"set autosync mode",
"\
If C<autosync> is true, this enables autosync. Libguestfs will make a
-best effort attempt to run C<guestfs_sync> when the handle is closed
-(also if the program exits without closing handles).");
+best effort attempt to run C<guestfs_umount_all> followed by
+C<guestfs_sync> when the handle is closed
+(also if the program exits without closing handles).
+
+This is disabled by default (except in guestfish where it is
+enabled by default).");
("get_autosync", (RBool "autosync", []), -1, [],
[],
("umount_all", (RErr, []), 47, [FishAlias "unmount-all"],
[InitBasicFS, TestOutputList (
[["umount_all"];
+ ["mounts"]], []);
+ (* check that umount_all can unmount nested mounts correctly: *)
+ InitEmpty, TestOutputList (
+ [["sfdisk"; "/dev/sda"; "0"; "0"; "0"; ",10 ,20 ,"];
+ ["mkfs"; "ext2"; "/dev/sda1"];
+ ["mkfs"; "ext2"; "/dev/sda2"];
+ ["mkfs"; "ext2"; "/dev/sda3"];
+ ["mount"; "/dev/sda1"; "/"];
+ ["mkdir"; "/mp1"];
+ ["mount"; "/dev/sda2"; "/mp1"];
+ ["mkdir"; "/mp1/mp2"];
+ ["mount"; "/dev/sda3"; "/mp1/mp2"];
+ ["mkdir"; "/mp1/mp2/mp3"];
+ ["umount_all"];
["mounts"]], [])],
"unmount all filesystems",
"\
("tune2fs_l", (RHashtable "superblock", [String "device"]), 55, [],
[], (* XXX test *)
- "get ext2/ext3 superblock details",
+ "get ext2/ext3/ext4 superblock details",
"\
-This returns the contents of the ext2 or ext3 filesystem superblock
-on C<device>.
+This returns the contents of the ext2, ext3 or ext4 filesystem
+superblock on C<device>.
It is the same as running C<tune2fs -l device>. See L<tune2fs(8)>
manpage for more details. The list of fields returned isn't
to look at the file C<daemon/debug.c> in the libguestfs source
to find out what you can do.");
+ ("lvremove", (RErr, [String "device"]), 77, [],
+ [InitEmpty, TestOutputList (
+ [["pvcreate"; "/dev/sda"];
+ ["vgcreate"; "VG"; "/dev/sda"];
+ ["lvcreate"; "LV1"; "VG"; "50"];
+ ["lvcreate"; "LV2"; "VG"; "50"];
+ ["lvremove"; "/dev/VG/LV1"];
+ ["lvs"]], ["/dev/VG/LV2"]);
+ InitEmpty, TestOutputList (
+ [["pvcreate"; "/dev/sda"];
+ ["vgcreate"; "VG"; "/dev/sda"];
+ ["lvcreate"; "LV1"; "VG"; "50"];
+ ["lvcreate"; "LV2"; "VG"; "50"];
+ ["lvremove"; "/dev/VG"];
+ ["lvs"]], []);
+ InitEmpty, TestOutputList (
+ [["pvcreate"; "/dev/sda"];
+ ["vgcreate"; "VG"; "/dev/sda"];
+ ["lvcreate"; "LV1"; "VG"; "50"];
+ ["lvcreate"; "LV2"; "VG"; "50"];
+ ["lvremove"; "/dev/VG"];
+ ["vgs"]], ["VG"])],
+ "remove an LVM logical volume",
+ "\
+Remove an LVM logical volume C<device>, where C<device> is
+the path to the LV, such as C</dev/VG/LV>.
+
+You can also remove all LVs in a volume group by specifying
+the VG name, C</dev/VG>.");
+
+ ("vgremove", (RErr, [String "vgname"]), 78, [],
+ [InitEmpty, TestOutputList (
+ [["pvcreate"; "/dev/sda"];
+ ["vgcreate"; "VG"; "/dev/sda"];
+ ["lvcreate"; "LV1"; "VG"; "50"];
+ ["lvcreate"; "LV2"; "VG"; "50"];
+ ["vgremove"; "VG"];
+ ["lvs"]], []);
+ InitEmpty, TestOutputList (
+ [["pvcreate"; "/dev/sda"];
+ ["vgcreate"; "VG"; "/dev/sda"];
+ ["lvcreate"; "LV1"; "VG"; "50"];
+ ["lvcreate"; "LV2"; "VG"; "50"];
+ ["vgremove"; "VG"];
+ ["vgs"]], [])],
+ "remove an LVM volume group",
+ "\
+Remove an LVM volume group C<vgname>, (for example C<VG>).
