From 71f4f18da53b9f34a203e9b82e360898b460fe64 Mon Sep 17 00:00:00 2001 From: "Richard W.M. Jones" Date: Sat, 23 Oct 2010 16:49:50 +0100 Subject: [PATCH] Version 1.4.6. --- BUGS | 101 ++++++++++++++++++++++++++++++++++++++------ configure.ac | 2 +- po/es.po | 119 +++++++++++++++++++++++++++------------------------- po/gu.po | 117 ++++++++++++++++++++++++++------------------------- po/hi.po | 113 +++++++++++++++++++++++++------------------------ po/kn.po | 117 ++++++++++++++++++++++++++------------------------- po/libguestfs.pot | 107 +++++++++++++++++++++++------------------------ po/ml.po | 113 +++++++++++++++++++++++++------------------------ po/mr.po | 113 +++++++++++++++++++++++++------------------------ po/or.po | 113 +++++++++++++++++++++++++------------------------ po/pa.po | 113 +++++++++++++++++++++++++------------------------ po/pl.po | 123 ++++++++++++++++++++++++++++-------------------------- po/ta.po | 113 +++++++++++++++++++++++++------------------------ po/te.po | 113 +++++++++++++++++++++++++------------------------ 14 files changed, 792 insertions(+), 685 deletions(-) diff --git a/BUGS b/BUGS index 1cebc8d..3ae831f 100644 --- a/BUGS +++ b/BUGS @@ -1,5 +1,5 @@ NOTE: This file is automatically generated from "update-bugs". -Last updated: 2010-09-08 16:52:18 +Last updated: 2010-10-23 16:50:06 This contains a local list of the bugs that are open against libguestfs. Bugs are tracked in the Red Hat Bugzilla database @@ -32,6 +32,12 @@ Bugs in NEW or ASSIGNED state are open and waiting for someone to fix. 627833 NEW https://bugzilla.redhat.com/show_bug.cgi?id=627833 get-e2uuid should use blkid instead of "tune2fs -l" to get filesystem UUID +633174 NEW https://bugzilla.redhat.com/show_bug.cgi?id=633174 + some guestfish sub commands can not handle special files properly + +643991 NEW https://bugzilla.redhat.com/show_bug.cgi?id=643991 + CVE-2010-3851 libguestfs: missing disk format specifier when adding a disk [fedora-all] + 501884 NEW https://bugzilla.redhat.com/show_bug.cgi?id=501884 virt-inspector still configured, even if there are missing deps @@ -77,9 +83,6 @@ Bugs in NEW or ASSIGNED state are open and waiting for someone to fix. 600144 NEW https://bugzilla.redhat.com/show_bug.cgi?id=600144 document that mkmountpoint and umount-all cannot be mixed -602599 NEW https://bugzilla.redhat.com/show_bug.cgi?id=602599 - [RFE] A new API for custom cleanup prior to close in perl bindings - 602997 NEW https://bugzilla.redhat.com/show_bug.cgi?id=602997 part-get-bootable gives wrong result with an unordered part layout @@ -107,9 +110,6 @@ Bugs in NEW or ASSIGNED state are open and waiting for someone to fix. 619345 NEW https://bugzilla.redhat.com/show_bug.cgi?id=619345 RFE: Enable coredump capture in the appliance -623183 NEW https://bugzilla.redhat.com/show_bug.cgi?id=623183 - "libguestfs: warning: unexpected connection from UID 0 to port ..." - 624035 NEW https://bugzilla.redhat.com/show_bug.cgi?id=624035 guestfish "upload /file foo" command hangs or gives a protocol error @@ -128,6 +128,51 @@ Bugs in NEW or ASSIGNED state are open and waiting for someone to fix. 627832 NEW https://bugzilla.redhat.com/show_bug.cgi?id=627832 [RFE] guestfish should print outputs in a suitable base (eg. octal for modes) +634649 NEW https://bugzilla.redhat.com/show_bug.cgi?id=634649 + [RFE] Align a NTFS partition within qcow2 over LVM to start at offset which is a multiple of 8 + +635971 NEW https://bugzilla.redhat.com/show_bug.cgi?id=635971 + glob mkfs ext2 /dev/vd[b-t]1 does not expand + +636061 NEW https://bugzilla.redhat.com/show_bug.cgi?id=636061 + [abrt] guestfish-1.2.11-1.fc12: malloc_consolidate: Process /usr/bin/guestfish was killed by signal 11 (SIGSEGV) + +637244 NEW https://bugzilla.redhat.com/show_bug.cgi?id=637244 + virt-inspector has noisy start when inspecting 64-bit disk image from 32-bit host + +637251 NEW https://bugzilla.redhat.com/show_bug.cgi?id=637251 + virt-inspector fails to recognize data-only NTFS disk image + +637252 NEW https://bugzilla.redhat.com/show_bug.cgi?id=637252 + virt-resize has no 32-bit support + +638899 NEW https://bugzilla.redhat.com/show_bug.cgi?id=638899 + /dev/mapper paths should not be returned from C inspection APIs + +638901 NEW https://bugzilla.redhat.com/show_bug.cgi?id=638901 + Appliance filename should not contain repository name + +639405 NEW https://bugzilla.redhat.com/show_bug.cgi?id=639405 + Interrupted cached appliance creation leaves libguestfs unusable + +642821 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642821 + virt-resize falls over on a disk image with a logical swap partition + +642929 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642929 + C inspection code should ignore /dev/fd* in /etc/fstab + +642930 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642930 + virt-inspector (Sys::Guestfs::Lib) should use C inspection APIs + +642932 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642932 + guestmount options should match guestfish options + +642933 NEW https://bugzilla.redhat.com/show_bug.cgi?id=642933 + guestfs_list_filesystems should be used in all possible places + +645869 NEW https://bugzilla.redhat.com/show_bug.cgi?id=645869 + configure --disable-appliance should not need to check for febootstrap + debootstrap + 501882 ASSIGNED https://bugzilla.redhat.com/show_bug.cgi?id=501882 /tmp/libguestfs temporary directory is not cleaned up @@ -149,6 +194,12 @@ Bugs in NEW or ASSIGNED state are open and waiting for someone to fix. 541618 ASSIGNED https://bugzilla.redhat.com/show_bug.cgi?id=541618 guestfish not able to mount freebsd ufs2 partitions automatically +639601 ASSIGNED https://bugzilla.redhat.com/show_bug.cgi?id=639601 + "virt-ls" command failed to parse domain name "#" + +639602 ASSIGNED https://bugzilla.redhat.com/show_bug.cgi?id=639602 + ""virt-list-filesystems" fails to parse the command line argument if the domain name is "#". + -------------------------------------------------- Bugs in MODIFIED, POST or ON_QA state are fixed. You can help by testing the fixes. @@ -213,12 +264,36 @@ You can help by testing the fixes. 602592 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=602592 [RFE] expose guestfs_close in perl bindings -610880 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=610880 - libguestfs should set broader read perms on tmpdir, so works in some situations when executed with umask 077 - 619334 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=619334 RFE: Enable coredump capture in the appliance +633096 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=633096 + virt-resize calculates block device size incorrectly, doesn't work with qcow2 target + +633766 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=633766 + virt-resize --shrink fails + +634246 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=634246 + guestfs_part_get_parttype returns "loop" when run against a partition, LV or filesystem + +635969 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=635969 + glob echo mkfs ext2 /dev/vd[b-t]1 prints garbage + +639986 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=639986 + virt-df --csv does not properly quote " in libvirt domain names + +640961 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=640961 + Document that grub-install might be needed for old Linux guests after virt-resize + +642826 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=642826 + virt-resize converts any other image format to raw without notifying user, instructions do not account for this + +642934 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=642934 + No way to specify disk format when adding a disk to libguestfs + +643624 MODIFIED https://bugzilla.redhat.com/show_bug.cgi?id=643624 + libguestfs tools documentation should describe how to quote guest domain names from shell + -------------------------------------------------- These bugs are in the VERIFIED state. @@ -249,9 +324,6 @@ These bugs are in the VERIFIED state. 615870 VERIFIED https://bugzilla.redhat.com/show_bug.cgi?id=615870 libguestfs-find-requires.sh is not autogenerating dependencies for libguestfs -615946 VERIFIED https://bugzilla.redhat.com/show_bug.cgi?id=615946 - libguestfs-find-requires.sh is not autogenerating dependencies for libguestfs - 616438 VERIFIED https://bugzilla.redhat.com/show_bug.cgi?id=616438 libguestfs missing runtime Requires: binutils @@ -261,4 +333,7 @@ These bugs are in the VERIFIED state. 619826 VERIFIED https://bugzilla.redhat.com/show_bug.cgi?id=619826 [RFE] Need a way to determine if a particular block device is a logical volume +636454 VERIFIED https://bugzilla.redhat.com/show_bug.cgi?id=636454 + [RFE] Need a way to determine if a particular block device is a logical volume + End of BUGS file. diff --git a/configure.ac b/configure.ac index 1ce7d75..28df8d2 100644 --- a/configure.ac +++ b/configure.ac @@ -18,7 +18,7 @@ # major/minor/release must be numbers m4_define([libguestfs_major], [1]) m4_define([libguestfs_minor], [4]) -m4_define([libguestfs_release], [5]) +m4_define([libguestfs_release], [6]) # extra can be any string m4_define([libguestfs_extra], []) diff --git a/po/es.po b/po/es.po index a6b1f1a..129924a 100644 --- a/po/es.po +++ b/po/es.po @@ -9,10 +9,11 @@ msgstr "" "Project-Id-Version: libguestfs.master\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: \n" "Last-Translator: Héctor Daniel Cabrera \n" "Language-Team: Fedora Spanish \n" +"Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -467,9 +468,14 @@ msgstr "se encuentra ocupado procesando un comando" msgid "is in configuration state" msgstr "se encuentra en estado de configuración" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "verifica si existe el archivo" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "crea un directorio" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1328,7 +1334,7 @@ msgstr "%s: %s: entero fuera de rango\n" msgid "%s: unknown command\n" msgstr "%s: comando desconocido\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "utilice '%s nombre de archivo' para editar un archivo\n" @@ -1339,11 +1345,11 @@ msgid "Try `%s --help' for more information.\n" msgstr "Intente con `%s --help' para más información.\n" #: fish/fish.c:93 -#, c-format +#, fuzzy, c-format msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1372,7 +1378,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: shell del sistema de archivos huésped\n" "%s le permite editar sistemas de archivos de máquina virtual\n" @@ -1612,7 +1618,7 @@ msgstr "" " Esto muestra los parámetros en la terminal.\n" #: fish/fish.c:1109 -#, c-format +#, fuzzy, c-format msgid "" "edit - edit a file in the image\n" " edit \n" @@ -1624,9 +1630,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "edit - edita un archivo de la imagen\n" " edit \n" @@ -1642,7 +1645,7 @@ msgstr "" " NOTA: Esto no funcionará en forma confiable con archivos muy grandes\n" " (> 2 MB) o archivos binarios que tengan \\0 bytes.