printf ("%-20s %s\n", "aug-rm", "remove an Augeas path");
printf ("%-20s %s\n", "aug-save", "write all pending Augeas changes to disk");
printf ("%-20s %s\n", "aug-set", "set Augeas path to value");
+ printf ("%-20s %s\n", "blockdev-flushbufs", "flush device buffers");
+ printf ("%-20s %s\n", "blockdev-getbsz", "get blocksize of block device");
+ printf ("%-20s %s\n", "blockdev-getro", "is block device set to read-only");
+ printf ("%-20s %s\n", "blockdev-getsize64", "get total size of device in bytes");
+ printf ("%-20s %s\n", "blockdev-getss", "get sectorsize of block device");
+ printf ("%-20s %s\n", "blockdev-getsz", "get total size of device in 512-byte sectors");
+ printf ("%-20s %s\n", "blockdev-rereadpt", "reread partition table");
+ printf ("%-20s %s\n", "blockdev-setbsz", "set blocksize of block device");
+ printf ("%-20s %s\n", "blockdev-setro", "set block device to read-only");
+ printf ("%-20s %s\n", "blockdev-setrw", "set block device to read-write");
printf ("%-20s %s\n", "cat", "list the contents of a file");
+ printf ("%-20s %s\n", "checksum", "compute MD5, SHAx or CRC checksum of file");
printf ("%-20s %s\n", "chmod", "change file mode");
printf ("%-20s %s\n", "chown", "change file owner and group");
printf ("%-20s %s\n", "command", "run a command from the guest filesystem");
printf ("%-20s %s\n", "command-lines", "run a command, returning lines");
printf ("%-20s %s\n", "config", "add qemu parameters");
+ printf ("%-20s %s\n", "debug", "debugging and internals");
+ printf ("%-20s %s\n", "download", "download a file to the local machine");
printf ("%-20s %s\n", "exists", "test if file or directory exists");
printf ("%-20s %s\n", "file", "determine file type");
printf ("%-20s %s\n", "get-autosync", "get autosync mode");
printf ("%-20s %s\n", "get-path", "get the search path");
+ printf ("%-20s %s\n", "get-qemu", "get the qemu binary");
+ printf ("%-20s %s\n", "get-state", "get the current state");
printf ("%-20s %s\n", "get-verbose", "get verbose mode");
+ printf ("%-20s %s\n", "is-busy", "is busy processing a command");
+ printf ("%-20s %s\n", "is-config", "is in configuration state");
printf ("%-20s %s\n", "is-dir", "test if file exists");
printf ("%-20s %s\n", "is-file", "test if file exists");
+ printf ("%-20s %s\n", "is-launching", "is launching subprocess");
+ printf ("%-20s %s\n", "is-ready", "is ready to accept commands");
printf ("%-20s %s\n", "kill-subprocess", "kill the qemu subprocess");
printf ("%-20s %s\n", "launch", "launch the qemu subprocess");
printf ("%-20s %s\n", "list-devices", "list the block devices");
printf ("%-20s %s\n", "list-partitions", "list the partitions");
printf ("%-20s %s\n", "ll", "list the files in a directory (long format)");
printf ("%-20s %s\n", "ls", "list the files in a directory");
+ printf ("%-20s %s\n", "lstat", "get file information for a symbolic link");
printf ("%-20s %s\n", "lvcreate", "create an LVM volume group");
printf ("%-20s %s\n", "lvm-remove-all", "remove all LVM LVs, VGs and PVs");
+ printf ("%-20s %s\n", "lvremove", "remove an LVM logical volume");
printf ("%-20s %s\n", "lvs", "list the LVM logical volumes (LVs)");
printf ("%-20s %s\n", "lvs-full", "list the LVM logical volumes (LVs)");
printf ("%-20s %s\n", "mkdir", "create a directory");
printf ("%-20s %s\n", "mkdir-p", "create a directory and parents");
printf ("%-20s %s\n", "mkfs", "make a filesystem");
printf ("%-20s %s\n", "mount", "mount a guest disk at a position in the filesystem");
+ printf ("%-20s %s\n", "mount-options", "mount a guest disk with mount options");
+ printf ("%-20s %s\n", "mount-ro", "mount a guest disk, read-only");
+ printf ("%-20s %s\n", "mount-vfs", "mount a guest disk with mount options and vfstype");
printf ("%-20s %s\n", "mounts", "show mounted filesystems");
printf ("%-20s %s\n", "pvcreate", "create an LVM physical volume");
+ printf ("%-20s %s\n", "pvremove", "remove an LVM physical volume");
printf ("%-20s %s\n", "pvs", "list the LVM physical volumes (PVs)");
printf ("%-20s %s\n", "pvs-full", "list the LVM physical volumes (PVs)");
printf ("%-20s %s\n", "read-lines", "read file as lines");
printf ("%-20s %s\n", "rmdir", "remove a directory");
printf ("%-20s %s\n", "set-autosync", "set autosync mode");
printf ("%-20s %s\n", "set-path", "set the search path");
+ printf ("%-20s %s\n", "set-qemu", "set the qemu binary");
printf ("%-20s %s\n", "set-verbose", "set verbose mode");
printf ("%-20s %s\n", "sfdisk", "create partitions on a block device");
+ printf ("%-20s %s\n", "stat", "get file information");
+ printf ("%-20s %s\n", "statvfs", "get file system statistics");
