/**
* launch the qemu subprocess
- *
+ * <p>
* Internally libguestfs is implemented by running a
* virtual machine using qemu(1).
- *
+ * <p>
* You should call this after configuring the handle (eg.
* adding drives) but before performing any actions.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void launch ()
/**
* wait until the qemu subprocess launches
- *
+ * <p>
* Internally libguestfs is implemented by running a
* virtual machine using qemu(1).
- *
+ * <p>
* You should call this after "g.launch" to wait for the
* launch to complete.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void wait_ready ()
/**
* kill the qemu subprocess
- *
+ * <p>
* This kills the qemu subprocess. You should never need to
* call this.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void kill_subprocess ()
/**
* add an image to examine or modify
- *
+ * <p>
* This function adds a virtual machine disk image
* "filename" to the guest. The first time you call this
* function, the disk appears as IDE disk 0 ("/dev/sda") in
* the guest, the second time as "/dev/sdb", and so on.
- *
+ * <p>
* You don't necessarily need to be root when using
* libguestfs. However you obviously do need sufficient
* permissions to access the filename for whatever
* operations you want to perform (ie. read access if you
* just want to read the image or write access if you want
* to modify the image).
- *
+ * <p>
* This is equivalent to the qemu parameter "-drive
* file=filename".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void add_drive (String filename)
/**
* add a CD-ROM disk image to examine
- *
+ * <p>
* This function adds a virtual CD-ROM disk image to the
* guest.
- *
+ * <p>
* This is equivalent to the qemu parameter "-cdrom
* filename".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void add_cdrom (String filename)
/**
* add qemu parameters
- *
+ * <p>
* This can be used to add arbitrary qemu command line
* parameters of the form "-param value". Actually it's not
* quite arbitrary - we prevent you from setting some
* parameters which would interfere with parameters that we
* use.
- *
+ * <p>
* The first character of "param" string must be a "-"
* (dash).
- *
+ * <p>
* "value" can be NULL.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void config (String qemuparam, String qemuvalue)
/**
* set the qemu binary
- *
+ * <p>
* Set the qemu binary that we will use.
- *
+ * <p>
* The default is chosen when the library was compiled by
* the configure script.
- *
+ * <p>
* You can also override this by setting the
* "LIBGUESTFS_QEMU" environment variable.
- *
+ * <p>
* Setting "qemu" to "NULL" restores the default qemu
* binary.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void set_qemu (String qemu)
/**
* get the qemu binary
- *
+ * <p>
* Return the current qemu binary.
- *
+ * <p>
* This is always non-NULL. If it wasn't set already, then
* this will return the default qemu binary name.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String get_qemu ()
/**
* set the search path
- *
+ * <p>
* Set the path that libguestfs searches for kernel and
* initrd.img.
- *
+ * <p>
* The default is "$libdir/guestfs" unless overridden by
* setting "LIBGUESTFS_PATH" environment variable.
- *
+ * <p>
* Setting "path" to "NULL" restores the default path.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void set_path (String path)
/**
* get the search path
- *
+ * <p>
* Return the current search path.
- *
+ * <p>
* This is always non-NULL. If it wasn't set already, then
* this will return the default path.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String get_path ()
/**
* add options to kernel command line
- *
+ * <p>
* This function is used to add additional options to the
* guest kernel command line.
- *
+ * <p>
* The default is "NULL" unless overridden by setting
* "LIBGUESTFS_APPEND" environment variable.
- *
+ * <p>
* Setting "append" to "NULL" means *no* additional options
* are passed (libguestfs always adds a few of its own).
- *
+ * <p>
* @throws LibGuestFSException
*/
public void set_append (String append)
/**
* get the additional kernel options
- *
+ * <p>
* Return the additional kernel options which are added to
* the guest kernel command line.
- *
+ * <p>
* If "NULL" then no options are added.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String get_append ()
/**
* set autosync mode
- *
+ * <p>
* If "autosync" is true, this enables autosync. Libguestfs
* will make a best effort attempt to run "g.umount_all"
* followed by "g.sync" when the handle is closed (also if
* the program exits without closing handles).
- *
+ * <p>
* This is disabled by default (except in guestfish where
* it is enabled by default).
- *
+ * <p>
* @throws LibGuestFSException
*/
public void set_autosync (boolean autosync)
/**
* get autosync mode
- *
+ * <p>
* Get the autosync flag.
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean get_autosync ()
/**
* set verbose mode
- *
+ * <p>
* If "verbose" is true, this turns on verbose messages (to
* "stderr").
- *
+ * <p>
* Verbose messages are disabled unless the environment
* variable "LIBGUESTFS_DEBUG" is defined and set to 1.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void set_verbose (boolean verbose)
/**
* get verbose mode
- *
+ * <p>
* This returns the verbose messages flag.
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean get_verbose ()
/**
* is ready to accept commands
- *
+ * <p>
* This returns true iff this handle is ready to accept
* commands (in the "READY" state).
- *
+ * <p>
* For more information on states, see guestfs(3).
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean is_ready ()
/**
* is in configuration state
- *
+ * <p>
* This returns true iff this handle is being configured
* (in the "CONFIG" state).
- *
+ * <p>
* For more information on states, see guestfs(3).
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean is_config ()
/**
* is launching subprocess
- *
+ * <p>
* This returns true iff this handle is launching the
* subprocess (in the "LAUNCHING" state).
- *
+ * <p>
* For more information on states, see guestfs(3).
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean is_launching ()
/**
* is busy processing a command
- *
+ * <p>
* This returns true iff this handle is busy processing a
* command (in the "BUSY" state).
