X-Git-Url: http://git.annexia.org/?p=libguestfs.git;a=blobdiff_plain;f=guestfish-actions.pod;h=44d86f24ece5e5420fd7b71b8ab2fa463ed7f263;hp=d218e0ec9490af15d9e9551feb47786c87e83c03;hb=36f9dac1a2530b575dab9226f6ddd85e6e8c8590;hpb=233595cc4e3c3422a5f5d8aec3314029da3f0ec7

diff --git a/guestfish-actions.pod b/guestfish-actions.pod
index d218e0e..44d86f2 100644
--- a/guestfish-actions.pod
+++ b/guestfish-actions.pod
@@ -29,7 +29,7 @@ This is equivalent to the qemu parameter C<-drive file=filename>.
 
 Close the current Augeas handle and free up any resources
 used by it.  After calling this, you have to call
-C<aug_init> again before you can use any other
+C<aug-init> again before you can use any other
 Augeas functions.
 
 =head2 aug-defnode
@@ -40,7 +40,7 @@ Defines a variable C<name> whose value is the result of
 evaluating C<expr>.
 
 If C<expr> evaluates to an empty nodeset, a node is created,
-equivalent to calling C<aug_set> C<expr>, C<value>.
+equivalent to calling C<aug-set> C<expr>, C<value>.
 C<name> will be the nodeset containing that single node.
 
 On success this returns a pair containing the
@@ -73,7 +73,7 @@ Create a new Augeas handle for editing configuration files.
 If there was any previous Augeas handle associated with this
 guestfs session, then it is closed.
 
-You must call this before using any other C<aug_*>
+You must call this before using any other C<aug-*>
 commands.
 
 C<root> is the filesystem root.  C<root> must not be NULL,
@@ -108,11 +108,11 @@ Make save a no-op, just record what would have been changed.
 
 =item C<AUG_NO_LOAD> = 32
 
-Do not load the tree in C<aug_init>.
+Do not load the tree in C<aug-init>.
 
 =back
 
-To close the handle, you can call C<aug_close>.
+To close the handle, you can call C<aug-close>.
 
 To find out more about Augeas, see L<http://augeas.net/>.
 
@@ -137,6 +137,13 @@ Load files into the tree.
 See C<aug_load> in the Augeas documentation for the full gory
 details.
 
+=head2 aug-ls
+
+ aug-ls path
+
+This is just a shortcut for listing C<aug-match>
+C<path/*> and sorting the resulting nodes into alphabetical order.
+
 =head2 aug-match
 
  aug-match path
@@ -166,7 +173,7 @@ On success this returns the number of entries which were removed.
 
 This writes all pending changes to disk.
 
-The flags which were passed to C<aug_init> affect exactly
+The flags which were passed to C<aug-init> affect exactly
 how files are saved.
 
 =head2 aug-set
@@ -175,6 +182,105 @@ how files are saved.
 
 Set the value associated with C<path> to C<value>.
 
+=head2 blockdev-flushbufs
+
+ blockdev-flushbufs device
+
+This tells the kernel to flush internal buffers associated
+with C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getbsz
+
+ blockdev-getbsz device
+
+This returns the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getro
+
+ blockdev-getro device
+
+Returns a boolean indicating if the block device is read-only
+(true if read-only, false if not).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getsize64
+
+ blockdev-getsize64 device
+
+This returns the size of the device in bytes.
+
+See also C<blockdev-getsz>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getss
+
+ blockdev-getss device
+
+This returns the size of sectors on a block device.
+Usually 512, but can be larger for modern devices.
+
+(Note, this is not the size in sectors, use C<blockdev-getsz>
+for that).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-getsz
+
+ blockdev-getsz device
+
+This returns the size of the device in units of 512-byte sectors
+(even if the sectorsize isn't 512 bytes ... weird).
+
+See also C<blockdev-getss> for the real sector size of
+the device, and C<blockdev-getsize64> for the more
+useful I<size in bytes>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-rereadpt
+
+ blockdev-rereadpt device
+
+Reread the partition table on C<device>.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-setbsz
+
+ blockdev-setbsz device blocksize
+
+This sets the block size of a device.
+
+(Note this is different from both I<size in blocks> and
+I<filesystem block size>).
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-setro
+
+ blockdev-setro device
+
+Sets the block device named C<device> to read-only.
+
+This uses the L<blockdev(8)> command.
+
+=head2 blockdev-setrw
+
+ blockdev-setrw device
+
+Sets the block device named C<device> to read-write.
+
+This uses the L<blockdev(8)> command.
+
 =head2 cat
 