+
+This also forcibly removes all logical volumes in the volume
+group (if any).");
+
+ ("pvremove", (RErr, [String "device"]), 79, [],
+ [InitEmpty, TestOutputList (
+ [["pvcreate"; "/dev/sda"];
+ ["vgcreate"; "VG"; "/dev/sda"];
+ ["lvcreate"; "LV1"; "VG"; "50"];
+ ["lvcreate"; "LV2"; "VG"; "50"];
+ ["vgremove"; "VG"];
+ ["pvremove"; "/dev/sda"];
+ ["lvs"]], []);
+ InitEmpty, TestOutputList (
+ [["pvcreate"; "/dev/sda"];
+ ["vgcreate"; "VG"; "/dev/sda"];
+ ["lvcreate"; "LV1"; "VG"; "50"];
+ ["lvcreate"; "LV2"; "VG"; "50"];
+ ["vgremove"; "VG"];
+ ["pvremove"; "/dev/sda"];
+ ["vgs"]], []);
+ InitEmpty, TestOutputList (
+ [["pvcreate"; "/dev/sda"];
+ ["vgcreate"; "VG"; "/dev/sda"];
+ ["lvcreate"; "LV1"; "VG"; "50"];
+ ["lvcreate"; "LV2"; "VG"; "50"];
+ ["vgremove"; "VG"];
+ ["pvremove"; "/dev/sda"];
+ ["pvs"]], [])],
+ "remove an LVM physical volume",
+ "\
+This wipes a physical volume C<device> so that LVM will no longer
+recognise it.
+
+The implementation uses the C<pvremove> command which refuses to
+wipe physical volumes that contain any volume groups, so you have
+to remove those first.");
+
+ ("set_e2label", (RErr, [String "device"; String "label"]), 80, [],
+ [InitBasicFS, TestOutput (
+ [["set_e2label"; "/dev/sda1"; "testlabel"];
+ ["get_e2label"; "/dev/sda1"]], "testlabel")],
+ "set the ext2/3/4 filesystem label",
+ "\
+This sets the ext2/3/4 filesystem label of the filesystem on
+C<device> to C<label>. Filesystem labels are limited to
+16 characters.
+
+You can use either C<guestfs_tune2fs_l> or C<guestfs_get_e2label>
+to return the existing label on a filesystem.");
+
+ ("get_e2label", (RString "label", [String "device"]), 81, [],
+ [],
+ "get the ext2/3/4 filesystem label",
+ "\
+This returns the ext2/3/4 filesystem label of the filesystem on
+C<device>.");
+
+ ("set_e2uuid", (RErr, [String "device"; String "uuid"]), 82, [],
+ [InitBasicFS, TestOutput (
+ [["set_e2uuid"; "/dev/sda1"; "a3a61220-882b-4f61-89f4-cf24dcc7297d"];
+ ["get_e2uuid"; "/dev/sda1"]], "a3a61220-882b-4f61-89f4-cf24dcc7297d");
+ InitBasicFS, TestOutput (
+ [["set_e2uuid"; "/dev/sda1"; "clear"];
+ ["get_e2uuid"; "/dev/sda1"]], "");
+ (* We can't predict what UUIDs will be, so just check the commands run. *)
+ InitBasicFS, TestRun (
+ [["set_e2uuid"; "/dev/sda1"; "random"]]);
+ InitBasicFS, TestRun (
+ [["set_e2uuid"; "/dev/sda1"; "time"]])],
+ "set the ext2/3/4 filesystem UUID",
+ "\
+This sets the ext2/3/4 filesystem UUID of the filesystem on
+C<device> to C<uuid>. The format of the UUID and alternatives
+such as C<clear>, C<random> and C<time> are described in the
+L<tune2fs(8)> manpage.
