X-Git-Url: http://git.annexia.org/?p=libguestfs.git;a=blobdiff_plain;f=guestfish-actions.pod;h=8ced2e14f8e96609f7110fcde5e77d470c4b8a67;hp=74242e32aa9390c4372dc796d1e154fca503e807;hb=0884d8bbae6d76a603ec1385ada2938f88981c5c;hpb=e118c14b9552de311cbc1734e03a3226b484c1e8

diff --git a/guestfish-actions.pod b/guestfish-actions.pod
index 74242e3..8ced2e1 100644
--- a/guestfish-actions.pod
+++ b/guestfish-actions.pod
@@ -6,6 +6,11 @@ This function adds a virtual CD-ROM disk image to the guest.
 
 This is equivalent to the qemu parameter C<-cdrom filename>.
 
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<config> call instead.
+
 =head2 add-drive | add
 
  add-drive filename
@@ -21,7 +26,33 @@ for whatever operations you want to perform (ie. read access if you
 just want to read the image or write access if you want to modify the
 image).
 
-This is equivalent to the qemu parameter C<-drive file=filename>.
+This is equivalent to the qemu parameter C<-drive file=filename,cache=off>.
+
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<config> call instead.
+
+=head2 add-drive-ro | add-ro
+
+ add-drive-ro filename
+
+This adds a drive in snapshot mode, making it effectively
+read-only.
+
+Note that writes to the device are allowed, and will be seen for
+the duration of the guestfs handle, but they are written
+to a temporary file which is discarded as soon as the guestfs
+handle is closed.  We don't currently have any method to enable
+changes to be committed, although qemu can support this.
+
+This is equivalent to the qemu parameter
+C<-drive file=filename,snapshot=on>.
+
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<config> call instead.
 
 =head2 aug-close
 
@@ -370,7 +401,16 @@ or compatible processor architecture).
 The single parameter is an argv-style list of arguments.
 The first element is the name of the program to run.
 Subsequent elements are parameters.  The list must be
-non-empty (ie. must contain a program name).
+non-empty (ie. must contain a program name).  Note that
+the command runs directly, and is I<not> invoked via
+the shell (see C<sh>).
+
+The return value is anything printed to I<stdout> by
+the command.
+
+If the command returns a non-zero exit status, then
+this function returns an error message.  The error message
+string is the content of I<stderr> from the command.
 
 The C<$PATH> environment variable will contain at least
 C</usr/bin> and C</bin>.  If you require a program from
@@ -383,6 +423,10 @@ correct places.  It is the caller's responsibility to ensure
 all filesystems that are needed are mounted at the right
 locations.
 
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
 =head2 command-lines
 
  command-lines 'arguments ...'
@@ -390,6 +434,12 @@ locations.
 This is the same as C<command>, but splits the
 result into a list of lines.
 
+See also: C<sh-lines>
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
 =head2 config
 
  config qemuparam qemuvalue
@@ -403,6 +453,20 @@ The first character of C<param> string must be a C<-> (dash).
 
 C<value> can be NULL.
 
+=head2 cp
+
+ cp src dest
+
+This copies a file from C<src> to C<dest> where C<dest> is
+either a destination filename or destination directory.
+
+=head2 cp-a
+
+ cp-a src dest
+
+This copies a file or directory from C<src> to C<dest>
+recursively using the C<cp -a> command.
+
 =head2 debug
 
  debug subcmd 'extraargs ...'
@@ -415,6 +479,40 @@ There is no comprehensive help for this command.  You have
 to look at the file C<daemon/debug.c> in the libguestfs source
 to find out what you can do.
 
+=head2 df
+
+ df
+
+This command runs the C<df> command to report disk space used.
+
+This command is mostly useful for interactive sessions.  It
+is I<not> intended that you try to parse the output string.
+Use C<statvfs> from programs.
+
+=head2 df-h
+
+ df-h
+
+This command runs the C<df -h> command to report disk space used
+in human-readable format.
+
+This command is mostly useful for interactive sessions.  It
+is I<not> intended that you try to parse the output string.
+Use C<statvfs> from programs.
+
+=head2 dmesg
+
+ dmesg
+
+This returns the kernel messages (C<dmesg> output) from
+the guest kernel.  This is sometimes useful for extended
+debugging of problems.
+
+Another way to get the same information is to enable
+verbose messages with C<set-verbose> or by setting
+the environment variable C<LIBGUESTFS_DEBUG=1> before
+running the program.
+
 =head2 download
 
  download remotefilename (filename|-)
@@ -428,6 +526,54 @@ See also C<upload>, C<cat>.
 
