X-Git-Url: http://git.annexia.org/?p=libguestfs.git;a=blobdiff_plain;f=guestfish-actions.pod;h=484599019cce936872ab1a64117978c13adcb0cb;hp=9146c41a00211f89dd4912a4798cdd9ae41f5fdb;hb=394c8bec21d47b74567a4148fdbf87318c301441;hpb=5d628a4a9cc11eb9a61a1dc683aadca9ac378736

diff --git a/guestfish-actions.pod b/guestfish-actions.pod
index 9146c41..4845990 100644
--- a/guestfish-actions.pod
+++ b/guestfish-actions.pod
@@ -6,6 +6,11 @@ This function adds a virtual CD-ROM disk image to the guest.
 
 This is equivalent to the qemu parameter C<-cdrom filename>.
 
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<config> call instead.
+
 =head2 add-drive | add
 
  add-drive filename
@@ -23,6 +28,32 @@ image).
 
 This is equivalent to the qemu parameter C<-drive file=filename>.
 
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<config> call instead.
+
+=head2 add-drive-ro | add-ro
+
+ add-drive-ro filename
+
+This adds a drive in snapshot mode, making it effectively
+read-only.
+
+Note that writes to the device are allowed, and will be seen for
+the duration of the guestfs handle, but they are written
+to a temporary file which is discarded as soon as the guestfs
+handle is closed.  We don't currently have any method to enable
+changes to be committed, although qemu can support this.
+
+This is equivalent to the qemu parameter
+C<-drive file=filename,snapshot=on>.
+
+Note that this call checks for the existence of C<filename>.  This
+stops you from specifying other types of drive which are supported
+by qemu such as C<nbd:> and C<http:> URLs.  To specify those, use
+the general C<config> call instead.
+
 =head2 aug-close
 
  aug-close
@@ -370,7 +401,9 @@ or compatible processor architecture).
 The single parameter is an argv-style list of arguments.
 The first element is the name of the program to run.
 Subsequent elements are parameters.  The list must be
-non-empty (ie. must contain a program name).
+non-empty (ie. must contain a program name).  Note that
+the command runs directly, and is I<not> invoked via
+the shell (see C<sh>).
 
 The return value is anything printed to I<stdout> by
 the command.
@@ -401,6 +434,8 @@ FTP.
 This is the same as C<command>, but splits the
 result into a list of lines.
 
+See also: C<sh-lines>
+
 Because of the message protocol, there is a transfer limit 
 of somewhere between 2MB and 4MB.  To transfer large files you should use
 FTP.
@@ -484,6 +519,17 @@ Setting C<whattodrop> to 3 should drop everything.
 This automatically calls L<sync(2)> before the operation,
 so that the maximum guest memory is freed.
 
+=head2 e2fsck-f
+
+ e2fsck-f device
+
+This runs C<e2fsck -p -f device>, ie. runs the ext2/ext3
+filesystem checker on C<device>, noninteractively (C<-p>),
+even if the filesystem appears to be clean (C<-f>).
+
+This command is only needed because of C<resize2fs>
+(q.v.).  Normally you should use C<fsck>.
+
 =head2 equal
 
  equal file1 file2
@@ -514,6 +560,35 @@ The exact command which runs is C<file -bsL path>.  Note in
 particular that the filename is not prepended to the output
 (the C<-b> option).
 
+=head2 find
+
+ find directory
+
+This command lists out all files and directories, recursively,
+starting at C<directory>.  It is essentially equivalent to
+running the shell command C<find directory -print> but some
+post-processing happens on the output, described below.
+
+This returns a list of strings I<without any prefix>.  Thus
+if the directory structure was:
+
+ /tmp/a
+ /tmp/b
+ /tmp/c/d
+
+then the returned list from C<find> C</tmp> would be
+4 elements:
+
+ a
+ b
+ c
+ c/d
+
+If C<directory> is not a directory, then this command returns
+an error.
+
+The returned list is sorted.
+
 =head2 fsck
 
  fsck fstype device
@@ -608,6 +683,21 @@ For more information on states, see L<guestfs(3)>.
 
 This returns the verbose messages flag.
 
+=head2 glob-expand
+
+ glob-expand pattern
+
+This command searches for all the pathnames matching
+C<pattern> according to the wildcard expansion rules
+used by the shell.
+
+If no paths match, then this returns an empty list
+(note: not an error).
+
+It is just a wrapper around the C L<glob(3)> function
+with flags C<GLOB_MARK|GLOB_BRACE>.
+See that manual page for more details.
+
 =head2 grub-install
 
  grub-install root device
@@ -777,6 +867,14 @@ the path to the LV, such as C</dev/VG/LV>.
 You can also remove all LVs in a volume group by specifying
 the VG name, C</dev/VG>.
 
+=head2 lvresize
+
+ lvresize device mbytes
+
+This resizes (expands or shrinks) an existing LVM logical
+volume to C<mbytes>.  When reducing, data in the reduced part
+is lost.
+
 =head2 lvs
 
  lvs
@@ -877,6 +975,22 @@ Some internal mounts are not shown.
 This moves a file from C<src> to C<dest> where C<dest> is
 either a destination filename or destination directory.
 
