def __del__ (self):
libguestfsmod.close (self._o)
+ def test0 (self, str, optstr, strlist, b, integer, filein, fileout):
+ return libguestfsmod.test0 (self._o, str, optstr, strlist, b, integer, filein, fileout)
+
+ def test0rint (self, val):
+ return libguestfsmod.test0rint (self._o, val)
+
+ def test0rinterr (self):
+ return libguestfsmod.test0rinterr (self._o)
+
+ def test0rint64 (self, val):
+ return libguestfsmod.test0rint64 (self._o, val)
+
+ def test0rint64err (self):
+ return libguestfsmod.test0rint64err (self._o)
+
+ def test0rbool (self, val):
+ return libguestfsmod.test0rbool (self._o, val)
+
+ def test0rboolerr (self):
+ return libguestfsmod.test0rboolerr (self._o)
+
+ def test0rconststring (self, val):
+ return libguestfsmod.test0rconststring (self._o, val)
+
+ def test0rconststringerr (self):
+ return libguestfsmod.test0rconststringerr (self._o)
+
+ def test0rstring (self, val):
+ return libguestfsmod.test0rstring (self._o, val)
+
+ def test0rstringerr (self):
+ return libguestfsmod.test0rstringerr (self._o)
+
+ def test0rstringlist (self, val):
+ return libguestfsmod.test0rstringlist (self._o, val)
+
+ def test0rstringlisterr (self):
+ return libguestfsmod.test0rstringlisterr (self._o)
+
+ def test0rintbool (self, val):
+ return libguestfsmod.test0rintbool (self._o, val)
+
+ def test0rintboolerr (self):
+ return libguestfsmod.test0rintboolerr (self._o)
+
+ def test0rpvlist (self, val):
+ return libguestfsmod.test0rpvlist (self._o, val)
+
+ def test0rpvlisterr (self):
+ return libguestfsmod.test0rpvlisterr (self._o)
+
+ def test0rvglist (self, val):
+ return libguestfsmod.test0rvglist (self._o, val)
+
+ def test0rvglisterr (self):
+ return libguestfsmod.test0rvglisterr (self._o)
+
+ def test0rlvlist (self, val):
+ return libguestfsmod.test0rlvlist (self._o, val)
+
+ def test0rlvlisterr (self):
+ return libguestfsmod.test0rlvlisterr (self._o)
+
+ def test0rstat (self, val):
+ return libguestfsmod.test0rstat (self._o, val)
+
+ def test0rstaterr (self):
+ return libguestfsmod.test0rstaterr (self._o)
+
+ def test0rstatvfs (self, val):
+ return libguestfsmod.test0rstatvfs (self._o, val)
+
+ def test0rstatvfserr (self):
+ return libguestfsmod.test0rstatvfserr (self._o)
+
+ def test0rhashtable (self, val):
+ return libguestfsmod.test0rhashtable (self._o, val)
+
+ def test0rhashtableerr (self):
+ return libguestfsmod.test0rhashtableerr (self._o)
+
def launch (self):
u"""Internally libguestfs is implemented by running a
virtual machine using qemu(1).
to modify the image).
This is equivalent to the qemu parameter "-drive
- file=filename".
+ file=filename,cache=off".
+
+ Note that this call checks for the existence of
+ "filename". This stops you from specifying other types
+ of drive which are supported by qemu such as "nbd:" and
+ "http:" URLs. To specify those, use the general
+ "g.config" call instead.
"""
return libguestfsmod.add_drive (self._o, filename)
This is equivalent to the qemu parameter "-cdrom
filename".
+
+ Note that this call checks for the existence of
+ "filename". This stops you from specifying other types
+ of drive which are supported by qemu such as "nbd:" and
+ "http:" URLs. To specify those, use the general
+ "g.config" call instead.
"""
return libguestfsmod.add_cdrom (self._o, filename)
+ def add_drive_ro (self, filename):
+ u"""This adds a drive in snapshot mode, making it
+ effectively read-only.
+
+ Note that writes to the device are allowed, and will be
+ seen for the duration of the guestfs handle, but they
+ are written to a temporary file which is discarded as
+ soon as the guestfs handle is closed. We don't currently
+ have any method to enable changes to be committed,
+ although qemu can support this.
+
+ This is equivalent to the qemu parameter "-drive
+ file=filename,snapshot=on".
+
+ Note that this call checks for the existence of
+ "filename". This stops you from specifying other types
+ of drive which are supported by qemu such as "nbd:" and
+ "http:" URLs. To specify those, use the general
+ "g.config" call instead.
+ """
+ return libguestfsmod.add_drive_ro (self._o, filename)
+
def config (self, qemuparam, qemuvalue):
u"""This can be used to add arbitrary qemu command line
parameters of the form "-param value". Actually it's not
You can also override this by setting the
"LIBGUESTFS_QEMU" environment variable.
- The string "qemu" is stashed in the libguestfs handle,
- so the caller must make sure it remains valid for the
- lifetime of the handle.
-
Setting "qemu" to "NULL" restores the default qemu
binary.