  cat path
@@ -183,9 +289,107 @@ Return the contents of the file named C<path>.
 
 Note that this function cannot correctly handle binary files
 (specifically, files containing C<\0> character which is treated
-as end of string).  For those you need to use the C<read_file>
+as end of string).  For those you need to use the C<download>
 function which has a more complex interface.
 
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=head2 checksum
+
+ checksum csumtype path
+
+This call computes the MD5, SHAx or CRC checksum of the
+file named C<path>.
+
+The type of checksum to compute is given by the C<csumtype>
+parameter which must have one of the following values:
+
+=over 4
+
+=item C<crc>
+
+Compute the cyclic redundancy check (CRC) specified by POSIX
+for the C<cksum> command.
+
+=item C<md5>
+
+Compute the MD5 hash (using the C<md5sum> program).
+
+=item C<sha1>
+
+Compute the SHA1 hash (using the C<sha1sum> program).
+
+=item C<sha224>
+
+Compute the SHA224 hash (using the C<sha224sum> program).
+
+=item C<sha256>
+
+Compute the SHA256 hash (using the C<sha256sum> program).
+
+=item C<sha384>
+
+Compute the SHA384 hash (using the C<sha384sum> program).
+
+=item C<sha512>
+
+Compute the SHA512 hash (using the C<sha512sum> program).
+
+=back
+
+The checksum is returned as a printable string.
+
+=head2 chmod
+
+ chmod mode path
+
+Change the mode (permissions) of C<path> to C<mode>.  Only
+numeric modes are supported.
+
+=head2 chown
+
+ chown owner group path
+
+Change the file owner to C<owner> and group to C<group>.
+
+Only numeric uid and gid are supported.  If you want to use
+names, you will need to locate and parse the password file
+yourself (Augeas support makes this relatively easy).
+
+=head2 command
+
+ command 'arguments ...'
+
+This call runs a command from the guest filesystem.  The
+filesystem must be mounted, and must contain a compatible
+operating system (ie. something Linux, with the same
+or compatible processor architecture).
+
+The single parameter is an argv-style list of arguments.
+The first element is the name of the program to run.
+Subsequent elements are parameters.  The list must be
+non-empty (ie. must contain a program name).
+
+The C<$PATH> environment variable will contain at least
+C</usr/bin> and C</bin>.  If you require a program from
+another location, you should provide the full path in the
+first parameter.
+
+Shared libraries and data files required by the program
+must be available on filesystems which are mounted in the
+correct places.  It is the caller's responsibility to ensure
+all filesystems that are needed are mounted at the right
+locations.
+
+=head2 command-lines
+
+ command-lines 'arguments ...'
+
+This is the same as C<command>, but splits the
+result into a list of lines.
+
 =head2 config
 
  config qemuparam qemuvalue
@@ -199,12 +403,104 @@ The first character of C<param> string must be a C<-> (dash).
 
 C<value> can be NULL.
 