+
+You can use either C<guestfs_tune2fs_l> or C<guestfs_get_e2uuid>
+to return the existing UUID of a filesystem.");
+
+ ("get_e2uuid", (RString "uuid", [String "device"]), 83, [],
+ [],
+ "get the ext2/3/4 filesystem UUID",
+ "\
+This returns the ext2/3/4 filesystem UUID of the filesystem on
+C<device>.");
+
+ ("fsck", (RInt "status", [String "fstype"; String "device"]), 84, [],
+ [InitBasicFS, TestOutputInt (
+ [["umount"; "/dev/sda1"];
+ ["fsck"; "ext2"; "/dev/sda1"]], 0);
+ InitBasicFS, TestOutputInt (
+ [["umount"; "/dev/sda1"];
+ ["zero"; "/dev/sda1"];
+ ["fsck"; "ext2"; "/dev/sda1"]], 8)],
+ "run the filesystem checker",
+ "\
+This runs the filesystem checker (fsck) on C<device> which
+should have filesystem type C<fstype>.
+
+The returned integer is the status. See L<fsck(8)> for the
+list of status codes from C<fsck>.
+
+Notes:
+
+=over 4
+
+=item *
+
+Multiple status codes can be summed together.
+
+=item *
+
+A non-zero return code can mean \"success\", for example if
+errors have been corrected on the filesystem.
+
+=item *
+
+Checking or repairing NTFS volumes is not supported
+(by linux-ntfs).
+
+=back
+
+This command is entirely equivalent to running C<fsck -a -t fstype device>.");
+
+ ("zero", (RErr, [String "device"]), 85, [],
+ [InitBasicFS, TestOutput (
+ [["umount"; "/dev/sda1"];
+ ["zero"; "/dev/sda1"];
+ ["file"; "/dev/sda1"]], "data")],
+ "write zeroes to the device",
+ "\
+This command writes zeroes over the first few blocks of C<device>.
+
+How many blocks are zeroed isn't specified (but it's I<not> enough
+to securely wipe the device). It should be sufficient to remove
+any partition tables, filesystem superblocks and so on.");
+
+ ("grub_install", (RErr, [String "root"; String "device"]), 86, [],
+ [InitBasicFS, TestOutputTrue (
+ [["grub_install"; "/"; "/dev/sda1"];
+ ["is_dir"; "/boot"]])],
+ "install GRUB",
+ "\
+This command installs GRUB (the Grand Unified Bootloader) on
+C<device>, with the root directory being C<root>.");
+
+ ("cp", (RErr, [String "src"; String "dest"]), 87, [],
+ [InitBasicFS, TestOutput (
+ [["write_file"; "/old"; "file content"; "0"];
+ ["cp"; "/old"; "/new"];
+ ["cat"; "/new"]], "file content");
+ InitBasicFS, TestOutputTrue (
+ [["write_file"; "/old"; "file content"; "0"];
+ ["cp"; "/old"; "/new"];
+ ["is_file"; "/old"]]);
+ InitBasicFS, TestOutput (
+ [["write_file"; "/old"; "file content"; "0"];
+ ["mkdir"; "/dir"];
+ ["cp"; "/old"; "/dir/new"];
+ ["cat"; "/dir/new"]], "file content")],
+ "copy a file",
+ "\
+This copies a file from C<src> to C<dest> where C<dest> is
+either a destination filename or destination directory.");
+
+ ("cp_a", (RErr, [String "src"; String "dest"]), 88, [],
+ [InitBasicFS, TestOutput (
+ [["mkdir"; "/olddir"];
+ ["mkdir"; "/newdir"];
+ ["write_file"; "/olddir/file"; "file content"; "0"];
+ ["cp_a"; "/olddir"; "/newdir"];
+ ["cat"; "/newdir/olddir/file"]], "file content")],
+ "copy a file or directory recursively",
+ "\
+This copies a file or directory from C<src> to C<dest>
+recursively using the C<cp -a> command.");
+
+ ("mv", (RErr, [String "src"; String "dest"]), 89, [],
+ [InitBasicFS, TestOutput (
+ [["write_file"; "/old"; "file content"; "0"];
+ ["mv"; "/old"; "/new"];
+ ["cat"; "/new"]], "file content");
+ InitBasicFS, TestOutputFalse (
+ [["write_file"; "/old"; "file content"; "0"];
+ ["mv"; "/old"; "/new"];
+ ["is_file"; "/old"]])],
+ "move a file",
+ "\
+This moves a file from C<src> to C<dest> where C<dest> is
+either a destination filename or destination directory.");
+
+ ("drop_caches", (RErr, [Int "whattodrop"]), 90, [],
+ [InitEmpty, TestRun (
+ [["drop_caches"; "3"]])],
+ "drop kernel page cache, dentries and inodes",
+ "\
+This instructs the guest kernel to drop its page cache,
+and/or dentries and inode caches. The parameter C<whattodrop>
+tells the kernel what precisely to drop, see
+L<http://linux-mm.org/Drop_Caches>
+
+Setting C<whattodrop> to 3 should drop everything.