\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1658,7 +1661,7 @@ msgstr "" " Modificar el directorio actual de guestfish. Este comando\n" " es útil si desea descargar archivos hacia un lugar en particular.\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1676,7 +1679,7 @@ msgstr "" "reiteradamente\n" " una vez por cada argumento expandido.\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1689,7 +1692,7 @@ msgstr "" "\n" " Abre la página del manual de guestfish.\n" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1700,8 +1703,8 @@ msgstr "" " help cmd\n" " help\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1713,9 +1716,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "more - muestra un archivo en el paginador\n" " more \n" @@ -1732,7 +1732,7 @@ msgstr "" "grandes\n" " (> 2 MB) o binarios conteniendo \\0 bytes.\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1741,7 +1741,7 @@ msgstr "" "quit - abandonar guestfish\n" " quit\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1760,7 +1760,7 @@ msgstr "" "finaliza\n" "guestfish. Sin embargo, esto es ocasionalmente útil para realizar pruebas.\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1800,7 +1800,7 @@ msgstr "" " El tamaño puede ser especificado utilizando sufijos estándar, p.ej. " "'1M'.\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1821,7 +1821,7 @@ msgstr "" "\n" " Consulte también la sección AVAILABILITY de guestfs(3).\n" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1836,12 +1836,12 @@ msgstr "" " Esto ejecuta como siempre, e imprime luego el\n" " tiempo transcurrido.\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "%s comando no conocido, utilice -h para listar todos los comandos\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1852,17 +1852,17 @@ msgstr "" "Para obtener una lista de comandos: guestfish -h\n" "Para obtener la documentación completa: man guestfish\n" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "Cuota problemática en la cadena \"%s\"\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "utilice 'glob comando [args...]'\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: falló la llamada guestfs_glob_expand: %s\n" @@ -1882,12 +1882,12 @@ msgstr "Utilice 'man' sin parámetros para abrir el manual\n" msgid "the external 'man' program failed\n" msgstr "falló el programa externo ''man'\n" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "utilice '%s nombre de archivo' para paginar un archivo\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" @@ -1896,10 +1896,10 @@ msgstr "" "Listado de las imágenes de disco preparadas:\n" "\n" -#: fish/prep.c:117 -#, c-format +#: fish/prep.c:40 +#, fuzzy, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" @@ -1907,17 +1907,17 @@ msgstr "" "\n" "%s\n" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr " Parámetros opcionales:\n" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "<%s> %s (predeterminado: %s)\n" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1930,7 +1930,7 @@ msgstr "" "veces).\n" "Para obtener mayor información, consulte el manual de guestfish(1).\n" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" @@ -1941,31 +1941,31 @@ msgstr "" "Utilice 'guestfish -N list' para obtener un listado con los valores posibles " "del parámetro -N.\n" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "guestfish: error al crear la imagen de disco preparada '%s' en '%s':" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 msgid "failed to allocate disk" msgstr "falló al alojar el disco." -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "falló al particionar el disco: %s" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "falló al crear el sistema de archivos (%s): %s" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: error de protocolo: no se pudo leer el mensaje 'hello'\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " @@ -1975,19 +1975,19 @@ msgstr "" "servidor '%s' no concuerda con la versión del cliente '%s'. Ambas versiones " "deber coincidir de manera exacta.\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: remoto: parece ser que el servidor no se está ejecutando\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "" "guestfish: error de protocolo: no es posible enviar salutación inicial hacia " "el servidor\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "" @@ -2074,41 +2074,41 @@ msgstr "" msgid "virt-inspector: no image or VM names given" msgstr "virt-inspector: no han sido ofrecidas imágenes o nombres MV" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "la salida de --fish es posible solo con un SO\n" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 #, fuzzy msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "virt-inspector: no existe soporte para YAML\n" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 msgid " Mountpoints:\n" msgstr " Puntos de montaje:\n" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 msgid " Filesystems:\n" msgstr " Sistemas de archivos:\n" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr " Aliases de Modprobe:\n" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr " Módulos initrd:\n" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr " Aplicaciones:\n" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr " Kernels:\n" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr " Entradas de registro de Windows:\n" @@ -3021,6 +3021,9 @@ msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "" "virt-win-reg: {p}: no ha sido posible cargar el archivo de registro: {err}\n" +#~ msgid "test if file exists" +#~ msgstr "verifica si existe el archivo" + #~ msgid "could not parse size specification '%s'\n" #~ msgstr "no es posible analizar la especificación de tamaño '%s'\n" diff --git a/po/gu.po b/po/gu.po index 555af9b..3414275 100644 --- a/po/gu.po +++ b/po/gu.po @@ -8,10 +8,11 @@ msgstr "" "Project-Id-Version: libguestfs\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: 2010-02-02 13:45+0530\n" "Last-Translator: Sweta Kothari \n" "Language-Team: Gujarati\n" +"Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -461,9 +462,14 @@ msgstr "આદેશને પ્રક્રિયા કરવામાં વ msgid "is in configuration state" msgstr "રૂપરેખાંકન સ્થિતિમાં છે" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "ચકાસો જો ફાઇલ અસ્તિત્વ ધરાવે છે" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "ડિરેક્ટરીને બનાવો" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1327,7 +1333,7 @@ msgstr "%s: %s: સીમાની બહાર ઇંટિજર\n" msgid "%s: unknown command\n" msgstr "%s: અજ્ઞાત આદેશ\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "ફાઇલને સુધારવા માટે '%s filename' ને વાપરો\n" @@ -1342,7 +1348,7 @@ msgstr "વધારે જાણકારી માટે `%s --help' નો msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1371,7 +1377,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: મહેમાન ફાઇલસિસ્ટમ શેલ\n" "%s ચાલે તમે વર્ચ્યુઅલ મશીન ફાઇલસિસ્ટમોને સુધારો\n" @@ -1601,9 +1607,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "edit - ઇમેજમાં ફાઇલને સુધારો\n" " નો ફેરફાર કરો\n" @@ -1619,7 +1622,7 @@ msgstr "" " નોંધ: આ \\0 bytes ને સમાવતી વિશાળ ફાઇલો (> 2 MB) અથવા બાઇનરી ફાઇલો માટે " "ભરોસાપાત્ર કામ કરતુ નથી.\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1635,7 +1638,7 @@ msgstr "" " guestfish ની હાલની ડિરેક્ટરીને બનાવો. આ આદેશ એ ઉપયોગી છે જો તમે ચોક્કસ સ્થાનેથી " "ફાઇલોને ડાઉનલોડ કરવા માંગો તો.\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1651,7 +1654,7 @@ msgstr "" " Glob એ કોઇપણ આદેશ દલીલોમાં વિસ્તરેલ વાઇલ્ડકાર્ડો સાછે ને ચલાવે છે.\n" " નોંધો કે આ દેશ એ દરેક વિસ્તરેલ દલીલ માટે એકવાર વારંવાર ચાલે છે.\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1660,7 +1663,7 @@ msgid "" " Opens the manual page for guestfish.\n" msgstr "" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1671,8 +1674,8 @@ msgstr "" " help cmd\n" " મદદ\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1684,9 +1687,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "more - પેજરમાં ફાઇલને જુઓ\n" " વધારે \n" @@ -1702,7 +1702,7 @@ msgstr "" " નોંધ: આ \\0 બાઇટો ને સમાવતી મોટી ફાઇલો (> 2 MB) અથવા બાઇનરી ફાઇલો માટે ે કામ " "કરશે નહtes.\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1711,7 +1711,7 @@ msgstr "" "quit - guestfish માંથી બહાર નીકળો\n" " બહાર નીકળો\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1728,7 +1728,7 @@ msgstr "" "કારણ કે હેન્ડલ એ બરાબર રીતે બંધ થયેલ છે જ્યારે guestfish એ બહાર નીકળે છે ત્યારે. છતાંપણ આ " "ચકાસણી માટે અવારનવાર ઉપયોગી છે.\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, fuzzy, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1775,7 +1775,7 @@ msgstr "" " E અથવા એક્ઝાબાઇટોનો EB નંબર\n" " sects 512 બાઇટ સેક્ટરોનો નંબર\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1788,7 +1788,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1802,12 +1802,12 @@ msgstr "" "\n" " આ સામાન્ય રીતે ને ચલાવે છે, અને પછીથી પસાર થયેલ સમયને છાપે છે.\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "%s: આદેશ જાણીતો નથી, બધા આદેશોની યાદી માટે -h ને વાપરો\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1815,17 +1815,17 @@ msgid "" "For complete documentation: man guestfish\n" msgstr "" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "શબ્દમાળા \"%s\" માં દૂર થતો અવતરણચિહ્ન\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "'glob command [args...]' ને વાપરો\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: guestfs_glob_expand કોલ નિષ્ફળ: %s\n" @@ -1845,37 +1845,37 @@ msgstr "" msgid "the external 'man' program failed\n" msgstr "બહારનો આદેશ નિષ્ફળ: %s" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "ફાઇલ પાના માટે '%s filename' ને વાપરો\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" "\n" msgstr "" -#: fish/prep.c:117 +#: fish/prep.c:40 #, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr "" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1883,58 +1883,58 @@ msgid "" "For more information see the guestfish(1) manual.\n" msgstr "" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" "Use 'guestfish -N list' to list possible values for the -N parameter.\n" msgstr "" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 #, fuzzy msgid "failed to allocate disk" msgstr "ફાઇલનાં ટૂકડાને પદચ્છેદન કરવાનું નિષ્ફળ" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: પ્રોટોકોલ ભૂલ: 'hello' સંદેશને વાંચી શક્યા નહિં\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " "match client version '%s'. The two versions must match exactly.\n" msgstr "" -"guestfish: પ્રોટોકોલ ભૂલ: આવૃત્તિ બંધબેસતી નથી, સર્વર આવૃત્તિ '%s' એ ક્લાઇન્ટ આવૃત્તિ '%" -"s' સાથે બંધબેસતી નથી. બે આવૃત્તિઓ એ બરાબર રીતે બંધબેસતી હોવી જ જોઇએ.\n" +"guestfish: પ્રોટોકોલ ભૂલ: આવૃત્તિ બંધબેસતી નથી, સર્વર આવૃત્તિ '%s' એ ક્લાઇન્ટ આવૃત્તિ " +"'%s' સાથે બંધબેસતી નથી. બે આવૃત્તિઓ એ બરાબર રીતે બંધબેસતી હોવી જ જોઇએ.