+=head2 debug
+
+ debug subcmd 'extraargs ...'
+
+The C<debug> command exposes some internals of
+C<guestfsd> (the guestfs daemon) that runs inside the
+qemu subprocess.
+
+There is no comprehensive help for this command.  You have
+to look at the file C<daemon/debug.c> in the libguestfs source
+to find out what you can do.
+
+=head2 download
+
+ download remotefilename (filename|-)
+
+Download file C<remotefilename> and save it as C<filename>
+on the local machine.
+
+C<filename> can also be a named pipe.
+
+See also C<upload>, C<cat>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
+=head2 exists
+
+ exists path
+
+This returns C<true> if and only if there is a file, directory
+(or anything) with the given C<path> name.
+
+See also C<is-file>, C<is-dir>, C<stat>.
+
+=head2 file
+
+ file path
+
+This call uses the standard L<file(1)> command to determine
+the type or contents of the file.  This also works on devices,
+for example to find out whether a partition contains a filesystem.
+
+The exact command which runs is C<file -bsL path>.  Note in
+particular that the filename is not prepended to the output
+(the C<-b> option).
+
+=head2 fsck
+
+ fsck fstype device
+
+This runs the filesystem checker (fsck) on C<device> which
+should have filesystem type C<fstype>.
+
+The returned integer is the status.  See L<fsck(8)> for the
+list of status codes from C<fsck>.
+
+Notes:
+
+=over 4
+
+=item *
+
+Multiple status codes can be summed together.
+
+=item *
+
+A non-zero return code can mean "success", for example if
+errors have been corrected on the filesystem.
+
+=item *
+
+Checking or repairing NTFS volumes is not supported
+(by linux-ntfs).
+
+=back
+
+This command is entirely equivalent to running C<fsck -a -t fstype device>.
+
 =head2 get-autosync
 
  get-autosync
 
 Get the autosync flag.
 
+=head2 get-e2label
+
+ get-e2label device
+
+This returns the ext2/3/4 filesystem label of the filesystem on
+C<device>.
+
+=head2 get-e2uuid
+
+ get-e2uuid device
+
+This returns the ext2/3/4 filesystem UUID of the filesystem on
+C<device>.
+
 =head2 get-path
 
  get-path
@@ -214,12 +510,86 @@ Return the current search path.
 This is always non-NULL.  If it wasn't set already, then this will
 return the default path.
 
+=head2 get-qemu
+
+ get-qemu
+
+Return the current qemu binary.
+
+This is always non-NULL.  If it wasn't set already, then this will
+return the default qemu binary name.
+
+=head2 get-state
+
+ get-state
+
+This returns the current state as an opaque integer.  This is
+only useful for printing debug and internal error messages.
+
+For more information on states, see L<guestfs(3)>.
+
 =head2 get-verbose
 
  get-verbose
 
 This returns the verbose messages flag.
 
+=head2 is-busy
+
+ is-busy
+
+This returns true iff this handle is busy processing a command
+(in the C<BUSY> state).
+
+For more information on states, see L<guestfs(3)>.
+
+=head2 is-config
+
+ is-config
+
+This returns true iff this handle is being configured
+(in the C<CONFIG> state).
+
+For more information on states, see L<guestfs(3)>.
+
+=head2 is-dir
+
+ is-dir path
+
+This returns C<true> if and only if there is a directory
+with the given C<path> name.  Note that it returns false for
+other objects like files.
+
+See also C<stat>.
+
+=head2 is-file
+
+ is-file path
+
+This returns C<true> if and only if there is a file
+with the given C<path> name.  Note that it returns false for
+other objects like directories.
+
+See also C<stat>.
+
+=head2 is-launching
+
+ is-launching
+
+This returns true iff this handle is launching the subprocess
+(in the C<LAUNCHING> state).
+
+For more information on states, see L<guestfs(3)>.
+
+=head2 is-ready
+
+ is-ready
+
+This returns true iff this handle is ready to accept commands
+(in the C<READY> state).
+
+For more information on states, see L<guestfs(3)>.
+
 =head2 kill-subprocess
 
  kill-subprocess
@@ -276,6 +646,45 @@ hidden files are shown.
 This command is mostly useful for interactive sessions.  Programs
 should probably use C<readdir> instead.
 