printf ("%-20s %s\n", "sync", "sync disks, writes are flushed through to the disk image");
+ printf ("%-20s %s\n", "tar-in", "unpack tarfile to directory");
+ printf ("%-20s %s\n", "tar-out", "pack directory into tarfile");
+ printf ("%-20s %s\n", "tgz-in", "unpack compressed tarball to directory");
+ printf ("%-20s %s\n", "tgz-out", "pack directory into compressed tarball");
printf ("%-20s %s\n", "touch", "update file timestamps or create a new file");
+ printf ("%-20s %s\n", "tune2fs-l", "get ext2/ext3/ext4 superblock details");
printf ("%-20s %s\n", "umount", "unmount a filesystem");
printf ("%-20s %s\n", "umount-all", "unmount all filesystems");
+ printf ("%-20s %s\n", "upload", "upload a file from the local machine");
printf ("%-20s %s\n", "vgcreate", "create an LVM volume group");
+ printf ("%-20s %s\n", "vgremove", "remove an LVM volume group");
printf ("%-20s %s\n", "vgs", "list the LVM volume groups (VGs)");
printf ("%-20s %s\n", "vgs-full", "list the LVM volume groups (VGs)");
printf ("%-20s %s\n", "write-file", "create a file");
if (strcasecmp (cmd, "config") == 0)
pod2text ("config - add qemu parameters", " config <qemuparam> <qemuvalue>\n\nThis can be used to add arbitrary qemu command line parameters\nof the form C<-param value>. Actually it's not quite arbitrary - we\nprevent you from setting some parameters which would interfere with\nparameters that we use.\n\nThe first character of C<param> string must be a C<-> (dash).\n\nC<value> can be NULL.");
else
+ if (strcasecmp (cmd, "set_qemu") == 0 || strcasecmp (cmd, "set-qemu") == 0 || strcasecmp (cmd, "qemu") == 0)
+ pod2text ("set-qemu - set the qemu binary", " set-qemu <qemu>\n\nSet the qemu binary that we will use.\n\nThe default is chosen when the library was compiled by the\nconfigure script.\n\nYou can also override this by setting the C<LIBGUESTFS_QEMU>\nenvironment variable.\n\nThe string C<qemu> is stashed in the libguestfs handle, so the caller\nmust make sure it remains valid for the lifetime of the handle.\n\nSetting C<qemu> to C<NULL> restores the default qemu binary.\n\nYou can use 'qemu' as an alias for this command.");
+ else
+ if (strcasecmp (cmd, "get_qemu") == 0 || strcasecmp (cmd, "get-qemu") == 0)
+ pod2text ("get-qemu - get the qemu binary", " get-qemu\n\nReturn the current qemu binary.\n\nThis is always non-NULL. If it wasn't set already, then this will\nreturn the default qemu binary name.");
+ else
if (strcasecmp (cmd, "set_path") == 0 || strcasecmp (cmd, "set-path") == 0 || strcasecmp (cmd, "path") == 0)
pod2text ("set-path - set the search path", " set-path <path>\n\nSet the path that libguestfs searches for kernel and initrd.img.\n\nThe default is C<$libdir/guestfs> unless overridden by setting\nC<LIBGUESTFS_PATH> environment variable.\n\nThe string C<path> is stashed in the libguestfs handle, so the caller\nmust make sure it remains valid for the lifetime of the handle.\n\nSetting C<path> to C<NULL> restores the default path.\n\nYou can use 'path' as an alias for this command.");
else
if (strcasecmp (cmd, "get_verbose") == 0 || strcasecmp (cmd, "get-verbose") == 0)
pod2text ("get-verbose - get verbose mode", " get-verbose\n\nThis returns the verbose messages flag.");
else
+ if (strcasecmp (cmd, "is_ready") == 0 || strcasecmp (cmd, "is-ready") == 0)
+ pod2text ("is-ready - is ready to accept commands", " is-ready\n\nThis returns true iff this handle is ready to accept commands\n(in the C<READY> state).\n\nFor more information on states, see L<guestfs(3)>.");
+ else
+ if (strcasecmp (cmd, "is_config") == 0 || strcasecmp (cmd, "is-config") == 0)
+ pod2text ("is-config - is in configuration state", " is-config\n\nThis returns true iff this handle is being configured\n(in the C<CONFIG> state).\n\nFor more information on states, see L<guestfs(3)>.");
+ else
+ if (strcasecmp (cmd, "is_launching") == 0 || strcasecmp (cmd, "is-launching") == 0)
+ pod2text ("is-launching - is launching subprocess", " is-launching\n\nThis returns true iff this handle is launching the subprocess\n(in the C<LAUNCHING> state).\n\nFor more information on states, see L<guestfs(3)>.");
+ else
+ if (strcasecmp (cmd, "is_busy") == 0 || strcasecmp (cmd, "is-busy") == 0)
+ pod2text ("is-busy - is busy processing a command", " is-busy\n\nThis returns true iff this handle is busy processing a command\n(in the C<BUSY> state).\n\nFor more information on states, see L<guestfs(3)>.");
+ else
+ if (strcasecmp (cmd, "get_state") == 0 || strcasecmp (cmd, "get-state") == 0)
