printf ("%-20s %s\n", "aug-rm", "remove an Augeas path");
printf ("%-20s %s\n", "aug-save", "write all pending Augeas changes to disk");
printf ("%-20s %s\n", "aug-set", "set Augeas path to value");
+ printf ("%-20s %s\n", "blockdev-flushbufs", "flush device buffers");
+ printf ("%-20s %s\n", "blockdev-getbsz", "get blocksize of block device");
+ printf ("%-20s %s\n", "blockdev-getro", "is block device set to read-only");
+ printf ("%-20s %s\n", "blockdev-getsize64", "get total size of device in bytes");
+ printf ("%-20s %s\n", "blockdev-getss", "get sectorsize of block device");
+ printf ("%-20s %s\n", "blockdev-getsz", "get total size of device in 512-byte sectors");
+ printf ("%-20s %s\n", "blockdev-rereadpt", "reread partition table");
+ printf ("%-20s %s\n", "blockdev-setbsz", "set blocksize of block device");
+ printf ("%-20s %s\n", "blockdev-setro", "set block device to read-only");
+ printf ("%-20s %s\n", "blockdev-setrw", "set block device to read-write");
printf ("%-20s %s\n", "cat", "list the contents of a file");
+ printf ("%-20s %s\n", "checksum", "compute MD5, SHAx or CRC checksum of file");
printf ("%-20s %s\n", "chmod", "change file mode");
printf ("%-20s %s\n", "chown", "change file owner and group");
+ printf ("%-20s %s\n", "command", "run a command from the guest filesystem");
+ printf ("%-20s %s\n", "command-lines", "run a command, returning lines");
printf ("%-20s %s\n", "config", "add qemu parameters");
+ printf ("%-20s %s\n", "debug", "debugging and internals");
+ printf ("%-20s %s\n", "download", "download a file to the local machine");
printf ("%-20s %s\n", "exists", "test if file or directory exists");
+ printf ("%-20s %s\n", "file", "determine file type");
printf ("%-20s %s\n", "get-autosync", "get autosync mode");
printf ("%-20s %s\n", "get-path", "get the search path");
+ printf ("%-20s %s\n", "get-qemu", "get the qemu binary");
+ printf ("%-20s %s\n", "get-state", "get the current state");
printf ("%-20s %s\n", "get-verbose", "get verbose mode");
+ printf ("%-20s %s\n", "is-busy", "is busy processing a command");
+ printf ("%-20s %s\n", "is-config", "is in configuration state");
printf ("%-20s %s\n", "is-dir", "test if file exists");
printf ("%-20s %s\n", "is-file", "test if file exists");
+ printf ("%-20s %s\n", "is-launching", "is launching subprocess");
+ printf ("%-20s %s\n", "is-ready", "is ready to accept commands");
printf ("%-20s %s\n", "kill-subprocess", "kill the qemu subprocess");
printf ("%-20s %s\n", "launch", "launch the qemu subprocess");
printf ("%-20s %s\n", "list-devices", "list the block devices");
printf ("%-20s %s\n", "list-partitions", "list the partitions");
printf ("%-20s %s\n", "ll", "list the files in a directory (long format)");
printf ("%-20s %s\n", "ls", "list the files in a directory");
+ printf ("%-20s %s\n", "lstat", "get file information for a symbolic link");
printf ("%-20s %s\n", "lvcreate", "create an LVM volume group");
printf ("%-20s %s\n", "lvm-remove-all", "remove all LVM LVs, VGs and PVs");
+ printf ("%-20s %s\n", "lvremove", "remove an LVM logical volume");
printf ("%-20s %s\n", "lvs", "list the LVM logical volumes (LVs)");
printf ("%-20s %s\n", "lvs-full", "list the LVM logical volumes (LVs)");
printf ("%-20s %s\n", "mkdir", "create a directory");
printf ("%-20s %s\n", "mkdir-p", "create a directory and parents");
printf ("%-20s %s\n", "mkfs", "make a filesystem");
printf ("%-20s %s\n", "mount", "mount a guest disk at a position in the filesystem");
+ printf ("%-20s %s\n", "mount-options", "mount a guest disk with mount options");
+ printf ("%-20s %s\n", "mount-ro", "mount a guest disk, read-only");
+ printf ("%-20s %s\n", "mount-vfs", "mount a guest disk with mount options and vfstype");
printf ("%-20s %s\n", "mounts", "show mounted filesystems");
printf ("%-20s %s\n", "pvcreate", "create an LVM physical volume");
+ printf ("%-20s %s\n", "pvremove", "remove an LVM physical volume");
printf ("%-20s %s\n", "pvs", "list the LVM physical volumes (PVs)");
printf ("%-20s %s\n", "pvs-full", "list the LVM physical volumes (PVs)");
printf ("%-20s %s\n", "read-lines", "read file as lines");
printf ("%-20s %s\n", "rmdir", "remove a directory");
printf ("%-20s %s\n", "set-autosync", "set autosync mode");
printf ("%-20s %s\n", "set-path", "set the search path");
+ printf ("%-20s %s\n", "set-qemu", "set the qemu binary");
printf ("%-20s %s\n", "set-verbose", "set verbose mode");
printf ("%-20s %s\n", "sfdisk", "create partitions on a block device");
+ printf ("%-20s %s\n", "stat", "get file information");
+ printf ("%-20s %s\n", "statvfs", "get file system statistics");
printf ("%-20s %s\n", "sync", "sync disks, writes are flushed through to the disk image");
+ printf ("%-20s %s\n", "tar-in", "unpack tarfile to directory");
+ printf ("%-20s %s\n", "tar-out", "pack directory into tarfile");
+ printf ("%-20s %s\n", "tgz-in", "unpack compressed tarball to directory");
+ printf ("%-20s %s\n", "tgz-out", "pack directory into compressed tarball");
printf ("%-20s %s\n", "touch", "update file timestamps or create a new file");
+ printf ("%-20s %s\n", "tune2fs-l", "get ext2/ext3/ext4 superblock details");
printf ("%-20s %s\n", "umount", "unmount a filesystem");
printf ("%-20s %s\n", "umount-all", "unmount all filesystems");
+ printf ("%-20s %s\n", "upload", "upload a file from the local machine");
printf ("%-20s %s\n", "vgcreate", "create an LVM volume group");
+ printf ("%-20s %s\n", "vgremove", "remove an LVM volume group");
printf ("%-20s %s\n", "vgs", "list the LVM volume groups (VGs)");
printf ("%-20s %s\n", "vgs-full", "list the LVM volume groups (VGs)");
printf ("%-20s %s\n", "write-file", "create a file");
if (strcasecmp (cmd, "config") == 0)
pod2text ("config - add qemu parameters", " config <qemuparam> <qemuvalue>\n\nThis can be used to add arbitrary qemu command line parameters\nof the form C<-param value>. Actually it's not quite arbitrary - we\nprevent you from setting some parameters which would interfere with\nparameters that we use.\n\nThe first character of C<param> string must be a C<-> (dash).\n\nC<value> can be NULL.");
else
+ if (strcasecmp (cmd, "set_qemu") == 0 || strcasecmp (cmd, "set-qemu") == 0 || strcasecmp (cmd, "qemu") == 0)