+=head2 lstat
+
+ lstat path
+
+Returns file information for the given C<path>.
+
+This is the same as C<stat> except that if C<path>
+is a symbolic link, then the link is stat-ed, not the file it
+refers to.
+
+This is the same as the C<lstat(2)> system call.
+
+=head2 lvcreate
+
+ lvcreate logvol volgroup mbytes
+
+This creates an LVM volume group called C<logvol>
+on the volume group C<volgroup>, with C<size> megabytes.
+
+=head2 lvm-remove-all
+
+ lvm-remove-all
+
+This command removes all LVM logical volumes, volume groups
+and physical volumes.
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=head2 lvremove
+
+ lvremove device
+
+Remove an LVM logical volume C<device>, where C<device> is
+the path to the LV, such as C</dev/VG/LV>.
+
+You can also remove all LVs in a volume group by specifying
+the VG name, C</dev/VG>.
+
 =head2 lvs
 
  lvs
@@ -286,7 +695,7 @@ of the L<lvs(8)> command.
 This returns a list of the logical volume device names
 (eg. C</dev/VolGroup00/LogVol00>).
 
-See also C<lvs_full>.
+See also C<lvs-full>.
 
 =head2 lvs-full
 
@@ -295,6 +704,27 @@ See also C<lvs_full>.
 List all the logical volumes detected.  This is the equivalent
 of the L<lvs(8)> command.  The "full" version includes all fields.
 
+=head2 mkdir
+
+ mkdir path
+
+Create a directory named C<path>.
+
+=head2 mkdir-p
+
+ mkdir-p path
+
+Create a directory named C<path>, creating any parent directories
+as necessary.  This is like the C<mkdir -p> shell command.
+
+=head2 mkfs
+
+ mkfs fstype device
+
+This creates a filesystem on C<device> (usually a partition
+of LVM logical volume).  The filesystem type is C<fstype>, for
+example C<ext3>.
+
 =head2 mount
 
  mount device mountpoint
@@ -316,6 +746,57 @@ on the underlying device.
 The filesystem options C<sync> and C<noatime> are set with this
 call, in order to improve reliability.
 
+=head2 mount-options
+
+ mount-options options device mountpoint
+
+This is the same as the C<mount> command, but it
+allows you to set the mount options as for the
+L<mount(8)> I<-o> flag.
+
+=head2 mount-ro
+
+ mount-ro device mountpoint
+
+This is the same as the C<mount> command, but it
+mounts the filesystem with the read-only (I<-o ro>) flag.
+
+=head2 mount-vfs
+
+ mount-vfs options vfstype device mountpoint
+
+This is the same as the C<mount> command, but it
+allows you to set both the mount options and the vfstype
+as for the L<mount(8)> I<-o> and I<-t> flags.
+
+=head2 mounts
+
+ mounts
+
+This returns the list of currently mounted filesystems.  It returns
+the list of devices (eg. C</dev/sda1>, C</dev/VG/LV>).
+
+Some internal mounts are not shown.
+
+=head2 pvcreate
+
+ pvcreate device
+
+This creates an LVM physical volume on the named C<device>,
+where C<device> should usually be a partition name such
+as C</dev/sda1>.
+
+=head2 pvremove
+
+ pvremove device
+
+This wipes a physical volume C<device> so that LVM will no longer
+recognise it.
+
+The implementation uses the C<pvremove> command which refuses to
+wipe physical volumes that contain any volume groups, so you have
+to remove those first.
+
 =head2 pvs
 
  pvs
@@ -326,7 +807,7 @@ of the L<pvs(8)> command.
 This returns a list of just the device names that contain
 PVs (eg. C</dev/sda2>).
 
-See also C<pvs_full>.
+See also C<pvs-full>.
 
 =head2 pvs-full
 
@@ -346,17 +827,64 @@ C<LF> and C<CRLF> character sequences are I<not> returned.
 
 Note that this function cannot correctly handle binary files
 (specifically, files containing C<\0> character which is treated
-as end of line).  For those you need to use the C<read_file>
+as end of line).  For those you need to use the C<read-file>
 function which has a more complex interface.
 