+ pod2text ("get-state - get the current state", " get-state\n\nThis returns the current state as an opaque integer. This is\nonly useful for printing debug and internal error messages.\n\nFor more information on states, see L<guestfs(3)>.");
+ else
if (strcasecmp (cmd, "mount") == 0)
pod2text ("mount - mount a guest disk at a position in the filesystem", " mount <device> <mountpoint>\n\nMount a guest disk at a position in the filesystem. Block devices\nare named C</dev/sda>, C</dev/sdb> and so on, as they were added to\nthe guest. If those block devices contain partitions, they will have\nthe usual names (eg. C</dev/sda1>). Also LVM C</dev/VG/LV>-style\nnames can be used.\n\nThe rules are the same as for L<mount(2)>: A filesystem must\nfirst be mounted on C</> before others can be mounted. Other\nfilesystems can only be mounted on directories which already\nexist.\n\nThe mounted filesystem is writable, if we have sufficient permissions\non the underlying device.\n\nThe filesystem options C<sync> and C<noatime> are set with this\ncall, in order to improve reliability.");
else
pod2text ("touch - update file timestamps or create a new file", " touch <path>\n\nTouch acts like the L<touch(1)> command. It can be used to\nupdate the timestamps on a file, or, if the file does not exist,\nto create a new zero-length file.");
else
if (strcasecmp (cmd, "cat") == 0)
- pod2text ("cat - list the contents of a file", " cat <path>\n\nReturn the contents of the file named C<path>.\n\nNote that this function cannot correctly handle binary files\n(specifically, files containing C<\\0> character which is treated\nas end of string). For those you need to use the C<read_file>\nfunction which has a more complex interface.\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
+ pod2text ("cat - list the contents of a file", " cat <path>\n\nReturn the contents of the file named C<path>.\n\nNote that this function cannot correctly handle binary files\n(specifically, files containing C<\\0> character which is treated\nas end of string). For those you need to use the C<download>\nfunction which has a more complex interface.\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
else
if (strcasecmp (cmd, "ll") == 0)
pod2text ("ll - list the files in a directory (long format)", " ll <directory>\n\nList the files in C<directory> (relative to the root directory,\nthere is no cwd) in the format of 'ls -la'.\n\nThis command is mostly useful for interactive sessions. It\nis I<not> intended that you try to parse the output string.");
if (strcasecmp (cmd, "command_lines") == 0 || strcasecmp (cmd, "command-lines") == 0)
pod2text ("command-lines - run a command, returning lines", " command-lines <arguments>\n\nThis is the same as C<command>, but splits the\nresult into a list of lines.");
else
+ if (strcasecmp (cmd, "stat") == 0)
+ pod2text ("stat - get file information", " stat <path>\n\nReturns file information for the given C<path>.\n\nThis is the same as the C<stat(2)> system call.");
+ else
+ if (strcasecmp (cmd, "lstat") == 0)
+ pod2text ("lstat - get file information for a symbolic link", " lstat <path>\n\nReturns file information for the given C<path>.\n\nThis is the same as C<stat> except that if C<path>\nis a symbolic link, then the link is stat-ed, not the file it\nrefers to.\n\nThis is the same as the C<lstat(2)> system call.");
+ else
+ if (strcasecmp (cmd, "statvfs") == 0)
+ pod2text ("statvfs - get file system statistics", " statvfs <path>\n\nReturns file system statistics for any mounted file system.\nC<path> should be a file or directory in the mounted file system\n(typically it is the mount point itself, but it doesn't need to be).\n\nThis is the same as the C<statvfs(2)> system call.");
+ else
+ if (strcasecmp (cmd, "tune2fs_l") == 0 || strcasecmp (cmd, "tune2fs-l") == 0)
+ pod2text ("tune2fs-l - get ext2/ext3/ext4 superblock details", " tune2fs-l <device>\n\nThis returns the contents of the ext2, ext3 or ext4 filesystem\nsuperblock on C<device>.\n\nIt is the same as running C<tune2fs -l device>. See L<tune2fs(8)>\nmanpage for more details. The list of fields returned isn't\nclearly defined, and depends on both the version of C<tune2fs>\nthat libguestfs was built against, and the filesystem itself.");
+ else
+ if (strcasecmp (cmd, "blockdev_setro") == 0 || strcasecmp (cmd, "blockdev-setro") == 0)
+ pod2text ("blockdev-setro - set block device to read-only", " blockdev-setro <device>\n\nSets the block device named C<device> to read-only.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_setrw") == 0 || strcasecmp (cmd, "blockdev-setrw") == 0)