- *
+ * <p>
* For more information on states, see guestfs(3).
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean is_busy ()
/**
* get the current state
- *
+ * <p>
* This returns the current state as an opaque integer.
* This is only useful for printing debug and internal
* error messages.
- *
+ * <p>
* For more information on states, see guestfs(3).
- *
+ * <p>
* @throws LibGuestFSException
*/
public int get_state ()
/**
* set state to busy
- *
+ * <p>
* This sets the state to "BUSY". This is only used when
* implementing actions using the low-level API.
- *
+ * <p>
* For more information on states, see guestfs(3).
- *
+ * <p>
* @throws LibGuestFSException
*/
public void set_busy ()
/**
* set state to ready
- *
+ * <p>
* This sets the state to "READY". This is only used when
* implementing actions using the low-level API.
- *
+ * <p>
* For more information on states, see guestfs(3).
- *
+ * <p>
* @throws LibGuestFSException
*/
public void set_ready ()
/**
* leave the busy state
- *
+ * <p>
* This sets the state to "READY", or if in "CONFIG" then
* it leaves the state as is. This is only used when
* implementing actions using the low-level API.
- *
+ * <p>
* For more information on states, see guestfs(3).
- *
+ * <p>
* @throws LibGuestFSException
*/
public void end_busy ()
/**
* mount a guest disk at a position in the filesystem
- *
+ * <p>
* Mount a guest disk at a position in the filesystem.
* Block devices are named "/dev/sda", "/dev/sdb" and so
* on, as they were added to the guest. If those block
* devices contain partitions, they will have the usual
* names (eg. "/dev/sda1"). Also LVM "/dev/VG/LV"-style
* names can be used.
- *
+ * <p>
* The rules are the same as for mount(2): A filesystem
* must first be mounted on "/" before others can be
* mounted. Other filesystems can only be mounted on
* directories which already exist.
- *
+ * <p>
* The mounted filesystem is writable, if we have
* sufficient permissions on the underlying device.
- *
+ * <p>
* The filesystem options "sync" and "noatime" are set with
* this call, in order to improve reliability.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void mount (String device, String mountpoint)
/**
* sync disks, writes are flushed through to the disk image
- *
+ * <p>
* This syncs the disk, so that any writes are flushed
* through to the underlying disk image.
- *
+ * <p>
* You should always call this if you have modified a disk
* image, before closing the handle.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void sync ()
/**
* update file timestamps or create a new file
- *
+ * <p>
* Touch acts like the touch(1) command. It can be used to
* update the timestamps on a file, or, if the file does
* not exist, to create a new zero-length file.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void touch (String path)
/**
* list the contents of a file
- *
+ * <p>
* Return the contents of the file named "path".
- *
+ * <p>
* Note that this function cannot correctly handle binary
* files (specifically, files containing "\0" character
* which is treated as end of string). For those you need
* to use the "g.download" function which has a more
* complex interface.
- *
+ * <p>
* Because of the message protocol, there is a transfer
* limit of somewhere between 2MB and 4MB. To transfer
* large files you should use FTP.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String cat (String path)
/**
* list the files in a directory (long format)
- *
+ * <p>
* List the files in "directory" (relative to the root
* directory, there is no cwd) in the format of 'ls -la'.
- *
+ * <p>
* This command is mostly useful for interactive sessions.
* It is *not* intended that you try to parse the output
* string.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String ll (String directory)
/**
* list the files in a directory
- *
+ * <p>
* List the files in "directory" (relative to the root
* directory, there is no cwd). The '.' and '..' entries
* are not returned, but hidden files are shown.
- *
+ * <p>
* This command is mostly useful for interactive sessions.
* Programs should probably use "g.readdir" instead.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] ls (String directory)
/**
* list the block devices
- *
+ * <p>
* List all the block devices.
- *
+ * <p>
* The full block device names are returned, eg. "/dev/sda"
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] list_devices ()
/**
* list the partitions
- *
+ * <p>
* List all the partitions detected on all block devices.
- *
+ * <p>
* The full partition device names are returned, eg.
* "/dev/sda1"
- *
+ * <p>
* This does not return logical volumes. For that you will
* need to call "g.lvs".
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] list_partitions ()
/**
* list the LVM physical volumes (PVs)
- *
+ * <p>
* List all the physical volumes detected. This is the
* equivalent of the pvs(8) command.
- *
+ * <p>
* This returns a list of just the device names that
* contain PVs (eg. "/dev/sda2").
- *
+ * <p>
* See also "g.pvs_full".
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] pvs ()
/**
* list the LVM volume groups (VGs)
- *
+ * <p>
* List all the volumes groups detected. This is the
* equivalent of the vgs(8) command.
- *
+ * <p>
* This returns a list of just the volume group names that
* were detected (eg. "VolGroup00").
- *
+ * <p>
* See also "g.vgs_full".
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] vgs ()
/**
* list the LVM logical volumes (LVs)
- *
+ * <p>
* List all the logical volumes detected. This is the
* equivalent of the lvs(8) command.
- *
+ * <p>
* This returns a list of the logical volume device names
* (eg. "/dev/VolGroup00/LogVol00").
- *
+ * <p>
* See also "g.lvs_full".
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] lvs ()
/**
* list the LVM physical volumes (PVs)
- *
+ * <p>
* List all the physical volumes detected. This is the
* equivalent of the pvs(8) command. The "full" version
* includes all fields.
- *
+ * <p>
* @throws LibGuestFSException
*/
public PV[] pvs_full ()
/**
* list the LVM volume groups (VGs)
- *
+ * <p>
* List all the volumes groups detected. This is the
* equivalent of the vgs(8) command. The "full" version
* includes all fields.