 Use C<-> instead of a filename to read/write from stdin/stdout.
 
+=head2 drop-caches
+
+ drop-caches whattodrop
+
+This instructs the guest kernel to drop its page cache,
+and/or dentries and inode caches.  The parameter C<whattodrop>
+tells the kernel what precisely to drop, see
+L<http://linux-mm.org/Drop_Caches>
+
+Setting C<whattodrop> to 3 should drop everything.
+
+This automatically calls L<sync(2)> before the operation,
+so that the maximum guest memory is freed.
+
+=head2 du
+
+ du path
+
+This command runs the C<du -s> command to estimate file space
+usage for C<path>.
+
+C<path> can be a file or a directory.  If C<path> is a directory
+then the estimate includes the contents of the directory and all
+subdirectories (recursively).
+
+The result is the estimated size in I<kilobytes>
+(ie. units of 1024 bytes).
+
+=head2 e2fsck-f
+
+ e2fsck-f device
+
+This runs C<e2fsck -p -f device>, ie. runs the ext2/ext3
+filesystem checker on C<device>, noninteractively (C<-p>),
+even if the filesystem appears to be clean (C<-f>).
+
+This command is only needed because of C<resize2fs>
+(q.v.).  Normally you should use C<fsck>.
+
+=head2 equal
+
+ equal file1 file2
+
+This compares the two files C<file1> and C<file2> and returns
+true if their content is exactly equal, or false otherwise.
+
+The external L<cmp(1)> program is used for the comparison.
+
 =head2 exists
 
  exists path
@@ -449,6 +595,35 @@ The exact command which runs is C<file -bsL path>.  Note in
 particular that the filename is not prepended to the output
 (the C<-b> option).
 
+=head2 find
+
+ find directory
+
+This command lists out all files and directories, recursively,
+starting at C<directory>.  It is essentially equivalent to
+running the shell command C<find directory -print> but some
+post-processing happens on the output, described below.
+
+This returns a list of strings I<without any prefix>.  Thus
+if the directory structure was:
+
+ /tmp/a
+ /tmp/b
+ /tmp/c/d
+
+then the returned list from C<find> C</tmp> would be
+4 elements:
+
+ a
+ b
+ c
+ c/d
+
+If C<directory> is not a directory, then this command returns
+an error.
+
+The returned list is sorted.
+
 =head2 fsck
 
  fsck fstype device
@@ -481,6 +656,15 @@ Checking or repairing NTFS volumes is not supported
 
 This command is entirely equivalent to running C<fsck -a -t fstype device>.
 
+=head2 get-append
+
+ get-append
+
+Return the additional kernel options which are added to the
+guest kernel command line.
+
+If C<NULL> then no options are added.
+
 =head2 get-autosync
 
  get-autosync
@@ -501,6 +685,20 @@ C<device>.
 This returns the ext2/3/4 filesystem UUID of the filesystem on
 C<device>.
 
+=head2 get-memsize
+
+ get-memsize
+
+This gets the memory size in megabytes allocated to the
+qemu subprocess.
+
+If C<set-memsize> was not called
+on this handle, and if C<LIBGUESTFS_MEMSIZE> was not set,
+then this returns the compiled-in default value for memsize.
+
+For more information on the architecture of libguestfs,
+see L<guestfs(3)>.
+
 =head2 get-path
 
  get-path
@@ -534,6 +732,21 @@ For more information on states, see L<guestfs(3)>.
 
 This returns the verbose messages flag.
 
+=head2 glob-expand
+
+ glob-expand pattern
+
+This command searches for all the pathnames matching
+C<pattern> according to the wildcard expansion rules
+used by the shell.
+
+If no paths match, then this returns an empty list
+(note: not an error).
+
+It is just a wrapper around the C L<glob(3)> function
+with flags C<GLOB_MARK|GLOB_BRACE>.
+See that manual page for more details.
+
 =head2 grub-install
 
  grub-install root device
@@ -541,6 +754,58 @@ This returns the verbose messages flag.
 This command installs GRUB (the Grand Unified Bootloader) on
 C<device>, with the root directory being C<root>.
 