+ pod2text ("blockdev-setrw - set block device to read-write", " blockdev-setrw <device>\n\nSets the block device named C<device> to read-write.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_getro") == 0 || strcasecmp (cmd, "blockdev-getro") == 0)
+ pod2text ("blockdev-getro - is block device set to read-only", " blockdev-getro <device>\n\nReturns a boolean indicating if the block device is read-only\n(true if read-only, false if not).\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_getss") == 0 || strcasecmp (cmd, "blockdev-getss") == 0)
+ pod2text ("blockdev-getss - get sectorsize of block device", " blockdev-getss <device>\n\nThis returns the size of sectors on a block device.\nUsually 512, but can be larger for modern devices.\n\n(Note, this is not the size in sectors, use C<blockdev_getsz>\nfor that).\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_getbsz") == 0 || strcasecmp (cmd, "blockdev-getbsz") == 0)
+ pod2text ("blockdev-getbsz - get blocksize of block device", " blockdev-getbsz <device>\n\nThis returns the block size of a device.\n\n(Note this is different from both I<size in blocks> and\nI<filesystem block size>).\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_setbsz") == 0 || strcasecmp (cmd, "blockdev-setbsz") == 0)
+ pod2text ("blockdev-setbsz - set blocksize of block device", " blockdev-setbsz <device> <blocksize>\n\nThis sets the block size of a device.\n\n(Note this is different from both I<size in blocks> and\nI<filesystem block size>).\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_getsz") == 0 || strcasecmp (cmd, "blockdev-getsz") == 0)
+ pod2text ("blockdev-getsz - get total size of device in 512-byte sectors", " blockdev-getsz <device>\n\nThis returns the size of the device in units of 512-byte sectors\n(even if the sectorsize isn't 512 bytes ... weird).\n\nSee also C<blockdev_getss> for the real sector size of\nthe device, and C<blockdev_getsize64> for the more\nuseful I<size in bytes>.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_getsize64") == 0 || strcasecmp (cmd, "blockdev-getsize64") == 0)
+ pod2text ("blockdev-getsize64 - get total size of device in bytes", " blockdev-getsize64 <device>\n\nThis returns the size of the device in bytes.\n\nSee also C<blockdev_getsz>.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_flushbufs") == 0 || strcasecmp (cmd, "blockdev-flushbufs") == 0)
+ pod2text ("blockdev-flushbufs - flush device buffers", " blockdev-flushbufs <device>\n\nThis tells the kernel to flush internal buffers associated\nwith C<device>.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_rereadpt") == 0 || strcasecmp (cmd, "blockdev-rereadpt") == 0)
+ pod2text ("blockdev-rereadpt - reread partition table", " blockdev-rereadpt <device>\n\nReread the partition table on C<device>.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "upload") == 0)
+ pod2text ("upload - upload a file from the local machine", " upload <filename> <remotefilename>\n\nUpload local file C<filename> to C<remotefilename> on the\nfilesystem.\n\nC<filename> can also be a named pipe.\n\nSee also C<download>.");
+ else
+ if (strcasecmp (cmd, "download") == 0)
+ pod2text ("download - download a file to the local machine", " download <remotefilename> <filename>\n\nDownload file C<remotefilename> and save it as C<filename>\non the local machine.\n\nC<filename> can also be a named pipe.\n\nSee also C<upload>, C<cat>.");
+ else
+ if (strcasecmp (cmd, "checksum") == 0)
+ pod2text ("checksum - compute MD5, SHAx or CRC checksum of file", " checksum <csumtype> <path>\n\nThis call computes the MD5, SHAx or CRC checksum of the\nfile named C<path>.\n\nThe type of checksum to compute is given by the C<csumtype>\nparameter which must have one of the following values:\n\n=over 4\n\n=item C<crc>\n\nCompute the cyclic redundancy check (CRC) specified by POSIX\nfor the C<cksum> command.\n\n=item C<md5>\n\nCompute the MD5 hash (using the C<md5sum> program).\n\n=item C<sha1>\n\nCompute the SHA1 hash (using the C<sha1sum> program).\n\n=item C<sha224>\n\nCompute the SHA224 hash (using the C<sha224sum> program).\n\n=item C<sha256>\n\nCompute the SHA256 hash (using the C<sha256sum> program).\n\n=item C<sha384>\n\nCompute the SHA384 hash (using the C<sha384sum> program).\n\n=item C<sha512>\n\nCompute the SHA512 hash (using the C<sha512sum> program).\n\n=back\n\nThe checksum is returned as a printable string.");
+ else
+ if (strcasecmp (cmd, "tar_in") == 0 || strcasecmp (cmd, "tar-in") == 0)
+ pod2text ("tar-in - unpack tarfile to directory", " tar-in <tarfile> <directory>\n\nThis command uploads and unpacks local file C<tarfile> (an\nI<uncompressed> tar file) into C<directory>.\n\nTo upload a compressed tarball, use C<tgz_in>.");