+ pod2text ("set-qemu - set the qemu binary", " set-qemu <qemu>\n\nSet the qemu binary that we will use.\n\nThe default is chosen when the library was compiled by the\nconfigure script.\n\nYou can also override this by setting the C<LIBGUESTFS_QEMU>\nenvironment variable.\n\nThe string C<qemu> is stashed in the libguestfs handle, so the caller\nmust make sure it remains valid for the lifetime of the handle.\n\nSetting C<qemu> to C<NULL> restores the default qemu binary.\n\nYou can use 'qemu' as an alias for this command.");
+ else
+ if (strcasecmp (cmd, "get_qemu") == 0 || strcasecmp (cmd, "get-qemu") == 0)
+ pod2text ("get-qemu - get the qemu binary", " get-qemu\n\nReturn the current qemu binary.\n\nThis is always non-NULL. If it wasn't set already, then this will\nreturn the default qemu binary name.");
+ else
if (strcasecmp (cmd, "set_path") == 0 || strcasecmp (cmd, "set-path") == 0 || strcasecmp (cmd, "path") == 0)
pod2text ("set-path - set the search path", " set-path <path>\n\nSet the path that libguestfs searches for kernel and initrd.img.\n\nThe default is C<$libdir/guestfs> unless overridden by setting\nC<LIBGUESTFS_PATH> environment variable.\n\nThe string C<path> is stashed in the libguestfs handle, so the caller\nmust make sure it remains valid for the lifetime of the handle.\n\nSetting C<path> to C<NULL> restores the default path.\n\nYou can use 'path' as an alias for this command.");
else
if (strcasecmp (cmd, "get_verbose") == 0 || strcasecmp (cmd, "get-verbose") == 0)
pod2text ("get-verbose - get verbose mode", " get-verbose\n\nThis returns the verbose messages flag.");
else
+ if (strcasecmp (cmd, "is_ready") == 0 || strcasecmp (cmd, "is-ready") == 0)
+ pod2text ("is-ready - is ready to accept commands", " is-ready\n\nThis returns true iff this handle is ready to accept commands\n(in the C<READY> state).\n\nFor more information on states, see L<guestfs(3)>.");
+ else
+ if (strcasecmp (cmd, "is_config") == 0 || strcasecmp (cmd, "is-config") == 0)
+ pod2text ("is-config - is in configuration state", " is-config\n\nThis returns true iff this handle is being configured\n(in the C<CONFIG> state).\n\nFor more information on states, see L<guestfs(3)>.");
+ else
+ if (strcasecmp (cmd, "is_launching") == 0 || strcasecmp (cmd, "is-launching") == 0)
+ pod2text ("is-launching - is launching subprocess", " is-launching\n\nThis returns true iff this handle is launching the subprocess\n(in the C<LAUNCHING> state).\n\nFor more information on states, see L<guestfs(3)>.");
+ else
+ if (strcasecmp (cmd, "is_busy") == 0 || strcasecmp (cmd, "is-busy") == 0)
+ pod2text ("is-busy - is busy processing a command", " is-busy\n\nThis returns true iff this handle is busy processing a command\n(in the C<BUSY> state).\n\nFor more information on states, see L<guestfs(3)>.");
+ else
+ if (strcasecmp (cmd, "get_state") == 0 || strcasecmp (cmd, "get-state") == 0)
+ pod2text ("get-state - get the current state", " get-state\n\nThis returns the current state as an opaque integer. This is\nonly useful for printing debug and internal error messages.\n\nFor more information on states, see L<guestfs(3)>.");
+ else
if (strcasecmp (cmd, "mount") == 0)
pod2text ("mount - mount a guest disk at a position in the filesystem", " mount <device> <mountpoint>\n\nMount a guest disk at a position in the filesystem. Block devices\nare named C</dev/sda>, C</dev/sdb> and so on, as they were added to\nthe guest. If those block devices contain partitions, they will have\nthe usual names (eg. C</dev/sda1>). Also LVM C</dev/VG/LV>-style\nnames can be used.\n\nThe rules are the same as for L<mount(2)>: A filesystem must\nfirst be mounted on C</> before others can be mounted. Other\nfilesystems can only be mounted on directories which already\nexist.\n\nThe mounted filesystem is writable, if we have sufficient permissions\non the underlying device.\n\nThe filesystem options C<sync> and C<noatime> are set with this\ncall, in order to improve reliability.");
else
pod2text ("touch - update file timestamps or create a new file", " touch <path>\n\nTouch acts like the L<touch(1)> command. It can be used to\nupdate the timestamps on a file, or, if the file does not exist,\nto create a new zero-length file.");
else
if (strcasecmp (cmd, "cat") == 0)
- pod2text ("cat - list the contents of a file", " cat <path>\n\nReturn the contents of the file named C<path>.\n\nNote that this function cannot correctly handle binary files\n(specifically, files containing C<\\0> character which is treated\nas end of string). For those you need to use the C<read_file>\nfunction which has a more complex interface.\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
+ pod2text ("cat - list the contents of a file", " cat <path>\n\nReturn the contents of the file named C<path>.\n\nNote that this function cannot correctly handle binary files\n(specifically, files containing C<\\0> character which is treated\nas end of string). For those you need to use the C<download>\nfunction which has a more complex interface.\n\nBecause of the message protocol, there is a transfer limit \nof somewhere between 2MB and 4MB. To transfer large files you should use\nFTP.");
else
if (strcasecmp (cmd, "ll") == 0)
pod2text ("ll - list the files in a directory (long format)", " ll <directory>\n\nList the files in C<directory> (relative to the root directory,\nthere is no cwd) in the format of 'ls -la'.\n\nThis command is mostly useful for interactive sessions. It\nis I<not> intended that you try to parse the output string.");
if (strcasecmp (cmd, "lvm_remove_all") == 0 || strcasecmp (cmd, "lvm-remove-all") == 0)
pod2text ("lvm-remove-all - remove all LVM LVs, VGs and PVs", " lvm-remove-all\n\nThis command removes all LVM logical volumes, volume groups\nand physical volumes.\n\nB<This command is dangerous. Without careful use you\ncan easily destroy all your data>.");
else
+ if (strcasecmp (cmd, "file") == 0)
+ pod2text ("file - determine file type", " file <path>\n\nThis call uses the standard L<file(1)> command to determine\nthe type or contents of the file. This also works on devices,\nfor example to find out whether a partition contains a filesystem.\n\nThe exact command which runs is C<file -bsL path>. Note in\nparticular that the filename is not prepended to the output\n(the C<-b> option).");
+ else
+ if (strcasecmp (cmd, "command") == 0)