- *
+ * <p>
* @throws LibGuestFSException
*/
public VG[] vgs_full ()
/**
* list the LVM logical volumes (LVs)
- *
+ * <p>
* List all the logical volumes detected. This is the
* equivalent of the lvs(8) command. The "full" version
* includes all fields.
- *
+ * <p>
* @throws LibGuestFSException
*/
public LV[] lvs_full ()
/**
* read file as lines
- *
+ * <p>
* Return the contents of the file named "path".
- *
+ * <p>
* The file contents are returned as a list of lines.
* Trailing "LF" and "CRLF" character sequences are *not*
* returned.
- *
+ * <p>
* Note that this function cannot correctly handle binary
* files (specifically, files containing "\0" character
* which is treated as end of line). For those you need to
* use the "g.read_file" function which has a more complex
* interface.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] read_lines (String path)
/**
* create a new Augeas handle
- *
+ * <p>
* Create a new Augeas handle for editing configuration
* files. If there was any previous Augeas handle
* associated with this guestfs session, then it is closed.
- *
+ * <p>
* You must call this before using any other "g.aug_*"
* commands.
- *
+ * <p>
* "root" is the filesystem root. "root" must not be NULL,
* use "/" instead.
- *
+ * <p>
* The flags are the same as the flags defined in
* <augeas.h>, the logical *or* of the following integers:
- *
+ * <p>
* "AUG_SAVE_BACKUP" = 1
* Keep the original file with a ".augsave" extension.
- *
+ * <p>
* "AUG_SAVE_NEWFILE" = 2
* Save changes into a file with extension ".augnew",
* and do not overwrite original. Overrides
* "AUG_SAVE_BACKUP".
- *
+ * <p>
* "AUG_TYPE_CHECK" = 4
* Typecheck lenses (can be expensive).
- *
+ * <p>
* "AUG_NO_STDINC" = 8
* Do not use standard load path for modules.
- *
+ * <p>
* "AUG_SAVE_NOOP" = 16
* Make save a no-op, just record what would have been
* changed.
- *
+ * <p>
* "AUG_NO_LOAD" = 32
* Do not load the tree in "g.aug_init".
- *
+ * <p>
* To close the handle, you can call "g.aug_close".
- *
+ * <p>
* To find out more about Augeas, see <http://augeas.net/>.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void aug_init (String root, int flags)
/**
* close the current Augeas handle
- *
+ * <p>
* Close the current Augeas handle and free up any
* resources used by it. After calling this, you have to
* call "g.aug_init" again before you can use any other
* Augeas functions.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void aug_close ()
/**
* define an Augeas variable
- *
+ * <p>
* Defines an Augeas variable "name" whose value is the
* result of evaluating "expr". If "expr" is NULL, then
* "name" is undefined.
- *
+ * <p>
* On success this returns the number of nodes in "expr",
* or 0 if "expr" evaluates to something which is not a
* nodeset.
- *
+ * <p>
* @throws LibGuestFSException
*/
public int aug_defvar (String name, String expr)
/**
* define an Augeas node
- *
+ * <p>
* Defines a variable "name" whose value is the result of
* evaluating "expr".
- *
+ * <p>
* If "expr" evaluates to an empty nodeset, a node is
* created, equivalent to calling "g.aug_set" "expr",
* "value". "name" will be the nodeset containing that
* single node.
- *
+ * <p>
* On success this returns a pair containing the number of
* nodes in the nodeset, and a boolean flag if a node was
* created.
- *
+ * <p>
* @throws LibGuestFSException
*/
public IntBool aug_defnode (String name, String expr, String val)
/**
* look up the value of an Augeas path
- *
+ * <p>
* Look up the value associated with "path". If "path"
* matches exactly one node, the "value" is returned.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String aug_get (String path)
/**
* set Augeas path to value
- *
+ * <p>
* Set the value associated with "path" to "value".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void aug_set (String path, String val)
/**
* insert a sibling Augeas node
- *
+ * <p>
* Create a new sibling "label" for "path", inserting it
* into the tree before or after "path" (depending on the
* boolean flag "before").
- *
+ * <p>
* "path" must match exactly one existing node in the tree,
* and "label" must be a label, ie. not contain "/", "*" or
* end with a bracketed index "[N]".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void aug_insert (String path, String label, boolean before)
/**
* remove an Augeas path
- *
+ * <p>
* Remove "path" and all of its children.
- *
+ * <p>
* On success this returns the number of entries which were
* removed.
- *
+ * <p>
* @throws LibGuestFSException
*/
public int aug_rm (String path)
/**
* move Augeas node
- *
+ * <p>
* Move the node "src" to "dest". "src" must match exactly
* one node. "dest" is overwritten if it exists.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void aug_mv (String src, String dest)
/**
* return Augeas nodes which match path
- *
+ * <p>
* Returns a list of paths which match the path expression
* "path". The returned paths are sufficiently qualified so
* that they match exactly one node in the current tree.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] aug_match (String path)
/**
* write all pending Augeas changes to disk
- *
+ * <p>
* This writes all pending changes to disk.
- *
+ * <p>
* The flags which were passed to "g.aug_init" affect
* exactly how files are saved.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void aug_save ()
/**
* load files into the tree
- *
+ * <p>
* Load files into the tree.