\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: દૂરસ્થ: એવુ લાગે છે કે સર્વર ચાલી રહ્યુ નથી\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "guestfish: પ્રોટોકોલ ભૂલ: સર્વરમાં પ્રારંભિત ગ્રીટિંગ મોકલી શક્યા નથી\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "guestfish: પ્રોટોકોલ ભૂલ: સર્વર માંથી જવાબને ડિકોડ કરી શક્યા નહિં\n" @@ -2017,42 +2017,42 @@ msgstr "%s: યજમાન ફાઇલસિસ્ટમમાં માઉન msgid "virt-inspector: no image or VM names given" msgstr "" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 #, fuzzy msgid " Mountpoints:\n" msgstr "માઉન્ટબિંદુઓને બતાવો" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 #, fuzzy msgid " Filesystems:\n" msgstr "ફાઇલસિસ્ટમને બનાવો" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr "" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr "" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr "" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr "" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr "" @@ -2880,6 +2880,9 @@ msgstr "" msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "" +#~ msgid "test if file exists" +#~ msgstr "ચકાસો જો ફાઇલ અસ્તિત્વ ધરાવે છે" + #~ msgid "could not parse size specification '%s'\n" #~ msgstr "વિશિષ્ટ માપ '%s' નું પદચ્છેદન કરી શકાતુ નથી\n" diff --git a/po/hi.po b/po/hi.po index 884060f..4c88489 100644 --- a/po/hi.po +++ b/po/hi.po @@ -8,10 +8,11 @@ msgstr "" "Project-Id-Version: libguestfs.master.libguestfs\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: 2010-02-16 12:57+0530\n" "Last-Translator: Rajesh Ranjan \n" "Language-Team: Hindi \n" +"Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -463,9 +464,14 @@ msgstr "कमांड की प्रक्रिया में व्य msgid "is in configuration state" msgstr "विन्यास स्थिति में है" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "जाँचें यदि फाइल मौजूद है" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "निर्देशिका बनाएँ" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1329,7 +1335,7 @@ msgstr "%s: %s: परिसर के बाहर पूर्णांक\n" msgid "%s: unknown command\n" msgstr "%s: अज्ञात कमांड\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "किसी फाइल के संपादन के लिए '%s filename' का प्रयोग करें\n" @@ -1344,7 +1350,7 @@ msgstr "अधिक सूचना के लिए `%s --help' आजमा msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1373,7 +1379,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" @@ -1604,9 +1610,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "edit - edit a file in the image\n" " edit \n" @@ -1622,7 +1625,7 @@ msgstr "" " NOTE: This will not work reliably for large files\n" " (> 2 MB) or binary files containing \\0 bytes.\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1639,7 +1642,7 @@ msgstr "" " useful if you want to download files to a particular\n" " place.\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1656,7 +1659,7 @@ msgstr "" " command args. Note that the command is run repeatedly\n" " once for each expanded argument.\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1665,7 +1668,7 @@ msgid "" " Opens the manual page for guestfish.\n" msgstr "" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1676,8 +1679,8 @@ msgstr "" " help cmd\n" " help\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1689,9 +1692,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "more - view a file in the pager\n" " more \n" @@ -1707,7 +1707,7 @@ msgstr "" " NOTE: This will not work reliably for large files\n" " (> 2 MB) or binary files containing \\0 bytes.\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1716,7 +1716,7 @@ msgstr "" "quit - quit guestfish\n" " quit\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1733,7 +1733,7 @@ msgstr "" "this normally, because the handle is closed properly when guestfish\n" "exits. However this is occasionally useful for testing.\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, fuzzy, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1781,7 +1781,7 @@ msgstr "" " E or EB number of exabytes\n" " sects number of 512 byte sectors\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1794,7 +1794,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1809,12 +1809,12 @@ msgstr "" " This runs as usual, and prints the elapsed\n" " time afterwards.\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "%s: command not known, use -h to list all commands\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1822,17 +1822,17 @@ msgid "" "For complete documentation: man guestfish\n" msgstr "" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "स्ट्रिंग में \"%s\" रवअवे उद्धरण\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "use 'glob command [args...]'\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: guestfs_glob_expand call failed: %s\n" @@ -1852,37 +1852,37 @@ msgstr "" msgid "the external 'man' program failed\n" msgstr "बाहरी कमांड विफल: %s" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "फाइल पेज करने के लिए '%s filename' का उपयोग करें\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" "\n" msgstr "" -#: fish/prep.c:117 +#: fish/prep.c:40 #, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr "" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1890,39 +1890,39 @@ msgid "" "For more information see the guestfish(1) manual.\n" msgstr "" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" "Use 'guestfish -N list' to list possible values for the -N parameter.\n" msgstr "" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 #, fuzzy msgid "failed to allocate disk" msgstr "फाइल के ढेर को विश्लेषित नहीं कर सका" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: protocol error: could not read 'hello' message\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " @@ -1931,17 +1931,17 @@ msgstr "" "guestfish: protocol error: version mismatch, server version '%s' does not " "match client version '%s'. The two versions must match exactly.\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: रिमोट: लगता है कि सर्वर नहीं चल रहा है\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "guestfish: प्रोटोकॉल त्रुटि: सर्वर को आरंभिक अभिवादन नहीं भेज सका\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "guestfish: प्रोटोकॉल त्रुटि: सर्वर से जवाब डिकोड नहीं कर सका\n" @@ -2024,42 +2024,42 @@ msgstr "%s: तुम्हें मेजबान फाइल सिस् msgid "virt-inspector: no image or VM names given" msgstr "" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 #, fuzzy msgid " Mountpoints:\n" msgstr "आरोहबिंदु दिखाएँ" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 #, fuzzy msgid " Filesystems:\n" msgstr "फाइलसिस्टम बनाएँ" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr "" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr "" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr "" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr "" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr "" @@ -2887,6 +2887,9 @@ msgstr "" msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "" +#~ msgid "test if file exists" +#~ msgstr "जाँचें यदि फाइल मौजूद है" + #~ msgid "could not parse size specification '%s'\n" #~ msgstr "आकार विशिष्टता '%s' विश्लेषित नहीं कर सका\n" diff --git a/po/kn.po b/po/kn.po index 706065c..289201a 100644 --- a/po/kn.po +++ b/po/kn.po @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: libguestfs 1.0.83\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: 2010-02-24 11:56+0530\n" "Last-Translator: Shankar Prasad \n" "Language-Team: kn-IN <>\n" +"Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -462,9 +463,14 @@ msgstr "ಒಂದು ಆಜ್ಞೆಯನ್ನು ಸಂಸ್ಕರಿಸು msgid "is in configuration state" msgstr "ಸಂರಚನೆಯ ಸ್ಥಿತಿಯಲ್ಲಿದೆ" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "ಕಡತವು ಅಸ್ತಿತ್ವದಲ್ಲಿದ್ದರೆ ಪರೀಕ್ಷಿಸು" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "ಒಂದು ಕೋಶವನ್ನು ರಚಿಸು" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1329,7 +1335,7 @@ msgstr "%s: %s: ಪೂರ್ಣಾಂಕವು ವ್ಯಾಪ್ತಿಯ ಹ msgid "%s: unknown command\n" msgstr "%s: ಗೊತ್ತಿರದ ಉದ್ದನೆಯ ಆಯ್ಕೆ: %s (%d)\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "ಒಂದು ಕಡತವನ್ನು ಸಂಪಾದಿಸಲು '%s filename' ಅನ್ನು ಬಳಸಿ\n" @@ -1344,7 +1350,7 @@ msgstr "ಹೆಚ್ಚಿನ ಮಾಹಿತಿಗಾಗಿ `%s -help' ಅನ msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1373,7 +1379,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: ಅತಿಥಿ ಕಡತವ್ಯವಸ್ಥೆ ಶೆಲ್\n" "%s ಎನ್ನುವುದು ನಿಮಗೆ ವರ್ಚುವಲ್ ಕಡತವ್ಯವಸ್ಥೆಗಳನ್ನು ಸಂಪಾದಿಸಲು ಅನುವು ಮಾಡಿಕೊಡುತ್ತದೆ\n" @@ -1605,9 +1611,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "edit - ಚಿತ್ರಿಕೆಯಲ್ಲಿನ ಕಡತವನ್ನು ಸಂಪಾದಿಸುತ್ತದೆ\n" " edit \n" @@ -1623,7 +1626,7 @@ msgstr "" " ಸೂಚನೆ: ಇದು ದೊಡ್ಡದಾದ ಕಡತಗಳಲ್ಲಿ (> 2 MB) ಅಥವ \\0 ಬೈಟ್‌ಗಳನ್ನು\n" " ಹೊಂದಿರುವ ಬೈನರಿ ಕಡತಗಳಲ್ಲಿ ಸಮರ್ಪಕವಾಗಿ ಕೆಲಸ ಮಾಡುವುದಿಲ್ಲ.\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1640,7 +1643,7 @@ msgstr "" " ಡೌನ್‌ಲೋಡ್ ಮಾಡಲು ನೀವು ಬಯಸಿದಲ್ಲಿ ಇದು\n" " ಸಹಾಯಕವಾಗುತ್ತದೆ.\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1657,7 +1660,7 @@ msgstr "" " ಅನ್ನು ಚಲಾಯಿಸುತ್ತದೆ. ಹಿಗ್ಗಿಸಲಾದ ಪ್ರತಿಯೊಂದು ಆರ್ಗ್ಯುಮೆಂಟ್‌ಗಳೊಂದಿಗೆ\n" " ಆಜ್ಞೆಯನ್ನು ಮತ್ತೆ ಮತ್ತೆ ಚಲಾಯಿಸಲಾಗುತ್ತದೆ ಎಂಬುದನ್ನು ನೆನಪಿಡಿ.\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1666,7 +1669,7 @@ msgid "" " Opens the manual page for guestfish.\n" msgstr "" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1677,8 +1680,8 @@ msgstr "" " help cmd\n" " help\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1690,9 +1693,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "more - ಕಡತವನ್ನು ಪೇಜರಿನಲ್ಲಿ ವೀಕ್ಷಿಸಿ\n" " more \n" @@ -1708,7 +1708,7 @@ msgstr "" " ಸೂಚನೆ: ಇದು ದೊಡ್ಡದಾದ ಕಡತಗಳಲ್ಲಿ (> 2 MB) ಅಥವ \\0 ಬೈಟ್‌ಗಳನ್ನು\n" " ಹೊಂದಿರುವ ಬೈನರಿ ಕಡತಗಳಲ್ಲಿ ಸಮರ್ಪಕವಾಗಿ ಕೆಲಸ ಮಾಡುವುದಿಲ್ಲ.\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1717,7 +1717,7 @@ msgstr "" "quit - guestfish ಇಂದ ನಿರ್ಗಮಿಸು \n" " quit\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1734,7 +1734,7 @@ msgstr "" "ಅಗತ್ಯವಿರುವುದಿಲ್ಲ, ಏಕೆಂದರೆ guestfish ನಿರ್ಗಮಿಸಿದಾಗ ಹ್ಯಾಂಡಲ್ ಸರಿಯಾಗಿ ಮುಚ್ಚಲ್ಪಡುತ್ತದೆ.\n" "ಆದರೆ ಇದು ಪರೀಕ್ಷಿಸುವ ಕಾರ್ಯದಲ್ಲಿ ಒಮ್ಮೊಮ್ಮೆ ಉಪಯೋಗಕ್ಕೆ ಬರುತ್ತದೆ.\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, fuzzy, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1780,7 +1780,7 @@ msgstr "" " E ಅಥವ EB ಎಕ್ಸಾಬೈಟ್‌ಗಳ ಸಂಖ್ಯೆ\n" " sects 512 ಬೈಟ್‌ ವಿಭಾಗಗಳ ಸಂಖ್ಯೆ\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1793,7 +1793,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1808,12 +1808,12 @@ msgstr "" " ಇದು ಅನ್ನು ಸಾಮಾನ್ಯ ಕ್ರಮದಲ್ಲಿಯೆ ಚಲಾಯಿಸುತ್ತದೆ, ಹಾಗು\n" " ಕೊನೆಯಲ್ಲಿ ತಗುಲಿದ ಸಮಯವನ್ನು ತೋರಿಸುತ್ತದೆ.\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "%s: ಆಜ್ಞೆಯು ತಿಳಿದಿಲ್ಲ, ಎಲ್ಲಾ ಆಜ್ಞೆಗಳ ಪಟ್ಟಿಯನ್ನು ತೋರಿಸಲು -h ಉಪಯೋಗಿಸಿ\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1821,17 +1821,17 @@ msgid "" "For complete documentation: man guestfish\n" msgstr "" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "\"%s\" ಎಂಬ ವಾಕ್ಯದಲ್ಲಿ ರನ್‌ಅವೆ ಕೋಟ್\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "'glob command [args...]' ಅನ್ನು ಬಳಸು\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: guestfs_glob_expand ಅನ್ನು ಕರೆಯಲು ವಿಫಲಗೊಂಡಿದೆ: %s\n" @@ -1851,37 +1851,37 @@ msgstr "" msgid "the external 'man' program failed\n" msgstr "ಬಾಹ್ಯ ಆಜ್ಞೆಯು ವಿಫಲಗೊಂಡಿದೆ: %s" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "ಒಂದು ಕಡತವನ್ನು ಪುಟವಾಗಿ(ಪೇಜ್) ಮಾಡಲು '%s filename' ಅನ್ನು ಬಳಸಿ\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" "\n" msgstr "" -#: fish/prep.c:117 +#: fish/prep.c:40 #, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr "" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1889,61 +1889,61 @@ msgid "" "For more information see the guestfish(1) manual.