+ pod2text ("command - run a command from the guest filesystem", " command <arguments>\n\nThis call runs a command from the guest filesystem. The\nfilesystem must be mounted, and must contain a compatible\noperating system (ie. something Linux, with the same\nor compatible processor architecture).\n\nThe single parameter is an argv-style list of arguments.\nThe first element is the name of the program to run.\nSubsequent elements are parameters. The list must be\nnon-empty (ie. must contain a program name).\n\nThe C<$PATH> environment variable will contain at least\nC</usr/bin> and C</bin>. If you require a program from\nanother location, you should provide the full path in the\nfirst parameter.\n\nShared libraries and data files required by the program\nmust be available on filesystems which are mounted in the\ncorrect places. It is the caller's responsibility to ensure\nall filesystems that are needed are mounted at the right\nlocations.");
+ else
+ if (strcasecmp (cmd, "command_lines") == 0 || strcasecmp (cmd, "command-lines") == 0)
+ pod2text ("command-lines - run a command, returning lines", " command-lines <arguments>\n\nThis is the same as C<command>, but splits the\nresult into a list of lines.");
+ else
+ if (strcasecmp (cmd, "stat") == 0)
+ pod2text ("stat - get file information", " stat <path>\n\nReturns file information for the given C<path>.\n\nThis is the same as the C<stat(2)> system call.");
+ else
+ if (strcasecmp (cmd, "lstat") == 0)
+ pod2text ("lstat - get file information for a symbolic link", " lstat <path>\n\nReturns file information for the given C<path>.\n\nThis is the same as C<stat> except that if C<path>\nis a symbolic link, then the link is stat-ed, not the file it\nrefers to.\n\nThis is the same as the C<lstat(2)> system call.");
+ else
+ if (strcasecmp (cmd, "statvfs") == 0)
+ pod2text ("statvfs - get file system statistics", " statvfs <path>\n\nReturns file system statistics for any mounted file system.\nC<path> should be a file or directory in the mounted file system\n(typically it is the mount point itself, but it doesn't need to be).\n\nThis is the same as the C<statvfs(2)> system call.");
+ else
+ if (strcasecmp (cmd, "tune2fs_l") == 0 || strcasecmp (cmd, "tune2fs-l") == 0)
+ pod2text ("tune2fs-l - get ext2/ext3/ext4 superblock details", " tune2fs-l <device>\n\nThis returns the contents of the ext2, ext3 or ext4 filesystem\nsuperblock on C<device>.\n\nIt is the same as running C<tune2fs -l device>. See L<tune2fs(8)>\nmanpage for more details. The list of fields returned isn't\nclearly defined, and depends on both the version of C<tune2fs>\nthat libguestfs was built against, and the filesystem itself.");
+ else
+ if (strcasecmp (cmd, "blockdev_setro") == 0 || strcasecmp (cmd, "blockdev-setro") == 0)
+ pod2text ("blockdev-setro - set block device to read-only", " blockdev-setro <device>\n\nSets the block device named C<device> to read-only.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_setrw") == 0 || strcasecmp (cmd, "blockdev-setrw") == 0)
+ pod2text ("blockdev-setrw - set block device to read-write", " blockdev-setrw <device>\n\nSets the block device named C<device> to read-write.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_getro") == 0 || strcasecmp (cmd, "blockdev-getro") == 0)
+ pod2text ("blockdev-getro - is block device set to read-only", " blockdev-getro <device>\n\nReturns a boolean indicating if the block device is read-only\n(true if read-only, false if not).\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_getss") == 0 || strcasecmp (cmd, "blockdev-getss") == 0)
+ pod2text ("blockdev-getss - get sectorsize of block device", " blockdev-getss <device>\n\nThis returns the size of sectors on a block device.\nUsually 512, but can be larger for modern devices.\n\n(Note, this is not the size in sectors, use C<blockdev_getsz>\nfor that).\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_getbsz") == 0 || strcasecmp (cmd, "blockdev-getbsz") == 0)
+ pod2text ("blockdev-getbsz - get blocksize of block device", " blockdev-getbsz <device>\n\nThis returns the block size of a device.\n\n(Note this is different from both I<size in blocks> and\nI<filesystem block size>).\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_setbsz") == 0 || strcasecmp (cmd, "blockdev-setbsz") == 0)
+ pod2text ("blockdev-setbsz - set blocksize of block device", " blockdev-setbsz <device> <blocksize>\n\nThis sets the block size of a device.\n\n(Note this is different from both I<size in blocks> and\nI<filesystem block size>).\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_getsz") == 0 || strcasecmp (cmd, "blockdev-getsz") == 0)
+ pod2text ("blockdev-getsz - get total size of device in 512-byte sectors", " blockdev-getsz <device>\n\nThis returns the size of the device in units of 512-byte sectors\n(even if the sectorsize isn't 512 bytes ... weird).\n\nSee also C<blockdev_getss> for the real sector size of\nthe device, and C<blockdev_getsize64> for the more\nuseful I<size in bytes>.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_getsize64") == 0 || strcasecmp (cmd, "blockdev-getsize64") == 0)
+ pod2text ("blockdev-getsize64 - get total size of device in bytes", " blockdev-getsize64 <device>\n\nThis returns the size of the device in bytes.\n\nSee also C<blockdev_getsz>.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_flushbufs") == 0 || strcasecmp (cmd, "blockdev-flushbufs") == 0)
+ pod2text ("blockdev-flushbufs - flush device buffers", " blockdev-flushbufs <device>\n\nThis tells the kernel to flush internal buffers associated\nwith C<device>.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "blockdev_rereadpt") == 0 || strcasecmp (cmd, "blockdev-rereadpt") == 0)
+ pod2text ("blockdev-rereadpt - reread partition table", " blockdev-rereadpt <device>\n\nReread the partition table on C<device>.\n\nThis uses the L<blockdev(8)> command.");
+ else
+ if (strcasecmp (cmd, "upload") == 0)
+ pod2text ("upload - upload a file from the local machine", " upload <filename> <remotefilename>\n\nUpload local file C<filename> to C<remotefilename> on the\nfilesystem.\n\nC<filename> can also be a named pipe.\n\nSee also C<download>.");
+ else
+ if (strcasecmp (cmd, "download") == 0)
+ pod2text ("download - download a file to the local machine", " download <remotefilename> <filename>\n\nDownload file C<remotefilename> and save it as C<filename>\non the local machine.\n\nC<filename> can also be a named pipe.\n\nSee also C<upload>, C<cat>.");