- *
+ * <p>
* See "aug_load" in the Augeas documentation for the full
* gory details.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void aug_load ()
/**
* list Augeas nodes under a path
- *
+ * <p>
* This is just a shortcut for listing "g.aug_match"
* "path/*" and sorting the resulting nodes into
* alphabetical order.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] aug_ls (String path)
/**
* remove a file
- *
+ * <p>
* Remove the single file "path".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void rm (String path)
/**
* remove a directory
- *
+ * <p>
* Remove the single directory "path".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void rmdir (String path)
/**
* remove a file or directory recursively
- *
+ * <p>
* Remove the file or directory "path", recursively
* removing the contents if its a directory. This is like
* the "rm -rf" shell command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void rm_rf (String path)
/**
* create a directory
- *
+ * <p>
* Create a directory named "path".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void mkdir (String path)
/**
* create a directory and parents
- *
+ * <p>
* Create a directory named "path", creating any parent
* directories as necessary. This is like the "mkdir -p"
* shell command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void mkdir_p (String path)
/**
* change file mode
- *
+ * <p>
* Change the mode (permissions) of "path" to "mode". Only
* numeric modes are supported.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void chmod (int mode, String path)
/**
* change file owner and group
- *
+ * <p>
* Change the file owner to "owner" and group to "group".
- *
+ * <p>
* Only numeric uid and gid are supported. If you want to
* use names, you will need to locate and parse the
* password file yourself (Augeas support makes this
* relatively easy).
- *
+ * <p>
* @throws LibGuestFSException
*/
public void chown (int owner, int group, String path)
/**
* test if file or directory exists
- *
+ * <p>
* This returns "true" if and only if there is a file,
* directory (or anything) with the given "path" name.
- *
+ * <p>
* See also "g.is_file", "g.is_dir", "g.stat".
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean exists (String path)
/**
* test if file exists
- *
+ * <p>
* This returns "true" if and only if there is a file with
* the given "path" name. Note that it returns false for
* other objects like directories.
- *
+ * <p>
* See also "g.stat".
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean is_file (String path)
/**
* test if file exists
- *
+ * <p>
* This returns "true" if and only if there is a directory
* with the given "path" name. Note that it returns false
* for other objects like files.
- *
+ * <p>
* See also "g.stat".
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean is_dir (String path)
/**
* create an LVM physical volume
- *
+ * <p>
* This creates an LVM physical volume on the named
* "device", where "device" should usually be a partition
* name such as "/dev/sda1".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void pvcreate (String device)
/**
* create an LVM volume group
- *
+ * <p>
* This creates an LVM volume group called "volgroup" from
* the non-empty list of physical volumes "physvols".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void vgcreate (String volgroup, String[] physvols)
/**
* create an LVM volume group
- *
+ * <p>
* This creates an LVM volume group called "logvol" on the
* volume group "volgroup", with "size" megabytes.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void lvcreate (String logvol, String volgroup, int mbytes)
/**
* make a filesystem
- *
+ * <p>
* This creates a filesystem on "device" (usually a
* partition or LVM logical volume). The filesystem type is
* "fstype", for example "ext3".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void mkfs (String fstype, String device)
/**
* create partitions on a block device
- *
+ * <p>
* This is a direct interface to the sfdisk(8) program for
* creating partitions on block devices.
- *
+ * <p>
* "device" should be a block device, for example
* "/dev/sda".
- *
+ * <p>
* "cyls", "heads" and "sectors" are the number of
* cylinders, heads and sectors on the device, which are
* passed directly to sfdisk as the *-C*, *-H* and *-S*
* (floppy-sized) disks, sfdisk (or rather, the kernel)
* cannot work out the right geometry and you will need to
* tell it.
- *
+ * <p>
* "lines" is a list of lines that we feed to "sfdisk". For
* more information refer to the sfdisk(8) manpage.
- *
+ * <p>
* To create a single partition occupying the whole disk,
* you would pass "lines" as a single element list, when
* the single element being the string "," (comma).
- *
+ * <p>
* See also: "g.sfdisk_l", "g.sfdisk_N"
- *
+ * <p>
* This command is dangerous. Without careful use you can
* easily destroy all your data.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void sfdisk (String device, int cyls, int heads, int sectors, String[] lines)
/**
* create a file
- *
+ * <p>
* This call creates a file called "path". The contents of
* the file is the string "content" (which can contain any
* 8 bit data), with length "size".
- *
+ * <p>
* As a special case, if "size" is 0 then the length is
* calculated using "strlen" (so in this case the content
* cannot contain embedded ASCII NULs).
- *
+ * <p>
* *NB.* Owing to a bug, writing content containing ASCII
* NUL characters does *not* work, even if the length is
* specified. We hope to resolve this bug in a future
* version. In the meantime use "g.upload".
- *
+ * <p>
* Because of the message protocol, there is a transfer
* limit of somewhere between 2MB and 4MB. To transfer
* large files you should use FTP.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void write_file (String path, String content, int size)
/**
* unmount a filesystem
- *
+ * <p>
* This unmounts the given filesystem. The filesystem may
* be specified either by its mountpoint (path) or the
* device which contains the filesystem.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void umount (String pathordevice)
/**
* show mounted filesystems
- *
+ * <p>
* This returns the list of currently mounted filesystems.
* It returns the list of devices (eg. "/dev/sda1",
* "/dev/VG/LV").
- *
+ * <p>
* Some internal mounts are not shown.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] mounts ()
/**
* unmount all filesystems
- *
+ * <p>
* This unmounts all mounted filesystems.
- *
+ * <p>
* Some internal mounts are not unmounted by this call.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void umount_all ()
/**
* remove all LVM LVs, VGs and PVs
- *
+ * <p>
* This command removes all LVM logical volumes, volume
* groups and physical volumes.