+ else
+ if (strcasecmp (cmd, "tar_out") == 0 || strcasecmp (cmd, "tar-out") == 0)
+ pod2text ("tar-out - pack directory into tarfile", " tar-out <directory> <tarfile>\n\nThis command packs the contents of C<directory> and downloads\nit to local file C<tarfile>.\n\nTo download a compressed tarball, use C<tgz_out>.");
+ else
+ if (strcasecmp (cmd, "tgz_in") == 0 || strcasecmp (cmd, "tgz-in") == 0)
+ pod2text ("tgz-in - unpack compressed tarball to directory", " tgz-in <tarball> <directory>\n\nThis command uploads and unpacks local file C<tarball> (a\nI<gzip compressed> tar file) into C<directory>.\n\nTo upload an uncompressed tarball, use C<tar_in>.");
+ else
+ if (strcasecmp (cmd, "tgz_out") == 0 || strcasecmp (cmd, "tgz-out") == 0)
+ pod2text ("tgz-out - pack directory into compressed tarball", " tgz-out <directory> <tarball>\n\nThis command packs the contents of C<directory> and downloads\nit to local file C<tarball>.\n\nTo download an uncompressed tarball, use C<tar_out>.");
+ else
+ if (strcasecmp (cmd, "mount_ro") == 0 || strcasecmp (cmd, "mount-ro") == 0)
+ pod2text ("mount-ro - mount a guest disk, read-only", " mount-ro <device> <mountpoint>\n\nThis is the same as the C<mount> command, but it\nmounts the filesystem with the read-only (I<-o ro>) flag.");
+ else
+ if (strcasecmp (cmd, "mount_options") == 0 || strcasecmp (cmd, "mount-options") == 0)
+ pod2text ("mount-options - mount a guest disk with mount options", " mount-options <options> <device> <mountpoint>\n\nThis is the same as the C<mount> command, but it\nallows you to set the mount options as for the\nL<mount(8)> I<-o> flag.");
+ else
+ if (strcasecmp (cmd, "mount_vfs") == 0 || strcasecmp (cmd, "mount-vfs") == 0)
+ pod2text ("mount-vfs - mount a guest disk with mount options and vfstype", " mount-vfs <options> <vfstype> <device> <mountpoint>\n\nThis is the same as the C<mount> command, but it\nallows you to set both the mount options and the vfstype\nas for the L<mount(8)> I<-o> and I<-t> flags.");
+ else
+ if (strcasecmp (cmd, "debug") == 0)
+ pod2text ("debug - debugging and internals", " debug <subcmd> <extraargs>\n\nThe C<debug> command exposes some internals of\nC<guestfsd> (the guestfs daemon) that runs inside the\nqemu subprocess.\n\nThere is no comprehensive help for this command. You have\nto look at the file C<daemon/debug.c> in the libguestfs source\nto find out what you can do.");
+ else
+ if (strcasecmp (cmd, "lvremove") == 0)
+ pod2text ("lvremove - remove an LVM logical volume", " lvremove <device>\n\nRemove an LVM logical volume C<device>, where C<device> is\nthe path to the LV, such as C</dev/VG/LV>.\n\nYou can also remove all LVs in a volume group by specifying\nthe VG name, C</dev/VG>.");
+ else
+ if (strcasecmp (cmd, "vgremove") == 0)
+ pod2text ("vgremove - remove an LVM volume group", " vgremove <vgname>\n\nRemove an LVM volume group C<vgname>, (for example C<VG>).\n\nThis also forcibly removes all logical volumes in the volume\ngroup (if any).");
+ else
+ if (strcasecmp (cmd, "pvremove") == 0)
+ pod2text ("pvremove - remove an LVM physical volume", " pvremove <device>\n\nThis wipes a physical volume C<device> so that LVM will no longer\nrecognise it.\n\nThe implementation uses the C<pvremove> command which refuses to\nwipe physical volumes that contain any volume groups, so you have\nto remove those first.");
+ else
display_builtin_command (cmd);
}
print_lv (&lvs->val[i]);
}
+static void print_stat (struct guestfs_stat *stat)
+{
+ printf ("dev: %" PRIi64 "\n", stat->dev);
+ printf ("ino: %" PRIi64 "\n", stat->ino);
+ printf ("mode: %" PRIi64 "\n", stat->mode);
+ printf ("nlink: %" PRIi64 "\n", stat->nlink);
+ printf ("uid: %" PRIi64 "\n", stat->uid);
+ printf ("gid: %" PRIi64 "\n", stat->gid);
+ printf ("rdev: %" PRIi64 "\n", stat->rdev);
+ printf ("size: %" PRIi64 "\n", stat->size);
+ printf ("blksize: %" PRIi64 "\n", stat->blksize);
+ printf ("blocks: %" PRIi64 "\n", stat->blocks);
+ printf ("atime: %" PRIi64 "\n", stat->atime);
+ printf ("mtime: %" PRIi64 "\n", stat->mtime);
+ printf ("ctime: %" PRIi64 "\n", stat->ctime);
+}
+
+static void print_statvfs (struct guestfs_statvfs *statvfs)
+{
+ printf ("bsize: %" PRIi64 "\n", statvfs->bsize);
+ printf ("frsize: %" PRIi64 "\n", statvfs->frsize);
+ printf ("blocks: %" PRIi64 "\n", statvfs->blocks);
+ printf ("bfree: %" PRIi64 "\n", statvfs->bfree);
+ printf ("bavail: %" PRIi64 "\n", statvfs->bavail);
+ printf ("files: %" PRIi64 "\n", statvfs->files);
+ printf ("ffree: %" PRIi64 "\n", statvfs->ffree);
+ printf ("favail: %" PRIi64 "\n", statvfs->favail);