+ else
+ if (strcasecmp (cmd, "checksum") == 0)
+ pod2text ("checksum - compute MD5, SHAx or CRC checksum of file", " checksum <csumtype> <path>\n\nThis call computes the MD5, SHAx or CRC checksum of the\nfile named C<path>.\n\nThe type of checksum to compute is given by the C<csumtype>\nparameter which must have one of the following values:\n\n=over 4\n\n=item C<crc>\n\nCompute the cyclic redundancy check (CRC) specified by POSIX\nfor the C<cksum> command.\n\n=item C<md5>\n\nCompute the MD5 hash (using the C<md5sum> program).\n\n=item C<sha1>\n\nCompute the SHA1 hash (using the C<sha1sum> program).\n\n=item C<sha224>\n\nCompute the SHA224 hash (using the C<sha224sum> program).\n\n=item C<sha256>\n\nCompute the SHA256 hash (using the C<sha256sum> program).\n\n=item C<sha384>\n\nCompute the SHA384 hash (using the C<sha384sum> program).\n\n=item C<sha512>\n\nCompute the SHA512 hash (using the C<sha512sum> program).\n\n=back\n\nThe checksum is returned as a printable string.");
+ else
+ if (strcasecmp (cmd, "tar_in") == 0 || strcasecmp (cmd, "tar-in") == 0)
+ pod2text ("tar-in - unpack tarfile to directory", " tar-in <tarfile> <directory>\n\nThis command uploads and unpacks local file C<tarfile> (an\nI<uncompressed> tar file) into C<directory>.\n\nTo upload a compressed tarball, use C<tgz_in>.");
+ else
+ if (strcasecmp (cmd, "tar_out") == 0 || strcasecmp (cmd, "tar-out") == 0)
+ pod2text ("tar-out - pack directory into tarfile", " tar-out <directory> <tarfile>\n\nThis command packs the contents of C<directory> and downloads\nit to local file C<tarfile>.\n\nTo download a compressed tarball, use C<tgz_out>.");
+ else
+ if (strcasecmp (cmd, "tgz_in") == 0 || strcasecmp (cmd, "tgz-in") == 0)
+ pod2text ("tgz-in - unpack compressed tarball to directory", " tgz-in <tarball> <directory>\n\nThis command uploads and unpacks local file C<tarball> (a\nI<gzip compressed> tar file) into C<directory>.\n\nTo upload an uncompressed tarball, use C<tar_in>.");
+ else
+ if (strcasecmp (cmd, "tgz_out") == 0 || strcasecmp (cmd, "tgz-out") == 0)
+ pod2text ("tgz-out - pack directory into compressed tarball", " tgz-out <directory> <tarball>\n\nThis command packs the contents of C<directory> and downloads\nit to local file C<tarball>.\n\nTo download an uncompressed tarball, use C<tar_out>.");
+ else
+ if (strcasecmp (cmd, "mount_ro") == 0 || strcasecmp (cmd, "mount-ro") == 0)
+ pod2text ("mount-ro - mount a guest disk, read-only", " mount-ro <device> <mountpoint>\n\nThis is the same as the C<mount> command, but it\nmounts the filesystem with the read-only (I<-o ro>) flag.");
+ else
+ if (strcasecmp (cmd, "mount_options") == 0 || strcasecmp (cmd, "mount-options") == 0)
+ pod2text ("mount-options - mount a guest disk with mount options", " mount-options <options> <device> <mountpoint>\n\nThis is the same as the C<mount> command, but it\nallows you to set the mount options as for the\nL<mount(8)> I<-o> flag.");
+ else
+ if (strcasecmp (cmd, "mount_vfs") == 0 || strcasecmp (cmd, "mount-vfs") == 0)
+ pod2text ("mount-vfs - mount a guest disk with mount options and vfstype", " mount-vfs <options> <vfstype> <device> <mountpoint>\n\nThis is the same as the C<mount> command, but it\nallows you to set both the mount options and the vfstype\nas for the L<mount(8)> I<-o> and I<-t> flags.");
+ else
+ if (strcasecmp (cmd, "debug") == 0)
+ pod2text ("debug - debugging and internals", " debug <subcmd> <extraargs>\n\nThe C<debug> command exposes some internals of\nC<guestfsd> (the guestfs daemon) that runs inside the\nqemu subprocess.\n\nThere is no comprehensive help for this command. You have\nto look at the file C<daemon/debug.c> in the libguestfs source\nto find out what you can do.");
+ else
+ if (strcasecmp (cmd, "lvremove") == 0)
+ pod2text ("lvremove - remove an LVM logical volume", " lvremove <device>\n\nRemove an LVM logical volume C<device>, where C<device> is\nthe path to the LV, such as C</dev/VG/LV>.\n\nYou can also remove all LVs in a volume group by specifying\nthe VG name, C</dev/VG>.");
+ else
+ if (strcasecmp (cmd, "vgremove") == 0)
+ pod2text ("vgremove - remove an LVM volume group", " vgremove <vgname>\n\nRemove an LVM volume group C<vgname>, (for example C<VG>).\n\nThis also forcibly removes all logical volumes in the volume\ngroup (if any).");
+ else
+ if (strcasecmp (cmd, "pvremove") == 0)
+ pod2text ("pvremove - remove an LVM physical volume", " pvremove <device>\n\nThis wipes a physical volume C<device> so that LVM will no longer\nrecognise it.\n\nThe implementation uses the C<pvremove> command which refuses to\nwipe physical volumes that contain any volume groups, so you have\nto remove those first.");
+ else
display_builtin_command (cmd);
}
print_lv (&lvs->val[i]);
}
+static void print_stat (struct guestfs_stat *stat)
+{
+ printf ("dev: %" PRIi64 "\n", stat->dev);
+ printf ("ino: %" PRIi64 "\n", stat->ino);
+ printf ("mode: %" PRIi64 "\n", stat->mode);
+ printf ("nlink: %" PRIi64 "\n", stat->nlink);
+ printf ("uid: %" PRIi64 "\n", stat->uid);
+ printf ("gid: %" PRIi64 "\n", stat->gid);
+ printf ("rdev: %" PRIi64 "\n", stat->rdev);
+ printf ("size: %" PRIi64 "\n", stat->size);
+ printf ("blksize: %" PRIi64 "\n", stat->blksize);
+ printf ("blocks: %" PRIi64 "\n", stat->blocks);
+ printf ("atime: %" PRIi64 "\n", stat->atime);
+ printf ("mtime: %" PRIi64 "\n", stat->mtime);
+ printf ("ctime: %" PRIi64 "\n", stat->ctime);
+}
+
+static void print_statvfs (struct guestfs_statvfs *statvfs)
+{
+ printf ("bsize: %" PRIi64 "\n", statvfs->bsize);
+ printf ("frsize: %" PRIi64 "\n", statvfs->frsize);
+ printf ("blocks: %" PRIi64 "\n", statvfs->blocks);
+ printf ("bfree: %" PRIi64 "\n", statvfs->bfree);
+ printf ("bavail: %" PRIi64 "\n", statvfs->bavail);
+ printf ("files: %" PRIi64 "\n", statvfs->files);
+ printf ("ffree: %" PRIi64 "\n", statvfs->ffree);
+ printf ("favail: %" PRIi64 "\n", statvfs->favail);
+ printf ("fsid: %" PRIi64 "\n", statvfs->fsid);
+ printf ("flag: %" PRIi64 "\n", statvfs->flag);
+ printf ("namemax: %" PRIi64 "\n", statvfs->namemax);
+}
+
static int run_launch (const char *cmd, int argc, char *argv[])
{
int r;
return r;
}
+static int run_set_qemu (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *qemu;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ qemu = argv[0];
+ r = guestfs_set_qemu (g, qemu);