+
+This automatically calls L<sync(2)> before the operation,
+so that the maximum guest memory is freed.");
+
+ ("dmesg", (RString "kmsgs", []), 91, [],
+ [InitEmpty, TestRun (
+ [["dmesg"]])],
+ "return kernel messages",
+ "\
+This returns the kernel messages (C<dmesg> output) from
+the guest kernel. This is sometimes useful for extended
+debugging of problems.
+
+Another way to get the same information is to enable
+verbose messages with C<guestfs_set_verbose> or by setting
+the environment variable C<LIBGUESTFS_DEBUG=1> before
+running the program.");
+
+ ("ping_daemon", (RErr, []), 92, [],
+ [InitEmpty, TestRun (
+ [["ping_daemon"]])],
+ "ping the guest daemon",
+ "\
+This is a test probe into the guestfs daemon running inside
+the qemu subprocess. Calling this function checks that the
+daemon responds to the ping message, without affecting the daemon
+or attached block device(s) in any other way.");
+
]
let all_functions = non_daemon_functions @ daemon_functions
s' :: string_split sep s''
)
+let files_equal n1 n2 =
+ let cmd = sprintf "cmp -s %s %s" (Filename.quote n1) (Filename.quote n2) in
+ match Sys.command cmd with
+ | 0 -> true
+ | 1 -> false
+ | i -> failwithf "%s: failed with error code %d" cmd i
+
let rec find_map f = function
| [] -> raise Not_found
| x :: xs ->
pr "struct %s_ctx {\n" shortname;
pr " /* This flag is set by the callbacks, so we know we've done\n";
pr " * the callbacks as expected, and in the right sequence.\n";
- pr " * 0 = not called, 1 = send called,\n";
- pr " * 1001 = reply called.\n";
+ pr " * 0 = not called, 1 = reply_cb called.\n";
pr " */\n";
pr " int cb_sequence;\n";
pr " struct guestfs_message_header hdr;\n";
pr " guestfs_main_loop *ml = guestfs_get_main_loop (g);\n";
pr " struct %s_ctx *ctx = (struct %s_ctx *) data;\n" shortname shortname;
pr "\n";
+ pr " /* This should definitely not happen. */\n";
+ pr " if (ctx->cb_sequence != 0) {\n";
+ pr " ctx->cb_sequence = 9999;\n";
+ pr " error (g, \"%%s: internal error: reply callback called twice\", \"%s\");\n" name;
+ pr " return;\n";
+ pr " }\n";
+ pr "\n";
pr " ml->main_loop_quit (ml, g);\n";
pr "\n";
pr " if (!xdr_guestfs_message_header (xdr, &ctx->hdr)) {\n";
);
pr " done:\n";
- pr " ctx->cb_sequence = 1001;\n";
+ pr " ctx->cb_sequence = 1;\n";
pr "}\n\n";
(* Generate the action stub. *)
pr " guestfs_set_reply_callback (g, %s_reply_cb, &ctx);\n" shortname;
pr " (void) ml->main_loop_run (ml, g);\n";
pr " guestfs_set_reply_callback (g, NULL, NULL);\n";
- pr " if (ctx.cb_sequence != 1001) {\n";
+ pr " if (ctx.cb_sequence != 1) {\n";
pr " error (g, \"%%s reply failed, see earlier error messages\", \"%s\");\n" name;
pr " guestfs_set_ready (g);\n";
pr " return %s;\n" error_code;
| String n -> pr " %s = args.%s;\n" n n