+ printf ("fsid: %" PRIi64 "\n", statvfs->fsid);
+ printf ("flag: %" PRIi64 "\n", statvfs->flag);
+ printf ("namemax: %" PRIi64 "\n", statvfs->namemax);
+}
+
static int run_launch (const char *cmd, int argc, char *argv[])
{
int r;
return r;
}
+static int run_set_qemu (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *qemu;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ qemu = argv[0];
+ r = guestfs_set_qemu (g, qemu);
+ return r;
+}
+
+static int run_get_qemu (const char *cmd, int argc, char *argv[])
+{
+ const char *r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_get_qemu (g);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ return 0;
+}
+
static int run_set_path (const char *cmd, int argc, char *argv[])
{
int r;
return 0;
}
+static int run_is_ready (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_is_ready (g);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_is_config (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_is_config (g);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_is_launching (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_is_launching (g);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_is_busy (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_is_busy (g);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_get_state (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_get_state (g);
+ if (r == -1) return -1;
+ printf ("%d\n", r);
+ return 0;
+}
+
static int run_mount (const char *cmd, int argc, char *argv[])
{
int r;
expr = strcmp (argv[1], "") != 0 ? argv[1] : NULL;
r = guestfs_aug_defvar (g, name, expr);
if (r == -1) return -1;
- if (r) printf ("%d\n", r);
+ printf ("%d\n", r);
return 0;
}
path = argv[0];
r = guestfs_aug_rm (g, path);
if (r == -1) return -1;
- if (r) printf ("%d\n", r);
+ printf ("%d\n", r);
return 0;
}
return 0;
}
+static int run_stat (const char *cmd, int argc, char *argv[])
+{
+ struct guestfs_stat *r;
+ const char *path;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ path = argv[0];
+ r = guestfs_stat (g, path);
+ if (r == NULL) return -1;
+ print_stat (r);
+ free (r);
+ return 0;
+}
+
+static int run_lstat (const char *cmd, int argc, char *argv[])
+{
+ struct guestfs_stat *r;
+ const char *path;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ path = argv[0];
+ r = guestfs_lstat (g, path);
+ if (r == NULL) return -1;
+ print_stat (r);
+ free (r);
+ return 0;
+}
+
+static int run_statvfs (const char *cmd, int argc, char *argv[])
+{
+ struct guestfs_statvfs *r;
+ const char *path;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ path = argv[0];
+ r = guestfs_statvfs (g, path);
+ if (r == NULL) return -1;
+ print_statvfs (r);
+ free (r);
+ return 0;
+}
+
+static int run_tune2fs_l (const char *cmd, int argc, char *argv[])
+{
+ char **r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_tune2fs_l (g, device);
+ if (r == NULL) return -1;
+ print_table (r);
+ free_strings (r);
+ return 0;
+}
+
+static int run_blockdev_setro (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_setro (g, device);
+ return r;
+}
+
+static int run_blockdev_setrw (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_setrw (g, device);
+ return r;
+}
+
+static int run_blockdev_getro (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_getro (g, device);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_blockdev_getss (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_getss (g, device);
+ if (r == -1) return -1;
+ printf ("%d\n", r);
+ return 0;
+}
+
+static int run_blockdev_getbsz (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_getbsz (g, device);
+ if (r == -1) return -1;
+ printf ("%d\n", r);
+ return 0;
+}
+
+static int run_blockdev_setbsz (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ int blocksize;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ blocksize = atoi (argv[1]);
+ r = guestfs_blockdev_setbsz (g, device, blocksize);
+ return r;
+}
+
+static int run_blockdev_getsz (const char *cmd, int argc, char *argv[])
+{
+ int64_t r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_getsz (g, device);
+ if (r == -1) return -1;
+ printf ("%" PRIi64 "\n", r);
+ return 0;
+}
+
+static int run_blockdev_getsize64 (const char *cmd, int argc, char *argv[])
+{
+ int64_t r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_getsize64 (g, device);
+ if (r == -1) return -1;
+ printf ("%" PRIi64 "\n", r);
+ return 0;
+}
+
+static int run_blockdev_flushbufs (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_flushbufs (g, device);
+ return r;
+}
+
+static int run_blockdev_rereadpt (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_rereadpt (g, device);