- *
+ * <p>
* This command is dangerous. Without careful use you can
* easily destroy all your data.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void lvm_remove_all ()
/**
* determine file type
- *
+ * <p>
* This call uses the standard file(1) command to determine
* the type or contents of the file. This also works on
* devices, for example to find out whether a partition
* contains a filesystem.
- *
+ * <p>
* The exact command which runs is "file -bsL path". Note
* in particular that the filename is not prepended to the
* output (the "-b" option).
- *
+ * <p>
* @throws LibGuestFSException
*/
public String file (String path)
/**
* run a command from the guest filesystem
- *
+ * <p>
* This call runs a command from the guest filesystem. The
* filesystem must be mounted, and must contain a
* compatible operating system (ie. something Linux, with
* the same or compatible processor architecture).
- *
+ * <p>
* The single parameter is an argv-style list of arguments.
* The first element is the name of the program to run.
* Subsequent elements are parameters. The list must be
* non-empty (ie. must contain a program name).
- *
+ * <p>
* The return value is anything printed to *stdout* by the
* command.
- *
+ * <p>
* If the command returns a non-zero exit status, then this
* function returns an error message. The error message
* string is the content of *stderr* from the command.
- *
+ * <p>
* The $PATH environment variable will contain at least
* "/usr/bin" and "/bin". If you require a program from
* another location, you should provide the full path in
* the first parameter.
- *
+ * <p>
* Shared libraries and data files required by the program
* must be available on filesystems which are mounted in
* the correct places. It is the caller's responsibility to
* ensure all filesystems that are needed are mounted at
* the right locations.
- *
+ * <p>
* Because of the message protocol, there is a transfer
* limit of somewhere between 2MB and 4MB. To transfer
* large files you should use FTP.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String command (String[] arguments)
/**
* run a command, returning lines
- *
+ * <p>
* This is the same as "g.command", but splits the result
* into a list of lines.
- *
+ * <p>
* Because of the message protocol, there is a transfer
* limit of somewhere between 2MB and 4MB. To transfer
* large files you should use FTP.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] command_lines (String[] arguments)
/**
* get file information
- *
+ * <p>
* Returns file information for the given "path".
- *
+ * <p>
* This is the same as the stat(2) system call.
- *
+ * <p>
* @throws LibGuestFSException
*/
public Stat stat (String path)
/**
* get file information for a symbolic link
- *
+ * <p>
* Returns file information for the given "path".
- *
+ * <p>
* This is the same as "g.stat" except that if "path" is a
* symbolic link, then the link is stat-ed, not the file it
* refers to.
- *
+ * <p>
* This is the same as the lstat(2) system call.
- *
+ * <p>
* @throws LibGuestFSException
*/
public Stat lstat (String path)
/**
* get file system statistics
- *
+ * <p>
* Returns file system statistics for any mounted file
* system. "path" should be a file or directory in the
* mounted file system (typically it is the mount point
* itself, but it doesn't need to be).
- *
+ * <p>
* This is the same as the statvfs(2) system call.
- *
+ * <p>
* @throws LibGuestFSException
*/
public StatVFS statvfs (String path)
/**
* get ext2/ext3/ext4 superblock details
- *
+ * <p>
* This returns the contents of the ext2, ext3 or ext4
* filesystem superblock on "device".
- *
+ * <p>
* It is the same as running "tune2fs -l device". See
* tune2fs(8) manpage for more details. The list of fields
* returned isn't clearly defined, and depends on both the
* version of "tune2fs" that libguestfs was built against,
* and the filesystem itself.
- *
+ * <p>
* @throws LibGuestFSException
*/
public HashMap<String,String> tune2fs_l (String device)
/**
* set block device to read-only
- *
+ * <p>
* Sets the block device named "device" to read-only.
- *
+ * <p>
* This uses the blockdev(8) command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void blockdev_setro (String device)
/**
* set block device to read-write
- *
+ * <p>
* Sets the block device named "device" to read-write.
- *
+ * <p>
* This uses the blockdev(8) command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void blockdev_setrw (String device)
/**
* is block device set to read-only
- *
+ * <p>
* Returns a boolean indicating if the block device is
* read-only (true if read-only, false if not).
- *
+ * <p>
* This uses the blockdev(8) command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean blockdev_getro (String device)
/**
* get sectorsize of block device
- *
+ * <p>
* This returns the size of sectors on a block device.
* Usually 512, but can be larger for modern devices.
- *
+ * <p>
* (Note, this is not the size in sectors, use
* "g.blockdev_getsz" for that).
- *
+ * <p>
* This uses the blockdev(8) command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public int blockdev_getss (String device)
/**
* get blocksize of block device
- *
+ * <p>
* This returns the block size of a device.
- *
+ * <p>
* (Note this is different from both *size in blocks* and
* *filesystem block size*).
- *
+ * <p>
* This uses the blockdev(8) command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public int blockdev_getbsz (String device)
/**
* set blocksize of block device
- *
+ * <p>
* This sets the block size of a device.
- *
+ * <p>
* (Note this is different from both *size in blocks* and
* *filesystem block size*).
- *
+ * <p>
* This uses the blockdev(8) command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void blockdev_setbsz (String device, int blocksize)
/**
* get total size of device in 512-byte sectors
- *
+ * <p>
* This returns the size of the device in units of 512-byte
* sectors (even if the sectorsize isn't 512 bytes ...
* weird).
- *
+ * <p>
* See also "g.blockdev_getss" for the real sector size of
* the device, and "g.blockdev_getsize64" for the more
* useful *size in bytes*.