\n" msgstr "" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" "Use 'guestfish -N list' to list possible values for the -N parameter.\n" msgstr "" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 #, fuzzy msgid "failed to allocate disk" msgstr "ಕಡತದ ತುಣುಕನ್ನು ಪಾರ್ಸ್ ಮಾಡಲು ಸಾಧ್ಯವಾಗಿಲ್ಲ" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: ಪ್ರೊಟೊಕಾಲ್ ದೋಷ: 'hello' ಸಂದೇಶವನ್ನು ಓದಲು ಸಾಧ್ಯವಾಗಿಲ್ಲ\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " "match client version '%s'. The two versions must match exactly.\n" msgstr "" -"guestfish: ಪ್ರೊಟೊಕಾಲ್ ದೋಷ: ಆವೃತ್ತಿ ತಾಳೆಯಾಗುತ್ತಿಲ್ಲ, '%s' ಎಂಬ ಪರಿಚಾರಕದ ಆವೃತ್ತಿಯು '%" -"s' ಎಂಬ ಕ್ಲೈಂಟಿನ ಆವೃತ್ತಿಯೊಂದಿಗೆ ತಾಳೆಯಾಗುತ್ತಿಲ್ಲ. ಎರಡೂ ಆವೃತ್ತಿಗಳು ಸರಿಯಾಗೆ " +"guestfish: ಪ್ರೊಟೊಕಾಲ್ ದೋಷ: ಆವೃತ್ತಿ ತಾಳೆಯಾಗುತ್ತಿಲ್ಲ, '%s' ಎಂಬ ಪರಿಚಾರಕದ ಆವೃತ್ತಿಯು " +"'%s' ಎಂಬ ಕ್ಲೈಂಟಿನ ಆವೃತ್ತಿಯೊಂದಿಗೆ ತಾಳೆಯಾಗುತ್ತಿಲ್ಲ. ಎರಡೂ ಆವೃತ್ತಿಗಳು ಸರಿಯಾಗೆ " "ತಾಳೆಯಾಗಬೇಕು.\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: ದೂರಸ್ಥ: ಪರಿಚಾರಕವು ಚಾಲನೆಯಲ್ಲಿ ಇಲ್ಲ ತೋರುತ್ತಿದೆ\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "" "guestfish: protocol error: ಪರಿಚಾರಕಕ್ಕೆ ಆರಂಭಿಕ ಸ್ವಾಗತ ಸಂದೇಶವನ್ನು ಕಳುಹಿಸಲು " "ಸಾಧ್ಯವಾಗಿಲ್ಲ\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "" @@ -2028,42 +2028,42 @@ msgstr "%s: ಆತಿಥೇಯ ಕಡತವ್ಯವಸ್ಥೆಯಲ್ಲಿ msgid "virt-inspector: no image or VM names given" msgstr "" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 #, fuzzy msgid " Mountpoints:\n" msgstr "ಆರೋಹಣಾತಾಣವನ್ನು ತೋರಿಸು" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 #, fuzzy msgid " Filesystems:\n" msgstr "ಕಡತವ್ಯವಸ್ಥೆಯನ್ನು ರಚಿಸು" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr "" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr "" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr "" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr "" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr "" @@ -2896,6 +2896,9 @@ msgstr "" msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "" +#~ msgid "test if file exists" +#~ msgstr "ಕಡತವು ಅಸ್ತಿತ್ವದಲ್ಲಿದ್ದರೆ ಪರೀಕ್ಷಿಸು" + #~ msgid "could not parse size specification '%s'\n" #~ msgstr "ಗಾತ್ರದ ವಿಶಿಷ್ಟತೆ '%s' ಅನ್ನು ಪಾರ್ಸ್ ಮಾಡಲು ಸಾಧ್ಯವಾಗಿಲ್ಲ \n" diff --git a/po/libguestfs.pot b/po/libguestfs.pot index 0a795fe..23c44c4 100644 --- a/po/libguestfs.pot +++ b/po/libguestfs.pot @@ -6,13 +6,14 @@ #, fuzzy msgid "" msgstr "" -"Project-Id-Version: libguestfs 1.4.5\n" +"Project-Id-Version: libguestfs 1.4.6\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" +"Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" @@ -450,8 +451,12 @@ msgstr "" msgid "is in configuration state" msgstr "" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" +#: fish/cmds.c:149 fish/cmds.c:698 +msgid "test if a directory" +msgstr "" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 @@ -1300,7 +1305,7 @@ msgstr "" msgid "%s: unknown command\n" msgstr "" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "" @@ -1315,7 +1320,7 @@ msgstr "" msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1344,7 +1349,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" #: fish/fish.c:189 fuse/guestmount.c:977 @@ -1530,12 +1535,9 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1546,7 +1548,7 @@ msgid "" " place.\n" msgstr "" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1557,7 +1559,7 @@ msgid "" " once for each expanded argument.\n" msgstr "" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1566,7 +1568,7 @@ msgid "" " Opens the manual page for guestfish.\n" msgstr "" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1574,7 +1576,7 @@ msgid "" " help\n" msgstr "" -#: fish/fish.c:1158 +#: fish/fish.c:1155 #, c-format msgid "" "more - view a file in the pager\n" @@ -1587,19 +1589,16 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" " quit\n" msgstr "" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1610,7 +1609,7 @@ msgid "" "exits. However this is occasionally useful for testing.\n" msgstr "" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1632,7 +1631,7 @@ msgid "" " Size can be specified using standard suffixes, eg. '1M'.\n" msgstr "" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1645,7 +1644,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1655,12 +1654,12 @@ msgid "" " time afterwards.\n" msgstr "" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1668,17 +1667,17 @@ msgid "" "For complete documentation: man guestfish\n" msgstr "" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "" @@ -1698,37 +1697,37 @@ msgstr "" msgid "the external 'man' program failed\n" msgstr "" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" "\n" msgstr "" -#: fish/prep.c:117 +#: fish/prep.c:40 #, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr "" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1736,55 +1735,55 @@ msgid "" "For more information see the guestfish(1) manual.\n" msgstr "" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" "Use 'guestfish -N list' to list possible values for the -N parameter.\n" msgstr "" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 msgid "failed to allocate disk" msgstr "" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " "match client version '%s'. The two versions must match exactly.\n" msgstr "" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "" @@ -1849,40 +1848,40 @@ msgstr "" msgid "virt-inspector: no image or VM names given" msgstr "" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 msgid " Mountpoints:\n" msgstr "" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 msgid " Filesystems:\n" msgstr "" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr "" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr "" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr "" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr "" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr "" diff --git a/po/ml.po b/po/ml.po index a7164aa..869d825 100644 --- a/po/ml.po +++ b/po/ml.po @@ -8,11 +8,12 @@ msgstr "" "Project-Id-Version: libguestfs.master.libguestfs.ml\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: 2010-02-02 18:35+0530\n" "Last-Translator: Ani Peter | അനി പീറ്റര്‍ \n" "Language-Team: Swathanthra Malayalam Computing | സ്വതന്ത്ര മലയാളം കമ്പ്യൂട്ടിങ് \n" +"Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -462,9 +463,14 @@ msgstr "കമാന്‍ഡ് പ്രവര്‍ത്തിപ്പി msgid "is in configuration state" msgstr "ക്രമീകരണ അവസ്ഥയില്‍" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "ഫയല്‍ നിലവിലുണ്ടെങ്കില്‍ പരീക്ഷിക്കുക" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "ഒരു ഡയറക്ടറി ഉണ്ടാക്കുക" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1331,7 +1337,7 @@ msgstr "%s: %s: ഇന്റിജര്‍ പരിധികഴിഞ്ഞി msgid "%s: unknown command\n" msgstr "%s: അപരിചിതമായ കമാന്‍ഡ്\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "ഒരു ഫയല്‍ ചിട്ടപ്പെടുത്തുന്നതിനായി '%s filename' ഉപയോഗിക്കുക\n" @@ -1346,7 +1352,7 @@ msgstr "കൂടുതല്‍ വിവരങ്ങള്‍ക്കായ msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1375,7 +1381,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" @@ -1607,9 +1613,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "edit - edit a file in the image\n" " edit \n" @@ -1625,7 +1628,7 @@ msgstr "" " NOTE: This will not work reliably for large files\n" " (> 2 MB) or binary files containing \\0 bytes.\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1642,7 +1645,7 @@ msgstr "" " ഫയലുകള്‍ ഡൌണ്‍ലോഡ് ചെയ്യുന്നതിനായി ഈ കമാന്‍ഡ്\n" " ഉപയോഗപ്പെടുന്നു.\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1659,7 +1662,7 @@ msgstr "" " Glob പ്രവര്‍ത്തിപ്പിക്കുന്നു. ഓരോ വികസിച്ച ആര്‍ഗ്യുമെന്റിനും\n" " കമാന്‍ഡ് ഓരോ തവണ ആവര്‍ത്തിക്കുന്നു.\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1668,7 +1671,7 @@ msgid "" " Opens the manual page for guestfish.\n" msgstr "" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1679,8 +1682,8 @@ msgstr "" " help cmd\n" " help\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1692,9 +1695,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "more - view a file in the pager\n" " more \n" @@ -1710,7 +1710,7 @@ msgstr "" " NOTE: This will not work reliably for large files\n" " (> 2 MB) or binary files containing \\0 bytes.\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1719,7 +1719,7 @@ msgstr "" "quit - quit guestfish\n" " quit\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1736,7 +1736,7 @@ msgstr "" "കാരണം guestfish പുറത്തുകടക്കുമ്പോള്‍ ഹാന്‍ഡില്‍ ശരിയായി അടയ്ക്കപ്പെടുന്നു.\n" "എന്നിരുന്നാലും , ചില പരീക്ഷണങ്ങള്‍ക്കായി ഇതു് ഉപയോഗപ്പെടുന്നു.\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, fuzzy, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1784,7 +1784,7 @@ msgstr "" " E or EB number of exabytes\n" " sects number of 512 byte sectors\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1797,7 +1797,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1812,12 +1812,12 @@ msgstr "" " പതിവു് പോലെ ഇതു് പ്രവര്‍ത്തിപ്പിക്കുന്നു, കൂടാതെ അതിനുശേഷമുള്ള\n" " സമയം പ്രിന്റ് ചെയ്യുന്നു.\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "%s: കമാന്‍ഡ് അപരിചിതം, എല്ലാ കമാന്‍ഡുകളും ലഭ്യമാക്കുന്നതിനായി -h ഉപയോഗിക്കുക\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1825,17 +1825,17 @@ msgid "" "For complete documentation: man guestfish\n" msgstr "" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "Runaway quote in string \"%s\"\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "'glob command [args...]' ഉപയോഗിക്കുക\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: guestfs_glob_expand കോള്‍ പരാജയപ്പെട്ടു: %s\n" @@ -1855,37 +1855,37 @@ msgstr "" msgid "the external 'man' program failed\n" msgstr "എക്സ്റ്റേണല്‍ കമാന്‍ഡ് പരാജയപ്പെട്ടു: %s" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "ഒരു ഫയല്‍ താളിലാക്കുന്നതിനായി '%s filename' ഉപയോഗിക്കുക\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" "\n" msgstr "" -#: fish/prep.c:117 +#: fish/prep.c:40 #, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr "" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1893,39 +1893,39 @@ msgid "" "For more information see the guestfish(1) manual.\n" msgstr "" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" "Use 'guestfish -N list' to list possible values for the -N parameter.\n" msgstr "" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 #, fuzzy msgid "failed to allocate disk" msgstr "ഫയല്‍ പാഴ്സ് ചെയ്യുന്നതില്‍ പരാജയപ്പെട്ടു" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: protocol error: 'hello' സന്ദേശം വായിക്കുവാന്‍ സാധ്യമല്ല\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " @@ -1934,18 +1934,18 @@ msgstr "" "guestfish: protocol error: പതിപ്പില്‍ പൊരുത്തപ്പേടു്, '%s' എന്ന സര്‍വര്‍ പതിപ്പു് ക്ലയന്റ് " "പതിപ്പു് '%s'-മായി പൊരുത്തപ്പെടുന്നില്ല. രണ്ടും ഒരേപോലെ ആയിരിക്കണം.