+ return r;
+}
+
+static int run_upload (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *filename;
+ const char *remotefilename;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ filename = strcmp (argv[0], "-") != 0 ? argv[0] : "/dev/stdin";
+ remotefilename = argv[1];
+ r = guestfs_upload (g, filename, remotefilename);
+ return r;
+}
+
+static int run_download (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *remotefilename;
+ const char *filename;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ remotefilename = argv[0];
+ filename = strcmp (argv[1], "-") != 0 ? argv[1] : "/dev/stdout";
+ r = guestfs_download (g, remotefilename, filename);
+ return r;
+}
+
+static int run_checksum (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *csumtype;
+ const char *path;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ csumtype = argv[0];
+ path = argv[1];
+ r = guestfs_checksum (g, csumtype, path);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_tar_in (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *tarfile;
+ const char *directory;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ tarfile = strcmp (argv[0], "-") != 0 ? argv[0] : "/dev/stdin";
+ directory = argv[1];
+ r = guestfs_tar_in (g, tarfile, directory);
+ return r;
+}
+
+static int run_tar_out (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *directory;
+ const char *tarfile;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ directory = argv[0];
+ tarfile = strcmp (argv[1], "-") != 0 ? argv[1] : "/dev/stdout";
+ r = guestfs_tar_out (g, directory, tarfile);
+ return r;
+}
+
+static int run_tgz_in (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *tarball;
+ const char *directory;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ tarball = strcmp (argv[0], "-") != 0 ? argv[0] : "/dev/stdin";
+ directory = argv[1];
+ r = guestfs_tgz_in (g, tarball, directory);
+ return r;
+}
+
+static int run_tgz_out (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *directory;
+ const char *tarball;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ directory = argv[0];
+ tarball = strcmp (argv[1], "-") != 0 ? argv[1] : "/dev/stdout";
+ r = guestfs_tgz_out (g, directory, tarball);
+ return r;
+}
+
+static int run_mount_ro (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ const char *mountpoint;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ mountpoint = argv[1];
+ r = guestfs_mount_ro (g, device, mountpoint);
+ return r;
+}
+
+static int run_mount_options (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *options;
+ const char *device;
+ const char *mountpoint;
+ if (argc != 3) {
+ fprintf (stderr, "%s should have 3 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ options = argv[0];
+ device = argv[1];
+ mountpoint = argv[2];
+ r = guestfs_mount_options (g, options, device, mountpoint);
+ return r;
+}
+
+static int run_mount_vfs (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *options;
+ const char *vfstype;
+ const char *device;
+ const char *mountpoint;
+ if (argc != 4) {
+ fprintf (stderr, "%s should have 4 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ options = argv[0];
+ vfstype = argv[1];
+ device = argv[2];
+ mountpoint = argv[3];
+ r = guestfs_mount_vfs (g, options, vfstype, device, mountpoint);
+ return r;
+}
+
+static int run_debug (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *subcmd;
+ char **extraargs;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ subcmd = argv[0];
+ extraargs = parse_string_list (argv[1]);
+ r = guestfs_debug (g, subcmd, extraargs);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_lvremove (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_lvremove (g, device);
+ return r;
+}
+
+static int run_vgremove (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *vgname;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ vgname = argv[0];
+ r = guestfs_vgremove (g, vgname);
+ return r;
+}
+
+static int run_pvremove (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_pvremove (g, device);
+ return r;
+}
+
int run_action (const char *cmd, int argc, char *argv[])
{
if (strcasecmp (cmd, "launch") == 0 || strcasecmp (cmd, "run") == 0)
if (strcasecmp (cmd, "config") == 0)
return run_config (cmd, argc, argv);
else
+ if (strcasecmp (cmd, "set_qemu") == 0 || strcasecmp (cmd, "set-qemu") == 0 || strcasecmp (cmd, "qemu") == 0)
+ return run_set_qemu (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_qemu") == 0 || strcasecmp (cmd, "get-qemu") == 0)
+ return run_get_qemu (cmd, argc, argv);
+ else