"""
The default is "$libdir/guestfs" unless overridden by
setting "LIBGUESTFS_PATH" environment variable.
- The string "path" is stashed in the libguestfs handle,
- so the caller must make sure it remains valid for the
- lifetime of the handle.
-
Setting "path" to "NULL" restores the default path.
"""
return libguestfsmod.set_path (self._o, path)
The default is "NULL" unless overridden by setting
"LIBGUESTFS_APPEND" environment variable.
- The string "append" is stashed in the libguestfs handle,
- so the caller must make sure it remains valid for the
- lifetime of the handle.
-
Setting "append" to "NULL" means *no* additional options
are passed (libguestfs always adds a few of its own).
"""
you would pass "lines" as a single element list, when
the single element being the string "," (comma).
+ See also: "g.sfdisk_l", "g.sfdisk_N"
+
This command is dangerous. Without careful use you can
easily destroy all your data.
"""
The single parameter is an argv-style list of arguments.
The first element is the name of the program to run.
Subsequent elements are parameters. The list must be
- non-empty (ie. must contain a program name).
+ non-empty (ie. must contain a program name). Note that
+ the command runs directly, and is *not* invoked via the
+ shell (see "g.sh").
The return value is anything printed to *stdout* by the
command.
u"""This is the same as "g.command", but splits the result
into a list of lines.
+ See also: "g.sh_lines"
+
This function returns a list of strings.
Because of the message protocol, there is a transfer
*not* enough to securely wipe the device). It should be
sufficient to remove any partition tables, filesystem
superblocks and so on.
+
+ See also: "g.scrub_device".
"""
return libguestfsmod.zero (self._o, device)
"""
return libguestfsmod.hexdump (self._o, path)
+ def zerofree (self, device):
+ u"""This runs the *zerofree* program on "device". This
+ program claims to zero unused inodes and disk blocks on
+ an ext2/3 filesystem, thus making it possible to
+ compress the filesystem more effectively.
+
+ You should not run this program if the filesystem is
+ mounted.
+
+ It is possible that using this program can damage the
+ filesystem or data on the filesystem.
+ """
+ return libguestfsmod.zerofree (self._o, device)
+
+ def pvresize (self, device):
+ u"""This resizes (expands or shrinks) an existing LVM
+ physical volume to match the new size of the underlying
+ device.
+ """
+ return libguestfsmod.pvresize (self._o, device)
+
+ def sfdisk_N (self, device, n, cyls, heads, sectors, line):
+ u"""This runs sfdisk(8) option to modify just the single
+ partition "n" (note: "n" counts from 1).
+
+ For other parameters, see "g.sfdisk". You should usually
+ pass 0 for the cyls/heads/sectors parameters.
+
+ This command is dangerous. Without careful use you can
+ easily destroy all your data.
+ """
+ return libguestfsmod.sfdisk_N (self._o, device, n, cyls, heads, sectors, line)
+
+ def sfdisk_l (self, device):
+ u"""This displays the partition table on "device", in the
+ human-readable output of the sfdisk(8) command. It is
+ not intended to be parsed.
+ """
+ return libguestfsmod.sfdisk_l (self._o, device)
+
+ def sfdisk_kernel_geometry (self, device):
+ u"""This displays the kernel's idea of the geometry of
+ "device".
+
+ The result is in human-readable format, and not designed
+ to be parsed.
+ """
+ return libguestfsmod.sfdisk_kernel_geometry (self._o, device)
+
+ def sfdisk_disk_geometry (self, device):
+ u"""This displays the disk geometry of "device" read from
+ the partition table. Especially in the case where the
+ underlying block device has been resized, this can be
+ different from the kernel's idea of the geometry (see
+ "g.sfdisk_kernel_geometry").
+
+ The result is in human-readable format, and not designed
+ to be parsed.
+ """
+ return libguestfsmod.sfdisk_disk_geometry (self._o, device)
+
+ def vg_activate_all (self, activate):
+ u"""This command activates or (if "activate" is false)
+ deactivates all logical volumes in all volume groups. If
+ activated, then they are made known to the kernel, ie.
+ they appear as "/dev/mapper" devices. If deactivated,
+ then those devices disappear.
+
+ This command is the same as running "vgchange -a y|n"
+ """
+ return libguestfsmod.vg_activate_all (self._o, activate)
+
+ def vg_activate (self, activate, volgroups):
+ u"""This command activates or (if "activate" is false)
+ deactivates all logical volumes in the listed volume
+ groups "volgroups". If activated, then they are made
+ known to the kernel, ie. they appear as "/dev/mapper"
+ devices. If deactivated, then those devices disappear.
+
+ This command is the same as running "vgchange -a y|n
+ volgroups..."
+
+ Note that if "volgroups" is an empty list then all
+ volume groups are activated or deactivated.
+ """
+ return libguestfsmod.vg_activate (self._o, activate, volgroups)
+
+ def lvresize (self, device, mbytes):
+ u"""This resizes (expands or shrinks) an existing LVM
+ logical volume to "mbytes". When reducing, data in the
+ reduced part is lost.