- *
+ * <p>
* This uses the blockdev(8) command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public long blockdev_getsz (String device)
/**
* get total size of device in bytes
- *
+ * <p>
* This returns the size of the device in bytes.
- *
+ * <p>
* See also "g.blockdev_getsz".
- *
+ * <p>
* This uses the blockdev(8) command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public long blockdev_getsize64 (String device)
/**
* flush device buffers
- *
+ * <p>
* This tells the kernel to flush internal buffers
* associated with "device".
- *
+ * <p>
* This uses the blockdev(8) command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void blockdev_flushbufs (String device)
/**
* reread partition table
- *
+ * <p>
* Reread the partition table on "device".
- *
+ * <p>
* This uses the blockdev(8) command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void blockdev_rereadpt (String device)
/**
* upload a file from the local machine
- *
+ * <p>
* Upload local file "filename" to "remotefilename" on the
* filesystem.
- *
+ * <p>
* "filename" can also be a named pipe.
- *
+ * <p>
* See also "g.download".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void upload (String filename, String remotefilename)
/**
* download a file to the local machine
- *
+ * <p>
* Download file "remotefilename" and save it as "filename"
* on the local machine.
- *
+ * <p>
* "filename" can also be a named pipe.
- *
+ * <p>
* See also "g.upload", "g.cat".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void download (String remotefilename, String filename)
/**
* compute MD5, SHAx or CRC checksum of file
- *
+ * <p>
* This call computes the MD5, SHAx or CRC checksum of the
* file named "path".
- *
+ * <p>
* The type of checksum to compute is given by the
* "csumtype" parameter which must have one of the
* following values:
- *
+ * <p>
* "crc"
* Compute the cyclic redundancy check (CRC) specified
* by POSIX for the "cksum" command.
- *
+ * <p>
* "md5"
* Compute the MD5 hash (using the "md5sum" program).
- *
+ * <p>
* "sha1"
* Compute the SHA1 hash (using the "sha1sum" program).
- *
+ * <p>
* "sha224"
* Compute the SHA224 hash (using the "sha224sum"
* program).
- *
+ * <p>
* "sha256"
* Compute the SHA256 hash (using the "sha256sum"
* program).
- *
+ * <p>
* "sha384"
* Compute the SHA384 hash (using the "sha384sum"
* program).
- *
+ * <p>
* "sha512"
* Compute the SHA512 hash (using the "sha512sum"
* program).
- *
+ * <p>
* The checksum is returned as a printable string.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String checksum (String csumtype, String path)
/**
* unpack tarfile to directory
- *
+ * <p>
* This command uploads and unpacks local file "tarfile"
* (an *uncompressed* tar file) into "directory".
- *
+ * <p>
* To upload a compressed tarball, use "g.tgz_in".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void tar_in (String tarfile, String directory)
/**
* pack directory into tarfile
- *
+ * <p>
* This command packs the contents of "directory" and
* downloads it to local file "tarfile".
- *
+ * <p>
* To download a compressed tarball, use "g.tgz_out".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void tar_out (String directory, String tarfile)
/**
* unpack compressed tarball to directory
- *
+ * <p>
* This command uploads and unpacks local file "tarball" (a
* *gzip compressed* tar file) into "directory".
- *
+ * <p>
* To upload an uncompressed tarball, use "g.tar_in".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void tgz_in (String tarball, String directory)
/**
* pack directory into compressed tarball
- *
+ * <p>
* This command packs the contents of "directory" and
* downloads it to local file "tarball".
- *
+ * <p>
* To download an uncompressed tarball, use "g.tar_out".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void tgz_out (String directory, String tarball)
/**
* mount a guest disk, read-only
- *
+ * <p>
* This is the same as the "g.mount" command, but it mounts
* the filesystem with the read-only (*-o ro*) flag.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void mount_ro (String device, String mountpoint)
/**
* mount a guest disk with mount options
- *
+ * <p>
* This is the same as the "g.mount" command, but it allows
* you to set the mount options as for the mount(8) *-o*
* flag.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void mount_options (String options, String device, String mountpoint)
/**
* mount a guest disk with mount options and vfstype
- *
+ * <p>
* This is the same as the "g.mount" command, but it allows
* you to set both the mount options and the vfstype as for
* the mount(8) *-o* and *-t* flags.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void mount_vfs (String options, String vfstype, String device, String mountpoint)
/**
* debugging and internals
- *
+ * <p>
* The "g.debug" command exposes some internals of
* "guestfsd" (the guestfs daemon) that runs inside the
* qemu subprocess.
- *
+ * <p>
* There is no comprehensive help for this command. You
* have to look at the file "daemon/debug.c" in the
* libguestfs source to find out what you can do.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String debug (String subcmd, String[] extraargs)
/**
* remove an LVM logical volume
- *
+ * <p>
* Remove an LVM logical volume "device", where "device" is
* the path to the LV, such as "/dev/VG/LV".
- *
+ * <p>
* You can also remove all LVs in a volume group by
* specifying the VG name, "/dev/VG".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void lvremove (String device)
/**
* remove an LVM volume group
- *
+ * <p>
* Remove an LVM volume group "vgname", (for example "VG").
- *
+ * <p>
* This also forcibly removes all logical volumes in the
* volume group (if any).
- *
+ * <p>
* @throws LibGuestFSException
*/
public void vgremove (String vgname)
/**
* remove an LVM physical volume
- *
+ * <p>
* This wipes a physical volume "device" so that LVM will
* no longer recognise it.