| OptString n -> pr " %s = args.%s ? *args.%s : NULL;\n" n n n
| StringList n ->
- pr " args.%s.%s_val = realloc (args.%s.%s_val, sizeof (char *) * (args.%s.%s_len+1));\n" n n n n n n;
- pr " args.%s.%s_val[args.%s.%s_len] = NULL;\n" n n n n;
- pr " %s = args.%s.%s_val;\n" n n n
+ pr " %s = realloc (args.%s.%s_val,\n" n n n;
+ pr " sizeof (char *) * (args.%s.%s_len+1));\n" n n;
+ pr " if (%s == NULL) {\n" n;
+ pr " reply_with_perror (\"realloc\");\n";
+ pr " goto done;\n";
+ pr " }\n";
+ pr " %s[args.%s.%s_len] = NULL;\n" n n n;
+ pr " args.%s.%s_val = %s;\n" n n n;
| Bool n -> pr " %s = args.%s;\n" n n
| Int n -> pr " %s = args.%s;\n" n n
| FileIn _ | FileOut _ -> ()
#ifdef HAVE_LIBREADLINE
-static const char *commands[] = {
+static const char *const commands[] = {
";
(* Get the commands and sort them, including the aliases. *)
pr " %sv != Val_int (0) ? String_val (Field (%sv, 0)) : NULL;\n"
n n
| StringList n ->
- pr " char **%s = ocaml_guestfs_strings_val (%sv);\n" n n
+ pr " char **%s = ocaml_guestfs_strings_val (g, %sv);\n" n n
| Bool n ->
pr " int %s = Bool_val (%sv);\n" n n
| Int n ->
AV *av;
I32 i;
- if (!arg || !SvOK (arg) || !SvROK (arg) || SvTYPE (SvRV (arg)) != SVt_PVAV) {
+ if (!arg || !SvOK (arg) || !SvROK (arg) || SvTYPE (SvRV (arg)) != SVt_PVAV)
croak (\"array reference expected\");
- }
av = (AV *)SvRV (arg);
- ret = (char **)malloc (av_len (av) + 1 + 1);
+ ret = malloc (av_len (av) + 1 + 1);
+ if (!ret)
+ croak (\"malloc failed\");
for (i = 0; i <= av_len (av); i++) {
SV **elem = av_fetch (av, i, 0);
pr " {\n";
pr " int i, len;\n";
pr " len = RARRAY_LEN (%sv);\n" n;
- pr " %s = malloc (sizeof (char *) * (len+1));\n" n;
+ pr " %s = guestfs_safe_malloc (g, sizeof (char *) * (len+1));\n"
+ n;
pr " for (i = 0; i < len; ++i) {\n";
pr " VALUE v = rb_ary_entry (%sv, i);\n" n;
pr " %s[i] = StringValueCStr (v);\n" n;
pr " %s = (*env)->GetStringUTFChars (env, j%s, NULL);\n" n n
| StringList n ->
pr " %s_len = (*env)->GetArrayLength (env, j%s);\n" n n;
- pr " %s = malloc (sizeof (char *) * (%s_len+1));\n" n n;
+ pr " %s = guestfs_safe_malloc (g, sizeof (char *) * (%s_len+1));\n" n n;
pr " for (i = 0; i < %s_len; ++i) {\n" n;
pr " jobject o = (*env)->GetObjectArrayElement (env, j%s, i);\n"
n;
let close () =
close_out !chan;
chan := stdout;
- Unix.rename filename_new filename;
- printf "written %s\n%!" filename;
+
+ (* Is the new file different from the current file? *)
+ if Sys.file_exists filename && files_equal filename filename_new then
+ Unix.unlink filename_new (* same, so skip it *)
+ else (
+ (* different, overwrite old one *)
+ (try Unix.chmod filename 0o644 with Unix.Unix_error _ -> ());
+ Unix.rename filename_new filename;
+ Unix.chmod filename 0o444;
+ printf "written %s\n%!" filename;
+ )
in
close
git.annexia.org / libguestfs.git / blobdiff