\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: remote: സര്‍വര്‍ പ്രവര്‍ത്തിക്കുന്നില്ല\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "" "guestfish: protocol error: പ്രാരംഭ സന്ദേശം സര്‍വറിലേക്ക് അയയ്ക്കുവാന്‍ സാധ്യമായില്ല\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "guestfish: protocol error:സര്‍വറില്‍ നിന്നുള്ള മറുപടി ഡീക്കോഡ് ചെയ്യുവാന്‍ സാധ്യമല്ല\n" @@ -2028,42 +2028,42 @@ msgstr "%s: ഹോസ്റ്റ് ഫയല്‍സിസ്റ്റത് msgid "virt-inspector: no image or VM names given" msgstr "" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 #, fuzzy msgid " Mountpoints:\n" msgstr "മൌണ്ട് പോയിന്റുകള്‍ കാണിക്കുക" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 #, fuzzy msgid " Filesystems:\n" msgstr "ഒരു ഫയല്‍സിസ്റ്റം ഉണ്ടാക്കുക" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr "" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr "" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr "" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr "" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr "" @@ -2893,6 +2893,9 @@ msgstr "" msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "" +#~ msgid "test if file exists" +#~ msgstr "ഫയല്‍ നിലവിലുണ്ടെങ്കില്‍ പരീക്ഷിക്കുക" + #~ msgid "could not parse size specification '%s'\n" #~ msgstr "വ്യാപ്തിയുടെ വിവരണം '%s' പാഴ്സ് ചെയ്യുവാന്‍ സാധ്യമായില്ല\n" diff --git a/po/mr.po b/po/mr.po index b56a122..84049d4 100644 --- a/po/mr.po +++ b/po/mr.po @@ -8,10 +8,11 @@ msgstr "" "Project-Id-Version: mr\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: 2010-02-03 19:10+0530\n" "Last-Translator: Sandeep Shedmake \n" "Language-Team: Marathi \n" +"Language: mr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -461,9 +462,14 @@ msgstr "आदेश विश्लेषीत करण्यात व्य msgid "is in configuration state" msgstr "संरचना स्तरात आहे" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "फाइल अस्तित्वात आहे याची चाचणी करा" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "डिरेक्ट्री निर्माण करा" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1327,7 +1333,7 @@ msgstr "%s: %s: इंटीजर व्याप्तीच्या बा msgid "%s: unknown command\n" msgstr "%s: अपरिचीत आदेश\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "फाइल संपादीत करण्यासाठी '%s filename' याचा वापर करा\n" @@ -1342,7 +1348,7 @@ msgstr "अधिक माहितीसाठी `%s --help' वापरू msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1371,7 +1377,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" @@ -1601,9 +1607,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "edit - प्रतिमामधील फाइल संपादीत करा\n" " edit \n" @@ -1621,7 +1624,7 @@ msgstr "" " (> 2 MB) किंवा \\0 बाईट्स् समाविष्टीत बाईनरी फाइल्स् करीता यशस्वीरित्या कार्य करत " "नाही.\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1638,7 +1641,7 @@ msgstr "" " ठराविक स्थळावर फाइल्स् डाऊनलोड करण्यासाठी\n" " उपयोगी ठरतो.\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1655,7 +1658,7 @@ msgstr "" " चालवतो. लक्षात ठेवा आदेश दरवेळी प्रत्येक विस्तारीत घटकासाठी पुनः\n" " चालवले जाते.\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1664,7 +1667,7 @@ msgid "" " Opens the manual page for guestfish.\n" msgstr "" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1675,8 +1678,8 @@ msgstr "" " help cmd\n" " help\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1688,9 +1691,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "more - पृष्ठ स्वरूपात फाइल पहा\n" " more \n" @@ -1707,7 +1707,7 @@ msgstr "" " (> 2 MB) किंवा \\0 बाईट्स् समाविष्टीत बाईनरी फाइल्स् करीता यशस्वीपणे कार्य करत " "नाही.\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1716,7 +1716,7 @@ msgstr "" "quit - guestfish पासून बाहेर पडा\n" " quit\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1733,7 +1733,7 @@ msgstr "" ", परंतु guestfish बाहेर पडतेवेळी हँडल योग्यप्रकारे\n" " बंद होते. तरी याचा वापर औपचारीकपणे चाचणीवेळी होतो.\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, fuzzy, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1779,7 +1779,7 @@ msgstr "" " E किंवा EB एक्जाबाईट्समधील प्रमाण\n" " sects 512 बाईट सेक्टरचे प्रमाण\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1792,7 +1792,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1807,12 +1807,12 @@ msgstr "" " यामुळे साधारणपणे चालवले जाते, व व्याप्त वेळची\n" " नंतर छपाई केली जाते.\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "%s: आदेश परिचीत नाही, सर्व आदेश दाखवण्यासाठी -h याचा वापर करा\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1820,17 +1820,17 @@ msgid "" "For complete documentation: man guestfish\n" msgstr "" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "\"%s\" अक्षरमाळामध्ये रनअव्हे शब्द आढळले\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "'glob command [args...]' वापर करा\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: guestfs_glob_expand कॉल अपयशी: %s\n" @@ -1850,37 +1850,37 @@ msgstr "" msgid "the external 'man' program failed\n" msgstr "बाहेरील आदेश अपयशी: %s" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "फाइल पेज करण्यासाठी '%s filename' याचा वापर करा\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" "\n" msgstr "" -#: fish/prep.c:117 +#: fish/prep.c:40 #, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr "" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1888,39 +1888,39 @@ msgid "" "For more information see the guestfish(1) manual.\n" msgstr "" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" "Use 'guestfish -N list' to list possible values for the -N parameter.\n" msgstr "" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 #, fuzzy msgid "failed to allocate disk" msgstr "फाइल खंड वाचण्यास अपयशी" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: प्रोटोकॉल त्रुटी: 'hello' संदेश वाचणे अशक्य\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " @@ -1929,17 +1929,17 @@ msgstr "" "guestfish: प्रोटोकॉल त्रुटी: आवृत्ती जुळली नाही, सर्व्हर आवृत्ती '%s' क्लाएंट आवृत्ती '%s' " "सह जुळत नाही. दोन्ही आवृत्ती बरोबर जुळायला हवे.\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: रिमोट: सर्व्हर कार्यरत नाही असे आढळते\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "guestfish: प्रोटोकॉल त्रुटी: प्रारंभीक ग्रिटींग सर्व्हरकडे पाठवणे अशक्य\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "guestfish: प्रोटोकॉल त्रुटी: सर्व्हर पासून प्रतिसाद डिकोड करण्यास अशक्य\n" @@ -2022,42 +2022,42 @@ msgstr "%s: यजमान फाइलप्रणालीत तुम्ह msgid "virt-inspector: no image or VM names given" msgstr "" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 #, fuzzy msgid " Mountpoints:\n" msgstr "माऊंटपॉईंट्स् दाखवा" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 #, fuzzy msgid " Filesystems:\n" msgstr "फाइलप्रणाली निर्माण करा" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr "" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr "" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr "" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr "" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr "" @@ -2885,6 +2885,9 @@ msgstr "" msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "" +#~ msgid "test if file exists" +#~ msgstr "फाइल अस्तित्वात आहे याची चाचणी करा" + #~ msgid "could not parse size specification '%s'\n" #~ msgstr "आकार संरचना '%s' वाचणे अशक्य\n" diff --git a/po/or.po b/po/or.po index 0c07a3d..482c7e9 100644 --- a/po/or.po +++ b/po/or.po @@ -8,10 +8,11 @@ msgstr "" "Project-Id-Version: libguestfs.master.or\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: 2010-02-01 18:17+0530\n" "Last-Translator: Manoj Kumar Giri \n" "Language-Team: Oriya \n" +"Language: or\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -464,9 +465,14 @@ msgstr "ଗୋଟିଏ ନିର୍ଦ୍ଦେଶକୁ କାର୍ଯ୍ୟ msgid "is in configuration state" msgstr "ବିନ୍ୟାସ ଅବସ୍ଥାରେ ଅଛି" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "ଫାଇଲ ଅବସ୍ଥିତ ଥିଲେ ପରୀକ୍ଷା କରନ୍ତୁ" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "ଗୋଟିଏ ଡିରେକ୍ଟୋରୀ ନିର୍ମାଣ କରନ୍ତୁ" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1331,7 +1337,7 @@ msgstr "%s: %s: ଗଣନସଂଖ୍ୟାଟି ପରିସର ବାହା msgid "%s: unknown command\n" msgstr "%s: ଅଜଣା ନିର୍ଦ୍ଦେଶ\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "ଗୋଟିଏ ଫାଇଲକୁ ସମ୍ପାଦନ କରିବା ପାଇଁ '%s filename' କୁ ବ୍ୟବହାର କରନ୍ତୁ\n" @@ -1346,7 +1352,7 @@ msgstr "ଅଧିକ ସୂଚନା ପାଇଁ `%s --help' କୁ ଚେଷ msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1375,7 +1381,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: ଅତିଥି ଫାଇଲତନ୍ତ୍ର shell\n" "%s ଆପଣଙ୍କୁ ଆଭାସୀ ଯନ୍ତ୍ର ଫାଇଲତନ୍ତ୍ରଗୁଡ଼ିକୁ ସମ୍ପାଦନ କରିବା ପାଇଁ ଅନୁମତି ଦେଇଥାଏ\n" @@ -1606,9 +1612,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "ସମ୍ପାଦନ କରନ୍ତୁ - ପ୍ରତିଛବିରେ ଗୋଟିଏ ଫାଇଲକୁ ସମ୍ପାଦନ କରନ୍ତୁ\n" " ସମ୍ପାଦନ କରନ୍ତୁ \n" @@ -1624,7 +1627,7 @@ msgstr "" " ଟିପ୍ପଣୀ: ଏହା ବୃହତ ଫାଇଲଗୁଡ଼ିକ ପାଇଁ ବିଶ୍ୱସ୍ତ ଭାବରେ କାର୍ଯ୍ୟ କରିନଥାଏ\n" " (> 2 MB) ଅଥବା \\0 ବାଇଟ ଧାରଣ କରିଥିବା ଦ୍ୱିମିକ ଫାଇଲ ପାଇଁ।\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1641,7 +1644,7 @@ msgstr "" " ଯଦି ଆପଣ ଫାଇଲଗୁଡ଼ିକୁ ଗୋଟିଏ ନିର୍ଦ୍ଦିଷ୍ଟ ସ୍ଥାନରେ\n" " ଆହରଣ କରିବାକୁ ଚାହୁଁଥାନ୍ତି।\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1659,7 +1662,7 @@ msgstr "" "ନିର୍ଦ୍ଦେଶଟି ବାରମ୍ବାର ଚାଲିଥାଏ\n" " ପ୍ରତ୍ୟେକ ବିସ୍ତୃତ ସ୍ୱତନ୍ତ୍ରଚର ପାଇଁ ଥରେ।\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1668,7 +1671,7 @@ msgid "" " Opens the manual page for guestfish.\n" msgstr "" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1679,8 +1682,8 @@ msgstr "" " ସହାୟତା cmd\n" " ସହାୟତା\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1692,9 +1695,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "ଅଧିକ - ପେଜରରେ ଗୋଟିଏ ଫାଇଲକୁ ଦେଖନ୍ତୁ\n" " ଅଧିକ \n" @@ -1710,7 +1710,7 @@ msgstr "" " ଟିପ୍ପଣୀ: ଏହା ବୃହତ ଫାଇଲ ପାଇଁ ବିଶ୍ୱସ୍ତ ଭାବରେ କାର୍ଯ୍ୟକରିନଥାଏ\n" " (> 2 MB) କିମ୍ବା ଦ୍ୱମିକ ଫାଇଲଗୁଡ଼ିକ \\0 ବାଇଟ ଧାରଣ କରିଥାଏ।\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1719,7 +1719,7 @@ msgstr "" "ପ୍ରସ୍ଥାନ କରନ୍ତୁ - guestfish ରୁ ପ୍ରସ୍ଥାନ କରନ୍ତୁ\n" " ପ୍ରସ୍ଥାନ କରନ୍ତୁ\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1737,7 +1737,7 @@ msgstr "" ", କାରଣ ନିୟନ୍ତ୍ରଣଟି ସଠିକ ଭାବରେ ବନ୍ଦ ହୋଇନାହିଁ ଯେତେବେଳେ guestfish\n" "ପ୍ରସ୍ଥାନ କରିଥାଏ। ତଥାପି ଏହା ବେଳେବେଳେ ପରୀକ୍ଷା ପାଇଁ ବ୍ୟବହାର ହୋଇଥାଏ।\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, fuzzy, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1785,7 +1785,7 @@ msgstr "" " E ଅଥବା EB ଏକ୍ସାବାଇଟ ସଂଖ୍ୟା\n" " sects 512 ବାଇଟ ବିଭାଗ ସଂଖ୍ୟା\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1798,7 +1798,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1813,13 +1813,13 @@ msgstr "" " ଏହା କୁ ସେହିପରି ଚଲାଇଥାଏ, ଏବଂ ସମାପ୍ତ ହୋଇଥିବା ସମୟକୁ ପରବର୍ତ୍ତି ସମୟରେ\n" " ମୁଦ୍ରଣ କରିଥାଏ।