set both the mount options and the vfstype
+as for the L<mount(8)> I<-o> and I<-t> flags.
+
 =head2 mounts
 
  mounts
@@ -705,7 +740,7 @@ of the L<pvs(8)> command.
 This returns a list of just the device names that contain
 PVs (eg. C</dev/sda2>).
 
-See also C<pvs_full>.
+See also C<pvs-full>.
 
 =head2 pvs-full
 
@@ -725,7 +760,7 @@ C<LF> and C<CRLF> character sequences are I<not> returned.
 
 Note that this function cannot correctly handle binary files
 (specifically, files containing C<\0> character which is treated
-as end of line).  For those you need to use the C<read_file>
+as end of line).  For those you need to use the C<read-file>
 function which has a more complex interface.
 
 =head2 rm
@@ -798,7 +833,7 @@ C<LIBGUESTFS_DEBUG> is defined and set to C<1>.
 
 =head2 sfdisk
 
- sfdisk device cyls heads sectors lines,...
+ sfdisk device cyls heads sectors 'lines ...'
 
 This is a direct interface to the L<sfdisk(8)> program for creating
 partitions on block devices.
@@ -858,7 +893,7 @@ closing the handle.
 This command uploads and unpacks local file C<tarfile> (an
 I<uncompressed> tar file) into C<directory>.
 
-To upload a compressed tarball, use C<tgz_in>.
+To upload a compressed tarball, use C<tgz-in>.
 
 Use C<-> instead of a filename to read/write from stdin/stdout.
 
@@ -869,7 +904,7 @@ Use C<-> instead of a filename to read/write from stdin/stdout.
 This command packs the contents of C<directory> and downloads
 it to local file C<tarfile>.
 
-To download a compressed tarball, use C<tgz_out>.
+To download a compressed tarball, use C<tgz-out>.
 
 Use C<-> instead of a filename to read/write from stdin/stdout.
 
@@ -880,7 +915,7 @@ Use C<-> instead of a filename to read/write from stdin/stdout.
 This command uploads and unpacks local file C<tarball> (a
 I<gzip compressed> tar file) into C<directory>.
 
-To upload an uncompressed tarball, use C<tar_in>.
+To upload an uncompressed tarball, use C<tar-in>.
 
 Use C<-> instead of a filename to read/write from stdin/stdout.
 
@@ -891,7 +926,7 @@ Use C<-> instead of a filename to read/write from stdin/stdout.
 This command packs the contents of C<directory> and downloads
 it to local file C<tarball>.
 
-To download an uncompressed tarball, use C<tar_out>.
+To download an uncompressed tarball, use C<tar-out>.
 
 Use C<-> instead of a filename to read/write from stdin/stdout.
 
@@ -946,7 +981,7 @@ Use C<-> instead of a filename to read/write from stdin/stdout.
 
 =head2 vgcreate
 
- vgcreate volgroup physvols,...
+ vgcreate volgroup 'physvols ...'
 
 This creates an LVM volume group called C<volgroup>
 from the non-empty list of physical volumes C<physvols>.
@@ -961,7 +996,7 @@ of the L<vgs(8)> command.
 This returns a list of just the volume group names that were
 detected (eg. C<VolGroup00>).
 
-See also C<vgs_full>.
+See also C<vgs-full>.
 
 =head2 vgs-full