+=head2 head
+
+ head path
+
+This command returns up to the first 10 lines of a file as
+a list of strings.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=head2 head-n
+
+ head-n nrlines path
+
+If the parameter C<nrlines> is a positive number, this returns the first
+C<nrlines> lines of the file C<path>.
+
+If the parameter C<nrlines> is a negative number, this returns lines
+from the file C<path>, excluding the last C<nrlines> lines.
+
+If the parameter C<nrlines> is zero, this returns an empty list.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=head2 hexdump
+
+ hexdump path
+
+This runs C<hexdump -C> on the given C<path>.  The result is
+the human-readable, canonical hex dump of the file.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=head2 initrd-list
+
+ initrd-list path
+
+This command lists out files contained in an initrd.
+
+The files are listed without any initial C</> character.  The
+files are listed in the order they appear (not necessarily
+alphabetical).  Directory names are listed as separate items.
+
+Old Linux kernels (2.4 and earlier) used a compressed ext2
+filesystem as initrd.  We I<only> support the newer initramfs
+format (compressed cpio files).
+
 =head2 is-busy
 
  is-busy
@@ -692,6 +957,14 @@ the path to the LV, such as C</dev/VG/LV>.
 You can also remove all LVs in a volume group by specifying
 the VG name, C</dev/VG>.
 
+=head2 lvresize
+
+ lvresize device mbytes
+
+This resizes (expands or shrinks) an existing LVM logical
+volume to C<mbytes>.  When reducing, data in the reduced part
+is lost.
+
 =head2 lvs
 
  lvs
@@ -724,14 +997,91 @@ Create a directory named C<path>.
 Create a directory named C<path>, creating any parent directories
 as necessary.  This is like the C<mkdir -p> shell command.
 
+=head2 mkdtemp
+
+ mkdtemp template
+
+This command creates a temporary directory.  The
+C<template> parameter should be a full pathname for the
+temporary directory name with the final six characters being
+"XXXXXX".
+
+For example: "/tmp/myprogXXXXXX" or "/Temp/myprogXXXXXX",
+the second one being suitable for Windows filesystems.
+
+The name of the temporary directory that was created
+is returned.
+
+The temporary directory is created with mode 0700
+and is owned by root.
+
+The caller is responsible for deleting the temporary
+directory and its contents after use.
+
+See also: L<mkdtemp(3)>
+
+=head2 mkfifo
+
+ mkfifo mode path
+
+This call creates a FIFO (named pipe) called C<path> with
+mode C<mode>.  It is just a convenient wrapper around
+C<mknod>.
+
 =head2 mkfs
 
  mkfs fstype device
 
 This creates a filesystem on C<device> (usually a partition
-of LVM logical volume).  The filesystem type is C<fstype>, for
+or LVM logical volume).  The filesystem type is C<fstype>, for
 example C<ext3>.
 
+=head2 mknod
+
+ mknod mode devmajor devminor path
+
+This call creates block or character special devices, or
+named pipes (FIFOs).
+
+The C<mode> parameter should be the mode, using the standard
+constants.  C<devmajor> and C<devminor> are the
+device major and minor numbers, only used when creating block
+and character special devices.
+
+=head2 mknod-b
+
+ mknod-b mode devmajor devminor path
+
+This call creates a block device node called C<path> with
+mode C<mode> and device major/minor C<devmajor> and C<devminor>.
+It is just a convenient wrapper around C<mknod>.
+
+=head2 mknod-c
+
+ mknod-c mode devmajor devminor path
+
+This call creates a char device node called C<path> with
+mode C<mode> and device major/minor C<devmajor> and C<devminor>.
+It is just a convenient wrapper around C<mknod>.
+
+=head2 mkswap
+
+ mkswap device
+
+Create a swap partition on C<device>.
+
+=head2 mkswap-L
+
+ mkswap-L label device
+
+Create a swap partition on C<device> with label C<label>.
+
+=head2 mkswap-U
+
+ mkswap-U uuid device
+
+Create a swap partition on C<device> with UUID C<uuid>.
+
 =head2 mount
 
  mount device mountpoint
@@ -753,6 +1103,14 @@ on the underlying device.
 The filesystem options C<sync> and C<noatime> are set with this
 call, in order to improve reliability.
 