\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "" "%s: ନିର୍ଦ୍ଦେଶଟି ପରିଚିତ ନୁହଁ, ସମସ୍ତ ନିର୍ଦ୍ଦେଶଗୁଡ଼ିକୁ ତାଲିକାଭୁକ୍ତ କରିବା ପାଇଁ -h କୁ ବ୍ୟବହାର କରନ୍ତୁ\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1827,17 +1827,17 @@ msgid "" "For complete documentation: man guestfish\n" msgstr "" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "ବାକ୍ୟଖଣ୍ଡ \"%s\" ରେ ପଳାୟନ ଟିପ୍ପଣୀ\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "'glob command [args...]' କୁ ବ୍ୟବହାର କରନ୍ତୁ\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: guestfs_glob_expand ଡ଼ାକ ବିଫଳ ହୋଇଛି: %s\n" @@ -1857,37 +1857,37 @@ msgstr "" msgid "the external 'man' program failed\n" msgstr "ବାହ୍ୟ ନିର୍ଦ୍ଦେଶ ବିଫଳ ହୋଇଛି: %s" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "ଗୋଟିଏ ଫାଇଲକୁ ପୃଷ୍ଠା ସଂଖ୍ୟା ଦେବା ପାଇଁ '%s filename' କୁ ବ୍ୟବହାର କରନ୍ତୁ\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" "\n" msgstr "" -#: fish/prep.c:117 +#: fish/prep.c:40 #, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr "" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1895,39 +1895,39 @@ msgid "" "For more information see the guestfish(1) manual.\n" msgstr "" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" "Use 'guestfish -N list' to list possible values for the -N parameter.\n" msgstr "" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 #, fuzzy msgid "failed to allocate disk" msgstr "ଫାଇଲ ମାଳାକୁ ବିଶ୍ଳେଷଣ କରିବାରେ ବିଫଳ" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: ପ୍ରଟୋକଲ ତ୍ରୁଟି: 'hello' ସନ୍ଦେଶ ପଢ଼ିପାରିଲା ନାହିଁ\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " @@ -1936,17 +1936,17 @@ msgstr "" "guestfish: ପ୍ରଟୋକଲ ତ୍ରୁଟି: ସଂସ୍କରଣ ଅମେଳ, ସର୍ଭର ସଂସ୍କରଣ '%s' କ୍ଲାଏଣ୍ଟ ସଂସ୍କରଣ '%s' ସହିତ " "ମେଳଖାଉନାହିଁ। ଦୁଇଟି ସଂସ୍କରଣ ମେଳଖାଉଥିବା ଉଚିତ।\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: remote: ସର୍ଭର ଚାଲୁନଥିବା ପରି ଲାଗୁଅଛି\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "guestfish: ପ୍ରଟୋକଲ ତ୍ରୁଟି: ସର୍ଭରକୁ ପ୍ରାରମ୍ଭିକ ଆମନ୍ତ୍ରଣ ପଠାଇପାରିଲା ନାହିଁ\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "guestfish: ପ୍ରଟୋକଲ ତ୍ରୁଟି: ସର୍ଭରରୁ ଉତ୍ତରକୁ ସଙ୍କେତହୀନ କରିପାରିଲା ନାହିଁ\n" @@ -2029,42 +2029,42 @@ msgstr "%s: ଆପଣଙ୍କୁ ହୋଷ୍ଟ ଫାଇଲତନ୍ତ୍ର msgid "virt-inspector: no image or VM names given" msgstr "" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 #, fuzzy msgid " Mountpoints:\n" msgstr "ସ୍ଥାପନ ବିନ୍ଦୁଗୁଡ଼ିକୁ ଦର୍ଶାନ୍ତୁ" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 #, fuzzy msgid " Filesystems:\n" msgstr "ଗୋଟିଏ ଫାଇଲ ତନ୍ତ୍ର ତିଆରି କରନ୍ତୁ" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr "" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr "" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr "" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr "" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr "" @@ -2892,6 +2892,9 @@ msgstr "" msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "" +#~ msgid "test if file exists" +#~ msgstr "ଫାଇଲ ଅବସ୍ଥିତ ଥିଲେ ପରୀକ୍ଷା କରନ୍ତୁ" + #~ msgid "could not parse size specification '%s'\n" #~ msgstr "ଆକାର ବିଶେଷ ଦ୍ରଷ୍ଟବ୍ୟ '%s' କୁ ବିଶ୍ଳେଷଣ କରିପାରିଲା ନାହିଁ\n" diff --git a/po/pa.po b/po/pa.po index 857bdda..fef839d 100644 --- a/po/pa.po +++ b/po/pa.po @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: libguestfs 1.0.81\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: 2010-01-29 12:50+0530\n" "Last-Translator: Jaswinder Singh \n" "Language-Team: Punjabi/Panjabi \n" +"Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -461,9 +462,14 @@ msgstr "ਕੀ ਇੱਕ ਕਮਾਂਡ ਚਲਾਉਣ ਵਿੱਚ ਰੁੱ msgid "is in configuration state" msgstr "ਸੰਰਚਨਾ ਸਥਿਤੀ ਵਿੱਚ ਹੈ" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "ਵੇਖੋ ਕੀ ਫਾਇਲ ਮੌਜੂਦ ਹੈ" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "ਇੱਕ ਡਾਇਰੈਕਟਰੀ ਬਣਾਓ" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1329,7 +1335,7 @@ msgstr "" msgid "%s: unknown command\n" msgstr "%s: ਅਣਜਾਣ ਕਮਾਂਡ\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "ਇੱਕ ਫਾਇਲ ਸੋਧ ਕਰਨ ਲਈ '%s filename' ਵਰਤੋ\n" @@ -1344,7 +1350,7 @@ msgstr "ਵਧੇਰੇ ਜਾਣਕਾਰੀ ਲਈ `%s --help' ਵਰਤੋ। msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1373,7 +1379,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" @@ -1604,9 +1610,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "edit - edit a file in the image\n" " edit \n" @@ -1622,7 +1625,7 @@ msgstr "" " NOTE: This will not work reliably for large files\n" " (> 2 MB) or binary files containing \\0 bytes.\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1639,7 +1642,7 @@ msgstr "" " useful if you want to download files to a particular\n" " place.\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1656,7 +1659,7 @@ msgstr "" " command args. Note that the command is run repeatedly\n" " once for each expanded argument.\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1665,7 +1668,7 @@ msgid "" " Opens the manual page for guestfish.\n" msgstr "" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1676,8 +1679,8 @@ msgstr "" " help cmd\n" " help\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1689,9 +1692,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "more - view a file in the pager\n" " more \n" @@ -1707,7 +1707,7 @@ msgstr "" " NOTE: This will not work reliably for large files\n" " (> 2 MB) or binary files containing \\0 bytes.\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1716,7 +1716,7 @@ msgstr "" "quit - quit guestfish\n" " quit\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1733,7 +1733,7 @@ msgstr "" "this normally, because the handle is closed properly when guestfish\n" "exits. However this is occasionally useful for testing.\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, fuzzy, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1781,7 +1781,7 @@ msgstr "" " E or EB number of exabytes\n" " sects number of 512 byte sectors\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1794,7 +1794,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1809,12 +1809,12 @@ msgstr "" " This runs as usual, and prints the elapsed\n" " time afterwards.\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "%s: command not known, use -h to list all commands\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1822,17 +1822,17 @@ msgid "" "For complete documentation: man guestfish\n" msgstr "" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "ਸਤਰ \"%s\" ਵਿੱਚ ਗਲਤ ਸ਼ਬਦਾਵਲੀ ਹੈ\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "use 'glob command [args...]'\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: guestfs_glob_expand call failed: %s\n" @@ -1852,37 +1852,37 @@ msgstr "" msgid "the external 'man' program failed\n" msgstr "ਬਾਹਰੀ ਕਮਾਂਡ ਫੇਲ ਹੋਈ: %s" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "ਫਾਇਲ ਪੇਜ਼ ਕਰਨ ਲਈ '%s filename' ਵਰਤੋ\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" "\n" msgstr "" -#: fish/prep.c:117 +#: fish/prep.c:40 #, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr "" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1890,39 +1890,39 @@ msgid "" "For more information see the guestfish(1) manual.\n" msgstr "" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" "Use 'guestfish -N list' to list possible values for the -N parameter.\n" msgstr "" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 #, fuzzy msgid "failed to allocate disk" msgstr "ਫਾਇਲ ਚੰਕ ਪਾਰਸ ਕਰਨ ਵਿੱਚ ਫੇਲ ਹੋਇਆ" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: protocol error: could not read 'hello' message\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " @@ -1931,17 +1931,17 @@ msgstr "" "guestfish: protocol error: version mismatch, server version '%s' does not " "match client version '%s'. The two versions must match exactly.\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: ਰਿਮੋਟ: ਇੰਜ ਲਗਦਾ ਹੈ ਜਿਵੇਂ ਸਰਵਰ ਨਹੀਂ ਚੱਲ ਰਿਹਾ ਹੈ\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "guestfish: ਪਰੋਟੋਕਾਲ ਗਲਤੀ: ਸਰਵਰ ਨੂੰ ਸ਼ੁਰੂਆਤੀ ਸਵਾਗਤ ਨਹੀਂ ਭੇਜ ਸਕਦਾ\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "guestfish: ਪਰੋਟੋਕਾਲ ਗਲਤੀ: ਸਰਵਰ ਤੋਂ ਜਵਾਬ ਡੀਕੋਡ ਨਹੀਂ ਕਰ ਸਕਦਾ\n" @@ -2024,42 +2024,42 @@ msgstr "%s: ਤੁਹਾਨੂੰ ਹੋਸਟ ਫਾਇਲ-ਸਿਸਟਮ ਵ msgid "virt-inspector: no image or VM names given" msgstr "" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 #, fuzzy msgid " Mountpoints:\n" msgstr "ਮਾਊਂਟ ਪੁਆਂਇਟ ਵੇਖਾਓ" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 #, fuzzy msgid " Filesystems:\n" msgstr "ਇੱਕ ਫਾਇਲ-ਸਿਸਟਮ ਬਣਾਓ" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr "" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr "" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr "" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr "" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr "" @@ -2887,6 +2887,9 @@ msgstr "" msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "" +#~ msgid "test if file exists" +#~ msgstr "ਵੇਖੋ ਕੀ ਫਾਇਲ ਮੌਜੂਦ ਹੈ" + #~ msgid "could not parse size specification '%s'\n" #~ msgstr "ਅਕਾਰ ਨਿਰਧਾਰਨ '%s' ਨੂੰ ਪਾਰਸ ਨਹੀਂ ਕਰ ਸਕਦਾ\n" diff --git a/po/pl.po b/po/pl.po index 1d39e04..4450c75 100644 --- a/po/pl.po +++ b/po/pl.po @@ -6,10 +6,11 @@ msgstr "" "Project-Id-Version: pl\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: 2010-05-24 21:26+0200\n" "Last-Translator: Piotr Drąg \n" "Language-Team: Polish \n" +"Language: pl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -452,9 +453,14 @@ msgstr "jest zajęte przetwarzaniem polecenia" msgid "is in configuration state" msgstr "jest w stanie konfiguracji" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "testuje, czy plik istnieje" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "tworzy katalog" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1316,7 +1322,7 @@ msgstr "%s: %s: liczba całkowita spoza zakresu\n" msgid "%s: unknown command\n" msgstr "%s: nieznane polecenie\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "należy użyć \"%s nazwa_pliku\", aby zmodyfikować plik\n" @@ -1327,11 +1333,11 @@ msgid "Try `%s --help' for more information.\n" msgstr "Należy spróbować \"%s --help\", aby uzyskać więcej informacji.\n" #: fish/fish.c:93 -#, c-format +#, fuzzy, c-format msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1360,7 +1366,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: powłoka systemu plików gościa\n" "%s umożliwia modyfikowanie systemów pliku maszyn wirtualnych\n" @@ -1595,7 +1601,7 @@ msgstr "" " Wyświetla ostatnie parametry w terminalu.\n" #: fish/fish.c:1109 -#, c-format +#, fuzzy, c-format msgid "" "edit - edit a file in the image\n" " edit \n" @@ -1607,9 +1613,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "edit - modyfikuje plik w obrazie\n" " edit \n" @@ -1626,7 +1629,7 @@ msgstr "" " UWAGA: nie będzie działało poprawnie dla dużych plików\n" " (> 2 MB) lub plików binarnych zawierających \\0 bajtów.\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1642,7 +1645,7 @@ msgstr "" " Zmienia bieżący katalog guestfish. Te polecenie jest\n" " przydatne, aby pobrać pliki do konkretnego miejsca.\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1660,7 +1663,7 @@ msgstr "" " Proszę zauważyć, że polecenie jest wykonywane\n" " raz dla każdego rozwiniętego parametru.\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1673,7 +1676,7 @@ msgstr "" "\n" " Otwiera stronę podręcznika dla programu guestfish.