+ return r;
+}
+
+static int run_get_qemu (const char *cmd, int argc, char *argv[])
+{
+ const char *r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_get_qemu (g);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ return 0;
+}
+
static int run_set_path (const char *cmd, int argc, char *argv[])
{
int r;
return 0;
}
+static int run_is_ready (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_is_ready (g);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_is_config (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_is_config (g);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_is_launching (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_is_launching (g);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_is_busy (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_is_busy (g);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_get_state (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ if (argc != 0) {
+ fprintf (stderr, "%s should have 0 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ r = guestfs_get_state (g);
+ if (r == -1) return -1;
+ printf ("%d\n", r);
+ return 0;
+}
+
static int run_mount (const char *cmd, int argc, char *argv[])
{
int r;
expr = strcmp (argv[1], "") != 0 ? argv[1] : NULL;
r = guestfs_aug_defvar (g, name, expr);
if (r == -1) return -1;
- if (r) printf ("%d\n", r);
+ printf ("%d\n", r);
return 0;
}
path = argv[0];
r = guestfs_aug_rm (g, path);
if (r == -1) return -1;
- if (r) printf ("%d\n", r);
+ printf ("%d\n", r);
return 0;
}
return r;
}
-int run_action (const char *cmd, int argc, char *argv[])
+static int run_file (const char *cmd, int argc, char *argv[])
{
- if (strcasecmp (cmd, "launch") == 0 || strcasecmp (cmd, "run") == 0)
- return run_launch (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "kill_subprocess") == 0 || strcasecmp (cmd, "kill-subprocess") == 0)
- return run_kill_subprocess (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "add_drive") == 0 || strcasecmp (cmd, "add-drive") == 0 || strcasecmp (cmd, "add") == 0)
- return run_add_drive (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "add_cdrom") == 0 || strcasecmp (cmd, "add-cdrom") == 0 || strcasecmp (cmd, "cdrom") == 0)
- return run_add_cdrom (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "config") == 0)
- return run_config (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "set_path") == 0 || strcasecmp (cmd, "set-path") == 0 || strcasecmp (cmd, "path") == 0)
- return run_set_path (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "get_path") == 0 || strcasecmp (cmd, "get-path") == 0)
- return run_get_path (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "set_autosync") == 0 || strcasecmp (cmd, "set-autosync") == 0 || strcasecmp (cmd, "autosync") == 0)
- return run_set_autosync (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "get_autosync") == 0 || strcasecmp (cmd, "get-autosync") == 0)
- return run_get_autosync (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "set_verbose") == 0 || strcasecmp (cmd, "set-verbose") == 0 || strcasecmp (cmd, "verbose") == 0)
- return run_set_verbose (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "get_verbose") == 0 || strcasecmp (cmd, "get-verbose") == 0)
- return run_get_verbose (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "mount") == 0)
- return run_mount (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "sync") == 0)
- return run_sync (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "touch") == 0)
- return run_touch (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "cat") == 0)
- return run_cat (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "ll") == 0)
- return run_ll (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "ls") == 0)
- return run_ls (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "list_devices") == 0 || strcasecmp (cmd, "list-devices") == 0)
- return run_list_devices (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "list_partitions") == 0 || strcasecmp (cmd, "list-partitions") == 0)
- return run_list_partitions (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "pvs") == 0)
- return run_pvs (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "vgs") == 0)
- return run_vgs (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "lvs") == 0)
- return run_lvs (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "pvs_full") == 0 || strcasecmp (cmd, "pvs-full") == 0)
- return run_pvs_full (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "vgs_full") == 0 || strcasecmp (cmd, "vgs-full") == 0)
- return run_vgs_full (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "lvs_full") == 0 || strcasecmp (cmd, "lvs-full") == 0)
- return run_lvs_full (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "read_lines") == 0 || strcasecmp (cmd, "read-lines") == 0)
- return run_read_lines (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_init") == 0 || strcasecmp (cmd, "aug-init") == 0)
- return run_aug_init (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_close") == 0 || strcasecmp (cmd, "aug-close") == 0)
- return run_aug_close (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_defvar") == 0 || strcasecmp (cmd, "aug-defvar") == 0)
- return run_aug_defvar (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_defnode") == 0 || strcasecmp (cmd, "aug-defnode") == 0)
- return run_aug_defnode (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_get") == 0 || strcasecmp (cmd, "aug-get") == 0)
- return run_aug_get (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_set") == 0 || strcasecmp (cmd, "aug-set") == 0)
- return run_aug_set (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_insert") == 0 || strcasecmp (cmd, "aug-insert") == 0)
- return run_aug_insert (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_rm") == 0 || strcasecmp (cmd, "aug-rm") == 0)
- return run_aug_rm (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_mv") == 0 || strcasecmp (cmd, "aug-mv") == 0)
- return run_aug_mv (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_match") == 0 || strcasecmp (cmd, "aug-match") == 0)
- return run_aug_match (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_save") == 0 || strcasecmp (cmd, "aug-save") == 0)
- return run_aug_save (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_load") == 0 || strcasecmp (cmd, "aug-load") == 0)