+=head2 mount-loop
+
+ mount-loop file mountpoint
+
+This command lets you mount C<file> (a filesystem image
+in a file) on a mount point.  It is entirely equivalent to
+the command C<mount -o loop file mountpoint>.
+
 =head2 mount-options
 
  mount-options options device mountpoint
@@ -785,6 +1143,38 @@ the list of devices (eg. C</dev/sda1>, C</dev/VG/LV>).
 
 Some internal mounts are not shown.
 
+=head2 mv
+
+ mv src dest
+
+This moves a file from C<src> to C<dest> where C<dest> is
+either a destination filename or destination directory.
+
+=head2 ntfs-3g-probe
+
+ ntfs-3g-probe true|false device
+
+This command runs the L<ntfs-3g.probe(8)> command which probes
+an NTFS C<device> for mountability.  (Not all NTFS volumes can
+be mounted read-write, and some cannot be mounted at all).
+
+C<rw> is a boolean flag.  Set it to true if you want to test
+if the volume can be mounted read-write.  Set it to false if
+you want to test if the volume can be mounted read-only.
+
+The return value is an integer which C<0> if the operation
+would succeed, or some non-zero value documented in the
+L<ntfs-3g.probe(8)> manual page.
+
+=head2 ping-daemon
+
+ ping-daemon
+
+This is a test probe into the guestfs daemon running inside
+the qemu subprocess.  Calling this function checks that the
+daemon responds to the ping message, without affecting the daemon
+or attached block device(s) in any other way.
+
 =head2 pvcreate
 
  pvcreate device
@@ -804,6 +1194,13 @@ The implementation uses the C<pvremove> command which refuses to
 wipe physical volumes that contain any volume groups, so you have
 to remove those first.
 
+=head2 pvresize
+
+ pvresize device
+
+This resizes (expands or shrinks) an existing LVM physical
+volume to match the new size of the underlying device.
+
 =head2 pvs
 
  pvs
@@ -837,6 +1234,19 @@ Note that this function cannot correctly handle binary files
 as end of line).  For those you need to use the C<read-file>
 function which has a more complex interface.
 
+=head2 resize2fs
+
+ resize2fs device
+
+This resizes an ext2 or ext3 filesystem to match the size of
+the underlying device.
+
+I<Note:> It is sometimes required that you run C<e2fsck-f>
+on the C<device> before calling this command.  For unknown reasons
+C<resize2fs> sometimes gives an error about this and sometimes not.
+In any case, it is always safe to call C<e2fsck-f> before
+calling this function.
+
 =head2 rm
 
  rm path
@@ -857,6 +1267,57 @@ command.
 
 Remove the single directory C<path>.
 
+=head2 scrub-device
+
+ scrub-device device
+
+This command writes patterns over C<device> to make data retrieval
+more difficult.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=head2 scrub-file
+
+ scrub-file file
+
+This command writes patterns over a file to make data retrieval
+more difficult.
+
+The file is I<removed> after scrubbing.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+=head2 scrub-freespace
+
+ scrub-freespace dir
+
+This command creates the directory C<dir> and then fills it
+with files until the filesystem is full, and scrubs the files
+as for C<scrub-file>, and deletes them.
+The intention is to scrub any free space on the partition
+containing C<dir>.
+
+It is an interface to the L<scrub(1)> program.  See that
+manual page for more details.
+
+=head2 set-append | append
+
+ set-append append
+
+This function is used to add additional options to the
+guest kernel command line.
+
+The default is C<NULL> unless overridden by setting
+C<LIBGUESTFS_APPEND> environment variable.
+
+Setting C<append> to C<NULL> means I<no> additional options
+are passed (libguestfs always adds a few of its own).
+
 =head2 set-autosync | autosync
 
  set-autosync true|false
@@ -892,6 +1353,21 @@ L<tune2fs(8)> manpage.
 You can use either C<tune2fs-l> or C<get-e2uuid>
 to return the existing UUID of a filesystem.
 