\n" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1684,8 +1687,8 @@ msgstr "" " help polecenie\n" " help\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1697,9 +1700,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "more - wyświetla plik w pagerze\n" " more \n" @@ -1715,7 +1715,7 @@ msgstr "" " UWAGA: nie będzie działało poprawnie dla dużych plików\n" " (> 2 MB) lub plików binarnych zawierających \\0 bajtów.\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1724,7 +1724,7 @@ msgstr "" "quit - kończy działanie programu guestfish\n" " quit\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1742,7 +1742,7 @@ msgstr "" "zamykany, kiedy guestfish kończy działanie. Mimo to może być czasem\n" "przydatne do testowania.\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1783,7 +1783,7 @@ msgstr "" " Rozmiar może być podawany używając standardowych\n" " przyrostków, np. \"1M\".\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1796,7 +1796,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1810,14 +1810,14 @@ msgstr "" "\n" " Wykonuje i wyświetla czas, jaki upłynął.\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "" "%s: nieznane polecenie, należy użyć -h, aby wyświetlić listę wszystkich " "poleceń\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1828,17 +1828,17 @@ msgstr "" "Lista poleceń: guestfish -h\n" "Pełna dokumentacja: man guestfish\n" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "Cytat ucieczki w ciągu \"%s\"\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "należy użyć \"glob polecenie [parametry...]\"\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: wywołanie guestfs_glob_expand nie powiodło się: %s\n" @@ -1858,12 +1858,12 @@ msgstr "należy użyć \"man\" bez parametrów, aby otworzyć podręcznik\n" msgid "the external 'man' program failed\n" msgstr "zewnętrzny program \"man\" nie powiódł się\n" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "należy użyć \"%s nazwa_pliku\", aby wyświetlić plik\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" @@ -1872,10 +1872,10 @@ msgstr "" "Lista dostępnych przygotowanych obrazów dysków:\n" "\n" -#: fish/prep.c:117 -#, c-format +#: fish/prep.c:40 +#, fuzzy, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" @@ -1883,17 +1883,17 @@ msgstr "" "\n" "%s\n" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr " Opcjonalne parametry:\n" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "<%s> %s (domyślnie: %s)\n" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1904,7 +1904,7 @@ msgstr "" "lokalnym. (\"test2.img\" itp.m jeśli podano opcję -N wiele razy).\n" "Więcej informacji można znaleźć w podręczniku guestfish(1).\n" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" @@ -1914,33 +1914,33 @@ msgstr "" "Należy użyć polecenia \"guestfish -N list\", aby wyświetlić listę możliwych\n" "wartości dla parametru -N.\n" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" "guestfish: błąd podczas tworzenia przygotowanego obrazu dysku \"%s\" na \"%s" "\": " -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 msgid "failed to allocate disk" msgstr "przydzielenie dysku nie powiodło się" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "partycjonowanie dysku nie powiodło się: %s" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "utworzenie systemu plików (%s) nie powiodło się: %s" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: błąd protokołu: nie można odczytać komunikatu \"hello\"\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " @@ -1950,19 +1950,19 @@ msgstr "" "zgadza się z wersją klienta \"%s\". Obie wersje muszą się dokładnie " "zgadzać.\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: zdalnie: serwer nie jest uruchomiony\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "" "guestfish: błąd protokołu: nie można wysłać początkowego powitania do " "serwera\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "" @@ -2048,41 +2048,41 @@ msgstr "%s: należy podać punkt montowania w systemie plików gospodarza\n" msgid "virt-inspector: no image or VM names given" msgstr "virt-inspector: nie podano nazw obrazu lub maszyny wirtualnej" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "wyjście --fish jest możliwe tylko z pojedynczym systemem operacyjnym\n" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 #, fuzzy msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "virt-inspector: brak obsługi YAML\n" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 msgid " Mountpoints:\n" msgstr " Punkty montowania:\n" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 msgid " Filesystems:\n" msgstr " Systemy plików:\n" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr " Aliasy modprobe:\n" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr " Moduły initrd:\n" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr " Aplikacje:\n" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr " Jądra:\n" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr " Wpisy rejestru systemu Windows:\n" @@ -2333,8 +2333,8 @@ msgstr "guestfs_end_busy: wywołano, kiedy w stanie %d" msgid "" "check_for_daemon_cancellation_or_eof: read 0x%x from daemon, expected 0x%x\n" msgstr "" -"check_for_daemon_cancellation_or_eof: odczytano 0x%x z demona, oczekiwano 0x%" -"x\n" +"check_for_daemon_cancellation_or_eof: odczytano 0x%x z demona, oczekiwano 0x" +"%x\n" #: src/proto.c:439 src/proto.c:493 msgid "unexpected end of file when reading from daemon" @@ -2982,3 +2982,6 @@ msgstr "virt-win-reg: {p}: nie można pobrać pliku rejestru: {err}\n" #, perl-brace-format msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "virt-win-reg: {p}: nie można wysłać pliku rejestru: {err}\n" + +#~ msgid "test if file exists" +#~ msgstr "testuje, czy plik istnieje" diff --git a/po/ta.po b/po/ta.po index 4b05a5e..3704475 100644 --- a/po/ta.po +++ b/po/ta.po @@ -7,10 +7,11 @@ msgstr "" "Project-Id-Version: libguestfs 1.0.81\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: 2010-01-29 13:38+0530\n" "Last-Translator: I. Felix \n" "Language-Team: ta_IN \n" +"Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -462,9 +463,14 @@ msgstr "ஒரு கட்டளையை செயல்படுத்து msgid "is in configuration state" msgstr "அது கட்டமைப்பு நிலையில் உள்ளது" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "கோப்பு இருந்தால் பரிசோதி" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "ஒரு அடைவினை உருவாக்கு" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1330,7 +1336,7 @@ msgstr "" msgid "%s: unknown command\n" msgstr "%s: தெரியாத கட்டளை\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "ஒரு கோப்பினை திருத்துவதற்கு '%s கோப்புபெயரை' பயன்படுத்து\n" @@ -1345,7 +1351,7 @@ msgstr "`%s --help' க்கான கூடுதல் தகவலுக் msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1374,7 +1380,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" @@ -1606,9 +1612,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "edit - edit a file in the image\n" " edit \n" @@ -1624,7 +1627,7 @@ msgstr "" " NOTE: This will not work reliably for large files\n" " (> 2 MB) or binary files containing \\0 bytes.\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1641,7 +1644,7 @@ msgstr "" " useful if you want to download files to a particular\n" " place.\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1658,7 +1661,7 @@ msgstr "" " command args. Note that the command is run repeatedly\n" " once for each expanded argument.\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1667,7 +1670,7 @@ msgid "" " Opens the manual page for guestfish.\n" msgstr "" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1678,8 +1681,8 @@ msgstr "" " help cmd\n" " help\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1691,9 +1694,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "more - view a file in the pager\n" " more \n" @@ -1709,7 +1709,7 @@ msgstr "" " NOTE: This will not work reliably for large files\n" " (> 2 MB) or binary files containing \\0 bytes.\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1718,7 +1718,7 @@ msgstr "" "quit - guestfishஐ நிறுத்து\n" " quit\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1735,7 +1735,7 @@ msgstr "" "this normally, because the handle is closed properly when guestfish\n" "exits. However this is occasionally useful for testing.\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, fuzzy, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1783,7 +1783,7 @@ msgstr "" " E or EB number of exabytes\n" " sects number of 512 byte sectors\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1796,7 +1796,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1811,13 +1811,13 @@ msgstr "" " இது எப்போதும் போல இயங்கும், நேரத்திற்கு பின்\n" " அச்சடித்தும் கழித்தும்விடும்.\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "" "%s: கட்டளை என்னவென்று தெரியவில்லை, அனைத்து கட்டளைகளையும் பட்டியலிட -hஐ பயன்படுத்து\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1825,17 +1825,17 @@ msgid "" "For complete documentation: man guestfish\n" msgstr "" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "Runaway quote in string \"%s\"\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "'glob கட்டளையைப் பயன்படுத்து [args...]'\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: guestfs_glob_expand அழைக்க முடியவில்லை: %s\n" @@ -1855,37 +1855,37 @@ msgstr "" msgid "the external 'man' program failed\n" msgstr "அகக் கட்டளை தோல்வியுற்றது: %s" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "'%s கோப்புபெயரை' ஒரு கோப்பில் பக்கத்திற்குப் பயன்படுத்து\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" "\n" msgstr "" -#: fish/prep.c:117 +#: fish/prep.c:40 #, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr "" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1893,39 +1893,39 @@ msgid "" "For more information see the guestfish(1) manual.\n" msgstr "" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" "Use 'guestfish -N list' to list possible values for the -N parameter.\n" msgstr "" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 #, fuzzy msgid "failed to allocate disk" msgstr "கோப்பு சங்க்கை பகுக்க முடியவில்லை" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: protocol error: 'hello' செய்தியை வாசிக்க முடியவில்லை\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " @@ -1934,18 +1934,18 @@ msgstr "" "guestfish: protocol error: பதிப்பு பொருந்தவில்லை, சேவையக பதிப்பு '%s' க்ளையன்ட் " "பதிப்பு '%s'உடன் பொருந்தவில்லை. இந்த இரண்டு பதிப்புகளும் சரியாக பொருந்த வேண்டும்.