+=head2 ntfs-3g-probe
+
+ ntfs-3g-probe true|false device
+
+This command runs the L<ntfs-3g.probe(8)> command which probes
+an NTFS C<device> for mountability.  (Not all NTFS volumes can
+be mounted read-write, and some cannot be mounted at all).
+
+C<rw> is a boolean flag.  Set it to true if you want to test
+if the volume can be mounted read-write.  Set it to false if
+you want to test if the volume can be mounted read-only.
+
+The return value is an integer which C<0> if the operation
+would succeed, or some non-zero value documented in the
+L<ntfs-3g.probe(8)> manual page.
+
 =head2 ping-daemon
 
  ping-daemon
@@ -905,6 +1019,13 @@ The implementation uses the C<pvremove> command which refuses to
 wipe physical volumes that contain any volume groups, so you have
 to remove those first.
 
+=head2 pvresize
+
+ pvresize device
+
+This resizes (expands or shrinks) an existing LVM physical
+volume to match the new size of the underlying device.
+
 =head2 pvs
 
  pvs
@@ -938,6 +1059,19 @@ Note that this function cannot correctly handle binary files
 as end of line).  For those you need to use the C<read-file>
 function which has a more complex interface.
 
+=head2 resize2fs
+
+ resize2fs device
+
+This resizes an ext2 or ext3 filesystem to match the size of
+the underlying device.
+
+I<Note:> It is sometimes required that you run C<e2fsck-f>
+on the C<device> before calling this command.  For unknown reasons
+C<resize2fs> sometimes gives an error about this and sometimes not.
+In any case, it is always safe to call C<e2fsck-f> before
+calling this function.
+
 =head2 rm
 
  rm path
@@ -1064,9 +1198,85 @@ To create a single partition occupying the whole disk, you would
 pass C<lines> as a single element list, when the single element being
 the string C<,> (comma).
 
+See also: C<sfdisk-l>, C<sfdisk-N>
+
 B<This command is dangerous.  Without careful use you
 can easily destroy all your data>.
 
+=head2 sfdisk-N
+
+ sfdisk-N device n cyls heads sectors line
+
+This runs L<sfdisk(8)> option to modify just the single
+partition C<n> (note: C<n> counts from 1).
+
+For other parameters, see C<sfdisk>.  You should usually
+pass C<0> for the cyls/heads/sectors parameters.
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=head2 sfdisk-disk-geometry
+
+ sfdisk-disk-geometry device
+
+This displays the disk geometry of C<device> read from the
+partition table.  Especially in the case where the underlying
+block device has been resized, this can be different from the
+kernel's idea of the geometry (see C<sfdisk-kernel-geometry>).
+
+The result is in human-readable format, and not designed to
+be parsed.
+
+=head2 sfdisk-kernel-geometry
+
+ sfdisk-kernel-geometry device
+
+This displays the kernel's idea of the geometry of C<device>.
+
+The result is in human-readable format, and not designed to
+be parsed.
+
+=head2 sfdisk-l
+
+ sfdisk-l device
+
+This displays the partition table on C<device>, in the
+human-readable output of the L<sfdisk(8)> command.  It is
+not intended to be parsed.
+
+=head2 sh
+
+ sh command
+
+This call runs a command from the guest filesystem via the
+guest's C</bin/sh>.
+
+This is like C<command>, but passes the command to:
+
+ /bin/sh -c "command"
+
+Depending on the guest's shell, this usually results in
+wildcards being expanded, shell expressions being interpolated
+and so on.
+
+All the provisos about C<command> apply to this call.
+
+=head2 sh-lines
+
+ sh-lines command
+
+This is the same as C<sh>, but splits the result
+into a list of lines.
+
+See also: C<command-lines>
+
+=head2 sleep
+
+ sleep secs
+
+Sleep for C<secs> seconds.
+
 =head2 stat
 
  stat path
@@ -1217,6 +1427,33 @@ See also C<download>.
 
 Use C<-> instead of a filename to read/write from stdin/stdout.
 
+=head2 vg-activate
+
+ vg-activate true|false 'volgroups ...'
+
+This command activates or (if C<activate> is false) deactivates
+all logical volumes in the listed volume groups C<volgroups>.
+If activated, then they are made known to the
+kernel, ie. they appear as C</dev/mapper> devices.  If deactivated,
+then those devices disappear.
+
+This command is the same as running C<vgchange -a y|n volgroups...>
+
+Note that if C<volgroups> is an empty list then B<all> volume groups
+are activated or deactivated.
+
+=head2 vg-activate-all
+
+ vg-activate-all true|false
+
+This command activates or (if C<activate> is false) deactivates
+all logical volumes in all volume groups.
+If activated, then they are made known to the
+kernel, ie. they appear as C</dev/mapper> devices.  If deactivated,
+then those devices disappear.
+
+This command is the same as running C<vgchange -a y|n>
+
 =head2 vgcreate
 
  vgcreate volgroup 'physvols ...'
@@ -1283,3 +1520,18 @@ How many blocks are zeroed isn't specified (but it's I<not> enough
 to securely wipe the device).  It should be sufficient to remove
 any partition tables, filesystem superblocks and so on.
 
+=head2 zerofree
+
+ zerofree device
+
+This runs the I<zerofree> program on C<device>.  This program
+claims to zero unused inodes and disk blocks on an ext2/3
+filesystem, thus making it possible to compress the filesystem
+more effectively.
+
+You should B<not> run this program if the filesystem is
+mounted.
+
+It is possible that using this program can damage the filesystem
+or data on the filesystem.
+