+=head2 rm
+
+ rm path
+
+Remove the single file C<path>.
+
+=head2 rm-rf
+
+ rm-rf path
+
+Remove the file or directory C<path>, recursively removing the
+contents if its a directory.  This is like the C<rm -rf> shell
+command.
+
+=head2 rmdir
+
+ rmdir path
+
+Remove the single directory C<path>.
+
 =head2 set-autosync | autosync
 
  set-autosync true|false
 
 If C<autosync> is true, this enables autosync.  Libguestfs will make a
-best effort attempt to run C<sync> when the handle is closed
+best effort attempt to run C<umount-all> followed by
+C<sync> when the handle is closed
 (also if the program exits without closing handles).
 
+This is disabled by default (except in guestfish where it is
+enabled by default).
+
+=head2 set-e2label
+
+ set-e2label device label
+
+This sets the ext2/3/4 filesystem label of the filesystem on
+C<device> to C<label>.  Filesystem labels are limited to
+16 characters.
+
+You can use either C<tune2fs-l> or C<get-e2label>
+to return the existing label on a filesystem.
+
+=head2 set-e2uuid
+
+ set-e2uuid device uuid
+
+This sets the ext2/3/4 filesystem UUID of the filesystem on
+C<device> to C<uuid>.  The format of the UUID and alternatives
+such as C<clear>, C<random> and C<time> are described in the
+L<tune2fs(8)> manpage.
+
+You can use either C<tune2fs-l> or C<get-e2uuid>
+to return the existing UUID of a filesystem.
+
 =head2 set-path | path
 
  set-path path
@@ -371,6 +899,23 @@ must make sure it remains valid for the lifetime of the handle.
 
 Setting C<path> to C<NULL> restores the default path.
 
+=head2 set-qemu | qemu
+
+ set-qemu qemu
+
+Set the qemu binary that we will use.
+
+The default is chosen when the library was compiled by the
+configure script.
+
+You can also override this by setting the C<LIBGUESTFS_QEMU>
+environment variable.
+
+The string C<qemu> is stashed in the libguestfs handle, so the caller
+must make sure it remains valid for the lifetime of the handle.
+
+Setting C<qemu> to C<NULL> restores the default qemu binary.
+
 =head2 set-verbose | verbose
 
  set-verbose true|false
@@ -380,6 +925,51 @@ If C<verbose> is true, this turns on verbose messages (to C<stderr>).
 Verbose messages are disabled unless the environment variable
 C<LIBGUESTFS_DEBUG> is defined and set to C<1>.
 
+=head2 sfdisk
+
+ sfdisk device cyls heads sectors 'lines ...'
+
+This is a direct interface to the L<sfdisk(8)> program for creating
+partitions on block devices.
+
+C<device> should be a block device, for example C</dev/sda>.
+
+C<cyls>, C<heads> and C<sectors> are the number of cylinders, heads
+and sectors on the device, which are passed directly to sfdisk as
+the I<-C>, I<-H> and I<-S> parameters.  If you pass C<0> for any
+of these, then the corresponding parameter is omitted.  Usually for
+'large' disks, you can just pass C<0> for these, but for small
+(floppy-sized) disks, sfdisk (or rather, the kernel) cannot work
+out the right geometry and you will need to tell it.
+
+C<lines> is a list of lines that we feed to C<sfdisk>.  For more
+information refer to the L<sfdisk(8)> manpage.
+
+To create a single partition occupying the whole disk, you would
+pass C<lines> as a single element list, when the single element being
+the string C<,> (comma).
+
+B<This command is dangerous.  Without careful use you
+can easily destroy all your data>.
+
+=head2 stat
+
+ stat path
+
+Returns file information for the given C<path>.
+
+This is the same as the C<stat(2)> system call.
+
+=head2 statvfs
+
+ statvfs path
+
+Returns file system statistics for any mounted file system.
+C<path> should be a file or directory in the mounted file system
+(typically it is the mount point itself, but it doesn't need to be).
+
+This is the same as the C<statvfs(2)> system call.
+
 =head2 sync
 
  sync
@@ -390,6 +980,50 @@ underlying disk image.
 You should always call this if you have modified a disk image, before
 closing the handle.
 