\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: remote: சேவையகம் இயங்காதது போல் உள்ளது\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "" "guestfish: protocol error: துவக்க அழைப்பை சேவையகத்திற்கு அனுப்ப முடியவில்லை\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "guestfish: protocol error: சேவையகத்திலிருந்து குறிநீக்க பதில் இல்லை\n" @@ -2029,42 +2029,42 @@ msgstr "%s: புரவல கோப்புமுறைமையில் ஒ msgid "virt-inspector: no image or VM names given" msgstr "" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 #, fuzzy msgid " Mountpoints:\n" msgstr "ஏற்ம்புள்ளிகளைக் காட்டு" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 #, fuzzy msgid " Filesystems:\n" msgstr "ஒரு கோப்புமுறையை செய்" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr "" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr "" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr "" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr "" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr "" @@ -2895,6 +2895,9 @@ msgstr "" msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "" +#~ msgid "test if file exists" +#~ msgstr "கோப்பு இருந்தால் பரிசோதி" + #~ msgid "could not parse size specification '%s'\n" #~ msgstr "'%s'க்கான பகுப்பு அளவை குறிப்பிட முடியவில்லை\n" diff --git a/po/te.po b/po/te.po index be454cd..38b5b4a 100644 --- a/po/te.po +++ b/po/te.po @@ -8,10 +8,11 @@ msgstr "" "Project-Id-Version: libguestfs.master.libguestfs\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?" "component=libguestfs&product=Virtualization+Tools\n" -"POT-Creation-Date: 2010-09-08 16:31+0100\n" +"POT-Creation-Date: 2010-10-23 16:49+0100\n" "PO-Revision-Date: 2010-01-27 20:03+0530\n" "Last-Translator: Krishna Babu K \n" "Language-Team: Telugu \n" +"Language: te\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -463,9 +464,14 @@ msgstr "ఆదేశమును నిర్వర్తించుట బి msgid "is in configuration state" msgstr "ఆకృతీకరణ స్థితినందు వుందా" -#: fish/cmds.c:149 fish/cmds.c:150 fish/cmds.c:693 fish/cmds.c:698 -msgid "test if file exists" -msgstr "ఫైలు వుంటే పరిశీలించుము" +#: fish/cmds.c:149 fish/cmds.c:698 +#, fuzzy +msgid "test if a directory" +msgstr "డైరెక్టరీను సృష్టించుము" + +#: fish/cmds.c:150 fish/cmds.c:693 +msgid "test if a regular file" +msgstr "" #: fish/cmds.c:151 fish/cmds.c:428 msgid "is launching subprocess" @@ -1331,7 +1337,7 @@ msgstr "" msgid "%s: unknown command\n" msgstr "%s: తెలియని ఆదేశము\n" -#: fish/edit.c:86 +#: fish/edit.c:44 #, c-format msgid "use '%s filename' to edit a file\n" msgstr "ఫైలును సరికూర్చుటకు '%s filename' వుపయోగించుము\n" @@ -1346,7 +1352,7 @@ msgstr "అధిక సమాచారము కొరకు `%s --help' ప్ msgid "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" -"Copyright (C) 2009 Red Hat Inc.\n" +"Copyright (C) 2009-2010 Red Hat Inc.\n" "Usage:\n" " %s [--options] cmd [: cmd : cmd ...]\n" " %s -i libvirt-domain\n" @@ -1375,7 +1381,7 @@ msgid "" " -v|--verbose Verbose messages\n" " -x Echo each command before executing it\n" " -V|--version Display version and exit\n" -"For more information, see the manpage %s(1).\n" +"For more information, see the manpage %s(1).\n" msgstr "" "%s: guest filesystem shell\n" "%s lets you edit virtual machine filesystems\n" @@ -1604,9 +1610,6 @@ msgid "" "\n" " Normally it uses $EDITOR, but if you use the aliases\n" " \"vi\" or \"emacs\" you will get those editors.\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "edit - ప్రతిబింబమునందలి వొక ఫైలును సరికూర్చుము\n" " edit \n" @@ -1621,7 +1624,7 @@ msgstr "" " గమనిక: ఇది పెద్ద ఫైళ్ళు (> 2 MB)కు లేదా \\0 బైట్లు కలిగివున్న బైనరీ ఫైళ్ళకు\n" " యిది నమ్మకంగా పనిచేయదు.\n" -#: fish/fish.c:1125 +#: fish/fish.c:1122 #, c-format msgid "" "lcd - local change directory\n" @@ -1637,7 +1640,7 @@ msgstr "" " guestfish యొక్క ప్రస్తుత డైరెక్టరీను మార్చును. మీరు ఫైళ్ళను ఫలానా స్థానమునకు డౌనులోడు\n" " చేయవలెనంటే ఈ ఆదేశము వుపయోగకరంగా వుంటుంది.\n" -#: fish/fish.c:1134 +#: fish/fish.c:1131 #, c-format msgid "" "glob - expand wildcards in command\n" @@ -1654,7 +1657,7 @@ msgstr "" "ప్రతి విస్తరిత ఆర్గుమెంటు కొరకు ఈ ఆదేశము ఆవృతంగా\n" " వొకసారి నడుచునని గమనించండి.\n" -#: fish/fish.c:1144 +#: fish/fish.c:1141 #, c-format msgid "" "man - read the manual\n" @@ -1663,7 +1666,7 @@ msgid "" " Opens the manual page for guestfish.\n" msgstr "" -#: fish/fish.c:1151 +#: fish/fish.c:1148 #, c-format msgid "" "help - display a list of commands or help on a command\n" @@ -1674,8 +1677,8 @@ msgstr "" " help cmd\n" " help\n" -#: fish/fish.c:1158 -#, c-format +#: fish/fish.c:1155 +#, fuzzy, c-format msgid "" "more - view a file in the pager\n" " more \n" @@ -1687,9 +1690,6 @@ msgid "" "\n" " Normally it uses $PAGER, but if you use the alias\n" " \"less\" then it always uses \"less\".\n" -"\n" -" NOTE: This will not work reliably for large files\n" -" (> 2 MB) or binary files containing \\0 bytes.\n" msgstr "" "more - ఫైలును పేజర్‌నందు దర్శింపచేయును\n" " more \n" @@ -1705,7 +1705,7 @@ msgstr "" " గమనిక: ఇది పెద్ద ఫైళ్ళు (> 2 MB) కొరకు నమ్మకంగా పనిచేయదు\n" " లేదా \\0 బైట్లను కలిగివున్న బైనరీ ఫైళ్ళ కొరకు.\n" -#: fish/fish.c:1176 +#: fish/fish.c:1170 #, c-format msgid "" "quit - quit guestfish\n" @@ -1714,7 +1714,7 @@ msgstr "" "quit - guestfish నిష్క్రమించును\n" " quit\n" -#: fish/fish.c:1181 +#: fish/fish.c:1175 #, c-format msgid "" "reopen - close and reopen the libguestfs handle\n" @@ -1731,7 +1731,7 @@ msgstr "" "యెంచేతంటే guestfish నిష్క్రమించగానే సంభాలిక మూయబడును\n" " పరిశీలన కొరకు యిది అరుదుగా వుపయోగించుబడును.\n" -#: fish/fish.c:1190 +#: fish/fish.c:1184 #, fuzzy, c-format msgid "" "sparse - allocate a sparse image file\n" @@ -1778,7 +1778,7 @@ msgstr "" " E లేదా EB హెగ్జాబైట్ల సంఖ్య\n" " sects 512 బైట్ సెక్టార్ల సంఖ్య\n" -#: fish/fish.c:1211 +#: fish/fish.c:1205 #, c-format msgid "" "supported - list supported groups of commands\n" @@ -1791,7 +1791,7 @@ msgid "" " See also guestfs(3) section AVAILABILITY.\n" msgstr "" -#: fish/fish.c:1223 +#: fish/fish.c:1217 #, c-format msgid "" "time - measure time taken to run command\n" @@ -1806,12 +1806,12 @@ msgstr "" " ఇది సాధారణంగానే నడుస్తుంది, మరియు పట్టిన సమయాన్ని తర్వాత\n" " ముద్రిస్తుంది.\n" -#: fish/fish.c:1231 +#: fish/fish.c:1225 #, c-format msgid "%s: command not known, use -h to list all commands\n" msgstr "%s: తెలియని ఆదేశము, అన్ని ఆదేశములను జాబితాచేయుటకు -h వుపయోగించుము\n" -#: fish/fish.c:1247 +#: fish/fish.c:1241 #, c-format msgid "" "Did you mean to open a disk image? guestfish -a disk.img\n" @@ -1819,17 +1819,17 @@ msgid "" "For complete documentation: man guestfish\n" msgstr "" -#: fish/fish.c:1404 +#: fish/fish.c:1398 #, c-format msgid "Runaway quote in string \"%s\"\n" msgstr "\"%s\" స్ట్రింగునందు రన్‌యెవే స్ట్రింగ్\n" -#: fish/glob.c:52 +#: fish/glob.c:53 #, c-format msgid "use 'glob command [args...]'\n" msgstr "'glob command [args...]' వుపయోగించు\n" -#: fish/glob.c:72 +#: fish/glob.c:73 #, c-format msgid "glob: guestfs_glob_expand call failed: %s\n" msgstr "glob: guestfs_glob_expand కాల్ విఫలమైంది: %s\n" @@ -1849,37 +1849,37 @@ msgstr "" msgid "the external 'man' program failed\n" msgstr "బహిర్గత ఆదేశము విఫలమైంది: %s" -#: fish/more.c:40 +#: fish/more.c:39 #, c-format msgid "use '%s filename' to page a file\n" msgstr "ఒక ఫైలును పేజ్ చేయుటకు '%s filename' వుపయోగించుము\n" -#: fish/prep.c:114 +#: fish/prep.c:37 #, c-format msgid "" "List of available prepared disk images:\n" "\n" msgstr "" -#: fish/prep.c:117 +#: fish/prep.c:40 #, c-format msgid "" -"guestfish -N %-16s %s\n" +"guestfish -N %-8s - %s\n" "\n" "%s\n" msgstr "" -#: fish/prep.c:125 +#: fish/prep.c:48 #, c-format msgid " Optional parameters:\n" msgstr "" -#: fish/prep.c:132 +#: fish/prep.c:55 #, c-format msgid "<%s> %s (default: %s)\n" msgstr "" -#: fish/prep.c:142 +#: fish/prep.c:65 #, c-format msgid "" "Prepared disk images are written to file \"test1.img\" in the local\n" @@ -1887,39 +1887,39 @@ msgid "" "For more information see the guestfish(1) manual.\n" msgstr "" -#: fish/prep.c:179 +#: fish/prep.c:96 #, c-format msgid "" "guestfish: -N parameter '%s': no such prepared disk image known.\n" "Use 'guestfish -N list' to list possible values for the -N parameter.\n" msgstr "" -#: fish/prep.c:241 +#: fish/prep.c:158 #, c-format msgid "guestfish: error creating prepared disk image '%s' on '%s': " msgstr "" -#: fish/prep.c:258 fish/prep.c:265 fish/prep.c:280 +#: fish/prep_disk.c:34 fish/prep_fs.c:34 fish/prep_part.c:34 #, fuzzy msgid "failed to allocate disk" msgstr "ఫైలు ముక్కను పార్శ్ చేయుటలో విఫలమైంది" -#: fish/prep.c:272 fish/prep.c:287 +#: fish/prep_fs.c:41 fish/prep_part.c:41 #, c-format msgid "failed to partition disk: %s" msgstr "" -#: fish/prep.c:297 +#: fish/prep_fs.c:51 #, c-format msgid "failed to create filesystem (%s): %s" msgstr "" -#: fish/rc.c:249 +#: fish/rc.c:250 #, c-format msgid "guestfish: protocol error: could not read 'hello' message\n" msgstr "guestfish: నిభందన దోషము: 'hello' సందేశమును చదువలేక పోయింది\n" -#: fish/rc.c:254 +#: fish/rc.c:255 #, c-format msgid "" "guestfish: protocol error: version mismatch, server version '%s' does not " @@ -1928,17 +1928,17 @@ msgstr "" "guestfish: నిభందన దోషము: వర్షన్ అసమానత, సేవిక వర్షన్ '%s' అనునది క్లైంట్ వర్షన్ '%s'తో " "సరిపోలుట లేదు. రెండు వర్షన్లు తప్పక సరిగ్గా సరిపోలవలెను.\n" -#: fish/rc.c:329 fish/rc.c:343 +#: fish/rc.c:330 fish/rc.c:344 #, c-format msgid "guestfish: remote: looks like the server is not running\n" msgstr "guestfish: remote: సేవిక సరిగ్గా నడుచుచున్నట్లు లేదు\n" -#: fish/rc.c:355 fish/rc.c:369 +#: fish/rc.c:356 fish/rc.c:370 #, c-format msgid "guestfish: protocol error: could not send initial greeting to server\n" msgstr "guestfish: protocol error: సేవికకు ప్రాధమిక అభివాదం పంపలేక పోయింది\n" -#: fish/rc.c:380 +#: fish/rc.c:381 #, c-format msgid "guestfish: protocol error: could not decode reply from server\n" msgstr "guestfish: protocol error: సేవిక నుండి ప్రత్యుత్తరమును డీకోడ్ చేయలేక పోయింది\n" @@ -2021,42 +2021,42 @@ msgstr "%s:హోస్టు ఫైల్‌సిస్టమ్ నందు msgid "virt-inspector: no image or VM names given" msgstr "" -#: inspector/virt-inspector.pl:294 +#: inspector/virt-inspector.pl:302 msgid "--fish output is only possible with a single OS\n" msgstr "" -#: inspector/virt-inspector.pl:324 +#: inspector/virt-inspector.pl:332 msgid "" "virt-inspector: no YAML support, try installing perl-YAML or libyaml-perl\n" msgstr "" -#: inspector/virt-inspector.pl:363 +#: inspector/virt-inspector.pl:371 #, fuzzy msgid " Mountpoints:\n" msgstr "మౌంట్‌పాయింట్లను చూపుము" -#: inspector/virt-inspector.pl:369 +#: inspector/virt-inspector.pl:377 #, fuzzy msgid " Filesystems:\n" msgstr "ఫైల్‌సిస్టమ్ చేయుము" -#: inspector/virt-inspector.pl:387 +#: inspector/virt-inspector.pl:395 msgid " Modprobe aliases:\n" msgstr "" -#: inspector/virt-inspector.pl:398 +#: inspector/virt-inspector.pl:406 msgid " Initrd modules:\n" msgstr "" -#: inspector/virt-inspector.pl:407 +#: inspector/virt-inspector.pl:415 msgid " Applications:\n" msgstr "" -#: inspector/virt-inspector.pl:414 +#: inspector/virt-inspector.pl:422 msgid " Kernels:\n" msgstr "" -#: inspector/virt-inspector.pl:426 +#: inspector/virt-inspector.pl:434 msgid " Windows Registry entries:\n" msgstr "" @@ -2883,6 +2883,9 @@ msgstr "" msgid "virt-win-reg: {p}: could not upload registry file: {err}\n" msgstr "" +#~ msgid "test if file exists" +#~ msgstr "ఫైలు వుంటే పరిశీలించుము" + #~ msgid "could not parse size specification '%s'\n" #~ msgstr "పరిమాణ వివరణలను పార్శ్ చేయలేకపోయింది '%s'\n" -- 1.8.3.1