+=head2 set-memsize | memsize
+
+ set-memsize memsize
+
+This sets the memory size in megabytes allocated to the
+qemu subprocess.  This only has any effect if called before
+C<launch>.
+
+You can also change this by setting the environment
+variable C<LIBGUESTFS_MEMSIZE> before the handle is
+created.
+
+For more information on the architecture of libguestfs,
+see L<guestfs(3)>.
+
 =head2 set-path | path
 
  set-path path
@@ -901,9 +1377,6 @@ Set the path that libguestfs searches for kernel and initrd.img.
 The default is C<$libdir/guestfs> unless overridden by setting
 C<LIBGUESTFS_PATH> environment variable.
 
-The string C<path> is stashed in the libguestfs handle, so the caller
-must make sure it remains valid for the lifetime of the handle.
-
 Setting C<path> to C<NULL> restores the default path.
 
 =head2 set-qemu | qemu
@@ -918,9 +1391,6 @@ configure script.
 You can also override this by setting the C<LIBGUESTFS_QEMU>
 environment variable.
 
-The string C<qemu> is stashed in the libguestfs handle, so the caller
-must make sure it remains valid for the lifetime of the handle.
-
 Setting C<qemu> to C<NULL> restores the default qemu binary.
 
 =head2 set-verbose | verbose
@@ -956,9 +1426,85 @@ To create a single partition occupying the whole disk, you would
 pass C<lines> as a single element list, when the single element being
 the string C<,> (comma).
 
+See also: C<sfdisk-l>, C<sfdisk-N>
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=head2 sfdisk-N
+
+ sfdisk-N device partnum cyls heads sectors line
+
+This runs L<sfdisk(8)> option to modify just the single
+partition C<n> (note: C<n> counts from 1).
+
+For other parameters, see C<sfdisk>.  You should usually
+pass C<0> for the cyls/heads/sectors parameters.
+
 B<This command is dangerous.  Without careful use you
 can easily destroy all your data>.
 
+=head2 sfdisk-disk-geometry
+
+ sfdisk-disk-geometry device
+
+This displays the disk geometry of C<device> read from the
+partition table.  Especially in the case where the underlying
+block device has been resized, this can be different from the
+kernel's idea of the geometry (see C<sfdisk-kernel-geometry>).
+
+The result is in human-readable format, and not designed to
+be parsed.
+
+=head2 sfdisk-kernel-geometry
+
+ sfdisk-kernel-geometry device
+
+This displays the kernel's idea of the geometry of C<device>.
+
+The result is in human-readable format, and not designed to
+be parsed.
+
+=head2 sfdisk-l
+
+ sfdisk-l device
+
+This displays the partition table on C<device>, in the
+human-readable output of the L<sfdisk(8)> command.  It is
+not intended to be parsed.
+
+=head2 sh
+
+ sh command
+
+This call runs a command from the guest filesystem via the
+guest's C</bin/sh>.
+
+This is like C<command>, but passes the command to:
+
+ /bin/sh -c "command"
+
+Depending on the guest's shell, this usually results in
+wildcards being expanded, shell expressions being interpolated
+and so on.
+
+All the provisos about C<command> apply to this call.
+
+=head2 sh-lines
+
+ sh-lines command
+
+This is the same as C<sh>, but splits the result
+into a list of lines.
+
+See also: C<command-lines>
+
+=head2 sleep
+
+ sleep secs
+
+Sleep for C<secs> seconds.
+
 =head2 stat
 
  stat path
@@ -977,6 +1523,35 @@ C<path> should be a file or directory in the mounted file system
 
 This is the same as the C<statvfs(2)> system call.
 
+=head2 strings
+
+ strings path
+
+This runs the L<strings(1)> command on a file and returns
+the list of printable strings found.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=head2 strings-e
+
+ strings-e encoding path
+
+This is like the C<strings> command, but allows you to
+specify the encoding.
+
+See the L<strings(1)> manpage for the full list of encodings.
+
+Commonly useful encodings are C<l> (lower case L) which will
+show strings inside Windows/x86 files.
+
+The returned strings are transcoded to UTF-8.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
 =head2 sync
 
  sync
@@ -987,6 +1562,33 @@ underlying disk image.
 You should always call this if you have modified a disk image, before
 closing the handle.
 