- return run_aug_load (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "aug_ls") == 0 || strcasecmp (cmd, "aug-ls") == 0)
- return run_aug_ls (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "rm") == 0)
- return run_rm (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "rmdir") == 0)
- return run_rmdir (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "rm_rf") == 0 || strcasecmp (cmd, "rm-rf") == 0)
- return run_rm_rf (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "mkdir") == 0)
- return run_mkdir (cmd, argc, argv);
- else
- if (strcasecmp (cmd, "mkdir_p") == 0 || strcasecmp (cmd, "mkdir-p") == 0)
+ char *r;
+ const char *path;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ path = argv[0];
+ r = guestfs_file (g, path);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_command (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ char **arguments;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ arguments = parse_string_list (argv[0]);
+ r = guestfs_command (g, arguments);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_command_lines (const char *cmd, int argc, char *argv[])
+{
+ char **r;
+ char **arguments;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ arguments = parse_string_list (argv[0]);
+ r = guestfs_command_lines (g, arguments);
+ if (r == NULL) return -1;
+ print_strings (r);
+ free_strings (r);
+ return 0;
+}
+
+static int run_stat (const char *cmd, int argc, char *argv[])
+{
+ struct guestfs_stat *r;
+ const char *path;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ path = argv[0];
+ r = guestfs_stat (g, path);
+ if (r == NULL) return -1;
+ print_stat (r);
+ free (r);
+ return 0;
+}
+
+static int run_lstat (const char *cmd, int argc, char *argv[])
+{
+ struct guestfs_stat *r;
+ const char *path;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ path = argv[0];
+ r = guestfs_lstat (g, path);
+ if (r == NULL) return -1;
+ print_stat (r);
+ free (r);
+ return 0;
+}
+
+static int run_statvfs (const char *cmd, int argc, char *argv[])
+{
+ struct guestfs_statvfs *r;
+ const char *path;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ path = argv[0];
+ r = guestfs_statvfs (g, path);
+ if (r == NULL) return -1;
+ print_statvfs (r);
+ free (r);
+ return 0;
+}
+
+static int run_tune2fs_l (const char *cmd, int argc, char *argv[])
+{
+ char **r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_tune2fs_l (g, device);
+ if (r == NULL) return -1;
+ print_table (r);
+ free_strings (r);
+ return 0;
+}
+
+static int run_blockdev_setro (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_setro (g, device);
+ return r;
+}
+
+static int run_blockdev_setrw (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_setrw (g, device);
+ return r;
+}
+
+static int run_blockdev_getro (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_getro (g, device);
+ if (r == -1) return -1;
+ if (r) printf ("true\n"); else printf ("false\n");
+ return 0;
+}
+
+static int run_blockdev_getss (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_getss (g, device);
+ if (r == -1) return -1;
+ printf ("%d\n", r);
+ return 0;
+}
+
+static int run_blockdev_getbsz (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_getbsz (g, device);
+ if (r == -1) return -1;
+ printf ("%d\n", r);
+ return 0;
+}
+
+static int run_blockdev_setbsz (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ int blocksize;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ blocksize = atoi (argv[1]);
+ r = guestfs_blockdev_setbsz (g, device, blocksize);
+ return r;
+}
+
+static int run_blockdev_getsz (const char *cmd, int argc, char *argv[])
+{
+ int64_t r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_getsz (g, device);
+ if (r == -1) return -1;
+ printf ("%" PRIi64 "\n", r);
+ return 0;
+}
+
+static int run_blockdev_getsize64 (const char *cmd, int argc, char *argv[])
+{
+ int64_t r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_getsize64 (g, device);
+ if (r == -1) return -1;
+ printf ("%" PRIi64 "\n", r);
+ return 0;
+}
+
+static int run_blockdev_flushbufs (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_flushbufs (g, device);
+ return r;
+}
+
+static int run_blockdev_rereadpt (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_blockdev_rereadpt (g, device);
+ return r;
+}
+
+static int run_upload (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *filename;
+ const char *remotefilename;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ filename = strcmp (argv[0], "-") != 0 ? argv[0] : "/dev/stdin";
+ remotefilename = argv[1];
+ r = guestfs_upload (g, filename, remotefilename);
+ return r;
+}
+
+static int run_download (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *remotefilename;
+ const char *filename;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ remotefilename = argv[0];
+ filename = strcmp (argv[1], "-") != 0 ? argv[1] : "/dev/stdout";
+ r = guestfs_download (g, remotefilename, filename);
+ return r;
+}
+
+static int run_checksum (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *csumtype;
+ const char *path;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ csumtype = argv[0];
+ path = argv[1];
+ r = guestfs_checksum (g, csumtype, path);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_tar_in (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *tarfile;
+ const char *directory;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ tarfile = strcmp (argv[0], "-") != 0 ? argv[0] : "/dev/stdin";
+ directory = argv[1];
+ r = guestfs_tar_in (g, tarfile, directory);
+ return r;
+}
+
+static int run_tar_out (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *directory;
+ const char *tarfile;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ directory = argv[0];
+ tarfile = strcmp (argv[1], "-") != 0 ? argv[1] : "/dev/stdout";
+ r = guestfs_tar_out (g, directory, tarfile);
+ return r;
+}
+
+static int run_tgz_in (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *tarball;
+ const char *directory;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ tarball = strcmp (argv[0], "-") != 0 ? argv[0] : "/dev/stdin";
+ directory = argv[1];
+ r = guestfs_tgz_in (g, tarball, directory);
+ return r;
+}
+
+static int run_tgz_out (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *directory;
+ const char *tarball;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ directory = argv[0];