- *
+ * <p>
* The implementation uses the "pvremove" command which
* refuses to wipe physical volumes that contain any volume
* groups, so you have to remove those first.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void pvremove (String device)
/**
* set the ext2/3/4 filesystem label
- *
+ * <p>
* This sets the ext2/3/4 filesystem label of the
* filesystem on "device" to "label". Filesystem labels are
* limited to 16 characters.
- *
+ * <p>
* You can use either "g.tune2fs_l" or "g.get_e2label" to
* return the existing label on a filesystem.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void set_e2label (String device, String label)
/**
* get the ext2/3/4 filesystem label
- *
+ * <p>
* This returns the ext2/3/4 filesystem label of the
* filesystem on "device".
- *
+ * <p>
* @throws LibGuestFSException
*/
public String get_e2label (String device)
/**
* set the ext2/3/4 filesystem UUID
- *
+ * <p>
* This sets the ext2/3/4 filesystem UUID of the filesystem
* on "device" to "uuid". The format of the UUID and
* alternatives such as "clear", "random" and "time" are
* described in the tune2fs(8) manpage.
- *
+ * <p>
* You can use either "g.tune2fs_l" or "g.get_e2uuid" to
* return the existing UUID of a filesystem.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void set_e2uuid (String device, String uuid)
/**
* get the ext2/3/4 filesystem UUID
- *
+ * <p>
* This returns the ext2/3/4 filesystem UUID of the
* filesystem on "device".
- *
+ * <p>
* @throws LibGuestFSException
*/
public String get_e2uuid (String device)
/**
* run the filesystem checker
- *
+ * <p>
* This runs the filesystem checker (fsck) on "device"
* which should have filesystem type "fstype".
- *
+ * <p>
* The returned integer is the status. See fsck(8) for the
* list of status codes from "fsck".
- *
+ * <p>
* Notes:
- *
+ * <p>
* * Multiple status codes can be summed together.
- *
+ * <p>
* * A non-zero return code can mean "success", for
* example if errors have been corrected on the
* filesystem.
- *
+ * <p>
* * Checking or repairing NTFS volumes is not supported
* (by linux-ntfs).
- *
+ * <p>
* This command is entirely equivalent to running "fsck -a
* -t fstype device".
- *
+ * <p>
* @throws LibGuestFSException
*/
public int fsck (String fstype, String device)
/**
* write zeroes to the device
- *
+ * <p>
* This command writes zeroes over the first few blocks of
* "device".
- *
+ * <p>
* How many blocks are zeroed isn't specified (but it's
* *not* enough to securely wipe the device). It should be
* sufficient to remove any partition tables, filesystem
* superblocks and so on.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void zero (String device)
/**
* install GRUB
- *
+ * <p>
* This command installs GRUB (the Grand Unified
* Bootloader) on "device", with the root directory being
* "root".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void grub_install (String root, String device)
/**
* copy a file
- *
+ * <p>
* This copies a file from "src" to "dest" where "dest" is
* either a destination filename or destination directory.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void cp (String src, String dest)
/**
* copy a file or directory recursively
- *
+ * <p>
* This copies a file or directory from "src" to "dest"
* recursively using the "cp -a" command.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void cp_a (String src, String dest)
/**
* move a file
- *
+ * <p>
* This moves a file from "src" to "dest" where "dest" is
* either a destination filename or destination directory.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void mv (String src, String dest)
/**
* drop kernel page cache, dentries and inodes
- *
+ * <p>
* This instructs the guest kernel to drop its page cache,
* and/or dentries and inode caches. The parameter
* "whattodrop" tells the kernel what precisely to drop,
* see <http://linux-mm.org/Drop_Caches>
- *
+ * <p>
* Setting "whattodrop" to 3 should drop everything.
- *
+ * <p>
* This automatically calls sync(2) before the operation,
* so that the maximum guest memory is freed.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void drop_caches (int whattodrop)
/**
* return kernel messages
- *
+ * <p>
* This returns the kernel messages ("dmesg" output) from
* the guest kernel. This is sometimes useful for extended
* debugging of problems.
- *
+ * <p>
* Another way to get the same information is to enable
* verbose messages with "g.set_verbose" or by setting the
* environment variable "LIBGUESTFS_DEBUG=1" before running
* the program.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String dmesg ()
/**
* ping the guest daemon
- *
+ * <p>
* This is a test probe into the guestfs daemon running
* inside the qemu subprocess. Calling this function checks
* that the daemon responds to the ping message, without
* affecting the daemon or attached block device(s) in any
* other way.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void ping_daemon ()
/**
* test if two files have equal contents
- *
+ * <p>
* This compares the two files "file1" and "file2" and
* returns true if their content is exactly equal, or false
* otherwise.
- *
+ * <p>
* The external cmp(1) program is used for the comparison.
- *
+ * <p>
* @throws LibGuestFSException
*/
public boolean equal (String file1, String file2)
/**
* print the printable strings in a file
- *
+ * <p>
* This runs the strings(1) command on a file and returns
* the list of printable strings found.
- *
+ * <p>
* Because of the message protocol, there is a transfer
* limit of somewhere between 2MB and 4MB. To transfer
* large files you should use FTP.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] strings (String path)
/**
* print the printable strings in a file
- *
+ * <p>
* This is like the "g.strings" command, but allows you to
* specify the encoding.
- *
+ * <p>
* See the strings(1) manpage for the full list of
* encodings.
- *
+ * <p>
* Commonly useful encodings are "l" (lower case L) which
* will show strings inside Windows/x86 files.
- *
+ * <p>
* The returned strings are transcoded to UTF-8.