+=head2 tar-in
+
+ tar-in (tarfile|-) directory
+
+This command uploads and unpacks local file C<tarfile> (an
+I<uncompressed> tar file) into C<directory>.
+
+To upload a compressed tarball, use C<tgz-in>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
+=head2 tar-out
+
+ tar-out directory (tarfile|-)
+
+This command packs the contents of C<directory> and downloads
+it to local file C<tarfile>.
+
+To download a compressed tarball, use C<tgz-out>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
+=head2 tgz-in
+
+ tgz-in (tarball|-) directory
+
+This command uploads and unpacks local file C<tarball> (a
+I<gzip compressed> tar file) into C<directory>.
+
+To upload an uncompressed tarball, use C<tar-in>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
+=head2 tgz-out
+
+ tgz-out directory (tarball|-)
+
+This command packs the contents of C<directory> and downloads
+it to local file C<tarball>.
+
+To download an uncompressed tarball, use C<tar-out>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
 =head2 touch
 
  touch path
@@ -398,6 +1032,63 @@ Touch acts like the L<touch(1)> command.  It can be used to
 update the timestamps on a file, or, if the file does not exist,
 to create a new zero-length file.
 
+=head2 tune2fs-l
+
+ tune2fs-l device
+
+This returns the contents of the ext2, ext3 or ext4 filesystem
+superblock on C<device>.
+
+It is the same as running C<tune2fs -l device>.  See L<tune2fs(8)>
+manpage for more details.  The list of fields returned isn't
+clearly defined, and depends on both the version of C<tune2fs>
+that libguestfs was built against, and the filesystem itself.
+
+=head2 umount | unmount
+
+ umount pathordevice
+
+This unmounts the given filesystem.  The filesystem may be
+specified either by its mountpoint (path) or the device which
+contains the filesystem.
+
+=head2 umount-all | unmount-all
+
+ umount-all
+
+This unmounts all mounted filesystems.
+
+Some internal mounts are not unmounted by this call.
+
+=head2 upload
+
+ upload (filename|-) remotefilename
+
+Upload local file C<filename> to C<remotefilename> on the
+filesystem.
+
+C<filename> can also be a named pipe.
+
+See also C<download>.
+
+Use C<-> instead of a filename to read/write from stdin/stdout.
+
+=head2 vgcreate
+
+ vgcreate volgroup 'physvols ...'
+
+This creates an LVM volume group called C<volgroup>
+from the non-empty list of physical volumes C<physvols>.
+
+=head2 vgremove
+
+ vgremove vgname
+
+Remove an LVM volume group C<vgname>, (for example C<VG>).
+
+This also forcibly removes all logical volumes in the volume
+group (if any).
+
 =head2 vgs
 
  vgs
@@ -408,7 +1099,7 @@ of the L<vgs(8)> command.
 This returns a list of just the volume group names that were
 detected (eg. C<VolGroup00>).
 
-See also C<vgs_full>.
+See also C<vgs-full>.
 
 =head2 vgs-full
 
@@ -417,3 +1108,29 @@ See also C<vgs_full>.
 List all the volumes groups detected.  This is the equivalent
 of the L<vgs(8)> command.  The "full" version includes all fields.
 
+=head2 write-file
+
+ write-file path content size
+
+This call creates a file called C<path>.  The contents of the
+file is the string C<content> (which can contain any 8 bit data),
+with length C<size>.
+
+As a special case, if C<size> is C<0>
+then the length is calculated using C<strlen> (so in this case
+the content cannot contain embedded ASCII NULs).
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=head2 zero
+
+ zero device
+
+This command writes zeroes over the first few blocks of C<device>.
+
+How many blocks are zeroed isn't specified (but it's I<not> enough
+to securely wipe the device).  It should be sufficient to remove
+any partition tables, filesystem superblocks and so on.
+