if (strcasecmp (cmd, "set_path") == 0 || strcasecmp (cmd, "set-path") == 0 || strcasecmp (cmd, "path") == 0)
return run_set_path (cmd, argc, argv);
else
if (strcasecmp (cmd, "get_verbose") == 0 || strcasecmp (cmd, "get-verbose") == 0)
return run_get_verbose (cmd, argc, argv);
else
+ if (strcasecmp (cmd, "is_ready") == 0 || strcasecmp (cmd, "is-ready") == 0)
+ return run_is_ready (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_config") == 0 || strcasecmp (cmd, "is-config") == 0)
+ return run_is_config (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_launching") == 0 || strcasecmp (cmd, "is-launching") == 0)
+ return run_is_launching (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_busy") == 0 || strcasecmp (cmd, "is-busy") == 0)
+ return run_is_busy (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_state") == 0 || strcasecmp (cmd, "get-state") == 0)
+ return run_get_state (cmd, argc, argv);
+ else
if (strcasecmp (cmd, "mount") == 0)
return run_mount (cmd, argc, argv);
else
if (strcasecmp (cmd, "command_lines") == 0 || strcasecmp (cmd, "command-lines") == 0)
return run_command_lines (cmd, argc, argv);
else
+ if (strcasecmp (cmd, "stat") == 0)
+ return run_stat (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "lstat") == 0)
+ return run_lstat (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "statvfs") == 0)
+ return run_statvfs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "tune2fs_l") == 0 || strcasecmp (cmd, "tune2fs-l") == 0)
+ return run_tune2fs_l (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_setro") == 0 || strcasecmp (cmd, "blockdev-setro") == 0)
+ return run_blockdev_setro (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_setrw") == 0 || strcasecmp (cmd, "blockdev-setrw") == 0)
+ return run_blockdev_setrw (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_getro") == 0 || strcasecmp (cmd, "blockdev-getro") == 0)
+ return run_blockdev_getro (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_getss") == 0 || strcasecmp (cmd, "blockdev-getss") == 0)
+ return run_blockdev_getss (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_getbsz") == 0 || strcasecmp (cmd, "blockdev-getbsz") == 0)
+ return run_blockdev_getbsz (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_setbsz") == 0 || strcasecmp (cmd, "blockdev-setbsz") == 0)
+ return run_blockdev_setbsz (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_getsz") == 0 || strcasecmp (cmd, "blockdev-getsz") == 0)
+ return run_blockdev_getsz (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_getsize64") == 0 || strcasecmp (cmd, "blockdev-getsize64") == 0)
+ return run_blockdev_getsize64 (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_flushbufs") == 0 || strcasecmp (cmd, "blockdev-flushbufs") == 0)
+ return run_blockdev_flushbufs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_rereadpt") == 0 || strcasecmp (cmd, "blockdev-rereadpt") == 0)
+ return run_blockdev_rereadpt (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "upload") == 0)
+ return run_upload (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "download") == 0)
+ return run_download (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "checksum") == 0)
+ return run_checksum (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "tar_in") == 0 || strcasecmp (cmd, "tar-in") == 0)
+ return run_tar_in (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "tar_out") == 0 || strcasecmp (cmd, "tar-out") == 0)
+ return run_tar_out (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "tgz_in") == 0 || strcasecmp (cmd, "tgz-in") == 0)
+ return run_tgz_in (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "tgz_out") == 0 || strcasecmp (cmd, "tgz-out") == 0)
+ return run_tgz_out (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mount_ro") == 0 || strcasecmp (cmd, "mount-ro") == 0)
+ return run_mount_ro (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mount_options") == 0 || strcasecmp (cmd, "mount-options") == 0)
+ return run_mount_options (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mount_vfs") == 0 || strcasecmp (cmd, "mount-vfs") == 0)
+ return run_mount_vfs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "debug") == 0)
+ return run_debug (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "lvremove") == 0)
+ return run_lvremove (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "vgremove") == 0)
+ return run_vgremove (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "pvremove") == 0)
+ return run_pvremove (cmd, argc, argv);
+ else
{
fprintf (stderr, "%s: unknown command\n", cmd);
return -1;
git.annexia.org / libguestfs.git / blobdiff