- *
+ * <p>
* Because of the message protocol, there is a transfer
* limit of somewhere between 2MB and 4MB. To transfer
* large files you should use FTP.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] strings_e (String encoding, String path)
/**
* dump a file in hexadecimal
- *
+ * <p>
* This runs "hexdump -C" on the given "path". The result
* is the human-readable, canonical hex dump of the file.
- *
+ * <p>
* Because of the message protocol, there is a transfer
* limit of somewhere between 2MB and 4MB. To transfer
* large files you should use FTP.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String hexdump (String path)
/**
* zero unused inodes and disk blocks on ext2/3 filesystem
- *
+ * <p>
* This runs the *zerofree* program on "device". This
* program claims to zero unused inodes and disk blocks on
* an ext2/3 filesystem, thus making it possible to
* compress the filesystem more effectively.
- *
+ * <p>
* You should not run this program if the filesystem is
* mounted.
- *
+ * <p>
* It is possible that using this program can damage the
* filesystem or data on the filesystem.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void zerofree (String device)
/**
* resize an LVM physical volume
- *
+ * <p>
* This resizes (expands or shrinks) an existing LVM
* physical volume to match the new size of the underlying
* device.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void pvresize (String device)
/**
* modify a single partition on a block device
- *
+ * <p>
* This runs sfdisk(8) option to modify just the single
* partition "n" (note: "n" counts from 1).
- *
+ * <p>
* For other parameters, see "g.sfdisk". You should usually
* pass 0 for the cyls/heads/sectors parameters.
- *
+ * <p>
* This command is dangerous. Without careful use you can
* easily destroy all your data.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void sfdisk_N (String device, int n, int cyls, int heads, int sectors, String line)
/**
* display the partition table
- *
+ * <p>
* This displays the partition table on "device", in the
* human-readable output of the sfdisk(8) command. It is
* not intended to be parsed.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String sfdisk_l (String device)
/**
* display the kernel geometry
- *
+ * <p>
* This displays the kernel's idea of the geometry of
* "device".
- *
+ * <p>
* The result is in human-readable format, and not designed
* to be parsed.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String sfdisk_kernel_geometry (String device)
/**
* display the disk geometry from the partition table
- *
+ * <p>
* This displays the disk geometry of "device" read from
* the partition table. Especially in the case where the
* underlying block device has been resized, this can be
* different from the kernel's idea of the geometry (see
* "g.sfdisk_kernel_geometry").
- *
+ * <p>
* The result is in human-readable format, and not designed
* to be parsed.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String sfdisk_disk_geometry (String device)
/**
* activate or deactivate all volume groups
- *
+ * <p>
* This command activates or (if "activate" is false)
* deactivates all logical volumes in all volume groups. If
* activated, then they are made known to the kernel, ie.
* they appear as "/dev/mapper" devices. If deactivated,
* then those devices disappear.
- *
+ * <p>
* This command is the same as running "vgchange -a y|n"
- *
+ * <p>
* @throws LibGuestFSException
*/
public void vg_activate_all (boolean activate)
/**
* activate or deactivate some volume groups
- *
+ * <p>
* This command activates or (if "activate" is false)
* deactivates all logical volumes in the listed volume
* groups "volgroups". If activated, then they are made
* known to the kernel, ie. they appear as "/dev/mapper"
* devices. If deactivated, then those devices disappear.
- *
+ * <p>
* This command is the same as running "vgchange -a y|n
* volgroups..."
- *
+ * <p>
* Note that if "volgroups" is an empty list then all
* volume groups are activated or deactivated.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void vg_activate (boolean activate, String[] volgroups)
/**
* resize an LVM logical volume
- *
+ * <p>
* This resizes (expands or shrinks) an existing LVM
* logical volume to "mbytes". When reducing, data in the
* reduced part is lost.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void lvresize (String device, int mbytes)
/**
* resize an ext2/ext3 filesystem
- *
+ * <p>
* This resizes an ext2 or ext3 filesystem to match the
* size of the underlying device.
- *
+ * <p>
* *Note:* It is sometimes required that you run
* "g.e2fsck_f" on the "device" before calling this
* command. For unknown reasons "resize2fs" sometimes gives
* an error about this and sometimes not. In any case, it
* is always safe to call "g.e2fsck_f" before calling this
* function.
- *
+ * <p>
* @throws LibGuestFSException
*/
public void resize2fs (String device)
/**
* find all files and directories
- *
+ * <p>
* This command lists out all files and directories,
* recursively, starting at "directory". It is essentially
* equivalent to running the shell command "find directory
* -print" but some post-processing happens on the output,
* described below.
- *
+ * <p>
* This returns a list of strings *without any prefix*.
* Thus if the directory structure was:
- *
+ * <p>
* /tmp/a
* /tmp/b
* /tmp/c/d
- *
+ * <p>
* then the returned list from "g.find" "/tmp" would be 4
* elements:
- *
+ * <p>
* a
* b
* c
* c/d
- *
+ * <p>
* If "directory" is not a directory, then this command
* returns an error.
- *
+ * <p>
* The returned list is sorted.
- *
+ * <p>
* @throws LibGuestFSException
*/
public String[] find (String directory)
/**
* check an ext2/ext3 filesystem
- *
+ * <p>
* This runs "e2fsck -p -f device", ie. runs the ext2/ext3
* filesystem checker on "device", noninteractively ("-p"),
* even if the filesystem appears to be clean ("-f").
- *
+ * <p>
* This command is only needed because of "g.resize2fs"
* (q.v.). Normally you should use "g.fsck".
- *
+ * <p>
* @throws LibGuestFSException
*/
public void e2fsck_f (String device)
git.annexia.org / libguestfs.git / blobdiff