in the context of the guest. Also you can access filesystems over FTP.
Libguestfs is a library that can be linked with C and C++ management
-programs (or management programs written in OCaml, Perl or Python).
-You can also use it from shell scripts or the command line.
+programs (or management programs written in OCaml, Perl, Python, Ruby, Java
+or Haskell). You can also use it from shell scripts or the command line.
You don't need to be root to use libguestfs, although obviously you do
need enough permissions to access the disk images.
This isn't documented. Please see the libguestfs-select and
libguestfs-glib implementations.
+=head1 INTERNALS
+
+=head2 COMMUNICATION PROTOCOL
+
+Don't rely on using this protocol directly. This section documents
+how it currently works, but it may change at any time.
+
+The protocol used to talk between the library and the daemon running
+inside the qemu virtual machine is a simple RPC mechanism built on top
+of XDR (RFC 1014, RFC 1832, RFC 4506).
+
+The detailed format of structures is in C<src/guestfs_protocol.x>
+(note: this file is automatically generated).
+
+There are two broad cases, ordinary functions that don't have any
+C<FileIn> and C<FileOut> parameters, which are handled with very
+simple request/reply messages. Then there are functions that have any
+C<FileIn> or C<FileOut> parameters, which use the same request and
+reply messages, but they may also be followed by files sent using a
+chunked encoding.
+
+=head3 ORDINARY FUNCTIONS (NO FILEIN/FILEOUT PARAMS)
+
+For ordinary functions, the request message is:
+
+ total length (header + arguments,
+ but not including the length word itself)
+ struct guestfs_message_header (encoded as XDR)
+ struct guestfs_<foo>_args (encoded as XDR)
+
+The total length field allows the daemon to allocate a fixed size
+buffer into which it slurps the rest of the message. As a result, the
+total length is limited to C<GUESTFS_MESSAGE_MAX> bytes (currently
+4MB), which means the effective size of any request is limited to
+somewhere under this size.
+
+Note also that many functions don't take any arguments, in which case
+the C<guestfs_I<foo>_args> is completely omitted.
+
+The header contains the procedure number (C<guestfs_proc>) which is
+how the receiver knows what type of args structure to expect, or none
+at all.
+
+The reply message for ordinary functions is:
+
+ total length (header + ret,
+ but not including the length word itself)
+ struct guestfs_message_header (encoded as XDR)
+ struct guestfs_<foo>_ret (encoded as XDR)
+
+As above the C<guestfs_I<foo>_ret> structure may be completely omitted
+for functions that return no formal return values.
+
+As above the total length of the reply is limited to
+C<GUESTFS_MESSAGE_MAX>.
+
+In the case of an error, a flag is set in the header, and the reply
+message is slightly changed:
+
+ total length (header + error,
+ but not including the length word itself)
+ struct guestfs_message_header (encoded as XDR)
+ struct guestfs_message_error (encoded as XDR)
+
+The C<guestfs_message_error> structure contains the error message as a
+string.
+
+=head3 FUNCTIONS THAT HAVE FILEIN PARAMETERS
+
+A C<FileIn> parameter indicates that we transfer a file I<into> the
+guest. The normal request message is sent (see above). However this
+is followed by a sequence of file chunks.
+
+ total length (header + arguments,
+ but not including the length word itself,
+ and not including the chunks)
+ struct guestfs_message_header (encoded as XDR)
+ struct guestfs_<foo>_args (encoded as XDR)
+ sequence of chunks for FileIn param #0
+ sequence of chunks for FileIn param #1 etc.
+
+The "sequence of chunks" is:
+
+ length of chunk (not including length word itself)
+ struct guestfs_chunk (encoded as XDR)
+ length of chunk
+ struct guestfs_chunk (encoded as XDR)
+ ...
+ length of chunk
+ struct guestfs_chunk (with data.data_len == 0)
+
+The final chunk has the C<data_len> field set to zero. Additionally a
+flag is set in the final chunk to indicate either successful
+completion or early cancellation.
+
+At time of writing there are no functions that have more than one
+FileIn parameter. However this is (theoretically) supported, by
+sending the sequence of chunks for each FileIn parameter one after
+another (from left to right).
+
+Both the library (sender) I<and> the daemon (receiver) may cancel the
+transfer. The library does this by sending a chunk with a special
+flag set to indicate cancellation. When the daemon sees this, it
+cancels the whole RPC, does I<not> send any reply, and goes back to
+reading the next request.
+
+The daemon may also cancel. It does this by writing a special word
+C<GUESTFS_CANCEL_FLAG> to the socket. The library listens for this
+during the transfer, and if it gets it, it will cancel the transfer
+(it sends a cancel chunk). The special word is chosen so that even if
+cancellation happens right at the end of the transfer (after the
+library has finished writing and has started listening for the reply),
+the "spurious" cancel flag will not be confused with the reply
+message.
+
+This protocol allows the transfer of arbitrary sized files (no 32 bit
+limit), and also files where the size is not known in advance
+(eg. from pipes or sockets). However the chunks are rather small
+(C<GUESTFS_MAX_CHUNK_SIZE>), so that neither the library nor the
+daemon need to keep much in memory.
+
+=head3 FUNCTIONS THAT HAVE FILEOUT PARAMETERS
+
+The protocol for FileOut parameters is exactly the same as for FileIn
+parameters, but with the roles of daemon and library reversed.
+
+ total length (header + ret,
+ but not including the length word itself,
+ and not including the chunks)
+ struct guestfs_message_header (encoded as XDR)
+ struct guestfs_<foo>_ret (encoded as XDR)
+ sequence of chunks for FileOut param #0
+ sequence of chunks for FileOut param #1 etc.
+
+=head3 INITIAL MESSAGE
+
+Because the underlying channel (QEmu -net channel) doesn't have any
+sort of connection control, when the daemon launches it sends an
+initial word (C<GUESTFS_LAUNCH_FLAG>) which indicates that the guest
+and daemon is alive. This is what C<guestfs_wait_ready> waits for.
+
+=head1 QEMU WRAPPERS
+
+If you want to compile your own qemu, run qemu from a non-standard
+location, or pass extra arguments to qemu, then you can write a
+shell-script wrapper around qemu.
+
+There is one important rule to remember: you I<must C<exec qemu>> as
+the last command in the shell script (so that qemu replaces the shell
+and becomes the direct child of the libguestfs-using program). If you
+don't do this, then the qemu process won't be cleaned up correctly.
+
+Here is an example of a wrapper, where I have built my own copy of
+qemu from source:
+
+ #!/bin/sh -
+ qemudir=/home/rjones/d/qemu
+ exec $qemudir/x86_64-softmmu/qemu-system-x86_64 -L $qemudir/pc-bios "$@"
+
+Save this script as C</tmp/qemu.wrapper> (or wherever), C<chmod +x>,
+and then use it by setting the LIBGUESTFS_QEMU environment variable.
+For example:
+
+ LIBGUESTFS_QEMU=/tmp/qemu.wrapper guestfish
+
=head1 ENVIRONMENT VARIABLES
=over 4
Set the path that libguestfs uses to search for kernel and initrd.img.
See the discussion of paths in section PATH above.
+=item LIBGUESTFS_QEMU
+
+Set the default qemu binary that libguestfs uses. If not set, then
+the qemu which was found at compile time by the configure script is
+used.
+
+See also L<QEMU WRAPPERS> above.
+
+=item LIBGUESTFS_APPEND
+
+Pass additional options to the guest kernel.
+
=back
=head1 SEE ALSO
git.annexia.org / libguestfs.git / blobdiff