+ tarball = strcmp (argv[1], "-") != 0 ? argv[1] : "/dev/stdout";
+ r = guestfs_tgz_out (g, directory, tarball);
+ return r;
+}
+
+static int run_mount_ro (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ const char *mountpoint;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ mountpoint = argv[1];
+ r = guestfs_mount_ro (g, device, mountpoint);
+ return r;
+}
+
+static int run_mount_options (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *options;
+ const char *device;
+ const char *mountpoint;
+ if (argc != 3) {
+ fprintf (stderr, "%s should have 3 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ options = argv[0];
+ device = argv[1];
+ mountpoint = argv[2];
+ r = guestfs_mount_options (g, options, device, mountpoint);
+ return r;
+}
+
+static int run_mount_vfs (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *options;
+ const char *vfstype;
+ const char *device;
+ const char *mountpoint;
+ if (argc != 4) {
+ fprintf (stderr, "%s should have 4 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ options = argv[0];
+ vfstype = argv[1];
+ device = argv[2];
+ mountpoint = argv[3];
+ r = guestfs_mount_vfs (g, options, vfstype, device, mountpoint);
+ return r;
+}
+
+static int run_debug (const char *cmd, int argc, char *argv[])
+{
+ char *r;
+ const char *subcmd;
+ char **extraargs;
+ if (argc != 2) {
+ fprintf (stderr, "%s should have 2 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ subcmd = argv[0];
+ extraargs = parse_string_list (argv[1]);
+ r = guestfs_debug (g, subcmd, extraargs);
+ if (r == NULL) return -1;
+ printf ("%s\n", r);
+ free (r);
+ return 0;
+}
+
+static int run_lvremove (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_lvremove (g, device);
+ return r;
+}
+
+static int run_vgremove (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *vgname;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ vgname = argv[0];
+ r = guestfs_vgremove (g, vgname);
+ return r;
+}
+
+static int run_pvremove (const char *cmd, int argc, char *argv[])
+{
+ int r;
+ const char *device;
+ if (argc != 1) {
+ fprintf (stderr, "%s should have 1 parameter(s)\n", cmd);
+ fprintf (stderr, "type 'help %s' for help on %s\n", cmd, cmd);
+ return -1;
+ }
+ device = argv[0];
+ r = guestfs_pvremove (g, device);
+ return r;
+}
+
+int run_action (const char *cmd, int argc, char *argv[])
+{
+ if (strcasecmp (cmd, "launch") == 0 || strcasecmp (cmd, "run") == 0)
+ return run_launch (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "kill_subprocess") == 0 || strcasecmp (cmd, "kill-subprocess") == 0)
+ return run_kill_subprocess (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "add_drive") == 0 || strcasecmp (cmd, "add-drive") == 0 || strcasecmp (cmd, "add") == 0)
+ return run_add_drive (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "add_cdrom") == 0 || strcasecmp (cmd, "add-cdrom") == 0 || strcasecmp (cmd, "cdrom") == 0)
+ return run_add_cdrom (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "config") == 0)
+ return run_config (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "set_qemu") == 0 || strcasecmp (cmd, "set-qemu") == 0 || strcasecmp (cmd, "qemu") == 0)
+ return run_set_qemu (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_qemu") == 0 || strcasecmp (cmd, "get-qemu") == 0)
+ return run_get_qemu (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "set_path") == 0 || strcasecmp (cmd, "set-path") == 0 || strcasecmp (cmd, "path") == 0)
+ return run_set_path (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_path") == 0 || strcasecmp (cmd, "get-path") == 0)
+ return run_get_path (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "set_autosync") == 0 || strcasecmp (cmd, "set-autosync") == 0 || strcasecmp (cmd, "autosync") == 0)
+ return run_set_autosync (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_autosync") == 0 || strcasecmp (cmd, "get-autosync") == 0)
+ return run_get_autosync (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "set_verbose") == 0 || strcasecmp (cmd, "set-verbose") == 0 || strcasecmp (cmd, "verbose") == 0)
+ return run_set_verbose (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_verbose") == 0 || strcasecmp (cmd, "get-verbose") == 0)
+ return run_get_verbose (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_ready") == 0 || strcasecmp (cmd, "is-ready") == 0)
+ return run_is_ready (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_config") == 0 || strcasecmp (cmd, "is-config") == 0)
+ return run_is_config (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_launching") == 0 || strcasecmp (cmd, "is-launching") == 0)
+ return run_is_launching (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "is_busy") == 0 || strcasecmp (cmd, "is-busy") == 0)
+ return run_is_busy (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "get_state") == 0 || strcasecmp (cmd, "get-state") == 0)
+ return run_get_state (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mount") == 0)
+ return run_mount (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "sync") == 0)
+ return run_sync (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "touch") == 0)
+ return run_touch (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "cat") == 0)
+ return run_cat (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "ll") == 0)
+ return run_ll (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "ls") == 0)
+ return run_ls (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "list_devices") == 0 || strcasecmp (cmd, "list-devices") == 0)
+ return run_list_devices (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "list_partitions") == 0 || strcasecmp (cmd, "list-partitions") == 0)
+ return run_list_partitions (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "pvs") == 0)
+ return run_pvs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "vgs") == 0)
+ return run_vgs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "lvs") == 0)
+ return run_lvs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "pvs_full") == 0 || strcasecmp (cmd, "pvs-full") == 0)
+ return run_pvs_full (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "vgs_full") == 0 || strcasecmp (cmd, "vgs-full") == 0)
+ return run_vgs_full (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "lvs_full") == 0 || strcasecmp (cmd, "lvs-full") == 0)