+=head2 tail
+
+ tail path
+
+This command returns up to the last 10 lines of a file as
+a list of strings.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=head2 tail-n
+
+ tail-n nrlines path
+
+If the parameter C<nrlines> is a positive number, this returns the last
+C<nrlines> lines of the file C<path>.
+
+If the parameter C<nrlines> is a negative number, this returns lines
+from the file C<path>, starting with the C<-nrlines>th line.
+
+If the parameter C<nrlines> is zero, this returns an empty list.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
 =head2 tar-in
 
  tar-in (tarfile|-) directory
@@ -1051,6 +1653,22 @@ manpage for more details.  The list of fields returned isn't
 clearly defined, and depends on both the version of C<tune2fs>
 that libguestfs was built against, and the filesystem itself.
 
+=head2 umask
+
+ umask mask
+
+This function sets the mask used for creating new files and
+device nodes to C<mask & 0777>.
+
+Typical umask values would be C<022> which creates new files
+with permissions like "-rw-r--r--" or "-rwxr-xr-x", and
+C<002> which creates new files with permissions like
+"-rw-rw-r--" or "-rwxrwxr-x".
+
+See also L<umask(2)>, C<mknod>, C<mkdir>.
+
+This call returns the previous umask.
+
 =head2 umount | unmount
 
  umount pathordevice
@@ -1080,6 +1698,33 @@ See also C<download>.
 
 Use C<-> instead of a filename to read/write from stdin/stdout.
 
+=head2 vg-activate
+
+ vg-activate true|false 'volgroups ...'
+
+This command activates or (if C<activate> is false) deactivates
+all logical volumes in the listed volume groups C<volgroups>.
+If activated, then they are made known to the
+kernel, ie. they appear as C</dev/mapper> devices.  If deactivated,
+then those devices disappear.
+
+This command is the same as running C<vgchange -a y|n volgroups...>
+
+Note that if C<volgroups> is an empty list then B<all> volume groups
+are activated or deactivated.
+
+=head2 vg-activate-all
+
+ vg-activate-all true|false
+
+This command activates or (if C<activate> is false) deactivates
+all logical volumes in all volume groups.
+If activated, then they are made known to the
+kernel, ie. they appear as C</dev/mapper> devices.  If deactivated,
+then those devices disappear.
+
+This command is the same as running C<vgchange -a y|n>
+
 =head2 vgcreate
 
  vgcreate volgroup 'physvols ...'
@@ -1115,6 +1760,27 @@ See also C<vgs-full>.
 List all the volumes groups detected.  This is the equivalent
 of the L<vgs(8)> command.  The "full" version includes all fields.
 
+=head2 wc-c
+
+ wc-c path
+
+This command counts the characters in a file, using the
+C<wc -c> external command.
+
+=head2 wc-l
+
+ wc-l path
+
+This command counts the lines in a file, using the
+C<wc -l> external command.
+
+=head2 wc-w
+
+ wc-w path
+
+This command counts the words in a file, using the
+C<wc -w> external command.
+
 =head2 write-file
 
  write-file path content size
@@ -1127,6 +1793,11 @@ As a special case, if C<size> is C<0>
 then the length is calculated using C<strlen> (so in this case
 the content cannot contain embedded ASCII NULs).
 
+I<NB.> Owing to a bug, writing content containing ASCII NUL
+characters does I<not> work, even if the length is specified.
+We hope to resolve this bug in a future version.  In the meantime
+use C<upload>.
+
 Because of the message protocol, there is a transfer limit 
 of somewhere between 2MB and 4MB.  To transfer large files you should use
 FTP.
@@ -1141,3 +1812,20 @@ How many blocks are zeroed isn't specified (but it's I<not> enough
 to securely wipe the device).  It should be sufficient to remove
 any partition tables, filesystem superblocks and so on.
 
+See also: C<scrub-device>.
+
+=head2 zerofree
+
+ zerofree device
+
+This runs the I<zerofree> program on C<device>.  This program
+claims to zero unused inodes and disk blocks on an ext2/3
+filesystem, thus making it possible to compress the filesystem
+more effectively.
+
+You should B<not> run this program if the filesystem is
+mounted.
+
+It is possible that using this program can damage the filesystem
+or data on the filesystem.
+