+ """
+ return libguestfsmod.lvresize (self._o, device, mbytes)
+
+ def resize2fs (self, device):
+ u"""This resizes an ext2 or ext3 filesystem to match the
+ size of the underlying device.
+
+ *Note:* It is sometimes required that you run
+ "g.e2fsck_f" on the "device" before calling this
+ command. For unknown reasons "resize2fs" sometimes gives
+ an error about this and sometimes not. In any case, it
+ is always safe to call "g.e2fsck_f" before calling this
+ function.
+ """
+ return libguestfsmod.resize2fs (self._o, device)
+
+ def find (self, directory):
+ u"""This command lists out all files and directories,
+ recursively, starting at "directory". It is essentially
+ equivalent to running the shell command "find directory
+ -print" but some post-processing happens on the output,
+ described below.
+
+ This returns a list of strings *without any prefix*.
+ Thus if the directory structure was:
+
+ /tmp/a
+ /tmp/b
+ /tmp/c/d
+
+ then the returned list from "g.find" "/tmp" would be 4
+ elements:
+
+ a
+ b
+ c
+ c/d
+
+ If "directory" is not a directory, then this command
+ returns an error.
+
+ The returned list is sorted.
+
+ This function returns a list of strings.
+ """
+ return libguestfsmod.find (self._o, directory)
+
+ def e2fsck_f (self, device):
+ u"""This runs "e2fsck -p -f device", ie. runs the ext2/ext3
+ filesystem checker on "device", noninteractively ("-p"),
+ even if the filesystem appears to be clean ("-f").
+
+ This command is only needed because of "g.resize2fs"
+ (q.v.). Normally you should use "g.fsck".
+ """
+ return libguestfsmod.e2fsck_f (self._o, device)
+
+ def sleep (self, secs):
+ u"""Sleep for "secs" seconds.
+ """
+ return libguestfsmod.sleep (self._o, secs)
+
+ def ntfs_3g_probe (self, rw, device):
+ u"""This command runs the ntfs-3g.probe(8) command which
+ probes an NTFS "device" for mountability. (Not all NTFS
+ volumes can be mounted read-write, and some cannot be
+ mounted at all).
+
+ "rw" is a boolean flag. Set it to true if you want to
+ test if the volume can be mounted read-write. Set it to
+ false if you want to test if the volume can be mounted
+ read-only.
+
+ The return value is an integer which 0 if the operation
+ would succeed, or some non-zero value documented in the
+ ntfs-3g.probe(8) manual page.
+ """
+ return libguestfsmod.ntfs_3g_probe (self._o, rw, device)
+
+ def sh (self, command):
+ u"""This call runs a command from the guest filesystem via
+ the guest's "/bin/sh".
+
+ This is like "g.command", but passes the command to:
+
+ /bin/sh -c "command"
+
+ Depending on the guest's shell, this usually results in
+ wildcards being expanded, shell expressions being
+ interpolated and so on.
+
+ All the provisos about "g.command" apply to this call.
+ """
+ return libguestfsmod.sh (self._o, command)
+
+ def sh_lines (self, command):
+ u"""This is the same as "g.sh", but splits the result into a
+ list of lines.
+
+ See also: "g.command_lines"
+
+ This function returns a list of strings.
+ """
+ return libguestfsmod.sh_lines (self._o, command)
+
+ def glob_expand (self, pattern):
+ u"""This command searches for all the pathnames matching
+ "pattern" according to the wildcard expansion rules used
+ by the shell.
+
+ If no paths match, then this returns an empty list
+ (note: not an error).
+
+ It is just a wrapper around the C glob(3) function with
+ flags "GLOB_MARK|GLOB_BRACE". See that manual page for
+ more details.
+
+ This function returns a list of strings.
+ """
+ return libguestfsmod.glob_expand (self._o, pattern)
+
+ def scrub_device (self, device):
+ u"""This command writes patterns over "device" to make data
+ retrieval more difficult.
+
+ It is an interface to the scrub(1) program. See that
+ manual page for more details.
+
+ This command is dangerous. Without careful use you can
+ easily destroy all your data.
+ """
+ return libguestfsmod.scrub_device (self._o, device)
+
+ def scrub_file (self, file):
+ u"""This command writes patterns over a file to make data
+ retrieval more difficult.
+
+ The file is *removed* after scrubbing.
+
+ It is an interface to the scrub(1) program. See that
+ manual page for more details.
+ """
+ return libguestfsmod.scrub_file (self._o, file)
+
+ def scrub_freespace (self, dir):
+ u"""This command creates the directory "dir" and then fills
+ it with files until the filesystem is full, and scrubs
+ the files as for "g.scrub_file", and deletes them. The
+ intention is to scrub any free space on the partition
+ containing "dir".
+
+ It is an interface to the scrub(1) program. See that
+ manual page for more details.
+ """
+ return libguestfsmod.scrub_freespace (self._o, dir)
+
git.annexia.org / libguestfs.git / blobdiff