+ return run_lvs_full (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "read_lines") == 0 || strcasecmp (cmd, "read-lines") == 0)
+ return run_read_lines (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_init") == 0 || strcasecmp (cmd, "aug-init") == 0)
+ return run_aug_init (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_close") == 0 || strcasecmp (cmd, "aug-close") == 0)
+ return run_aug_close (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_defvar") == 0 || strcasecmp (cmd, "aug-defvar") == 0)
+ return run_aug_defvar (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_defnode") == 0 || strcasecmp (cmd, "aug-defnode") == 0)
+ return run_aug_defnode (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_get") == 0 || strcasecmp (cmd, "aug-get") == 0)
+ return run_aug_get (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_set") == 0 || strcasecmp (cmd, "aug-set") == 0)
+ return run_aug_set (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_insert") == 0 || strcasecmp (cmd, "aug-insert") == 0)
+ return run_aug_insert (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_rm") == 0 || strcasecmp (cmd, "aug-rm") == 0)
+ return run_aug_rm (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_mv") == 0 || strcasecmp (cmd, "aug-mv") == 0)
+ return run_aug_mv (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_match") == 0 || strcasecmp (cmd, "aug-match") == 0)
+ return run_aug_match (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_save") == 0 || strcasecmp (cmd, "aug-save") == 0)
+ return run_aug_save (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_load") == 0 || strcasecmp (cmd, "aug-load") == 0)
+ return run_aug_load (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "aug_ls") == 0 || strcasecmp (cmd, "aug-ls") == 0)
+ return run_aug_ls (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "rm") == 0)
+ return run_rm (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "rmdir") == 0)
+ return run_rmdir (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "rm_rf") == 0 || strcasecmp (cmd, "rm-rf") == 0)
+ return run_rm_rf (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mkdir") == 0)
+ return run_mkdir (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mkdir_p") == 0 || strcasecmp (cmd, "mkdir-p") == 0)
return run_mkdir_p (cmd, argc, argv);
else
if (strcasecmp (cmd, "chmod") == 0)
if (strcasecmp (cmd, "lvm_remove_all") == 0 || strcasecmp (cmd, "lvm-remove-all") == 0)
return run_lvm_remove_all (cmd, argc, argv);
else
+ if (strcasecmp (cmd, "file") == 0)
+ return run_file (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "command") == 0)
+ return run_command (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "command_lines") == 0 || strcasecmp (cmd, "command-lines") == 0)
+ return run_command_lines (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "stat") == 0)
+ return run_stat (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "lstat") == 0)
+ return run_lstat (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "statvfs") == 0)
+ return run_statvfs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "tune2fs_l") == 0 || strcasecmp (cmd, "tune2fs-l") == 0)
+ return run_tune2fs_l (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_setro") == 0 || strcasecmp (cmd, "blockdev-setro") == 0)
+ return run_blockdev_setro (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_setrw") == 0 || strcasecmp (cmd, "blockdev-setrw") == 0)
+ return run_blockdev_setrw (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_getro") == 0 || strcasecmp (cmd, "blockdev-getro") == 0)
+ return run_blockdev_getro (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_getss") == 0 || strcasecmp (cmd, "blockdev-getss") == 0)
+ return run_blockdev_getss (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_getbsz") == 0 || strcasecmp (cmd, "blockdev-getbsz") == 0)
+ return run_blockdev_getbsz (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_setbsz") == 0 || strcasecmp (cmd, "blockdev-setbsz") == 0)
+ return run_blockdev_setbsz (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_getsz") == 0 || strcasecmp (cmd, "blockdev-getsz") == 0)
+ return run_blockdev_getsz (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_getsize64") == 0 || strcasecmp (cmd, "blockdev-getsize64") == 0)
+ return run_blockdev_getsize64 (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_flushbufs") == 0 || strcasecmp (cmd, "blockdev-flushbufs") == 0)
+ return run_blockdev_flushbufs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "blockdev_rereadpt") == 0 || strcasecmp (cmd, "blockdev-rereadpt") == 0)
+ return run_blockdev_rereadpt (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "upload") == 0)
+ return run_upload (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "download") == 0)
+ return run_download (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "checksum") == 0)
+ return run_checksum (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "tar_in") == 0 || strcasecmp (cmd, "tar-in") == 0)
+ return run_tar_in (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "tar_out") == 0 || strcasecmp (cmd, "tar-out") == 0)
+ return run_tar_out (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "tgz_in") == 0 || strcasecmp (cmd, "tgz-in") == 0)
+ return run_tgz_in (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "tgz_out") == 0 || strcasecmp (cmd, "tgz-out") == 0)
+ return run_tgz_out (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mount_ro") == 0 || strcasecmp (cmd, "mount-ro") == 0)
+ return run_mount_ro (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mount_options") == 0 || strcasecmp (cmd, "mount-options") == 0)
+ return run_mount_options (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "mount_vfs") == 0 || strcasecmp (cmd, "mount-vfs") == 0)
+ return run_mount_vfs (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "debug") == 0)
+ return run_debug (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "lvremove") == 0)
+ return run_lvremove (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "vgremove") == 0)
+ return run_vgremove (cmd, argc, argv);
+ else
+ if (strcasecmp (cmd, "pvremove") == 0)
+ return run_pvremove (cmd, argc, argv);
+ else
{
fprintf (stderr, "%s: unknown command\n", cmd);
return -1;
git.annexia.org / libguestfs.git / blobdiff